首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 562 毫秒
1.
A Hybrid Fuzzy Weights-of-Evidence Model for Mineral Potential Mapping   总被引：1，自引：0，他引：1  
This paper describes a hybrid fuzzy weights-of-evidence (WofE) model for mineral potential mapping that generates fuzzy predictor patterns based on (a) knowledge-based fuzzy membership values and (b) data-based conditional probabilities. The fuzzy membership values are calculated using a knowledge-driven logistic membership function, which provides a framework for treating systemic uncertainty and also facilitates the use of multiclass predictor maps in the modeling procedure. The fuzzy predictor patterns are combined using Bayes’ rule in a log-linear form (under an assumption of conditional independence) to update the prior probability of target deposit-type occurrence in every unique combination of predictor patterns. The hybrid fuzzy WofE model is applied to a regional-scale mapping of base-metal deposit potential in the south-central part of the Aravalli metallogenic province (western India). The output map of fuzzy posterior probabilities of base-metal deposit occurrence is classified subsequently to delineate zones with high-favorability, moderate favorability, and low-favorability for occurrence of base-metal deposits. An analysis of the favorability map indicates (a) significant improvement of probability of base-metal deposit occurrence in the high-favorability and moderate-favorability zones and (b) significant deterioration of probability of base-metal deposit occurrence in the low-favorability zones. The results demonstrate usefulness of the hybrid fuzzy WofE model in representation and in integration of evidential features to map relative potential for mineral deposit occurrence.  相似文献   

2.
In this study, we propose, describe, and demonstrate a new geovisualization tool to demonstrate the use of exploratory and interactive visualization techniques for a visual fuzzy classification of remotely sensed imagery. The proposed tool uses dynamically linked views, consisting of an image display, a parallel coordinate plot, a 3D feature space plot, and a classified map with an uncertainty map. It allows a geoscientist to interact with the parameters of a fuzzy classification algorithm by visually adjusting fuzzy membership functions and fuzzy transition zones of land-cover classes. The purpose of this tool is to improve insight into fuzzy classification of remotely sensed imagery and related uncertainty. We tested our tool with a visual fuzzy land-cover classification of a Landsat 7 ETM+ image of an area in southern France characterized by objects with indeterminate boundaries. Good results were obtained with the visual classifier. Additionally, a focus-group user test of the tool showed that insight into a fuzzy classification algorithm and classification uncertainty improved considerably.  相似文献   

3.
基于场所的GIS直接表达人类地理空间知识的管理和加工过程,而不确定性是人类智能的基本特点,因此GIS的智能化需要研究其中的不确定性问题。与传统的GIS相比,基于场所的GIS中的不确定性问题更为丰富,既包括随机性,也包括含糊性,而不确定性的主体既可以是地理要素、场所和空间关系,也包括命题和规则。该文介绍该领域相关的研究成果,基于不确定性主体、类型、表达手段及相关的活动4个视角,建立了基于场所的GIS中所涉及的不确定性框架,从而为相关的不确定性建模提供指导。  相似文献   

4.
This article applies error propagation in a Monte Carlo simulation for a spatial-based fuzzy logic multi-criteria evaluation (MCE) in order to investigate the output uncertainty created by the input data sets and model structure. Six scenarios for quantifying uncertainty are reviewed. Three scenarios are progressively more complex in defining observational data (attribute uncertainty); while three other scenarios include uncertainty in observational data (position of boundaries between map units), weighting of evidence (fuzzy membership assignment), and evaluating changes in the MCE model (fuzzy logic operators). A case study of petroleum exploration in northern South America is used. Despite the resources and time required, the best estimate of input uncertainty is that based on expert-defined values. Uncertainties for fuzzy membership assignment and boundary transition zones do not affect the results as much as the attribute assignment uncertainty. The MCE fuzzy logic operator uncertainty affects the results the most. Confidence levels of 95% and 60% are evaluated with threshold values of 0.7 and 0.5 and show that accepting more uncertainty in the results increases the total area available for decision-making. Threshold values and confidence levels should be predetermined, although a series of combinations may yield the best decision-making support.  相似文献   

5.
The degree of uncertainty of many geographical objects has long been known to be in intimate relation with the scale of its observation and representation. Yet, the explicit consideration of scaling operations when modeling uncertainty is rarely found. In this study, a neural network‐based data model was investigated for representing geographical objects with scale‐induced indeterminate boundaries. Two types of neural units, combined with two types of activation function, comprise the processing core of the model, where the activation function can model either hard or soft transition zones. The construction of complex fuzzy regions, as well as lines and points, is discussed and illustrated with examples. It is shown how the level of detail that is apparent in the boundary at a given scale can be controlled through the degree of smoothness of each activation function. Several issues about the practical implementation of the model are discussed and indications on how to perform complex overlay operations of fuzzy maps provided. The model was illustrated through an example of representing multi‐resolution, sub‐pixel maps that are typically derived from remote sensing techniques.  相似文献   

6.
Categorical spatial data, such as land use classes and socioeconomic statistics data, are important data sources in geographical information science (GIS). The investigation of spatial patterns implied in these data can benefit many aspects of GIS research, such as classification of spatial data, spatial data mining, and spatial uncertainty modeling. However, the discrete nature of categorical data limits the application of traditional kriging methods widely used in Gaussian random fields. In this article, we present a new probabilistic method for modeling the posterior probability of class occurrence at any target location in space-given known class labels at source data locations within a neighborhood around that prediction location. In the proposed method, transition probabilities rather than indicator covariances or variograms are used as measures of spatial structure and the conditional or posterior (multi-point) probability is approximated by a weighted combination of preposterior (two-point) transition probabilities, while accounting for spatial interdependencies often ignored by existing approaches. In addition, the connections of the proposed method with probabilistic graphical models (Bayesian networks) and weights of evidence method are also discussed. The advantages of this new proposed approach are analyzed and highlighted through a case study involving the generation of spatial patterns via sequential indicator simulation.  相似文献   

7.
Abstract

Polygon boundaries on thematic maps are conventionally considered to be sharp lines representing abrupt changes of phenomena. However, in reality changes of environmental phenomena may also be partial or gradual. Indiscriminate use of sharp lines to represent different types of change creates a problem of boundary inaccuracy. Specifically, in the context of vector-based GIS, use of sharp lines to represent gradual or partial changes may cause misunderstanding of geographical information and reduce analysis accuracy.

In this paper, the expressive inadequacy of the conventional vector boundary representation is examined. A more informative technique—the fuzzy representation of geographical boundaries—is proposed, in which boundaries describe not only the location but also the rate of change of environmental phenomena. Four methods of determining fuzzy boundary membership grades from different kinds of geographical data are described. An example of applying the fuzzy boundary technique to data analysis is presented and the advantages of the technique are discussed.  相似文献   

8.
基于植被分区的秦岭年降水分区验证及其年际变化   总被引：1，自引：0，他引：1  
毛明策  蔡新玲  高茂盛 《地理研究》2020,39(12):2833-2841
通过旋转经验正交分解方法对秦岭年降水量进行分区,比较秦岭降水量客观分区与植被南北分界线的一致性,运用滑动t检验、累积距平和小波方法分析了各分区的气候变化特征。主要结论为：秦岭区域可以按年降水量分为4个区域,其中秦岭中段南北分区与植被分区界线相近,走向相同;秦岭各分区多年降水量一致表现为减少趋势,近57年来,各区大约减少了一成左右的降水量;秦岭区域年降水量在近57年里发生了多次转折,最明显的转折期发生在20世纪80年代,2001年前后秦岭区域降水出现了波动增加的趋势,但增加的趋势强度还比较弱,难以达到20世纪80年代的丰水顶峰时期;秦岭各分区最显著震荡周期2~4年。建议在开展气候区划和气候变化研究时,应该考虑年降水量分区与植被自然分区的一致性。  相似文献   

9.
A new method is illustrated for describing the characteristics of urban pattern changes over different time periods. This method employs vector geometry, paired centroids, shared boundary lines, and overlain polygons. Three new statistics are proposed for characterizing local polygon feature changes in quantity, shape, and size. These statistics are standardized, based on conventional theories from urban geography such as directional concentric zones and user‐designated corridors to document both regional and global patterns of land‐use change. This method is used to analyse land‐use changes in metropolitan Detroit between 1990 and 2000. The Detroit case study indicates that the CTSPA statistics are effective in describing urban spatial pattern changes and in characterizing the evolution of discrete urban landscapes over selected periods.  相似文献   

10.
姚永慧  寇志翔  胡宇凡  张百平 《地理学报》2020,75(11):2298-2306
秦岭不仅是中国南北的地理分界线,也是中国亚热带和暖温带的气候分界线,在中国地理生态格局中占有重要的地位和作用。由于过渡带的复杂性、过渡性和异质性以及划分指标、研究目的的不同,学术界关于这一南北地理—生态分界线的具体位置一直有争论。为了进一步揭示秦巴山区过渡带的特征,明确中国南北地理—生态分界线的位置,本文选择马尾松（Pinus massoniana）林和油松（Pinus tabulaeformis）林这两类分别代表中国南方亚热带针叶林和北方温带针叶林的植被,结合研究区SRTM地形数据、气温和降水数据等,以年降水、最冷月（1月）气温、最热月（7月）气温和年均温为气候指标,详细分析了这两类植被在秦巴山区的空间分布及二者分界线处的气候条件。结果表明：① 马尾松林和油松林的分界线及相应位置的气候指标可以作为亚热带与暖温带界线划分的植被—气候指标之一。秦巴山区亚热带针叶林（马尾松林）与温带针叶林（油松林）的分界线位于伏牛山南坡至汉中盆地北缘一线（秦岭南坡）海拔1000~1200 m处;分界线处气候指标稳定：年降水750~1000 mm,年均温12~14 ℃,最冷月气温0~4 ℃,最热月气温22~26 ℃。② 通过综合的植被—气候指标来划分秦巴山区亚热带和暖温带的界线,能更科学地确定气候带分界线的位置及过渡带的特征,更全面地反映地表植被—气候格局的变化。此外,秦巴山区亚热带与暖温带的界线应该是由亚热带与暖温带针叶林分界线、阔叶林分界线、灌丛分界线等组成的一个过渡带。本文的研究结果为亚热带与暖温带划分指标的选取提供了一定的科学依据。  相似文献   

11.
Agronomic soil management and decision-making frequently requires the joint classification of soil variables. Fuzzy set theory is often used to accomplish this task. This paper addresses the issues of objectively defining fuzzy membership functions (FMF) and reducing classification uncertainty with hedge operators. As an example, soil in North-east Thailand was classified according to its inherent potential to support the recovery of a rice crop after a drought spell. The utility of auxiliary information not directly included in the classification was explored. A tree cover density index was employed for an objective definition of the FMF to classify soil organic matter content and plant-available potassium. Mapping units were allocated to classes having low, medium or high availability of these plant nutrients. It was shown that crisp, Boolean style classifications severely misclassify land in all but one class. Adjusted FMF decreased the uncertainty contained in thematic class maps. Single FMF values for soil organic matter and plant-available K were then jointly modelled and the soil classified as having low, medium and high potential for rice plants to recover from drought impacts. The very and more or less hedge operators were applied to increase or decrease the joint FMF values using farmer' knowledge about soil fertility. Overall classification uncertainty using FMF was decreased by 14% if the standard FMF was adjusted and the generated membership values were hedged. It was shown that adjusting FMF influenced the uncertainty components vagueness and ambiguity differently; the former increased slightly but the latter was drastically reduced.  相似文献   

12.
A hypothesis for the seismogenesis of a double seismic zone   总被引：1，自引：0，他引：1  
The seismogenesis of a double seismic zone, in particular the lower layer of a double seismic zone, has not been adequately explained in the literature. On the basis of seismic data and geothermal structures along three well-studied cross-sections in the Kuril-Kamchatka and Japan subduction zones, we investigate the temperature/pressure conditions associated with seismogenic structures of the double seismic zones. the corresponding T/P loci seem to suggest that earthquakes observed in the lower layer and in the lower part (below approximately 130 ± 20 km) of the top layer of a double seismic zone were caused by metastable phase transition-a mechanism similar to that responsible for deep-focus earthquakes only at lower temperature/pressure conditions. Under this hypothesis, the wedge-shaped configuration of a double seismic zone is interpreted to represent the loci of the kinetic boundary of the phase transition. According to theoretical/experimental studies and the constraints imposed by our observations, a likely candidate for such a phase transition is the metastable Al-rich enstatite decomposing into the assemblage of Al-poor enstatite plus garnet. Earthquakes in the upper part of the top layer were most probably due to conventional mechanisms such as dehydration of subducted materials and/or facies change from basalt to eclogite. That the top layer involves more than one seismogenic mechanism is also implied by the distinct behaviour of seismicity in the vicinity of 130 ± 20 km. Because the presence of deviatoric stress is critical to the reaction rate of a metastable phase transition, it is inferred that single seismic zones are also caused by the same mechanisms, except that the implicit layer of a supposed double seismic zone is missing, due to the insufficient amount of appropriate metastable minerals or to the lack of appropriate deviatoric stresses in the source region.  相似文献   

13.
In spatial data sets, gaps or overlaps among features are frequently found in spatial tessellations due to the non-abutting edges with adjacent features. These non-abutting edges in loose tessellations are also called inconsistent boundaries or slivers; polygons containing at least one inconsistent boundary are called inconsistent polygons or sliver polygons. The existing algorithms to solve topological inconsistencies in sliver polygons suffer from one or more of three major issues, namely determination of tolerances, excessive CPU processing time for large data sets and loss of vertex history. In this article, we introduce a new algorithm that mitigates these three issues. Our algorithm efficiently searches the features with inconsistent polygons in a given spatial data set and logically partitions them among adjacent features. The proposed algorithm employs the constrained Delaunay triangulation technique to generate labelled triangles from which inconsistent polygons with gaps and overlaps are identified using label counts. These inconsistent polygons are then partitioned using the straight skeleton method. Moreover, each of these partitioned gaps or overlaps is distributed among the adjacent features to improve the topological consistency of the spatial data sets. We experimentally verified our algorithm using the real land cadastre data set. The comparison results show that the proposed algorithm is four times faster than the existing algorithm for data sets with 200,000 edges.  相似文献   

14.
本文选择蒙古中部地区的两个模型多边形对植被多样性进行调查研究。它们都位于干旱、半干旱少雨地区。基于Landsat TM影像,本文研究了多边形区域的NDVI随时间变化的多时相NDVI值制图,得到所选择的具备不同值NDVI区域的全尺度景观特征。这一特征在对耐旱环境组的植被分析中得到了证实。该过程中将近整个实验多边形区域的植被偏离得到了追踪。NDVI的时间分布分析呈现出数值的降低,这说明了在戈壁,稀疏植被存在耐旱趋势。在半干旱气候区域中偏离植被趋势与牧草地的重载负直接相关。  相似文献   

15.
Safety zones are areas where firefighters can retreat to in order to avoid bodily harm when threatened by burnover or entrapment from wildland fire. At present, safety zones are primarily designated by firefighting personnel as part of daily fire management activities. Though critical to safety zone assessment, the effectiveness of this approach is inherently limited by the individual firefighter’s or crew boss’s ability to accurately and consistently interpret vegetation conditions, topography, and spatial characteristics of potential safety zones (e.g. area and geometry of a forest clearing). In order to facilitate the safety zone identification and characterization process, this study introduces a new metric for safety zone evaluation: the Safe Separation Distance Score (SSDS). The SSDS is a numerical representation of the relative suitability of a given area as a safety zone according to its size, geometry, and surrounding vegetation height. This paper describes an algorithm for calculating pixel-based and polygon-based SSDS from lidar data. SSDS is calculated for every potential safety zone within a lidar dataset covering Tahoe National Forest, California, USA. A total of 2367 potential safety zones with an SSDS ≥1 were mapped, representing areas that are suitable for fires burning in low wind and low slope conditions. The highest SSDS calculated within the study area was 9.65, a score that represents suitability in the highest wind-steepest slope conditions. Potential safety zones were clustered in space, with areas in the northern and eastern portions of the National Forest containing an abundance of safety zones while areas to the south and west were completely devoid of them. SSDS can be calculated for potential safety zones in advance of firefighting, and can allow firefighters to carefully compare and select safety zones based on their location, terrain, and wind conditions. This technique shows promise as a standard method for objectively identifying and ranking safety zones on a spatial basis.  相似文献   

16.
Cellular automata (CA) have emerged as a primary tool for urban growth modeling due to its simplicity, transparency, and ease of implementation. Sensitivity analysis is an important component in CA modeling for a better understanding of errors or uncertainties and their propagation. Most studies on sensitivity analyses in urban CA modeling focus on specific component such as neighborhood configuration or stochastic perturbation. However, sensitivity analysis of transition rules, which is one of the core components in CA models, has not been systematically done. This article proposes a systematic sensitivity analysis of major operational components in urban CA modeling using a stepwise comparison approach. After obtaining transition rules, three stages (i.e. static calibration of transition rules, dynamic evolution with varied time steps, and incorporation with stochastic perturbation) are designed to facilitate a comprehensive analysis. This scheme implemented with a case study in Guangzhou City (China) reveals that gaps in performance from static calibration with different transition rules can be reduced when dynamic evolution is considered. Moreover, the degree of stochastic perturbation is closely related to obtain urban morphology. However, a more realistic (i.e. fragmented) urban landscape is achieved at the cost of decreasing pixel-based accuracy in this study. Thus, a trade-off between pixel-based and pattern-based comparisons should be balanced in practical urban modeling. Finally, experimental results illustrate that models for transition rules extraction with good quality can do an assistance for urban modeling through reducing errors and uncertainty range. Additionally, ensemble methods can feasibly improve the performance of CA models when coupled with nonparametric models (i.e. classification and regression tree).  相似文献   

17.
城市三维地理信息系统中三维模型的快速构建方法   总被引：2，自引：1，他引：2  
大规模三维模型的快速构建一直是影响城市三维地理信息系统(3DUGIS)发展的一个重要因素.基于3DUGIS中景观模型的表达原则与分类,分别针对抽象的点、线、面状对象提出符号匹配和三角剖分的批量三维模型构建方法.这种建模方法方便、快捷、自动化程度高,可广泛应用于城市景观中地面、河流、道路、绿地、规则建筑物、地下管线等地物的三维建模.通过对上述三维模型快速构建方法的实现,验证了三维模型生成的效果和效率.  相似文献   

18.
  相似文献   

19.
In Val di Fassa (Dolomites, Eastern Italian Alps) rockfalls constitute the most significant gravity-induced natural disaster that threatens both the inhabitants of the valley, who are few, and the thousands of tourists who populate the area in summer and winter.To assess rockfall susceptibility, we developed an integrated statistical and physically-based approach that aimed to predict both the susceptibility to onset and the probability that rockfalls will attain specific reaches. Through field checks and multi-temporal aerial photo-interpretation, we prepared a detailed inventory of both rockfall source areas and associated scree-slope deposits. Using an innovative technique based on GIS tools and a 3D rockfall simulation code, grid cells pertaining to the rockfall source-area polygons were classified as active or inactive, based on the state of activity of the associated scree-slope deposits. The simulation code allows one to link each source grid cell with scree deposit polygons by calculating the trajectory of each simulated launch of blocks. By means of discriminant analysis, we then identified the mix of environmental variables that best identifies grid cells with low or high susceptibility to rockfalls. Among these variables, structural setting, land use, and morphology were the most important factors that led to the initiation of rockfalls.We developed 3D simulation models of the runout distance, intensity and frequency of rockfalls, whose source grid cells corresponded either to the geomorphologically-defined source polygons (geomorphological scenario) or to study area grid cells with slope angle greater than an empirically-defined value of 37° (empirical scenario). For each scenario, we assigned to the source grid cells an either fixed or variable onset susceptibility; the latter was derived from the discriminant model group (active/inactive) membership probabilities.Comparison of these four models indicates that the geomorphological scenario with variable onset susceptibility appears to be the most realistic model. Nevertheless, political and legal issues seem to guide local administrators, who tend to select the more conservative empirically-based scenario as a land-planning tool.  相似文献   

20.
Summary The thermomechanical differential equations governing deformation in viscous shear zones have been solved for both constant velocity and constant stress boundary conditions. The solutions show that the inertial term in these equations can be neglected everywhere.
The starting condition of the constant velocity model has been shown to be a constant velocity gradient and not a Heaviside function. The temperature anomaly produced by shear heating at the centre of the shear zone is shown to increase gradually and continuously with time, not reaching an asymptotic value. Conclusions for the constant velocity boundary condition are otherwise generally similar to those presented by Yuen et al , and agree with Fleitout & Froidevaux. The temperatures reached by constant velocity shears are sufficient for partial melting.
Constant stress boundary condition shear zone models show an initially broad shear zone with uniform shear velocity gradient. Depending on the level of applied shear stress and ambient temperature, localized intense shear heating may develop followed by thermal runaway. At lower ambient temperatures relatively high stresses are required to produce thermal runaway.
The broadening of the constant velocity shear zone proceeds more rapidly with increased ambient temperature. This can be used to show that shear zones broaden with depth. The merging of parallel shear zone pairs has been investigated and shear zones separated by distances of less than 10km coalesce to form a single shear zone within 3 Myr. Only shear zones separated by 50km or more remain distinct over periods of tens of millions of years.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号