共查询到20条相似文献，搜索用时 515 毫秒
1.
George L. Heritage David J. Milan Andrew R.G. Large Ian C. Fuller 《Geomorphology》2009,112(3-4):334-344
Accurate characterisation of morphology is critical to many studies in the field of geomorphology, particularly those dealing with changes over time. Digital elevation models (DEMs) are commonly used to represent morphology in three dimensions. The quality of the DEM is largely a function of the accuracy of individual survey points, field survey strategy, and the method of interpolation. Recommendations concerning field survey strategy and appropriate methods of interpolation are currently lacking. Furthermore, the majority of studies to date consider error to be uniform across a surface. This study quantifies survey strategy and interpolation error for a gravel bar on the River Nent, Blagill, Cumbria, UK. Five sampling strategies were compared: (i) cross section; (ii) bar outline only; (iii) bar and chute outline; (iv) bar and chute outline with spot heights; and (v) aerial LiDAR equivalent, derived from degraded terrestrial laser scan (TLS) data. Digital Elevation Models were then produced using five different common interpolation algorithms. Each resultant DEM was differentiated from a terrestrial laser scan of the gravel bar surface in order to define the spatial distribution of vertical and volumetric error. Overall triangulation with linear interpolation (TIN) or point kriging appeared to provide the best interpolators for the bar surface. Lowest error on average was found for the simulated aerial LiDAR survey strategy, regardless of interpolation technique. However, comparably low errors were also found for the bar-chute-spot sampling strategy when TINs or point kriging was used as the interpolator. The magnitude of the errors between survey strategy exceeded those found between interpolation technique for a specific survey strategy. Strong relationships between local surface topographic variation (as defined by the standard deviation of vertical elevations in a 0.2-m diameter moving window), and DEM errors were also found, with much greater errors found at slope breaks such as bank edges. A series of curves are presented that demonstrate these relationships for each interpolation and survey strategy. The simulated aerial LiDAR data set displayed the lowest errors across the flatter surfaces; however, sharp slope breaks are better modelled by the morphologically based survey strategy. The curves presented have general application to spatially distributed data of river beds and may be applied to standard deviation grids to predict spatial error within a surface, depending upon sampling strategy and interpolation algorithm. 相似文献
2.
癌症已成为危害全球居民健康的重大民生问题,选取合适的空间插值方法分析小区域癌症数据的空间特征可对区域性癌症防控工作的有效开展提供依据。本研究以湖南省苏仙区2012和2016年以村为单位的肺癌死亡率数据为研究对象,以平均误差和均方根误差为评价指标,对反距离加权（IDW）、普通克里金（OK）、趋势面分析（TSA）、多元线性回归（MLR）与协同克里金（CK）五种典型空间插值方法进行精度效果对比及参数优选,并结合不同插值方法的优缺点,确定癌症数据的最优插值方法。结果表明：插值精度方面,CK法的均方根误差最小、插值精度最高,OK、IDW（幂值=1）和MLR次之,TSA（阶数=5）最低;插值效果方面,五种插值方法的实测值和预测值均显著相关,除CK外,其它四种方法均对死亡率低估程度较大,CK和OK插值结果的空间分布效果更好。同时考虑空间因素和影响因子的CK方法是小区域苏仙区2012年、2016年肺癌死亡率最优插值方法,应用该方法可对区域性癌症防控工作的有效开展提供最优的技术支撑。本论文的研究思路也可为小区域癌症数据空间插值方法及参数优选提供参考。 相似文献
3.
C. H. Grohmann S. S. Steiner 《International journal of geographical information science》2013,27(8):895-906
The shuttle radar topography mission (SRTM), was flow on the space shuttle Endeavour in February 2000, with the objective of acquiring a digital elevation model of all land between 60° north latitude and 56° south latitude, using interferometric synthetic aperture radar (InSAR) techniques. The SRTM data are distributed at horizontal resolution of 1 arc‐second (～30 m) for areas within the USA and at 3 arc‐second (～90 m) resolution for the rest of the world. A resolution of 90 m can be considered suitable for the small or medium‐scale analysis, but it is too coarse for more detailed purposes. One alternative is to interpolate the SRTM data at a finer resolution; it will not increase the level of detail of the original digital elevation model (DEM), but it will lead to a surface where there is the coherence of angular properties (i.e. slope, aspect) between neighbouring pixels, which is an important characteristic when dealing with terrain analysis. This work intents to show how the proper adjustment of variogram and kriging parameters, namely the nugget effect and the maximum distance within which values are used in interpolation, can be set to achieve quality results on resampling SRTM data from 3” to 1”. We present for a test area in western USA, which includes different adjustment schemes (changes in nugget effect value and in the interpolation radius) and comparisons with the original 1” model of the area, with the national elevation dataset (NED) DEMs, and with other interpolation methods (splines and inverse distance weighted (IDW)). The basic concepts for using kriging to resample terrain data are: (i) working only with the immediate neighbourhood of the predicted point, due to the high spatial correlation of the topographic surface and omnidirectional behaviour of variogram in short distances; (ii) adding a very small random variation to the coordinates of the points prior to interpolation, to avoid punctual artifacts generated by predicted points with the same location than original data points and; (iii) using a small value of nugget effect, to avoid smoothing that can obliterate terrain features. Drainages derived from the surfaces interpolated by kriging and by splines have a good agreement with streams derived from the 1” NED, with correct identification of watersheds, even though a few differences occur in the positions of some rivers in flat areas. Although the 1” surfaces resampled by kriging and splines are very similar, we consider the results produced by kriging as superior, since the spline‐interpolated surface still presented some noise and linear artifacts, which were removed by kriging. 相似文献
4.
日照百分率作为研究日照时数及太阳辐射等的重要因素之一,其模拟结果的好坏,直接关系到相关领域的研究应用。而高精度曲面建模方法（HASM）是近几年发展起来的用于生态建模的高精度曲面模拟方法。首先对现有的HASM进行改进,给出建立在完整理论基础之上、精度更高的曲面建模方法,并记为HASM.MOD;以高斯合成曲面为数值试验对象,验证HASM与HASM.MOD的模拟精度;最后,根据全国1951-2010 年752 个气象站点的月平均日照百分率数据,运用HASM.MOD研究近60 年月平均日照百分率的分布状况,同时比较了HASM.MOD、HASM、Kriging 和IDW法的插值精度。数值试验和实例验证结果表明,HASM.MOD的模拟精度最高。用该方法所提供的日照百分率数据可作为基础地理数据供相关研究应用。 相似文献
5.
活动断层的位置分布及其地表变形变位特征的准确识别是研究和评价活动断层的基础,国内外学者利用数字高程模型(DEM)对断层提取进行了大量研究。本文基于DEM的活动断层位置的提取方法进行综述,总结了DEM提取断层位置的地貌形态特征分析、图像处理以及综合处理提取方法,突出介绍了高分辨率DEM在详细的断层位置分布提取中的优势,DEM在断层地表变形变位及其特征参数提取研究中的最新应用进展。随着高分辨率DEM的快速发展,DEM及其空间分析技术已成为一种常见的地学研究方法,将其与野外调查、遥感、测年等技术结合进行综合分析,能够促进对活动断层的深入研究,并成为断层定量化研究强有力的技术手段。 相似文献
6.
Natural Resources Research - In most NI-43-101 resource assessment reports the prediction of global in situ resources is performed by either inverse distance weighting, ordinary kriging (OK) or... 相似文献
7.
Steve W. Lyon Rasmus S⊘rensen Johan Stendahl Jan Seibert 《International journal of geographical information science》2013,27(5):723-740
Interpolation of point measurements using geostatistical techniques such as kriging can be used to estimate values at non-sampled locations in space. Traditional geostatistics are based on the spatial autocorrelation concept that nearby things are more related than distant things. In this study, additional information was used to modify the traditional Euclidean concept of distance into an adjusted distance metric that incorporates similarity in terms of quantifiable landscape characteristics such as topography or land use. This new approach was tested by interpolating soil moisture content, pH and carbon-to-nitrogen (C:N) ratio measured in both the mineral and the organic soil layers at a field site in central Sweden. Semivariograms were created using both the traditional distance metrics and the proposed adjusted distance metrics to carry out ordinary kriging (OK) interpolations between sampling points. In addition, kriging with external drift (KED) was used to interpolate soil properties to evaluate the ability of the adjusted distance metric to incorporate secondary data into interpolations. The new adjusted distance metric typically lowered the nugget associated with the semivariogram, thereby better representing small-scale variability in the measured data compared to semivariograms based on the traditional distance metric. The pattern of the resulting kriging interpolations using KED and OK based on the adjusted distance metric were similar because they represented secondary data and, thus, enhanced small-scale variability compared to traditional distance OK. This created interpolations that agreed better with what is expected for the real-world spatial variation of the measured properties. Based on cross-validation error, OK interpolations using the adjusted distance metric better fit observed data than either OK interpolations using traditional distance or KED. 相似文献
8.
High accuracy surface modeling(HASM) is a method which can be applied to soil property interpolation.In this paper,we present a method of HASM combined geographic information for soil property interpolation(HASM-SP) to improve the accuracy.Based on soil types,land use types and parent rocks,HASM-SP was applied to interpolate soil available P,Li,pH,alkali-hydrolyzable N,total K and Cr in a typical red soil hilly region.To evaluate the performance of HASM-SP,we compared its performance with that of ordinary kriging(OK),ordinary kriging combined geographic information(OK-Geo) and stratified kriging(SK).The results showed that the methods combined with geographic information including HASM-SP and OK-Geo obtained a lower estimation bias.HASM-SP also showed less MAEs and RMSEs when it was compared with the other three methods(OK-Geo,OK and SK).Much more details were presented in the HASM-SP maps for soil properties due to the combination of different types of geographic information which gave abrupt boundary for the spatial varia-tion of soil properties.Therefore,HASM-SP can not only reduce prediction errors but also can be accordant with the distribution of geographic information,which make the spatial simula-tion of soil property more reasonable.HASM-SP has not only enriched the theory of high accuracy surface modeling of soil property,but also provided a scientific method for the ap-plication in resource management and environment planning. 相似文献
9.
中国土壤温度的空间插值方法比较 总被引：15，自引：1，他引：14
利用中国698个气象站点1971~2000年的地面气候资料,采用三种不同方法预测中国0cm、20cm和40cm深度年均土壤温度的空间分布,其中普通克里格和泛克里格法直接以年均土壤温度数据为源数据、回归克里格法以中国年均气温数据和中国DEM数据为源数据进行预测。预测结果的准确性通过平均绝对误差(MAE)和均方根误差(RMSE)值来评价。结果表明回归克里格法预测的MAE值和RMSE值均为最小,说明其预测结果的准确性最好、预测的极端误差也最小;其次为泛克里格法;普通克里格法预测的效果最差。回归克里格法预测结果由于采用了中国DEM数据进行修正,在空间特征表达方面能够更好地表达复杂地形地区的局部变异,其平滑效应明显小于泛克里格法和普通克里格法的预测结果。 相似文献
10.
Classifying airborne LiDAR point clouds via deep features learned by a multi-scale convolutional neural network 总被引：1，自引：0，他引：1
Ruibin Zhao Jidong Wang 《International journal of geographical information science》2018,32(5):960-979
Point cloud classification plays a critical role in many applications of airborne light detection and ranging (LiDAR) data. In this paper, we present a deep feature-based method for accurately classifying multiple ground objects from airborne LiDAR point clouds. With several selected attributes of LiDAR point clouds, our method first creates a group of multi-scale contextual images for each point in the data using interpolation. Taking the contextual images as inputs, a multi-scale convolutional neural network (MCNN) is then designed and trained to learn the deep features of LiDAR points across various scales. A softmax regression classifier (SRC) is finally employed to generate classification results of the data with a combination of the deep features learned from various scales. Compared with most of traditional classification methods, which often require users to manually define a group of complex discriminant rules or extract a set of classification features, the proposed method has the ability to automatically learn the deep features and generate more accurate classification results. The performance of our method is evaluated qualitatively and quantitatively using the International Society for Photogrammetry and Remote Sensing benchmark dataset, and the experimental results indicate that our method can effectively distinguish eight types of ground objects, including low vegetation, impervious surface, car, fence/hedge, roof, facade, shrub and tree, and achieves a higher accuracy than other existing methods. 相似文献
11.
Shuqiang Xue Jiping Liu Jinzhong Mi Chun Dong Yingyan Cheng 《International journal of geographical information science》2016,30(11):2155-2170
The calculation of surface area is meaningful for a variety of space-filling phenomena, e.g., the packing of plants or animals within an area of land. With Digital Elevation Model (DEM) data we can calculate the surface area by using a continuous surface model, such as by the Triangulated Irregular Network (TIN). However, just as the triangle-based surface area discussed in this paper, the surface area is generally biased because it is a nonlinear mapping about the DEM data which contain measurement errors. To reduce the bias in the surface area, we propose a second-order bias correction by applying nonlinear error propagation to the triangle-based surface area. This process reveals that the random errors in the DEM data result in a bias in the triangle-based surface area while the systematic errors in the DEM data can be reduced by using the height differences. The bias is theoretically given by a probability integral which can be approximated by numerical approaches including the numerical integral and the Monte Carlo method; but these approaches need a theoretical distribution assumption about the DEM measurement errors, and have a very high computational cost. In most cases, we only have variance information on the measurement errors; thus, a bias estimation based on nonlinear error propagation is proposed. Based on the second-order bias estimation proposed, the variance of the surface area can be improved immediately by removing the bias from the original variance estimation. The main results are verified by the Monte Carlo method and by the numerical integral. They show that an unbiased surface area can be obtained by removing the proposed bias estimation from the triangle-based surface area originally calculated from the DEM data. 相似文献
12.
The detailed topographic information contained in light detection and ranging (LiDAR) digital elevation models (DEMs) can present significant challenges for modelling surface drainage patterns. These data frequently represent anthropogenic infrastructure, such as road embankments and drainage ditches. While LiDAR DEMs can improve estimates of catchment boundaries and surface flow paths, modelling efforts are often confounded difficulties associated with incomplete representation of infrastructure. The inability of DEMs to represent embankment underpasses (e.g. bridges, culverts) and the problems with existing automated techniques for dealing with these problems can lead to unsatisfactory results. This is often dealt with by manually modifying LiDAR DEMs to incorporate the effects of embankment underpasses. This paper presents a new DEM pre-processing algorithm for removing the artefact dams created by infrastructure in sites of embankment underpasses as well as enforcing flow along drainage ditches. The application of the new algorithm to a large LiDAR DEM of a site in Southwestern Ontario, Canada, demonstrated that the least-cost breaching method used by the algorithm could reliably enforce drainage pathways while minimizing the impact to the original DEM. 相似文献
13.
It can be challenging to accurately determine the topography of physically complex landscapes in remote areas. Ground-based surveys can be difficult, time consuming and may miss significant elements of the landscape. This study compares digital elevation models (DEMs) generated from three different data sources, of the physically complex Narran Lakes Ecosystem, a major floodplain wetland ecosystem in Australia. Topographic surfaces were generated from an airborne laser altimetry (LiDAR) survey, a ground-based differential GPS (DGPS) survey containing more than 20,000 points, and the 9″ DEM of Australia. The LiDAR- and DGPS-derived data generated a more thorough DEM than the 9″ DEM; however, LiDAR generated a surface topography that yielded significantly more detail than the DGPS survey, with no noticeable loss of elevational accuracy. Both the LiDAR- and the DGPS-derived DEMs compute the overall surface area and volume of the largest floodplain lake within the system to within 1% of each other. LiDAR is shown to be a highly accurate and robust technique for acquiring large quantities of topographic data, even in locations that are unsuitable for ground surveying and where the overall landscape is of exceptionally low relief. The results of this study highlight the potential for LiDAR surveys in the accurate determination of the topography of floodplain wetlands. These data can form an important component of water resource management decisions, particularly where environmental water allocations for these important ecosystems need to be determined. 相似文献
14.
We developed a method for high-accuracy surface modeling (HASM) in terms of the fundamental theorem of surfaces, which has theoretically found a solution for error problems. However, the computing speed of HASM was too slow to be widely applied in practice. Thus, adjustment computation of HASM (HASM-AC) is developed in this article. For comparatively testing HASM-AC accuracy, a mathematical surface is first selected so that the true value is able to be predetermined to avoid uncontrollable data errors. The numerical test indicates that HASM-AC has the highest accuracy and its accuracy is 20.67, 15.67, and 14.67 times higher than the inverse distance weighting (IDW), kriging, and spline, respectively. Then, a 0.4 km × 0.5 km rectangular area is used to test the effects of different spatial resolutions and sampling intervals on accuracy. This real-world test demonstrates that HASM-AC accuracy increases at a much better and stable pace as the spatial resolution becomes finer and sampling intervals get shorter, compared to the classic methods. Finally, the computing speed is tested in an area with 6000 × 6000 grid cells where Qinghai, Gansu, and Sichuan provinces meet. The computing speed of HASM-AC is 11, 8, and 563 times faster than IDW, spline, and kriging, respectively, which makes HASM-AC able to process data in a huge size and make real-time visualization realizable. In short, HASM-AC performs best in both the numerical and real-world tests. 相似文献
15.
基于GIS的新疆气温数据栅格化方法研究 总被引：1，自引：1，他引：0
以新疆99个气象台站1971-2010年年平均气温为数据源,采用多元回归结合空间插值的方法对新疆区域气温数据进行栅格化研究。建立了年平均气温与台站经纬度和海拔高度的多元回归模型,对于残差数据的插值采用了反距离权重法(IDW) 、普通克立格法 (Kriging)和样条函数法(Spline)3种目前应用广泛的空间插值方法,针对于这3种方法进行了基于MAE和RMSIE的交叉验证和对比分析,结果表明在新疆的年平均气温的GIS插值方案中,IDW方法精度总体要高于其他两种插值方法。 相似文献
16.
de Souza Luis Eduardo Costa João Felipe C. L. Koppe Jair C. 《Natural Resources Research》2004,13(1):1-15
For many decades the mining industry regarded resources/reserves estimation and classification as a mere calculation requiring basic mathematical and geological knowledge. Most methods were based on geometrical procedures and spatial data distribution. Therefore, uncertainty associated with tonnages and grades either were ignored or mishandled, although various mining codes require a measure of confidence in the values reported. Traditional methods fail in reporting the level of confidence in the quantities and grades. Conversely, kriging is known to provide the best estimate and its associated variance. Among kriging methods, Ordinary Kriging (OK) probably is the most widely used one for mineral resource/reserve estimation, mainly because of its robustness and its facility in uncertainty assessment by using the kriging variance. It also is known that OK variance is unable to recognize local data variability, an important issue when heterogeneous mineral deposits with higher and poorer grade zones are being evaluated. Altenatively, stochastic simulation are used to build local or global uncertainty about a geological attribute respecting its statistical moments. This study investigates methods capable of incorporating uncertainty to the estimates of resources and reserves via OK and sequential gaussian and sequential indicator simulation The results showed that for the type of mineralization studied all methods classified the tonnages similarly. The methods are illustrated using an exploration drill hole data sets from a large Brazilian coal deposit. 相似文献
17.
18.
从机载LiDAR点云数据中分离地面点与非地面点生成城区DEM,是构建数字城市的首要工作。该文对机载LiDAR数据处理中的滤波关键算法进行了研究。首先,利用常用的区域增长方法对机载LiDAR点云数据进行了滤波处理,然后基于正交多项式分带滤波方法进行了点云滤波,比较了两种算法的运行效率,分析了二者的特点,并通过试验对比进行了阈值参数优选,试验表明该算法具有较好的滤波效果,在平原城区的数字城市三维建模中具有很好的应用价值。 相似文献
19.
Ordinary kriging (OK) has been used widely for ore-reserve estimation because of its superior characteristics in relation to other methods. One of these characteristics is related to the quantification of uncertainty by the kriging variance. However, the kriging variance does not recognize local data variability, which is an important issue in the process of ore-reserve estimation, when heterogeneous mineral deposits with richer and poorer parts are being evaluated. This paper proposes the use of interpolation variance as a reliable measure of local data variability and, therefore, adequate for ore-reserve classification. With a reliable measurement of data variability, local confidence can be calculated using the classical confidence interval around an estimate. Errors derived from local confidence then are used to assign classes according to a degree of certainty within some confidence level. Comparative tests using both OK variance and interpolation variance are carried out using exploration data from Chapada Copper Deposit, State of Goiás, Brazil. Results show that the interpolation variance provides a better way to measure uncertainty and consequently to classify reserves. 相似文献
20.
A fault scarp in an urban area identified by LiDAR survey: A Case study on the Itoigawa–Shizuoka Tectonic Line, central Japan 总被引：2，自引：2，他引：0
A light detection and ranging (LiDAR) survey was conducted in a densely built-up area to generate a high-resolution digital elevation model (DEM) to look for active faults. The urban district of Matsumoto City in central Japan is located in a 3-km2 basin along the Itoigawa–Shizuoka Tectonic Line active fault system, one of Japanese onshore fault systems with the highest earthquake probability. A high-resolution DEM at a 0.5-m-grid interval was obtained after removing the effects of laser returns from buildings, clouds and vegetation. It revealed a continuous scarp, up to ~ 2 m in height. Borehole data and archaeological studies indicate the scarp was formed during the most recent faulting event associated with historical earthquakes. In addition, the fault scarp strongly supports that the urban district is in a pull-apart basin related to a fault step-over between two left-lateral strike-slip faults. Consequently, accurate interpretation of fault geometry is crucial to provide estimates of future surface deformation and to allow modeling of basin structure and strong ground motion. Thus, the LiDAR mapping survey in urban districts is effective for detailed active fault mapping in order to constrain basin structure and to forecast the exact location of surface rupturing associated with large earthquakes. 相似文献