共查询到20条相似文献，搜索用时 265 毫秒
1.
Every two-ribbon flare observed during the Skylab period produced an observable coronal transient, provided the flare occurred close enough to the limb. The model presented here treats these two events as a combined process. Transients that occur without flares are believed to involve magnetic fields that are too weak to produce significant chromospheric emission. Adopting the hypothesis that the rising flare loop systems observed during two-ribbon flares are exhibiting magnetic reconnection, a model of a coronal transient is proposed which incorporates this reconnection process as the driving force. When two oppositely directed field lines reconnect a lower loop is created rooted to the solar surface (the flare loop) and an upper disconnected loop is produced which is free to rise. The magnetic flux of these upper loops is proposed as the driver for the transient. The force is produced by the increase in magnetic pressure under the filament and transient.A quantitative model is developed which treats the transient configuration in terms of four distinct parts- the transient itself with its magnetic field and material, the region just below the transient but above the filament, the filament with its magnetic field, and the reconnected flux beneath the filament. Two cases are considered - one in which all the prominence material rises with the transient and one in which the material is allowed to fall out of the transient. The rate of rise of the neutral line during the reconnection process is taken from the observations of the rising X-ray flare loop system during the 29 July, 1973 flare. The MHD equations for the system are reduced to four non-linear ordinary coupled differential equations which are solved using parameters believed to be realistic for solar conditions. The calculated velocity profiles, widths, etc., agree quite well with the observed properties of coronal transients as seen in white light. Since major flares are usually associated with a filament eruption about 10–15 min before the flare and since this model associates the transient with the filament eruption, we suspect that the transient is actually initiated some time before the actual flare itself.The National Center for Atmospheric Research is sponsored by the National Science Foundation. 相似文献
2.
We demonstrate that major asymmetries in erupting filaments and CMEs, namely major twists and non-radial motions are typically related to the larger-scale ambient environment around eruptive events. Our analysis of prominence eruptions observed by the STEREO, SDO, and SOHO spacecraft shows that prominence spines retain, during the initial phases, the thin ribbon-like topology they had prior to the eruption. This topology allows bending, rolling, and twisting during the early phase of the eruption, but not before. The combined ascent and initial bending of the filament ribbon is non-radial in the same general direction as for the enveloping CME. However, the non-radial motion of the filament is greater than that of the CME. In considering the global magnetic environment around CMEs, as approximated by the Potential Field Source Surface (PFSS) model, we find that the non-radial propagation of both erupting filaments and associated CMEs is correlated with the presence of nearby coronal holes, which deflect the erupting plasma and embedded fields. In addition, CME and filament motions, respectively, are guided towards weaker field regions, namely null points existing at different heights in the overlying configuration. Due to the presence of the coronal hole, the large-scale forces acting on the CME may be asymmetric. We find that the CME propagates usually non-radially in the direction of least resistance, which is always away from the coronal hole. We demonstrate these results using both low- and high-latitude examples. 相似文献
3.
A major solar active event called Bastille Day Event occurred in AR 9077 on July 14, 2000. Simultaneous occurrence of a filament
eruption, a flare and a coronal mass ejection was observed in this event. Previous analyses of this event show that before
the event, there existed an activation and eruption of a huge trans-equatorial filament, which might play a crucial role in
triggering the Bastille Day event. This implies that independent flux systems are closely related to and affect each other,
which has encouraged us to investigate the catastrophic behavior of a multiple coronal flux rope system with the use of a
2.5-D time-dependent MHD model. A force-free field that contains three separate coronal flux ropes is taken to be the initial
state. Starting from this state, we increase either the annular or the axial flux of a certain flux rope to examine the catastrophic
behavior of the system in two regimes, the ideal MHD regime and the resistive MHD regime. It is found that a catastrophe occurs
if the flux exceeds a certain critical value, or the magnetic energy of the system exceeds a certain threshold: the rope of
interest breaks away from the base and escapes to infinity, leaving a current sheet below. Moreover, the destiny of the remainder
flux ropes relies on whether reconnection takes place across the current sheet. In the ideal MHD regime, i.e., in the absence of reconnection, these ropes remain to be attached to the base in equilibrium, whereas in the resistive MHD
regime they abruptly erupt upward during reconnection and escape to infinity. Reconnection causes the field lines to close
back to the base and thus changes the background field outside the attached flux ropes in such a way that the constraint on
these ropes is substantially relaxed and the corresponding catastrophic energy threshold is reduced accordingly, leading to
a catastrophic eruption of these ropes. Since magnetic reconnection is generally inevitable when a current sheet forms and
develops through an eruption of one flux rope, the eruption of this flux rope must lead to an eruption of the others. This
provides an example to demonstrate the interaction between several independent magnetic flux systems in different regions,
as implied by the Bastille Day event, and may serve as a possible mechanism for sympathetic events occurring on the Sun. 相似文献
4.
T. Török M. Temmer G. Valori A. M. Veronig L. van Driel-Gesztelyi B. Vršnak 《Solar physics》2013,286(2):453-477
We study a filament eruption, two-ribbon flare, and coronal mass ejection (CME) that occurred in NOAA Active Region 10898 on 6 July 2006. The filament was located South of a strong sunspot that dominated the region. In the evolution leading up to the eruption, and for some time after it, a counter-clockwise rotation of the sunspot of about 30 degrees was observed. We suggest that the rotation triggered the eruption by progressively expanding the magnetic field above the filament. To test this scenario, we study the effect of twisting the initially potential field overlying a pre-existing flux-rope, using three-dimensional zero-β MHD simulations. We first consider a relatively simple and symmetric system, and then study a more complex and asymmetric magnetic configuration, whose photospheric-flux distribution and coronal structure are guided by the observations and a potential field extrapolation. In both cases, we find that the twisting leads to the expansion of the overlying field. As a consequence of the progressively reduced magnetic tension, the flux-rope quasi-statically adapts to the changed environmental field, rising slowly. Once the tension is sufficiently reduced, a distinct second phase of evolution occurs where the flux-rope enters an unstable regime characterised by a strong acceleration. Our simulations thus suggest a new mechanism for the triggering of eruptions in the vicinity of rotating sunspots. 相似文献
5.
Two possible limiting scenarios are proposed for the production of a coronal mass ejection. In the first the magnetic field around a prominence evolves until it loses equilibrium and erupts, which drives reconnection below the prominence and an eruption of the overlying magnetic arcade. In the second a large-scale magnetic arcade evolves until it loses equilibrium and erupts, thereby causing a prominence to erupt. In general it is likely to be the non-equilibrium of the coupled system which creates the eruption. Furthermore, large quiescent prominences are expected to be centred within the magnetic bubble of a coronal mass ejection whereas when active-region prominences erupt they are likely to be located initially to one side of the bubble.A model is set up for the eruption of a magnetically coupled prominence and coronal mass ejection. This represents a development of the Anzer and Pneuman (1982) model by overcoming two limitations of it, namely that: it is not globally stable initially and so one wonders how it can be set up in a stable way before the eruption; it has reconnection driving the CME whereas recent observations suggest that the reverse may be happening. In our model we assume that magnetic reconnection below the prominence is driven by the eruption and the driver is magnetic non-equilibrium in the coupled prominence-mass ejection system. The prominence is modelled as a twisted flux tube and the mass ejection as an overlying void and magnetic bubble. Two different models of the prominence are considered. In one a globally stable equilibrium becomes unstable when a threshold magnetic flux below the prominence is exceeded and, in the other, equilibrium ceases to exist. In both cases, the prominence and mass-ejection accelerate upwards before reaching constant velocities in a manner that is consistent with observations. It is found that the greater the reconnection that is driven by the eruption, the higher is the final speed. 相似文献
6.
Simple models for the MHD eruption of a solar prominence are presented, in which the prominence is treated as a twisted magnetic flux tube that is being repelled from the solar surface by magnetic pressure forces. The effects of different physical assumptions to deal with this magneto-hydrodynamically complex phenomenon are evaluated, such as holding constant the prominence current, radius, flux or twist or modelling the prominence as a current sheet. Including a background magnetic field allows the prominence to be in equilibrium initially with an Inverse Polarity and then to erupt due to magnetic non-equilibrium when the background magnetic field is too small or the prominence twist is too great. The electric field at the neutral point below the prominence rapidly increases to a maximum value and then declines. Including the effect of gravity also allows an equilibrium with Normal Polarity to exist. Finally, an ideal MHD solution is found which incorporates self-consistently a current sheet below the prominence and which implies that a prominence will still erupt and form a current sheet even if no reconnection occurs. When reconnection is allowed it is, therefore, driven by the eruption. 相似文献
7.
We propose a new model for the initiation of solar coronal mass ejections (CMEs) and CME-associated flares. The model is inferred from observations of a quiescent filament eruption in the north-western quadrant of the solar disk on 4 September 2000. The event was observed with the Siberian Solar Radio Telescope (5.7 GHz), the Nobeyama Radioheliograph (17 GHz) and SOHO/EIT and LASCO. Based on the observations, we suggest that the eruption could be caused by the interaction of two dextral filaments. According to our model, these two filaments merge together to form a dual-filament system tending to form a single long filament. This results in a slow upward motion of the dual-filament system. Its upward expansion is prevented by the attachment of the filaments to the photosphere by filament barbs as well as by overlying coronal arcades. The initial upward motion is caused by the backbone magnetic field (first driving factor) which connects the two merging filaments. Its magnetic flux increases slowly due to magnetic reconnection of the cross-interacting legs of these filaments. If a total length of the dual-filament system is large enough, then the filament barbs detach themselves from the solar surface due to magnetic reconnection between the barbs with oppositely directed magnetic fields. The detachment of the filament barbs completes the formation of the eruptive filaments themselves and determines the helicity sign of their magnetic fields. The appearance of a helical magnetic structure creates an additional upward-directed force (second driving factor). A combined action of these two factors causes acceleration of the dual-filament system. If the lifting force of the two factors is sufficient to substantially extend the overlying coronal magnetic arcade, then magnetic reconnection starts below the eruptive filament in accordance with the classical scheme, and the third driving factor comes into play. 相似文献
8.
Adopting the point of view that a coronal transient is a defined magnetic structure, it must be diamagnetic with respect to the external ambient magnetic field, i.e., the external field lines cannot penetrate the structure. If this is so, an integral approach involving only external forces can be very useful for studying the conditions for acceleration and large-scale dynamical behavior of the transient.After a discussion of a suggested transient configuration based upon observations of prominences, flare loops, and transient - filament relative orientations observed by Trottet and MacQueen (1980), we demonstrate the diamagnetic approach to this problem through a particularly simplified model. Necessary conditions for upward acceleration of the transient are discussed in some detail. One such plausible initiation mechanism is shown to be a constriction of the structure near its base by the external forces. This mechanism not only can provide the upward acceleration for the transient but is also compatible with the observation of hot rising flare loops during two-ribbon flare which show evidence for magnetic reconnection.We have studied the equilibrium conditions and dynamical behavior of the transient using this mechanism for two limiting cases - that in which the gas pressure in the structure dominates over the magnetic pressure and that in which the magnetic pressure dominates. For both cases, the required equilibrium conditions are compatible with observed coronal parameters. The dynamical behavior upon inward constriction, however, resembles the observed characteristics for transients best for the magnetically dominated case. For example, in the pressure-dominated case, the required temperatures for acceleration appear somewhat high being in excess of about 1.9 × 106 K. If, in addition, the internal temperature declines adiabatically during the outward motion, the structure does not reach inifinity unless its initial temperature exceeds about 3 × 106 K but stops a some radial distance, returns to the Sun only to be accelerated outward again in the same fashion. The rather stringent requirements on internal temperature for the pressure-dominated case in addition to the expectation that pressure-dominated transients should evolve into a thin pencil shape instead of maintaining an approximately self-similar profile as observed are strong arguments in favor of the magnetically dominated case.Based upon the above results, we suggest that the reconnection process evidenced in two-ribbon flares may not necessarily be the result of the relaxation of a locally open field configuration produced by the transient as described by Kopp and Pneuman (1976) but, instead, that the acceleration of the transient and the two-ribbon flare both may be produced by a common force, namely that provided by the constricting effect of the external magnetic field displaced by the presence of the structure.The National Center for Atmospheric Research is sponsored by the National Science Foundation. 相似文献
9.
We present a theoretical study of the formation of a coronal cavity and its relation to a quiescent prominence. We argue that the formation of a coronal cavity is initiated by the condensation of plasma which is trapped by the coronal magnetic field in a closed streamer and which then flows down to the chromosphere along the field lines due to lack of stable magnetic support against gravity. The existence of a coronal cavity depends on the coronal magnetic field strength; with low strength, the plasma density is not high enough for condensation to occur. Furthermore, we suggest that prominence and cavity material is supplied from the chromospheric level. Whether a coronal cavity and a prominence coexist depends on the magnetic field configuration; a prominence requires stable magnetic support.We initiate the study by considering the stability of condensation modes of a plasma in the coronal streamer model obtained by Steinolfson et al. (1982) using a 2-D, time dependent, ideal MHD computer simulation; they calculated the dynamic interaction between outward flowing solar wind plasma and a global coronal magnetic field. In the final steady state, they found a density enhancement in the closed field region with the enhancement increasing with increasing strength of the magnetic field. Our stability calculation shows that if the density enhancement is higher than a critical value, the plasma is unstable to condensation modes. We describe how, depending on the magnetic field configuration, the condensation may produce a coronal cavity and/or initiate the formation of a prominence.NRC Research Associate. 相似文献
10.
On 5 April 2008, a filament at the periphery of an active region was observed by the Extreme Ultraviolet Imager telescope aboard the STEREO-A spacecraft, which showed up as a prominence eruption in the field-of-view from STEREO-B. The filament at STEREO-A 304 Å was first lengthened toward a region with weak overlying magnetic field so evolved as a large-scale one consisting of bright and dark threads twisting with each other, and then the portion below the weak field underwent an eruption. Meanwhile, the corresponding STEREO-B 304 Å prominence threads exhibited a kinking structure and tilting motion, with its center deflecting from the radial direction. By using three-dimension (3D) reconstruction technology, we obtain the 3D topology for the kinked prominence when its apex arrived at 1.4 radii, from which a clockwise rotation of about 90° is found in the course of the eruption. By comparing the 3D structure with the magnetic-field configuration computed by using the Potential-Field Source-Surface (PFSS) model, it is suggested that the filament erupted against the rather weaker than stronger overlying magnetic field, which make it appear to tilt toward one side. 相似文献
11.
《Chinese Astronomy and Astrophysics》2019,43(3):305-326
The Sun is the celestial body in the sky with the closest relationship with the Earth. The violent eruptive activities happening on the Sun can greatly impact the human living environment and lead to disastrous consequences. It is well accepted that solar eruptions including the solar flare, prominence eruption and coronal mass ejection are the different manifestations of a single physical process powered by the magnetic free energy gradually stored in the corona prior to eruptions. Therefore, mapping the three-dimensional structure of coronal magnetic field is a prerequisite to understand the initiation mechanism of solar eruptions. Due to the technological and methodological difficulties, routine observations of the coronal magnetic field are still unavailable. Therefore, a number of methods have been developed to reconstruct the coronal magnetic field. This paper mainly reviews the applications of various reconstruction methods to the studies of the solar eruptions in the recent ten years. 相似文献
12.
An analysis is made of the Martens-Kuin filament eruption model in relation to observations of coronal mass ejections (CMEs). The field lines of this model are plotted in the vacuum or infinite resistivity approximation with two background fields. The first is the dipole background field of the model and the second is the potential streamer model of Low. The assumption is made that magnetic field evolution dominates compression or other effects which is appropriate for a low- coronal plasma. The Martens-Kuin model predicts that, as the filament erupts, the overlying coronal magnetic field lines rise in a manner inconsistent with observations of CMEs associated with eruptive filaments. Initially, the bright arc of a CME broadens in time much more slowly than the dark cavity between it and the filament, whereas in the model they broaden at the same rate or the bright arc broadens more rapidly than the dark cavity, depending on the background field. Thus, this model and, by generalization the whole class of so-called Kuperus-Raadu configurations in which a neutral point occurs below the filament, are of questionable utility for CME modeling. An alternate case is considered in which the directions of currents in the Martens-Kuin model are reversed resulting in a so-called normal polarity configuration of the filament magnetic field. In this case, a neutral line occurs above the current-carrying filament. The background field lines now distort to support the filament and help eject it. While the vacuum field results make this configuration appear very promising, a full two- or more-dimensional MHD simulation is required to properly analyze the dynamics resulting from this configuration.Presently NRC Senior Research Associate at NOAA, Space Environment Laboratory, Boulder, Colorado, U.S.A.At the NASA National Space Data Center. 相似文献
13.
This article is the third in a series working towards the construction of a realistic, evolving, non-linear force-free coronal-field model for the solar magnetic carpet. Here, we present preliminary results of 3D time-dependent simulations of the small-scale coronal field of the magnetic carpet. Four simulations are considered, each with the same evolving photospheric boundary condition: a 48-hour time series of synthetic magnetograms produced from the model of Meyer et al. (Solar Phys. 272, 29, 2011). Three simulations include a uniform, overlying coronal magnetic field of differing strength, the fourth simulation includes no overlying field. The build-up, storage, and dissipation of magnetic energy within the simulations is studied. In particular, we study their dependence upon the evolution of the photospheric magnetic field and the strength of the overlying coronal field. We also consider where energy is stored and dissipated within the coronal field. The free magnetic energy built up is found to be more than sufficient to power small-scale, transient phenomena such as nanoflares and X-ray bright points, with the bulk of the free energy found to be stored low down, between 0.5?–?0.8 Mm. The energy dissipated is currently found to be too small to account for the heating of the entire quiet-Sun corona. However, the form and location of energy-dissipation regions qualitatively agree with what is observed on small scales on the Sun. Future MHD modelling using the same synthetic magnetograms may lead to a higher energy release. 相似文献
14.
The spectacular prominence eruption and CME of 31 August 2007 are analyzed stereoscopically using data from NASA??s twin Solar Terrestrial Relations Observatory (STEREO) spacecraft. The technique of tie pointing and triangulation (T&T) is used to reconstruct the prominence (or filament when seen on the disk) before and during the eruption. For the first time, a filament barb is reconstructed in three-dimensions, confirming that the barb connects the filament spine to the solar surface. The chirality of the filament system is determined from the barb and magnetogram and confirmed by the skew of the loops of the post-eruptive arcade relative to the polarity reversal boundary below. The T&T analysis shows that the filament rotates as it erupts in the direction expected for a filament system of the given chirality. While the prominence begins to rotate in the slow-rise phase, most of the rotation occurs during the fast-rise phase, after formation of the CME begins. The stereoscopic analysis also allows us to analyze the spatial relationships among various features of the eruption including the pre-eruptive filament, the flare ribbons, the erupting prominence, and the cavity of the coronal mass ejection (CME). We find that erupting prominence strands and the CME have different (non-radial) trajectories; we relate the trajectories to the structure of the coronal magnetic fields. The possible cause of the eruption is also discussed. 相似文献
15.
We study the interaction between an erupting solar filament and a nearby coronal hole, based on multi-viewpoint observations from the Solar Dynamics Observatory and STEREO. During the early evolution of the filament eruption, it exhibits a clockwise rotation that brings its easternmost leg in contact with the oppositely aligned field at the coronal hole boundary. The interaction between the two magnetic-field systems is manifested as the development of a narrow contact layer in which we see enhanced EUV brightening and bi-directional flows, suggesting that the contact layer is a region of strong and ongoing magnetic reconnection. The coronal mass ejection (CME) resulting from this eruption is highly asymmetric, with its southern portion opening up to the upper corona, while the northern portion remains closed and connected to the Sun. We suggest that the erupting flux rope that made up the filament reconnected with both the open and closed fields at the coronal hole boundary via interchange reconnection and closed-field disconnection, respectively, which led to the observed CME configuration. 相似文献
16.
Jiayan Yang Yunchun Jiang Bo Yang Junchao Hong Dan Yang Yi Bi Ruisheng Zheng Haidong Li 《New Astronomy》2012,17(8):732-738
By means of Hα, EUV, soft X-ray, hard X-ray, and photospheric magnetic field observations, we report the surge-like eruption of a small-scale filament, called “blowout surge” according to recent observations, occurring on a plage region around AR 10876 on 1 May 2006. Along magnetic polarity reversal boundaries with obvious magnetic cancelations, the filament was located underneath a compact coronal arcade and close to one end of large coronal loops around the AR’s periphery. The filament started to erupt about 8 min before the main impulsive phase of a small two-ribbon flare, which had two Hα blue-wing kernels connected by hard X-ray loop-top sources on the both sides of the filament. After the flare end, the filament further underwent a distant eruption following a path nearly along the preexisting large loops, and thus looked like an Hα surge and an EUV jet. During the eruption, a small coronal dimming was formed near the flare, while weak brightenings appeared around the remote end of the large loops. We interpret these joint observations as the filament eruption being confined and guided by the large loops. The filament eruption, initially embedded in one footpoint region of the large loops, can break away from the magnetic restraint of the overlying compact arcade, but might be still limited inside the large loops. As a result, the eruption took a surge form that can only expand laterally along the large loops rather than erupt radially. 相似文献
17.
Simultaneous SOHO and Ground-Based Observations of a Large Eruptive Prominence and Coronal Mass Ejection 总被引：1，自引：0，他引：1
Plunkett S.P. Vourlidas A. Šimberová S. Karlický M. Kotrč P. Heinzel P. Kupryakov Yu.A. Guo W.P. Wu S.T. 《Solar physics》2000,194(2):371-391
Coronal mass ejections (CMEs) are frequently associated with erupting prominences near the solar surface. A spectacular eruption of the southern polar crown prominence was observed on 2 June 1998, accompanied by a CME that was well-observed by the LASCO coronagraphs on SOHO. The prominence was observed in its quiescent state and was followed throughout its eruption by the SOHO EIT and later by LASCO as the bright, twisted core of the CME. Ground-based H observations of the prominence were obtained at the Ondejov Observatory in the Czech Republic. A great deal of fine structure was observed within the prominence as it erupted. The prominence motion was found to rotate about its axis as it moved outward. The CME contained a helical structure that is consistent with the ejection of a magnetic flux rope from the Sun. Similar structures have been observed by LASCO in many other CMEs. The relationship of the flux rope to other structures in the CME is often not clear. In this event, the prominence clearly lies near the trailing edge of the structure identified as a flux rope. This structure can be observed from the onset of the CME in the low corona all the way out to the edge of the LASCO field of view. The initiation and evolution of the CME are modeled using a fully self-consistent, 3D axisymmetric, MHD code. 相似文献
18.
Observational conditions for the formation and maintenance of filaments are reviewed since 1989 in the light of recent findings
on their structure, chirality, inferred magnetic topology, and mass flows. Recent observations confirm the necessary conditions
previously cited: (1) their location at a boundary between opposite-polarity magnetic fields (2) a system of overlying coronal
loops, (3) a magnetically-defined channel beneath, (4) the convergence of the opposite-polarity network magnetic fields towards
their common boundary within the channel and (5) cancellation of magnetic flux at the common polarity boundary. Evidence is
put forth for three additional conditions associated with fully developed filaments: (A) field-aligned mass flows parallel
with their fine structure (B) a multi-polar background source of small-scale magnetic fields necessary for the formation of
the filament barbs and (C) a handedness property known as chirality which requires them to be either of two types, dextral
or sinistral. One-to-one relationships have been established between the chirality of filaments and the chirality of their
filament channels and overlying coronal arcades. These findings reinforce earlier evidence that every filament magnetic field
is separate from the magnetic field of the overlying arcade but both are parts of a larger magnetic field system. The larger
system has at least quadrupolar footprints in the photosphere and includes the filament channel and subphotospheric magnetic
fields, This ‘systems’ view of filaments and their environment enables new perspectives on why arcades and channels are invariable
conditions for their existence.
Supplementary material to this paper is available in electronic form at http://dx.doi.org/10.1023/A:1005026814076 相似文献
19.
By using Hα, He I 10830, EUV and soft X-ray (SXR) data, we examined a filament eruption that occurred on a quiet-sun region near the center of the solar disk on 2006 January 12, which disturbed a sigmoid overlying the filament channel observed by the GOES-12 SXR Imager (SXI), and led to the eruption of the sigmoid. The event was associated with a partial halo coronal mass ejection (CME) observed by the Large Angle and Spectrometric Coronagraphs (LASCO) on board the Solar and Heliospheric Observatory (SOHO), and resulted in the formation of two flare-like ribbons, post-eruption coronal loops, and two transient coronal holes (TCHs), but there were no significantly recorded GOES or Hα flares corresponding to the eruption. The two TCHs were dominated by opposite magnetic polarities and were located on the two ends of the eruptive sigmoid. They showed similar locations and shapes in He Ⅰ 10830, EUV and SXR observations. During the early eruption phase, brightenings first appeared on the locations of the two subsequent TCHs, which could be clearly identified on He Ⅰ 10830, EUV and SXR images. This eruption could be explained by the magnetic flux rope model, and the two TCHs were likely to be the feet of the flux rope. 相似文献
20.
We present a case study of two successive filament eruptions at the southeast limb of the Sun observed by Solar Dynamics Observatory (SDO) on 2012 April 19. At the initial stage of the first filament (F1) eruption, one leg of the F1 moved toward the second filament (F2) and swept the F2. The interaction between two filaments occurred. After the leg of the F1 swept the F2, it returned from northeast to southwest following the F1 expansion. During the F1 eruption, the middle of the F1 exhibited an obvious twisted structure. The rising speed of the F1 was 85.6 km/s. The partial material of the F1 fell back to the surface along the other leg of the F1 after the F1 eruption and the falling speed was 311.6 km/s. A CME was observed by SOHO/LASCO after the F1 eruption. One of the bright flare ribbons and the dimming regions formed after the F1 eruption were found to move toward the F2. The propagation speeds of the flare ribbons were 4.7 km/s and 4.1 km/s and the propagation speeds of the dimmings were 3 km/s and 6.3 km/s. The small active region was emerging in the northern flank of the F2. The ejection and the falling plasma in the small active region produced the disturbance to the right part of the F2. When the F1 erupted, the large-scale overlying coronal loops of the F1 were pushed out toward the southeast of the Sun by its expanding. During the F1 eruption, the large-scale overlying coronal loops of the F2 began to open toward the southeast. Following the opening of the large-scale overlying coronal loops, the F2 became instable and began to erupt. The rising speed of the F2 was 300.1 km/s. A two-ribbon flare and a weak CME were formed after the F2 eruption. These observations evidenced that the interaction of two filaments and the opening of the large-scale overlying coronal loops caused by the F1 eruption are the most important reason that led to the F2 eruption. Our observations also support the standard solar flare model. 相似文献