首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 221 毫秒
1.
Most types of coal in Turkey are generally low in rank: lignite, and subbituminous. Most of the coal was formed during the Miocene, Eocene, and Pliocene ages. There are only a few thin Jurassic-age coal occurrences in Turkey. Pennsylvanian age bituminous coal is found on the Black Sea coast. General implications of the petrographic properties of Turkey's coal seams and coal deposits have not yet been taken into consideration comparatively or as a whole.For this study, about 190 channel samples were collected from different locales. The composite profile samples of the seams were taken into considerations. The content and depositional properties as well as some chemical and physical properties of the main coal seams are compared. All coal samples tend to have similar coal petrographic properties and were deposited in intermontane lacustrine basins. Later, they were affected by faulting and post-depositional volcanic activity. As a result, there are variations in the properties and rank of the coal samples. The most abundant coal maceral group is huminite and the most abundant maceral is gelinite. The liptinite and inertinite contents of the coal are low and the maceral contents of the coals show great similarity. The depositional environments of the all coals are lacustrine dominated.  相似文献   

2.
The Kalol oilfield in the Cambay graben, Gujarat. western India, is known to contain thick seams of lignite in the Kalol Formation (Middle Eocene), overlying the oil-bearing Cambay Black Shale (Lower Eocene), at depths between 1110 m and 1500 m. The Kalol Formation occurs in the northern portion of the Cambay Basin as a wedge-shaped sequence of regressive and transgressive marine environments, the lignite being confined to the former phase.Chemically, the Kalol lignite is characteristically low in moisture (4.45–4.64%), quite low in ash (1.67-10.82%) and high in volatiles (43.56–55.25%). C is 72.39–77.18%, H is 4.47–5.93%, N is 1.16–1.58%, O is 15.73–18.62%, and S is 0.32–0.86%. According to Seyler's classification, the Kalol lignite can be classified as belonging to rank (a) lower than lignitous, (b) perlignitous, (c) ortholignitous, (d) metalignitous, and (e) bituminous. According to North American (ASTM) classification, utilising data on volatiles and Rm oil, the lignite belongs to lignite, sub-bituminous C and low volatile bituminous rank.Petrographically, the Kalol lignite is composed of huminite (50–81%), liptinite (1–16%), and inertinite (6–32%). Inertinite comprises mainly sclerotinite as plectenchyma, fusinite being absent. Exsudatinite is quite common. On the basis of microlithotype, the lignite comprises textile (1–13%), detrite (19–69%), liptitextite (1–10%), liptidetrite (4–16%), inertidetrite (1–25%), detrinertite (3–21%), and inertite (5–26%), with shale (5–12%). Rm oil varies from 0.30 to 0.40. The bituminous coal sample is high in shaly matter (53%) and composed of vitrinite (16%) and sclerotinite (29%), the former showing Rm 1.80.These studies indicate that the chemical and petrographic constitution of the lignite is favourable for underground gasification.  相似文献   

3.
In the Carpathian Flysch, coal is present either as exotics of Carboniferous coal deposits or as autochthonous, thin layers of lustrous coal. This paper present the results of the studies of coal-bearing rocks that are coeval with the enclosing flysch sediments. These coals form lenses up to 0.15 m thick. Their morphology precludes an exotic origin. The main petrographic component is collinite with admixtures of poorly fluorescing telinite. Minor components are: exudatinite, sporinite, fusinite, micrinite and sclerotinite. Mineral matter consists of framboidal pyrite clay minerals and quartz.The random reflectance of telocollinite varies from 0.38% to 0.72%, which corresponds to subbituminous and bituminous ranks. Correlation between chemical analysis, coking properties and relfectance measurements, leads to the conclusion that boundary between subbituminous and bituminous coals should be defined by the following values: C=80wt%, VOLATILES=43wt%; calorific VALUE=32.3 MJ/kg; and Ro=0.56–0.57%.Atypical properties, such as: upper C value (75–80wt%); high volatile matter contents (over 43wt%) and low random reflectance (o about 0.38–0.57%) in subbituminous coals; low C value (about 80–82wt%); low reflectance (0.56–0.72%); and good coking properties, of the bituminous coals are attributed to quick coalification during increasing temperature as a result of tectonic stress.  相似文献   

4.
The Antaramut–Kurtan–Dzoragukh (AKD) coal deposit is a previously unrecognized coal field in north-central Armenia. Coal has been known to exist in the general vicinity since the turn of the century, but coal was thought to be restricted to a small (1 km2) area only near the village of Antaramut. However, through detailed field work and exploratory drilling, this coal deposit has been expanded to at least 20 km2, and thus renamed the Antaramut–Kurtan–Dzoragukh coal field, for the three villages that the coal field encompasses. The entire coal-bearing horizon, a series of tuffaceous sandstones, siltstones, and claystones, is approximately 50 m thick. The AKD coal field contains two coal beds, each greater than 1 m thick, and numerous small rider beds, with a total resource of approximately 31,000,000 metric tonnes. The coals are late Eocene in age, high volatile bituminous in rank, relatively high in ash yield (approximately 40%, as-determined basis) and moderate in sulfur content (approximately 3%, as-determined basis). The two coal beds (No. 1 and No. 2), on a moist, mineral-matter-free basis, have high calorific values of 32.6 MJ/kg (7796 cal/g) and 36.0 MJ/kg (8599 cal/g), respectively. Coal is one of the few indigenous fossil fuel resources occurring in Armenia and thus, the AKD coal field could potentially provide fuel for heating and possibly energy generation in the Armenian energy budget.  相似文献   

5.
The gravity of Ethiopian energy problem has initiated studies to explore various energy resources in Ethiopia, one among this is the exploration for coal resources. Studies confirmed the presence of coal deposits in the country. The coal-bearing sediments are distributed in the Inter-Trappean and Pre-Trap volcanic geological settings, and deposited in fluvio-lacustrine and paludal environments in grabens and half-grabens formed by a NNE–SSW and NNW–SSE fault systems. Most significant coal deposits are found in the Inter-Trappean geological setting. The coal and coal-bearing sediments reach a maximum thickness of 4 m and 300 m, respectively. The best coal deposits were hosted in sandstone–coal–shale and mudstone–coal–shale facies. The coal formations of Ethiopia are quite unique in that they are neither comparable to the coal measures of the Permo-Carboniferous Karroo Formation nor to the Late Devonian–Carboniferous of North America or Northwestern Europe. Proximate analysis and calorific value data indicated that the Ethiopian coals fall under lignite to high volatile bituminous coal, and genetically are classified under humic, sapropelic and mixed coal. Vitrinite reflectance studies confirmed 0.3–0.64% Ro values for the studied coals. Palynology studies confirmed that the Ethiopian coal-bearing sediments range in age from Eocene to Miocene. A total of about 297 Mt of coal reserve registered in the country. The coal reserve of the country can be considered as an important alternative source of energy.  相似文献   

6.
The U.S. Geological Survey (USGS) and the Turkish General Directorate of Mineral Research and Exploration (Maden Tetkik ve Arama Genel Müdürlügü, MTA) are working together to provide a better understanding of the chemical properties of Turkish coals from major Turkish lignite producing areas.The coals in Turkey are generally low rank (lignite or subbituminous) formed in several different depositional environments at different geologic times and have differing chemical properties. Eocene coals are limited to northern Turkey; Oligocene coals, found in the Thrace Basins of northwestern Turkey, are intercalated with marine sediments; Miocene coals are generally located in Western Turkey. The coal deposits, which have limnic characteristics, have relatively abundant reserves. Pliocene–Pleistocene coals are found in the eastern part of Turkey. Most of these coals have low calorific values, high moisture, and high ash contents.Analysis of 143 coal channel samples (most are lignite and subbituminous in rank, but a few are bituminous and one is anthracitic in rank) has been completed for up to 54 elements and other coal properties using a variety of analytical techniques, including inductively coupled plasma emission and mass spectrometry, instrumental neutron activation analysis, and various single element techniques and ASTM standard procedures. Many of these coals have elemental concentrations similar to U.S. lignites found in the Gulf Coast and Fort Union regions. However, maximum or mean concentrations of B, Cr, Cs, Ni, As, Br, Sb, Cs, and U in Turkey are higher than the corresponding maximum or mean values found in either the Fort Union or Gulf Coast regions.  相似文献   

7.
冀北榆树沟煤矿区褐煤地下气化地质条件分析   总被引：1，自引：0，他引：1  
通过对冀北沽源县榆树沟煤矿白芈系青石砬组含煤地层地质条件进行分析,认为仵该矿区进行煤炭地下气化是可行的。研究区构造简单,为一轴向近东西向的舒缓向斜,主要煤层厚度大,最大平均厚度为24.31m。可采煤层顶板多为泥岩、炭质泥岩,尤其是煤系上覆的“三趾马红土”层,对气体有良好的圈闭作用。由于褐煤的灰分含量高,26％～49．03％,地下气化时对煤层顶板影响小,主要煤层埋藏浅200—300m,水文地质条件简单,根据诸多因素分析认为该矿区适合进行褐煤地下气化开采。  相似文献   

8.
《Sedimentology》2018,65(3):775-808
Fluvial systems in which peat formation occurs are typified by autogenic processes such as river meandering, crevasse splaying and channel avulsion. Nevertheless, autogenic processes cannot satisfactorily explain the repetitive nature and lateral continuity of many coal seams (compacted peats). The fluvial lower Palaeocene Tullock Member of the Fort Union Formation (Western Interior Williston Basin; Montana, USA ) contains lignite rank coal seams that are traceable over distances of several kilometres. This sequence is used to test the hypothesis that peat formation in the fluvial system was controlled by orbitally forced climate change interacting with autogenic processes. Major successions are documented with an average thickness of 6·8 m consisting of ca 6 m thick intervals of channel and overbank deposits overlain by ca 1 m thick coal seam units. These major coal seams locally split and merge. Time‐stratigraphic correlation, using a Cretaceous–Palaeogene boundary event horizon, several distinctive volcanic ash‐fall layers, and the C29r/C29n magnetic polarity reversal, shows consistent lateral recurrence of seven successive major successions along a 10 km wide fence panel perpendicular to east/south‐east palaeo‐flow. The stratigraphic pattern, complemented by stratigraphic age control and cyclostratigraphic tests, suggests that the major peat‐forming phases, resulting in major coal seams, were driven by 100 kyr eccentricity‐related climate cycles. Two distinct conceptual models were developed, both based on the hypothesis that the major peat‐forming phases ended when enhanced seasonal contrast, at times of minimum precession during increasing eccentricity, intensified mire degradation and flooding. In model 1, orbitally forced climate change controls the timing of peat compaction, leading to enhancement of autogenic channel avulsions. In model 2, orbitally forced climate change controls upstream sediment supply and clastic influx determining the persistence of peat‐forming conditions. At the scale of the major successions, model 2 is supported because interfingering channel sandstones do not interrupt lateral continuity of major coal seams.  相似文献   

9.
The coal deposits of Meghalaya occur in the Lakadong Sandstone (25–250 m thick) of Eocene age. The coal-bearing formations are understood to have been deposited over platform areas in estuarine and lagoonal environments and subjected to recurrent marine transgressions and regressions during the Eocene period. There are three major groups of coalfields in Meghalaya, viz. Garo Hills (West Daranggiri and Siju Coalfields), Khasi Hills (Langrin and Mawlong–Shella Coalfields) and minor coalfields (Laitryngew, Cherrapunji and Bapung Coalfields). Pillar coal samples have been collected from 10 seams at 15 locations and have been subjected to a detailed petrographic examination for their characterization. An effort has been made to trace the path of their evolution based on coal petrography-based models. The quantitative petrographic analysis shows that these coals are vitrinite rich (45.0–92.9%, mean 73.4% mmf basis) with low concentration of inertinite (0.0–13.8%, mean 3.0% mmf basis), whereas the liptinite occurs in appreciable concentration (5.5–53.1%, mean 22.5% mmf basis). Further, these coals are rich in vitrite (51.6–100%, mean 78.3% mmf basis). The volatile matter (from 38.5% to 70.0%, d.a.f.) and vitrinite reflectance (Rom from 0.37% to 0.68%) characterize these coals, as per German (DIN) and North American classification, approximately as sub-bituminous ‘C' to high volatile ‘C' bituminous. The occurrence of teleutospore (single, double and triple celled) suggests that these coals have originated from a characteristic Tertiary flora. The maceral and microlithotype composition in the coal petrography-based depositional models suggest that the coals of Garo Hills were formed in reed to open water swamps in telmatic to limnic conditions. The coals of Khasi Hills were dominated by forest swamps and telmatic to limno-telmatic conditions. In addition, the occurrence of large-size resins suggests prolific growth of conifers in the swamps.  相似文献   

10.
The bituminous coals of the Mecsek Mountains were formed during the Early Lias and are of paralic origin. The limnic complex of the layers consists of sandstone, aleurite and coal, and the upper layer contains marl of marine origin. The 9–15 minable coal seams have a thickness of 1.2–14.0 m. The Mecsek Coal Field and the coal complex within it show a folded and fractured structure, and with regard to their mechanical behaviour, are strongly stressed.75–90% of the coal material is vitrinite, and 1–14% is inertinite. The quantity of liptinite is smaller than 9%. The coal rank is that of gas coal and fat coal with a reflectivity of 0.85–1.5%, respectively. The coal rank differences and variations according to zones are the consequence of forces of various magnitude that occurred in the course of orogenic movements.During the Early Cretaceous, there was some under-sea-bed volcanic activity in this field, the diabasic material of which appeared in the form of a bed vein along the coal seams, and this has exerted a strong metamorphic influence on the coal. It has resulted in thermo-contact alteration, i.e. in the appearance of natural coke and semicoke of various degrees of metamorphism. This alteration badly affected the quality and technological characteristics, especially the cokability of the coal.  相似文献   

11.
The Cr and Ni contents are high in the Eocene lignite of the Shenbei coalfield, which is a small intracontinental basin located in Liaoning Province, China. In this paper, we studied the distribution, origin and occurrence of Cr, Ni and other hazardous trace elements in the Shenbei lignite on the basis of coal petrology, and geochemistry of the lignite and combustion products. The following conclusions on the Shenbei lignite can be drawn: (1) The dominant maceral group in the Shenbei coal is huminite (humodetrinite), accounting for 96%–99% of the total maceral. Inertinite content is less than 1%. Liptinite content (sporinite and cutinite) is 0.2–1.6%. Common minerals in the Shenbei lignite include clay minerals (kaolinite), pyrite and quartz, and calcite and siderite. Chromite is not present in the lignite. (2) Potentially hazardous trace elements such as Co (22 μg/g), Cr (79 μg/g), Cu (63 μg/g), Zn (93 μg/g), V (88 μg/g) and Ni (75 μg/g) are strongly enriched in the Shenbei lignite compared with average concentration of trace elements in the Chinese coal and worldwide lignite. These elements are mainly associated with fulvic acid (FA) and/or coal organic macromolecular compounds in most of the studied lignite samples, indicating an organic association and enrichment of these elements in the Shenbei lignite. (3) Unusually high trace elements contents in the Shenbei lignite are derived mainly from the olivine basalt (country rock of coal basin) that consists of 52.7% plagioclase, 17.8% pyroxene, 14% olivine and 15.5% Ti–Fe oxide minerals. These olivine basalts have higher Cr, Ni, Pb and Zn contents than other types of rock and worldwide basalts do. (4) Fly ash of the Shenbei lignite, with 90% 1–50 μm amorphous particles and 8% 1–10 μm cenosphere, has high contents of Zn (23,707 μg/g), Be (12 μg/g), Sr (1574 μg/g), Pb (486 μg/g) and Cr (349 μg/g). In particular, the ferruginous micro-cenoshperes contain 1–12.79% Zn. Fine bottom ash (<0.031mm) of the Shenbei lignite has higher contents for most of the elements with the exception of Mo, Sn and Zn. Therefore, the potentially environmental and health impact of the fly ash and fine bottom ash should constitute a major concern.  相似文献   

12.
The Buller Coalfield on the West Coast of the South Island, New Zealand, contains the Eocene Brunner Coal Measures. The coal measures unconformably overlie Paleozoic-Cretaceous basement rocks and are conformably overlain by, and laterally interfinger with, the Eocene marine Kaiata Formation. This study examines the lithofacies frameworks of the coal measures in order to interpret their depositional environments. The lower part of the coal measures is dominated by conglomeratic lithofacies that rest on a basal erosional surface and thicken in paleovalleys incised into an undulating peneplain surface. These lithofacies are overlain by sandstone, mudstone and organic-rich lithofacies of the upper part of the coal measures. The main coal seam of the organic-rich lithofacies is thick (10–20 m), extensive, locally split, and locally absent. This seam and associated coal seams in the Buller Coalfield are of low- to high-volatile bituminous rank (vitrinite reflectance between 0.65% and 1.75%). The main seam contains a variable percentage of ash and sulphur. These values are related to the thickening and areal distribution of the seam, which in turn, were controlled by the nature of clastic deposition and peat-forming mire systems, marine transgression and local tidal incursion. The conglomeratic lithofacies represent deposits of trunk and tributary braided streams that rapidly aggraded incised paleovalleys during sea-level stillstands. The main seam represents a deposit of raised mires that initially developed as topogenous mires on abandoned margins of inactive braidbelts. Peat accumulated in mires as a response to a rise in the water table, probably initially due to gradual sea-level rise and climate, and the resulting raised topography served as protection from floods.The upper part of the coal measures consists of sandstone lithofacies of fluvial origin and bioturbated sandstone, mudstone and organic-rich lithofacies, which represent deposits of paralic (deltaic, barrier shoreface, tidal and mire) and marine environments. The fluvial sandstone lithofacies accumulated in channels during a sea-level stillstand. The channels were infilled by coeval braided and meandering streams prior to transgression. Continued transgression, ranging from tidal channel-estuarine incursions to widespread but uneven paleoshoreline encroachment, accompanied by moderate basin subsidence, is marked by a stacked, back-stepping geometry of bioturbated sandstone and marine mudstone lithofacies. Final retrogradation (sea-level highstand) is marked by backfilling of estuaries and by rapid landward deposition of the marine Kaiata Formation in the late Eocene.  相似文献   

13.
张磊  田苗苗  曾世攀  郭鲁成  卢硕  唐俊 《岩土力学》2022,43(11):3015-3026
中国包含多种煤阶煤层,由于煤质、地质条件等差异,不同煤层中的水分赋存情况也具有较大差异性。煤阶、饱水度作为影响液氮低温致裂效果的两个重要因素,有必要对其进行深入研究。为此,分别选择褐煤、烟煤与无烟煤3种煤阶煤样,并制备得出饱水度分别为0%、33%与99%的煤样进行液氮溶浸处理,使用摄像机定点拍摄、观察煤样表面宏观裂隙处理前后的演化规律,并对煤样进行氮气渗流试验。试验结果表明：液氮溶浸后褐煤因产生的一条与多条贯穿裂隙发生整体结构上的断裂,烟煤表面有新裂隙产生,原生宏观裂隙有一定的扩展与延伸,无烟煤表面宏观裂隙无明显发育;煤样饱水度越高,液氮的致裂增透效果越显著;液氮溶浸对3种煤阶煤样的致裂增透效果关系为：褐煤>烟煤>无烟煤,在完全干燥状态下,由于热应力不足以破坏颗粒间链接,烟煤与无烟煤的增透效果近似相等;对于褐煤,液氮溶浸处理对完全干燥状态下的煤体即产生有效致裂,渗透率平均增幅高达559.35%,对于烟煤,在饱水度为33%和99%的状态下,液氮溶浸对煤体具有明显致裂效果,渗透率平均增幅分别为330.60%和448.77%,对于无烟煤,在饱水度为99%的状态下液氮溶浸处理才能对煤体产生有效致裂,渗透率平均增幅为185.53%。  相似文献   

14.
This paper presents geological settings, stratigraphy, coal quality, petrography, reserves and the tectonic history of the Mongolian coal-bearing basins. This is based on a synthesis of the data from nearly 50 coal deposits. The results of ultimate and proximate analyses, and calorific value, maceral composition and vitrinite reflectance data is given.The coal deposits of Mongolia tend to become younger from west to east and can be subdivided into two provinces, twelve basins, and three areas. Main controlling factor of coal rank is the age of the coal bearing sequences. Western Mongolian coal-bearing province contains mostly high rank bituminous coal in strata from Late Carboniferous. The basins in southern Mongolia and the western part of central Mongolia have low rank bituminous coal in strata from the Permian. The northern and central Mongolian basins contain mainly Jurassic subbituminous coal, whereas the Eastern Mongolian province has Lower Cretaceous lignite. The Carboniferous, Permian and Jurassic coal-bearing sequences were mainly deposited in foreland basins by compressional tectonic event, whereas Cretaceous coal measures were deposited in rift valleys caused by extensional tectonic event. Petrographically, Mongolian coals are classified as humic type. Vitrinite/huminite groups of Carboniferous, Permian, and Cretaceous coal range from 44.9% to 82.9%. Inertinite group varies between 15.0% and 53.3%, but liptinite group does not exceed more than 7%. Jurassic coals are characterized by high percentages of vitrinite (87.3% to 96.6%) and liptinite groups (up to 11.7%). This might be explained by paleoclimatic conditions. Mongolian coal reserves have been estimated to be 10.2 billion tons, of which a predominant portion is lignite in the Eastern Mongolian province and coking coal in the South Gobi basin.  相似文献   

15.
A typical case of coal-derived oils in China, i.e. the crude oils from the Middle-Lower Jurassic coal measure strata in the Turpan Basin, is presented. By means of oil-source correlation, it is confirmed that low maturity crude oil in the Shengjinkou oil field is derived from the coal-bearing Qiketai Formation of Middle Jurassic age, a brackish lacustrine sediment. Mature crude oils in the Qiketai oil field, and in well Taican 1, are sourced from the Badaowan Formation of Lower Jurassic age, which contains coal seams as thick as 100 m. Results show that commercial accumulations of liquid crude oils can be generated from coals and coal measure strata containing high volatile coal of bituminous rank. Despite unfavourable types of source material, the total hydrocarbon-generating potential can be great due to the unusual abundance of organic matter.  相似文献   

16.
Approximately 4.7 billion t of original coal resources, ranging from lignite A to subbituminous C in rank, are estimated to be present in the Sonda coal field. These resources occur in 10 coal zones in the Bara Formation of Paleocene age. The Bara Formation does not out crop in the area covered by this report. Thin discontinuous coal beds also occur in the Sonhari Member of the Laki Formation, of Paleocene and Eocene age, but they are unimportant as a resource of the Sonda coal field.The coal resource assessment was based on 56 exploratory drill holes that were completed in the Sonda field between April 1986 and February 1988. The Sonda coal field is split into two, roughly equal, areas by the southwestward flowing Indus River, a major barrier to the logistics of communications between the two halves. As a result the two halves, called the Sonda East and Sonda West areas, were evaluated at different times by slightlydifferent techniques; but, because the geology is consistent between the two areas, the results of both evaluations have been summarized in this report. The resource estimates for the Sonda East area, approximately 1,700 million t, were based on the thickest coal bed in each zone at each drill hole. This method gives a conservative estimate of the total amount of coal in the Sonda East area. The resource estimates for the Sonda West area, approximately 3,000 million t, were based on cumulative coal bed thicknesses within each coal zone, resulting in a more liberal estimate. In both cases, minimum parameters for qualifying coal were a thickness of 30 cm or greater and no more than 50% ash; partings thicker than 1 cm were excluded. The three most important coal zones in the Sonda field are the Inayatabad, the Middle Sonda and the Lower Sonda. Together, these three coal zones contain 50% of the total resources. Isopachs were constructed for the thickest coal beds in these three coal zones and indicate large variations in thickness over relatively small distances. Coal beds in the Sonda coal field were difficult to correlate because of poor core recovery in some intervals and abrupt lateral thinning and thickening. Most coal zones are separated by 5–10 m of interburden, although in some places the interburden between zones is over 100 m thick. More closely spaced drill holes should clarify and significantly improve coal zone correlations in the Bara Formation.Coal resources in the Sonda coal field were calculated for three reliability categories; measured, indicated, and inferred. The most reliable estimates are those for the measured category. Measured coal resources are approximately 91 million t, or about 2% of the total resource; indicated resources are 681 million t, or about 14% of the total; and inferred resources, the least reliable resource category, are 3,931 million t, or 84% of the total resources. The distribution of resources by reliability category is due to the relatively wide spacing (approximately 5 km) between core holes.Analyses of 90 coal samples, on an as-received basis, indicate average ash and sulfur contents of 13.7% and 3.6%, respectively, and a range in rank from lignite A to subbituminous C. Calorific values for these samples range from 6,000 to 8,000 Btu/lb (1 Btu = 1055J; 1 lb = 4536 kg).  相似文献   

17.
Thermal maturity was determined for about 120 core, cuttings, and outcrop samples to investigate the potential for coalbed gas resources in Pennsylvanian strata of north-central Texas. Shallow (< 600 m; 2000 ft) coal and carbonaceous shale cuttings samples from the Middle-Upper Pennsylvanian Strawn, Canyon, and Cisco Groups in Archer and Young Counties on the Eastern Shelf of the Midland basin (northwest and downdip from the outcrop) yielded mean random vitrinite reflectance (Ro) values between about 0.4 and 0.8%. This range of Ro values indicates rank from subbituminous C to high volatile A bituminous in the shallow subsurface, which may be sufficient for early thermogenic gas generation. Near-surface (< 100 m; 300 ft) core and outcrop samples of coal from areas of historical underground coal mining in the region yielded similar Ro values of 0.5 to 0.8%. Carbonaceous shale core samples of Lower Pennsylvanian strata (lower Atoka Group) from two deeper wells (samples from ~ 1650 m; 5400 ft) in Jack and western Wise Counties in the western part of the Fort Worth basin yielded higher Ro values of about 1.0%. Pyrolysis and petrographic data for the lower Atoka samples indicate mixed Type II/Type III organic matter, suggesting generated hydrocarbons may be both gas- and oil-prone. In all other samples, organic material is dominated by Type III organic matter (vitrinite), indicating that generated hydrocarbons should be gas-prone. Individual coal beds are thin at outcrop (< 1 m; 3.3 ft), laterally discontinuous, and moderately high in ash yield and sulfur content. A possible analog for coalbed gas potential in the Pennsylvanian section of north-central Texas occurs on the northeast Oklahoma shelf and in the Cherokee basin of southeastern Kansas, where contemporaneous gas-producing coal beds are similar in thickness, quality, and rank.  相似文献   

18.
The geology, petrography and chemical variation of the Pecket coal sequence, Magellan Region (52°57′S, 71°10′W), the only Chilean coal used for electricity generation on a large scale, has been studied in order to predict their combustion behaviour, especially in coal blends. The depositional environment of formation of the coal seams was a swamp rarely exposed to subaerial conditions and was associated with the development of the folded foreland of the Magellan basin during the Tertiary (Oligo–Miocene). The general tectonic regime of the collision of the Antarctic and South American plates is reflected by a system of joints with 40°N–50°W strike. The maceral composition of all six seams studied indicates high contents of vitrinite (>90%), minor content of liptinite (4.7%) and inertinite (<2%). Occurrence of tonstein horizons altered to kaolinite indicates a distal volcanism during peat accumulation. Coal rank varies between lignite and subbituminous (Ro=0.28–0.42%) with an average dry basis calorific value of 5450 kcal/kg, 17 wt.% moisture, 41 wt.% volatile matter, and sulphur content below 0.5 wt.%. The mineral matter (LTA) associated with the coal shows a dominance of kaolinite with quartz, smectite, and minor basanite. SiO2/Al2O3 and Fe2O3/CaO ratios of the ashes diminish towards the lower seams. With respect to the utilisation of Pecket coals in combustion, base/acid ratios (B/A) and silica ratios (SR) indicate potential fouling for seams 1, 2, 5, and 6i, with high fouling indexes (Rf) for seams 2 and 5. Pecket coal is excellent for blend combustion due to its low sulphur content.  相似文献   

19.
The paralic, Lower-Middle Jurassic Bagå Formation of the Island of Bornholm, Denmark, was deposited in a fault-bounded, subsiding, pull-apart basin. The formation is up to 400 m thick and contains more than 50 coal seams. Twelve of these have been investigated petrographically and geochemically to provide basic information on the composition of the relatively unknown Jurassic coals. The peat-forming environments represented by the seams and the associated siliciclastic sediments are interpreted.The seams represent three types of environments with organic matter deposition. Peat accumulation occurred in low-lying areas situated between river channels in a coastal plain environment undergoing overall transgression. The coals have a relatively uniform, huminite-rich petrographic composition, indicating that the precursor mires were dominated by persistent, water-saturated and anoxic conditions. The swamps were probably occupied by a small-statured flora with cellulose-rich tissues. Significant bacterial activity in the peat swamps is suggested by an abundance of hopanes. Influence from marine water was not common but occurred occasionally. During peat accumulation, the depositional conditions were stable and quiet. The small thicknesses of the seams (8–57 cm thick) indicate relatively short periods of peat formation (average c. 2300 yr), due to continued base-level rise, controlled by subsidence, and an overall eustatic rise, causing repeated changes in the sedimentary regimes. The coal seams are of low rank and were buried to a depth of 1100–1200 m before uplift, due to Late Cretaceous-early Tertiary basin inversion and Neogene uplift.  相似文献   

20.
 本文运用现代沉积学的理论与方法,分析了位于华北晚古生代聚煤区中北带的阳泉,井陉煤田含煤岩系的岩相类型、沉积环境及古地理演化。提出,阳泉、井陉一带石炭纪中、晚期及早二叠世早期沉积的古地理类型均属滨海平原型,北部边缘的阴山古陆为聚煤区陆源碎屑沉积物的主要供给区,同时,五台、太行、吕梁隆起区也可提供部分陆源碎屑沉积物。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号