首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Although “barkinite” has long been studied by many geologists, its geochemical characteristics and environment of deposition are still not known in detail. In order to study the petrography and geochemical characteristics of “barkinite”, coal samples from two Permian coal seams were taken from the Dahe mine, Guizhou Province. The samples were separated into maceral fractions, and then analyzed by microscopical, isotopic, Rock-Eval, and geochemical methods. The microscopical results indicate that “barkinite” occurs as four main types. According to their relationship to other maceral groups, “barkinite” is ostensibly formed under variably dry–wet or oxidizing–reducing conditions. The extract yield, isotope data and Rock-Eval values of “barkinite” are different from other macerals. Microscopical and geochemical results indicate that “barkinite” forms part of the liptinite group.  相似文献   

2.
Seismic reflection and refraction data were collected west of New Zealand's South Island parallel to the Pacific–Australian Plate boundary. The obliquely convergent plate boundary is marked at the surface by the Alpine Fault, which juxtaposes continental crust of each plate. The data are used to study the crustal and uppermost mantle structure and provide a link between other seismic transects which cross the plate boundary. Arrival times of wide-angle reflected and refracted events from 13 recording stations are used to construct a 380-km long crustal velocity model. The model shows that, beneath a 2–4-km thick sedimentary veneer, the crust consists of two layers. The upper layer velocities increase from 5.4–5.9 km/s at the top of the layer to 6.3 km/s at the base of the layer. The base of the layer is mainly about 20 km deep but deepens to 25 km at its southern end. The lower layer velocities range from 6.3 to 7.1 km/s, and are commonly around 6.5 km/s at the top of the layer and 6.7 km/s at the base. Beneath the lower layer, the model has velocities of 8.2–8.5 km/s, typical of mantle material. The Mohorovicic discontinuity (Moho) therefore lies at the base of the second layer. It is at a depth of around 30 km but shallows over the south–central third of the profile to about 26 km, possibly associated with a southwest dipping detachment fault. The high, variable sub-Moho velocities of 8.2 km/s to 8.5 km/s are inferred to result from strong upper mantle anisotropy. Multichannel seismic reflection data cover about 220 km of the southern part of the modelled section. Beneath the well-layered Oligocene to recent sedimentary section, the crustal section is broadly divided into two zones, which correspond to the two layers of the velocity model. The upper layer (down to about 7–9 s two-way travel time) has few reflections. The lower layer (down to about 11 s two-way time) contains many strong, subparallel reflections. The base of this reflective zone is the Moho. Bi-vergent dipping reflective zones within this lower crustal layer are interpreted as interwedging structures common in areas of crustal shortening. These structures and the strong northeast dipping reflections beneath the Moho towards the north end of the (MCS) line are interpreted to be caused by Paleozoic north-dipping subduction and terrane collision at the margin of Gondwana. Deeper mantle reflections with variable dip are observed on the wide-angle gathers. Travel-time modelling of these events by ray-tracing through the established velocity model indicates depths of 50–110 km for these events. They show little coherence in dip and may be caused side-swipe from the adjacent crustal root under the Southern Alps or from the upper mantle density anomalies inferred from teleseismic data under the crustal root.  相似文献   

3.
The Hidaka Collision Zone (HCZ), central Hokkaido, Japan, is a good target for studies of crustal evolution and deformation processes associated with an arc–arc collision. The collision of the Kuril Arc (KA) with the Northeast Japan Arc (NJA), which started in the middle Miocene, is considered to be a controlling factor for the formation of the Hidaka Mountains, the westward obduction of middle/lower crustal rocks of the KA (the Hidaka Metamorphic Belt (HMB)) and the development of the foreland fold-and-thrust belt on the NJA side. The “Hokkaido Transect” project undertaken from 1998 to 2000 was a multidisciplinary effort intended to reveal structural heterogeneity across this collision zone by integrated geophysical/geological research including seismic refraction/reflection surveys and earthquake observations. An E–W trending 227 km-long refraction/wide-angle reflection profile found a complicated structural variation from the KA to the NJA across the HCZ. In the east of the HCZ, the hinterland region is covered with 4–4.5 km thick highly undulated Neogene sedimentary layers, beneath which two eastward dipping reflectors were imaged in a depth range of 10–25 km, probably representing the layer boundaries of the obducting middle/lower crust of the KA. The HMB crops out on the westward extension of these reflectors with relatively high Vp (>6.0 km/s) and Vp/Vs (>1.80) consistent with middle/lower crustal rocks. Beneath these reflectors, more flat and westward dipping reflector sequences are situated at the 25–27 km depth, forming a wedge-like geometry. This distribution pattern indicates that the KA crust has been delaminated into more than two segments under our profile. In the western part of the transect, the structure of the fold-and-thrust belt is characterized by a very thick (5–8 km) sedimentary package with a velocity of 2.5–4.8 km/s. This package exhibits one or two velocity reversals in Paleogene sedimentary layers, probably formed by imbrication associated with the collision process. From the horizontal distribution of these velocity reversals and other geophysical/geological data, the rate of crustal shortening in this area is estimated to be greater than 3–4 mm/year, which corresponds to 40–50% of the total convergence rate between the NJA and the Eurasian Plate. This means that the fold-and-thrust belt west of the HCZ is absorbing a large amount of crustal deformation associated with plate interaction across Hokkaido Island.  相似文献   

4.
A three-dimensional (3D) density model, approximated by two regional layers—the sedimentary cover and the crystalline crust (offshore, a sea-water layer was added), has been constructed in 1° averaging for the whole European continent. The crustal model is based on simplified velocity model represented by structure maps for main seismic horizons—the “seismic” basement and the Moho boundary. Laterally varying average density is assumed inside the model layers. Residual gravity anomalies, obtained by subtraction of the crustal gravity effect from the observed field, characterize the density heterogeneities in the upper mantle. Mantle anomalies are shown to correlate with the upper mantle velocity inhomogeneities revealed from seismic tomography data and geothermal data. Considering the type of mantle anomaly, specific features of the evolution and type of isostatic compensation, the sedimentary basins in Europe may be related into some groups: deep sedimentary basins located in the East European Platform and its northern and eastern margins (Peri-Caspian, Dnieper–Donets, Barents Sea Basins, Fore–Ural Trough) with no significant mantle anomalies; basins located on the activated thin crust of Variscan Western Europe and Mediterranean area with negative mantle anomalies of −150 to −200×10−5 ms−2 amplitude and the basins associated with suture zones at the western and southern margins of the East European Platform (Polish Trough, South Caspian Basin) characterized by positive mantle anomalies of 50–150×10−5 ms−2 magnitude. An analysis of the main features of the lithosphere structure of the basins in Europe and type of the compensation has been carried out.  相似文献   

5.
The Tocantins Province in Central Brazil is composed of a series of SSW–NNE trending terranes of mainly Proterozoic ages, which stabilized in the Neoproterozoic in the final collision between the Amazon and São Francisco cratons. No previous information on crustal seismic properties was available for this region. Several broadband stations were used to study the regional patterns of crustal and upper mantle structure, extending the results of a recent E–W seismic refraction profile. Receiver functions and surface wave dispersion showed a thin crust (33–37 km) in the Neoproterozoic Magmatic Arc terrane. High average crustal Vp/Vs ratios (1.74–1.76) were consistently observed in this unit. The foreland domain of the Brasília foldbelt, on the other hand, is characterized by thicker crust (42–43 km). Low Vp/Vs ratios (1.70–1.72) were observed in the low-grade foreland fold and thrust zone of the Brasília belt adjacent to the São Francisco craton. Teleseismic P-wave tomography shows that the lithospheric upper mantle has lower velocities beneath the Magmatic Arc and Goiás Massif compared with the foreland zone of the belt and São Francisco craton. The variations in crustal thickness and upper mantle velocities observed with the broadband stations correlate well with the measurements along the seismic refraction profile. The integration of all seismic observations and gravity data indicates a strong lithospheric contrast between the Goiás Massif and the foreland domain of the Brasília belt, whereas little variation was found across the foldbelt/craton surface boundary. These results support the hypothesis that the Brasília foreland domain and the São Francisco craton were part of a larger São Francisco-Congo continental plate in the final collision with the Amazon plate.  相似文献   

6.
Paul Mann  Asahiko Taira   《Tectonophysics》2004,389(3-4):137
Oceanic plateaus, areas of anomalously thick oceanic crust, cover about 3% of the Earth's seafloor and are thought to mark the surface location of mantle plume “heads”. Hotspot tracks represent continuing magmatism associated with the remaining plume conduit or “tail”. It is presently controversial whether voluminous and mafic oceanic plateau lithosphere is eventually accreted at subduction zones, and, therefore: (1) influences the eventual composition of continental crust and; (2) is responsible for significantly higher rates of continental growth than growth only by accretion of island arcs. The Ontong Java Plateau (OJP) of the southwestern Pacific Ocean is the largest and thickest oceanic plateau on Earth and the largest plateau currently converging on an island arc (Solomon Islands). For this reason, this convergent zone is a key area for understanding the fate of large and thick plateaus on reaching subduction zones.This volume consists of a series of four papers that summarize the results of joint US–Japan marine geophysical studies in 1995 and 1998 of the Solomon Islands–Ontong Java Plateau convergent zone. Marine geophysical data include single and multi-channel seismic reflection, ocean-bottom seismometer (OBS) refraction, gravity, magnetic, sidescan sonar, and earthquake studies. Objectives of this introductory paper include: (1) review of the significance of oceanic plateaus as potential contributors to continental crust; (2) review of the current theories on the fate of oceanic plateaus at subduction zones; (3) establish the present-day and Neogene tectonic setting of the Solomon Islands–Ontong Java Plateau convergent zone; (4) discuss the controversial sequence and timing of tectonic events surrounding Ontong Java Plateau–Solomon arc convergence; (5) present a series of tectonic reconstructions for the period 20 Ma (early Miocene) to the present-day in support of our proposed timing of major tectonic events affecting the Ontong Java Plateau–Solomon Islands convergent zone; and (6) compare the structural and deformational pattern observed in the Solomon Islands to ancient oceanic plateaus preserved in Precambrian and Phanerozoic orogenic belts. Our main conclusion of this study is that 80% of the crustal thickness of the Ontong Java Plateau is subducted beneath the Solomon island arc; only the uppermost basaltic and sedimentary part of the crust (7 km) is preserved on the overriding plate by subduction–accretion processes. This observation is consistent with the observed imbricate structural style of plateaus and seamount chains preserved in both Precambrian and Phanerozoic orogenic belts.  相似文献   

7.
In order to understand the origin of long-lived loci of volcanism (sometimes called “hot spots”) and their possible role in global tectonic processes, it is essential to know their deep structure. Even though some work has been done on the crustal, upper-mantle, and deep-mantle structure under some of these “hot spots”, the picture is far from clear. In an attempt to study the structure under the Yellowstone National Park U.S.A., which is considered to be such a “hot spot”, we recorded teleseisms using 26 telemetered seismic stations and three groups of portable stations. The network was operated within a 150 km radius centered on the Yellowstone caldera, the major, Quaternary volcanic feature of the Yellowstone region. Teleseismic delays of about 1.5 sec are found inside the caldera, and the delays remain high over a 100 km wide area around the caldera. The spatial distribution and magnitude of the delays indicate the presence of a large body of low-velocity material with horizontal dimensions corresponding approximately to the caldera size (40 km × 80 km) near the surface and extending to a depth of 200–250 km under the caldera. Using ray-tracing and inversion techniques, it is estimated that the compressional velocity inside the anomalous body is lower than in the surrounding rock by about 15% in the upper crust and by 5% in the lower crust and upper mantle. It is postulated that the body is partly composed of molten rock with a high degree of partial melting at shallow depths and is responsible for the observed Yellowstone volcanism. The large size of the partially molten body, taken together with its location at the head of a 350 km zone of volcanic propagation along the axis of the Snake River Plain, indicates that the volcanism associated with Yellowstone has its origin below the lithosphere and is relatively stationary with respect to plate motion. Using our techniques, we are unable to detect any measurable velocity contrast in the mantle beneath the low-velocity body, and, hence, we are unable to determine whether the Yellowstone melting anomaly is associated with a deep heat source or with any deep phenomenon such as a convection plume, chemical plume, or gravitational anchor.  相似文献   

8.
Crustal studies within the Japanese islands have provided important constraints on the physical properties and deformation styles of the island arc crust. The upper crust in the Japanese islands has a significant heterogeneity characterized by large velocity variation (5.5–6.1 km/s) and high seismic attenuation (Qp=100–400 for 5–15 Hz). The lateral velocity change sometimes occurs at major tectonic lines. In many cases of recent refraction/wide-angle reflection profiles, a “middle crust” with a velocity of 6.2–6.5 km/s is found in a depth range of 5–15 km. Most shallow microearthquakes are concentrated in the upper/middle crust. The velocity in the lower crust is estimated to be 6.6–7.0 km/s. The lower crust often involves a highly reflective zone with less seismicity, indicating its ductile rheology. The uppermost mantle is characterized by a low Pn velocity of 7.5–7.9 km/s. Several observations on PmP phase indicate that the Moho is not a sharp boundary with a distinct velocity contrast, but forms a transition zone from the upper mantle to the lower crust. Recent seismic reflection experiments revealed ongoing crustal deformations within the Japanese islands. A clear image of crustal delamination obtained for an arc–arc collision zone in central Hokkaido provides an important key for the evolution process from island arc to more felsic continental crust. In northern Honshu, a major fault system with listric geometry, which was formed by Miocene back arc spreading, was successfully mapped down to 12–15 km.  相似文献   

9.
A theory of two-dimensional geothermic problems is elaborated by the active temperature function at the vertical contact of two horizontally layered media. The approach offered before for oceanic ridges is extended to the case of continental margins and the upper part of a descending slab, i.e. “sink”, in island-arc areas. It is assumed that the plate motion in the oceanic area exists; in a descending area it is directed downward but remains zero on a continental side. Mathematically it symbolizes a “source—span—sink” thermal model. Numerical parameters are given for a theoretical thermal model of the heat-flow profile across the Kuril island arc, from the trench through Iturup Island, Sakhalin Island and the Tatarian Trough.  相似文献   

10.
In France, the Devonian–Carboniferous Variscan orogeny developed at the expense of continental crust belonging to the northern margin of Gondwana. A Visean–Serpukhovian crustal melting has been recently documented in several massifs. However, in the Montagne Noire of the Variscan French Massif Central, which is the largest area involved in this partial melting episode, the age of migmatization was not clearly settled. Eleven U–Th–Pbtot. ages on monazite and three U–Pb ages on associated zircon are reported from migmatites (La Salvetat, Ourtigas), anatectic granitoids (Laouzas, Montalet) and post-migmatitic granites (Anglès, Vialais, Soulié) from the Montagne Noire Axial Zone are presented here for the first time. Migmatization and emplacement of anatectic granitoids took place around 333–326 Ma (Visean) and late granitoids emplaced around 325–318 Ma (Serpukhovian). Inherited zircons and monazite date the orthogneiss source rock of the Late Visean melts between 560 Ma and 480 Ma. In migmatites and anatectic granites, inherited crystals dominate the zircon populations. The migmatitization is the middle crust expression of a pervasive Visean crustal melting event also represented by the “Tufs anthracifères” volcanism in the northern Massif Central. This crustal melting is widespread in the French Variscan belt, though it is restricted to the upper plate of the collision belt. A mantle input appears as a likely mechanism to release the heat necessary to trigger the melting of the Variscan middle crust at a continental scale.  相似文献   

11.
Anomalous crustal and upper mantle structure of northern Juan de Fuca plate is revealed from wide-angle seismic and gravity modelling. A 2-D velocity model is produced for refraction line II of the 1980 Vancouver Island Seismic Project (VISP80). The refraction data were recorded on three ocean bottom seismometers (OBSs) deployed at the ends and middle of a 110 km line oriented parallel to the North American continental margin. The velocity model is constructed via ray tracing and conforms to first-arrival amplitude observations and travel time picks of direct, converted and reflected phases. Between sub-sediment depths of 3 to 11 km, depths normally associated with the lower crust and upper oceanic mantle, the final model shows that compressional-wave velocities decrease significantly from southeast to northwest along the profile. At sub-sediment depths of 11 km at the northwestern end of the profile, P-wave velocities are as low as 7.2 km/s. A complementary 2-D gravity model using the geometry of the velocity model and velocity–density relationships characteristic of oceanic crust is produced. The high densities required to match the gravity field indicate the presence of peridotites containing 25–30% serpentine by volume, rather than excess gabbroic crust, within the deep low velocity zone. Anomalous travel time delays and unusual reflection characteristics observed from proximal seismic refraction and reflection experiments suggest a broader zone of partially serpentinized peridotites coincident with the trace of a pseudofault. We propose that partial serpentinization of the upper mantle is a consequence of slow spreading at the tip of a propagating rift.  相似文献   

12.
At the transition from the Permian to the Triassic, Eurasia was the site of voluminous flood-basalt extrusion and rifting. Major flood-basalt provinces occur in the Tunguska, Taymyr, Kuznetsk, Verkhoyansk–Vilyuy and Pechora areas, as well as in the South Chinese Emeishen area. Contemporaneous rift systems developed in the West Siberian, South Kara Sea and Pyasina–Khatanga areas, on the Scythian platform and in the West European and Arctic–North Atlantic domain. At the Permo–Triassic transition, major extensional stresses affected apparently Eurasia, and possibly also Pangea, as evidenced by the development of new rift systems. Contemporaneous flood-basalt activity, inducing a global environmental crisis, is interpreted as related to the impingement of major mantle plumes on the base of the Eurasian lithosphere. Moreover, the Permo–Triassic transition coincided with a period of regional uplift and erosion and a low-stand in sea level. Permo–Triassic rifting and mantle plume activity occurred together with a major reorganization of plate boundaries and plate kinematics that marked the transition from the assembly of Pangea to its break-up. This plate reorganization was possibly associated with a reorganization of the global mantle convection system. On the base of the geological record, we recognize short-lived and long-lived plumes with a duration of magmatic activity of some 10–20 million years and 100–150 million years, respectively. The Permo–Triassic Siberian and Emeishan flood-basalt provinces are good examples of “short-lived” plumes, which contrast with such “long lived” plumes as those of Iceland and Hawaii. The global record indicates that mantle plume activity occurred episodically. Purely empirical considerations indicate that times of major mantle plume activity are associated with periods of global mantle convection reorganization during which thermally driven mantle convection is not fully able to facilitate the necessary heat transfer from the core of the Earth to its surface. In this respect, we distinguish between two geodynamically different scenarios for major plume activity. The major Permo–Triassic plume event followed the assembly Pangea and the detachment of deep-seated subduction slabs from the lithosphere. The Early–Middle Cretaceous major plume event, as well as the terminal–Cretaceous–Paleocene plume event, followed a sharp acceleration of global sea-floor spreading rates and the insertion of new subduction zone slabs deep into the mantle. We conclude that global plate kinematics, driven by mantle convection, have a bearing on the development of major mantle plumes and, to a degree, also on the pattern of related flood-basalt magmatism.  相似文献   

13.
In May 2002, we collected a new crustal refraction profile from Battle Mountain, Nevada across western Nevada, the Reno area, Lake Tahoe, and the northern Sierra Nevada Mountains to Auburn, CA. Mine blasts and earthquakes were recorded by 199 Texan instruments extending across this more than 450-km-long transect. The use of large mine blasts and the ultra-portable Texan recorders kept the field costs of this profile to less than US$10,000. The seismic sources at the eastern end were mining blasts at Barrick's GoldStrike mine. The GoldStrike mine produced several ripple-fired blasts using 8000–44,000 kg of ANFO each, a daily occurrence. First arrivals from the larger GoldStrike blasts are obvious to distances of 300 km in the raw records. First arrivals from a quarry blast west of the survey near Watsonville, CA, located by the Northern California Seismic Network with a magnitude of 2.2, can be picked across the recording array to distances of 600 km. The Watsonville blast provides a western source, nearly reversing the GoldStrike blasts. A small earthquake near Bridgeport, CA. also produced pickable P-wave arrivals across the transect, providing fan-shot data. Arrivals from M5 events in the Mariana and Kuril Islands also appear in the records. This refraction survey observes an unexpectedly deep crustal root under the northern Sierra Nevada range, over 50 km in thickness and possibly centered west of the topographic crest. Pn delays of 4–6 s support this interpretation. At Battle Mountain, Nevada, we observe anomalously thin crust over a limited region perhaps only 150 km wide, with a Moho depth of 19–23 km. Pn crossover distances of less than 80 km support this anomaly, which is surrounded by observations of more normal, 30-km-thick crust. A 10-km-thick and high-velocity lower-crustal “pillow” is an alternative hypothesis, but unlikely due to the lack of volcanics west of Battle Mountain. Large mine and quarry blasts prove very effective crustal refraction sources when recorded with a dense receiver array, even over distances exceeding 600 km. New elastic synthetic seismogram modeling suggests that Pn can be strong as a first arrival, easing the modeling and interpretation of crustal refraction data. Fast eikonal computations of first-arrival time can match pickable Pn arrival times.  相似文献   

14.
This is a critical assessment of the paper by Oszczypko et al. (2004: Cretaceous Research 25, 89–113), in which they tried to prove a mid-Cretaceous age for the Szlachtowa (“black flysch”) and Opaleniec Formations, in the Pieniny Klippen Belt, West Carpathians, both of which had previously been shown to be of Jurassic age. We argue that the mid-Cretaceous age assignment is a misinterpretation, primarily resulting from their field samples having been collected from some Cretaceous lithostratigraphic units, tectonically associated with the Jurassic formations, and/or from tectonic contact-breccias involving Jurassic and Cretaceous strata. In addition, we suggest that they have overlooked a number of significant palaeontological papers, published since 1962, which record the presence of in situ ammonites, aptychi, belemnites, thin-shelled bivalves (Bositra), gryphaeids, foraminifera, and ostracod assemblages, all indicating a Jurassic (mainly Aalenian), and not a Cretaceous, age for the Szlachtowa Formation, and also the in situ Jurassic (Bajocian) ammonites and thin-shelled bivalves (Bositra), Bositra-microfacies, and age-diagnostic foraminiferal assemblages of the Opaleniec Formation.Our presentation here of recently published dinocyst data from well-preserved assemblages further supports the Jurassic ages for the Szlachtowa (“black flysch”) and Opaleniec Formations.  相似文献   

15.
We present a new three-dimensional SV-wave velocity model for the upper mantle beneath South America and the surrounding oceans, built from the waveform inversion of 5850 Rayleigh wave seismograms. The dense path coverage and the use of higher modes to supplement the fundamental mode of surface waves allow us to constrain seismic heterogeneities with horizontal wavelengths of a few hundred kilometres in the uppermost 400 km of the mantle.The large scale features of our tomographic model confirm previous results from global and regional tomographic studies (e.g. the depth extent of the high velocity cratonic roots down to about 200–250 km).Several new features are highlighted in our model. Down to 100 km depth, the high velocity lid beneath the Amazonian craton is separated in two parts associated with the Guyana and Guapore shields, suggesting that the rifting episode responsible for the formation of the Amazon basin has involved a significant part of the lithosphere. Along the Andean subduction belt, the structure of the high velocity anomaly associated with the sudbduction of the Nazca plate beneath the South American plate reflects the along-strike variation in dip of the subducting plate. Slow velocities are observed down to about 100 km and 150 km at the intersection of the Carnegie and Chile ridges with the continent and are likely to represent the thermal anomalies associated with the subducted ridges. These lowered velocities might correspond to zones of weakness in the subducted plate and may have led to the formation of “slab windows” developed through unzipping of the subducted ridges; these windows might accommodate a transfer of asthenospheric mantle from the Pacific to the Atlantic ocean. From 150 to 250 km depth, the subducting Nazca plate is associated with high seismic velocities between 5°S and 37°S. We find high seismic velocities beneath the Paraná basin down to about 200 km depth, underlain by a low velocity anomaly in the depth range 200–400 km located beneath the Ponta Grossa arc at the southern tip of the basin. This high velocity anomaly is located southward of a narrow S-wave low velocity structure observed between 200 and 500–600 km depth in body wave studies, but irresolvable with our long period datasets. Both anomalies point to a model in which several, possibly diachronous, plumes have risen to the surface to generate the Paraná large igneous province (LIP).  相似文献   

16.
Possibilities for the fate of oceanic plateaus at subduction zones range from complete subduction of the plateau beneath the arc to complete plateau–arc accretion and resulting collisional orogenesis. Deep penetration, multi-channel seismic reflection (MCS) data from the northern flank of the Solomon Islands reveal the sequence stratigraphy, structural style, and age of deformation of an accretionary prism formed during late Neogene (5–0 Ma) convergence between the 33-km-thick crust of the Ontong Java oceanic plateau and the 15-km-thick Solomon island arc. Correlation of MCS data with the satellite-derived, free-air gravity field defines the tectonic boundaries and internal structure of the 800-km-long, 140-km-wide accretionary prism. We name this prism the “Malaita accretionary prism” or “MAP” after Malaita, the largest and best-studied island exposure of the accretionary prism in the Solomon Islands. MCS data, gravity data, and stratigraphic correlations to islands and ODP sites on the Ontong Java Plateau (OJP) reveal that the offshore MAP is composed of folded and thrust faulted sedimentary rocks and upper crystalline crust offscraped from the Solomon the subducting Ontong Java Plateau (Pacific plate) and transferred to the Solomon arc. With the exception of an upper, sequence of Quaternary? island-derived terrigenous sediments, the deformed stratigraphy of the MAP is identical to that of the incoming Ontong Java Plateau in the North Solomon trench.We divide the MAP into four distinct, folded and thrust fault-bounded structural domains interpreted to have formed by diachronous, southeast-to-northwest, and highly oblique entry of the Ontong Java Plateau into a former trench now marked by the Kia–Kaipito–Korigole (KKK) left-lateral strike-slip fault zone along the suture between the Solomon arc and the MAP. The structural style within each of the four structural domains consists of a parallel series of three to four fault propagation folds formed by the seaward propagation of thrust faults roughly parallel to sub-horizontal layering in the upper crystalline part of the OJP. Thrust fault offsets, spacing between thrusts, and the amplitude of related fault propagation folds progressively decrease to the west in the youngest zone of active MAP accretion (Choiseul structural domain). Surficial faulting and folding in the most recently deformed, northwestern domain show active accretion of greater than 1 km of sedimentary rock and 6 km, or about 20%, of the upper crystalline part of the OJP. The eastern MAP (Malaita and Ulawa domains) underwent an earlier, similar style of partial plateau accretion. A pre-late Pliocene age of accretion (3.4 Ma) is constrained by an onshore and offshore major angular unconformity separating Pliocene reefal limestone and conglomerate from folded and faulted pelagic limestone of Cretaceous to Miocene age. The lower 80% of the Ontong Java Plateau crust beneath the MAP thrust decollement appears unfaulted and unfolded and is continuous with a southwestward-dipping subducted slab of presumably denser plateau material beneath most of the MAP, and is traceable to depths >200 km in the mantle beneath the Solomon Islands.  相似文献   

17.
The deep structure of the gabbro–anorthosite–rapakivi granite (“AMCG-type”) Korosten Pluton (KP) in the northwestern Ukrainian Shield was studied by 3-D modelling of the gravity and magnetic fields together with previous seismic data. The KP occupies an area of ca. 12,500 km2 and comprises several layered gabbro-anorthositic intrusions enveloped by large volumes of rapakivi-type granitoids. Between 1.80 and 1.74 Ga, the emplacement of mafic and associated granitoid melts took place in several pulses. The 3-D geophysical reconstruction included: (a) modelling of the density distribution in the crust using the observed Bouguer anomaly field constrained by seismic data on Moho depth, and (b) modelling of the magnetic anomaly field in order to outline rock domains of various magnetisation, size and shape in the upper and lower crust. The density modelling was referred to three depth levels of 0 to 5, 5 to 18, and 18 km to Moho, respectively. The 3-D reconstruction demonstrates close links between the subsurface geology of the KP and the structure of the lower crust. The existence of a non-magnetic body with anomalously high seismic velocity and density is documented. Most plausibly, it represents a gabbroic stock (a parent magma chamber) with a vertical extent of ca. 20 km, penetrating the entire lower crust. This stock has a half-cylindrical shape and a diameter of ca. 90 km. It appears to be connected with a crust–mantle transitional lens previously discovered by EUROBRIDGE seismic profiling. The position of the stock relative to the subsurface outlines of the KP is somewhat asymmetric. This may be due to a connection between the magmatism and sets of opposite-dipping faults initially developed during late Palaeoproterozoic collisional deformation in the Sarmatian crustal segment. Continuing movements and disturbances of the upper mantle and the lower crust during post-collisional tectonic events between 1.80 and 1.74 Ga may account for the long-lived, recurrent AMCG magmatism.  相似文献   

18.
In the interior of the Iberian Peninsula, the main geomorphic features, mountain ranges and basins, seems to be arranged in several directions whose origin can be related to the N–S plate convergence which occurred along the Cantabro–Pyrenean border during the Eocene–Lower Miocene time span. The Iberian Variscan basement accommodated part of this plate convergence in three E–W trending crustal folds as well as in the reactivation of two left-lateral NNE–SSW strike-slip belts. The rest of the convergence was assumed through the inversion of the Iberian Mesozoic Rift to form the Iberian Chain. This inversion gave rise to a process of oblique crustal shortening involving the development of two right lateral NW–SE shear zones. Crustal folds, strike-slip corridors and one inverted rift compose a tectonic mechanism of pure shear in which the shortening is solved vertically by the development of mountain ranges and related sedimentary basins. This model can be expanded to NW Africa, up to the Atlasic System, where N–S plate convergence seems also to be accommodated in several basement uplifts, Anti-Atlas and Meseta, and through the inversion of two Mesozoic rifts, High and Middle Atlas. In this tectonic situation, the microcontinent Iberia used to be firmly attached to Africa during most part of the Tertiary, in such a way that N–S compressive stresses could be transmitted from the collision of the Pyrenean boundary. This tectonic scenario implies that most part of the Tertiary Eurasia–Africa convergence was not accommodated along the Iberia–Africa interface, but in the Pyrenean plateboundary. A broad zone of distributed deformation resulted from the transmission of compressive stresses from the collision at the Pyrenean border. This distributed, intraplate deformation, can be easily related to the topographic pattern of the Africa–Eurasia interface at the longitude of the Iberian Peninsula.Shortening in the Rif–Betics external zones – and their related topographic features – must be conversely related to more “local” driven mechanisms, the westward displacement of the “exotic” Alboran domain, other than N–S convergence. The remaining NNW–SSE to NW–SE, latest Miocene up to Present convergence is also being accommodated in this zone straddling Iberia and Morocco, at the same time as a new ill-defined plate boundary that is being developed between Europe and Africa.  相似文献   

19.
Leping coal is known for its high content of “barkinite”, which is a unique liptinite maceral apparently found only in the Late Permian coals of South China. “Barkinite” has previously identified as suberinite, but on the basis of further investigations, most coal petrologists conclude that “barkinite” is not suberinite, but a distinct maceral. The term “barkinite” was introduced by (State Bureau of Technical Supervision of the People's Republic of China, 1991, GB 12937-91 (in Chinese)), but it has not been recognized by ICCP and has not been accepted internationally.In this paper, elemental analyses (EA), pyrolysis-gas chromatography, Rock-Eval pyrolysis and optical techniques were used to study the optical features and the hydrocarbon-generating model of “barkinite”. The results show that “barkinite” with imbricate structure usually occurs in single or multiple layers or in a circular form, and no definite border exists between the cell walls and fillings, but there exist clear aperture among the cells.“Barkinite” is characterized by fluorescing in relatively high rank coals. At low maturity of 0.60–0.80%Ro, “barkinite” shows strong bright orange–yellow fluorescence, and the fluorescent colors of different cells are inhomogeneous in one sample. As vitrinite reflectance increases up to 0.90%Ro, “barkinite” also displays strong yellow or yellow–brown fluorescence; and most of “barkinite” lose fluorescence at the maturity of 1.20–1.30%Ro. However, most of suberinite types lose fluorescence at a vitrinite reflectance of 0.50% Ro, or at the stage of high volatile C bituminous coal. In particular, the cell walls of “barkinite” usually show red color, whereas the cell fillings show yellow color under transmitted light. This character is contrary to suberinite.“Barkinite” is also characterized by late generation of large amounts of liquid oil, which is different from the early generation of large amounts of liquid hydrocarbon. In addition, “barkinite” with high hydrocarbon generation potential, high elemental hydrogen, and low carbon content. The pyrolysis products of “barkinite” are dominated by aliphatic compounds, followed by low molecular-weight aromatic compounds (benzene, toluene, xylene and naphthalene), and a few isoprenoids. The pyrolysis hydrocarbons of “barkinite” are mostly composed of light oil (C6–C14) and wet gas (C2–C5), and that heavy oil (C15+) and methane (C1) are the minor hydrocarbon.In addition, suberinite is defined only as suberinized cell walls—it does not include the cell fillings, and the cell lumens were empty or filled by corpocollinites, which do not show any fluorescence. Whereas, “barkinite” not only includes the cell walls, but also includes the cell fillings, and the cell fillings show bright yellow fluorescence.Since the optical features and the hydrocarbon-generating model of “barkinite” are quite different from suberinite. We suggest that “barkinite” is a new type of maceral.  相似文献   

20.
Numerous ge ological and geophysical investigations within the past decades have shown that the Rhinegraben is the most pronounced segment of an extended continental rift system in Europe. The structure of the upper and lower crust is significantly different from the structure of the adjacent “normal” continental crust.

Two crustal cross-sections across the central and southern part of the Rhinegraben have been constructed based on a new evaluation of seismic refraction and reflection measurements. The most striking features of the structure derived are the existence of a well-developed velocity reversal in the upper crust and of a characteristic cushion-like layer with a compressional velocity of 7.6–7.7 km/sec in the lower crust above a normal mantle with 8.2 km/sec. Immediately below the sialic low-velocity zone in the middle part of the crust, an intermediate layer with lamellar structure and of presumably basic composition could be mapped.

It is interesting to note that the asymmetry of the sedimentary fill in the central Rhinegraben seems to extend down deeper into the upper crust as indicated by the focal depths of earthquakes. The top of the rift “cushion” shows a marked relief which has no obvious relation to the crustal structure above it or the visible rift at the surface.  相似文献   


设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号