共查询到20条相似文献，搜索用时 46 毫秒
1.
2.
A workflow for simultaneous joint PP‐PS prestack inversion of data from the Schiehallion field on the United Kingdom Continental Shelf is presented and discussed. The main challenge, describing reasonable PS to PP data registration before any prestack or joint PP‐PS inversion, was overcome thanks to a two‐stage process addressing the signal envelope, then working directly on the seismic data to estimate appropriate time‐variant time‐shift volumes. We evaluated the benefits of including PS along with PP prestack seismic data in a joint inversion process to improve the estimated elastic property quality and also to enable estimation of density compared with other prestack and post‐stack inversion approaches. While the estimated acoustic impedance exhibited a similar quality independent of the inversion used (PP post‐stack, PP prestack or joint PP‐PS prestack inversion) the shear impedance estimation was noticeably improved by the joint PP‐PS prestack inversion when compared to the PP prestack inversion. Finally, the density estimated from joint PP and PS prestack data demonstrated an overall good quality, even where not well‐controlled. The main outcome of this study was that despite several data‐related limitations, inverting jointly correctly processed PP and PS data sets brought extra value for reservoir delineation as opposed to PP‐only or post‐stack inversion. 相似文献
3.
PP波和PS波联合反演方法作为有效的地震技术,比单纯纵波反演精度要高,能够提高地震储层识别的精度.以Russell近似理论为基础,推导了新的转换波AVO近似公式,双层模型界面的反射特征数值模拟显示,新公式具有较高的近似精度,且具备直接反演流体因子f、剪切模量μ和密度ρ等参数的优势,有效避免间接反演带来的误差.结合纵横波联合反演理论,提出了基于贝叶斯理论的新型联合反演算法.在实际应用中,对纵波和转换波角道集进行同相轴匹配处理,综合利用纵波和转换波资料携带的信息,实现基于Russell近似的多波联合反演.模型数据和实际资料测试结果表明,反演结果与真实值或测井结果匹配度较高,证实该方法真实有效. 相似文献
4.
针对时移地震差异数据,给出了一种基于贝叶斯理论的AVO波形反演方法.该方法可以利用时移地震差异数据同时反演出纵波阻抗、横波阻抗和密度的变化.利用时移地震资料进行反演,由于采集和处理过程中存在一定的差异,不同年份地震资料在非注采过程影响区域也会存在一定的变化,而该变化会导致反演结果在非注采区域有较大的变化.针对这一问题,本文采用贝叶斯理论框架,将待求的纵横波阻抗、密度变化的先验信息和包含在地震数据中的信息结合起来,对于纵横波阻抗和密度变化,假设其服从Gauss分布,并以时移地震分别反演的结果作为其期望,同时,为了更好地表征储层属性变化,提高分辨率和抑制非注采区域弹性参数的变化,假设弹性参数变化的导数服从改进的Cauchy分布.数值模拟试验和实际资料处理结果皆表明,本文提出的反演方法能够有效地抑制假象,突出储层性质的变化,得到高分辨率的弹性参数变化信息,为研究储层属性的变化和优化开采方案提供更多的有效的信息. 相似文献
5.
纵横波弹性阻抗联立反演在GD地区的应用 总被引：2，自引：0，他引：2
在GD油田复杂油藏描述中应用叠前纵横波弹性阻抗反演,精确地进行了油藏岩性的划分。利用三个或三个以上部分叠加数据,进行纵横波弹性阻抗联立反演,既克服了因叠后地震反演结果单一而不能满足复杂储层描述的需求,又避免了由于叠前道集信噪比低造成反演结果不稳定的缺陷。本文论述了叠前弹性波阻抗反演的基本原理,结合GD地区实际资料,对反演过程中涉及的角道集子波提取、层位标定、横波速度预测、弹性参数提取与解释等关键步骤进行了详细研究,指出基于测井资料分析的多种弹性参数综合解释是提高叠前地震反演应用效果的关键。 相似文献
6.
7.
在界面两侧地层的弹性参数弱反差的假设难以成立的情况下,本文提出用平均入射角道集进行PP波与PS波的联合反演.首先,在PP波与PS波AVA(amplitude versus angle,振幅随入射角变化)道集的基础上,分别选择小入射角范围与大入射角范围的AVA道集进行局部加权叠加,以获得由两个角度组成的平均入射角道集,并作为后续反演的输入数据.然后,再通过最小二乘原理建立了PP波与PS波联合反演目标函数,推导了模型修改量的向量公式,建立了平均入射角道集联合反演的流程.模型数据与实际数据的测试结果表明:在信噪比较低、地层弹性参数反差较大、层厚较薄的情况下,该反演方法的精度在很大程度上超过了基于近似反射系数的反演方法,为复杂油气藏勘探提供了新的思路. 相似文献
8.
弹性参数作为反映岩石弹性性质的参数,在储层预测中具有重要作用.常规弹性参数的构建主要基于PP波地震信息.PP波与PS波地震振幅因其携带的信息不同,对岩性与流体的敏感性也不同.本文提出联合利用PP波与PS波弹性阻抗以及角度信息构建角弹性参数来预测有利储层.首先,对常规PS波弹性阻抗方程进行重新推导,使得PS波弹性阻抗取值的数量级不随角度变化且能够与PP波弹性阻抗具备形式上的匹配;其次,根据常规弹性参数构建公式,采用PP波弹性阻抗、PS波弹性阻抗替代纵波阻抗、横波阻抗,提出角弹性参数的概念及构建公式,从而将角度信息引入到弹性参数的构建中;最后,在PP波与PS波弹性阻抗反演的基础上构建得到对储层敏感性较强的角弹性参数,利用角弹性参数的取值特征预测有利储层.模型与实际资料测试均表明角弹性参数具备较高的储层敏感性. 相似文献
9.
杨氏模量与密度乘积(Eρ)能够突显页岩气储层的异常特征,泊松比能够指示储层的含流体性.与常规叠前弹性参数反演相比,基于Eρ、泊松比和密度的叠前纵横波联合反演可以获得更加精确的弹性参数,为页岩气储层识别和流体预测提供可靠的依据.首先,推导了基于Eρ、泊松比和密度的纵波和转换波反射系数近似方程,利用典型模型对新推导的反射系数方程做精度分析,当入射角小于30°时,新推导的反射系数公式具有较高的精度;其次,充分利用纵波和转换波的信息,在贝叶斯的框架下,建立叠前纵横波联合反演流程,进行Eρ、泊松比和密度的直接反演,避免了间接反演带来的累积误差;最后,利用实际工区井模型数据进行算法测试,结果表明,该反演方法所获得的Eρ、泊松比和密度的估计值与真实值吻合较好,满足精细地震反演的精度要求. 相似文献
10.
在VTI介质中,由于引入了各向异性参数使得多分量多参数地震反演问题的非线性程度显著增加,因此采用传统的权重加权法构建单目标函数进行反演得到的反演结果往往并不理想.本文以反射率法为基础,结合快速非支配排序遗传算法研究了一种VTI介质的多分量叠前联合反演方法.该方法以反射率法为正演方程,应用互相关原理构建PP波和PSV波的多目标函数,进而采用快速非支配排序遗传算法全局寻优获得VTI介质的厚度、纵横波速度、密度和各向异性参数等多个参数.在正演的过程中,反射率法可以考虑几何扩散、吸收衰减、透射损失、多次波以及纵横波旅行时不匹配等地震波传播效应,更能精确地描述地震波在地下地层中的真实传播情况;在反演的过程中,快速非支配排序遗传算法可以在不引入权重系数的条件下同时优化多个目标函数,获得联合反演问题的Pareto最优解,既不添加权重系数影响又充分利用多分量地震数据.模型测试结果验证了该反演方法的有效性和可行性. 相似文献
11.
振幅随偏移距变化(AV0)弹性参数的反演是储层预测的一个重要方法.利用正演技术分析双相介质的地震资料中含有的流体信息,有助于提高AVO弹性参数反演的可靠性.本文应用Russell推出的计算纵波反射系数的AVO线性近似公式,对双相介质的纵波资料中所含有的流体信息进行定量分析,研究从AV0资料的反演中可以确定哪些弹性参数或它们的组合关系.文中考虑的弹性参数有流体因子、剪切模量和密度三者的相对扰动量.在时间城内对反射系数的正演计算公式进行线性化,得到灵敏度矩阵,并用奇异值分解(SVD)计算其特征值和特征向量采分析弹性参数的反演.由计算结果可知,在入射角较小时由AV0资料反演只能得到流体因子和密度两者的相对扰动量;若想同时获得三个参数的相对扰动量,就必须增大入射角. 相似文献
12.
常规声波波阻抗由于缺乏横波的信息,使得它对于流体的变化很不敏感,而弹性波阻抗反演,除了与纵波速度,密度有关之外,还与横波速度、入射角度有关,由于考虑了AVO(Amplitude Variation with Offset)效应,使得对流体和岩性的预测能力增强.本文将弹性波阻抗反演应用于时移地震中,采用AVA(Amplitude Variation with Angle)约束稀疏脉冲反演来进行弹性波阻抗反演,得到纵横波阻抗等弹性参数,通过交会图分析,将弹性参数转换为油藏参数,如预测含水饱和度的变化,通过本方法可增强对储层流体的预测,提高储层管理能力. 相似文献
13.
储层弹性与物性参数可直接应用于储层岩性预测和流体识别,是储层综合评价和油气藏精细描述的基本要素之一.现有的储层弹性与物性参数地震同步反演方法大都基于Gassmann方程,使用地震叠前数据,通过随机优化方法反演储层弹性与物性参数;或基于Wyllie方程,使用地震叠后数据,通过确定性优化方法反演储层弹性与物性参数.本文提出一种基于Gassmann方程、通过确定性优化方法开展储层弹性和物性参数地震叠前反演的方法,该方法利用Gassmann方程建立储层物性参数与叠前地震观测数据之间的联系,在贝叶斯反演框架下以储层弹性与物性参数的联合后验概率为目标函数,通过将目标函数的梯度用泰勒公式展开得到储层弹性与物性参数联合的方程组,其中储层弹性参数对物性参数的梯度用差分形式表示,最后通过共轭梯度算法迭代求解得到储层弹性与物性参数的最优解.理论试算与实际资料反演结果证明了方法的可行性. 相似文献
14.
多分量勘探相比常规纵波勘探而言有许多的优势,PP/PS联合AVO分析和反演是强而有效的储层识别方法。在本文中,我们推导了更精确的转换波AVO反射系数公式;并在入射角小于30度时进行了进一步简化,其对于转换波AVO分析和反演而言更加简单有效。基于该近似,我们进行了PP/PS联合AVO反演。实际资料的实例表明,反演得到的纵横波速度比可很好地识别岩性及油气。反演得到的流体因子和泊松比等其他属性在储层处也显示出明显异常,效果显著。 相似文献
15.
The elastic reverse time migration approach based on the vector-wavefield decomposition generally uses the scalar product imaging condition to image the multicomponent seismic data. However, the resulting images contain the crosstalk artefacts and the polarity reversal problems, which are caused by the nonphysical wave modes and the angle-dependent reduction of image amplitudes, respectively. To overcome these two problems, we develop an amplitude-preserving elastic reverse time migration approach based on the vector-decomposed P- and S-wave seismic records. This approach includes two key points. The first is that we employ the vector-decomposed P- and S-wave multicomponent records to independently reconstruct the PP and PS reflection images to mitigate the crosstalk artefacts. The second is that we propose two schemes in addressing the issue of polarity reversal problem in the conventional PP image. One solution is to adopt the angle-dependent equation. Another one is to reconstruct an amplitude-preserving PP image with a separated scalar P-wave particle velocity, which has a clear physical meaning. Numerical examples using two-dimensional and three-dimensional models demonstrate that the proposed elastic reverse time migration approach can provide the images with better amplitude-preserving performance and fewer crosstalk artefacts, compared with the conventional elastic reverse time migration approach based on the scalar product imaging condition. 相似文献
16.
Knowledge about saturation and pressure distributions in a reservoir can help in determining an optimal drainage pattern, and in deciding on optimal well designs to reduce risks of blow‐outs and damage to production equipment. By analyzing time‐lapse PP AVO or time‐lapse multicomponent seismic data, it is possible to separate the effects of production related saturation and pressure changes on seismic data. To be able to utilize information about saturation and pressure distributions in reservoir model building and simulation, information about uncertainty in the estimates is useful. In this paper we present a method to estimate changes in saturation and pressure from time‐lapse multicomponent seismic data using a Bayesian estimation technique. Results of the estimations will be probability density functions (pdfs), giving immediate information about both parameter values and uncertainties. Linearized rock physical models are linked to the changes in saturation and pressure in the prior probability distribution. The relationship between the elastic parameters and the measured seismic data is described in the likelihood model. By assuming Gaussian distributed prior uncertainties the posterior distribution of the saturation and pressure changes can be calculated analytically. Results from tests on synthetic seismic data show that this method produces more precise estimates of changes in effective pressure than a similar methodology based on only PP AVO time‐lapse seismic data. This indicates that additional information about S‐waves obtained from converted‐wave seismic data is useful for obtaining reliable information about the pressure change distribution. 相似文献
17.
The technique of amplitude variation with offset or angle (AVO or AVA) can be used to extract fluid and lithology information from prestack seismic data. Based on three-term AVO equations, three elastic parameters can be inverted for by linear AVO inversion. However, many theoretical and numerical studies have demonstrated that by using offset limited data, a three-term AVO inversion may have problems of instability and inaccuracy while inverting for the density term. We have searched for an elastic parameter that contains density information and inverted this parameter in a more stable manner using offset limited data. First, we test the sensitivity of elastic parameters to hydrocarbon reservoirs and select the optimal fluid factor (ρf) that contains density information and has an excellent performance as an inversion parameter used to detect hydrocarbons. Then, we derive approximate PP and PS reflection coefficient equations in terms of the fluid factor. The derived equations allow us to directly estimate the fluid factor of the reservoir. Finally, we apply these equations to synthetic data by employing a joint AVO inversion technique. The results show that the method is stable and unambiguous. 相似文献
18.
Elastic redatuming can be carried out before or after decomposition of the multicomponent data into independent PP, PS, SP, and SS responses. We argue that from a practical point of view, elastic redatuming is preferably applied after decomposition. We review forward and inverse extrapolation of decomposed P- and S-wavefields. We use the forward extrapolation operators to derive a model of discrete multicomponent seismic data. This forward model is fully described in terms of matrix manipulations. By applying these matrix manipulations in reverse order we arrive at an elastic processing scheme for multicomponent data in which elastic redatuming plays an essential role. Finally, we illustrate elastic redatuming with a controlled 2D example, consisting of simulated multicomponent seismic data. 相似文献
19.
叠前地震反演技术能够将地震中振幅、偏移距和入射角等多种有效信息与油气的敏感参数结合起来,在有效识别油气藏"甜点"方面虽发挥了重要的作用,但对于煤层气的有效预测仍需研究.针对煤层气与石油天然气的赋存地质条件不同,本文以山西沁水盆地煤层气地震资料为例,借鉴叠前地震反演技术的多参数预测思想,通过模型正演和实测资料处理,得到纵波、横波速度和密度等不同的数据体,利用数据体和弹性参数关系式,采用AkiRichard近似公式与叠前宽角度反演联合的方法,寻找出富含煤层气储层的敏感参数.从而实现富含煤层气储层的有效预测.经与测井曲线结果对比,吻合率较高,说明了该方法具有可行性与实用性. 相似文献
20.
Time-lapse seismic data is useful for identifying fluid movement and pressure and saturation changes in a petroleum reservoir and for monitoring of CO2 injection. The focus of this paper is estimation of time-lapse changes with uncertainty quantification using full-waveform inversion. The purpose of also estimating the uncertainty in the inverted parameters is to be able to use the inverted seismic data quantitatively for updating reservoir models with ensemble-based methods. We perform Bayesian inversion of seismic waveform data in the frequency domain by combining an iterated extended Kalman filter with an explicit representation of the sensitivity matrix in terms of Green functions (acoustic approximation). Using this method, we test different strategies for inversion of the time-lapse seismic data with uncertainty. We compare the results from a sequential strategy (making a prior from the monitor survey using the inverted baseline survey) with a double difference strategy (inverting the difference between the monitor and baseline data). We apply the methods to a subset of the Marmousi2 P-velocity model. Both strategies performed well and relatively good estimates of the monitor velocities and the time-lapse differences were obtained. For the estimated time-lapse differences, the double difference strategy gave the lowest errors. 相似文献