首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 171 毫秒
1.
周建勋  漆家福 《地质科学》1999,34(4):491-497
五种不同边界几何条件的平面砂箱实验模型表明,一个方向的伸展变形可因伸展边界方向的变化形成不同走向的正断层,伸展裂陷盆地中不同走向的正断层并非一定代表不同方向区域构造应力作用、或多期构造变形的结果。伸展裂陷盆地正断层走向受伸展边界走向和构造伸展的方向共同控制,伸展边界的控制力随距离增大而逐渐衰减。伸展边界附近的断层走向主要受伸展边界方向控制,大致反映伸展边界方向。盆地内部断层走向主要受构造伸展方向控制(趋向于垂直构造伸展方向),主要反映构造伸展方向。盆地伸展边界方向的变化可以引起伸展裂陷盆地内部断层走向的转向。因铲式正断层上盘滚动变形产生的正断层,其走向平行于铲式边界断层的走向。  相似文献   

2.
车镇凹陷车古201潜山形成过程的构造物理模拟   总被引:1,自引:1,他引:0  
在对车古201潜山的三维地震剖面进行解释分析和构造反演的基础上,根据构造模型和相似理论,用砂箱模型模拟了对该区潜山的构造特征及演化过程。结果表明:a.车古201区的主控断层形态具有上部铲式,深部坡坪式的构造特点,正是这样的边界特点造就了本区的潜山构造;b.主控断层坡折带处的逆断层是在伸展作用下由正断层倒转形成的;c.本区的复杂构造变形是正断层上盘变形和柔性基底不均匀伸展的复合作用结果。   相似文献   

3.
铲式断层的构造力学分析   总被引:2,自引:0,他引:2  
在岩石圈中广泛发育了不同层次、不同尺度的铲式断层。本文按照构造力学成因划分为原生和次生铲式断层。前者又划分为重力滑动铲式断层、区域伸展铲式正断层、区域收缩铲式逆断层和深部韧性铲式断层。运用服从二次曲线型莫尔准则的滑移线场理论,本文初步确定了各类铲式断层在形成时期的产状、型式和断面力学性质,并分析了各类铲式断层的构造演化以及有关的岩石圈构造动力学过程。  相似文献   

4.
新汶矿区多层次滑脱构造   总被引:9,自引:2,他引:7  
岩石圈内部存在着多层次拆离滑脱现象,主要由伸展作用形成的矿区边界铲状正断层交汇于深层次滑脱构造面上,而浅层次滑脱构造主要是在地壳伸展之后重力滑动作用的结果。这些多层次滑脱构造是新汶矿区构造格局形成的最主要因素。  相似文献   

5.
构造因素对半地堑盆地的层序充填的影响   总被引:5,自引:2,他引:5       下载免费PDF全文
漆家福  杨桥 《地球科学》1997,22(6):603-608
运用平衡剖面分析和构造物理模拟实验方法研究了典型铲式正断层模型上盘盆地的发育过程.研究表明,铲式正断层的产状以及断层上盘的变形方式直接影响上盘盆地的形态和沉积层序结构.简单铲式正断层的上盘发育相对简单的半地堑盆地,复杂铲式(坡坪式)正断层的上盘则发育包含有内部次级背斜凸起和向斜凹陷的复式半地堑,而且半地堑盆地的宽度与拆离断层面深度成正比.在沉积物补偿充填的情况下,渐进伸展将使半地堑的宽度也保持不变,从而使半地堑构造斜坡上产生“视水退”的层序结构现象,并且使盆地中“垂向加积”的沉积层序演变为宏观上“侧向加积”的沉积层序.这种由构造因素对半地堑盆地的层序充填的影响在渤海湾盆地的部分老第三纪断陷中得到印证.  相似文献   

6.
黄骅坳陷孔南地区新生代盆地演化经历了断陷期、断坳期及坳陷期。盆地内部发育复杂断裂系统,根据断层活动特征可以分为沧东伸展断裂系统与徐西右旋走滑断裂系统。沧东断层剖面上具有铲式正断层特征,向深部滑脱,控制了孔南地区的构造变形;徐西断层可以看作是其上盘上的次级断层。在孔店组沉积期,沧东断层与徐西断层均表现出伸展正断层的特征,控制了其上盘孔店组沉积。在沙河街组三段沉积期,受基底断层右旋走滑影响,徐西断层及其上盘分支断层表现出右旋走滑特征。在伸展与走滑的共同作用下,在孔南地区中北部聚集了丰富的油气。  相似文献   

7.
在江西赣州西北部蛤湖地区发现1条韧性拆离断层,宽1~3km,倾向南东。该断层以震旦系砂页岩的构造片岩化和中酸性火山岩的糜棱岩化为特征。其上盘由5~6条铲式正断层组成,正断层的倾向与拆离断层一致,其中最上部的1条正断层控制了箕状断陷盆地的形成和分布;下盘为笔架山穹隆状复式花岗岩杂岩体及其外接触带的震旦系浅变质地层。这些构造构成了一个在成因上与拆离断层形成有关的伸展构造体系。该体系的形成与区域北东向地垒式隆起局部地段的强烈隆升有关,发生于侏罗纪至晚白垩世,其活动对内生成矿起着重要的控制作用。  相似文献   

8.
松辽盆地长岭断陷构造演化及其动力学背景   总被引:1,自引:0,他引:1       下载免费PDF全文
通过大量高精度二维地震剖面的构造解析与平衡地质剖面构造演化史定量恢复,探讨了松辽盆地长岭断陷的构造演化及其地球动力学背景。长岭断陷发育NNE、NNW、SN等多个方向的低角度铲式正断层,它们可能是在晚侏罗世一早白垩世郯庐断裂系左行走滑派生的次级破裂的基础上受断陷期强烈地壳伸展拆离作用形成的。断陷期可分为早晚两个脉冲式伸展事件,每个伸展脉冲均由一个快速伸展期和其后的缓慢伸展期组成,前者与火山活动高峰期相对应,后者则是构造转换期。早期伸展是以热穹窿式多向拉伸为标志,可能是侏罗纪岩石圈加厚后根部发生拆沉作用导致地壳弹性回调和岩浆底侵的结果。而晚期伸展则以NWW-SEE向区域伸展为标志,是对中国东部广泛的地壳伸展拆离和岩石圈减薄事件的响应,可能是伊则纳崎板块俯冲产生的弧后扩张效应。  相似文献   

9.
利用地震资料、油气勘探资料分析了南海北部大陆边缘珠江口-琼东南新生代盆地断裂系统的时空差异及动力学成因机制.珠江口-琼东南盆地古近系裂陷构造层以NE向、近EW向基底正断层构成的伸展断裂系统的几何学、运动学沿着盆地走向有明显变化,盆地内部隐伏的区域性和局部的NW向断裂及相关构造变形带构成伸展断裂系统之间的构造变换带.在空间上,区域性的云开、松涛-松南等NW向构造变换带以西为NE-NEE向正断层构成的"非拆离"伸展断层系,以东为NE向正断层、近EW向正断层(走滑正断层)复合而成的拆离伸展断层系.在时间上,古近纪裂陷作用可划分为早(文昌组沉积期)、中(恩平组/崖城组沉积期)、晚(珠海组/陵水组沉积期)3个有明显差异的裂陷期.裂陷早期,盆地西部以平面式正断层控制的简单地堑、半地堑为主,伸展量相对较小,东部则以铲式正断层控制的复式地堑、半地堑为主,伸展量相对大,断层向深部收敛在中地壳韧性层构成拆离的伸展断层系统.裂陷中期,琼东南盆地、珠江口盆地西部断裂具有继承性活动特点,珠江口盆地东部发育NWW-EW向伸展断层,并向深层切割早期浅层拆离断层,形成深层拆离伸展断层系统,而沿着云开构造变换带发育反转构造.裂陷晚期,琼东南盆地、珠江口盆地西部断裂具有活动性减弱特点,琼东南盆地东部发育NWW-EW向伸展断层,形成深层拆离伸展断层系统,而沿着琼中央构造变换带发育反转、走滑构造.珠江口-琼东南盆地不同区段断裂系统及其构造演化的差异性受盆地基底先存构造、地壳及岩石圈结构及伸展量等多方面因素的影响,拆离伸展断层系统与发育NWW向"贯穿"断裂的基底构造薄弱带、现今地壳局部减薄带相关,南海扩展由东而西的迁移诱导北部大陆边缘块体沿着先存NW向深大断裂发生走滑旋转是导致变换构造带两侧差异伸展的动力学原因,应力场及岩石圈热结构变化是引起拆离断层深度变化的重要因素.  相似文献   

10.
塔里木盆地塔北隆起中-新生界伸展构造及其成因探讨   总被引:5,自引:2,他引:3  
中-新生代伸展构造一直是中亚地区地质研究的薄弱环节.作为中亚地区的一个重要的中新生代沉积盆地,塔里木盆地也不例外.精细的地震资料解释发现,塔里木盆地塔北隆起发育大量中-新生代伸展构造.这些伸展构造由一系列规模不大的正断层组成.这些小型正断层往往构成左阶或右阶式雁列束,平面上,组成多条张扭性正断层带;剖面组合形态则是小型堑-垒构造或阶梯状正断层束.根据伸展构造的空间展布、构造样式、组合关系、形成演化时间和成因分析,可以划分出侏罗纪-白垩纪早期和白垩纪晚期-新近纪两期伸展构造.前者是南天山碰撞造山后应力松弛阶段的产物,后者的成因是喜马拉雅碰撞造山作用远程效应引起的塔里木相对于南天山向东偏南方向的构造逃逸.  相似文献   

11.
Various earthquake fault types were analyzed for this study on the crust movement in the high region of the Tibetan plateau by analyzing mechanism solutions and stress fields. The results show that a lot of normal faulting type earthquakes are concentrated in the central High Tibetan plateau. Many of them are nearly perfect normal fault events. The strikes of the fault planes of normal faulting earthquakes are almost in an N-S direction based on the analyses of the Wulff stereonet diagrams of fault plane solutions. It implies that the dislocation slip vectors of the normal faulting type events have quite great components in the E-W direction. The extensions probably are an eastward extensional motion, being mainly a tectonic active regime in the plateau altitudes. The tensional stress in the E-W or NWW-SEE direction predominates earthquake occurrences in the normal event region of the central plateau. The eastward extensional motion in the high Tibetan plateau is attributable to the gravitational collapse of the high plateau and the eastward extrusion of hotter mantle materials beneath the east boundary of the plateau. Extensional motions from the relaxation of the topography and/or gravitational collapse in the high plateau hardly occurred along the N-S direction. The obstruction for the plateau to move eastward is rather weak.  相似文献   

12.
珠江口盆地裂后期断裂作用对新近系油气成藏具有重要影响,但人们对其发育特征及动力学演化规律的认识一直不够.利用钻井约束的高精度三维及二维地震资料对珠一坳陷裂后期断裂的几何学与运动学特征进行了分析,结果表明珠一坳陷裂后期存在南海期和东沙期两期断裂作用,从南海期断裂作用到东沙期断裂作用,断裂的几何学、运动学特征以及动力学机制均发生了转换.南海期断裂作用具有从南向北迁移的特征;而东沙期断裂具有由东向西迁移的特征.两期断裂都以伸展为主,其中东沙期断裂具有微弱扭性特征.南海期断裂区域伸展方向为NNE10°~15°,东沙期为NNE20°~25°,区域伸展方向发生了5°~10°的顺时针偏转.南海期断裂作用发生于南海同扩张期,可能与南海扩张期间北部陆缘残留的伸展作用有关.东沙期断裂作用形成于南海后扩张期的东沙运动,该时期区域主应力轴σ2方向与吕宋岛弧和欧亚大陆的挤压碰撞方向一致.东沙期断裂特征进一步证实了东沙运动是中中新世以来吕宋岛弧与欧亚大陆碰撞的结果.研究结果对整个南海地区裂后期南海运动与东沙运动的进一步认识具有重要意义.   相似文献   

13.
青藏高原东西向伸展及其地质意义   总被引:30,自引:4,他引:30  
张进江  丁林 《地质科学》2003,38(2):179-189
东西和南北向伸展是青藏高原最显著的地质特征之一。南北向伸展形成的东西走向伸展构造,主要包括藏南拆离系(STDS),和沿喀喇昆仑—嘉黎断裂带(KJFZ)发育的正断层体系。东西向伸展形成数目众多的南北走向伸展构造,它们切割青藏高原几乎所有的东西走向构造单元,包括羌塘地块、KJFZ和STDS等,说明东西向伸展以整体形式发生并同时波及整个青藏高原,而不是由以KJFZ和STDS为边界的不同地块的不均匀挤出所致。南北走向伸展构造在地表呈之字形,为南北向挤压形成的追踪张断裂;剖面上表现为被后期高角度正断层叠加的拆离断层,拆离断层形成于中-晚中新世而高角度正断层形成于上新世及以后。导致拆离断层的东西向伸展可能是南北向挤压的变形分解,后期高角度正断层作用可能是高原隆升后的垮塌所致。东西向伸展是控制青藏高原新生代浅色花岗岩和盆地形成的主要因素。  相似文献   

14.
In the Makran subduction zone, earthquake focal mechanisms and geodetic data indicate that the deforming prism currently experiences N–S compression. However, palaeostress inversions performed on normal faults observed along the coast reveal local stress components consistent with N‐S extension. Previously proposed mechanisms such as gravitational collapse are not favoured by N–S compression and surface uplift. We propose that the observed kinematics result from transient stress reversals following large earthquakes. During the interseismic period (now), the region experiences N–S compression. However, following a large reverse rupture on the subduction interface, stresses in the inner wedge relax, enabling a brief period of extensional faulting before a compressive stress state is re‐established. This mechanism, also observed in other subduction zones, requires low overall stresses in the upper plate and that the margin ruptures in large megathrust earthquakes that result in nearly complete stress drops.  相似文献   

15.
青藏高原及其周围地区区域应力场与构造运动特征   总被引:14,自引:5,他引:14       下载免费PDF全文
徐纪人  赵志新 《中国地质》2006,33(2):275-285
本文系统解析并分析了1931年8月-2005年10月期间青藏高原及其周围发生的905个震级M4.5-8.5地震的震源机制结果,研究了青藏高原岩石圈的区域应力场与构造运动特征。结果表明,来自印度板块的北北东或北东方向的水平挤压应力控制了青藏高原及其周缘地区的岩石圈应力场。从喜马拉雅到贝加尔湖以南包括中国西部的广大范围内,主压应力P轴的水平分量位于近NE-SW方向,形成了一个广域的NE-SW方向的挤压应力场。特别是青藏高原周缘地区,除其东部边缘外,南部的喜马拉雅山前沿以及青藏高原的北部、西部边缘地区所发生的绝大部分地震都属于逆断层型或走滑逆断层型地震,表现出周缘地区的水平挤压应力更为强势。应力场特征充分表明, 印度板块的北上运动,以及它与欧亚板块之间的碰撞,所形成的挤压应力场是青藏高原强烈隆起的直接原因。在青藏高原周缘地区受到强烈挤压应力场控制的同时,有大量正断层型地震集中发生在青藏高原中部海拔4000m以上的地区,其中许多地震是纯正断层型地震。震源机制结果显示,近E-W向或WNW-ESE向的水平扩张应力控制着该区的岩石圈应力场;正断层型地震的断层走向多为南北方向,断层位错矢量的水平分量大体位于近东西方向。这表明青藏高原中部高海拔地区存在着近东西方向的扩张构造运动,且扩张构造运动是该区引张应力场的作用结果。其动力学原因可能与持续隆升的高原自重增大引起的重力崩塌及其周边区域构造应力状况有关。研究青藏高原存在挤压应力场与引张应力场及其构造运动的区域特征,对于认识青藏高原形成、发展的地球动力学机制,有着极其重要的意义。  相似文献   

16.
Upper Pleistocene and Holocene tectonic movements in the Aegean region are analyzed by geological means (deformation of shorelines, faults in Quaternary deposits, historical seismicity). Examples from Crete, Karpathos, Milos, Chios and Samos are presented. While subduction, indicated by geophysical data, occurs beneath the Hellenic Arc, extensional tectonics (i.e., normal faulting) takes place within and behind the arc, resulting in a slight expansion of the Aegean region towards the Eastern Mediterranean.  相似文献   

17.
《Geodinamica Acta》2013,26(6):375-387
Information from surface and subsurface geology (boreholes and seismic reflection lines) are used to depict the geometry of the extensional structures (low-angle normal faults and related Tuscan Nappe megaboudins) affecting the Mt. Amiata geothermal area and developed during the early stage of the extensional tectonics which affected the inner Northern Apennines and Tyrrhenian Sea from the Early-Middle Miocene. Normal faulting involved the thickened middle-upper crust after the collisional stage and, in the Mt. Amiata region, took place over relatively short periods (5-7 Ma) characterised by rapid extensional strain rates. Normal faults showing articulated geometry (flat-ramp-flat) characterised by subhorizontal detachments (flats) and synthetic ramps, caused widespread megaboudinage mainly in the sedimentary tectonic units and particularly in the Tuscan Nappe. Evaporites occurring at the base of the Tuscan Nappe, the deepest sedimentary tectonic unit of the Northern Apennines, controlled the geometry of the faults, and rift-raft tectonics may be the style of this first extensional phase. Three Tuscan Nappe extensional horses (megaboudins) have been recognised in the subsurface of the Mt. Amiata area. They are characterised, in map view, by elliptical shapes and show a mean NNW-SSE lengthening. They are delimited at the base and at the top by east-dipping flats, while their western and eastern margins coincide with east-dipping ramps. On the whole, considering their geometrical features, these megaboudins correspond to extensional horses belonging to an asymmetrical east-dipping extensional duplex system.

Rollover anticlines deformed the western ramp of the megaboudins and rotated the uppermost flat as well as all the structures previously developed, which became steeply-dipping to the west.  相似文献   

18.
Apatite fission-track analyses indicate that the Kazda? Massif in northwestern Anatolia was exhumed above the apatite partial annealing zone between 20 and 10 Ma (i.e. early-middle Miocene), with a cluster of ages at 17–14 Ma. The structural analysis of low-angle shear zones, high-angle normal faults and strike-slip faults, as well as stratigraphic analysis of upper-plate sedimentary successions and previous radiometric ages, point to a two-stage structural evolution of the massif. The first stage -encompassing much of the rapid thermal evolution of the massif- comprised late Oligocene-early Miocene low-angle detachment faulting and the associated development of small supradetachment grabens filled with a mixture of epiclastic, volcaniclastic and volcanic rocks (Küçükkuyu Fm.). The second stage (Plio-Quaternary) has been dominated by (i) strike-slip faulting related to the westward propagation of the North Anatolian fault system and (ii) normal faulting associated with present-day extension. This later stage affected the distribution of fission-track ages but did not have a component of vertical (normal) movement large enough to exhume a new partial annealing zone. The thermochronological data presented here support the notion that Neogene extensional tectonism in the northern Aegean region has been episodic, with accelerated pulses in the early-middle Miocene and Plio-Quaternary.  相似文献   

19.
A new compilation of reliable isotope age data indicates that Cretaceous magmatism in SE China occurred in four major episodes during 136–146 Ma, 122–129 Ma, 101–109 Ma and 87–97 Ma. A-type granitic and within-plate basaltic magmatism from 140–90 Ma suggests a dominant extensional environment in the region. Voluminous coeval high-K calc-alkaline rocks, which have geochemical features similar to those formed in continental back-arc and post-collision extension settings, are interpreted to have been generated in response to lithospheric extension. Cretaceous magmatism, NNE-trending wrench faulting and formation of extensional basin systems favour an extensional tectonic regime in SE China at that time, which was probably similar to present-day Basin and Range Province in the western US.  相似文献   

20.
形成于燕山期的黑牛洞铜矿分布在江浪变质核杂岩的伸展型韧性剪切带内,变基性火山岩附近矿化和蚀变强烈。伸展型韧性剪切带晚期具有张性或张扭性断裂叠加的构造特征。黑牛洞铜矿似属韧性剪切带型铜矿,其成矿物质具有多来源、成矿作用具有多期次、矿床具有多成因的特点,而最终使其成为富铜矿的重要控矿因素则是燕山期的伸展型韧性剪切作用及其晚期的脆性断裂叠加。建议找矿在伸展型韧性剪切带内,有变基性火山岩发育,矿化、蚀变显示良好,晚期叠加张性或张扭性断裂的有利地段展开。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号