首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 468 毫秒
1.
The Jinman Cu polymetallic deposit is located within Middle Jurassic sandstone and slate units in the Lanping Basin of southwestern China. The Cu mineralization occurs mainly as sulfide‐bearing quartz–carbonate veins in faults and fractures, controlled by a Cenozoic thrust–nappe system. A detailed study of fluid inclusions from the Jinman deposit distinguishes three types of fluid inclusions in syn‐ore quartz and post‐ore calcite: aqueous water (type A), CO2–H2O (type B), and CO2‐dominated (type C) fluid inclusions. The homogenization temperatures of CO2–H2O inclusions vary from 208°C to 329°C, with corresponding salinities from 0.6 to 4.6 wt.% NaCl equivalent. The homogenization temperatures of the aqueous fluid inclusions mainly range from 164°C to 249°C, with salinities from 7.2 to 20.2 wt.% NaCl equivalent. These characteristics of fluid inclusions are significantly different from those of basinal mineralization systems, but similar to those of orogenic or magmatic mineralization systems. The H and O isotope compositions suggest that the ore‐forming fluid is predominantly derived from magmatic water, with the participation of basinal brine. The δ34S values are widely variable between ?9.7 ‰ and 9.7 ‰, with a mode distribution around zero, which may be interpreted by the variation in physico‐chemical conditions or by compositional variation of the sources. The mixing of a deeply sourced CO2‐rich fluid with basinal brine was the key mechanism responsible for the mineralization of the Jinman deposit.  相似文献   

2.
Melt inclusions and aqueous fluid inclusions in quartz phenocrysts from host felsic volcanics, as well as fluid inclusions in minerals of ores and wall rocks were studied at the Cu-Zn massive sulfide deposits in the Verkhneural’sk ore district, the South Urals. The high-temperature (850–1210°C) magmatic melts of volcanic rocks are normal in alkalinity and correspond to rhyolites of the tholeiitic series. The groups of predominant K-Na-type (K2O/Na2O = 0.3–1.0), less abundant Na-type (K2O/Na2O = 0.15–0.3), and K-type (K2O/Na2O = 1.9–9.3) rhyolites are distinguished. The average concentrations (wt %) of volatile components in the melts are as follows: 2.9 H2O (up to 6.5), 0.13 Cl (up to 0.28), and 0.09 F (up to 0.42). When quartz was crystallizing, the melt was heterogeneous, contained magnetite crystals and sulfide globules (pyrrhotite, pentlandite, chalcopyrite, bornite). High-density aqueous fluid inclusions, which were identified for the first time in quartz phenocrysts from felsic volcanics of the South Urals, provide evidence for real participation of magmatic water in hydrothermal ore formation. The fluids were homogenized at 124–245°C in the liquid phase; the salinity of the aqueous solution is 1.2–6.2 wt % NaCl equiv. The calculated fluid pressure is very high: 7.0–8.7 kbar at 850°C and 5.1–6.8 kbar at 700°C. The LA-ICP-MS analysis of melt and aqueous fluid inclusions in quartz phenocrysts shows a high saturation of primary magmatic fluid and melt with metals. This indicates ore potential of island-arc volcanic complexes spatially associated with massive sulfide deposits. The systematic study of fluid inclusions in minerals of ores and wall rocks at five massive sulfide deposits of the Verkhneural’sk district furnished evidence that ore-forming fluids had temperature of 375–115°C, pressure up to 1.0–0.5 kbar, chloride composition, and salinity of 0.8–11.2 (occasionally up to 22.8) wt % NaCl equiv. The H and O isotopic compositions of sericite from host metasomatic rocks suggest a substantial contribution of seawater to the composition of mineral-forming fluids. The role of magmatic water increases in the central zones of the feeding conduit and with depth. The dual nature of fluids with the prevalence of their magmatic source is supported by S, C, O, and Sr isotopic compositions. The TC parameters of the formation of massive sulfide deposits are consistent with the data on fluid inclusions from contemporary sulfide mounds on the oceanic bottom.  相似文献   

3.
《Resource Geology》2018,68(1):37-50
The large, newly discovered Lijiagou pegmatite spodumene deposit, is located southeast of the Ke'eryin pegmatite ore field, in the central Songpan–Garze Fold Belt (SGFB), Eastern Tibet. The Lijiagou albite spodumene pegmatites are unzoned, granite‐pegmatites of the subtype LCT (Lithium, Cesium, and Tantalum) and consist of medium‐ to coarse‐grained spodumene, lepidolite, microcline, albite, quartz, muscovite, and accessory amounts of beryl, cassiterite, columbite–tantalite and zircon. Secondary fluid inclusions in quartz and spodumene include two‐phase aqueous inclusions (V + L), mono‐phase vapor inclusions (V); three‐phase CO2‐rich CO2–H2O inclusions (CO2 + V + L) and less abundant liquid inclusions (L). The homogenization temperature of the fluid inclusions are low (257.3 to 204.3°C in early stage, 250.3 to 199.6°C in middle stage, 218.7 to 200.6°C in late stage). Fluid inclusions were formed during the long cooling period from the temperature of the pegmatite emplacement. Liquid–vapor–gas boiling was extensive during the middle and late stages. The salinity of the corresponding stages are 15.4 to 13.0 wt.% NaCl equiv., 12.5 to 9.1 wt.% NaCl equiv. and 9.8 to 7.8 wt.% NaCl equiv., respectively. δ18O values of fluid are 7.2 to 5.2‰, 5.6 to 3.9‰ and 2.7 to −0.2‰ from early to late stages; and δD range from −75.1 to −76.8‰, −59.0 to −73.5‰ and −61.6 to −85.5‰ respectively. The δ13C of CO2 values are −5.6 to −6.6‰, −8.5 to −19.9‰, −11.8 to −18.7‰ from early to late stages, suggesting that CO2 in the fluids were probably sourced from a magmatic system, possibly with some mixing of CO2 dissolved in groundwater. δD and δ18O values of fluid indicate that the fluids were originally magmatic water and mixed with some meteoric water in late stage. The magma evolution sequence in the Ke'eryin orefield, from the central two‐mica granite through the Lijiagou deposit out to the distal pegmatites, with the ages gradually decreasing, indicates that the Ke'eryin complex rocks are the product of multistage magmatic activity. The large Lijiagou spodumene deposit is a typical magmatic, fractional crystallization related pegmatite deposit.  相似文献   

4.
The Zhawulong granitic pegmatite lithium deposit is located in the Ganzi-Songpan orogenic belt. Fluid inclusions in spodumene and coexisting quartz were studied to understand the cooling path and evolution of fluid within albite–spodumene pegmatite. There are three distinguishable types of fluid inclusions: crystal-rich, CO2–NaCl–H2O, and NaCl–H2O. At more than 500°C and 350~480 MPa, crystal-rich fluid inclusions were captured during the pegmatitic magma-hydrothermal transition stage, characterized by a dense hydrous alkali borosilicate fluid with a carbonate component. Between 412°C and 278°C, CO2–NaCl–H2Ofluid inclusions developed in spodumene (I) and quartz (II) with a low salinity (3.3–11.9 wt%NaCl equivalent) and a high volatile content, which represent the boundary between the transition stage and the hydrothermal stage. The subsequentNaCl–H2Ofluid inclusions from the hydrothermal stage, between 189°C and 302°C, have a low salinity (1.1–13.9 wt%NaCl equivalent). The various types of fluid inclusions reveal the P–T conditions of pegmatite formation, which marks the transition process from magmatic to hydrothermal. The ore-forming fluids from the Zhawulong deposit have many of the same characteristics as those from the Jiajika lithium deposit. The ore-forming fluid provided not only materials for crystallization of rare metal minerals, such as spodumene and beryl, but also the ideal conditions forthe growth of ore minerals. Therefore, this area has favorable conditions for lithium enrichment and excellent prospecting potential.  相似文献   

5.
The Xiaojiashan tungsten deposit is located about 200 km northwest of Hami City, the Eastern Tianshan orogenic belt, Xinjiang, northwestern China, and is a quartz vein‐type tungsten deposit. Combined fluid inclusion microthermometry, host rock geochemistry, and H–O isotopic compositions are used to constrain the ore genesis and tectonic setting of the Xiaojiashan tungsten deposit. The orebodies occur in granite intrusions adjacent to the metamorphic crystal tuff, which consists of the second lithological section of the first Sub‐Formation of the Dananhu Formation (D2d 12). Biotite granite is the most widely distributed intrusive bodies in the Xiaojiashan tungsten deposit. Altered diorite and metamorphic crystal tuff are the main surrounding rocks. The granite belongs to peraluminous A‐type granite with high potassic calc‐alkaline series, and all rocks show light Rare Earth Element (REE)‐enriched patterns. The trace element characters suggest that crystallization differentiation might even occur in the diagenetic process. The granite belongs to postcollisional extension granite, and the rocks formed in an extensional tectonic environment, which might result from magma activity in such an extensional tectonic environment. Tungsten‐bearing quartz veins are divided into gray quartz vein and white quartz veins. Based on petrography observation, fluid inclusions in both kinds of vein quartz are mainly aqueous inclusions. Microthermometry shows that gray quartz veins have 143–354°C of Th, and white quartz veins have 154–312°C of Th. The laser‐Raman test shows that CO2 is found in fluid inclusions of the tungsten‐bearing quartz veins. Quadrupole mass spectrometry reveals that fluid inclusions contain major vapor‐phase contents of CO2, H2O. Meanwhile, fluid inclusions contain major liquid‐phase contents of Cl?, Na+. It can be speculated that the ore‐forming fluid of the Xiaojiashan tungsten deposit is characterized by an H2O–CO2, low salinity, and H2O–CO2–NaCl system. The range of hydrogen and oxygen isotope compositions indicated that the ore‐forming fluids of the tungsten deposit were mainly magmatic water. The ore‐forming age of the Xiaojiashan deposit should to be ~227 Ma. During the ore‐forming process, the magmatic water had separated from magmatic intrusions, and the ore‐bearing complex was taken to a portion where tungsten‐bearing ores could be mineralized. The magmatic fluid was mixed by meteoric water in the late stage.  相似文献   

6.
Relicts of silicate-iron fluid media were found in the Early Cretaceous rhyolites of the Nilginskaya depression, Central Mongolia. They are localized in matrix cavities and in the inclusions in quartz and sanidine phenocrysts. The mineral composition of rhyolites and aggregates of silicate-iron phases has been studied. Calculations showed that crystallization of ilmenite and magnetite in a matrix occurred within a temperature range of 593–700°C and oxygen fugacity $\Delta \log f_{O_2 }$ NNO from ?2.29 to 1.68. The average compositions of the rhyolites and residual glasses in melt inclusions (MI) have A/CNK index of 1.03–1.05. The compositions of MI glasses define a trend from agpaitic to plumasitic types (A/NK and A/CNK change from 0.8–0.9 to 1.1–1.2). According to calculations, the rhyolitic melt was solidified at 640–750°C. Based on cathodoluminescent study, inclusions with silicate-iron phases are observed separately or together with MI in the early and intermediate growth zones of quartz and sanidine crystals. Aggregates found in the inclusions are represented by loose matter consisting of silica with small admixture of Al, Na, K, and Cl; silicate-iron aggregates with wide variations of Fe and Si; essentially Fe-rich micaceous and mica-silicate-iron aggregates. They usually have variable composition (wt %): 30–60 SiO2, 10–25 Al2O3, 10–30 FeO, up to 3 TiO2, 1.5–4 MgO, up to 3 CaO, up to 3 Na2O, up to 3 K2O, and up to 4 P2O5. They presumably contain up to 10–15 wt % H2O. Some inclusions comprise large segregations of siderophyllite enriched in F (3–10 wt %) and Cl (0.1–3.3 wt %). Evolution of the rhyolitic melt from magmatic chamber to its vitrification after ejection led to the decrease of F content. The highest F content (1–1.8 wt %) is typical of MI glasses, while the lowest content (0.05–0.1 wt %) was found in the glassy matrix and rhyolitic samples. The melt degassing was accompanied by the release of F-rich fluid containing up to 1.3 wt % F (based on partition coefficient fluid/meltDF) or 0.2–0.8 mol/dm3 HF (based on composition of micas from matrix and inclusions). Segregations of silicate-iron media existed in the rhyolitic magma. During formation of rhyolitic pile, these media were in a liquid state. The silicate-iron fluid media captured in MI could not be true fluids or silicate melts. They were likely formed during fluid-magmatic interaction and transformation of fluid phases of different density (vapor and liquid true solutions) that existed in a F-rich melt. The high concentrations of F and Cl and elevated alkalinity of fluids contribute their enrichment in silica and other elements, which could lead to the formation of hydrosilicate liquids. It is suggested that such liquids (gels) in dispersed (colloidal) state extracted F and many trace elements (P, Ti, Mg, Ca, REE, As, Nb, Th, and V) from surrounding rhyolitic magma.  相似文献   

7.
Fluid inclusion studies of 5 gold deposits connected with alkaline rocks show that quartz separated from auriferous quartz veins contains abundant three-phase CO2-NaCl-H2O inclusions and two-phase CO2-dominated ones,measuring 5-20um in diameter,Homogenization temperatures of the fluid inclusions are mostly within the range of 150-300℃,and the salinities,mainly 0.2wt%-12 wt%(NaCl),Gold mineralizations occurred at depths of 1.4-2.8km,The most striking character of fluid composition is that among the cations,Na^ in dominant,followed by K^ ,Ca^2 ,among the anions,Cl^- is slightly higher than SO4^2-,In the evaporate,H2O is dominant,followed by CO2,The pH values are mainly within the range of 6.5-8.5,indicating that the ore-forming solutions are alkaline in nature.The hydrogen and oxygen isotopic ratios indicate that the ore fluid is composed mainly of magmatic water.With the dropping of temperature in the ore fluid,the contents of CO2 decreased while the salinity increased.The relations between Au and other components of the ore fluid are discussed in the paper,and it is concluded that in these deposits,Chlorides,H2S,SiO2,CO2,etc.in the fluid all are involved in the migration and concentration of Au.  相似文献   

8.
The Zhuanshanzi gold deposit lies in the eastern section of the Xingmeng orogenic belt and the northern section of the Chifeng‐Chaoyang gold belt. The gold veins are strictly controlled by a NW‐oriented shear fault zone. Quartz veins and altered tectonic rock‐type gold veins are the main vein types. The deposits can be divided into four mineralization stages, and the second and third metallogenic stages are the main metallogenic stages. In this paper, based on the detailed field geological surveys, an analysis of the orebody and ore characteristics, microtemperature measurement of fluid inclusions, the Laser Raman spectrum of the inclusions, determination of C? H? O? S? Pb isotopic geochemical characteristics, and so on were carried out to explore the origin of the ore‐forming fluids, ore‐forming materials, and the genesis of the deposits. The results show that the fluid inclusions can be divided into four types: type I – gas–liquid two‐phase inclusions; type II – gas‐rich inclusions; type III– liquid inclusions; and type IV – CO2‐containing three‐phase inclusions. However, they are dominated by type Ib – gas liquid inclusions and type IV – three‐phase inclusions containing CO2. The gas compositions are mainly H2O and CO2, indicating that the metallogenic system is a CO2? H2O? NaCl system. The homogenization temperature of the ore‐forming fluid evolved from a middle temperature to a low temperature, and the temperature of the fluid was further reduced due to meteoric water mixing during the late stage, as well as a lack of CO2 components, and eventually evolved into a simple NaCl? H2O hydrothermal system. C? H? O? S? Pb isotope research proved that the ore‐forming fluids are mainly magmatic water during the early stage, with abundant meteoric water mixed in during the late stage. Ore‐forming materials originated mostly from hypomagma and were possibly influenced by the surrounding rocks, suggesting that the ore‐forming materials were mainly magmatic hydrothermal deposits, with a small amount of crustal component. The fluid immiscibility and the CO2 and CH4 gases in the fluids played an active and important role in the precipitation and enrichment of Au during different metallogenic stages. The deposit is considered a magmatic hydrothermal deposit of middle–low temperature.  相似文献   

9.
The authors have studied melt-fluid and fluid inclusions in quartz and fluorite of sideritic and ankerite-calcitic carbonatites of the Karasug ore field, as well as melt inclusions in apatite from granosyenites. The content of salt and fluid components in brine-melt inclusions was evaluated on the basis of the thermodynamic data, the calculations of volumes and densities of the solid phases, a solution of about 50% concentration, and the gas phase of the inclusions, as well as the results of the LA-ICP-MS analysis. The content of salt phases, the solution, and the gas phase amounted to 85–70, 10–25, and about 5% of the inclusion substance, respectively. The total percentage of salt and fluid components (H2O and CO2) amounted to 90–80 and 10–20 wt %, respectively. The fraction of a carbonate constituent in the inclusions was as high as 45–50% and over in ankerite-calcite carbonatites and about 15 wt % in sideritic carbonatites. The 117.2 ± 1.3 Ma age of these carbonatites by 40Ar/39Ar, along with other datings for this area, shows that their formation was associated with a manifestation of the Cretaceous alkaline-mafic magmatism (117–120 Ma). The presented model of the formation of carbonatites is in agreement with the sequence of the development of magmatic processes and mineralization in this area. The model is also confirmed by the results of the studies of melt and fluid inclusions in minerals.  相似文献   

10.
The Bujinhei Pb–Zn deposit is located in the southern Great Xing'an Range metallogenic belt. It is a representative medium‐ to high‐temperature hydrothermal vein type deposit controlled by fractures, and orebodies hosted in the Permian Shoushangou Formation. The hydrothermal mineralization is classified into three stages: pyrite ± arsenopyrite–quartz (Stage 1), polymetallic sulfide–quartz (Stage 2), and polymetallic sulfide–calcite (Stage 3). Fluid inclusion petrography, laser Raman analyses and microthermometry indicate that the liquid‐rich aqueous inclusions (L) and vapor‐rich CO2 ± CH4–H2O inclusions (C) occur in the Stage 1 and as medium‐ to high‐ temperature and low‐ to medium‐salinity NaCl–H2O–CO2–CH4 hydrothermal fluids. The liquid‐rich (L) and rare vapor‐rich CO2 ± CH4–H2O inclusions (C) occur in the Stage 2 with medium‐temperature and low‐salinity NaCl–H2O ± CO2 ± CH4 hydrothermal fluids. The exclusively liquid‐rich (L) fluid inclusions are observed in the Stage 3, and the hydrothermal fluid belongs to medium‐temperature and low‐salinity NaCl–H2O hydrothermal fluids. The results of hydrogen and oxygen isotope analyses indicate that ore‐forming fluids were initially derived from the magmatic water and mixed with local meteoric water in the late stage (δ18OH2O‐SMOW = 6.0 to 2.2‰, δDSMOW = ?103 to ?134‰). The carbon isotope compositions (?18.4‰ to ?26.5‰) indicate that the carbon in the fluid was derived from the surrounding strata. The sulfur isotope compositions (5.7 to 15.2‰) indicate that the ore sulfur was also primarily derived from the strata. The ore vein No. 1 occurs in fractures and approximately parallel to the rhyolite porphyry; orebodies have a close spatial and temporal relationship with the rhyolite porphyry. The rhyolite porphyry yielded a crystallization age of 122.9  ± 2.4 Ma, indicating that the Bujinhei deposit may be related to the Early Cretaceous magmatic event. Geochemical analyses reveal that the Bujinhei rhyolite porphyry is high in K2O and peraluminous, and derived from an acidic liquid as a result of strong interaction with hydrothermal fluid during the late magmatic stage; it is similar to A2‐type granites, and formed in a backarc extensional environment. These results indicate that the Bujinhei Pb–Zn deposit was a vein type system that formed in Early Cretaceous and influenced by the Paleo‐Pacific tectonic system. Bujinhei deposit is a representative hydrothermal vein type deposit on the genetic types, and occurs on the western slope of the southern Great Xing'an Range. The ore‐forming fluids were medium‐ to high‐temperature and low‐to medium‐salinity NaCl–H2O–CO2–CH4 hydrothermal fluids, which became medium‐temperature and low‐salinity NaCl–H2O hydrothermal fluids in later stages, and came from magmatic water and mixed with meteoric water, whereas the ore‐forming materials were mainly derived from the surrounding strata. The LA–ICP–MS zircon U–Pb dating indicates that the Bujinhei deposit formed at the period of late Early Cretaceous, potentially in a backarc extensional environment influenced by the Paleo‐Pacific tectonic system.  相似文献   

11.
A fluid inclusion study was completed on syn-deformational quartz veins of the Pote River Shear Zone, which is situated on the border between the Harare-Bindura greenstone belt and the granitoids of the Chinamora Batholith. The fluid inclusions were studied by means of microthermometry and Laser-Raman microspectrometry. The fluid inclusions consist of three major compositional types: (1) H2OCO2±N2±halite inclusions in clusters and trails; (2) H2OCO2 inclusions (H2O = 30–60 vol. %) in trails; and (3) H2O-halite inclusions in trails. These fluid generations are explained by trapping at different P-T conditions of two different fluids: a high salinity aqueous fluid and a low salinity H2OCO2 fluid with XH2O around 0.8. High salinity aqueous fluid inclusions are characteristic for the granite-greenstone contact and are absent within the Harare-Shamva-Bindura greenstone belt. The high salinity aqueous fluid has, therefore, been interpreted as magmatic in origin. The low salinity H2OCO2 fluid is most likely metamorphic in origin.  相似文献   

12.
The Wangfeng gold deposit is located in Western Tian Shan and the central section of the Central Asian Orogenic Belt (CAOB). The deposit is mainly hosted in Precambrian metamorphic rocks and Caledonian granites and is structurally controlled by the Shenglidaban ductile shear zone. The gold orebodies consist of gold-bearing quartz veins and altered mylonite. The mineralization can be divided into three stages: quartz–pyrite veins in the early stage, sulfide–quartz veins in the middle stage, and quartz–carbonate veins or veinlets in the late stage. Ore minerals and native gold mainly formed in the middle stage. Four types of fluid inclusions were identified based on petrography and laser Raman spectroscopy: CO2–H2O inclusions (C-type), pure CO2 inclusions (PC-type), NaCl–H2O inclusions (W-type), and daughter mineral-bearing inclusions (S-type). The early-stage quartz contains only primary CO2–H2O fluid inclusions with salinities of 1.62 to 8.03 wt.% NaCl equivalent, bulk densities of 0.73 to 0.89 g/cm3, and homogenization temperatures of 256 °C–390 °C. Vapor bubbles are composed of CO2. The middle-stage quartz contains all four types of fluid inclusions, of which the CO2–H2O and NaCl–H2O types yield homogenization temperatures of 210 °C–340 °C and 230 °C–300 °C, respectively. The CO2–H2O fluid inclusions have salinities of 0.83 to 9.59 wt.% NaCl equivalent and bulk densities of 0.77 to 0.95 g/cm3, with vapor bubbles composed of CO2, CH4, and N2. Fluid inclusions in the late-stage quartz are NaCl–H2O solution with low salinities (0.35–3.87 wt.% NaCl equivalent) and low homogenization temperatures (122 °C–214 °C). The coexistence of inclusions of these four types in middle-stage quartz suggests that fluid boiling occurred in the middle-stage mineralization. Trapping pressures estimated from CO2–H2O inclusions are 110–300 MPa and 90–250 MPa for the early and middle stages, respectively, suggesting that gold mineralization mainly occurred at depths of about 10 km. In general, the Wangfeng gold deposit originated from a metamorphic fluid system characterized by low salinity, low density, and enrichment of CO2. Depressurized fluid boiling caused gold precipitation. Given the regional geology, ore geology, fluid-inclusion features, and ore-forming age, the Wangfeng gold deposit can be classified as a hypozonal orogenic gold deposit.  相似文献   

13.
The Ciemas gold deposit is located in West Java of Indonesia,which is a Cenozoic magmatism belt resulting from the Indo-Australian plate subducting under the Eurasian plate.Two different volcanic rock belts and associated epithermal deposits are distributed in West Java:the younger late Miocene-Pliocene magmatic belt generated the Pliocene-Pleistocene epithermal deposits,while the older late Eocene-early Miocene magmatic belt generated the Miocene epithermal deposits.To constrain the physico-chemical conditions and the origin of the ore fluid in Ciemas,a detailed study of ore petrography,fluid inclusions,laser Raman spectroscopy,oxygen-hydrogen isotopes for quartz was conducted.The results show that hydrothermal pyrite and quartz are widespread,hydrothermal alteration is well developed,and that leaching structures such as vuggy rocks and extension structures such as comb quartz are common.Fluid inclusions in quartz are mainly liquid-rich two phase inclusions,with fluid compositions in the NaCl-H20 fluid system,and contain no or little CO_2.Their homogenization temperatures cluster around 240℃-320℃,the salinities lie in the range of 14-17 wt.%NaCl equiv,and the calculated fluid densities are 0.65-1.00 g/cm~3.The values of δ~(18)O_(H2O-VSMOW)for quartz range from +5.5‰ to +7.7‰,the δD_(VSMOW) of fluid inclusions in quartz ranges from-70‰ to-115‰.All of these data indicate that mixing of magmatic fluid with meteoric water resulted in the formation of the Ciemas deposit.A comparison among gold deposits of West Java suggests that Miocene epithermal ore deposits in the southernmost part of West Java were more affected by magmatic fluids and exhibit a higher degree of sulfldation than those of Pliocene-Pleistocene.  相似文献   

14.
Melt and fluid inclusions have been studied in olivine phenocrysts (Fo 81–79) from trachybasalts of the Southern Baikal volcanic area, Dzhida field. The melt inclusions were homogenized, quenched, and analyzed on an electron and ion microprobe. The study of homogenized glasses of nine inclusions showed that basaltic melts (SiO2 = 47.1–50.3 wt %, MgO = 5.0–7.7 wt %, CaO = 7.1–11.1 wt %) have high contents of Al2O3 (17.1–19.6 wt %), Na2O (4.1–6.2 wt %), K2O (2.2–3.3 wt %), and P2O5 (0.6–1.1 wt %). The volatile contents are low (in wt %): 0.24–0.31 H2O, 0.08 F, 0.03 Cl, and 0.02 S. Primary fluid inclusions in olivines from four trachybasalt samples contain high-density CO2 (0.73–0.87 g/cm3), indicating a CO2 fluid pressure of 4.3–6.6 kbar at 1200–1300°C and olivine crystallization depths of 16–24 km. Ion microprobe analyses of 20 glasses from melt inclusions for trace elements showed that the magmas of the Baikal rift were enriched in incompatible elements, thus differing from oceanic rift basalts and resembling oceanic island basalts. A comparison of our data on melt and fluid inclusions in olivine from trachybasalts of the Dzhida field with preexisting data on the Eastern Tuva volcanic highland in the Southern Baikal volcanic area showed that they had similar contents of volatiles, major, and trace elements.  相似文献   

15.
The Olympias Pb-Zn(Au, Ag) sulfide ore deposit, E. Chalkidiki, N. Greece, is hosted by marbles of the polymetamorphic Kerdilia Formation of Paleozoic or older age. The geologic environment of the ore also comprises biotite-hornblende gneisses and amphibolites intruded by Tertiary pegmatite-aplite dikes, lamprophyre dikes, the 30-Ma Stratoni granodiorite, and porphyritic stocks. Only limited parts of the deposit display shear folding and brecciation; most of it is undeformed. Microthermometry of fluid inclusions in gangue syn-ore quartz indicates three types of primary and pseudosecondary inclusions: (1) H2O-rich, 1–18 wt.% NaCl equivalent, <3.6 mol% CO2; (2) H2O-CO2 inclusions, <4wt.% NaCl equivalent, with variable CO2 contents, coexisting in both undeformed and deformed ore; (3) aqueous, highsalinity (28–32 wt,% NaCl equivalent) inclusions found only in undeformed ore. Type 2 inclusions are differentiated into two sub-types: (2a) relatively constant CO2 content in the narrow range of 8–15 mol% and homogenization to the liquid phase; (2b) variable CO2 content between 18 and 50 mol% and homogenization to the vapor phase. Type 1 and 2b inclusions are consistent with trapping of two fluids by unmixing of a high-temperature, saline, aqueous, CO2-bearing fluid of possible magmatic origin, probably trapped in type 2a inclusions. Fluid unmixing and concomitant ore mineralization took place at temperatures of 350 ± 30 °C and fluctuating pressures of less than 500 bar, for both undeformed and deformed ores. The wide salinity range of type 1 inclusions probably represents a complex effect of salinity increase, due to fluid unmixing and volatile loss, and dilution, due to mixing with low-salinity meteoric waters. High solute enrichment of the residual liquid, due to extreme volatile loss during unmixing, may account for high salinity type 3 inclusions. The Olympias fluid inclusion salinity-temperature gradients bear similarities to analogous gradients related to Pb-Zn ores formed in “granite”-hosted, low-T distalskarn, skarn-free carbonate-replacement and epithermal environments.  相似文献   

16.
A granite‐related scheelite deposit has been recently discovered in the Wuyi metallogenic belt of southeast China. The veinlet–disseminated scheelite occurs mainly in the inner and outer contact zones of the porphyritic biotite granite, spatially associated with potassic feldspathization and silicification. Re–Os dating of molybdenite intergrowths with scheelite yield a well‐constrained isochron age of 170.4 ± 1.2 Ma, coeval with the LA–MC–ICP–MS concordant zircon age of porphyritic biotite granite (167.6 ± 2.2 Ma), indicating that the Lunwei W deposit was formed in the Middle Jurassic (~170 Ma). We identify three stages of ore formation (from early to late): (I) the quartz–K‐feldspar–scheelite stage; (II) the quartz–polymetallic sulfide stage; and (III) the quartz–carbonate stage. Based on petrographic observations and microthermometric criteria, the fluid inclusions in the scheelite and quartz are determined to be mainly aqueous two‐phase (liquid‐rich and gas‐rich) fluid inclusions, with minor gas‐pure and CO2‐bearing fluid inclusions. Ore‐forming fluids in the Lunwei W deposit show a successive decrease in temperature and salinity from Stage I to Stage III. The homogenization temperature decreases from an average of 299 °C in Stage I, through 251 °C in Stage II, to 212 °C in Stage III, with a corresponding change in salinity from an average of 5.8 wt.%, through 5.2 wt.%, to 3.4 wt.%. The ore‐forming fluids have intermediate to low temperatures and low salinities, belonging to the H2O–NaCl ± CO2 system. The δ18OH2O values vary from 1.8‰ to 3.3‰, and the δDV‐SMOW values vary from –66‰ to –76‰, suggesting that the ore‐forming fluid was primarily of magmatic water mixed with various amounts of meteoric water. Sulfur isotope compositions of sulfides (δ34S ranging from –1.1‰ to +2.4‰) and Re contents in molybdenite (1.45–19.25 µg/g, mean of 8.97 µg/g) indicate that the ore‐forming materials originated mainly in the crust. The primary mechanism for mineral deposition in the Lunwei W deposit was a decrease in temperature and the mixing of magmatic and meteoric water. The Lunwei deposit can be classified as a porphyry‐type scheelite deposit and is a product of widespread tungsten mineralization in South China. We summarize the geological characteristics of typical W deposits (the Xingluokeng, Shangfang, and Lunwei deposits) in the Wuyi metallogenic belt and suggest that porphyry and skarn scheelite deposits should be considered the principal exploration targets in this area.  相似文献   

17.
A microthermometric study of inclusions in granites and pegmatites in the Proterozoic Harney Peak Granite system identified four types of inclusions. Type 1 inclusions are mixtures of CO2 and H2O and have low salinities, on average 3.5 wt.% NaCleq; type 2 inclusions are aqueous solutions of variable salinities, from 0 to 40% wt.% NaCleq; type 3 inclusions are carbonic, dominated by CO2, with no detectable water; and type 4 inclusions consist of 20 to 100% solids, with the remaining volume occupied by a CO2-H2O fluid. Many inclusions have a secondary character; however, a primary character can be unambiguously established in several occurrences of the type 1 inclusions. These inclusions were trapped above the solidus and represent the exsolved magmatic fluid. The secondary populations of types 1, 2, and 3 probably formed as a result of reequilibration and unmixing of the type 1 fluid that progressively changed composition and density with decreasing temperature and pressure and was finally trapped along healed microfractures under subsolidus conditions. Type 4 inclusions are primary and are interpreted to be trapped, fluid-bearing, complex silicate melts that subsequently solidified or underwent other posttrapping changes.It is demonstrated that primary type 1 fluid inclusions that coexist with crystallized melt inclusions in the complex, Li-bearing Tin Mountain pegmatite were trapped along the two-fluid phase boundary in the system CO2-H2O-NaCleq. Consequently, the temperature and pressure conditions of trapping are identical to the bulk homogenization conditions—on average 340°C and 2.7 kbar. These conditions indicate that this Li-, Cs-, Rb-, P-, and B-rich pegmatite crystallized at some of the lowest known temperatures for a silicate melt in the crust. An internally consistent, empirical solvus surface in P-T-XCO2 coordinates was generated for the pseudobinary CO2-(H2O-4.3 wt.% NaCleq) pegmatite fluid system. Distribution coefficients for the major species CO2, H2O, NaCl, and CH4 between the immiscible CO2-rich and H2O-rich fluid phases as a function of pressure and temperature were extracted from data for the two cogenetic fluid inclusions types.  相似文献   

18.
The mass of volatiles emitted during volcanic eruptions is often estimated by comparing the volatile contents of undegassed melt inclusions, trapped in crystals at an early stage of magmatic evolution, with that of the degassed matrix glass. Here we present detailed characterisation of magmatic volatiles (H2O, CO2, S, Fl and Cl) of crystal-hosted melt and fluid inclusions from the 2014–2015 Holuhraun eruption of the Bárðarbunga volcanic system, Iceland. Based on the ratios of magmatic volatiles to similarly incompatible trace elements, the undegassed primary volatile contents of the Holuhraun parental melt are estimated at 1500–1700 ppm CO2, 0.13–0.16 wt% H2O, 60–80 ppm Cl, 130–240 ppm F and 500–800 ppm S. High-density fluid inclusions indicate onset of crystallisation at pressures?≥?0.4 GPa (~?12 km depth) promoting deep degassing of CO2. Prior to the onset of degassing, the melt CO2 content may have reached 3000–4000 ppm, with the total magmatic CO2 budget estimated at  23–55 Mt. SO2 release commenced at 0.12 GPa (~?3.6 km depth), eventually leading to entrapment of SO2 vapour in low-density fluid inclusions. We calculate the syn-eruptive volatile release as 22.2 Mt of magmatic H2O, 5.9–7.7 Mt CO2, and 11.3 Mt of SO2 over the course of the eruption; F and Cl release were insignificant. Melt inclusion constraints on syn-eruptive volatile release are similar to estimates made during in situ field monitoring, with the exception of H2O, where field measurements may be heavily biased by the incorporation of meteoric water.  相似文献   

19.
Tabular steeply dipping cassiterite‐bearing lodes in the Mount Wells region are hosted by lower greenschist fades metasediment of the Pine Creek Geosyncline within the contact aureole of late orogenic granitoids. The latter are predominantly I‐type, but S‐type phases are developed near the sediment‐granitoid contact.

Quartz, cassiterite, pyrite, arsenopyrite, chalcopyrite and pyrrhotite are the main minerals. Two types of lodes are present: (i) Sn‐quartz lodes containing 5–10 vol% sulphide minerals; and (ii) Sn‐sulphide lodes containing ～ 70 vol% sulphide minerals. At the surface, the former appear as normal quartz veins and the latter as hematite‐quartz breccia resulting from the collapse of original sulphide‐rich lodes as a consequence of volume reduction due to oxidation and leaching.

Two stages of quartz veining are recognized in both types of lodes. Cassiterite is present in stage I while stage II is composed of barren quartz with minor pyrite. Late stage III carbonate veinlets are present in Sn‐sulphide lodes. The lode‐wallrock contact is sharp with weak alteration effects confined to the fringe of the lodes. The alteration minerals include sericite, quartz, tourmaline, chlorite, pyrite and minor K‐feldspar.

Four types of fluid inclusions are present in vein quartz and cassiterite: Type A (CO2 ± H2O ± CH4); Type B (H2O+～ 20% vapour); Type C (H2O+ < 15% vapour) and Type D (H2O+ < 15% vapour + NaCl). Early ‘primary’ inclusions represented by Types A and B are present in stage I only and have a well‐defined temperature mode at ～300°C and a salinity range of 1–20 wt% eq NaCl. Types C and D inclusions are ‘secondary’ in stage I and primary in stage II and have a temperature mode at 120–160°C and salinities from about 1 to more than 26 wt% eq NaCl. Variable H2O‐CO2 ratios of Type A inclusions and homogenization in CO2 or H2O phase at near identical temperature indicate entrapment at the H2O‐CO2 solvus and define a pressure of ～ 100 MPa. The melting sequence of frozen inclusions suggests that the ore fluids were mainly H2O‐CO2‐CH4‐Na‐Ca‐Cl brines. This is also confirmed by Raman Laser Spectrometry.

Oxygen and sulphur isotope data are consistent with a magmatic origin of the ore fluids. The δD values are up to 20%0 higher than those expected for magmatic fluids and probably resulted from interaction of the latter with the carbonaceous strata. This interpretation is supported by δ13C data on the fluid inclusion CO2.

Fluid inclusions, stable isotope and mineralogical data are used to approximate the physico‐chemical parameters of the ore fluids which are as follows: T 300°C, m Cl～2, fO2 ～ 10‐35, mSS ～ 0.01, Sn ～ 1 ppm, Cu ～ 1 ppm and pH ～ 5.5.

It is suggested that fluids of granitic parentage interacted with the enclosing sediment and picked up CO2, CH4 and possibly Ca. The granitic phases became reduced due to this interaction and developed S‐type characteristics. Tin was probably partitioned into the CH4‐bearing reduced fluids. At some stage the fluid overpressure exceeded the lithostatic lode enforcing failure of the carapace and the intruded rocks by hydraulic fracturing causing CH4 and CO2 loss resulting in the precipitation of the ore minerals.  相似文献   

20.
Moreira Gomes is a recently discovered deposit (21.7 t Au) of the Cuiú-Cuiú goldfield, Tapajós Gold Province, Amazonian Craton. The mineralized zone is about 1200 m long, 30–50 m wide, and at least 400 m in depth. The zone is controlled by a subvertical, east–west-trending structure that is related to a left lateral strike-slip fault system. The host rocks are predominantly tonalites of the Creporizão Intrusive Suite (1997 ± 2 Ma) of uncertain tectonic setting (magmatic arc or post-collision). Hydrothermal alteration and mineralization are predominantly of the fissure-filling type and locally pervasive. Sericitization, chloritization, sulfidation, silicification, carbonatization and epidotization are the observed alteration types. Pyrite is the predominant sulfide mineral and bears inclusions of chalcopyrite, galena, sphalerite and minor hessite and bismuthinite. Gold occurs predominantly as inclusions in pyrite and subordinately in the free-milling state in quartz veins. Ag, Pb and Bi have been detected by semi-quantitative EDS analysis.Three types of fluid inclusions, hosted in quartz veins and veinlets, have been identified. (1) one- and two-phase CO2 inclusions; (2) two- and three-phase H2O–CO2-salt inclusions, and (3) two-phase H2O-salt inclusions. The CO2-bearing types are interpreted as the product of phase separation of an immiscible fluid. This fluid presents low to moderate density, low to moderate salinity (1.6–11.8 wt.% NaCl equivalent) and was trapped at 280° to 350 °C. The chemical system of the aqueous inclusions may contain CaCl2 and/or MgCl2, salinity varies from zero to 10.1 wt.% NaCl equivalent. Only locally salinities up to 25% have been recorded. This fluid was trapped between 120° and 220 °C and is interpreted as resulting from mixing of a hotter and more saline aqueous fluid (in part derived from phase separation of the H2O–CO2 fluid) with a cooler and dilute aqueous fluid.The δ34S values of pyrite (−0.3‰ to 3.9‰) are probably related to magmatic sulfur. The isotopic composition of inclusion fluids and of the fluid in equilibrium with hydrothermal minerals (quartz, chlorite, and calcite) show δ18O and δD values that range from +0.5 to +9.8‰, and from −49 to −8‰, respectively. Mineral pairs show equilibrium isotopic temperatures that are compatible with the fluid inclusion homogenization temperatures and with textural relationships of the hydrothermal minerals.Isotopic results combined with mineralogical and fluid inclusion data are interpreted to reflect a magmatic-hydrothermal system that evolved in at least three stages. (1) Exsolution of a CO2-bearing magmatic fluid between 400 °C and 320–350 °C and up to 2.1 kbar (6 km in depth) followed by phase separation and main precipitation of the hydrothermal assemblage composed of chlorite–sericite–pyrite–quartz-gold. (2) Cooling and continuous exsolution of CO2 produced a CO2-depleted and slightly more saline aqueous fluid that was trapped mainly at 250°–280 °C. The predominant hydrothermal assemblage of stage 1 continued to form, but epidote is the main phase at this stage. (3) Mixing of the stage 2 aqueous fluid with a cooler and dilute aqueous fluid of meteoric origin, which was responsible for the main carbonatization phase. The mineralizing fluid was neutral to slightly alkaline and relatively reduced. H2S (and/or HS-) might have been the main sulfur species in the fluid and Au(HS)2- was probably the gold transporting complex. Gold deposition occurred as a consequence of a combination of mechanisms, such as phase separation, mixing and fluid-rock interaction.The Moreira Gomes is a granite-hosted gold deposit that is interpreted to be a product of a magmatic-hydrothermal gold system. The age of ore formation (∼1.86 Ga) is consistent with the final stages of evolution of the widespread high-K, calc-alkaline Parauari Intrusive Suite, although the transitional to predominantly alkaline Maloquinha Intrusive Suite cannot be ruled out. Notwithstanding, the deposit does not show the classic features of (oxidized or reduced) intrusion-related gold deposits of Phanerozoic magmatic arcs.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号