首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Geochemical stream sediment survey in Winder Valley, Balochistan, Pakistan   总被引：1，自引：0，他引：1  
A pilot scale geochemical survey of sediments from the Winder Stream (SW Pakistan) and its tributaries was carried out. The Winder Stream mainly receives sediment from the southern extensions of the Mor and Pab Ranges in the District of Lasbela (Balochistan). In these two mountain ranges, rocks from Jurassic to Cretaceous age are exposed. Rocks of the Ferozabad Group comprise of carbonates and siliciclastics of Lower–Middle Jurassic age and occupy the dominant part of the Mor Range. These strata host syngenetic and epigenetic Zn–Pb–Ba mineralizations of Stratiform Sediment-Hosted (SSH) and Mississippi Valley Type (MVT) deposits.Quantitative estimates of mobile and immobile elements were made from active stream sediments of the Winder stream and its tributaries. The samples were analyzed for Ag, Zn, Pb, Cu, Ni, Co, V, Mn, Fe and Ba using atomic absorption spectroscopy. The abundance of these elements is discussed in relation to local geological conditions such as bedrock, climate, weathering, mobility and pH of the dispersing waters. A number of Zn anomalies have been distinguished in the study area. Kharrari (Zn, 360 ppm), Sand (Zn, 340 ppm) and Draber (Zn, 210 ppm) are demarcated as new areas for Zn mineralization. The present study also indicates prospects of Ag, Cu and V in the rocks of the Mor Range.Relationships between various elements have been identified from scattergrams and reflect genetic associations. Whereby the positive correlation between Cu–Zn (0.55, n=18) and Cu–Pb (0.63) is related to possible sulphide mineralization.  相似文献   

2.
The Lanping basin is a significant Pb–Zn–Cu–Ag mineralization belt in the Sanjiang Tethyan metallogenic province. A series of sediment-hosted Himalayan Cu–Ag–Pb–Zn polymetallic deposits have been discovered in the western part of the basin, controlled by a thrust–nappe system. In the thrust–nappe system, the Cu orebodies mainly occur in the western and relatively deep part of the mineralization system (the root zone), whereas the Pb–Zn–Ag (± Cu) orebodies occur in the eastern and relatively shallow part of the system (the front zone), both as vein-type mineralization.In this paper we present new data, combined with existing data on fluid inclusions, isotopes and geologic characteristics of representative deposits, to provide the first study that contrasts mineralizing fluids in the Cu–Ag (Mo) and Pb–Zn–Ag (Cu) polymetallic deposits.Fluid inclusion and isotope studies show that the Cu–Ag (Mo) mineralization in the root zone formed predominantly from deep crustal fluids, with the participation of basinal brines. The deep crustal fluids are marked by high CO2 content, relatively high temperatures (280 to 340 °C) and low salinities (1 to 4 wt.% NaCl equivalent), whereas the basinal brine shows relatively low temperatures (160 °C to 220 °C) and high salinities (12 to 22 wt.% NaCl equivalent), containing almost no CO2. In comparison, hydrothermal activity associated with the Pb–Zn–Ag (± Cu) deposits in the front zone is characterized by basinal brine, with relatively low temperatures (130 °C to 180 °C), high salinities (9 to 24 wt.% NaCl equivalent), and low CO2 concentrations. Although evolved meteoric waters have predominantly been proposed as the source for deep crustal fluids, magmatic and metamorphic components cannot be completely excluded. The basinal brine was predominantly derived from meteoric water.The δ34S values of sulfides from the Cu–Ag (Mo) deposits and Pb–Zn–Ag (± Cu) deposits range from − 17.9 to 16.3‰ and from 2.5 to 11.2‰, respectively. These ranges may relate to variations in physicochemical conditions or compositional variation of the sources. Lead isotope compositions indicate that the ore-forming metals were predominantly derived from sedimentary rocks of the Lanping basin.  相似文献   

3.
Abstract: A spectrum of intrusion-related vein gold deposits is recognized. Representative examples are described of the following geochemical associations: Au-Fe oxide–Cu, Au–Cu–Mo–Zn, Au–As–Pb–Zn–Cu, Au–Te–Pb–Zn–Cu and Au–As–Bi–Sb. The associated intrusions range from small outcropping stocks to complex batholiths. The different vein associations are believed to reflect the compositions of related intrusions, which themselves characterize distinct tectonic settings. The Au-Fe oxide–Cu and Au–Cu–Mo–Zn associations belong to two broad groups of deposits, Fe oxide–Cu–Au and porphyry Cu–Au, both of which are related to highly oxidized calc-alkaline intrusions emplaced in sub–duction–related arcs. The Au–As–Pb–Zn–Cu association seems to be linked to somewhat less oxidized intrusions emplaced in a similar setting. The Au–Te–Pb–Zn–Cu association, which possesses well-known epithermal counterparts, is also found with highly oxidized intrusions, but of alkaline composition and back-arc location. In contrast, the Au–As–Bi–Sb association, part of a newly recognized class of intrusion-hosted Au–Bi–W–As deposits, is related to relatively reduced intrusions, spanning the boundary between the magnetite– and ilmenite–series. Such intrusions, which may host major bulk-mineable gold deposits, were emplaced along the landward sides of arcs, possibly during lulls in subduction, as well as in continental collision settings. Therefore, a variety of geological environments is prospective for vein and, by extrapolation, other styles of gold mineralization, not all of them fully appreciated in the past. Several features of vein gold deposits, including imprecise relationships to individual intrusive phases, poorly developed mineral and metal zoning, apparent time gaps between intrusion and mineralization and presence of low–salinity, CO2–rich fluid inclusions, are commonly taken to indicate a non-igneous origin and to be more typical of orogenic (mesothermal) gold deposits generated during accretionary tectonic events. However, several or all of these features apply equally to some intrusion– related vein gold deposits and, therefore, do not constitute distinguishing criteria. The currently popular assignment of most gold-rich veins to the orogenic category requires caution, because of the geological convergence that they show with some intrusion-related deposits. A proper distinction between intrusion-related and orogenic gold deposits is crucial for exploration planning.  相似文献   

4.
《International Geology Review》2012,54(18):2276-2290
ABSTRACT

North Korea is host to world-class metallic mineral deposits, such as the Komdok Cu–Pb–Zn polymetallic mineral belt, but little is known about the resource. To better understand the genesis of the Cu mineralization around the China–North Korea border, we determined the U–Pb, Re-Os, and Rb–Sr ages of three deposits in the area. Sulfide samples from the Hyesan Cu deposit produced Rb–Sr isochron ages of 127.4 ± 4.5 Ma. The Wanbaoyuan Cu deposit yielded a molybdenite Re–Os isochron age of 127.5 ± 3.2 Ma, and a granodiorite sample from the Linjiang Cu deposit gave a zircon U–Pb age of 129.5 ± 0.8 Ma. Combined with geochronological data from previous studies, these new ages suggest that the Cu mineralization occurred mainly during the Cretaceous, and the rollback of the Paleo-Pacific Plate was responsible for the Cu mineralization in NE China–North Korea border.  相似文献   

5.
The Fule Pb–Zn deposit is located in the Sichuan–Yunnan–Guizhou Province, and it is an important and giant low temperature metallogenic domain in China. In our research area, the Pb–Zn deposits are mainly hosted in the Permian Yangxin Formation and are composed of dolostone and limestone. The distance between the ore bodies and the Permian Emeishan basalt ranged from 50 to 160 m. In this study, the nickel rich minerals, including vaesite, polydymite and millerite, were reported for the first time in the Fule deposit. These minerals occurred as xenomorphic mineral aggregate and were sporadically distributed in the sphalerite–galena–calcite vein, which is the main ore type in the deposit. Our study indicated that the paragenetic sequence of minerals in the Fule deposit is the following order: polydymite?→?vaesite?→?millerite?→?sphalerite?→?galena?→?tetrahedrite (tennantite). The geological occurrence characteristics of those nickeliferous minerals suggested that the Permian Emeishan basalt is a possible barrier layer of Pb–Zn ore-forming fluid, and it is an important source for the Ni and part of the Cu in the deposit. The Sichuan–Yunnan–Guizhou Pb–Zn mineralization province is a world-class production base of Pb and Zn, in which the Permian Emeishan basalt and Pb–Zn deposits have uniformly spatial distribution, but the relationship of mineralization between them is still under debate. This report provides new evidence for understanding the relationship between Pb–Zn mineralization and Permian Emeishan basalt in the Sichuan–Yunnan–Guizhou Pb–Zn mineralization province.  相似文献   

6.
维拉斯托锡多金属矿床位于大兴安岭南段西坡的内蒙古克什克腾旗,是近年来发现的一个以锡为主,共伴生钨、锌、铜、钼、铷、铌和钽的大型矿床。矿化类型包括深部以锡为主,伴生锌、铷、铌和钽的蚀变花岗岩型矿体;中部以锡为主,伴生铜和锌的隐爆角砾岩型矿体及浅部锡、钨、锌、铜和钼的石英大脉型和网脉型矿体。该矿床的主要工业矿体为石英脉型,呈北北东向产于古元古界宝音图群和华力西期石英闪长岩中的断裂破碎带内,而蚀变花岗岩型和隐爆角砾岩型矿石的品位较低。文中选取1件石英脉型锡矿体中的锡石样品进行了LA-ICP-MS锡石U-Pb定年,获得锡石的206Pb/207Pb238U/207Pb等时线年龄为(136.0±6.1) Ma(MSWD=0.94),207Pb/206Pb238U/206Pb谐和年龄为(132.3±5.4) Ma(MSWD=2.8),表明维拉斯托锡多金属矿床形成于早白垩世;选取1件与成矿相关的北大山岩体花岗岩样品开展了LA-ICP-MS锆石U-Pb定年,获得206Pb/238U年龄为(140±2) Ma(MSWD=0.10),表明成矿岩体亦形成于早白垩世。维拉斯托锡多金属矿床属于与花岗岩有关的岩浆热液型矿床。通过统计大兴安岭南段主要锡多金属矿床的成矿年龄和成矿岩体的年龄,发现几乎所有的锡多金属矿床均形成于140～135 Ma期间,表明早白垩世是大兴安岭南段锡多金属矿床成矿高峰期。  相似文献   

7.
The presence of base‐metal mineralization at Woodlawn was first recognised early in 1968 when a roadside reconnaissance geochemical sampling survey, conducted over felsic volcanic rocks in the Goulburn‐Tarago area, encountered anomalous B horizon soils containing up to 200 ppm Cu, 800 ppm Pb and 300 ppm Zn. Regional soil thresholds have been determined at 50 ppm Cu, 90 ppm Pb and 50 ppm Zn. Chip samples from the subsequently located gossan revealed up to 2000 ppm Cu, 8000 ppm Pb and 2000 ppm Zn, 500 ppm Sn, 25 ppm Ag and 3000 ppm As.

The first grid B horizon soil geochemical survey was conducted in 1968 over the gossan and surrounding area, and repeated with closer spaced sampling in the first half of 1970. The first survey delineated strong Cu (to 1000 ppm) and Pb (to 2500 ppm) anomalies coincident with the gossan zone, and intense hydromorphic zinc anomalies (to 3000 ppm) located down slope from the gossan in residual clay‐soils derived from dolerite bedrock. Threshold values have been determined at 140 ppm Cu, 700 ppm Pb and 580 ppm Zn. Ag and Sn in B horizon soils show pronounced anomalies coincident with the gossan and are suitable metals for geochemical target definition. Of fourteen trace elements determined in 1974 from B and C horizon soils on two lines across the ore zone Cu, Pb, Zn, Se, Ba, Sn and Ag show direct correlation with the mineralization, whereas Cd and Mn show moderate hydromorphic dispersion, having accumulated principally in clay soils derived from dolerite weathering. As, Sb and Bi, whilst responding over the ore zone, show elevated values in soils over hanging‐wall units; Ni and Co show maximum levels in soils over dolerite bedrock.

Bark and leaves of Acacia mearnsii, collected from a line across the gossan, contain anomalous levels of Cu, Pb, Zn, Sn and Ti near the ore zone, and weaker, but clearly anomalous Mn and Ni levels over dolerite bedrock. Both bark and leaves of Acacia mearnsii reflect the presence of concealed mineralization. The shrub Solanum linearifolium grows preferentially over and close to the Woodlawn ore zone, where it contains up to 840 ppm Cu, 250 ppm Pb, 7300 ppm Zn, 6 ppm Sn and 250 ppm Ti in leaf ash compared with levels of 200 ppm Cu, 2 ppm Pb, 400 ppm Zn, 0.8 ppm Sn and 60 ppm Ti in plants growing 1.5 km from the ore zone. This shrub has potential as an indicator of base‐metal mineralization.  相似文献   

8.
The 3.09 to 2.97 Ga Murchison Greenstone Belt is an important metallotect in the northern Kaapvaal Craton (South Africa), hosting several precious and base metal deposits. Central to the metallotect is the Antimony Line, striking ENE for over 35?km, which hosts a series of structurally controlled Sb–Au deposits. To the north of the Antimony Line, hosted within felsic volcanic rocks, is the Copper–Zinc Line where a series of small, ca. 2.97 Ga Cu–Zn volcanogenic massive sulfide (VMS)-type deposits occur. New data are provided for the Malati Pump gold mine, located at the eastern end of the Antimony Line. Crystallizations of a granodiorite in the Malati Pump Mine and of the Baderoukwe granodiorite are dated at 2,964?±?7 and 2,970?±?7?Ma, respectively (zircon U–Pb), while pyrite associated with gold mineralization yielded a Pb–Pb age of 2,967?±?48?Ma. Therefore, granodiorite emplacement, sulfide mineral deposition and gold mineralization all happened at ca. 2.97?Ga. It is, thus, suggested that the major styles of orogenic Au–Sb and the Cu–Zn VMS mineralization in the Murchison Greenstone Belt are contemporaneous and that the formation of meso- to epithermal Au–Sb mineralization at fairly shallow levels was accompanied by submarine extrusion of felsic volcanic rocks to form associated Cu–Zn VMS mineralization.  相似文献   

9.
The Weilasituo and Bairendaba Zn–Pb–Ag–Cu–(Sn–W) sulphide deposits are located in the southern part of Great Xing'an Range of Inner Mongolia in China. The deposits are located at shallow depths in the newly discovered Weilasituo porphyry hosting Sn–W–Rb mineralization. The mineralization at Weilasituo and Bairendaba consist of zoned massive sulphide veins within fractures cutting the Xilinhot Metamorphic Complex and quartz diorite. The Weilasituo deposit gradually zones from the Cu-rich Zn–Cu sulphide mineralization in the west to Zn-rich Zn–Cu sulphide mineralization in the east. The Bairendaba deposit has a Cu-bearing and Zn-rich core through a transitional zone devoid of copper to an outer zone of Zn–Pb–Ag mineralization. Three main veins contain more than 50 wt.% of the contained metal in the two deposits with their metal ratios displaying a systematic and gradual increase in Zn/Cu, Pb/Zn and Ag/Zn ratios from the western part of Weilasituo to the eastern part of Bairendaba.Three stages of vein-type mineralization are recognized. Early, sub-economic mineralization consists of a variable proportion of euhedral arsenopyrite, pyrite, quartz, and rare wolframite, scheelite, cassiterite, magnetite and cobaltite. This was succeeded by main stage mineralization with economic concentration of zoned Cu, Zn, Pb and Ag sulphide minerals along strike within the veins. The zones consist of the assemblages: (1) pyrrhotite–Fe-rich sphalerite–chalcopyrite(–quartz–fluorite) at west Weilasituo; (2) pyrrhotite–Fe-rich sphalerite–chalcopyrite(–galena–tetrahedrite–quartz–fluorite) at east Weilasituo; (3) pyrrhotite–Fe-rich sphalerite–chalcopyrite(–galena–tetrahedrite–quartz–fluorite) in the centre of Bairendaba; (4) pyrrhotite–Fe-rich sphalerite–galena(–chalcopyrite–tetrahedrite–quartz–fluorite) in the transition zone of Bairendaba; and (5) pyrrhotite–Fe-rich sphalerite–galena–tetrahedrite(–chalcopyrite–falkmanite–argentite–pyrargyrite–quartz–fluorite) in the outer zone at Bairendaba. Post-main ore stage is devoid of sulphides and characterized overprinting of fluorite, sericite, chlorite, illite, kaolinite and calcite.Zircon SHRIMP U–Pb dating, Zircon LA–ICP–MS U–Pb dating, molybdenite Re–Os isochron dating, and muscovite Ar–Ar dating indicate the Beidashan granitic batholith was intruded at 140 ± 3 Ma (MSWD = 3.3), the porphyritic monzogranite from marginal facies of the Beidashan batholith was intruded at 139 ± 2 Ma (MSWD = 0.75), the mineralized quartz porphyry was intruded at 135 ± 2 Ma (MSWD = 0.91), the greisen mineralization occurred at 135 ± 11 Ma (MSWD = 7.2), and the post-main ore stage muscovite deposited at 129.5 ± 0.9 Ma. The new geochronology data show the porphyry Sn–W–Rb and vein-type sulphide mineralization are contemporaneous with granitic magmatism in the region.The metal zonation at the Weilasituo and Bairendaba deposits is a result of progressive metal deposition. This was during the evolution of a metal-bearing fluid along the strike of the veins and during the main stage of ore formation at the upper part of the deep-seated porphyry Sn–W–Rb system. This progressive zonation indicates that the deposits represent end-numbers formed from one ore-forming fluid, which moved from west to east from the porphyry. The metal zonation patterns of the major veins are consistent with metal-bearing fluid entering the system with the precipitation of chalcopyrite proximally and sphalerite, galena and Ag-bearing minerals more distally. We show that the mechanism of metal deposition is therefore controlled by thermodynamic conditions resulting in the progressive separation of sulphides from the metal-bearing fluid. The temperature gradient between the inflow zone and the outflow zone appears to be one of the key parameters controlling the formation of the metal zonation pattern. The sulphide precipitation sequence is consistent with a low fS2 and low fO2 state of the acidic metal-bearing fluid. The metal zonation pattern provides helpful clues from which it is possible to establish the nature of fluid migration and metal deposition models to locate a possible porphyry mineralization at depth in the Great Xing'an Range, which is consistent with the geology of the newly discovered porphyry Sn–W–Rb system.  相似文献   

10.
  相似文献   

11.
Volcanogenic massive sulfide (VMS) deposits are one of the most important base–metal deposit types in China, are major sources of Zn, Cu, Pb, Ag, and Au, and significant sources for Co, Sn, Se, Mn, Cd, In, Bi, Te, Ga, and Ge. They typically occur at or near the seafloor in submarine volcanic environments, and are classified according to base metal content, gold content, or host-rock lithology. The spatial distribution of the deposits is determined by the different geological settings, with VMS deposits concentrated in the Sanjiang, Qilian and Altai metallogenic provinces. VMS deposits in China range in age from Archaean to Mesozoic, and have three epochs of large scale mineralization of Proterozoic, Palaeozoic and Mesozoic. Only Hongtoushan Cu–Zn deposit has been recognized so far in an Archaean greenstone belt, at the north margin of the North China Platform. The Proterozoic era was one of the important metallogenic periods for the formation of VMS mineralization, mainly in the Early and Late Proterozoic periods. VMS-type Cu–Fe and Cu–Zn deposits related to submarine volcanic-sedimentary rocks, were formed in the Aulacogens and rifts in the interior and along both sides of the North China Platform, and the southern margin of the Yangtze Platform. More than half of the VMS deposits formed in the Palaeozoic, and three important VMS–metallogenic provinces have been recognized, they are Altai–Junggar (i.e. Ashele Cu–Pb–Zn deposit), Sanjiang (i.e. Laochang Zn–Pb–Cu deposit) and Qilian (i.e. Baiyinchang Cu–Zn deposit). The Triassic is a significant tectonic and metallogenic period for China. In the Sanjiang Palaeo–Tethys, the Late Triassic Yidun arc is the latest arc–basin system, in which the Gacun-style VMS Pb–Zn–Cu–Ag deposits developed in the intra-arc rift basins, with bimodal volcanic suites at the northern segment of the arc.  相似文献   

12.
The coexistence of Pb‐Zn deposits and oil/gas reservoirs demonstrates that a close genetic connection exists between them. The spatiotemporal relationship between Pb‐Zn mineralization and hydrocarbon accumulation is the key to understanding this genetic connection. The Mayuan large‐scale Pb‐Zn metallogenic belt is composed of a number of Mississippi Valley‐type (MVT) Pb‐Zn deposits that were recently discovered on the northern margin of the Yangtze Block, China. It is hosted in the dolostone of the Sinian (Ediacaran) Dengying Formation (Z2dn). In addition to the abundant bitumen in the Mayuan Pb‐Zn metallogenic belt, the paleo‐oil reservoir and the MVT Pb‐Zn deposit overlap in space. In this study, two precise ages of 468.3 ± 3.8 Ma and 206.0 ± 6.5 Ma were obtained via the Rb‐Sr isotopic dating of galena and sphalerite from the Mayuan Pb‐Zn metallogenic belt, respectively. The early metallogenic age of 468.3 ± 3.8 Ma is similar to the previously published age of 486 ± 12 Ma. The age of 206.0 ± 6.5 Ma is consistent with the age of the metallogenic event that occurred at 200 Ma in the Upper Yangtze Pb–Zn metallogenic province of the Sichuan‐Yunnan‐Guizhou polymetallic zone, which is located on the southwest margin of the Sichuan Basin, suggesting that the metallogenic effects of this period were regional in scale in the peripheral areas of the Sichuan Basin. Previous studies have shown that two periods of hydrocarbon accumulation occurred in the oil/gas reservoir that coexists with the Pb‐Zn deposits in the study area. The Pb‐Zn mineralization at 468.3 ± 3.8 Ma occurred during the first period of hydrocarbon accumulation, while the second mineralization at 206.0 ± 6.5 Ma occurred during the transformation of the paleo‐oil reservoir to a paleogas reservoir. The spatial relationship between the paleo‐oil/‐gas reservoir and the MVT Pb‐Zn deposits and the temporal relationship between mineralization and hydrocarbon accumulation show that a close genetic relationship exists between the MVT Pb‐Zn mineralization and hydrocarbon accumulation. Analysis of metals in the source rocks forming the paleo‐oil/‐gas reservoirs show that source rocks which formed paleo‐oil/‐gas reservoirs may have provided metals for Pb‐Zn mineralization. Both the paleo‐oil/‐gas reservoirs and Pb‐Zn mineralizing fluids had the same origin.  相似文献   

13.
The Central Asian Orogenic Belt (CAOB) constitutes the largest Phanerozoic accretionary orogen on Earth. It extends over 5000 km and hosting numerous metal deposits. The Chinese Altay Orogen, an important element of the CAOB, hosts abundant Devonian (ca. 410–370 Ma) deposits. The 40Ar/39Ar dating of seven mica separates from the representative samples syngenetic with orogenic-type mineralization is summarized to record a poorly studied Permian to Triassic metallogenic episode in the Chinese Altay Orogen. The Kelan and Maizi basins in the Chinese Altay Orogen, which likely represent an arc accretionary complex, contain a series of polymetallic lode deposits hosted in low-grade metamorphic volcano–sedimentary rocks. Two muscovite and five biotite separates were obtained from the ore-forming veins paragenetically associated with Au-bearing polymetallic sulfides in the Keketale Pb–Zn, Wulasigou Cu, Tiemurt Pb–Zn, Dadonggou Pb–Zn and Sarekuobu Au deposits. These separates yielded 40Ar/39Ar plateau ages ranging from 260 Ma to 205 Ma. Integration of these results with other published geological and geochronological data indicates that the Au–Cu–Pb–Zn mineralization post-dated the final CAOB assembly, with fluid movement and mineralization possibly driven by regional metamorphism and deformation. It is herein proposed for a metallogenic model that the metamorphic fluid migration following final assembly of the CAOB results into the formation of the deposits.  相似文献   

14.
The geotectonic units of Zhejiang Province include the Yangtze Plate in the northwest juxtaposed against the South China fold system in the southeast along the Jiangshan–Shaoxing fault. The South China fold system is further divided into the Chencai–Suichang uplift belt and the Wenzhou–Linhai geotectogene belt, whose boundary is the Yuyao–Lishui fault. The corresponding metallogenic belts are the Mo–Au(–Pb–Zn–Cu) metallogenic belt in northwest Zhejiang, the Chencai–Suichang Au–Ag–Pb–Zn–Mo metallogenic belt, and the coastal Ag–Pb–Zn–Mo–Au metallogenic belt. The main Mesozoic metal ore deposits include epithermal Au–Ag(Ag), hydrothermal vein-type Ag–Pb–Zn(Cu), and porphyry–skarn-type Mo and vein-type Mo deposits. These ore bodies are related to the Mesozoic volcanic-intrusive structure: the epithermal Au–Ag(Ag) deposits are represented by the Zhilingtou Au–Ag deposit and Houan Ag deposit and their veins are controlled by volcanic structure; the hydrothermal vein-type Ag–Pb–Zn deposits are represented by the Dalingkou Ag–Pb–Zn deposit and also controlled by volcanic structure; and the porphyry–skarn-type Mo deposits are represented by the Tongcun Mo deposit and the vein-type Mo deposits are represented by the Shipingchuan Mo deposit, all of which are related to granite porphyries. These metal ore deposits have close spatio-temporal relationships with each other; both the epithermal Au–Ag(Ag) deposits and the hydrothermal vein-type Ag–Pb–Zn deposits exhibit vertical zonations of the metallic elements and form a Mo–Pb–Zn–Au–Ag metallogenetic system. These Jurassic–Cretaceous deposits may be products of tectonic-volcanic-intrusive magmatic activities during the westward subduction of the Pacific Plate. Favourable metallogenetic conditions and breakthroughs in the recent prospecting show that there is great resource potential for porphyry-type deposits (Mo, Cu) in Zhejiang Province.  相似文献   

15.
Jilin Province in NE China lies on the eastern edge of the Xing–Meng Orogenic Belt. Mineral exploration in this area has resulted in the discovery of numerous large, medium, and small sized Cu, Mo, Au, and Co deposits. To better understand the formation and distribution of both the porphyry and skarn types Cu deposits of the region, we examined the geological characteristics of the deposits and applied zircon U–Pb and molybdenite Re–Os isotope dating to constrain the age of the mineralization. The Binghugou Cu deposit yields a zircon U–Pb age for quartz diorite of 128.1 ± 1.6 Ma; the Chang'anpu Cu deposit yields a zircon U–Pb age for granite porphyry of 117.0 ± 1.4 Ma; the Ermi Cu deposit yields a zircon U–Pb age for granite porphyry of 96.8 ± 1.1 Ma; the Tongshan Cu deposit yields molybdenite Re–Os model ages of 128.7 to 130.2 Ma, an isochron age of 129.0 ± 1.6 Ma, and a weighted mean model age of 129.2 ± 0.7 Ma; and the Tianhexing Cu deposit yields molybdenite Re–Os model ages of 113.9 to 115.2 Ma, an isochron age of 114.7 ± 1.2 Ma, and a weighted mean model age of 114.7 ± 0.7 Ma. The new ages, combined with existing geochronology data, show that intense porphyry and skarn types Cu mineralization was coeval with Cretaceous magmatism. The geotectonic processes responsible for the genesis of the Cu mineralization were probably related to lithospheric thinning. By analyzing the accumulated molybdenite Re–Os, zircon U–Pb, and Ar–Ar ages for NE China, it is concluded that the Cu deposits formed during multiple events coinciding with periods of magmatic activity. We have identified five phases of mineralization: early Paleozoic (~476 Ma), late Paleozoic (286.5–273.6 Ma), early Mesozoic (~228.7 Ma), Jurassic (194.8–137.1 Ma), and Cretaceous (131.2–96.8 Ma). Although Cu deposits formed during each phase, most of the Cu mineralization occurred during the Cretaceous.  相似文献   

16.
The possibility of using the species Silene compacta Fischer (Caryophyllaceae) as a plant indicator for Zn, Fe and Cu is discussed in this paper. Rock and plant samples were collected from an area near Essimi, north-eastern Greece, which is known for its Cu–Pb–Zn mineralization and analyzed for their content in 14 elements (Fe, Mn, Ag, As, Cd, Co, Cu, Mo, Ni, Pb, Sb, Sn, Zn and V). The data illustrate positive linear correlation between the concentrations of Zn, Fe and Cu in plant ash and rock samples. In particular, these correlations are 0.99 for Zn, 0.97 for Fe and 0.97 for Cu and are significant at the 99.9% confidence level. Therefore, S. compacta could be used as a plant indicator for Zn, Fe and Cu mineralization.  相似文献   

17.
The Qin–Hang ore belt in South China, which serves as the boundary between the Yangtze and Cathaysia blocks, is marked by extensive Jurassic porphyry-skarn-metasomatic Cu–Pb–Zn polymetallic mineralization. In this contribution, S and Pb isotopic compositions of the Baoshan Cu–Pb–Zn deposit in the western portion of the Qin–Hang ore belt were analyzed to determine the ore-forming material sources in the area. This is coupled by the first systematic collection, compilation and interpretation of previously published S and Pb isotopic data of multiple sulfide minerals to reveal the metal origin and accumulation mechanism of the Cu–Pb–Zn mineralization from the significant deposits in the region (i.e., Dexing, Qibaoshan, Shuikoushan, Baoshan, Huangshaping, Tongshanling and Dabaoshan). The results show that Cu mineralization is characterized by low and narrow δ34S (‰) range of values (–5 to 6) and Pb isotopic ratios (208Pb/204Pb = 38.0–39.0, 207Pb/204Pb = 15.4–15.8, and 206Pb/204Pb = 17.7–18.7), which are consistent with those of local porphyries. In contrast, the Pb–Zn mineralization reveals higher and more variable δ34S (‰) values (–4 to 18) and Pb isotopic ratios (208Pb/204Pb = 38.0–39.5, 207Pb/204Pb = 15.3–16.0, and 206Pb/204Pb = 18.0–19.0) that correspond to wall-rock and basement rock compositions in the region. This indicates that the sulfur and lead that formed the Cu mineralization in the Qin–Hang ore belt was mainly sourced from regional magmatism with mantle contributions, whereas the sulfur and lead for the Pb–Zn mineralization was likely derived from the host sedimentary rocks and Proterozoic metamorphic basement rocks, respectively. The S and Pb isotopic data, combined with the geochemical signatures of mineralization-related porphyries, suggest that the Cu was sourced from the deeper levels along with mantle-derived magmas. In contrast, the Pb–Zn probably originated from the crust, with partial melting of the crystalline basement in the Cathaysia Block. Consequently, a three-stage genetic model is proposed to explain the ore-forming processes of the Qin–Hang Cu-polymetallic belt in South China.  相似文献   

18.
The Southern Great Xing'an Range(S(GXR)which forms part of the eastern segment of the Central Asian Orogenic Belt(CAOB)is known as one of the most important Cu-Mo-Pb-Zn-Ag-Au metallogenic belts in China,hosting a number of porphyry Mo(Cu),skarn Fe(Sn),epithermal Au-Ag,and hydrothermal veintype Ag-Pb-Zn ore deposits.Here we investigate the Bianjiadayuan hydrothermal vein-type Ag-Pb-Zn ore deposit in the southern part of the SGXR.Porphyry Sn± Cu± Mo mineralization is also developed to the west of the Ag-Pb-Zn veins in the ore field.We identify a five-stage mineralization process based on field and petrologic studies including(i)the early porphyry mineralization stage,(ii)main porphyry mineralization stage,(iii)transition mineralization stage,(iv)vein-type mineralization stage and(v)late mineralization stage.Pyrite is the predominant sulfide mineral in all stages except in the late mineralization stage,and we identify corresponding four types of pyrites:Pyl is medium-grained subhedral to euhedral occurring in the early barren quartz vein;Py2 is medium-to fine-grained euhedral pyrite mainly coexisting with molybdenite,chalcopyrite,minor sphalerite and galena;Py3 is fine-grained,subhedral to irregular pyrite and displays cataclastic textures with micro-fractures;Py4 occurs as euhedral microcrystals and forms irregularly shaped aggregate with sphalerite and galena.LA-ICP-MS trace element analyses of pyrite show that Cu,Pb,Zn,Ag,Sn,Cd and Sb are partitioned into pyrite as structurally bound metals or mineral micro/nano-inclusions,whereas Co,Ni,As and Se enter the lattice via isomorphism in all types of pyrite.The Cu,Zn,Ag,Cd concentrations gradually increase from Pyl to Py4,which we correlate with cooling and mixing of ore-forming fluid with meteoric water.Py2 contains the highest contents of Co,Ni,Se,Te and Bi,suggesting high temperature conditions for the porphyry mineralization stage.Ratios of Co/Ni(0.03-10.79,average 2.13)and sulphur isotope composition of sulfide indicate typical hydrothermal origin for pyrites.The δ~(34)S_(cDT) values of Pyl(0.42‰-1.61‰,average1.16‰),Py2(-1.23‰to 0.82‰,average 0.35‰),Py3(—0.36‰to 2.47‰average 0.97‰).Py4(2.51‰--3.72‰,average 3.06‰),and other sulfides are consistent with those of typical porphyry deposit(-5‰to 5‰),indicating that the Pb-Zn polymetallic mineralization in the Bianjiadayuan deposit is genetically linked to the Yanshanian(Jurassic-Cretaceous)magmatic-hydrothermal events.Variations of δ~(34) S values are ascribed to the changes in physical and chemical conditions during the evolution and migration of the ore-forming fluid.We propose that the high Sn content of pyrite in the Bianjiadayuan hydrothermal vein-type Pb-Zn polymetallic deposit can be used as a possible pathfinder to prospect for Sn mineralization in the surrounding area or deeper level of the ore field in this region.  相似文献   

19.
Southern Hunan Province, South China, is located in the central part of the Qin–Hang metallogenic belt and is characterized by abundant Cu–Pb–Zn and W–Sn polymetallic ore deposits. The Cu–Pb–Zn deposits are associated with Jurassic granodiorite porphyries whereas the W–Sn deposits occur within Jurassic granite porphyries. Here we present geochronologic and geochemical data for the Tongshanling Cu–(Mo)–Pb–Zn deposit and the Weijia W deposit in the district of Tongshanling, southern Hunan. Zircon U–Pb dating and molybdenite Re–Os geochronology indicate that the emplacement of the Tongshanling granodiorite porphyry and the associated Cu mineralization occurred at 162–160 Ma, slightly earlier than the formation of the Xianglinpu granite porphyry and associated W mineralization at 159–158 Ma. The Tongshanling granodiorite is high-K calc-alkaline, weakly peraluminous, and weakly fractionated with zircon εHf(t) values of − 15.1 to − 5.6. In contrast, the Xianglinpu granite is alkaline, peraluminous, and highly fractionated, with εHf(t) values of − 9.5 to 0.9. Our data indicate that the Tongshanling granodiorite is relatively oxidized and was formed by the partial melting of Paleoproterozoic crustal material with inputs of mafic magma which was derived from a subduction-modified lithospheric mantle. In contrast, the Xianglinpu granite porphyry is relatively reduced and was formed by direct interaction between the crust and asthenospheric mantle. The difference in magma generation and tectonics is considered to have resulted in the different types of mineralization associated with these two intrusive bodies.  相似文献   

20.
北山地区植被属戈壁荒漠植被类型，主要植物群落为红沙，红沙中多数元素特别是成矿元素及其伴生元素的含量和变化系数矿区大于背景区，元素含量背景区呈对数正态分布，矿区呈偏对数正态或多峰分布，红沙中的元素组合分类背景区为Au,Cu,Pb,Zn,As,Sb,Mo,V,Mn和Ag,Sn,Sr,Ba及Ti,Cr,Co,Ni,金矿区为Au,Ag,As,Sb,Mo,Mn,Sr和Cu,Pb,Zn,Sn,Ba及Co,Ni,Ti,V,Cr,铜矿区为Cu,Pb,Zn,Mo,Au,Ag,Ba和As,Sb,Sn,Mn及Ti,V,Cr,Co,Ni,Sr，矿区红沙中浓集系数较大的元素多数在矿区岩石中的浓集系统亦较大，金，铜矿床红沙和岩石中的特征元素分别都有Au,Ag,Ag,Sb,Mo,(Mn)和Cu,Pb,(Ba,Ti,Cr)。在金，铜矿床（体上方分别发育有良好的Au和Cu的生物地球化学异常和元素组合及分带，根据红沙的地球化学特征能，判断金或铜矿种类型，并能对掩埋，隐伏金，铜矿床（体）进行定位预测。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号