首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
GNSS observations provided by the global tracking network of the International GNSS Service (IGS, Dow et al. in J Geod 83(3):191–198, 2009) play an important role in the realization of a unique terrestrial reference frame that is accurate enough to allow a detailed monitoring of the Earth’s system. Combining these ground-based data with GPS observations tracked by high-quality dual-frequency receivers on-board low earth orbiters (LEOs) is a promising way to further improve the realization of the terrestrial reference frame and the estimation of geocenter coordinates, GPS satellite orbits and Earth rotation parameters. To assess the scope of the improvement on the geocenter coordinates, we processed a network of 53 globally distributed and stable IGS stations together with four LEOs (GRACE-A, GRACE-B, OSTM/Jason-2 and GOCE) over a time interval of 3 years (2010–2012). To ensure fully consistent solutions, the zero-difference phase observations of the ground stations and LEOs were processed in a common least-squares adjustment, estimating all the relevant parameters such as GPS and LEO orbits, station coordinates, Earth rotation parameters and geocenter motion. We present the significant impact of the individual LEO and a combination of all four LEOs on the geocenter coordinates. The formal errors are reduced by around 20% due to the inclusion of one LEO into the ground-only solution, while in a solution with four LEOs LEO-specific characteristics are significantly reduced. We compare the derived geocenter coordinates w.r.t. LAGEOS results and external solutions based on GPS and SLR data. We found good agreement in the amplitudes of all components; however, the phases in x- and z-direction do not agree well.  相似文献   

2.
CNES (Centre National d’Etudes Spatiales) and CLS (Collecte Localisation Satellites) became an International GNSS Service (IGS) Analysis Center (AC) the 20th of May 2010. Since 2009, we are using the integer ambiguity fixing at the zero-difference level strategy in our software package (GINS/Dynamo) as an alternative to classical differential approaches. This method played a key role among all the improvements in the GPS processing we made during this period. This paper provides to the users the theoretical background, the strategies and the models used to compute the products (GPS orbits and clocks, weekly station coordinate estimates and Earth orientation parameters) that are submitted weekly to the IGS. The practical realization of the two-step, ambiguity-fixing scheme (wide-lane and narrow-lane) is described in detail. The ambiguity fixing improved our orbit overlaps from 6 to 3?cm WRMS in the tangential and normal directions. Since 2008, our products have been also regularly compared to the IGS final solutions by the IGS Analysis Center Coordinator. The joint effects of ambiguity fixing and dynamical model changes (satellite solar radiation pressure and albedo force) improved the consistency with IGS orbits from 35 to 18?mm 3D-WRMS. Our innovative strategy also gives additional powerful properties to the GPS satellite phase clock solutions. Single receiver (zero-difference) ambiguity resolution becomes possible. An overview of the applications is given.  相似文献   

3.
Accurate absolute GPS positioning through satellite clock error estimation   总被引：11，自引：0，他引：11  
 An algorithm for very accurate absolute positioning through Global Positioning System (GPS) satellite clock estimation has been developed. Using International GPS Service (IGS) precise orbits and measurements, GPS clock errors were estimated at 30-s intervals. Compared to values determined by the Jet Propulsion Laboratory, the agreement was at the level of about 0.1 ns (3 cm). The clock error estimates were then applied to an absolute positioning algorithm in both static and kinematic modes. For the static case, an IGS station was selected and the coordinates were estimated every 30 s. The estimated absolute position coordinates and the known values had a mean difference of up to 18 cm with standard deviation less than 2 cm. For the kinematic case, data obtained every second from a GPS buoy were tested and the result from the absolute positioning was compared to a differential GPS (DGPS) solution. The mean differences between the coordinates estimated by the two methods are less than 40 cm and the standard deviations are less than 25 cm. It was verified that this poorer standard deviation on 1-s position results is due to the clock error interpolation from 30-s estimates with Selective Availability (SA). After SA was turned off, higher-rate clock error estimates (such as 1 s) could be obtained by a simple interpolation with negligible corruption. Therefore, the proposed absolute positioning technique can be used to within a few centimeters' precision at any rate by estimating 30-s satellite clock errors and interpolating them. Received: 16 May 2000 / Accepted: 23 October 2000  相似文献   

4.
New IGS Station and Satellite Clock Combination   总被引：3，自引：5，他引：3  
Following the principles set forth in the Position Paper #3 at the 1998 Darmstadt Analysis Center (AC) Workshop on the new International GPS Service (IGS) International Terrestrial Reference Frame (ITRF) realization and discussions at the 1999 La Jolla AC workshop, a new clock combination program was developed. The program allows for the input of both SP3 and the new clock (RINEX) format (ftp://igsch.jpl.nasa.gov//igscb/data/format/rinex_clock.txt). The main motivation for this new development is the realization of the goals of the IGS/BIPM timing project. Besides this there is a genuine interest in station clocks and a need for a higher sampling rate of the IGS clocks (currently limited to 15 min due to the SP3 format). The inclusion of station clocks should also allow for a better alignment of the individual AC solutions and should enable the realization of a stable GPS time-scale. For each input AC clock solution the new clock combination solves and corrects for reference clock errors/instabilities as well as satellite/station biases, geocenter and station/satellite orbit errors. External station clock calibrations and/or constraints, such as those resulting from the IGS/BIPM timing pilot project, can be introduced via a subset of the fiducial timing station set, to facilitate a precise and consistent IGS UTC realization for both station and satellite combined clock solutions. Furthermore, the new clock combination process enforces strict strict conformity and consistency with the current and future IGS standards. The new clock combination maintains orbit/clock consistency at millimeter level, which is comparable to the best AC orbit/clock solutions. This is demonstrated by static GIPSY precise point positioning tests using GPS week 0995 data for stations in both Northern and Southern Hemispheres and similar tests with the Bernese software using more recent data from GPS week 1081. ? 2001 John Wiley & Sons, Inc.  相似文献   

5.
 Since the beginning of the International Global Navigation Satellite System (GLONASS) Experiment, IGEX, in October 1998, the Center for Orbit Determination in Europe (CODE) has acted as an analysis center providing precise GLONASS orbits on a regular basis. In CODE's IGEX routine analysis the Global Positioning System (GPS) orbits and Earth rotation parameters are introduced as known quantities into the GLONASS processing. A new approach is studied, where data from the IGEX network are combined with GPS observations from the International GPS Service (IGS) network and all parameters (GPS and GLONASS orbits, Earth rotation parameters, and site coordinates) are estimated in one processing step. The influence of different solar radiation pressure parameterizations on the GLONASS orbits is studied using different parameter subsets of the extended CODE orbit model. Parameterization with three constant terms in the three orthogonal directions, D, Y, and X (D = direction satellite–Sun, Y = direction of the satellite's solar panel axis), and two periodic terms in the X-direction, proves to be adequate for GLONASS satellites. As a result of the processing it is found that the solar radiation pressure effect for the GLONASS satellites is significantly different in the Y-direction from that for the GPS satellites, and an extensive analysis is carried out to investigate the effect in detail. SLR observations from the ILRS network are used as an independent check on the quality of the GLONASS orbital solutions. Both processing aspects, combining the two networks and changing the orbit parameterization, significantly improve the quality of the determined GLONASS orbits compared to the orbits stemming from CODE's IGEX routine processing. Received: 10 May 2000 / Accepted: 9 October 2000  相似文献   

6.
Since 21 June 1992 the International GPS Service (IGS), renamed International GNSS Service in 2005, produces and makes available uninterrupted time series of its products, in particular GPS observations from the IGS Global Network, GPS orbits, Earth orientation parameters (components x and y of polar motion, length of day) with daily time resolution, satellite and receiver clock information for each day with different latencies and accuracies, and station coordinates and velocities in weekly batches for further analysis by the IERS (International Earth Rotation and Reference Systems Service). At a later stage the IGS started exploiting its network for atmosphere monitoring, in particular for ionosphere mapping, for troposphere monitoring, and time and frequency transfer. This is why new IGS products encompass ionosphere maps and tropospheric zenith delays. This development became even more important when more and more space-missions carrying space-borne GPS for various purposes were launched. This article offers an overview for the broader scientific community of the development of the IGS and of the spectrum of topics addressed today with IGS data and products.  相似文献   

7.
A New Solar Radiation Pressure Model for GPS Satellites   总被引：11，自引：3，他引：8  
The largest error in currently used GPS orbit models is due to the effect of solar radiation pressure. Over the last few years many improvements were made in modeling the orbits of GPS satellites within the International GPS Service (IGS). Howeer, most improvements were achieved by increasing the number of estimated orbit and/or solar radiation pressure parameters. This increase in the number of estimated satellite parameters weakens the solutions of all estimated parameters (not only orbit parameters). Because of correlations the additional orbit parameters may introduce biases in other estimated quantities, for example the length of day. We present a recently developed solar radiation pressure model for the GPS satellites. This model is based on experiences and results gained at the Center for Orbit Determination in Europe (CODE) in the context of its IGS activities since June 1992. The performance of the new model is almost an order of magnitude better than that of the existing ROCK models. It also allows a reduction of the number of orbit parameters that have to be estimated. ? 1999 John Wiley & Sons, Inc.  相似文献   

8.
IGS Near Real-Time Products and Their Applications   总被引：2，自引：2，他引：2  
The primary IGS products, including precise GPS orbits, Earth orientation parameters, and estimated and predicted GPS satellite clocks, are no longer used exclusively for essential geodetic support of scientic research. They are increasingly being used by a wide range of non-academic applications. In these applications, timeliness is extremely critical. To address the timeliness issue, the strengths and weaknesses of current IGS production processes are discussed, new ways to improve the timeliness and quality are explored, and recommendations are proposed to fulfill the application requirements. ? 2001 John Wiley & Sons, Inc.  相似文献   

9.
Apropos laser tracking to GPS satellites   总被引：3，自引：0，他引：3  
. Laser tracking to GPS satellites (PRN5 and 6) provides an opportunity to compare GPS and laser systems directly and to combine data of both in a single solution. A few examples of this are given in this study. The most important results of the analysis are that (1) daily SLR station coordinate solutions could be generated with a few cm accuracy; (2) coordinates of nine stations were determined in a 2.3-year-long arc solution; (3) the contribution of laser data on the `SLR-GPS' combined orbit, resulting from the simultaneous processing of SLR and GPS data, is significant and (4) laser-only orbits have an accuracy of 10–20 cm, 1-day predictions of SLR orbits differ from IGS orbits by about 20–40 cm, 2-day predictions by 50–60 cm. Received: 1 October 1996 / Accepted: 14 February 1997  相似文献   

10.
NOAA’s National Geodetic Survey (NGS) has been one of the Analysis Centers (ACs) of the International GNSS Service (IGS) since its inception in 1994. Solutions for daily GPS orbits and Earth orientation parameters are regularly contributed to the IGS Rapid and Final products, as well as solutions of weekly station positions. These solutions are combined with those of the other ACs and then the resultant IGS products are distributed to users. To perform these tasks, NGS has developed and refined the Program for the Adjustment of GPS EphemerideS (PAGES) software. Although PAGES has continuously evolved over the past 15 years, recent efforts have focused mostly on updating models and procedures to conform more closely to IGS and the International Earth Rotation Service (IERS) conventions. Details of our processing updates and demonstrations of the improvements will be provided.  相似文献   

11.
Significant differences in time series of geodynamic parameters determined with different Global Navigation Satellite Systems (GNSS) exist and are only partially explained. We study whether the different number of orbital planes within a particular GNSS contributes to the observed differences by analyzing time series of geocenter coordinates (GCCs) and pole coordinates estimated from several real and virtual GNSS constellations: GPS, GLONASS, a combined GPS/GLONASS constellation, and two virtual GPS sub-systems, which are obtained by splitting up the original GPS constellation into two groups of three orbital planes each. The computed constellation-specific GCCs and pole coordinates are analyzed for systematic differences, and their spectral behavior and formal errors are inspected. We show that the number of orbital planes barely influences the geocenter estimates. GLONASS’ larger inclination and formal errors of the orbits seem to be the main reason for the initially observed differences. A smaller number of orbital planes may lead, however, to degradations in the estimates of the pole coordinates. A clear signal at three cycles per year is visible in the spectra of the differences between our estimates of the pole coordinates and the corresponding IERS 08 C04 values. Combinations of two 3-plane systems, even with similar ascending nodes, reduce this signal. The understanding of the relation between the satellite constellations and the resulting geodynamic parameters is important, because the GNSS currently under development, such as the European Galileo and the medium Earth orbit constellation of the Chinese BeiDou system, also consist of only three orbital planes.  相似文献   

12.
As any satellite geodesy technique, DORIS can monitor geocenter variations associated to mass changes within the Earth–Atmosphere–Continental hydrosphere–Oceans system. However, especially for the Z-component, corresponding to a translation of the Earth along its rotation axis, the estimated geocenter is usually affected by large systematic errors of unknown cause. By reprocessing old DORIS data, and by analyzing single satellite solutions in the frequency domain, we show that some of these errors are satellite-dependent and related to the current DORIS orbit determination strategy. In particular, a better handling of solar pressure radiation effects on SPOT-2 and TOPEX satellites is proposed which removes a large part of such artifacts. By empirically multiplying the current solar pressure model with a single coefficient (1.03 for TOPEX/Poseidon after 1993.57, and 0.96 before; and 1.08 for SPOT-2) estimated over a long time period, we can improve the measurement noise of the Z-geocenter component from 47.5 to 30.4 mm for the RMS and from 35 to 6 mm for the amplitude of the annual signal. However, the estimated SRP coefficient for SPOT-2 presents greater temporal variability, indicating that a new, dedicated solar radiation pressure model is still needed for precise geodetic applications. In addition, for the TOPEX satellite, a clear discontinuity of unknown cause is also detected on July 27, 1993.  相似文献   

13.
Quality of reprocessed GPS satellite orbits   总被引：4，自引：2，他引：2  
High-precision Global Positioning System (GPS) satellite orbits are one of the core products of the International GNSS Service (IGS). Since the establishment of the IGS in 1994, the quality and consistency of the IGS orbits has steadily been improved by advances in the modeling of GPS observations. However, due to these model improvements and reference frame changes, the time series of operational orbits are inhomogeneous and inconsistent. This problem can only be overcome by a complete reprocessing starting with the raw observation data. The quality of reprocessed GPS satellite orbits for the time period 1994–2005 will be assessed in this paper. Orbit fits show that the internal consistency of the orbits could be improved by a factor of about two in the early years. Comparisons with the operational IGS orbits show clear discontinuities whenever the reference frame was changed by the IGS. The independent validation with Satellite Laser Ranging (SLR) residuals shows an improvement of up to 30% whereas a systematic bias of 5 cm still persists.  相似文献   

14.
We show that the current levels of accuracy being achieved for the precise orbit determination (POD) of low-Earth orbiters demonstrate the need for the self-consistent treatment of tidal variations in the geocenter. Our study uses as an example the POD of the OSTM/Jason-2 satellite altimeter mission based upon Global Positioning System (GPS) tracking data. Current GPS-based POD solutions are demonstrating root-mean-square (RMS) radial orbit accuracy and precision of \({<}1\)  cm and 1 mm, respectively. Meanwhile, we show that the RMS of three-dimensional tidal geocenter variations is \({<}6\)  mm, but can be as large as 15 mm, with the largest component along the Earth’s spin axis. Our results demonstrate that GPS-based POD of Earth orbiters is best performed using GPS satellite orbit positions that are defined in a reference frame whose origin is at the center of mass of the entire Earth system, including the ocean tides. Errors in the GPS-based POD solutions for OSTM/Jason-2 of \({<}4\)  mm (3D RMS) and \({<}2\)  mm (radial RMS) are introduced when tidal geocenter variations are not treated consistently. Nevertheless, inconsistent treatment is measurable in the OSTM/Jason-2 POD solutions and manifests through degraded post-fit tracking data residuals, orbit precision, and relative orbit accuracy. For the latter metric, sea surface height crossover variance is higher by \(6~\hbox {mm}^{2}\) when tidal geocenter variations are treated inconsistently.  相似文献   

15.
Quality assessment of GPS reprocessed terrestrial reference frame   总被引：5，自引：1，他引：4  
The International GNSS Service (IGS) contributes to the construction of the International Terrestrial Reference Frame (ITRF) by submitting time series of station positions and Earth Rotation Parameters (ERP). For the first time, its submission to the ITRF2008 construction is based on a combination of entirely reprocessed GPS solutions delivered by 11 Analysis Centers (ACs). We analyze the IGS submission and four of the individual AC contributions in terms of the GNSS frame origin and scale, station position repeatability and time series seasonal variations. We show here that the GPS Terrestrial Reference Frame (TRF) origin is consistent with Satellite laser Ranging (SLR) at the centimeter level with a drift lower than 1 mm/year. Although the scale drift compared to Very Long baseline Interferometry (VLBI) and SLR mean scale is smaller than 0.4 mm/year, we think that it would be premature to use that information in the ITRF scale definition due to its strong dependence on the GPS satellite and ground antenna phase center variations. The new position time series also show a better repeatability compared to past IGS combined products and their annual variations are shown to be more consistent with loading models. The comparison of GPS station positions and velocities to those of VLBI via local ties in co-located sites demonstrates that the IGS reprocessed solution submitted to the ITRF2008 is more reliable and precise than any of the past submissions. However, we show that some of the remaining inconsistencies between GPS and VLBI positioning may be caused by uncalibrated GNSS radomes.  相似文献   

16.
The Global Positioning System (GPS) observations from the EUREF Permanent Network (EPN) are routinely analyzed by the EPN analysis centers using a tropospheric delay modeling based on standard pressure values, the Niell Mapping Functions (NMF), a cutoff angle of 3° and down-weighting of low elevation observations. We investigate the impact on EPN station heights and Zenith Total Delay (ZTD) estimates when changing to improved models recommended in the updated 2003 International Earth Rotation and Reference Systems Service (IERS) Conventions, which are the Vienna Mapping Functions 1 (VMF1) and zenith hydrostatic delays derived from numerical weather models, or the empirical Global Mapping Functions (GMF) and the empirical Global Pressure and Temperature (GPT) model. A 1-year Global Positioning System (GPS) data set of 50 regionally distributed EPN/IGS (International GNSS Service) stations is processed. The GPS analysis with cutoff elevation angles of 3, 5, and 10° revealed that changing to the new recommended models introduces biases in station heights in the northern part of Europe by 2–3 mm if the cutoff is lower than 5°. However, since large weather changes at synoptic time scales are not accounted for in the empirical models, repeatability of height and ZTD time series are improved with the use of a priori Zenith Hydrostatic Delays (ZHDs) derived from numerical weather models and VMF1. With a cutoff angle of 3°, the repeatability of station heights in the northern part of Europe is improved by 3–4 mm.  相似文献   

17.
Summary Precise orbits of the Global Positioning System (GPS) satellites are fundamental constituents of GPS-based space geodesy. Accurate baseline estimates with a precision of one to a few parts in 108 are essential to the study of Earth's dynamics problems. As a by-product of trajectory estimation, high resolution Earth Rotation Parameters (ERPs) can also be determined. A new application of triple differencing for efficient evaluation of GPS orbits in a PC environment is presented here. Initial tests show that this approach is capable of providing orbits that are highly compatible with the results obtained by the International GPS Service for Geodynamics (IGS). This approach allows for completely automated data processing without the overhead of working with very large normal matrices or cycle-slip fixing.  相似文献   

18.
Combining the orbits of the IGS Analysis Centers   总被引：1，自引：0，他引：1  
Currently seven Analysis Centers of the International GPS Service for Geodynamics (IGS) are producing daily precise orbits and the corresponding Earth Orientation Parameters (EOP). These individual products are available at several IGS Data Centers (e.g. CDDIS, IGN, SIO, etc.). During 1993 no official IGS orbits were produced, but the routine orbit comparisons by IGS indicated that, after small orientation and scale alignments, the orbit consistency was approaching the 20 cm level (a coordinate RMS), and that some orbit combination should be possible and feasible. An IGS combined orbit could provide a precise and efficient extension of the IERS Terrestrial Reference Frame (ITRF). Another advantage of such a combined orbit would be reliability and precision.Two schemes of orbit combinations are considered here: (a) the first method consists of a weighted averaging process of the earth-fixed satellite positions as produced by the individual Centers; (b) the second method uses the individual IGS orbit files as pseudo-observations in an orbit determination process, where in addition to the initial conditions, different parameter sets may be estimated. Both orbit combination methods have been tested on the January 1993 orbit data sets (GPS weeks 680 and 681) with an impressive agreement at the 5 cm level (coordinate RMS). The quality of the combined orbits is checked by processing a set of continental baselines in two different regions of the globe using different processing softwares. Both types of combined orbits gave similar baseline repeatability of a few ppb in both regions which compared favorably to the best individual orbits in the region.  相似文献   

19.
Reducing the draconitic errors in GNSS geodetic products   总被引：2，自引：2，他引：0  
Systematic errors at harmonics of the GPS draconitic year have been found in diverse GPS-derived geodetic products like the geocenter $Z$ -component, station coordinates, $Y$ -pole rate and orbits (i.e. orbit overlaps). The GPS draconitic year is the repeat period of the GPS constellation w.r.t. the Sun which is about 351 days. Different error sources have been proposed which could generate these spurious signals at the draconitic harmonics. In this study, we focus on one of these error sources, namely the radiation pressure orbit modeling deficiencies. For this purpose, three GPS+GLONASS solutions of 8 years (2004–2011) were computed which differ only in the solar radiation pressure (SRP) and satellite attitude models. The models employed in the solutions are: (1) the CODE (5-parameter) radiation pressure model widely used within the International GNSS Service community, (2) the adjustable box-wing model for SRP impacting GPS (and GLONASS) satellites, and (3) the adjustable box-wing model upgraded to use non-nominal yaw attitude, specially for satellites in eclipse seasons. When comparing the first solution with the third one we achieved the following in the GNSS geodetic products. Orbits: the draconitic errors in the orbit overlaps are reduced for the GPS satellites in all the harmonics on average 46, 38 and 57 % for the radial, along-track and cross-track components, while for GLONASS satellites they are mainly reduced in the cross-track component by 39 %. Geocenter $Z$ -component: all the odd draconitic harmonics found when the CODE model is used show a very important reduction (almost disappearing with a 92 % average reduction) with the new radiation pressure models. Earth orientation parameters: the draconitic errors are reduced for the $X$ -pole rate and especially for the $Y$ -pole rate by 24 and 50 % respectively. Station coordinates: all the draconitic harmonics (except the 2nd harmonic in the North component) are reduced in the North, East and Height components, with average reductions of 41, 39 and 35 % respectively. This shows, that part of the draconitic errors currently found in GNSS geodetic products are definitely induced by the CODE radiation pressure orbit modeling deficiencies.  相似文献   

20.
Combination of GNSS and SLR observations using satellite co-locations   总被引：6，自引：6，他引：0  
Satellite Laser Ranging (SLR) observations to Global Navigation Satellite System (GNSS) satellites may be used for several purposes. On one hand, the range measurement may be used as an independent validation for satellite orbits derived solely from GNSS microwave observations. On the other hand, both observation types may be analyzed together to generate a combined orbit. The latter procedure implies that one common set of orbit parameters is estimated from GNSS and SLR data. We performed such a combined processing of GNSS and SLR using the data of the year 2008. During this period, two GPS and four GLONASS satellites could be used as satellite co-locations. We focus on the general procedure for this type of combined processing and the impact on the terrestrial reference frame (including scale and geocenter), the GNSS satellite antenna offsets (SAO) and the SLR range biases. We show that the combination using only satellite co-locations as connection between GNSS and SLR is possible and allows the estimation of SLR station coordinates at the level of 1–2 cm. The SLR observations to GNSS satellites provide the scale allowing the estimation of GNSS SAO without relying on the scale of any a priori terrestrial reference frame. We show that the necessity to estimate SLR range biases does not prohibit the estimation of GNSS SAO. A good distribution of SLR observations allows a common estimation of the two parameter types. The estimated corrections for the GNSS SAO are 119 mm and −13 mm on average for the GPS and GLONASS satellites, respectively. The resulting SLR range biases suggest that it might be sufficient to estimate one parameter per station representing a range bias common to all GNSS satellites. The estimated biases are in the range of a few centimeters up to 5 cm. Scale differences of 0.9 ppb are seen between GNSS and SLR.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号