首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Eocene to Early Oligocene syn-rift deposits of the southern Upper Rhine Graben (URG) accumulated in restricted environments. Sedimentation was controlled by local clastic supply from the graben flanks, as well as by strong intra-basinal variations in accommodation space due to differential tectonic subsidence, that in turn led to pronounced lateral variations in depositional environment. Three large-scale cycles of intensified evaporite sedimentation were interrupted by temporary changes towards brackish or freshwater conditions. They form three major base level cycles that can be traced throughout the basin, each of them representing a stratigraphic sub-unit. A relatively constant amount of horizontal extension (ΔL) in the range of 4–5 km has been estimated for the URG from numerous cross-sections. The width of the rift (L f ), however, varies between 35 and more than 60 km, resulting in a variable crustal stretching factor between the bounding masterfaults. Apart from block tilting, tectonic subsidence was, therefore, largely controlled by changes in the initial rift width (L 0). The along-strike variations of the graben width are responsible for the development of a deep, trough-like evaporite basin (Potash Basin) in the narrowest part of the southern URG, adjacent to shallow areas in the wider parts of the rift such as the Colmar Swell in the north and the Rhine Bresse Transfer Zone that delimits the URG to the south. Under a constant amount of extension, the along-strike variation in rift width is the principal factor controlling depo-centre development in extensional basins.  相似文献   

2.
Twenty paleogeographic maps are presented for Middle Eocene (Lutetian) to Late Pliocene times according to the stratigraphical data given in the companion paper by Berger et al. this volume. Following a first lacustrine-continental sedimentation during the Middle Eocene, two and locally three Rupelian transgressive events were identified with the first corresponding with the Early Rupelian Middle Pechelbronn beds and the second and third with the Late Rupelian Serie Grise (Fischschiefer and equivalents). During the Early Rupelian (Middle Pechelbronn beds), a connection between North Sea and URG is clearly demonstrated, but a general connection between North Sea, URG and Paratethys, via the Alpine sea, is proposed, but not proved, during the late Rupelian. Whereas in the southern URG, a major hiatus spans Early Aquitanian to Pliocene times, Early and Middle Miocene marine, brackish and freshwater facies occur in the northern URG and in the Molasse Basin (OMM, OSM); however, no marine connections between these basins could be demonstrated during this time. After the deposition of the molasse series, a very complex drainage pattern developed during the Late Miocene and Pliocene, with a clear connection to the Bresse Graben during the Piacenzian (Sundgau gravels). During the Late Miocene, Pliocene and Quaternary sedimentation persisted in the northern URG with hardly any interruptions. The present drainage pattern of the Rhine river (from Alpine area to the lower Rhine Embayment) was not established before the Early Pleistocene.  相似文献   

3.
In this study, we use contrasting zircon fission track age signatures of Alpine detritus and detritus derived from the Variscan realm to trace sediment pathways in Central Europe. Our data show that the Molasse Basin was connected with the Rhine Graben Sea during the Mid-Oligocene, thus joining the North Sea to the Paratethys. Within the Rhine Graben Sea, fairly strong south–north directed currents existed, transporting sand-sized Alpine detritus nearly 300 km towards the north. A connection between the Rhône-Bresse Graben and the Rhine Graben and/or the French Molasse Basin and the Swiss Molasse Basin, by contrast, is not supported by the fission track data. This may be explained by the existence of submarine rises that hampered the transport of sand-sized sediment towards the north/northeast.  相似文献   

4.
In the northern part of the Upper Rhine Graben (URG), a high-resolution seismic reflection survey was carried out on the Rhine River over a length of 80 km, and on its tributary Neckar over a length of 25 km. The seismic investigation provides new results to redefine the base of Quaternary fluvial sediments from Oppenheim upstream to the south of Mannheim. The standard Quaternary thickness map of Bartz (1974) was partially revised and completed. Maximum Pleistocene sediment thickness is documented in the area of Mannheim with approximately 225 m. The top of the Pliocene in this area is sub-horizontal and not faulted, and rises downstream continuously towards the fault block of Worms. Intercalated lacustrine pelitic layers play a main role in defining the litho-stratigraphy in this part of the URG. In the north of Worms, Pleistocene sediments are mainly coarse-grained. In the area of Worms, a Pleistocene tectonic phase along N–S striking normal faults with variable displacement along the strike is obvious.  相似文献   

5.
International Journal of Earth Sciences - The petroleum system of the Upper Rhine Graben (URG) comprises multiple reservoir rocks and four major oil families, which are represented by four distinct...  相似文献   

6.
This study of fluvial terraces of the River Rhine and tributaries aims to search for indications of Pleistocene tectonic activity. The study area includes the northern Upper Rhine Graben (URG), the Mainz Basin and the adjacent Rhenish Massif with the Middle Rhine Valley. High rates of Quaternary surface processes, large amount of human modifications, relatively slow tectonic deformation and presently low intra-plate seismic activity characterize this area. Therefore, the records of relatively slow tectonic deformation are less well preserved and thus difficult to detect. This study uses the relative position of fluvial terraces to determine the more local effects of fault movements on the terraces and to evaluate their displacement rates and patterns. The research is based on a review of previous terrace studies and new terrace mapping from the eastern Mainz Basin and the bordering URG using topographic map interpretations and field observations. This newly mapped sequence of terrace surfaces can be correlated to other terraces in the vicinity on the basis of relative height levels. Terrace correlation between the western Mainz Basin and Middle Rhine Valley relies on a single chronostratigraphic unit (Mosbach sands) and additional relative height correlations. This is the first study to present a continuous correlation of terraces from the western margin of the URG to the Rhenish Massif and enables the study of the transition from the subsiding graben to the uplifted Rhenish Massif. By means of a longitudinal profile, which ranges from the URG to the Rhenish Massif, the influence of individual fault movements on the terrace levels and the large-scale regional uplift is demonstrated. It is evident from the profile that the uplift of Early to Middle Pleistocene terraces increases northwards, towards the Rhenish Massif. The uplift was diachronic, with a significant pulse occurring first in the northern URG (Lower Pleistocene) and later in the Rhenish Massif (Middle Pleistocene). The largest vertical displacements are recorded for the boundary fault separating the Mainz Basin and the Rhenish Massif (Hunsrück–Taunus Boundary Fault) and for faults bounding the northeastern Mainz Basin. The motions and displacement rates calculated for individual faults indicate deformation rates in the order of 0.01–0.08 mm/year. At this stage, the calculation of displacement rates depends mostly on a single dated stratigraphic unit. Additional dating of terrace deposits is urgently needed to better constrain the temporal development of the terrace sequence and the impact of tectonic movements.  相似文献   

7.
One-dimensional basin modeling of the Kyndal Graben, Bureya Basin, is conducted in three deep wells. The basin modeling technique and its basic algorithms are described. The geological and geophysical characteristics of the studied object are reported in brief, emphasizing the modeling parameters. The general and tectonic history of the subsidence, sedimentation velocities, geodynamic parameters of the extension, and thermal history of the formation and evolution of the Kyndal Graben, Bureya Basin, are calculated.  相似文献   

8.
Recently released seismic reflection data, together with previous seismic and well data, are used to describe the development of the Dannemarie basin, in the SW end of the Upper Rhine Graben. The Dannemarie Basin was formed during the main rifting phase of the Upper Rhine Graben as an asymmetrical graben trending NE–SW. Post-rift tectonism shifted the depocenter southward and changed the overall shape of the basin. Miocene Jura compression did not result in the formation of folds, as in the adjacent Mulhouse Horst. Strike slip faulting was dominant in the post-rift period and new faults were created, most notably the north trending and transpressional Belfort Fault. The boundary of the Dannemarie Basin with the Vosges Mountains is part of a restraining bend, which may account for the uplift of the southernmost part of the Vosges Mountains.  相似文献   

9.
The Upper Rhine Graben (URG) is characterized by a thickness of up to 500 m of unconsolidated Quaternary sediments, providing excellent records of the Rhine river system and its responses to tectonic and climatic changes. The most complete Quaternary sequence of fluvial and limnic-fluvial deposits is found in the Heidelberg Basin, due to its long-term subsidence since the mid-Eocene. The aim of this study is to provide a chronological framework using optically stimulated luminescence (OSL) dating of aeolian and fluvial sands derived from the upper 33 m of a sediment core, which was drilled into the Heidelberg Basin infill close to the village of Viernheim, Germany. The OSL ages demonstrate that the dated fluvial sediments were deposited during the last glacial period (Weichselian) and that there were at least three aggradation periods during this episode. The coversands that cap the sequence were emplaced during the early Holocene.  相似文献   

10.
  相似文献   

11.
依据近年来最新资料,通过对羌塘盆地南、北边界构造带构造属性、地球动力学机制及构造演化历程的讨论,剖析了羌塘盆地晚三叠世构造属性与盆地演化历程;在对盆地内部不同位置上三叠统岩性、岩相研究的基础上,通过不同古地理背景下层序界面与体系域界面的识别,建立了羌塘盆地晚三叠世层序地层格架,讨论了煤层在层序格架下的位置、聚煤特征及空间分布规律。研究表明,羌塘盆地晚三叠世为一复杂叠合盆地,经历了晚三叠世早、中期被动陆缘盆地,晚三叠世晚期羌北前陆盆地和羌南被动陆缘裂陷-坳陷盆地等不同的盆地演化历程;上三叠统构成一个完整的构造层序和两个三级层序,煤层位于高位体系域中上部,主要受控于高频率低级次海平面变化。具含煤岩系厚度大,煤层层数多,单层厚度小的特征;三角洲平原地带有利于煤层发育,三角洲沉积体系沿分割羌南、羌北盆地的中央隆起带发育,进一步指出该带是羌塘盆地内今后重要的找煤方向,并得到新发现的赛包玛煤点验证。  相似文献   

12.
《Earth》2006,74(3-4):127-196
Research on neotectonics and related seismicity has hitherto been mostly focused on active plate boundaries that are characterized by generally high levels of earthquake activity. Current seismic hazard estimates for intraplate domains are mainly based on probabilistic analyses of historical and instrumental earthquake catalogues. The accuracy of such hazard estimates is limited by the fact that available catalogues are restricted to a few hundred years, which, on geological time scales, is insignificant and not suitable for the assessment of tectonic processes controlling the observed earthquake activity. More reliable hazard prediction requires access to high quality data sets covering a geologically significant time span in order to obtain a better understanding of processes controlling on-going intraplate deformation.The Alpine Orogen and the intraplate sedimentary basins and rifts in its northern foreland are associated with a much higher level of neotectonic activity than hitherto assumed. Seismicity and stress indicator data, combined with geodetic and geomorphologic observations, demonstrate that deformation of the Northern Alpine foreland is still on-going and will continue in the future. This has major implications for the assessment of natural hazards and the environmental degradation potential of this densely populated area. We examine relationships between deeper lithospheric processes, neotectonics and surface processes in the northern Alpine Foreland, and their implications for tectonically induced topography.For the Environmental Tectonics Project (ENTEC), the Upper and Lower Rhine Graben (URG and LRG) and the Vienna Basin (VB) were selected as natural laboratories. The Vienna Basin developed during the middle Miocene as a sinistral pull-apart structure on top of the East Alpine nappe stack, whereas the Upper and Lower Rhine grabens are typical intracontinental rifts. The Upper Rhine Graben opened during its Late Eocene and Oligocene initial rifting phase by nearly orthogonal crustal extension, whereas its Neogene evolution was controlled by oblique extension. Seismic tomography suggests that during extension the mantle-lithosphere was partially decoupled from the upper crust at the level of the lower crust. However, whole lithospheric folding controlled the mid-Miocene to Pliocene uplift of the Vosges–Black Forest Arch, whereas thermal thinning of the mantle–lithosphere above a mantle plume contributed substantially to the past and present uplift of the Rhenish Massif. By contrast, oblique crustal extension, controlling the late Oligocene initial subsidence stage of the Lower Rhine Graben, gave way to orthogonal extension at the transition to the Neogene.The ENTEC Project integrated geological, geophysical, geomorphologic, geodetic and seismological data and developed dynamic models to quantify the societal impact of neotectonics in areas hosting major urban and industrial activity concentrations. The response of Europe's intraplate lithosphere to Late Neogene compressional stresses depends largely on its thermo-mechanical structure, which, in turn, controls vertical motions, topography evolution and related surface processes.  相似文献   

13.
The controls and development of early-post-rift, deep-water depositional systems are poorly understood due to their commonly deeply-buried nature. As a consequence, in the subsurface there is usually a lack of well penetrations and/or weak seismic imaging. At outcrop, early post-rift strata have commonly been deformed beyond reasonable recognition by later inversion tectonics. In contrast to these systems, the North Viking Graben shows a well-imaged Cretaceous early post-rift package with good well control and little effect from inversion. Therefore, this paper examines the early post-rift, deep-water depositional systems of the North Viking Graben to determine the controls on their stratigraphic position, geometry and evolution, and thus provide an analogue for comparable systems. Greater understanding of such systems will allow for the enhanced prediction of reservoir units in the subsurface and development of new play models since post-rift intervals are generally under-explored.The basin configuration inherited by the Cretaceous early post-rift in the northern North Sea was set up by Permo-Triassic and Late Jurassic rifting. In the North Viking Graben this established considerable along-strike variability, resulting in a northern basin segment surrounded by steep slopes and faulted-bounded structural highs and a southern basin segment margined by slopes with noticeably gentler gradients. Associated with the Cretaceous post-rift is an overall transgressional trend, which drowned local source areas, resulting in prevalent carbonate and hemipelagic mudstone deposition in the basins. In the North Viking Graben, the uplifted Oseberg fault-block provided the sub-aerial clastic source area until it was submerged in the early Upper Cretaceous.The early post-rift infill of the North Viking Graben was divided into four key seismic stratigraphic units (K1, K2, K3 and K4) using an integration of seismic and well data. Inside this stratigraphic framework, the depositional systems within each K-unit were resolved from characteristic seismic facies, amplitude anomalies, relationship with adjacent reflections, and geomorphologies. In the northern basin segment, the early post-rift stratigraphy contains basin-floor fans, a channel complex and a shoreline-like geometry, whereas the southern basin segment is solely characterised by hemipelagic and carbonate deposition. This spatial variability indicates that one of the dominant controls on the development of the early post-rift depositional systems in the North Viking Graben was the inherited syn-rift fault-controlled topography. The steep slopes bounding the northern basin segment aided the delivery of sediment from the sub-aerial Oseberg source area to the graben whereas the submerged, gentle slopes in the southern basin segment were relatively sediment-starved.Long- and short-term changes in relative sea-level also heavily influenced the evolution of the early post-rift basin stratigraphy. Short-term relative sea-level fall allowed basin-floor fan emplacement whereas short-term relative sea-level stand-still favoured deposition of a channel complex. Deposition of the shoreface-like geometry is associated with a short-term relative sea-level rise. This temporal difference in the style and scale of the depositional systems is also interpreted to reflect the gradual denudation and drowning of the Oseberg source area. Regional short-term trangressive and anoxic events in the northern North Sea further influenced the early post-rift strata, resulting in the deposition of stratigraphic units that can be correlated across the North Sea.  相似文献   

14.
This paper addresses the problem of volume restoration for 3-D sedimentary basin kinematic deformation. The primary purpose is methodological and concerns the use of contact mechanics with the finite element method, in order to deform a geological multi-bloc domain. This approach is applied to backward model the later stage of rifting of a segment of the southern Upper Rhine Graben (France–Germany border). Preliminary results from our modeling demonstrate the ability of the method not only to handle complex geometries, but also to successfully perform retro-deformation of a complex geological domain. In addition, they provide or confirm crucial information on the rifting evolution and tectonic features of this segment of the Upper Rhine Graben, such as the distribution of deformation, the asymmetry of the graben and a significant left-lateral strike-slip component of displacement.  相似文献   

15.
This study analyses the regressive phase of the marine Froidefontaine Subgroup and the subsequent fluvio-lacustrine Niederroedern formation in the southern Upper Rhine Graben during the Late Rupelian and the position of the Rupelian/Chattian boundary. The study is based on the sedimentary record and several microfossil groups from two boreholes, with a focus on new records of fish otoliths, Bolboforma and Charophyta. The biostratigraphic evaluation of these groups provides evidence for a position of the Rupelian/Chattian boundary within the upper Niederroedern Formation. This is contrary to the results from a previous sedimentological approach, which places the boundary at the base of the Niederroedern Formation. The fish fauna indicates a biogeographic relation to southern France, the Molasse Basin of Switzerland and southern Germany.  相似文献   

16.
We determine the source parameters of three minor earthquakes in the Upper Rhine Graben (URG), a Cenozoic rift, using waveforms from permanent and temporary seismological stations. Two shallow thrust-faulting events (M L = 2.4 and 1.5) occurred on the rift shoulder just south of Heidelberg in March 2005. They indicate a possible movement along the sediment–crystalline interface due to tectonic loading from the near-by Odenwald. In February 2005, an earthquake with a normal-faulting mechanism occurred north of Speyer. This event (M L = 2.8) had an unusual depth of about 22 km and a similar deep normal-faulting event occurred there in 1972 (M L = 3.2). Other lower crustal events without fault plane solutions are known from 1981 and 1983. At such a depth, inside the lower crust, ductile behaviour instead of brittle faulting is commonly assumed and used for geodynamic modelling. Based on the newly available fault plane solutions we can confirm the brittle, extensional regime in the upper and lower crust in the central to northern URG indicated in earlier studies.  相似文献   

17.
The southern end of the Upper Rhine Graben (URG) is formed by a major continental transfer zone, which was localised by the reactivation of ENE-oriented basement faults of Late Palaeozoic origin. A combination of subcrop data (derived from exploration wells and reflection seismic lines) and palaeostress analysis provided new constraints on the timing and kinematics of interacting basement faults. Rifting in the southern URG began in the Upper Priabonian under regional WNW–ESE-directed extension, oriented roughly perpendicular to the graben axis. In the study area, this led to the formation of NNE-trending half-grabens. Simultaneously, ENE-trending basement faults, situated in the area of the future Rhine-Bresse Transfer Zone (RBTZ), were reactivated in a sinistrally transtensive mode. In the sedimentary cover the strike-slip component was accommodated by the development of en-échelon aligned extensional flexures. Flexuring and interference between the differently oriented basement faults imposed additional, but locally confined extension in the sedimentary cover, which deviated by as much as 90° from the regional WNW–ESE extension. The interference of regional and local stresses led to a regime approaching radial extension at the intersection between the URG and RBTZ.  相似文献   

18.
The Eocene to Oligocene sediments of the Ecuadorian Oriente Basin record two kinds of second-order stratigraphic response to the tectonic evolution. Lower Eocene shows evidences of local scale syntectonic deposits. This tectonic activity can be related to right lateral convergent movements inverting pre-cretaceous extensional structures. Upper Eocene and Oligocene sediments are integrated as the expression of an isostatic rebound characterizing a basin scale syntectonic deposition. This response is evidenced by a reciprocal architecture of the depositional sequences identified in the sedimentary formations. These data have allowed us to propose a new geodynamic model for the Paleogene evolution of the Oriente Basin.  相似文献   

19.
A compilation of gravity data from the Upper Rhine Graben (URG) is presented that includes all the main data sources from its German and French parts. This data is used to show that the URG consists of, at least, two arc-shaped and asymmetric rift units that tectonically are the basic building blocks of the graben. In this sense the URG does not differ from other continental rifts, such as the African rifts. This division should replace the now classical geomorphologic division of the URG into three segments, based on their different trends. Moreover, the gravity suggests that the faults in the central and southern segments are continuous and have the same trend, appearing to respond as a single kinematic unit. Changes in the gravity field in the graben are shown to reflect not only the structure of the graben, but also the highly variable composition of the basement. In this respect, the URG is quite different from some other Tertiary continental rifts, where possible changes in the composition of the basement are mostly masked in the gravity field by the effect of the overlying low-density sediments. This characteristic is used to study the extent of some of the main basement units that underlie the graben.  相似文献   

20.
A detailed integrated stratigraphic study was carried out on middle Miocene fluvial successions of the Upper Freshwater Molasse (OSM) from the North Alpine Foreland Basin, in eastern Bavaria, Germany. The biostratigraphic investigations yielded six new localities thereby refining the OSM biostratigraphy for units C to E (sensu; Heissig, Actes du Congres BiochroM’97. Mem Trav EPHE, Inst Montpellier 21, 1997) and further improving biostratigraphic correlations between the different sections throughout eastern Bavaria. Radioisotopic ages of 14.55 ± 0.19 and 14.88 ± 0.11 Ma have been obtained for glass shards from the main bentonite horizon and the Ries impactite: two important stratigraphic marker beds used for confirming our magnetostratigraphic calibration to the Astronomical Tuned Neogene Time Scale (ATNTS04; Lourens et al. in Geologic Time Scale 2004, Cambridge University Press, 2004). Paleomagnetic analysis was performed using alternating field (AF) and thermal (TH) demagnetization methods. The AF method revealed both normal and reverse polarities but proofs to yield unreliable ChRM directions for the Puttenhausen section. Using the biostratigraphic information and radioisotopic ages, the magnetostratigraphic records of the different sections are tentatively correlated to the Astronomical Tuned Neogene Time Scale (ATNTS04; Lourens et al. in Geologic Time Scale 2004, Cambridge University Press, 2004). This correlation implies that the main bentonite horizon coincides to chron C5ADn, which is corroborated by its radioisotopic age of 14.55 Ma, whereas the new fossil locality Furth 460, belonging to OSM unit E, probably correlates to chron C5Bn.1r. The latter correlation agrees well with the Swiss Molasse locality Frohberg. Correlations of the older sections are not straightforward. The Brock horizon, which comprises limestone ejecta from the Ries impact, possibly correlates to C5ADr (14.581–14.784 Ma), implying that, although within error, the radioisotopic age of 14.88 ± 0.11 Ma is somewhat too old. The fossil localities in Puttenhausen, belonging to the older part of OSM unit C, probably coincide with chron C5Cn.2n or older, which is older than the correlations established for the Swiss Molasse. Electronic supplementary material The online version of this article (doi: ) contains supplementary material, which is available to authorized users.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号