共查询到20条相似文献，搜索用时 187 毫秒
1.
汶川5.12大地震发生后,在武都汉王地震台及其附近地区布置了2个大地电磁测深点,进行了两期余震序列的地震电磁效应连续监测,共观测到Ms4.0及以上的余震事件35次.通过与汉王强震台的地震记录数据中15个强震记录比较发现,与地震波相对应的地震同震电磁信号存在于所有的电场和磁场记录分量中,它们与地震波到达同步.地震破裂发生时的电磁辐射信号在记录数据中相比地震波达到观测点的电磁信号幅度要小得多,无法从观测数据识别出来.通过分析对比地震位移和同震电磁信号的关系,提出了地震电磁同震信号产生的地震波驱动机理,认为观测系统在地球基本磁场中随地面运动产生了地震同震电磁信号,并从观测的地震振动位移和电磁信号进行了验证. 相似文献
2.
5月12日汶川8.0级地震强余震观测的电磁同震效应 总被引：8，自引：2，他引：6
2008年5月12日汶川8.0级大地震发生后,在武都汉王地震台及其附近地区进行了为期22d的余震序列电磁异常连续监测,观测到多次余震事件的电磁同震现象。通过与汉王强震台的地震记录数据比较发现,同震信号存在于所有的电场和磁场记录分量中,它们与地震波的到达同步,而不是在地震发生的时刻出现。地震发生时的电磁辐射信号似乎在记录数据中有所显示,但是与地震波到达观测点时的电磁信号相比幅度要小得多 相似文献
3.
Based on the results of instrumental observations of geomagnetic variations caused by the propagation of seismic waves through a fault zone, the dependences between the amplitudes of the induced seismomagnetic effect and seismic signal as a function of distance r to the midline of the fault are obtained. For the first time, it is shown that the amplitude of the seismomagnetic effect is maximal in the fault damage zone. The phenomenological model describing the generation of magnetic signals by seismic waves propagating through the crushed rock in the tectonic fault zone is suggested. It is assumed that geomagnetic variations are generated by the changes in the electrical conductivity of the fragmented rocks as a result of the deformation of the rock pieces contacts. The amplitudes of the geomagnetic variations calculated from the model agree with the instrumental observations. 相似文献
4.
M. J. S. Johnston 《Surveys in Geophysics》1997,18(5):441-476
New observations of magnetic, electric and electromagnetic field variations, possibly related to recent volcanic and seismic events, have been obtained on Mt. Unzen in Japan, Reunion Island in Indian Ocean, the Long Valley volcanic caldera in California, and for faults in China and Russia, California and several other locations. For volcanic events, contributions from different physical processes can be identified during the various eruption stages. Slow processes (weeks to months) include near-surface thermal demagnetization effects, piezomagnetic effects, and effects from rotation/displacement of magnetized material. Rapid processes (seconds to days) include piezomagnetic effects from instantaneous stress redistribution with explosive eruptions and electrokinetic effects from rupture of high pressure fluid compartments commonly encountered in volcanic regions. For seismic events, the observed coseismic offsets are instantaneous, provided care has been taken to ensure sensors are insensitive to seismic shaking and are in regions of low magnetic field gradient. Simple piezomagnetic dislocation models based on geodetically and seismically determined fault parameters generally match the observed signals in size and sign. Electrokinetic effects resulting from rupture of fluid filled compartments at hydrostatic to lithostatic pore pressures can generate transient signals in the frequency band 100 Hz to 0.01 Hz. However, large-scale fluid driven processes are not evident in near-field measurements in the epicentral region minutes to weeks before large earthquakes. The subset of ionospheric disturbances generated by trapped atmospheric pressure waves (also termed gravity waves and/or acoustic waves, traveling ionospheric disturbances or TID's) that are excited by earthquakes and volcanic eruptions are common and propagate to great distances. These are known and expected consequences of earthquakes, volcanic explosions (and other atmospheric disturbances), that must be identified and their effects removed from VLF/ULF electromagnetic field records before associating new observations of ionospheric disturbances with earthquake activity. 相似文献
5.
迭部5.9级地震爆破地震波动力学特性的变化 总被引：4，自引：0，他引：4
本文利用遥测传输台网可见记录和磁带记录对厂坝炮爆破进行地震波动力学特性分析,发现各次爆破记录有一致性。对失真信号进行滤波处理,经凝聚函数分析证明了爆源的一致性。对1987年1月8日迭部Ms=5.9地震的分析,表明由于介质状态的改变,记录到的地震波优势频率向高频方向移动。在近震中有关台站上,地震波位移谱出现多峰与能量分散现象,拐角频率也向高频方向移动,振幅比呈现低—高—发震的形态。在地震前二十几天,主频处地震波衰减小,而震后明显变大。上述特征可能与该地震孕育过程中应力水平和介质状态变化有关。 相似文献
6.
在地震勘探中,有效地震波是在干扰背景上进行記录的,在記录上識別有效波一直是地震勘探的基本問題。本文中,我們假定地震脉冲是雷克对称形式的波漣,用随机过程分析法,討論了地震脉冲在平稳正态分布随机干扰影响下的幅度和相角分布函数及其它主要的統計特点,并指出地震脉冲波同相軸能够予以識别的条件,同相軸的可靠程度,能够予以識別的同相軸对应要求的最少地震脉冲波瞬时强度--門限值,并分析了用組合方法控制門限值的方法。 相似文献
7.
我国每天有数千趟高铁列车运行在两万多公里的高铁线路上,不但会引起高铁路基的振动,还会激发出地震波.地震检波器所接收到的数据中不仅包含窄带分立谱特性的高铁震源地震信号,还包含宽频带特性的背景信号.如何实现从检波器所接收到的高铁震源地震数据中分离出高铁震源地震信号和宽频带背景信号是准确利用该类信号的关键.考虑到高铁震源地震信号与宽频带信号在频率域明显的形态特征差异,本文首次将形态成分分析这种信号分离手段引入到高铁震源地震信号处理中,实现高铁震源地震信号的稀疏化建模并进而实现从接收数据中分离出高铁震源地震信号以及宽频带背景信号.对北京大学在中国南方某高铁沿线采集到的大量高铁震源地震数据进行处理,结果表明:采用形态成分分析并结合分块坐标松弛算法,能够实现实际采集高铁震源地震数据中的高铁震源地震信号和宽频带信号的分离. 相似文献
8.
A. V. Guglielmi 《Izvestiya Physics of the Solid Earth》2008,44(1):43-49
A review of studies devoted to the problem of exciting magnetic signals in the crust associated with the formation of the major rupture in an earthquake source and with the propagation of seismic waves was given in [Sgrigna et al., 2004]. However, this review contains incorrect citations from original papers and several erroneous statements concerning inertial and inductive mechanisms of conversion of the energy of rock motion into magnetic field energy. These mistakes are analyzed in the present paper. The formal and physical similarity between seismomagnetic waves in the crust and Alfvén waves in the magnetosphere is used in the analysis. A comparative analysis of the inertial and inductive mechanisms of seismomagnetic field generation is performed. The Cherenkov criterion of Alfvén wave generation due to the ionospheric effect of acoustic waves from earthquakes and explosions is derived. Attention is also given to nonlinear phenomena (nonlinearity of a mechanomagnetic conversion in the crust and anharmonicity and self-focusing of Alfvén waves in the magnetosphere). 相似文献
9.
R. P. Young S. Talebi D. A. Hutchins T. I. Urbancic 《Pure and Applied Geophysics》1989,129(3-4):455-474
Rockbursts and mining-induced seismic events have serious socio-economic consequences for the Canadian mining industry, as their mines are extended to greater depths. Automatic multichannel monitoring systems (Electro-Lab MP250s) are routinely, used to detect the arrival times of seismic waves radiated by mining-induced events and sensed on an array of single component transducers installed throughout a mine. These arrival times are then used to locate the events and produce maps of areas of high activity for use in mine planning and design. This approach has limitations in that, it does not allow a detailed analysis of source mechanisms, which could be extracted if whole waveform signals are recorded and analyzed.A major research project, sponsored by the Natural Sciences and Engineering Research Council of Canada (NSERC) with the collaboration of the Canadian mining industry, is aimed at enhancing existing mine seismic monitoring technology in Canada, in order to carry out more advanced processing of data to obtain fundamental scientific information on mining-induced seismic events This paper describes preliminary results from seismic monitoring experiments carried out in a hard rock nickel mine in Sudbury, Canada. Existing seismic monitoring instrumentation was enhanced with a low cost microcomputer-based whole waveform seismic acquisition system. Some of the signals recorded during this experiment indicate anisotropic wave propagation through the mine rock masses, as observed by the splitting of shear waves and the relative arrival of two shear waves polarized in directions which may be related to the structural fabric and/or state of stress in the rock mass. Analysis of compressional wave first motion shows the predominance of shear events, as indicated by focal mechanism studies and is confirmed by spectral analysis of the waveforms. The source parameters were estimated fro typical low magnitude localized microseismic events during the initial monitoring experiments. The seismic moment of these events varied between 106 N.m and 2.108 N.m. with a circular source radius of between 1 m and 2 m with an estimated stress drop of the order of 1 MPa. 相似文献
10.
N.G. Gamburzeva E.I. Luquet V.N. Nikolaevsky S.I. Oreshin I.P. Pasechnik 《Earth and Planetary Science Letters》1984,71(2):279-289
Seismic signals from large explosions recorded by Soviet seismic stations in the distance range from 100 to 2800 km during 12–14 years are analysed. Periodic variations of travel times and amplitudes of P and S waves corresponding to different boundaries in the lithosphere have been discovered. Characteristic periods are close to 2 and 6 years. Since the variations of amplitudes and velocities of seismic waves may be caused by dilatational deformations of rocks, the results obtained reveal a possible existence of slow tectonic stress waves. Tectonic waves were detected not only at seismically active zones but also at aseismic regions of the Russian and Kazakh platforms. At almost all seismic stations these variations increase with the seismic ray depth in the lithosphere. This increase can be explained by the presence of bending deformations and by their attenuation due to the rheological stratification of the lithosphere. Accordingly, the theory of Elsasser's waves is generalized to include bending deformations and the presence of stationary asthenosphere flows. 相似文献
11.
电磁驱动式可控震源在城市浅层地震勘探中所面临的最突出的困难是微弱的反射信号常常淹没在很强的背景噪声之中.为了提高地震记录的信噪比,可以利用多台可控震源阵列实施相位控制形成定向地震波束以增强地震波的能量.本文讨论这种相控阵震源的波束形成机制.引入了地震波场的边际能量密度的概念,利用地震波场的时间切片技术,对模型空间各个方向上的能量强度进行了定量分析.用有限差分法对相控阵震源Chirp信号扫描的地震响应进行了数值模拟.当定向地震波束的汇聚带与观测排列的空间范围相一致时,相控阵震源合成地震记录的能量强度要显著高于单个可控震源情形的能量强度,波形振幅的均匀性要明显优于常规组合激发震源情形波形振幅的均匀性. 相似文献
12.
We present a review of the principal methods used for the seismic detection and identification of active underwater volcanism, based on our experience in French Polynesia. In particular, we descrobe the 5-year activity in the Tahiti-Mehetia area, during which more than 32000 earthquakes were detected by the Polynesian network. We discuss the use of the following three types of seismic waves: conventional (mostly body waves), seismic tremor, andT waves propagated in the low-velocity acoustic channel of the ocean. For each of these waves, we discuss the principal characteristics of the signals, their spectral content, the type of information they provide on the activity of the volcano, and the various limitations faced by their use in detection or monitoring of underwater volcanic edifices. We present a review of the principal swarms monitored by the Polynesian network, and discuss their characterization as either volcanic or tectonic. 相似文献
13.
Monitoring of geophysical conditions of marine sedimentary basins is necessary for predicting seismic events and for adaptation of geothermal technologies for seismically active (as a rule) sea bottom geothermal areas. These conditions are characterized by seismo-hydro-electromagnetic (EM) geophysical field interaction in the presence of gravity. Based on the main physical principles, geophysical and petrophysical data, we formulate a mathematical model of seismo-hydro-EM interaction in a basin of a marginal sea and calculate the transformation of a seismic excitation in the upper mantle under the central part of the sea of Japan into the low-frequency (0.1 to 10 Hz) EM signals at the top of the sea bottom sedimentary layer, at the sea surface and in the atmosphere up to the lower boundary of the ionosphere. Physics of the EM generation and propagation process is shown including: generation of EM waves in the upper mantle layer M by a seismic wave from under M, spatial modulation of diffusive EM waves by a seismic wave, stopping of the EM wave arrived (before the seismic P wave) from the upper mantle at the top of the sediments because of the high electric conductivity of seawater (3.5 S/m), immediate penetration of the EM wave through the seawater thickness after the delayed seismic P wave shock into the sea bottom, and EM emission from the sea surface into the atmosphere. Let us note that the EM signal in the sea bottom sediments is the first measurable signal of a seismic activation of geological structures beneath the seafloor and this signal is protected by seawater from the influence ionosphere disturbances. Amplitude of the computed magnetic signals (300, 200, 50, and 30 pT at the ocean–atmosphere interface and at the height of 10, 30 and 50 km, respectively), their predominant frequency (0.25 Hz), the delay of the seismic P wave in regard to the magnetic signal for the receivers at the shore (20 s), the amplitude of temperature disturbances in sediments (up to 0.02 K), the parameters of the long (150 km) tsunami wave of a small (up to 20 cm) amplitude far from the shore and other values that characterize the seismo-hydro-EM process are of the orders observed. Recommendations for the EM monitoring of dynamic processes beneath seafloor geothermal areas are given. 相似文献
14.
讨论非平稳、非线性局域波信号分解方法的物理意义和自适应性,数值实现三种局域波分解算法,研究局域波分解在地震信号时频分析中的应用方法和实践.通过Hilbert变换得到地震信号时频分布特征,与Fourier变换谱物理意义不同.采用一定的计算策略,改善瞬时频率计算精度,突出瞬时频率属性的物理意义;将局域波分解同Wigner分布结合,计算地震信号基于局域波分解的Wigner分布,抑制交叉项.模型和实际地震数据试算结果表明实现算法的正确性和有效性.研究表明：在地震信号时频分析中采用局域波分解求Hilbert谱具有自适应性,时域和频域的分辨率也较高;而基于局域波分解的地震信号Wigner分布,保留Wigner分布优良特性,抑制交叉项方法简单易实现;局域波分解方法适合处理地震信号,值得进一步研究和推广. 相似文献
15.
In seismic exploration for coal data resolution is a fundamental problem. Modeling helps to understand those details of the geology that can be interpreted from the seismic image. For single seam exploration, the vertical resolution of a seismic section is defined by the bandwidth of the signals. If there are several seams, each seam acts as a high-pass filter for reflections and as a low-pass filter for transmitted waves. Synthetic seismograms show that reflections from deep seams have a low frequency content. Within a layered sequence of coal seams, many multiples are generated which disturb later primary reflections. The ratio of primaries to multiples depends on the frequency content of the seismic data and on the number of overlying seams. The multiple problem is more severe with high frequencies. Primary reflections from deep coal seams within a sequence can be detected only if low-frequency signals are used. However, the use of low-frequency signals reduces the resolution of the deeper data. 相似文献
16.
Influencing factors of seismic signals generated by un-tuned large volume airgun array in a land reservoir 总被引：7，自引：0，他引：7 
下载免费PDF全文
下载免费PDF全文 Meng Chen Wei Yang Weitao Wang Baoshan Wang Hongkui Ge Li Chen Yansheng Ding Jiyan Qiao Yong Chen 《地震科学（英文版）》2014,27(4):365-376
Un-tuned large volume airgun array in a water reservoir is recently proposed as a new way to generate seismic waves on land. It can be used to explore the earth velocity structure and its temporal variations as well. However, the characteristics of seismic signals (especially far-field signals) from an airgun array in a reservoir and its affecting factors (firing pressure, airgun towing depth, water level of the reservoir, etc.) has not been adequately studied. We analyzed the seismic data collected from field experiments at Binchuan Transmitting Seismic Station in 2011 and 2013 and found that (1) The similarity of seismic signals decrease with distance, which is most likely induced by the decay of signal amplitude and signal to noise ratio (SNR); (2) The amplitudes of far-field airgun signals are almost linearly proportional to the firing pressure; (3) The towing depth of airgun has less effects on the far-field signals; (4) The amplitudes of far-field airgun signals are proportional to the water level of the reservoir. 相似文献
17.
We address the problem of increasing the signal-to-noise ratio during surface microseismic monitoring data processing. Interference from different seismic waves causes misleading results of microseismic event locations. Ground-roll suppression is particularly necessary. The standard noise suppression techniques assume regular and dense acquisition geometries. Many pre-processing noise suppression algorithms are designed for special types of noise or interference. To overcome these problems, we propose a novel general-purpose filtration method. The goal of this method is to amplify only the seismic waves that are excited in the selected target area and suppress all other signals. We construct a linear projector onto a frequency domain data subspace, which corresponds to the seismic emission of the target area. The novel filtration method can be considered an extension of the standard frequency–wavenumber flat wave filtration method for non-flat waves and arbitrary irregular receiver-position geometries. To reduce the effect of the uncertainty of the velocity model, we suggest using additional active shot data (typically the perforation shots), which provide static travel time corrections for the target area. The promising prospects of the proposed method are confirmed by synthetic and semi-synthetic data processing. 相似文献
18.
For land seismic surveys, the surface waves are the dominant noises that mask the effective signals on seismograms. The conventional methods isolate surface waves from the effective signals by the differences in frequencies or apparent velocities, but may not perform well when these differences are not obvious. Since the original seismic interferometry can only predict inter-receiver surface waves, we propose the use of super-virtual interferometry (SVI), which is a totally data-driven method, to predict shot-to-receiver surface waves, since this method relieves the limitation that a real shot should collocate with one of the receivers for adaptive subtraction. We further develop the adaptive weighted SVI (AWSVI) to improve the prediction of dispersive surface waves, which may be generated from heterogeneous media at the near surface. Numerical examples demonstrate the effectiveness of AWSVI to predict dispersive surface waves and its applicability to the complex near surface. The application of AWSVI on the field data from a land survey in the east of China improves the suppression of the residual surface waves compared to the conventional methods. 相似文献
19.
高铁运行会引起铁轨的震动,从而产生地震波向地下介质中传播,通过研究该地震波可对高铁沿线的地质情况进行持续监测.与常规地震勘探中的震源相比,高铁地震中的震源较为复杂,为移动震源,而地震干涉技术可以通过地震记录间的相互干涉,消除震源的影响,因此可利用地震干涉技术对高铁地震信号进行处理并成像.本文通过分析研究,总结出地震干涉方法在处理高铁地震数据时的关键技术问题:不同于常规地震干涉中先干涉后叠加的干涉成像方式,高铁地震移动源的特点使得干涉顺序变为先叠加后干涉,由此带入了大量震源串扰噪声;初步提出两种解决高铁地震干涉成像的思路:通过对高铁地震信号的处理,使高铁变相"提速"或"降速",给出了"提速"或"降速"后各自的成像思路,并给出了数据处理的技术设想. 相似文献
20.
应用可控震源地震勘探,当环境噪声很强,采用组合震源工作仍不能满足信噪比要求时,引入能形成定向地震波的相控震源.由相控震源定向照明地震理论分析,主波束方向上3单元相控震源产生的反射地震波信号信噪比比单震源高6.53~9.54 dB,比组合震源高1.76~4.77dB.为研究相控地震实际效果,在同一测区进行了三种震源地震对比实验.由单炮地震记录和水平叠加时间剖面可知,相控震源反射波信号信噪比明显高于单震源情况,略高于组合震源情况.进一步对反射波信号功率谱特性做定量分析,得到如下结果：与单震源情况相比,相控震源使各道反射波信号信噪比提高了0.75~8.15 dB,平均提高3.65 dB;与组合震源情况相比,各道信噪比提高了0.93~3.17 dB,平均提高2.02 dB,实验结果与理论分析吻合.综上所述可知,基于相控震源的定向照明地震技术是可行的,可以有效提高地震信号的信噪比. 相似文献