共查询到20条相似文献，搜索用时 46 毫秒
1.
Sven Follin Lee Hartley Ingvar Rhén Peter Jackson Steven Joyce David Roberts Ben Swift 《Hydrogeology Journal》2014,22(2):313-331
The large-scale geological structure of the crystalline rock at the proposed high-level nuclear waste repository site at Forsmark, Sweden, has been classified in terms of deformation zones of elevated fracture frequency. The rock between deformation zones was divided into fracture domains according to fracture frequency. A methodology to constrain the geometric and hydraulic parameters that define a discrete fracture network (DFN) model for each fracture domain is presented. The methodology is based on flow logging and down-hole imaging in cored boreholes in combination with DFN realizations, fracture connectivity analysis and pumping test simulations. The simulations suggest that a good match could be obtained for a power law size distribution where the value of the location parameter equals the borehole radius but with different values for the shape parameter, depending on fracture domain and fracture set. Fractures around 10–100 m in size are the ones that typically form the connected network, giving inflows in the simulations. The report also addresses the issue of up-scaling of DFN properties to equivalent continuous porous medium (ECPM) bulk flow properties. Comparisons with double-packer injection tests provide confidence that the derived DFN formulation of detailed flows within individual fractures is also suited to simulating mean bulk flow properties and their spatial variability. 相似文献
2.
地应力作用下的钻孔孔壁会发生一定程度的变形,导致钻孔横截面形状会发生变化,变形后的钻孔几何形态也反映了钻孔受力状态。在经典岩石力学理论的基础上,研究钻孔在平面二维应力作用下的几何形态,建立应力与变形后圆孔几何参数的关系,实现基于钻孔椭圆参数的应力解算,并提出钻孔椭圆参数的测量方法和测量技术,形成一种新的基于钻孔形态分析的地应力测量方法。结果表明,（1）在平面二维应力作用下圆孔变形后的几何形态为椭圆,推导了椭圆参数与应力的关系表达式;（2）利用3个不同方向的孔径值可以实现椭圆参数的解算,研发触头式显微光学孔径测量技术,实现了钻孔形态的测量,从原理上分析了技术实现的可行性,并就该技术进行地应力测量过程中可能存在的问题进行了探讨;（3）通过室内模拟试验,验证了技术原理的可行性,并通过误差分析和实例计算对该方法测量结果的准确性进行了讨论。 相似文献
3.
低透煤层增透效果的定量描述和评价一直处于盲目状态,使得煤矿瓦斯治理中致裂措施、瓦斯抽采不能因地制宜。增透率可反映采动或人工增透措施对煤岩体渗透特性的改变,并可定量评价煤层增透效果,其分布和演化规律可精准圈定瓦斯富集区域,指导瓦斯抽采钻孔的合理布置。在简化钻孔和裂隙模型基础上,求解了采动条件下钻孔的体积应变,提出了针对单孔的增透率计算方法;依托同煤矿塔山矿8212采面,开展现场裂隙探测试验,研究了工作面前方采动裂隙网络发育演化及卸压增透变化规律,并分析了单孔增透率随回采面推进的演化特征。结果表明：裂隙网络呈现“从无到有、从短变长、从窄变宽、不断贯通”的趋势,煤岩体单孔增透率随回采面推进呈现先逐渐上升后保持平稳的趋势,该成果有望直接优化煤矿现场瓦斯抽采孔的布置设计。 相似文献
4.
The effect of heterogeneity in meso level geometric and material properties on tensile strength and size effect in split cylinder specimens is investigated. Critical meso geometric parameters are identified by studying their influence on the evolution of the fracture process zone. A statistical analysis is used to account for dependencies between the parameters. A reversal of the size effect, important for the strength of field specimens, is observed for certain meso geometries. Meso level explanations for this are proposed, and meso geometries likely to show such a reversal are identified. For moderately sized specimens, major trends in the size effect are seen to be almost entirely explained by heterogeneity in the meso geometry. 相似文献
5.
Based on a simulation of three-dimensional fracture networks and a superposition principle of liquid dissipation energy for fractured rock masses, a model of the fracture permeability tensor is proposed. An elastic constitutive model of rock fractures, considering fracture closure and dilation during shearing, is also proposed, based on the dilation angle of the fracture. Algorithms of flow-path searching and calculation of the effective flow coefficients for fracture networks are presented, together with a discussion on the influence of geometric parameters of the fractures (trace length, spacing, aperture, orientation and the number of fracture sets) on magnitude, anisotropy of hydraulic permeability and the size of a representative elementary volume (REV). The anisotropy of hydraulic permeability of fractured rock masses is mainly affected by orientation and the number of fracture sets, and the REV size is mainly influenced by trace length, spacing and the number of fracture sets. The results of studies on REV size and the influence of in-situ stress on hydraulic conductivity of the rock mass on the slope of Jinping-I hydropower station, China, are presented using the developed models and methods. The simulation results agreed well with the results obtained from field water-pressure measurements, with an error of less than 10 %. 相似文献
6.
Summary In this paper we develop correction factors for orientation bias when sampling rock fractures with a borehole. For a borehole with zero radius we obtain Terzaghi's result for scanline sampling: otherwise the appropriate correction factor may differ significantly from that obtained for the scanline model, depending on the relative size of the borehole and the rock fracture. Two separate cases are discussed: the sampling of fractures with a borehole and sampling with the surface of a borehole. Analytical expressions for the correction factors are graphed and tabulated. 相似文献
7.
水力压裂是提高非常规油气开采的重要手段,支撑剂位置及裂缝参数是评价压裂效果的重要因素.提出了以Gd作为示踪剂探测热中子来评价井周裂缝方法,将热中子双组扩散理论与数值模拟方法相结合,定义热中子变化参数WTN来指示裂缝宽度,并分析了岩性、井眼尺寸、地层孔隙度、地层水矿化度及含油饱和度对WTN的影响.模拟结果表明:随着裂缝宽度的增加,WTN先呈指数增加后趋于平缓;而地层孔隙度越大、地层水矿化度越小,WTN越大;井眼尺寸和地层含油饱和度的变化对WTN影响较小.利用蒙特卡罗方法建立了地层孔隙度、矿化度石灰岩地层压裂前后的数值计算模型,模拟研究了不同深度地层的热中子分布,得到了近远探测器热中子计数FAR、NEAR和WTN的响应曲线,最终处理裂缝参数结果与设定模型相吻合,验证了利用Gd示踪热中子探测方法可以来评价井周裂缝. 相似文献
8.
针对钻孔图像中岩体结构面形态特征,提出了一种基于Canny检测的岩体结构面几何信息智能测量方法。该方法首先采用灰度共生矩阵特征参数,在长幅钻孔图像中定位结构面区域;然后,对识别的结构面区域,采用Canny检测算法识别出结构面边缘,并通过边缘连接和合适的阈值筛选边缘,提取出结构面上下边缘;最后,对结构面边缘进行三角函数拟合,得到结构面上下边缘的正弦曲线,结合立体空间几何理论,从而计算出岩体结构面的倾向、倾角、隙宽等参数。以如美水电站坝址区两钻孔为例,基于本算法提取结构面几何信息,并与已有成功算法进行对比得到了较为一致的结果,证明了算法的可行性。 相似文献
9.
Fracture Length Estimation from Borehole Image Logs 总被引：1，自引：0，他引：1
Sait Ismail Özkaya 《Mathematical Geology》2003,35(6):737-753
We describe a method to estimate fracture length for circular fractures from borehole image logs. The relative frequency of fractures, which have complete circumference trace on image logs is related to fracture length. A simple functional relationship can be derived for the relative frequency of complete fracture traces in terms of average fracture inclination to borehole, borehole diameter and fracture length. This formulation however, tends to underestimate fracture length because a constant length is assumed. A more accurate length estimate can be obtained by assuming that fracture length is linearly correlated to fracture aperture or spacing. Cumulative frequency distribution of fracture aperture and spacing can be obtained from borehole image logs. The problem then transforms itself to finding the scaling factor between fracture length and aperture (or spacing) from the relative frequency of fractures with complete traces. The product of the scaling factor and average fracture spacing (or aperture) gives the average fracture length. 相似文献
10.
Double Porosity Finite Element Method for Borehole Modeling 总被引：2，自引：0，他引：2
Summary. This paper considers the mechanical and hydraulic response around an arbitrary oriented borehole drilled in a naturally fractured formation. The formation is treated as a double porosity medium consisting of the primary rock matrix as well as the fractured systems, which are each distinctly different in porosity and permeability. The poro-mechanical formulations that couple matrix and fracture deformations as well as fluid flow aspects are presented. A double porosity and double permeability finite element solution for any directional borehole drilled in the fractured porous medium is given. Compared with conventional single-porosity analyses, the proposed double-porosity solution has a larger pore pressure in the matrix and a smaller tensile stress in the near-wellbore region. The effects of time, fracture, mud weight, and borehole inclination in the double-porosity solution are parametrically studied to develop a better understanding of physical characteristics governing borehole problems. 相似文献
11.
Practical visualization of rock structure 总被引：12，自引：0，他引：12
Roland Pusch 《Engineering Geology》1998,49(3-4):231-236
The conventionally applied method for visualizing the structure of a rock mass is limited to plotting the orientation of individual discontinuities by using the Schmidt stereographic net. Their spacing is not illustrated and other structural features, such as undulation and twisting, cannot be interpreted from such sterographic views. A new mode of visual presentation of rock structural features of one or several different types in rock volumes of any size that makes all this possible is proposed in the present report. The primary purpose is to quantify, for all elements of a rock mass where the structure has been evaluated by borehole investigations or mapping in the course of underground excavation, the orientation and average spacing of defined discontinuities like hydraulically and mechanically active fractures. These local structural patterns, which are plotted on three of the six faces of cubical boxes with defined edge length and with one edge oriented N−S can be combined by applying the mathematical tool for connecting faces with which certain visualization codes like Alias Sketch are equipped. This combines different local rock structures to form regional patterns that can reveal undulation and twisting and important variations in spacing of major discrete discontinuities. Visualization can be given in true perspective or orthographic form and larger discontinuities that have been identified in the field, such as fracture zones, can be introduced in the model for correlation with smaller features. Furthermore, the stress situation at all sites where rock stress measurements have been made can be visualized in the model in the form of principal planes. The proposed models can be visualized from any “camera angle” and also shown in Quick Time VR form, i.e. as being slowly rotated around any predetermined axis. This facilitates definition and selection of the rock structure, local or regional, for numerical calculations. 相似文献
12.
裂隙岩体渗透系数确定方法研究 总被引：3，自引：0，他引：3
裂隙岩体渗透系数以及渗透主方向的确定对研究岩体渗透性大小及各向异性具有重要意义。高放废物地质处置库介质岩体的渗透性能将直接影响其使用安全性。本文运用离散裂隙网络模拟的方法对我国高放废物处置库甘肃北山预选区3#钻孔附近裂隙岩体进行了渗透性质分析。通过对3#钻孔171.5~178.0m段压水试验数据的反演,标定了离散裂隙网络渗流模型中的裂隙渗透参数(导水系数T)。利用标定的离散裂隙网络模型对场区裂隙岩体进行了渗流模拟,确定了该区域裂隙岩体的渗流表征单元体(REV)的尺寸大小以及渗透主值和主渗透方向。运用离散裂隙网络模型计算得出的渗透主值的几何均值与现场压水试验计算结果较接近,证明了计算结果的有效性。 相似文献
13.
数字钻孔摄像在小浪底帷幕灌浆检测孔中的应用 总被引：3，自引：0，他引：3
为了评价帷幕灌浆效果,将数字钻孔摄像技术应用到小浪底水利枢纽3号灌浆洞3个灌浆质量检查孔中。通过数字钻孔摄像得到的孔壁图像资料, 对钻孔内发育的节理裂隙、破碎带和砂浆充填情况进行了分析研究,结果表明：?灌浆时浆液在外压下,主要沿连通性较好、延伸较远的裂隙向孔外岩体渗透。与渗流路径相连通的裂隙或延伸较短的裂隙,被浆液直接充填凝固后形成水泥结石。与渗流路径没有连通的裂隙则被忽略,或在灌浆压力下劈裂而部分充填,造成全充填、半充填和砂浆流出等几种充填效果;?破碎带充填与否主要与破碎带的规模、性质和与灌浆洞连通性有关。小浪底水利枢纽3号灌浆洞内的灌浆效果是明显的;将数字钻孔摄像技术应用于检查帷幕灌浆质量,分析灌浆浆液渗流路径,也是可行的。 相似文献
14.
Hydraulic fracturing in permeable rock is a complicated process which might be influenced by various factors including the operational parameters (e.g., fluid viscosity, injection rate and borehole diameter) and the in situ conditions (e.g., in situ stress states and initial pore pressure level). To elucidate the effects of these variables, simulations are performed on hollow-squared samples at laboratory scale using fully coupled discrete element method. The model is first validated by comparing the stress around the borehole wall measured numerically with that calculated theoretically. Systematic parametric studies are then conducted. Modeling results reveal that the breakdown pressure and time to fracture stay constant when the viscosity is lower than 0.002 Pa s or higher than 0.2 Pa s but increases significantly when it is between 0.002 and 0.2 Pa s. Raising the injection rate can shorten the time to fracture but dramatically increase the breakdown pressure. Larger borehole diameter leads to the increase in the time to fracture and the reduction in the breakdown pressure. Higher in situ stress requires a longer injection time and higher breakdown pressure. The initial pore pressure, on the other hand, reduces the breakdown pressure as well as the time to fracture. The increase in breakdown pressure with viscosity or injection rate can be attributed to the size effect of greater tensile strength of samples with smaller infiltrated regions. 相似文献
15.
小口径钻孔窥视仪及其应用 总被引：1，自引：0，他引：1
直径为28mm的钻孔窥视仪可以送入锚杆钻孔,其输出的图像可用于孔壁的岩性识别及钻孔表面观察。实测表明,KSY—I型钻孔窥视仪在煤层顶板小孔径钻孔中可用于煤岩识别以及裂隙观察。 相似文献
16.
钻孔摄像技术能够采集到大量地下岩体内的结构面数据,分析其数据有助于进一步揭示结构面的空间分布规律和组合关系。针对钻孔内获得的结构面几何参数的特殊性,提出了综合倾角、倾向和位置深度等参数的特征点描述方法,在局部坐标系下对结构面特征点的描述方法及计算过程进行了阐述,推导出了结构面几何参数与特征点坐标之间的转换公式,在全局坐标系下对特征点坐标进行了归一化处理,最后对空间坐标系下特征点的分布规律进行了探索。研究结果表明,（1）空间坐标系下的结构面特征点是结构面几何参数和空间位置的综合反映;（2）特征点在空间的分布反映了结构面的空间组合关系。为结构面的统计分析提供新的思路和方法,有助于开展结构面的空间分布规律和交切关系研究,对钻孔摄像技术的发展和以结构面几何特征为基础的岩体稳定性评价起到积极的推动作用。 相似文献
17.
High-resolution reflection seismic imaging of the upper crust at Laxemar, southeastern Sweden 总被引：1，自引：0，他引：1
A major cost in exploring the upper 1–2 km of crystalline crust with reflection seismics is the drilling required for explosive sources. By reducing the charge size to a minimum, shallow inexpensive shotholes can be drilled with handheld equipment. Here, we present results from a full-scale test using small charges for high-resolution seismic surveying over a nuclear waste disposal study site (not an actual site). Two 2–2.5-km-long crossing profiles were acquired in December 1999 with 10-m shot and geophone spacing in the Laxemar area, near Oskarshamn in southeastern Sweden. After standard processing, including dip moveout (DMO), several subhorizontal to moderately dipping reflections are imaged. Many of the dipping ones can be correlated to fracture zones observed in a ca. 1700-m-deep borehole where the profiles cross and/or to fracture zones mapped on the surface. The imaged fracture zones form a complex 3D pattern illustrating the necessity of having 3D control before interpreting seismic reflection data. Analyses of sonic and density logs from the borehole show that greenstones have significantly higher impedances than the more dominant granite found in the borehole (granite/greenstone reflection coefficient is +0.065). These greenstones may contribute to the reflectivity when associated with fracture zones. In some cases, where they are present as larger subhorizontal lenses, they may be the dominant source of reflectivity. A set of north-dipping (10°) reflectors at 3–3.5-km depth can be correlated to a similar set observed below the island of Ävrö about 3 km to the east. 相似文献
18.
The paper presents a simple approximate analytical solution of the remote stresses that cause the collapse of a borehole or other circular cylindrical cavity in an infinite elastic space. Regions of parallel equidistant splitting cracks are assumed to form on the sides of the cavity. Their boundary is assumed to be an ellipse of a growing horizontal axis, the other axis remaining equal to the borehole diameter. The slabs of rock between the splitting cracks are assumed to buckle as slender columns, and their post-critical stress is considered as the residual stress in the cracked rock. The buckling of these slab columns is assumed to be resisted not only by their elastic bending stiffness but also shear stresses produced on rough crack faces by relative shear displacements. The energy release from the infinite medium caused by the growth of the elliptical cracking region is evaluated according to Eschelby's theorem. This release is set equal to the energy dissipated by the formation of all the splitting cracks, which is calculated under the assumption of constant fracture energy. This yields the collapse stress as a function of the elastic moduli, fracture energy, ratio of the remote principal stresses, crack shear resistance characteristic and borehole diameter. The collapse stress as a function of crack spacing is found to have a minimum, and the correct crack spacing is determined from this minimum. For small enough diameters, the crack spacing increases as the (4/5)-power of the borehole diameter, while for large enough diameters a constant spacing is approached. In contrast to plastic solutions, the breakout stress exhibits a size effect, such that for small enough diameters the breakout stress decreases as the (? 2/5)-power of the borehole diameter, while for large enough diameters a constant limiting value is approached. Finally, some numerical estimates are given and the validity of various simplifying assumptions made is discussed. 相似文献
19.
20.
岩溶探测对于岩溶发育地区的工程建设有重大意义,跨孔地震波探测是工程勘察有效的地球物理探测技术。本文旨在利用基于程函方程的初至旅行时层析方法,实现对跨孔地震波岩溶探测的反演,并通过多个工况的数值模拟验证其有效性,探索其适用性和局限性。首先,基于波动方程的时域有限差分对跨孔地震岩溶探测进行正演模拟;然后从模拟的地震记录中提取初至旅行时,最后以基于程函方程的初至层析方法反演得到钻孔间的地层速度模型。本文设置了单一溶洞,单一断层,溶洞断层组合及多溶洞组合4种工况,通过数值试验得到了地震记录、旅行时、反演图像、迭代残差等结果。结果表明基于程函方程的初至旅行时层析反演方法对溶洞位置、大小,断层的方位反演较为准确,对于复杂地质条件,多溶洞和裂隙组合反演较为稳定,相互之间干扰很小,能定性区分对溶洞填充物的速度与地层背景波速的高低。但岩溶异常体中的反演速度较真实速度有偏高,纵向分辨率比横向分辨率高。相比溶洞,该方法对断层较不敏感。考虑到基于程函方程的跨孔层析反演在多个岩溶地质体共存的复杂地质条件下依然保持高效和稳定,该方法可以为实际工程提供重要勘察信息。 相似文献