首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 468 毫秒
1.
We investigate the evolution of passive continental margin sedimentary basins that contain salt through two‐dimensional (2D) analytical failure analysis and plane‐strain finite‐element modelling. We expand an earlier analytical failure analysis of a sedimentary basin/salt system at a passive continental margin to include the effects of submarine water loading and pore fluid pressure. Seaward thinning sediments above a weak salt layer produce a pressure gradient that induces Poiseuille flow in the viscous salt. We determine the circumstances under which failure at the head and toe of the frictional–plastic sediment wedge occurs, resulting in translation of the wedge, landward extension and seaward contraction, accompanied by Couette flow in the underlying salt. The effects of water: (i) increase solid and fluid pressures in the sediments; (ii) reduce the head to toe differential pressure in the salt and (iii) act as a buttress to oppose failure and translation of the sediment wedge. The magnitude of the translation velocity upon failure is reduced by the effects of water. The subsequent deformation is investigated using a 2D finite‐element model that includes the effects of the submarine setting and hydrostatic pore pressures. The model quantitatively simulates a 2D approximation of the evolution of natural sedimentary basins on continental margins that are formed above salt. Sediment progradation above a viscous salt layer results in formation of landward extensional basins and listric normal growth faults as well as seaward contraction. At a later stage, an allochthonous salt nappe overthrusts the autochthonous limit of the salt. The nature and distribution of major structures depends on the sediment properties and the sedimentation pattern. Strain weakening of sediment favours landward listric growth faults with formation of asymmetric extensional depocentres. Episodes of low sediment influx, with partial infill of depocentres, produce local pressure gradients in the salt that result in diapirism. Diapirs grow passively during sediment aggradation.  相似文献   

2.
Scaled sandbox models simulated primary controls on the kinematics of the early structural evolution of salt‐detached, gravity‐driven thrust belts on passive margins. Models had a neutral‐density, brittle overburden overlying a viscous décollement layer. Deformation created linked extension–translation–shortening systems. The location of initial brittle failure of the overburden was sensitive to perturbations at the base of the salt. Salt pinch‐out determined the seaward limit of the thrust belt. The thrust belts were dominated by pop‐up structures or detachment folds cut by break thrusts. Pop‐ups were separated by flat‐bottomed synclines that were partially overthrust. Above a uniformly dipping basement, thrusts initiated at the salt pinch‐out then consistently broke landward. In contrast, thrust belts above a seaward‐flattening hinged basement nucleated above the hinge and then spread both seaward and landward. The seaward‐dipping taper of these thrust belts was much lower than typical, frictional, Coulomb‐wedge models. Towards the salt pinch‐out, frictional resistance increased, thrusts verged strongly seawards and the dip of the taper reversed as the leading thrust overrode this pinch‐out. We attribute the geometry of these thrust belts to several causes. (1) Low friction of the basal décollement favours near‐symmetric pop‐ups. (2) Mobile salt migrates away from local loads created by overthrusting, which reduces the seaward taper of the thrust belt. (3) In this gravity‐driven system, shortening quickly spreads to form wide thrust belts, in which most of the strain overlapped in time.  相似文献   

3.
This paper examines interactions among syn‐rift continental margin extension, evaporites, particularly rocksalt (halite), deposited in the overlying sedimentary basins, and clastic sediment loading. We present dynamically evolving 2D numerical models that combine syn‐rift lithospheric extension, with salt (viscous halite, 1018–1019 Pa s) and clastic (frictional‐plastic) sediment deposition to investigate how salt is distributed and subsequently mobilized during syn‐rift extension. Example results are shown, contrasting salt deposition in the early, mid and late syn‐rift phases of a single lithospheric extension model. The lithospheric model is chosen to give depth‐dependent extension and intermediate width margins with proximal grabens and a hyperextended distal region. The models exhibit diachronous migration of extension towards the rift axis and this is reflected in the faulting of overlying sediments. The models illustrate the roles of timing of salt deposition, relative to rifting and subsequent sedimentation, in defining the location and deformation of syn‐rift salt, with post‐salt sediment progradation in some models. Late deposition of salt leads to increased lateral extent of the original salt body and decreased variation in salt thickness. Seaward flow of salt increases with later deposition; early syn‐rift salt is deposited and trapped in the grabens, whereas mid and late syn‐rift salt tends to flow towards the distal margin or even over the oceanic crust. Prograding clastic post‐salt sediments drive more substantial seaward movement of mid and late syn‐rift salt. A numerical model of the Red Sea with evaporite deposition during the mid to late syn‐rift period, preceded and followed by aggrading and prograding clastic sediment, shows reasonable agreement with observations from the central Red Sea.  相似文献   

4.
Tectonic subsidence in rift basins is often characterised by an initial period of slow subsidence (‘rift initiation’) followed by a period of more rapid subsidence (‘rift climax’). Previous work shows that the transition from rift initiation to rift climax can be explained by interactions between the stress fields of growing faults. Despite the prevalence of evaporites throughout the geological record, and the likelihood that the presence of a regionally extensive evaporite layer will introduce an important, sub‐horizontal rheological heterogeneity into the upper crust, there have been few studies that document the impact of salt on the localisation of extensional strain in rift basins. Here, we use well‐calibrated three‐dimensional seismic reflection data to constrain the distribution and timing of fault activity during Early Jurassic–Earliest Cretaceous rifting in the Åsgard area, Halten Terrace, offshore Mid‐Norway. Permo‐Triassic basement rocks are overlain by a thick sequence of interbedded halite, anhydrite and mudstone. Our results show that rift initiation during the Early Jurassic was characterised by distributed deformation along blind faults within the basement, and by localised deformation along the major Smørbukk and Trestakk faults within the cover. Rift climax and the end of rifting showed continued deformation along the Smørbukk and Trestakk faults, together with initiation of new extensional faults oblique to the main basement trends. We propose that these new faults developed in response to salt movement and/or gravity sliding on the evaporite layer above the tilted basement fault blocks. Rapid strain localisation within the post‐salt cover sequence at the onset of rifting is consistent with previous experimental studies that show strain localisation is favoured by the presence of a weak viscous substrate beneath a brittle overburden.  相似文献   

5.
The Colombian accretionary complex forms the active convergent margin of the North Andes block of South America beneath which the east Panama Basin of the Nazca plate is subducted at a rate of 50–64 km Myr?1. Multichannel seismic reflection data, collected as part of RRS Charles Darwin cruise CD40, image a series of well-developed forearc basins along the length of the margin, bounded on their oceanward side by an active accretionary complex and on their landward side by oceanward-dipping continental basement. Sedimentary sequences within the forearc basins indicate successive landward migration of the basin depocentre as the structural high bounding its oceanward edge is forced upward and landward by continued growth of the accretionary complex. Uplift beneath the oceanward side of the basins has resulted in progressive landward rotation of the older sedimentary sequences. Prominent seismic reflectors across the basins show a complex onlap–offlap relationship between successive sequences that reflects the interplay between tectonic uplift, sediment supply, differential sediment compaction and basement subsidence due to loading. A numerical model has been devised to investigate how Miocene to Recent forearc basin stratigraphy is controlled by progressive growth of the accretionary complex resulting in elevation of the outer-arc high and landward motion of the rear of the complex up the seaward-dipping backstop formed by the leading edge of the continental lithosphere. The effects of sediment accretion are modelled by treating the accretionary complex as a doubly vergent, noncohesive Coulomb wedge, where forces exerted by the proto- and retro-wedges must be balanced for the system to be in equilibrium. The model generates synthetic basin-fill architecture over a series of steps, each of which represents the deposition of individual sedimentary sequences and their subsequent deformation due to wedge growth. The model accounts for differential sediment compaction and the flexural response of the underlying lithosphere to changes in load distribution over time. Forearc basin evolution is simulated for various rates of sediment supply to the forearc and accretionary complex growth until the synthetic basin-fill geometry matches the observed geometry. The model enables either the rate of accretionary wedge growth or the rate of sediment supply to the forearc basin to be established. The technique is generally applicable to those convergent margins with forearc basins that have developed between an actively accreting wedge and a seaward-dipping backstop. Other examples include Peru, S. Chile, Sumatra and Barbados.  相似文献   

6.
Seismic reflection and well stratigraphic data are used to investigate the post‐Jurassic evolution of the Northern Lusitanian Basin, offshore west Iberia. Stratigraphic correlations between 11 exploration wells were attained in order to characterize the variations in depositional facies associated with salt tectonics. Latest Triassic–Hettangian salt, which generated multiple salt pillows during the Jurassic rifting, was reactivated after the early Aptian in two main phases. The first phase stretches from the late Turonian to the Maastrichtian. The second relates to Miocene tectonic inversion. The compression of the post‐salt overburden caused the amplification of Jurassic detachment folds, forming barriers to the westward progradation of sediment into distinct salt‐withdrawal sub‐basins. Particularly during the Miocene, thin‐skinned overburden shortening was accommodated by growing salt structures that suffered thrusting and extrusion. This structural style contrasts with that of salt‐scarce areas where a simple westerly tilted, fault‐bounded monocline was generated.  相似文献   

7.
We use three‐dimensional (3D) seismic reflection data to analyse the architecture of the footwall of a listric fault, in a gravitationally driven extensional system, in the north‐western Niger Delta. In contrast to conventional listric normal fault models with a single master listric fault plane the level of detachment switches from a deeper to shallower level. The footwall evolves through the generation of new master detachment faults and detachments, which transfers hanging wall rocks into the footwall. New detachments form by branching off pre‐existing detachment levels, cutting‐up through stratigraphy to the next mechanical weakness, separating discrete sections of extended strata. As a consequence a deeper, older array of seaward‐dipping, tilted extensional fault blocks is now located in the footwall beneath the master listric detachment fault. The structural complexity located below the master detachment fault highlights extensional episodes on separate detachment faults that are not captured in conventional listric models. We speculate that changes in the level of the detachment are caused by mechanical weaknesses controlled by lithology, pore pressure and episodes of sediment loading related to deltaic progradation.  相似文献   

8.
We describe the tectono‐sedimentary evolution of a Middle Jurassic, rift‐related supra‐detachment basin of the ancient Alpine Tethys margin exposed in the Central Alps (SE Switzerland). Based on pre‐Alpine restoration, we demonstrate that the rift basin developed over a detachment system that is traced over more than 40 km from thinned continental crust to exhumed mantle. The detachment faults are overlain by extensional allochthons consisting of upper crustal rocks and pre‐rift sediments up to several kilometres long and several hundreds of metres thick, compartmentalizing the distal margin into sub‐basins. We mapped and restored one of these sub‐basins, the Samedan Basin. It consists of a V‐shape geometry in map view, which is confined by extensional allochthons and floored by a detachment fault. It can be restored over a minimum distance of 11 km along and about 4 km perpendicular to the basin axis. Its sedimentary infill can be subdivided into basal (initial), intermediate (widening) and top (post‐tectonic) facies tracts. These tracts document (1) formation of the basin initially bounded by high‐angle faults and developing into low‐angle detachment faults, (2) widening of the basin and (3) migration of deformation further outboard. The basal facies tract is made of locally derived, poorly sorted gravity flow deposits that show a progressive change from hangingwall to footwall‐derived lithologies. Upsection the sediments develop into turbidity current deposits that show retrogradation (intermediate facies tract) and starvation of the sedimentary system (post‐tectonic facies tract). On the scale of the distal margin, the syn‐tectonic record documents a thinning‐ and fining‐upward sequence related to the back stepping of the tectonically derived sediment source, progressive starvation of the sedimentary system and migration of deformation resulting in exhumation and progressive delamination of the thinned crust during final rifting. This study provides valuable insights into the tectono‐sedimentary evolution and stratigraphic architecture of a supra‐detachment basin formed over hyper‐extended crust.  相似文献   

9.
This study documents two different modes of berm development: (1) vertical growth at spring tides or following significant beach cut due to substantial swash overtopping, and (2) horizontal progradation at neap tides through the formation of a proto-berm located lower and further seaward of the principal berm. Concurrent high-frequency measurements of bed elevation and the associated wave runup distribution reveal the details of each of these berm growth modes. In mode 1 sediment is eroded from the inner surf and lower swash zone where swash interactions are prevalent. The net transport of this sediment is landward only, resulting in accretion onto the upper beach face and over the berm crest. The final outcome is a steepening of the beach face gradient, a change in the profile shape towards concave and rapid vertical and horizontal growth of the berm. In mode 2 sediment is eroded from the lower two-thirds of the active swash zone during the rising tide and is transported both landward and seaward. On the falling tide sediment is eroded from the inner surf and transported landward to backfill the zone eroded on the rising tide. The net result is relatively slow steepening of the beach face, a change of the profile shape towards convex, and horizontal progradation through the formation of a neap berm. The primary factor determining which mode of berm growth occurs is the presence or absence of swash overtopping at the time of sediment accumulation on the beach face. This depends on the current phase of the spring-neap tide cycle, the wave runup height (and indirectly offshore wave conditions) and the height of the pre-existing berm. A conceptual model for berm morphodynamics is presented, based on sediment transport shape functions measured during the two modes of berm growth.  相似文献   

10.
Loading of subsurface salt during accumulation of fluvial strata can result in halokinesis and the growth of salt pillows, walls and diapirs. Such movement may eventually result in the formation of salt‐walled mini‐basins, whose style of architectural infill may be used to infer both the relative rates of salt‐wall growth and sedimentation and the nature of the fluvial‐system response to salt movement. The Salt Anticline Region of the Paradox Basin of SE Utah comprises a series of elongate salt‐walled mini‐basins, arranged in a NW‐trending array. The bulk of salt movement occurred during deposition of the Permian Cutler Group, a wedge of predominantly quartzo‐feldspathic clastic strata comprising sediment derived from the Uncompahgre Uplift to the NE. The sedimentary architecture of selected mini‐basin fills has been determined at high resolution through outcrop study. Mini‐basin centres are characterized by multi‐storey fluvial channel elements arranged into stacked channel complexes, with only limited preservation of overbank elements. At mini‐basin margins, thick successions of fluvial overbank and sheet‐like elements dominate in rim‐syncline depocentres adjacent to salt walls; many such accumulations are unconformably overlain by single‐storey fluvial channel elements that accumulated during episodes of salt‐wall breaching. The absence of gypsum clasts suggests that sediment influx was high, preventing syn‐sedimentary surface exposure of salt. Instead, fluvial breaching of salt‐generated topography reworked previously deposited sediments of the Cutler Group atop growing salt walls. Palaeocurrent data indicate that fluvial palaeoflow to the SW early in the history of basin infill was subsequently diverted to the W and ultimately to the NW as the salt walls grew to form topographic barriers. Late‐stage retreat of the Cutler fluvial system coincided with construction and accumulation of an aeolian system, recording a period of heightened climatic aridity. Aeolian sediments are preserved in the lees of some salt walls, demonstrating that halokinesis played a complex role in the differential trapping of sediment.  相似文献   

11.
Active diapirs are commonly observed in sedimentary basins worldwide. Factors controlling overburden deformation processes and patterns during the active rise of active diapirs, such as sediment cohesion and overburden thickness, are not well understood. We have utilised the discrete element numerical simulation method to simulate active diapirism in models comprised of sediments with varying cohesions and roof thicknesses. We found that sediment cohesion can significantly affect overburden deformation with low-cohesion sediments favouring the generation of a broad, smooth forced fold and a symmetric graben, while high-cohesion sediments favour the formation of master reverse faults and preferentially uplifted and rotated fault blocks in their hangingwalls in the central crest, with an overall asymmetric structural geometry. Moreover, overburden thickness does not significantly affect structural styles in the overburden. Our results also suggest that the higher the sediment cohesion, the higher the amplitude (the lower the wavelength) of the forced fold above the rising diapir becomes. Our models produced a wide spectrum of deformation structures that resemble those in nature and reveal a strong link between structural styles and sediment diagenesis in the context of active diapir-piercing sediments with varying degrees of lithification.  相似文献   

12.
The Plataforma Burgalesa is a partly exposed extensional forced fold system with an intermediate salt layer, which has developed along the southern portion of the Basque‐Cantabrian Basin from Malm to Early Cretaceous as part of the Bay of Biscay‐Pyrenean rift system. Relationships between syn‐ and pre‐rift strata of the supra‐salt cover sequence and distribution of intra‐cover second‐order faults are observed both along seismic sections and at the surface. These relationships indicate an along‐strike variability of the extensional structural style. After a short period of salt mobilization and forced folding, high slip rates in the central portion of the major basement faults have rapidly promoted brittle behaviour of the salt layer, preventing further salt mobilization and facilitating the propagation of the fault across the salt layer. In contrast, at the tip regions of basement faults, slower slip rates have facilitated ductile salt behaviour, ensuring its further evaporite evacuation, preventing fault propagation across the salt layer and, in essence, allowing for a long‐living forced folding process. Our results indicate the important effect of along‐strike variation in displacement and displacement rates in controlling evaporite behaviour in extensional basins. Amount of displacement and displacement rates are key factors controlling the propagation of basement faults across evaporite layers. In addition, growth strata patterns are recognized as a powerful tool for constraining the up‐dip propagation history of basement faults in extensional fault‐related fold systems with intermediate décollement levels.  相似文献   

13.
The Miocene Waitemata Basin was deposited on a moving base provided by the Northland Allochthon, which was emplaced in the Late Oligocene, as a new convergent plate boundary was established in northern New Zealand. The basin experienced complex interaction between tectonic and gravity‐driven shallow deformation. Spectacular examples of the resulting structures exposed on eastern Whangaparaoa Peninsula 50 km north of Auckland provide a world‐class example of weak rock deformation, the neglected domain between soft‐sediment and hard rock deformation. Quartz‐poor turbidite sequences display a protracted sequence of deformations: D1, synsedimentary slumping; D2, large scale deeper‐seated sliding and extensional low‐angle shearing, associated with generation of boudinage and broken formation; D3, thrusting and folding, indicating transport mostly to the SE; D4, thrusting and folding in the opposite direction; D5, further folding, including sinistral shear; D6, steep faults. The deformation sequence suggests continuous or intermittent southeastward transport of units with increasing sedimentary and structural burial. By phase D3, the rocks had passed from the soft‐sediment state to low levels of consolidation. However, with a compressive strength of ～5 MPa they are weak rocks even today. Such weak‐rock deformation must be important in other sedimentary basins, especially those associated with active convergent plate boundaries and with immature source areas for their sediments.  相似文献   

14.
Base-salt relief influences salt flow, producing three-dimensionally complex strains and multiphase deformation within the salt and its overburden. Understanding how base-salt relief influences salt-related deformation is important to correctly interpret salt basin kinematics and distribution of structural domains, which have important implications to understand the development of key petroleum system elements. The São Paulo Plateau, Santos Basin, Brazil is characterized by a >2 km thick, mechanically layered Aptian salt layer deposited above prominent base-salt relief. We use 3D seismic reflection data, and physical and conceptual kinematic models to investigate how gravity-driven translation above thick salt, underlain by complex base-salt relief, generated a complex framework of salt structures and minibasins. We show that ramp-syncline basins developed above and downdip of the main pre-salt highs record c. 30 km of Late Cretaceous-Paleocene basinward translation. As salt and overburden translated downdip, salt flux variations caused by the base-salt relief resulted in non-uniform motion of the cover, and the simultaneous development of extensional and contractional structures. Contraction preferentially occurred where salt flow locally decelerated, above landward-dipping base-salt and downdip of basinward-dipping ramps. Extension occurred at the top of basinward-dipping ramps and base-salt plateaus, where salt flow locally accelerated. Where the base of the salt layer was broadly flat, structures evolved primarily by load-driven passive diapirism. At the edge of or around smaller base-salt highs, salt structures were affected by plan-view rotation, shearing and divergent flow. The magnitude of translation (c. 30 km) and the style of salt-related deformation observed on the São Paulo Plateau afford an improved kinematic model for the enigmatic Albian Gap, suggesting this structure formed by a combination of basinward salt expulsion and regional extension. These observations contribute to the long-lived debate regarding the mechanisms of salt tectonics on the São Paulo Plateau, ultimately improving our general understanding of the effects of base-salt relief on salt tectonics in other basins.  相似文献   

15.
Quantifying the Cenozoic growth of high topography in the Indo‐Asian collision zone remains challenging, due in part to significant shortening that occurred within Eurasia before collision. A growing body of evidence suggests that regions far removed from the suture zone experienced deformation before and during the early phases of Himalayan orogenesis. In the present‐day north‐eastern Tibetan Plateau, widespread deposits of Cretaceous sediment attest to significant basin formation; however, the tectonic setting of these basins remains enigmatic. We present a study of a regionally extensive network of sedimentary basins that are spatially associated with a system of SE‐vergent thrust faults and are now exposed in the high ranges of the north‐eastern corner of the Tibetan Plateau. We focus on a particularly well‐exposed basin, located ～20 km north of the Kunlun fault in the Anyemaqen Shan. The basin is filled by ～900 m of alluvial sediments that become finer‐grained away from the basin‐bounding fault. Additionally, beds in the proximal footwall of the basin‐bounding fault exhibit progressive, up‐section shallowing and several intraformational unconformities which can be traced into correlative conformities in the distal part of the basin. The observations show sediment accumulated in the basin during fault motion. Regional constraints on the timing of sediment deposition are provided by both fossil assemblages from the Early Cretaceous, and by K–Ar dating of volcanic rocks that floor and cross‐cut sedimentary fill. We argue that during the Cretaceous, the interior NE Tibetan Plateau experienced NW–SE contractional deformation similar to that documented throughout the Qinling–Dabie orogen to the east. The Songpan‐Ganzi terrane apparently marked the southern limit of this deformation, such that it may have been a relatively rigid block in the Tibetan lithosphere, separating regions experiencing deformation north of the convergent Tethyan margin from regions deforming inboard of the east Asian margin.  相似文献   

16.
In this work, we explore by means of analogue models how different basin-bounding fault geometries and thickness of a viscous layer within the otherwise brittle pre-rift sequence influence the deformation and sedimentary patterns of basins related to extension. The experimental device consists of a rigid wooden basement in the footwall to simulate a listric fault. The hangingwall consists of a sequence of pre-rift deposits, including the shallow interlayered viscous layer, and a syn-rift sequence deposited at constant intervals during extension. Two different geometries exist of listric normal faults, dip at 30 and 60° at surface. This imposes different geometries in the hangingwall anticlines and their associated sedimentary basins. A strong contrast exists between models with and without a viscous layer. With a viscous décollement, areas near the main basement fault show a wide normal drag and the hangingwall basin is gently synclinal, with dips in the fault side progressively shallowing upwards. A secondary roll-over structure appears in some of the models. Other structures are: (1) reverse faults dipping steeply towards the main fault, (2) antithetic faults in the footwall, appearing only in models with the 30° dipping fault and silicone-level thicknesses of 1 and 1.5 cm and (3) listric normal faults linked to the termination of the detachment level opposite to the main fault, with significant thickness changes in the syn-tectonic units. The experiments demonstrate the importance of detachment level in conditioning the geometry of extensional sedimentary basins and the possibility of syncline basin geometries associated with a main basement fault. Comparison with several basins with half-graben geometries containing a mid-level décollement supports the experimental results and constrains their interpretation.  相似文献   

17.
Progradation is an important mechanism through which sedimentary systems fill sedimentary basins. Although a general progradational pattern is recognized in many basins, few studies have quantified system scale spatial changes in vertical trends that record fluvial system progradation. Here, we provide an assessment of the spatial distribution of vertical trends across the Salt Wash distributive fluvial system (DFS), in the Morrison Formation SW, USA. The vertical distribution of proximal, medial and distal facies, and channel belt proportion and thickness, are analysed at 25 sections across approximately 80 000 km2 of a DFS that spanned approximately 100 000 km2. The stratigraphic signature of facies stacking patterns that record progradation varies depending on location within the basin. An abrupt and incomplete progradation succession dominates the proximal region, whereby proximal deposits directly overlie distal deposits. A more complete succession is preserved in the medial region of the DFS. The medial to distal region of the DFS are either simple aggradational successions, or display progradation of medial over distal facies. Spatial variations in facies successions patterns reflects preservation changes down the DFS. A spatial change in vertical trends of channel belt thickness and proportion is not observed. Vertical trends in channel belt proportion and thickness are locally highly variable, such that systematic up‐section increases in these properties are observed only at a few select sites. Progradation can only be inferred once local trends are averaged out across the entire succession. Possible key controls on trends are discussed at both allocyclic and autocyclic scales including climate, tectonics, eustasy and avulsion. Eustatic controls are discounted, and it is suggested that progradation of the Salt Wash DFS is driven by upstream controls within the catchment.  相似文献   

18.
In order to evaluate the relationship between thrust loading and sedimentary facies evolution, we analyse the progradation of fluvial coarse‐grained deposits in the retroarc foreland basin system of the northern Andes of Colombia. We compare the observed sedimentary facies distribution with the calculated one‐dimensional (1D) Eocene to Quaternary sediment‐accumulation rates in the Medina wedge‐top basin and with a three‐dimensional (3D) sedimentary budget based on the interpretation of ～1800 km of industry‐style seismic reflection profiles and borehole data. Age constraints are derived from a new chronostratigraphic framework based on extensive fossil palynological assemblages. The sedimentological data from the Medina Basin reveal rapid accumulation of fluvial and lacustrine sediments at rates of up to ～500 m my?1 during the Miocene. Provenance data based on gravel petrography and paleocurrents reveal that these Miocene fluvial systems were sourced from Upper Cretaceous and Paleocene sedimentary units exposed to the west in the Eastern Cordillera. Peak sediment‐accumulation rates in the upper Carbonera Formation and the Guayabo Group occur during episodes of coarse‐grained facies progradation in the early and late Miocene proximal foredeep. We interpret this positive correlation between sediment accumulation and gravel deposition as the direct consequence of thrust activity along the Servitá–Lengupá faults. This contrasts with one class of models relating gravel progradation in more distal portions of foreland basin systems to episodes of tectonic quiescence.  相似文献   

19.
Understanding the relationship between sedimentation and tectonics is critical to the analysis of stratigraphic evolution in foreland basins. Previous models of foreland basins have explained stratal development, but were done generally under the assumption that steady allogenic forcing produces a steady stratigraphic response. They did not consider autogenic shoreline behaviour during the development of the subsidence pattern characteristic of foreland basins. We present a mathematical model and flume experiments that explore how subsidence and sediment‐supply rates control the shoreline trajectory and the stratal patterns that fill foreland basins. Through these models, we found differing autogenic responses in the rate and direction of shoreline migration, and these generated three distinct styles of stratal architecture, despite the constant external forcing (i.e. constant sediment discharge and basin substrate tilting). The first response was ‘autoretreat’, where shoreline migration switched from initial progradation to retrogradation. The second response was progradation followed by constant aggradation of the shoreline. The third response was maintained progradation with a markedly accelerating rate. We termed this latter newly observed autogenic behaviour ‘shoreline autoacceleration’. These three modes of shoreline behaviour and their accompanying stratal architecture provide a basic framework for the relationship between sedimentation and tectonic activity in foreland basins under the simplified conditions presented here.  相似文献   

20.
The China–Mongolia border region contains many late Mesozoic extensional basins that together constitute a regionally extensive basin system. Individual basins within the system are internally composed of a family of sub‐basins filled with relatively thin sedimentary piles mostly less than 5 km in thickness. There are two types of sub‐basins within the basins, failed and combined, respectively. The failed sub‐basins are those that failed to continue developing with time. In contrast, the combined ones are those that succeeded in growing by coalescing adjacent previously isolated sub‐basins. Thus, a combined sub‐basin is bounded by a linked through‐going normal fault that usually displays a corrugated trace on map view and a shallower dip on cross‐section. Along‐strike existence of discrete depocenters and alternation of sedimentary wedges of different types validate the linkage origin of combined sub‐basins. Localized high‐strain extension resulted in large‐amount displacement on linked faults, but contemporaneously brought about the cessation of some isolated fault segments and the formation of corresponding failed sub‐basins in intervening areas between active linked faults. Some combined sub‐basins might have evolved into supradetachment basins through time, concurrent with rapid denudation of footwall rocks and formation of metamorphic core complexes in places. A tectonic scenario of the broad basin system can be envisioned as an evolution from early‐stage distributed isolated sub‐basins to late‐stage focused combined or/and supradetachment sub‐basins bounded by linked faults, accompanied by synchronous cessation of some early‐formed sub‐basins. Initiation of the late Mesozoic extension is believed to result from gravitational collapse of the crust that had been overthickened shortly prior to the extension. Compression, arising from collision of Siberia and the amalgamated North China–Mongolia block along the Mongol–Okhotsk suture in the time interval from the Middle to Late Jurassic, led to significant shortening and thickening over a broad area and subsequent extensional collapse. Pre‐ and syn‐extensional voluminous magmatism must have considerably reduced the viscosity of the overthickened crust, thereby not only facilitating the gravitational collapse but enabling the lower‐middle crust to flow as well. Flow of a thicker crustal layer is assumed to have occurred coevally with upper‐crustal stretching so as to diminish the potential contrast of crustal thickness by repositioning materials from less extended to highly extending regions. Lateral middle‐ and lower‐crustal flow and its resultant upward push upon the upper crust provide a satisfying explanation for a number of unusual phenomena, such as supracrustal activity of the extension, absence or negligibleness of postrift subsidence of the basin system, less reduction of crustal thickness after extension, and non‐compression‐induced basin inversion, all of which have been paradoxical in the previous study of the late Mesozoic basin tectonics in the China–Mongolia border region.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号