共查询到20条相似文献，搜索用时 171 毫秒
1.
王敏 《中国海洋大学学报(自然科学版)》2015,45(1):90-94,101
本文以青岛地铁3号线、2号线基坑工程为背景,针对基坑"土岩组合"的特点,研究施工过程中对环境污染与破坏的影响因素,提出地铁工程绿色施工内涵。在广泛调查基础上,确定了9个指标项,44个因素项,129个分因素项,提出绿色施工评价标准。通过层次分析计算指标与因素的权重,得到评价模型,对地铁工程绿色施工环境影响进行评价。研究结果表明,该评价模型简单易行,对推动地铁工程绿色施工具有现实意义。 相似文献
2.
3.
介绍了滨海路下立交桥空心极梁施工中的模板工艺和预应力张拉工艺,总结了本工程的施工经验、体会和特殊情况下的处理措施,可为同类工程施工所借鉴。 相似文献
4.
水下悬浮隧道锚索稳定性分析 总被引：1，自引：0，他引：1
为研究水下悬浮隧道锚索的稳定性,建立锚索在涡街激励作用下振动的数学方程,采用伽辽金法对其进行化简,锚索振动的稳定性通过Lyapunov指数法进行判断,分析了锚索动静张力比的大小、悬浮隧道系统的阻尼比和锚索参数激励频率对锚索振动稳定性的影响。计算结果表明,锚索振动失稳的范围取决于锚索的动静张力比、锚索的阻尼比和频率比(锚索参数激励频率与锚索1阶模态固有频率的比值);当频率比为1和2左右时,随着锚索动静张力比的增大和阻尼比的减小,锚索逐渐从稳定状态转变为不稳定状态,且锚索的不稳定区域逐渐增大。 相似文献
5.
6.
王敏 《中国海洋大学学报(自然科学版)》2014,44(12):97-99,110
以青岛地铁一期工程3号线中山公园为例,对信息化施工反馈技术在地下工程施工沉降控制中的的应用进行研究。施工过程中通过跟踪监测,及时将监测结果反馈给勘察、设计、施工中,确保周边环境始终处在安全受控状态。应用效果表明,信息化反馈技术能够有效控制岩土变形,实现了施工沉降控制,减小施工对周边环境影响。 相似文献
7.
理想流体层中悬浮隧道管体动水荷载研究-P波 总被引：1，自引：0，他引：1
针对理想流体层中的悬浮隧道管体及锚索体系,借助波动方程理论对平面P-波作用下的悬浮隧道,通过引入其管体只在竖直方面上运动和产生刚体位移而不发生变形以及只考虑海水和管体质量产生的动力效应等假定,同时考虑管体上下部海水和锚索刚度及间距的影响,导出了在理想流体层中悬浮隧道管体受到的动水荷载的计算方程组和边界条件。结合一座典型的悬浮隧道,通过参数研究,分析了上部海水厚度h,P-波频率值ω,入射角度α,锚索刚度Kc和锚索间距L对动水荷载值的影响,结果表明:上部海水的存在有利于减小动水荷载值,P波频率值与海水频率一致时将产生共振,入射角度的增大会大幅减小动水荷载值,较小的锚索刚度和较大的锚索间距也会减小动水荷载值。 相似文献
8.
在对预应力设计基本要求及布束原则、预应力设计的理论依据及预应力筋布置形式分析的基础上,对大跨径预应力混凝土连续刚构桥的预应力钢束配置进行了研究,通过已建连续刚构桥得出预应力钢束的用量,并通过有限元程序对所得数据进行验证分析,得出了一些规律和结论,可以作为同类桥梁的设计参考. 相似文献
9.
10.
蜊门港海峡特大桥是浙江省象山县石南高陆岛交通工程的组成部分。该桥全长为２１９ｍ，宽为９．８ｍ，主孔跨度为１５０ｍ，为预应力混凝土组合悬臂桁架拱结构。该桥横跨两岛之间，与国内同类型的桥梁相比，在结构设计、材料工艺、施工方法等方面有较大的改进和突破，故使这种新型结构体系在实践中又增添不少可以借鉴的经验，值得推广和应用。本文结合跨海桥的特点，从设置定位装置、空中翻身与悬拼操作、预应力筋张拉、体系转换等方面作了详细介绍，并提出了可供借鉴的安装经验和建议。 相似文献
11.
I.M.L. Ridge 《Ocean Engineering》2009,36(9-10):650-660
An earlier paper by the author discussed the behaviour of helically spun wire ropes when subject to axial load [Ridge, I.M.L., 2008. Torsional characterization of ropes used offshore. Journal of Strain Analysis 43(2), 121–139.]. The response of the rope varied, depending upon the rope's construction and whether the end of the rope was free to rotate or was fixed. This paper presents the results of an extensive research programme which highlight the practical implications of the torsional fatigue behaviour of ropes with especial reference to their use in offshore applications. The results are also relevant to a much broader range of rope applications where long lengths of rope are employed such as deep mine hoisting and reversible aerial cableways. The torque which may be generated in the various components used offshore may have serious effects in both handling and installation, as well as in the longer term service (fatigue) performance. 相似文献
12.
A review of the acoustic-emission monitoring of wire rope 总被引：3，自引：0，他引：3
This review of existing technology on the acoustic-emission inspection of wire rope has confirmed that the most realistic application of the method is in the detection and location of wire breaks. However, the successful detection and location of wire breaks is dependent upon such factors as rope construction, diameter, length and number of wire breaks. The occurrence of large numbers of wire breaks work against the technique; although such large numbers of wire breaks are only likely to be generated in the laboratory during the fatigue testing of rope specimens. This review has shown that acoustic emission can be a useful laboratory tool, but application of the technique to ropes in service will probably be limited and specific to certain applications. In order to develop the technique for practical applications, future work needs to concentrate on the rope constructions that are most commonly used in industry, also those which are best suited to the technique, and developing wire-break signatures that could be designed into future equipment. This can be achieved through narrow-band filters, matching the resonant frequency of the transducers to the main frequency components of a wire break and pattern recognition software. 相似文献
13.
人工浮鱼礁型式多样，适应水深范围广，优化锚泊方式可规模化建设浮鱼礁群，是海洋中上层生境构建的重要手段。中上层浮鱼礁投放于近海，属于海岸工程范畴，抗浪性能是其结构设计的关键。根据有限单元法和集中质量点法，详细阐述和推导了中上层浮鱼礁各构成组件连接位置处点或单元的相互耦合受力和运动处理方法，以及浮鱼礁出水条件的判别方法和水质点速度、加速度的修正方法。建立的波浪作用下三维浮鱼礁动力响应数值模型与其在波浪水槽中的物理模型试验对比，验证了数值模型的正确性。最后建立了一种新型锚泊方式的浮鱼礁动力响应数值模型，分析了浮鱼礁摆动角度、锚绳拉力、网衣系缚点总拉力的历时变化。研究结果可为中上层浮鱼礁优化结构形状和搭配浮体、配重提供判断依据。 相似文献
14.
Offshore floating facilities are fixed by anchoring systems embedded in seabed soils through chains or ropes. The chain inverse catenary profile embedded in soils influences both the anchor failure mechanism and the anchor holding capacity. The chain mobilizes varying soil normal and tangential resistances during motion, hence it is with difficulty to depict the chain profile. The present work proposed a modified method to estimate the chain inverse catenary profile with high accuracy based on the chain equations and the chain yield envelope. A testing arrangement with three load cells and two MEMS (Micro-electromechanical systems) accelerometers included was designed in model tests. By model tests, the loading combinations of the soil tangential and normal resistances on the chain were obtained and the yield envelopes for both chain and rope were determined. In addition, supplemental model tests were performed to validate the modified method proposed in this study, and the testing results indicated that the estimated chain inverse catenary profile was in good agreement with the actual one. Moreover, the testing arrangement is beneficial in investigating the chain-soil-anchor interaction. 相似文献
15.
A case study of a modified gravity type cage and mooring system using numerical and physical models 总被引：2，自引：0，他引：2
DeCew J. Fredriksson D.W. Bugrov L. Swift M.R. Eroshkin O. Celikkol B. 《Oceanic Engineering, IEEE Journal of》2005,30(1):47-58
A modified gravity-type cage, developed by SADCO Shelf Ltd., was examined using numerical and physical models to determine if the cage and mooring system is suitable for an exposed site south of the Isles of Shoals, NH. The 3000-m/sup 3/ SADCO Shelf Submersible Fish Cage has angled stays between the upper framework and the ballasted bottom rim (in addition to net) to resist the horizontal shear deformation. The mooring system consists of three legs-each made up of a taut vertical chain and an angled rope, both leading to deadweight anchors. Normalized response amplitudes (response amplitude operators) were found for motion response in heave, surge and pitch, and load response in the anchor and bridle lines, in regular (single frequency) waves. In addition, a stochastic approach was taken to determine the motion and load transfer functions in random waves using a spectrum representative of seas at the selected site. In general, the system motion had a highly damped response, with no resonant peaks within the wave excitation range of 0.05 to 0.45 Hz. The anchor line force response was at all frequencies below 5 kN per meter of wave amplitude. The physical model tests showed consistently more conservative (larger) results compared to those for the numerical model. 相似文献
16.
- This article briefs how to improve the holding power of a drilling vessel's anchor and to remove those unreasonable structures by such a technology - underwater-explosion technology. The article gives details of the structure, characteristics and applications of a rocket-launched anchor; as well as the principle, properties, applications of directional explosion cutting. 相似文献
17.
This paper describes the development of a computational model to predict the response of synthetic-fiber ropes under both monotonic and cyclic loads. The model addresses the issue of damage to a rope cross-section and its effect on rope response. Isotropic damage is assumed and is therefore characterized by a scalar quantity known as the damage index. The damage index is used to quantify the amount of deterioration that takes place in a damaged rope throughout its loading history. For the current study, data obtained from static tension tests are used to determine the evolution relationship for the damage index. This relationship is based on the stiffness ratio between experimental data and simulation of rope response without any source of damage and is assumed to be described by an exponential equation. Numerical simulations of damaged rope behavior compare well with experimental results. 相似文献
18.
A numerical method for the dynamic simulation of towed cables is presented. The cable is loaded by fluid drag, tension, gravity and buoyancy, including the effects of weights and floats. The development of a cable can be simulated as well as the separation of a cable under excessive load and the subsequent behavior of the broken parts. The system is constructed from a set of generic elements representing such items as cable or rope strands, knots (reference points on rope sections), kinks (sliding reference points on cable sections that change length), cable ends and winches. A mathematical graph organizes these elements in a general and flexible fashion: it allows construction of complex systems and permits structural redefinition during the simulation. The nodes of the graph coincide with the various reference points of the problem, at which physical parameters are lumped and to which sets of ordinary differential equations are associated that define the motions of the points. The links of the graph describe the physical connections between the nodes. Application of new methods for solving stiff, sparse systems of coupled ordinary differential equations enables efficient simulation of snap-loads and other severe events. Results are presented that compare quantitatively with laboratory measurements. A further example shows the behavior of a breaking cable that is qualitatively reasonable. 相似文献
19.
法向承力锚(Vertically Loaded Plate Anchor,VLA)是一种适用于深水的新型系泊基础,它的拖曳安装过程直接决定了其系泊定位的精度和锚体的最终承载能力。综合考虑VLA锚体、锚泊线和上部船体的运动,建立了一种新的准静力整体分析模型。模型包括不断贯入海床的锚体、锚泊线(土中反悬链段和水中悬链段)和安装船体三部分,针对确定的锚泊线长度,安装船运动张紧锚泊线进行安装的过程,计算了此过程中锚体的运动轨迹、锚泊线形态和作用在船体上的锚泊线张力矢量的变化,重点分析了不同抛链长度和海床土体的参数对安装过程控制的影响,发现链长与水深之比达到5时,接近极限贯入深度。 相似文献