共查询到19条相似文献，搜索用时 203 毫秒
1.
更新世以来南黄海陆架具有构造活动性强、沉积厚度大(100~300m)、褶皱变形保存完整等特点,是研究未固结沉积物中褶皱变形的理想“实验室”.高分辨率单道地震剖面揭示了南黄海陆架沉积物中具有不同几何形态的三种褶皱:(1)断层相关褶皱(包括断层扩展褶皱和断层牵引褶皱);(2)横向弯曲褶皱;(3)复合作用褶皱.对褶皱的成因和几何形态的研究表明,控制未固结沉积物中褶皱形成的因素是基底断层及其形成的断块,而不是区域应力场.大量孔隙水可能对沉积物的几何形变具有重要的影响作用.沉积物中断层扩展褶皱和牵引褶皱在形变程度上具有连续性,说明两者在成因上存在联系.断层扩展褶皱可能引发的地震活动和变形带在海洋工程地质评估中应受到重视. 相似文献
2.
《海洋地质与第四纪地质》2017,(2)
为确定南海西部的中—西沙地块是否存在前新生代地层与构造,对研究区内多道反射地震剖面资料进行了地层-构造解释,并结合围区钻井、拖网等岩石地层资料,在研究区北部发现了前新生代地层-构造变形形迹。运用回剥法、去断层恢复法和地质反序法对前新生代地层的构造变形进行了古恢复。结果表明,研究区的地层可划分为上、中、下三套构造层,其中属于前新生界的下构造层可见褶皱、逆冲等挤压构造样式,前新生代末期,其构造形态表现为一系列连续的宽缓褶皱,结合断层逆冲推覆方向可判断其主要挤压应力来自于东南方向,并推测该挤压作用与古南海的扩张有关。 相似文献
3.
《海洋地质与第四纪地质》2010,(3)
北礁凹陷作为琼东南盆地南部深水区的一个典型半地堑凹陷,层序地层具有明显的膝折变形特征,几何学分析显示出伸展断层转折褶皱模型特点。经过对凹陷内部构造变形的测量和推算,本文确定了北礁凹陷断层转折褶皱的构造几何学特征及其运动学过程,揭示了凹陷主要裂谷阶段的水平伸展量,其总的伸展量可达到12 km,平均伸展速率约为0.44 km/Ma。通过构造几何学方法推测始新世末期该区域海平面上升了约200 m。并运用伸展断层转折褶皱理论,按照平衡剖面原理,正演了北礁凹陷及北礁低隆起的伸展构造发育过程。 相似文献
4.
深水褶皱冲断带是目前全球油气勘探的重要领域,其构造变形和油气地质特征是勘探研究的主要内容。通过对不同地区深水褶皱冲断带的地震剖面解释和综合分析,结合沉积特征对其构造样式、变形特征和石油地质特征进行了研究。研究表明,在主动大陆边缘和被动大陆边缘存在4种不同构造样式的深水褶皱冲断带,即:主动大陆边缘型深水褶皱冲断带;被动大陆边缘背景下的泥岩滑脱型、盐岩滑脱型和重力垮塌滑动型深水褶皱冲断带。由于他们具有不同的驱动机制、构造特征和演化特征,导致了其含油气性差别较大。主动大陆边缘背景下发育的深水褶皱冲断带主要发育倾向陆地的逆冲断层、叠瓦构造以及相关的褶皱构造,缺乏有效的烃源岩和储层。被动大陆边缘背景下发育的深水褶皱冲断带可以划分为伸展区、过渡区和挤压区3部分,并发育相关构造,其中泥岩滑脱型和盐岩滑脱型深水褶皱冲断带已经有大量的油气发现。 相似文献
5.
在复杂断块地区,地震成像受断层的影响,断层下盘同相轴出现“上拉”、“下拉”或者同相轴错断的现象,极大地影响了断层圈闭构造高点的确定以及圈闭幅度的准确判断。开展针对复杂断层的高精度速度建模和高精度成像技术被认为是解决断层阴影区成像的主要处理技术解决方案。立足于地震采集信号自身的属性信息,充分挖掘地震信号的潜力,提出广角反射的折射线性去噪技术、中低频有效信号提取技术和优势信号精细速度建模技术,在西湖TT区目标评价中取得了良好的效果,明显减低了断层阴影对目标构造形态的影响,提高了构造圈闭定位的准确性。应用结果表明：通过准确的PSDM速度模型结合断层阴影区优势信号的提取,获得更聚焦的反射能量,断层阴影区弱振幅区得到消除,有效改善了断裂阴影区的成像效果。 相似文献
6.
选取了断层的产状、断层力学性质、断层断面曲率、断面压力、最大主应力与断层走向夹角、断层两盘岩性配置关系和断层沿走向形态等8个评价因子,构建了断层封闭性评价模型。在不同的平面位置、不同的剖面深度半定量评价了研究区与4个主要局部构造相关的9条目标断层现今时期封闭能力。评价结果显示,从断层封闭性角度来优选,W10-1构造和W10-3构造最佳,W9构造中等,W10-2构造次之。 相似文献
7.
生长断层是在伸展和走滑盆地中一种重要且广泛存在的构造样式。通过地震资料定性识别出东海陆架盆地南部地区18条生长断层;根据断裂对研究区各级构造单元控制作用和纵向切穿地层情况,将其划分为一级控盆断裂、二级控凹断裂、三级控带断裂和盖层断裂;通过断裂平面分布特征研究认为研究区的断裂以NE、NNE延伸为主,少数为NEE方向;利用地震剖面在研究区识别出阶梯状组合断层带、“Y”字型组合断层、多米诺式断层带、地堑、地垒等多种断裂组合样式;又结合生长指数和断层落差两种方法对研究区生长断层的运动学特征进行了定量统计分析,发现研究区生长断层在古近纪时期活动强度具有自西向东逐渐递减趋势,区内断层活动期次自西向东逐渐变新,整个研究区内生长断层在古近纪盆地裂陷—断陷期活动强度最大,中新世后断裂活动趋于稳定。认为晚中生代以来太平洋板块西缘俯冲后撤和印度板块向亚欧板块俯冲碰撞在东海陆架盆地形成的远程蠕散效应,使东海陆架盆地形成了拉张伸展应力场环境,是研究区发育大量生长断层的首要原因。同时,加强对研究区生长断层伴生构造如滚动背斜和缓坡带阶梯状断裂组合封堵形成的岩性圈闭研究,有利于推动东海陆架中新生代盆地资源勘探可持续发展。 相似文献
8.
9.
平衡剖面技术广泛应用于构造解释合理性检验和构造演化史分析。平衡剖面发展历史与现状表明,二维平衡剖面技术理论与应用已趋于成熟,真三维平衡恢复算法的精确实现和实际应用是今后的主要发展方向。在详细总结二维平衡剖面技术原理和制作过程后,以苏北盆地溱潼凹陷为例,紧密结合区域地质与地球物理资料、选择合理的剖面走向、采用变速时深转换,多次修改地震构造解释方案并最终制作平衡剖面。结果表明,合理运用平衡剖面技术可检验地震构造解释的合理性并分析构造演化历史,指导油气资源勘探。 相似文献
10.
印支运动为现今渤海海域构造格局的形成奠定了基础,导致渤海海域内部发育3个主要逆冲带。渤海基底内部的先存断层与滑脱层在此过程中可能起到了极为重要的作用,但其如何影响渤海海域印支期的构造变形与分带特征的机制尚不清楚。为了解决上述问题,本文基于地震剖面数据,结合二维热力学数值模拟代码LaMEM对渤海海域印支期的构造变形展开了详细研究。模拟结果揭示,在先存断层存在的条件下,当基底内部无滑脱层或未呈阶梯式在渤海海域分布时,渤海海域内部不会形成相应的逆冲中心;而当基底内部的滑脱层呈阶梯状分布在渤海海域西南部、渤中坳陷以及辽东坳陷3个区域时,应力通过滑脱层在基底内部进行传导,使海域形成了3个逆冲中心,并导致渤海内部大规模的逆冲断层与褶皱变形的发育,与地震剖面具有较好的一致性。数值模拟实验结果证实,基底内部的先存断层与滑脱层是控制渤海海域构造分带性及构造变形特征的重要因素。同时,多逆冲中心演化模式也为解释现今龙门山和四川盆地的形成与演化过程提供了重要的借鉴。 相似文献
11.
The investigation of complex geological setting is still dominated by traditional geo-data collection and analytical techniques, e.g., stratigraphic logging, dip data measurements, structural ground mapping, seismic interpretation, balance section restoration, forward modelling, etc. Despite the advantages of improving our understanding in structural geometry and fault architecture, the geospatial modelling, applying computer-aided three-dimensional geometric design, visualization and interpretation, has rarely been applied to such complex geological setting. This study used the Lenghu fold-and-thrust belt (in Qaidam basin, NE Tibetan Plateau) to demonstrate that the application of geospatial and geomechanical modelling could improve our understanding and provide an effective technique for investigating the fault architecture and strain distribution. The three-dimensional configuration of the Lenghu fold-and-thrust belt was initially derived from traditional analysis techniques, such as regional stratigraphic logging, cross section construction, meso-scale ground mapping and landsat image interpretation. The high-resolution field data and landsat image were integrated to construct the geospatial model, which was subsequently used to quantitatively investigate the fault throw changes along the Lenghu thrust fault zone and to understand its control on the lateral structural variation. The geospatial model was then restored in three dimensions to reveal the kinematic evolution of the Lenghu fold-and-thrust belt. Geomechanical modelling, using a Mass-Spring algorithm, provided an effective three-dimensional tool for structural strain analysis, which was used to predict the strain distribution throughout the overall structure, e.g., normal faults with throws ranging from meters to tens of meters in the hanging-wall. The strain distribution predicted by geomechanical modelling was then validated by the natural normal faults in the hanging-wall. The high accordance between the strain prediction and statistics of natural normal faults demonstrates good applicability of geospatial and geomechanical modelling in the complex geological setting of the Lenghu fold-and-thrust belt. The geospatial models and geomechanical models, therefore, can provide a robust technique for analyzing and interpreting multi-source data within a three-dimensional environment. We anticipate that the application of three-dimensional geospatial modelling and geomechanical modelling, integrating both multi-source geologic data and three-dimensional analytical techniques, can provide an effective workflow for investigating the fault architecture and strain distribution at different scales (e.g., ranging from regional-to meso-scale). 相似文献
12.
We run a series of analogue models to study the effect of stratigraphic heterogeneities of an evaporite formation on thin-skinned deformation of the Southeastern Pyrenean Basin (SPB; NE Spain). This basin is characterized by the existence of evaporites, deposited during the Early-Middle Eocene with lateral variations in thickness and lithological composition. These evaporites are distributed in three lithostratigraphic units, known as Serrat Evaporites, Vallfogona and Beuda Gypsum formations and acted as décollement levels, during compressional deformation in the Lutetian. In addition to analogue modeling, we have used field data, detailed geological mapping and key cross-sections supported by seismic and well data to build a new structural interpretation for the SPB. In this interpretation, it is recognized that the basal and upper parts of the Serrat Evaporites acted as the main décollement levels of the so-called Cadí thrust sheet and Serrat unit. A balanced restoration of the basin indicates that thrust faults nucleated at the stratigraphic transition of the Serrat Evaporites (zone with lateral variations of thickness and lithological composition), characterized by a wedge of anhydrite and shale. The analogue models were setup based on information extracted from cross-sections, built in two sectors with different lithology and stratigraphy of the evaporites, and the restored section of the SPB. In these models, deformation preferentially concentrated in areas where thickness change, defined by wedges of the ductile materials, was inbuilt. Based on the structural interpretation and model results, a kinematic evolution of the SPB is proposed. The kinematic model is characterized by the generation of out-of-sequence structures developed due to lateral stratigraphic variations of the Serrat Evaporites. The present work shows a good example of the role of stratigraphic heterogeneities of an evaporite formation which acts as décollement level on structural deformation in a fold-thrust belt. The results of this work have implications for hydrocarbon exploration and are relevant for studying structural geometry and mechanics in shortened evaporite basins. 相似文献
13.
三维可视化技术在地震资料解释中的应用 总被引：13，自引：0，他引：13
介绍了三维可视化技术基本原理和流程的基础上 ,着重研究了其在地震资料解释中的应用。它主要包含 2方面 :一是可对三维地震数据体直接进行构造解释、实现空间域的层位自动追踪和断层的空间组合 ,解决复杂断块的构造问题 ;二是可进行储层描述 ,即可在一定时窗内或解释层之间进行岩性分析和沉积环境解释。以胜利油田探区为例 ,通过对 CG2 0复杂断块潜山进行精细的构造解释 ,及对 CJZ凸起和北坡的上第三系馆陶组—明化镇组河流相砂体和下第三系东营组三角洲相砂体的储层描述 ,说明三维可视化技术已在构造解释和储层描述中起到了不可替代的作用。 相似文献
14.
地震解释中,标定、地震解释属性提取时时窗的选取、断裂解释都存在一些主观的不确定性。针对这些问题,模拟实际地震资料的视主频和频宽,采用雷克正子波,进行了正演研究。研究表明：剖面上厚层泥岩／厚层砂岩组合方式、砂层的顶界正对着波峰,这时要获得更多砂岩的信息,提取属性选择时窗应该在波峰下取时窗;大套泥岩中的5m砂和10na砂提取属性选择时窗应该在波峰以下取时窗;大套泥中的15m砂岩、20m砂岩和25m砂岩应以波峰对称来开时窗;剖面上厚层砂岩／厚层泥岩组合方式,泥层的顶界将会正对波谷,此可作为标定时的第二标志层;大断面下往往会出现近断面相位上提、远断面下拉,从而造成断裂假象;煤层（低速）横向相变或突变,将会在相变处或突变处造成断裂解释误区。这些认识应用效果良好。 相似文献
15.
通过对平北地区三维地震构造解释,阐述了平北地区主要地质界面的地震反射层特征;通过对地震剖面的系统研究,分析了平北地区在三大鼻状构造背景上,受断裂影响和控制形成的团结亭断背斜、宝云亭断垒带、武云亭、孔雀亭、来鹤亭等断块群的构造特征;刻画了平北地区断层的性质和平面分布特征;并对该地区构造演化作了分析。 相似文献
16.
The evolution of an allochthonous salt sheet underlying the Mississippi fan is quantified using the two-dimensional LOCACE balanced section program. A first set of tests shows that the shape of the principal normal fault associated with the salt sheet is inconsistent with a roll-over geometry when using flexural slip or simple 120° linear shear criteria with a fixed footwall geometry. The next test with corrected fault geometry allows coherent restoration at the early Lower Miocene using the flexural slip criterion. In two-dimensional reconstructions, the area of salt cannot be balanced, i.e. the area available for salt is considerably wider than the actual salt area shown on the initial section. Thus either salt was dissolved or, perhaps more likely, salt moved outside the plane of section calling for a three-dimensional volumetric reconstruction procedure. The final interpretation is geometrically consistent and suggests that since early Lower Miocene time a large amount of salt moved out of the plane of section forming the allochthonous salt masses. An attempt to approximately balance salt volumes in three dimensions suggests that the amount of salt escaping the system is at least 18%. 相似文献
17.
为了更有效地研究伸展盆地,论述了目前伸展盆地研究中几种常用软件的方法和原理,包括用于盆地反演研究的一维Airy均衡模型、二维挠曲回剥模型、平衡剖面技术以及用于盆地正演研究的挠曲悬臂梁模型和二维粘弹塑性热-力学数值模拟模型。综合分析了这些方法的原理、优势与不足,在此基础上进一步探讨了不同方法之间的综合运用。其中平衡剖面技术恢复得到的盆地剖面可以为裂谷期构造沉降展布范围提供约束,并与挠曲悬臂梁模型结合可以得到盆地演化过程中不同时期上地壳的伸展减薄情况。数值模拟方法则在以上盆地模拟方法得到的结果约束下,模拟伸展盆地的形成过程进而得到初始地质参数与演化过程。综合利用盆地分析的方法可以对盆地演化有更准确的认识并指导油气资源的勘探与开发。 相似文献
18.