共查询到20条相似文献，搜索用时 46 毫秒
1.
Daniela Porcino Vito Nicola Ghionna Raffaella Granata Vincenzo Marcianò 《Geomechanics and Geoengineering》2016,11(2):164-175
The purpose of this paper is to investigate mechanical and hydraulic properties of sands treated with mineral-based grouts through the results of a laboratory test programme consisting of unconfined compression tests (UCS), triaxial bender element tests (BeT) and constant flow permeability tests in triaxial apparatus. An improved apparatus was set up for obtaining high quality, multiple grouted specimens from a single column. Two selected natural sands having different grain sizes were grouted with two mineral-based silica grouts, resulting in different levels of improvement. The behaviour of the sands treated by mineral grouts, in terms of strength, initial stiffness and permeability, was compared with that exhibited by more traditional silicate grouts. The results of this study indicate that sands treated with mineral grouts result in higher strengths, higher initial shear modulus and lower permeability values than the sands treated with the silicate solution. The effect of grout type, effective confining pressure, and sand particle-size on small-strain shear modulus of grouted sand specimens was evaluated. Based on test results, the small strain shear modulus increment from treated to untreated specimens has been correlated with the unconfined compressive strength, obtaining a unique relationship regardless of grout type and grain-size of tested sands. 相似文献
2.
In this paper, a numerical model is presented to represent the fracture process in hard rocks based on a pseudo-discontinuum method called the Continuum Voronoi Block Model (CVBM). To validate this tool, numerical models for one Brazilian test, one unconfined compression test, and multiple triaxial compression tests with different confining stress were calibrated to match laboratory test results for Creighton granite. The model proved robust and matched the following macro-properties: crack initiation (CI) stress, (CD) stress, peak strength, tensile strength, Young's Modulus, and Poisson's ratio. The calibrated model served as a basis for a sensitivity study to analyze how micro-properties influence the rock's macroscopic responses. From the sensitivity study, a calibration methodology was proposed, which shall facilitate the use of the CVBM in future works. 相似文献
3.
针对自行研制的岩石空心圆柱扭剪仪可独立控制4个加载参数（轴力、扭力、内围压和外围压）的功能,通过数学和力学分析,系统地整理出几种易于实现且符合实际工程的应力路径及加载方式：在轴力与内围压满足一定关系的前提下,可以获取岩石的抗拉强度,提供一种新型测量岩石抗拉强度的方法;通过控制内外围压及轴力,可以进行常规三轴试验与真三轴试验,克服了现阶段岩石真三轴试验中试验装置复杂、试样加载面摩擦大的缺点;在轴力与内、外围压分别满足一定关系时,可以分别实现平均应力p不变与中主应力系数b不变的应力路径,用于研究应力主轴旋转对岩石力学性质的影响。上述应力路径的实现对岩石力学性质的研究以及现阶段岩石室内试验的发展具有重要意义。 相似文献
4.
大掺量粉煤灰淤泥固化土的强度与耐久性研究 总被引：4，自引：0，他引：4
基于传统水泥和石灰固化处理方法,提出了利用大掺量低钙粉煤灰、水泥和石灰固化剂进行淤泥固化处理的方法,以期改善淤泥的强度和耐久性,达到淤泥和粉煤灰双重资源化利用的目的。通过一系列室内试验,探讨了该方法处理后固化淤泥的击实特征、强度特性、水稳性和耐久性。试验结果表明：淤泥固化后最优含水率有所降低、最大干密度则略有增加;弹性模量、无侧限抗压强度和抗拉强度均有不同程度的增加,水泥掺量越大,养护时间越长,强度和弹性模量越大;固化后淤泥水稳性得到明显改善;浸水软化和冻融循环导致固化土抗压强度显著劣化,冻胀融缩导致设计混合料的无侧限抗压强度减小约22%。 相似文献
5.
击实黏土单轴拉伸特性试验研究 总被引：2，自引：0，他引：2
为研究土的拉伸特性,对击实黏土进行直接拉伸试验。试验表明,不同抗拉强度的击实黏土具有不同的拉伸应力-应变曲线型式,即应变软化型、应变硬化型和应变强化型;在试验涉及的干密度和含水率范围内,击实黏土的抗拉强度随干密度的增加而增加,随含水率的增加而减小,且具有较好的线性关系;拉伸速率对击实黏土的抗拉强度和应力-应变曲线的型式也有明显影响,对同一干密度和含水率的土样,低拉伸速率测得的抗拉强度往往较小,且应力-应变曲线为软化型,而较高的拉伸速率测得的抗拉强度较大,且应力-应变曲线为强化型。 相似文献
6.
Influence of pore pressure on plastic deformation and strength of limestone under compressive stress
This study is devoted to experimental investigation of effects of pore pressure on plastic deformation and failure of a water-saturated limestone. The experimental study is composed of three different groups of laboratory tests. The basic mechanical behavior of the rock is first characterized by drained triaxial compression tests on water-saturated samples without pore pressure. The results are compared with those obtained in a previous study from triaxial compression tests on saturated samples with a constant pore pressure. In the second group, water injection tests under a confining pressure of 20 MPa and different values of deviatoric stress are realized to study the effect of pore pressure increase. Finally, undrained triaxial compression tests are carried out for investigating the coupling effect of plastic deformation and pore pressure variation. Based on experimental data, the validity of effective stress concept for plastic yielding and failure strength is discussed.
相似文献7.
Hossein Rafiei Renani C. Derek Martin Evert Hoek 《Geotechnical and Geological Engineering》2016,34(1):297-312
The Christensen criterion, originally introduced in materials science, has a simple mathematical form and uniaxial tensile and compressive strength as the only parameters, making it an attractive candidate for rock engineering purposes. In this study, the applicability of the criterion to rock materials is examined. Explicit equations for application of the criterion under biaxial, triaxial compression, triaxial extension, and polyaxial states of stresses are derived. A comprehensive strength data set including the results of tests on synthetic rock, chert dyke, Carrara marble and Westerly granite is utilized to examine the accuracy of the Christensen criterion to the failure of rock material. The two surprising findings about the Christensen criterion are the zero values of tensile strength and the very low slopes of the failure envelope obtained from fitting analyses for chert dyke and Westerly granite. It is shown that the two problems are interrelated and the values of tensile strength tend to zero to produce higher slopes. It is then mathematically proven that the maximum initial slope of the Christensen failure envelope is limited to 4 in triaxial compression and 2.5 in triaxial extension which is considerably lower than the slope of experimental data. The accuracy of the Christensen criterion was found to be significantly lower than the well-established Hoek–Brown criterion. The circular π-plane representations and brittle-to-ductile transition limits from the Christensen criterion are also inconsistent with the observed behavior of rocks. 相似文献
8.
取样与施工过程会对天然沉积结构性软黏土产生扰动,使土体的工程性质发生演化,一些学者分别以扰动度和损伤变量两个特征参数对该问题进行了较为深入的研究,但扰动度与描述土体应力状态的损伤变量之间的相关性目前仍未明晰。为此,以连云港天然沉积结构性软黏土进行不同应力路径下快速加载试验模拟土体应力损伤,对损伤后土体进行固结试验和无侧限抗压强度试验,结合张孟喜提出的损伤变量以及两种常用的扰动度（变形和强度）的定义,评价了损伤后土体的损伤变量和扰动度,探讨二者间关系。结果表明,损伤后土体压缩曲线屈服前的斜率并未产生明显改变,即损伤变量与按变形定义的扰动度间关系不明显;而损伤变量与以强度定义的扰动度之间存在线性递增关系,说明了当土体沿着某一路径加载时,越接近破坏线,其损伤程度越高,土体的强度也随之降低。 相似文献
9.
This paper discusses the results of the engineering geological and geotechnical investigations that have been carried out
at the Daroongar dam site. According to the geomorphology and geological conditions and economic reason, the dam has been
designed as an earth dam with a clay core. The dam foundation is composed of a sequence of sandy limestone and limy marl of
the Upper Cretaceous period. This study is based on field and laboratory investigations, surface discontinuity surveying,
drilled borehole data and permeability of dam foundation. The present studies include the evaluation of the dam foundation
by water pressure tests. The water pressure tests indicate the necessity to provide a grout curtain below the dam foundation.The
geology of the Daroongar dam foundation has a significant influence on the permeability and groutability characteristics.
The permeability of jointed rock masses is strongly depended on joint characteristics; degree of jointing, opening, continuity
and presence of filling materials. The laboratory tests included tests for unit weight, porosity, uniaxial, triaxial, tensile
strength and deformation parameters. The strength and modulus of elasticity of rock masses were determined using the Hoek–Brown
empirical strength criterion. The rock mass qualities and classifications of the dam site is assigned using the rock mass
rating (RMR), the rock quality (Q) and the geological strength index (GSI) classification systems. 相似文献
10.
三轴试验是土力学领域控制试样固结条件和加载剪切排水条件测试土的强度、变形特性参数的常用试验,也是研究土的强度及本构关系的重要手段。针对国产三轴试验中分别通过压力室体积变化和密封轴向传力杆量测试样应变和轴向荷载的不足,研制了试样的双室压力室,3组独立的伺服步进电机驱动液压缸活塞的液压体变控制器,开发了能够控制不同加载方式、加载或变形速率的自动控制系统和计算控制程序及操作界面。双室压力室的内外腔各自由一组伺服步进电机驱动液压缸活塞的液压体变控制器施加与固结围压相同的液压;试样上端部轴向传力轴固定于压力室顶部,且连接荷载传感器量测试样承受的轴向荷载,试样下端部承受竖向加载轴作用,且与压力室底座密封,竖向加载轴的荷载由一组独立的伺服步进电机驱动液压缸活塞的液压体变控制器控制竖向加载轴下端连接的液压缸加载。该仪器能够自动量测轴向荷载、轴向变形、试样外体变、试验孔隙水压力、压力室内外腔压力。试验验证表明,该仪器系统性能稳定,提高了量测精度,具有构造简单、操作简便、自动化程度高、生产成本低等特点。 相似文献
11.
城市固体废弃物的剪切强度机理及本构关系 总被引：2，自引：0，他引：2
根据城市固体废弃物（简称MSW）的大三轴固结排水剪试验结果,延伸岩土工程中研究土体的概念和方法,研究MSW的剪切强度机制。MSW与大变形相关的强度特性主要是由于含有大量的纤维状成分所致,在剪切过程中试样总的抗剪能力由剪切面上的摩擦力和纤维状加筋相的拉力所产生。MSW的摩擦强度主要由3部分构成：纤维状成分与土颗粒之间的摩擦,纤维状成分之间的摩擦,和土颗粒之间的摩擦。基于MSW的剪切强度特性,采用邓肯-张本构模型来描述MSW的应力-应变关系。 相似文献
12.
为研究温度和湿度对生土力学特性的影响,自主研发了温、湿控制生土三轴试验装置。基于常规三轴压力室,借助电涡流非接触位移传感器搭建高精度变形测试系统,实现环境变化下生土应变的连续性捕捉。针对法国里昂地区生土材料,开展不同湿度、围压和温度作用下生土三轴循环加载-卸载试验,实测生土在不同工况下的三轴剪切破坏强度、应力-应变曲线及体积变化,通过分析滞回曲线,研究弹性模量和残余应变随应力水平的演化特征;同时进行了变湿度条件下生土气态水迁移效应试验。结果表明：该装置能够稳定控制生土环境变化条件,模拟再现生土单元体实际服役工况,精确测量试验过程中生土力学指标及湿度、温度与压力等环境指标,初步检验了装置性能的可靠性和准确性。相关成果可为荷载-湿-热耦合作用下非饱和生土变形机制的研究与本构模型的建立提供技术支撑。 相似文献
13.
聚氨酯是一种高聚物,可以通过填充孔隙、胶结土颗粒的作用达到提高强度和整体性的目的。采用聚氨酯对海砂进行固化处理,设计无侧限抗压强度试验和三轴剪切试验,分析不同胶凝时间和不同固化剂含量下固化海砂的强度特性和变形特性。试验结果表明,随着胶凝时间的增加,固化海砂的强度提高,在固化时间3 h时就可达到稳定强度的80%以上,并且在试验所采取的质量比范围内,质量比越高,固化效果越好;聚氨酯泡沫填充到孔隙中使颗粒之间的咬合力增大,增强了黏聚力;颗粒重排列的阻力增大,使得海砂抵抗变形的能力增加,峰值强度提高,静力特性发生明显变化。 相似文献
14.
Planes of weakness like schistosity and foliation affect the strength and deformational behaviors of rocks. In this paper, an attempt has been made to study the elastic and strength behavior of slate rocks obtained from foundation of Sardasht dam site in Iran. Wet and dry specimens with different orientation of foliation were evaluated under uniaxial, triaxial, and Brazilian tests. According to the results obtained, slate mechanically pronounced U-shaped anisotropy in uniaxial and triaxial compression tests. In addition, the degree of anisotropy for the slates tested in current study was relatively high, showing the effect of foliation plane on strength and elastic parameters. It was concluded that stiffness of the samples decrease as the angle of anisotropy reaches 30–40°. This change was more pronounced for wet comparing to dry samples. However, the tensile strength obtained during Brazilian tests indicated that there is no apparent relationship between angle of anisotropy and tensile strength. However, increasing the water saturation decreased the tensile strength of the samples. The calculated elastic moduli referring to different anisotropy angles could be valuable for the design of various engineering structures in planar textured rock masses. 相似文献
15.
采用大型高压多功能静动三轴试验机,对某面板堆石坝闪长岩类堆石料进行了动弹性模量与阻尼比试验和动残余变形试验,研究了主堆石料、过渡料和垫层料3种坝料在循环荷载下的动应力-应变特性和动残余变形特性及其主要影响因素。试验结果表明,材料的动应力-应变关系受剪应变水平的影响较大,各种材料的动弹性模量随剪应变的增加发生衰减,而阻尼比则相应增大;围压的增加引起材料的最大动弹性模量的增加,但围压力对材料动弹模增长的影响是有限的;固结主应力比的增大,会引起有效球应力的增加,从而使材料的最大动弹性模量增大。此外,从试验结果和模型参数来看,各种材料的动应力-动应变变化规律以及动变形随振次的发展规律均可以用修正等价黏弹性模型和沈珠江残余变形经验公式进行描述 相似文献
16.
平面应变仪是一种开发较早但至今尚不完善的一种土工试验仪器,随着国家基础设施建设的发展,平面应变试验及试验方法在许多领域得以应用,显示出了平面应变试验在工程设计和研究中的重要性。通过回顾国内外平面应变仪的发展,提出了开发一种新型的土工平面应变三轴仪的思路,以实现更科学、更精确地进行复杂应力加载条件下土平面应变试验的研究。以此为目的,从压力室结构、加载系统及控制量测系统等方面提出了相应的改善措施,开发了一种新型的土工平面三轴仪。并通过重塑黄土的平面应变试验及改进的真三轴仪平面应变试验对比、以及平面应变试验强度参数与常规三轴试验强度参数对比分析,验证了所研制的新型卧式土工平面应变仪的合理性和研制思路的正确性。最后,通过对该平面应变仪应变试验的黄土破坏特性与改进真三轴平面应变试验的黄土破坏特征的对比分析,验证了本文所开发的平面应变仪在描述土体应变局部化问题的合理性。 相似文献
17.
Hanifi Missoum Mostefa Belkhatir Karim Bendani Mustapha Maliki 《Geotechnical and Geological Engineering》2013,31(1):279-296
In a number of recent case studies, the liquefaction of silty sands has been reported. To investigate the undrained shear and deformation behaviour of Chlef sand–silt mixtures, a series of monotonic and stress-controlled cyclic triaxial tests were conducted on sand encountered at the site. The aim of this laboratory investigation is to study the influence of silt contents, expressed by means of the equivalent void ratio on undrained residual shear strength of loose, medium dense and dense sand–silt mixtures under monotonic loading and liquefaction potential under cyclic loading. After an earthquake event, the prediction of the post-liquefaction strength is becoming a challenging task in order to ensure the stability of different types of earth structures. Thus, the choice of the appropriate undrained residual shear strength of silty sandy soils that are prone to liquefaction to be used in engineering practice design should be established. To achieve this, a series of undrained triaxial tests were conducted on reconstituted saturated silty sand samples with different fines contents ranging from 0 to 40 %. In all tests, the confining pressure was held constant at 100 kPa. From the experimental results obtained, it is clear that the global void ratio cannot be used as a state parameter and may not characterize the actual behaviour of the soil as well. The equivalent void ratio expressing the fine particles participation in soil strength is then introduced. A linear relationship between the undrained shear residual shear strength and the equivalent void ratio has been obtained for the studied range of the fines contents. Cyclic test results confirm that the increase in the equivalent void ratio and the fines content accelerates the liquefaction phenomenon for the studied stress ratio and the liquefaction resistance decreases with the increase in either the equivalent void ratio or the loading amplitude level. These cyclic tests results confirm the obtained monotonic tests results. 相似文献
18.
Saad A. Aiban 《Engineering Geology》1995,39(3-4):203-215
The increasing number of construction projects and the lack of good quality soil for use in these projects in eastern Saudi Arabia necessitate the use of available marginal soils. Most, if not all, engineering projects use the fine-grained calcareous sediments, known locally as marl, either as a foundation material or as a fill material. The lack of published information on their engineering characteristics and behavior under ambient conditions has resulted in many construction and post-construction problems. This investigation is one of a series to evaluate the geotechnical properties of selected marl soils obtained from different areas in eastern Saudi Arabia. Marl samples, obtained from Abqaiq, were prepared in the laboratory under controlled conditions and subjected to different tests including CBR (soaked and unsoaked), triaxial compression, unconfined compression and one-dimensional compression tests. Samples were prepared at different moisture contents on both the wet and dry sides of optimum. X-ray diffraction analysis indicates that this marl contains high percentages of dolomite and calcite, in addition to other materials. The molding water content significantly affects the engineering properties of this material. Compaction on the dry side of optimum resulted in samples that have some swelling potential and highly compressible characteristics when subjected to a load after inundation. 相似文献
19.
不同应力路径下某高速公路路基黏性土湿化变形试验研究 总被引：2，自引：0，他引：2
针对某高速公路黏性填土路基浸水湿化的情况,进行了大量室内试验研究。为了研究土在实际应力路径下的湿化变形规律,分别在常规三轴应力路径、常规三轴K0固结应力路径、K0固结+常规三轴压缩应力路径以及使用真三轴仪的平面应变下K0固结 + 平面应变剪切应力路径和平面应变等应力比路径下进行了黏性土的湿化试验。通过对试验数据的分析,得到了湿化附加轴向应变与湿化时应力水平的幂函数关系。通过总结研究不同应力路径下应力-应变曲线的规律,提出了不同应力路径下的应力-应变关系的公式。 相似文献
20.
An Example of Realistic Modelling of Rock Dynamics Problems: FEM/DEM Simulation of Dynamic Brazilian Test on Barre Granite 总被引：2，自引：1，他引：1
The scope of this study is to numerically simulate the behaviour of Brazilian disc specimens as observed in laboratory during dynamic, high-strain rate, indirect tensile tests using an innovative combined finite-discrete element method (FEM/DEM) research code. Laboratory experiments using a split Hopkinson pressure bar (SHPB) apparatus were conducted by the authors and the measured indirect tensile strength values were used to verify the FEM/DEM models. In the models the applied boundary conditions, related to the loading rate of the specimen, were matched with the experimental observations. The results of the numerical simulations, including tensile strength and failure time, are in agreement with the laboratory findings. The main failure mechanisms, i.e. tensile splitting along loading axis and shear failure close to loading platens are captured by the numerical model. A linear relationship between tensile strength and loading rate is found for the range of dynamic strain rates tested and simulated. The simulation results are in good agreement with laboratory observations and demonstrate the potential for using FEM/DEM to realistically model dynamic response of rocks. 相似文献