共查询到20条相似文献，搜索用时 15 毫秒
1.
2.
新技术在城市地面沉降研究中的应用：遥感卫星雷达干涉测量（InSAR） 总被引：7，自引：0，他引：7
本文综述了遥感卫星合成孔径雷达（SAR）干涉测量及差分干涉测量的基本原理，针对近年来国外InSAR在地面沉降方面的研究成果，重点讨论了D－InSAR在国内大中城市进行地面沉降监测应用的可能性，对SAR数据的获取方法进行了阐述，并对这种方法目前的进展及未来应用前景进行了探讨。 相似文献
3.
D. Remy M. Falvey S. Bonvalot M. Chlieh G. Gabalda J.-L. Froger D. Legrand 《Journal of South American Earth Sciences》2011,31(2-3):214-226
The use of Synthetic Aperture Radar interferometry (InSAR) in northern Chile, one of the most seismically active regions in the world, is of great importance. InSAR enables geodesists not only to accurately measure Earth’s motions but also to improve fault slip map resolution and our knowledge of the time evolution of the earthquake cycle processes. Fault slip mapping is critical to better understand the mechanical behavior of seismogenic zones and has fundamental implications for assessing hazards associated with megathrust earthquakes. However, numerous sources of errors can significantly affect the accuracy of the geophysical parameters deduced by InSAR. Among them, atmospheric phase delays caused by changes in the distribution of water vapor can lead to biased model parameter estimates and/or to difficulties in interpreting deformation events captured with InSAR. The hyper-arid climate of northern Chile might suggest that differential delays are of a minor importance for the application of InSAR techniques. Based on GPS, Moderate Resolution Imaging Spectroradiometer (MODIS) data our analysis shows that differential phase delays have typical amplitudes of about 20 mm and may exceptionally exceed 100 mm and then may impact the inferences of fault slip for even a Mw 8 earthquakes at 10% level. In this work, procedures for mitigating atmospheric effects in InSAR data using simultaneous MODIS time series are evaluated. We show that atmospheric filtering combined with stacking methods are particularly well suited to minimize atmospheric contamination in InSAR imaging and significantly reduce the impact of atmospheric delay on the determination of fundamental earthquake parameters. 相似文献
4.
InSAR技术及其在沧州地面沉降监测中的应用 总被引：9，自引：0，他引：9
随着城市建设的飞速发展,地面沉降危害日益显著,常规的测量方法尽管精度高,但是成本高、采样精度低、测量时间周期长,已经无法满足当今社会的要求。合成孔径雷达干涉测量(InSAR)已成为测量地球表面变化极具潜力的技术,它可以大面积的采样、测量时间短,同时成本也很低。沧州地区至2001年沉降中心累计沉降量已达2236mm。文中介绍用合成孔径雷达干涉测量进行沧州地区地面沉降监测的试验,最后利用InSAR的差分技术得到的沧州地区的地面沉降监测结果,并据此得到一些初步认识。 相似文献
5.
用InSAR技术提取数字高程模型的研究 总被引：2，自引：1，他引：2
合成孔径雷达干涉测量(InSAR,Synthetic Aperture Radar)是一种获取地面数字高程模型(DEM)和探测地面微小形变的新技术。这里概述了干涉测量的发展历史,介绍了干涉测量的基本原理,并利用青藏高原库塞湖地区的数据对干涉测量获得地面数字高程模型进行了详细的阐述,最后对生成的地面数字高程模型进行结果分析。 相似文献
6.
In 2006, a cooperation project between China Geological Survey and the Geological Survey of Canada started the monitoring
of the landslide along the deep-cut valley in the western Sichuan using integrated GPS and InSAR observation at the Jiaju
landslide. Both GPS and InSAR techniques provided complementary measurements with the GPS providing horizontal movement and
InSAR providing vertical motion. Meanwhile, InSAR images demonstrate also an effective tool to recognize new landslides in
complex steep mountain region. The GPS observations provide continuous monitoring data while InSAR data provide monthly measurements.
The differential InSAR results show a deformation information that divided the Jiaju landslide to two areas, the north and
south parts. The north part is sliding greater than the southern part in spatial domain. The sliding was faster in 2008 than
that in 2006 in time domain, suggesting a gradual increased acceleration over time. The GPS displacement data during the past
2 years show the northern part slid horizontally 55–207 mm/a and vertically −23 mm/a, while the southern part slid horizontally
12–34 mm/a; and the vertical displacement mainly moved downward 0.05 to 12 mm/a. On average, the observations from December
of 2006 to January of 2008 indicate that the northern part is sliding at 41.6 mm/a horizontally and 43.9 mm/a vertically,
while the southern part is sliding at 16.1 mm/a horizontally and 17.5 mm/a vertically. The data acquired through the GPS and
InSAR are generally comparable. Geological survey revealed some secondary landslides, cracks, and fissures within the deformation
of the Jiaju landslide that could be induced by following factors: surface water drainage, river erosion, and slope cutting
and overloading. 相似文献
7.
INSAR技术在北京来广营地区地面沉降监测中的应用 总被引：1，自引：0，他引：1
北京市平原地区地面沉降危害日益显著,合成孔径雷达干涉测量（InSAR）具有快速、高精度、周期短等优势,可为城市地面沉降监测提供有效的技术手段。本文选用ENVISAT-1卫星SAR数据监测研究2004-2005年北京来广营地区地面沉降,利用InSAR差分技术得到该地区地面沉降监测结果。 相似文献
8.
Interferometric synthetic aperture radar (InSAR) analysis is a radar technique for generating large-area maps of ground deformation using differences in the phase of microwaves returning to a satellite. In recent years, high-resolution SAR sensors have been developed that enable small-scale slope deformation to be detected, such as the partial block movement of a landslide. The L-band SAR (PALSAR-2) is mounted on Advanced Land Observing Satellite-2 (ALOS-2), which was launched on 24 Mar. 2014. Its main improvements compared with ALOS are enhanced resolution of as high as 3 m with a high-frequency recurrence period (14 days). Owing to its high resolution and the use of the L-band, PALSAR-2 can obtain reflective data passing through a tree canopy surface, unlike the other synthetic aperture radars. Therefore, the coherence of InSAR in mountainous forest areas is less likely to decrease, making it advantageous for the extraction of slope movement. In this study, to verify the accuracy of InSAR analysis using PALSAR-2 data, we compared the results of InSAR analysis and the measurement of the displacement in a landslide by global navigation satellite system (GNSS) observation. It was found that the average difference between the displacements obtained by InSAR analysis and the field measurements by GNSS was only 15.1 mm in the slant range direction, indicating the high accuracy of InSAR analysis. Many of the areas detected by InSAR analysis corresponded to the locations of surface changes due to landslide activity. Additionally, in the areas detected by InSAR analysis using multiple datasets, the ground changes due to landslide movement were confirmed by site investigation. 相似文献
9.
利用InSAR技术研究黄土地区滑坡分布 总被引：1，自引：0，他引：1
InSAR技术能够获取大面积、连续、高精度的地表垂直形变信息,可用来监测地震、火山、滑坡等自然灾害造成的地表形变。文章介绍了InSAR技术在监测陕北黄土地区滑坡中的应用,首先进行野外地质勘察和TM光学遥感影像解译,接着通过EnviSat SAR数据差分干涉处理,获取研究区干涉形变场,提取出滑坡位移量,最后详细分析黄草湾至董家寺沿线一带的滑坡变形范围,并划定出了4个有一定变形的重点监视区。 相似文献
10.
合成孔径雷达干涉测量(InSAR)技术是传统的合成孔径雷达技术和射电天文学中的干涉测量技术相结合而发展起来的一项新的遥感技术,这一新技术以其在大范围地表高程测量和地表变形测量方面所具有的独特优势和巨大潜力,而成为对地测量和地学科学研究的一个重要的工具。同星载InSAR相比,机载InSAR在高分辨率区域测图方面具有较大的优势,而且数据采集的时间安排及飞行方位选取方面相对较灵活。而且SAR是一种主动微波遥感技术,具有全天时全天候的工作特征,这一技术也正在成为中国西部困难地区测图的一个非常有效的工具。在详细分析应用机载InSAR数据测量地表高程的基本原理的基础上,提出了机载InSAR自动生成DEM的技术流程,并以内蒙古丰镇地区的机载InSAR数据为基础进行了试验研究,取得了较好的效果,为这一新技术的进一步实际应用奠定了基础。 相似文献
11.
合成孔径雷达干涉测量技术（InSAR）及其对城市遥感的意义 总被引：2，自引：0，他引：2
该文详细论述与分析了合成孔径雷达干涉测量（InSAR)的干涉几何特征及InSAR影像之间的相关性特征，着重阐述并分析了影响其地学监测方面的数据质量等相干技术问题，就InSAR开展上海城市地面沉降研究提出了基本思路，对InSAR城市遥感应用的潜在意义进行了分析和讨论。 相似文献
12.
为了探明川藏交通廊道典型工点高陡岸坡的稳定性,以及明确SAR(synthetic aperture radar)几何畸变对InSAR(interferometric synthetic aperture radar)形变结果的影响,利用时序InSAR技术开展川藏交通廊道典型工点高陡岸坡形变监测,并提出了一种可识别所有几何畸变类型的SAR几何畸变精细判识方法.成功识别出9处不稳定的高陡岸坡,获取了各轨道SAR几何畸变精细识别结果.在精细划分几何畸变的前提下,通过进一步地将几何畸变与形变结果联合分析,首次揭示了各类几何畸变(包括透视收缩、主被动叠掩、主被动阴影)对InSAR形变结果的影响效果.研究明确了InSAR技术在川藏交通廊道高陡山区的应用能力、适用范围以及几何畸变区结果可靠性的判识,可为后续高陡岸坡形变监测、精确解译等研究提供重要参考. 相似文献
13.
基于合成孔径雷达干涉测量技术的地面沉降研究综述 总被引：2，自引：0，他引：2
综述了合成孔径雷达干涉测量(InSAR)技术的研究现状及其在监测地面沉降方面的优势和缺陷.与传统监测方法相比,InSAR技术在地面沉降监测方面主要具有全天候、大范围、高分辨率、高精度等优势,但在实际应用中则会产生去相关问题.探讨了利用该技术监测地面沉降的发展方向,认为应将InSAR与GPS及传统的水准测量等方法结合使用,合理利用各技术之间的互补性. 相似文献
14.
极具潜力的空间对地观测新技术——合成孔径雷达干涉 总被引：33，自引：0，他引：33
“合成孔径雷达干涉(InSAR)”是近十年发展起来的空间对地观测遥感新技术。它具有从覆盖同一地区的星载(或机载)合成孔径雷达复数图像对提取干涉相位图,借助于雷达成像时的姿态数据重建地表三维模型(即数字高程模型)的巨大潜力。尤其是基于多幅雷达复数图像处理的差分干涉技术(D-InSAR)可以用于监测地表形变,精度可达厘米级甚至更高,其监测空间分辨率是前所未有的。介绍了InSAR和D-InSAR的基本原理,对影响干涉结果的一些重要因素做了分析,重点回顾和展望了差分干涉技术在与地表形变有关的地震监测和震后形变测量、地面下沉和山体滑坡、火山运动监测等方面应用的现状和前景。 相似文献
15.
Natural Hazards - Interferometric synthetic aperture radar (InSAR) technology has the potential to reveal ground surface deformation at high temporal and spatial resolutions, and the InSAR image... 相似文献
16.
作为大地测量的一种新兴空间技术,合成孔径雷达干涉（synthetic aperture radar interferometry, InSAR）具有全天时、高精度、大范围和速度快的优点,逐渐被应用于多年冻土区地表形变监测中。通过综述多年冻土形变原理及InSAR监测多年冻土形变的应用实例,研究表明：在气候变暖的背景下,多年冻土区地表年际形变以下沉为主,多年冻土上限附近地下冰含量的大小是影响年际形变量的主要因素;活动层内土壤含水量影响着地表季节形变量的大小,不同类型多年冻土区的地表年际形变量和季节形变量存在着较大的差异。研究还表明,不同波长的SAR产品在不同类型多年冻土区的适用性不同,下垫面特征对利用InSAR获取地表形变量有较大影响,L波段的SAR数据在植被覆盖度较好的区域有更好的效果。由于InSAR的失相干问题,加之目前还缺少长时间、多类型、高频率的实测形变结果作为验证和标校数据,获取准确且连续的大范围形变数据较为困难。针对目前寒区研究需求,布设野外长期观测站点,建立适用于不同多年冻土区的地表形变反演算法,构建具有较高精度和较高时空分辨率的地表形变数据集具有重要的实践和科学意义。 相似文献
17.
Chenglong Ma Xiaodong Chen Liming Jiang Heping Sun Jianqiao Xu Jinglong Dong Dewei Li 《地球科学进展》2019,34(2):164-174
Based on the principle of InSAR (Interferometirc Synthetic Aperture Radar) characterized by large-scale, continuity, permanency and dynamic, we took vertical displacement of solid Earth tide as an example to simulate the large-scale deformation observed by lunar based InSAR for the first time in the study and the observation ability was analyzed. Solid Earth tide has a feature of a large-space distribution range and the lunar based InSAR exhibits a feature of an ultra-wide swath imaging. According to these features, a simplified observation geometry model was established and a mid-low latitudes area with 50 degrees span in both longitude and latitude was selected as the simulation area. Then the revisit time intervals of the lunar based SAR for the selected area and the tidal vertical displacements at the points scanned by the radar were calculated. The time differentials were further computed to get the relative vertical deformation of the solid Earth tide. The simulation results show that the revisit period of the lunar based radar is about 24.8 hours and the maximum vertical displacement in 30 days is up to 30 cm. Since the designed accuracy of the lunar based InSAR reaches several centimeters, the observing of the vertical displacement of the solid Earth tide by using the lunar based InSAR is feasible in theory as the maximum magnitude of the vertical displacement is 1 order of magnitude larger than the designed accuracy. Theoretically ,solid Earth tide is observable by using lunar based InSAR in a sizable area.We can also use the observation data to study the temporal and spatial variation characteristics when observation time lasts two revisit periods or more. On the other hand,the result of the study also provides references for the parameter designing of other observations using the lunar based InSAR, especially for observing large-scale geodynamic phenomena. 相似文献
18.
Most applications of Synthetic Aperture Radar (SAR) make only use of the amplitude information in just one image. Interferometric SAR (InSAR) makes use mainly of the phase measurements in two or more SAR images of the same scene, acquired at two different moments and/or at two slightly different locations. By interference of the two images, very small slant-range changes of the same surface can be inferred. These slant-range changes can be related to topography and/or surface deformations. InSAR thus has the potential of mapping centimeter-scale ground displacements over a region many tens of kilometers in size at a resolution of a few meters making it one of the most promising space-geodetic techniques for monitoring Earth's surface deformations. The goal of this paper is to discuss some of the potential new applications of InSAR for the monitoring of deformations, and to show its major limitations. Some potential new applications of InSAR related to surface-change detection including earthquake and crustal studies, the monitoring of volcanoes and anthropogenic effects, and the monitoring of glaciers and ice sheets are presented. The discussion on the limitations of InSAR for surface-change detection focuses on atmospheric perturbations and the problem of temporal decorrelation. 相似文献
19.
20.
基于InSAR和ICESat的南极冰盖地区DEM提取和精度分析 总被引：3，自引：1，他引：2
结合InSAR和ICESat测高数据,以东南极PANDA断面4个实验区为例,进行DEM生成研究.在干涉相位转换成高程前,引入ICESat测高数据作为控制点优化干涉对基线,消除基线线性误差趋势的影响.利用控制点之外的ICESat测高数据分析4个实验区的DEM精度及其差异,并探讨了引起DEM误差的原因.冰流和地貌特征是影响InSAR生成冰盖DEM精度的重要因素.针对冰流的影响,从理论上进行了分析并结合冰流速数据进行了分析验证.最后利用克里金插值法改正InSAR DEM残余误差,并利用GPS实测控制点对改正效果进行验证.结果表明:对于高纬区流速较小且分布一致的区域,改正效果很好,DEM精度可达3 m;而对于冰流速较大且复杂的地区,需采用多基线等算法进一步消弱冰流引入的误差. 相似文献