首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The NWA 5491 CV3 meteorite is a CVoxA subtype, and composed of two substantially different units (titled “upper” and “lower” units) in the cm size range with original accreted material and also subsequent alteration produced features. Based on the large chondrules in the “upper” unit and the small chondrules plus CAIs in the “lower” unit, they possibly accreted material from different parts of the solar nebula and/or at different times, whereas substantial changes happened in the nebula's composition. Differences are observed in the level of early fragmentation too, which was stronger in the upper units. During later alteration oxidizing fluids possibly circulated only in the upper unit, mechanical fragmentation and resorption were also stronger there. In the last phase of the geological history these two rock units came into physical contact, but impact‐driven shock effects were not observed. The characteristics of this meteorite provide evidence that the same parent body might accrete substantially different material and also the later processes could differ spatially in the parent body.  相似文献   

2.
We studied textures and compositions of sulfide inclusions in unzoned Fe,Ni metal particles within CBa Gujba, CBa Weatherford, CBb HH 237, and CBb QUE 94411 in order to constrain formation conditions and secondary thermal histories on the CB parent body. Unzoned metal particles in all four chondrites have very similar metal and sulfide compositions. Metal particles contain different types of sulfides, which we categorize as: homogeneous low‐Cr sulfides composed of troilite, troilite‐containing exsolved daubreelite lamellae, arcuate sulfides that occur along metal grain boundaries, and shock‐melted sulfides composed of a mixture of troilite and Fe, Ni metal. Our model for formation proposes that the unzoned metal particles were initially metal droplets that formed from splashing by a partially molten impacting body. Sulfide inclusions later formed as a result of precipitation of excess S from solid metal at low temperatures, either during single stage cooling or during a reheating event by impacts. Sulfides containing exsolution lamellae record temperatures of ?600 °C, and irregular Fe‐FeS intergrowth textures suggest localized shock melting, both of which are indicative of heterogeneous heating by impact processes on the CB parent body. Our study shows that CBa and CBb chondrites formed in a similar environment, and also experienced similar secondary impact processing.  相似文献   

3.
LaPaz Icefield (LAP) 02239 is a mildly aqueously altered CM2 carbonaceous chondrite that hosts a xenolith from a primitive chondritic parent body. The xenolith contains chondrules and calcium- and aluminum-rich inclusions (CAIs) in a very fine-grained matrix. The chondrules are comparable in mineralogy and oxygen isotopic composition with those in the CMs, and its CAIs are also mineralogically similar to the CM population apart for being unusually small and abundant. The presence of serpentine demonstrates that the xenolith has been aqueously altered, and its phyllosilicate-rich matrix has a comparable oxygen isotopic composition to the matrices of CM meteorites. The xenolith's chondrules lack fine-grained rims, whereas the xenolith itself has a fine-grained rim that is petrographically and chemically comparable with the rims on coarse grained objects in LAP 02239 and other CM meteorites. These properties show that the xenolith's parent body was formed from similar materials to the CM parent body(ies). Following its lithification by aqueous alteration, a piece of the xenolith's parent body was impact-ejected, acquired a fine-grained rim while free-floating in the protoplanetary disc, then was accreted along with rimmed chondrules and other materials to make the LAP 02239 parent body. Subsequent aqueous processing of the LAP 02239 parent body altered the fine-grained rims on the xenolith, chondrules, and CAIs. The xenolith shows that the timespan of geological evolution of carbonaceous chondrite parent bodies was sufficiently long for some of them to have been aqueously altered before others had formed.  相似文献   

4.
Abstract— Crystalline lunar spherules (CLS) from three thin sections of Apollo 14 regolith breccias (14318,6; 14318,48 and 14315,20) have been examined. The objects have been classified and their abundances, size distributions, bulk compositions, and (where possible) plagioclase compositions determined. By number, 64% consist predominantly of very fine-grained equant plagioclase grains but can also contain larger (～50 μm) feldspar crystals (type X), while 22% contain plagioclase lathes in a fine-grained mafic mesostasis (type Y). Plagioclase in both spherule types displays bright yellow cathodoluminescence that is conspicuous among the blue CL of the normal feldspar of the breccias. Type Z spherules (5%) contain feldspar with blue CL and minor amounts of olivine and pyroxene. Type Q spherules (4%) contain feldspar with yellow CL but in a luminescent mesostasis (of quartz or feldspar?). A few spherules are mixtures of type Y and type X textures. Most type X spherules, and a few type Y spherules, have fine-grained opaque rims. Compound objects were also found and consist of two or more CLS that appear to have collided while still plastic or molten. The CLS are thought to be impact spherules that crystallized in free flight, their coarse textures suggesting fairly slow cooling rates (～ <1 °C/s). The abundance of the CLS resembles that of chondrules in the CM chondrite Murchison, and their cumulative size-frequency distributions are very similar to those of the chondrules in several meteorite classes. The bulk compositions of the CLS do not resemble regoliths at any of the Apollo sites, including Apollo 14, or any of the common impact glasses, but they do resemble the bulk compositions of several lunar meteorites and the impact glasses they contain. The Apollo 14 site is located on a region containing Imbrium ejecta, and we suggest that the CLS derive from the Imbrium impact. Ballistic calculations indicate that only impact events of this size on the Moon are capable of producing melt spherules with the required free flight times and slow cooling rates. Smaller impacts produce glassy spherules and agglutinates. As has been pointed out many times, the CLS have many properties in common with meteoritic chondrules. While much remains unclear, difficulties with a nebular origin and new developments in chondrule chronology, studies of asteroid surfaces and impact ejecta behavior, and the present observations indicate that meteoritic chondrules could have formed by impact.  相似文献   

5.
Lithic fragments in LL-group chondrites commonly have poikilitic textures, in part or in whole, where mainly olivine is enclosed by orthopyroxene. Partially poikilitic fragments also have grano-blastic areas and anhedral olivine larger than the olivine enclosed by pyroxene. In analogy to lunar poikilitic rocks and lithic fragments, poikilitic lithic fragments in LL-group chondrites, i.e., meteorites which are highly brecciated due to repeated impacts, are also interpreted as being related to impact events on meteorite parent bodies where melting and reheating of protolith occurred. Compositional characteristics of minerals in certain fragments, such as highly-unequilibrated clinopyroxene (CaO, 14.5 to 17.3 wt %; Al2O3, 6.7%) and relatively high CaO (0.70 to 2.5 wt %) in orthopyroxene in a Ngawi fragment, seem to indicate a melt origin. However, as in the lunar case, it is difficult to decide whether the meteoritic poikilitic textures resulted from complete or partial melting or largely by solid-state recrystallization, although the large olivines that may be relict crystals appear to indicate that at least partial melting was involved. In all probability, all three processes are responsible for the poikilitic textures in chondrites, since temperature regimes produced by impact processes are likely to range widely. These interpretations may also apply to the poikilitic-textured Shaw chondrite, L-group, which may owe its poikilitic texture to impact partial-melting processes while in the parent body regolith.  相似文献   

6.
Abstract– We document the petrographic setting and textures of Fe,Ni metal, the mineralogy of metallic assemblages, and the modal mineral abundances in the EL3 meteorites Asuka (A‐) 881314, A‐882067, Allan Hills 85119, Elephant Moraine (EET) 90299/EET 90992, LaPaz Icefield 03930, MacAlpine Hills (MAC) 02635, MAC 02837/MAC 02839, MAC 88136, Northwest Africa (NWA) 3132, Pecora Escarpment 91020, Queen Alexandra Range (QUE) 93351/QUE 94321, QUE 94594, and higher petrologic type ELs Dar al Gani 1031 (EL4), Sayh al Uhaymir 188 (EL4), MAC 02747 (EL4), QUE 94368 (EL4), and NWA 1222 (EL5). Large metal assemblages (often containing schreibersite and graphite) only occur outside chondrules and are usually intergrown with silicate minerals (euhedral to subhedral enstatite, silica, and feldspar). Sulfides (troilite, daubréelite, and keilite) are also sometimes intergrown with silicates. Numerous authors have shown that metal in enstatite chondrites that are interpreted to have been impact melted contains euhedral crystals of enstatite. We argue that the metal/sulfide–silicate intergrowths in the ELs we studied were also formed during impact melting and that metal in EL3s thus does not retain primitive (i.e., nebular) textures. Likewise, the EL4s are also impact‐melt breccias. Modal abundances of metal in the EL3s and EL4s range from approximately 7 to 30 wt%. These abundances overlap or exceed those of EL6s, and this is consistent either with pre‐existing heterogeneity in the parent body or with redistribution of metal during impact processes.  相似文献   

7.
The Tenoumer impact structure is a small, well‐preserved crater within Archean to Paleoproterozoic amphibolite, gneiss, and granite of the Reguibat Shield, north‐central Mauritania. The structure is surrounded by a thin ejecta blanket of crystalline blocks (granitic gneiss, granite, and amphibolite) and impact‐melt rocks. Evidence of shock metamorphism of quartz, most notably planar deformation features (PDFs), occurs exclusively in granitic clasts entrained within small bodies of polymict, glass‐rich breccia. Impact‐related deformation features in oligoclase and microcline grains, on the other hand, occur both within clasts in melt‐breccia deposits, where they co‐occur with quartz PDFs, and also within melt‐free crystalline ejecta, in the absence of co‐occurring quartz PDFs. Feldspar deformation features include multiple orientations of PDFs, enhanced optical relief of grain components, selective disordering of alternate twins, inclined lamellae within alternate twins, and combinations of these individual textures. The distribution of shock features in quartz and feldspar suggests that deformation textures within feldspar can record a wide range of average pressures, starting below that required for shock deformation of quartz. We suggest that experimental analysis of feldspar behavior, combined with detailed mapping of shock metamorphism of feldspar in natural systems, may provide critical data to constrain energy dissipation within impact regimes that experienced low average shock pressures.  相似文献   

8.
We studied three lithologies (light and dark chondritic and impact melt rock) differing in shock stage from the LL5 chondrite Chelyabinsk. Using the 40Ar-39Ar dating technique, we identified low- and high-temperature reservoirs within all samples, ascribed to K-bearing oligoclase feldspar and shock-induced jadeite–feldspar glass assemblages in melt veins, respectively. Trapped argon components had variable 40Ar/36Ar ratios even within low- and high-temperature reservoirs of individual samples. Correcting for trapped argon revealed a lithology-specific response of the K-Ar system to shock metamorphism, thereby defining two distinct impact events affecting the Chelyabinsk parent asteroid (1) an intense impact event ~1.7 ± 0.1 Ga ago formed the light–dark-structured and impact-veined Chelyabinsk breccia. Such a one-stage breccia formation is consistent with petrological observations and was recorded by the strongly shocked lithologies (dark and impact melt) where a significant fraction of oligoclase feldspar was transformed into jadeite and feldspathic glass; and (2) a young reset event ~30 Ma ago particularly affected the light lithology due to its low argon retentivity, while the more retentive shock-induced phases were more resistant against thermal reset. Trapped argon with 40Ar/36Ar ratios up to 1900 was likely incorporated during impact-induced events on the parent body, and mixed with terrestrial atmospheric argon contamination. Had it not been identified via isochrons based on high-resolution argon extraction, several geochronologically meaningless ages would have been deduced.  相似文献   

9.
We examined H4 chondrites Beaver Creek, Forest Vale, Quenggouk, Ste. Marguerite, and Sena with the electron backscatter diffraction (EBSD) techniques of Ruzicka and Hugo (2018) to determine if there is evidence for shock metamorphism consistent with the previously inferred histories of their early impact excavation or lack thereof. We find that all samples have EBSD data consistent with a history of synmetamorphic impact shock (i.e., shock during thermal metamorphism), followed by postshock annealing. Petrographic analysis of Sena, Quenggouk, and Ste. Marguerite found exsolved Cu and irregular troilite within Fe metal, features consistent with shock metamorphism. All samples have a spatial variability in grain deformation consistent with shock processes, though Forest Vale, Quenggouk, and Ste. Marguerite may have relict signatures of accretional deformation as indicated by variability in their olivine deformation metrics. Within the context of previous workers' geochemical observations, a more complex history is inferred for each sample. The “slow-cooled” samples, Quenggouk and Sena, were subject to synmetamorphic shock without excavation and annealed at depth. The same is true of the “fast-cooled” samples, Beaver Creek, Forest Vale, and Ste. Marguerite. However, after annealing, these rocks were excavated by a secondary impact or impacts around 5.2–6.5 Ma post-CAI formation and were left to cool rapidly on the surface of the H chondrite parent body. These interpreted histories are best compatible with a model of an impact-battered but intact onion shell for the earliest history of the H parent body. However, the EBSD evidence does not preclude a parent body disruption after 7 Ma post-CAI formation.  相似文献   

10.
We detail the production of metallic spherules in laboratory oblique shock impact experiments, and their applicability (1) to textures in a partly shock‐melted chondritic meteorite and (2) to the occurrence of palaeomagnetically important fine iron or iron alloy particles in the lunar regolith. Samples recovered from 29–44 GPa, 800 ns, experiments revealed melting and textures reminiscent of metallic spherules in the Yanzhuang H‐chondrite, including “dumbbell” forms and other more complex morphologies. Our experiments demonstrate that metallic spherules can be produced via oblique impact sliding at lower velocities (1.85 km s?1) than are generally assumed in previous work associated with bulk‐shock melting, and that oblique impact sliding is a viable mechanism for producing spherules in shock‐induced veins in moderately shocked meteorites. Significantly, our experiments also produced fine metallic (iron alloy) spherules within the theoretical narrow size range (a few tens of nanometers for slightly ellipsoidal particles) for stable single‐domain (SSD) particles, which are the most important palaeomagnetically, since they can record lunar and planetary magnetic fields over geological time periods. The experiments also produced spherules consistent with superparamagnetic (SP) and multidomain (MD) particle sizes. The fine SSD and SP particles on the lunar surface are currently thought to have been formed predominantly by space weathering processes. Our experiments suggest that oblique shock impact sliding may be a further means of producing the SSD and SP iron or iron alloy particles observed in the lunar regolith, and which are likely to occur in the regoliths of Mercury and other planetary bodies.  相似文献   

11.
Abstract— The newly discovered Dhala structure, Madhya Pradesh State, India, is the eroded remnant of an impact structure with an estimated present‐day apparent diameter of about 11 km. It is located in the northwestern part of the Archean Bundelkhand craton. The pre‐impact country rocks are predominantly granitoids of ?2.5 Ga age, with minor 2.0–2.15 Ga mafic intrusive rocks, and they are overlain by post‐impact sediments of the presumably >1.7 Ga Vindhyan Supergroup. Thus, the age for this impact event is currently bracketed by these two sequences. The Dhala structure is asymmetrically disposed with respect to a central elevated area (CEA) of Vindhyan sediments. The CEA is surrounded by two prominent morphological rings comprising pre‐Vindhyan arenaceous‐argillaceous and partially rudaceous metasediments and monomict granitoid breccia, respectively. There are also scattered outcrops of impact melt breccia exposed towards the inner edge of the monomict breccia zone, occurring over a nearly 6 km long trend and with a maximum outcrop width of ?170 m. Many lithic and mineral clasts within the melt breccia exhibit diagnostic shock metamorphic features, including multiple sets of planar deformation features (PDFs) in quartz and feldspar, ballen‐textured quartz, occurrences of coesite, and feldspar with checkerboard texture. In addition, various thermal alteration textures have been found in clasts of initially superheated impact melt. The impact melt breccia also contains numerous fragments composed of partially devitrified impact melt that is mixed with unshocked as well as shock deformed quartz and feldspar clasts. The chemical compositions of the impact melt rock and the regionally occurring granitoids are similar. The Ir contents of various impact melt breccia samples are close to the detection limit (1–1.5 ppb) and do not provide evidence for the presence of a meteoritic component in the melt breccia. The presence of diagnostic shock features in mineral and lithic clasts in impact melt breccia confirm Dhala as an impact structure. At 11 km, Dhala is the largest impact structure currently known in the region between the Mediterranean and southeast Asia.  相似文献   

12.
Abstract— A large number of ordinary chondrites contains micron-sized particles of metal and/or troilite dispersed in their silicate grains. Such metallic phases are responsible for the so-called darkening of the silicate grains and might be either precipitates, which formed during reduction of the silicates, or inclusions injected as a melt during a shock event. We have investigated these tiny foreign phases by analytical transmission electron microscopy in three unweathered, metamorphosed ordinary chondrites (Saint Séverin, LL6, Tsarev, L6 and Kernouvé, H6). We also looked for remnant shock indices. Our TEM observations suggest the following sequence of events in the three meteorites. First, a number of relatively strong shock events occurred on the parent body/bodies producing an Fe-FeS melt that was injected into silicate grains along a dense network of open fractures. Most of these shock defects were subsequently erased by high-temperature (700–900 °C) thermal metamorphism. Some remnants of the shock events are the observed trails of tiny metal and/or sulfide inclusions that formed as a result of fracture healing. Chemical homogenization of the silicates and limited oxidation of the metallic blebs also occurred during this high-temperature annealing event, resulting in Ni-rich inclusions. This effect was especially pronounced in the L and LL-chondrites studied. During subsequent cooling of the body/bodies, inclusions of chromite and phosphate precipitated, nucleating preferentially on lattice defects (dislocations, subgrain boundaries) and on the metal and sulfide inclusions. A later shock event of moderate intensity, probably corresponding to the separation of the meteorite from its parent body, produced new shock features in the silicate grains of the Saint Séverin meteorite, including mechanical twins in diopside and straight free screw dislocations in olivine.  相似文献   

13.
Abstract— Piplia Kalan is an equilibrated eucrite consisting of 60–80 vol% lithic clasts in a subordinate brecciated matrix. Ophitic/subophitic clasts fall into two groups: finer‐grained lithology A and coarser‐grained lithology B. Very fine‐grained clasts with equigranular textures (lithology C) also occur and originally were hypocrystalline in texture. The variety of materials represented in Piplia Kalan suggests cooling histories ranging from quenching to slower crystallization. Despite textural differences, clasts and matrix have similar mineral and bulk compositions. Thus, Piplia Kalan is probably best classified as a genomict breccia that could represent fragments of a single lava flow or shallow intrusive body, including fine‐grained or glassy outer margin and more slowly cooled coarser‐grained interior. Bulk composition suggests that the meteorite is most closely related to the main group eucrites, but it probably was affected by minor amounts of fractional crystallization. Piplia Kalan displays evidence of an early shock event, including brecciated matrix and areas of lithic clasts that contain very fine‐grained, granular pyroxene between deformed feldspar laths. The meteorite also displays evidence of at least one episode of extensive thermal metamorphism: hypocrystalline materials are recrystallized to hornfelsic textures and minerals throughout the meteorite contain abundant inclusions that are relatively large in size. Veins of brown glass transect both clasts and matrix and indicate a second, postmetamorphism shock event.  相似文献   

14.
The parent body of the Farmington meteorite experienced sufficient heating, probably from shock accompanying a major collision occurring at 520 × 106 years ago, to erase the record of any magnetization acquired prior to that event. Therefore, the observed magnetization in the Farmington meteorite must have been acquired after the collision. Shock-produced magnetization is unlikely because of the finite cooling time indicated by the burial depth of ≥ several meters. The possibility of shock or irradiation-produced magnetizations should be studied experimentally, even though neither appears likely to have produced the magnetic field which produced the magnetization in the parent body of the Farmington meteorite.  相似文献   

15.
Remotely sensed observations from recent missions (e.g., GRAIL, Kaguya, Chandrayaan‐1) have been interpreted as indicating that the deep crust and upper mantle are close to or at the lunar surface in many large impact basins (e.g., Crisium, Apollo, Moscoviense). If this is correct, the capability of either impact or volcanic processes to transport mantle lithologies to the lunar surface should be enhanced in these regions. Somewhat problematic to these observations and interpretations is that examples of mantle lithologies in the lunar sample collection (Apollo Program, Luna Program, lunar meteorites) are at best ambiguous. Dunite xenoliths in high‐Ti mare basalt 74275 are one of these ambiguous examples. In this high‐Ti mare basalt, olivine occurs in three generations: olivine associated with dunite xenoliths, olivine megacrysts, and olivine microphenocrysts. The dunite xenoliths are anhedral in shape and are generally greater than 800 μm in diameter. The interior of the xenoliths are fairly homogeneous with regard to many divalent cations. For example, the Mg# (Mg/Mg + Fe × 100) ranges from 82 to 83 in their interiors and decreases from 82 to 68 over the 10–30 μm wide outer rim. Titanium and phosphorus X‐ray maps of the xenolith illustrate that these slow diffusing elements preserve primary cumulate zoning textures. These textures indicate that the xenoliths consist of many individual olivine grains approximately 150–200 μm in diameter with low Ti, Al, and P cores. These highly incompatible elements are enriched in the outer Fe‐rich rims of the xenoliths and slightly enriched in the rims of the individual olivine grains. Highly compatible elements in olivine such as Ni exhibit a decrease in the rim surrounding the xenolith, an increase in the incompatible element depleted cores of the individual olivine grains, and a slight decrease in the “interior rims” of the individual olivine grains. Inferred melt composition, liquid lines of descent, and zoning profiles enable the reconstruction of the petrogenesis of the dunite xenoliths. Preservation of primary magmatic zoning (Ti, P, Al) and lack of textures similar to high‐pressure mineral assemblages exhibited by the Mg‐suite (Shearer et al. 2015) indicate that these xenoliths do not represent deep crustal or shallow mantle lithologies. Further, they are chemically and mineralogically distinct from Mg‐suite dunites identified from the Apollo 17 site. More likely, they represent olivine cumulates that crystallized from a low‐Ti mare basalt at intermediate to shallow crustal levels. The parent basalt to the dunite xenolith lithology was more primitive than low‐Ti basalts thus far returned from the Moon. Furthermore, this parental magma and its more evolved daughter magmas are not represented in the basalt sample suite returned from the Taurus‐Littrow Valley by the Apollo 17 mission. The dunite xenolith records several episodes of crystallization and re‐equilibration. During the last episode of re‐equilibration, the dunite cumulate was sampled by the 74275 high‐Ti basalt and transported over a period of 30–70 days to the lunar surface.  相似文献   

16.
Abstract— Galim is a polymict breccia consisting of a heavily shocked (shock stage S6) LL6 chondrite, Galim (a), and an impact-melted EH chondrite, Galim (b). Relict chondrules in Galim (b) served as nucleation sites for euhedral enstatite grains crystallizing from the impact melt. Many of the reduced phases typical of EH chondrites (e.g., Si-bearing metallic Fe-Ni; Ti-bearing troilite) are absent. Galim (b) was probably shock-melted while in contact with a more oxidized source, namely, Galim (a); during this event, Si was oxidized from the metal and Ti was oxidized from troilite. Galim (a) contains shock veins and recrystallized, unzoned olivine. The absence of evidence for reduction in Galim (a) may indicate that the amount of LL material greatly exceeded that of EH material; shock metamorphism may have taken place on the LL parent body. Shock-induced redox reactions such as those inferred for the Galim breccia appear to be restricted mainly to asteroids because the low-end tail of their relative-velocity distribution permits mixing of intact disparate materials (including accretion of projectiles of different oxidation states), whereas the peak of the distribution leads to high equilibration shock pressures (allowing impact-induced exchange between previously accreted, disequilibrated materials). Galim probably formed by a two-stage process: (1) accretion to the LL parent body of an intact EH projectile at low relative velocities, and (2) shock metamorphism of the assemblage by the subsequent impact of another projectile at significantly higher relative velocities.  相似文献   

17.
Microtextural study of a single troilite‐metal nodule (TMN) from the Katol L6‐7 chondrite, a recent fall (May, 2012) in India suggests that the TMN is primarily an aggregate of submicron‐scale intergrowth of troilite and kamacite (mean Ni: 6.18 wt%) juxtaposed with intensely fractured silicates, mainly olivine (Fa: 25 mole%), low‐Ca pyroxene (Fs: 21.2 mole%), and a large volume of maskelynite. Evidence of shock textures in the TMN indicates a high degree of shock metamorphism that involves plagioclase‐maskelynite and olivine‐wadsleyite/ringwoodite transformations and formation of quenched metal‐sulfide melt textures due to localized shear‐induced frictional melting. It is inferred that the TMN formation is an independent, localized event by a high energy impact and its subsequent incorporation in the ejected chondritic fragment of the parent body. Katol chondrite has been calibrated with a peak shock pressure of S5 (~45 GPa) after Stöffler et al. (1991), whereas peak shock pressure within the TMN exceeds the shock facies S6 (>45 GPa) following Bennett and McSween (1996) and Stöffler et al. (1991). Overall, the shock‐thermal history of the Katol TMN is dissimilar as compared to the host chondrite.  相似文献   

18.
Saint‐Séverin and Elbert, two LL6 chondrite breccias, were systematically studied to evaluate multiple deformation effects on spatial scales ranging from thin section (mesoscale) to micron‐submicron (microscale) using optical microscopy, electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM). The different techniques provide consistent results but have complementary strengths, together providing a powerful approach to unravel even complex impact histories. Both meteorites have an S4 conventional shock stage, but interclast areas are more deformed, and clasts are more deformed in Elbert than in Saint‐Séverin. TEM and EBSD data provide compelling evidence that Saint‐Séverin experienced significant shock deformation while already hot, and cooled rapidly afterward, as a result of a major, possibly disruptive impact on the LL chondrite parent body ~4.4 Ga ago. In contrast, Elbert was shocked from a cold initial state but was heated significantly during shock, and cooled in a localized hot impact deposit on the LL asteroid. Both meteorites probably were shocked at least twice; data for Saint‐Séverin are best reconciled with a three‐impact model.  相似文献   

19.
Abstract— Bencubbin is an unclassified meteorite breccia which consists mainly of host silicate (～40 vol.%) and host metal (～60%) components. Rare (< 1%) ordinary chondrite clasts and a dark xenolith (formerly called a carbonaceous chondrite clast) are also found. A petrologic study of the host silicates shows that they have textures, modes, mineralogy and bulk compositions that are essentially the same as that of barred olivine (BO) chondrules, and they are considered to be BO chondritic material. Bulk compositions of individual host silicate clasts are identical and differ only in their textures which are a continuum from coarsely barred, to finely barred, to feathery microcrystalline; these result from differing cooling rates. The host silicates differ from average BO chondrules only in being angular clasts rather than fluid droplet-shaped objects, and in being larger in size (up to 1 cm) than most chondrules; but large angular to droplet-shaped chondrules occur in many chondrites. Bencubbin host metallic FeNi clasts have a positive Ni-Co trend, which coincides with that of a calculated equilibrium nebular condensation path. This appears to indicate a chondritic, rather than impact, origin for this component as well. The rare ordinary chondrite clast and dark xenolith also contain FeNi metal with compositions similar to that of the host metal. Two scenarios are offered for the origin of the Bencubbin breccia. One is that the Bencubbin components are chondritic and were produced in the solar nebula. Later brecciation, reaggregation and minor melting of the chondritic material resulted in it becoming a monomict chondritic breccia. The alternative scenario is that the Bencubbin components formed as a result of major impact melting on a chondritic parent body; the silicate fragments were formed from an impact-induced lava flow and are analogous to the spinifex-textured rocks characteristic of terrestrial komatiites. Both scenarios have difficulties, but the petrologic, chemical and isotopic data are more consistent with Bencubbin being a brecciated chondrite. Bencubbin has a number of important chemical and isotopic characteristics in common with the major components in the CR (Renazzo-type) chondrites and the unique ALH85085 chondrite, which suggests that their major components may be related. These include: (1) Mafic silicates that are similarly Mg-rich and formed in similar reducing environments. (2) Similarly low volatiles; TiO2, Al2O3 and Cr2O3 contents are also similar. (3) Similar metallic FeNi compositions that sharply differ from those in other chondrites. (4) Remarkable enrichments in 15N. (5) Similar oxygen isotopic compositions that lie on the same mixing line. Thus, the major components of the Bencubbin breccia are highly similar to those of the ALH85085 and CR chondrites and they may have all formed in the same isotopic reservoir, under similar conditions, in the CR region of the solar nebula.  相似文献   

20.
Three‐dimensional X‐ray tomographic reconstructions and petrologic studies reveal voluminous accumulations of metal in Pu?tusk H chondrite. At the contact of these accumulations, the chondritic rock is enriched in troilite. The rock contains plagioclase‐rich bands, with textures suggesting crystallization from melt. Unusually large phosphates are associated with the plagioclase and consist of assemblages of merrillite, and fluorapatite and chlorapatite. The metal accumulations were formed by impact melting, rapid segregation of metal‐sulfide melt and the incorporation of this melt into the fractured crater basement. The impact most likely occurred in the early evolution of the H chondrite parent body, when post‐impact heat overlapped with radiogenic heat. This enabled slow cooling and separation of the metallic melt into metal‐rich and sulfide‐rich fractions. This led to recrystallization of chondritic rock in contact with the metal accumulations and the crystallization of shock melts. Phosphorus was liberated from the metal and subsumed by the silicate shock melt, owing to oxidative conditions upon slow cooling. The melt was also a host for volatiles. Upon further cooling, phosphorus reacted with silicates leading to the formation of merrillite, while volatiles partitioned into the residual halogen‐rich, dry fluid. In the late stages, the fluid altered merrillite to patchy Cl/F‐apatite. The above sequence of alterations demonstrates that impact during the early evolution of chondritic parent bodies might have contributed to local metal segregation and silicate melting. In addition, postshock conditions supported secondary processes: compositional/textural equilibration, redistribution of volatiles, and fluid alterations.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号