共查询到20条相似文献，搜索用时 31 毫秒
1.
The Schlinig fault at the western border of theÖtztal nappe (Eastern Alps), previously interpreted as a west-directed thrust, actually represents a Late Cretaceous, top-SE to -ESE normal fault, as indicated by sense-of-shear criteria found within cataclasites and greenschist-facies mylonites. Normal faulting postdated and offset an earlier, Cretaceous-age, west-directed thrust at the base of theÖtztal nappe. Shape fabric and crystallographic preferred orientation in completely recrystallized quartz layers in a mylonite from the Schlinig fault record a combination of (1) top-east-southeast simple shear during Late Cretaceous normal faulting, and (2) later north-northeast-directed shortening during the Early Tertiary, also recorded by open folds on the outcrop and map scale. Offset of the basal thrust of theÖtztal nappe across the Schlinig fault indicates a normal displacement of 17 km. The fault was initiated with a dip angle of 10° to 15° (low-angle normal fault). Domino-style extension of the competent Late Triassic Hauptdolomit in the footwall was kinematically linked to normal faulting.
The Schlinig fault belongs to a system of east- to southeast-dipping normal faults which accommodated severe stretching of the Alpine orogen during the Late Cretaceous. The slip direction of extensional faults often parallels the direction of earlier thrusting (top-W to top-NW), only the slip sense is reversed and the normal faults are slightly steeper than the thrusts. In the western Austroalpine nappes, extension started at about 80 Ma and was coeval with subduction of Piemont-Ligurian oceanic lithosphere and continental fragments farther west. The extensional episode led to the formation of Austroalpine Gosau basins with fluviatile to deep-marine sediments. West-directed rollback of an east-dipping Piemont-Ligurian subduction zone is proposed to have caused this stretching in the upper plate. 相似文献
2.
《Chemie der Erde / Geochemistry》2021,81(4):125803
Central Alborz Metallogenic Belt is a major mineral province of northern Iran placed at the northern margin of the Arabia-Eurasia collision zone. This study aimed to at recognition the affiliation between reverse/thrust faults and Pb-Zn carbonate-hosted mineral deposition using fractal modeling. Thrusting is the major mechanism of faulting in this region in terms of length, frequency and density. The carbonate-hosted Pb and Zn occurrence/deposit were classified using the concentration-number fractal method. All faults then are categorized based on fault density, and concentration-area fractal methods are utilized for the thrust faults. According to our analysis, main fault density zones are situated at the central and western parts of the Alborz Mountains. Relationship among the major fault density zones and the Pb-Zn carbonate-hosted occurrences/deposits using logratio matrix reveals that there is a proper connection between reverse/thrust faults and the Zn-Pb carbonate-hosted occurrences/deposits. Moreover, the results were controlled by four ore deposits/prospects in this region which shows high-grade ores directly relate to faults especially reverse/thrust faults based on their distribution. This research indicates that this method can be used for other various ore deposit types that have been distributed by faulting. 相似文献
3.
基于位场信息的伊舒地堑莫里青断陷西北缘断裂性质 总被引：2，自引：2，他引：2
伊舒地堑边缘断裂不仅控制了盆地的空间形态,而且在很大程度上控制了盆地的结构、构造发育特征和盖层沉积。本文利用1∶5万重、磁资料研究了地堑内莫里青断陷西北缘断裂性质,得出了区内NE—SW向断裂为边界主断裂,呈现出张性特征,属高角度正断层,近EW向断裂,呈现出压性特征,属高角度逆断层的结论。 相似文献
4.
Gregory A.DAVIS 《地学前缘》1999,(3):42
在过去的25年里,由于许多原因,作为最常见、分布也最广泛的地质构造形迹之一,逆冲断层成为倍受关注的科学研究主题。文中指出,关于逆冲断层及其几何学特征的许多普遍认识（或观念）,并不像以往文献中所阐述的那样简单。其中之一的"薄皮"冲断构造是受地层控制的,极少有或者没有结晶基底物的卷入。文中主张,"薄皮"一词只有逆冲板片的几何学形态含义,而不应包含地层意义,并列举了一些完全由结晶岩石所构成的薄皮逆冲构造的例子来说明这一主张。近来,逆冲双重构造成为构造文献中的热点。关于逆冲双重构造的成因,引用得最多的是1982年Boyer和Elliot在其重要论文"逆冲断层系统"中所作的解释。他们认为,双重道冲构造是通过在冲断坡底部发生下盘破裂。新生断裂不断向前扩展并进入先存断层下盘的一系列变形过程中逐渐形成的。根据Boyer和Elliot提出的这种变形过程,将形成一个具有平面状顶板断层的边冲双重构造,这个顶板断层只在活动断坡的顶部是主动向前扩展的。依笔者之见,在实际的构造变形当中,是不可能具备形成平顶过冲双重构造的地质条件的。而能对平顶过冲双重构造形成作出最好解释的是反序（out－of－sequence,OOS）边冲断层的发育,即断层向着主冲断层的后方发展,在先存道冲构造的上部? 相似文献
5.
Based on our detailed structural characterization, we examine possible relationships between thrust faults and strike-slip faults and thrust-cored folds and depositional units in the Silla Syncline, a 4 km wide fold composed of fine-grained mudstone, coarse sandstone and conglomerate deposits of the Cerro Toro Formation in the Magallanes foreland basin, Chilean Patagonia. The syncline is bounded on its western flank by an asymmetric anticline and on its eastern flank by a broad zone of thrust faults and associated folds, which are oriented sub-parallel to the syncline axis. Deposition of the coarse-grained units of the Silla Syncline appears to have taken place in this structurally defined trough controlled primarily by thrust fault related growth structures flanking the syncline.The syncline and surrounding area have also been deformed by two sets of strike-slip faults, one right-lateral and one left-lateral. The strike-slip and thrust faulting operated contemporaneously for much of their active periods, although it appears that thrust faulting, confined within the fine-grained units, initiated slightly earlier than strike-slip faulting. In addition, younger igneous intrusions at high angle to bedding generally localize along the strike-slip faults. The cross-cutting relationships among the intrusions, strike-slip faults, and flexural slip faults show that all these structures were active during the same period, which extends beyond mid-Miocene.These conclusions support the premise that structures in deep-water sediments are important for understanding not only the deformation of a foreland basin, but also its depositional architecture. 相似文献
6.
Mine development along a 15-mile (24 km) section of the Warfield Fault in Mingo County, West Virginia has broadened the geological understanding of the fault and its related structures. The fault has been exposed in two new road cuts, one in the northeast-trending segment at Neely Branch and one in the eastern east-trending segment at the head of Marrowbone Creek. Both exposures show a well-defined normal fault with a 45° to 55° N dip, juxtaposing sandstone/shale packages from the roof and the floor of the Coalburg seam. The fault is associated with a thin gouge zone, some drag folding, and parallel jointing. Its trace tends to run parallel to the crest of the adjacent Warfield Anticline. Based on underground mine development and detailed core drilling, the vertical offset along the fault plane ranges from a maximum of 240 ft (73 m) in the central part of the area near the structural bend to less than 100 ft (30 m) in western and eastern directions. The fault is located along the relatively steeply dipping (locally in excess of 25%) southern limb of the Warfield Anticline, and appears related to a late phase of extension involving folded Pennsylvanian strata. On a regional scale, the lithological variations across the fault do not suggest any appreciable strike-slip component.Underground room and pillar mines in the Coalburg seam north and south of the fault have been greatly impacted by the Warfield structures. Due to the combined (and opposite) effects of the folding and faulting, the northern mines are located up to 400 ft (125 m) higher in elevation than the southern ones. Overland conveyor belts connect mining blocks separated by the fault. The practical mining limit along the steep slopes toward the fault is around 15%. Subsidiary normal faults with offsets in the 5- to 15-ft (1.5–4.5 m) range are fairly common and form major roof control and production hurdles. Overall, the Warfield structures pose an extra challenge to mine development in this part of the Appalachian Coalfields. 相似文献
7.
The purpose of this paper is to examine the kinematic behaviour of normal fault systems and see what general conditions govern their geometrical evolution. We pay particular attention to seismological and surface data from regions of present day active normal faulting, as the instantaneous three-dimensional geometry at the time of fault movement is better known in active regions than in areas where the faults are now static.Most normal faults are concave upward, or listric. This shape can be produced by geometric constraints, either because the faults reactivate curved thrusts, or because they must be curved to accommodate rotations. Another effect which will produce curved faults is the variation of rheology with depth: brittle failure at shallow depths produces less fault rotation than does distributed creep in the lower part of the crust. An important geometric feature of normal faulting is the uplift of the footwall. The amount of such uplift is related not only to the elastic properties of the lithosphere, but also to the throw and dip of the fault. A striking feature of active normal faults is that they occur in groups in which all the faults dip in the same direction. This behaviour arises because the faults cannot intersect: if they do, one must cease to be active. The rotation which such fault systems produce reduces the dip of the faults until a new steeply dipping fault is formed. Once a new fault cuts pre-existing faults the earlier faults become locked, and a new set of faults must propagate rapidly across the whole region involved. Many of these geometric constraints also apply to thrust faulting. 相似文献
8.
The internal sectors of the Orobic Alps (Northern Italy) are characterised by Alpine age regional shortening showing a transition, through time, from plastic to brittle deformation. Thrust faults cut Alpine ductile folds and are marked by cataclasites and, locally, by pseudotachylytes, suggesting that motion was accommodated by seismic frictional slip. In the Eastern Orobic Alps the thrusting initiated at depths deeper than 10 km (the emplacement depth of the Adamello pluton) and possibly continued at shallower depths. This demonstrates that thrust motion occurred between 10 km depth and the brittle-ductile transition, i.e., at mid-crustal depths. The Orobic Alps exhumed paleoseismic zone shows different geometries along strike. In the central sectors of the Orobic Alps, thrust faults, associated with pseudotachylytes, have average dips around 40° and show no pervasive veining. Much steeper thrusts (dips up to about 85°) occur in the eastern Orobic Alps. In this area, faults are not associated with pervasive veining, i.e., fluid circulation was relatively scarce. This suggests that faulting did not occur with supralithostatic fluid pressure conditions. These reverse faults are severely misoriented (far too steep) for fault reactivation in a sublithostatic fluid pressure regime. We suggest that thrust motion likely started when the faults were less steep and that the faults were progressively rotated up to the present day dips. Domino tilting is probably responsible for this subsequent fault steepening, as suggested by a decrease of the steepness of thrust faults from north to south and by systematic rotations of previous structures consistently with tilting of thrust blocks. When the faults became inclined beyond the fault lock-up angle, no further thrusting was accommodated along them. At later stages regional shortening was accommodated by newly formed lower angle shear planes (dipping around 30–40°), consistently with predictions from fault mechanics. 相似文献
9.
Peloponnesus in the south-western part of the Aegean is formed by a heterogeneous pile of alpine thrust sheets that was reworked
by normal faulting from Upper Miocene to recent times. Upper Miocene–Lower Pliocene extension in Mt Parnon was accommodated
by several mappable brittle detachment faults that exhibit a top-to-the-NE-ENE sense of shear. The hanging wall of the detachments
comprises a number of highly tilted fault blocks containing abundant evidence of intense internal deformation by normal faulting
and layer-parallel shearing contemporaneous with faulting. These fault blocks are remnants of a cohesive extensional block
that slipped to the NE-ENE and broke up along high-angle normal faults that sole into or are cut by the detachments. The largest
part of this block is located at the eastern edge of the metamorphic core forming the hanging wall of East Parnon high-angle
normal fault that excised part of the aforementioned detachments. The lowermost metamorphic Unit of the nappe-pile does not
seem to be affected by the previous extensional episode. Upper plate reconstruction shows that various units of the nappe-pile
were affected by high-angle normal faults that linked to detachment faults in the weaker layers. Since the Middle-Upper Pliocene
further exhumation of the metamorphic rocks has resulted in the formation of high-angle normal faults overprinting Neogene
extensional structures and cut the entire nappe-pile. This new fault system tilted the earlier extensional structures and
produced a NE-SW coaxial deformation of Mt Parnon. 相似文献
10.
分析隐伏逆冲构造变形特征,揭示构造形成机制,开展构造预测,指导煤地质勘查。通过地表精细观测、二维地震勘探及钻探工程验证等综合方法,在发现并了解其形态学特征基础上,分析表层构造与深部构造耦合关系,结合古构造应力场,阐述构造成因。结果发现南北向深部隐伏逆冲构造,西倾东冲,断面倾角为20°~35°,断于石盒子组内和下伏含煤岩系及其基底内,地层垂直断距为190~260 m,水平断距260~470 m;浅部地层表现为同向展布的不对称背斜构造,二者空间上密切共生,几何学和运动学具相关性,成因上具统一性;浅层背斜构造是深层逆冲作用控制下断展褶皱作用的结果。隐伏逆冲构造是燕山运动中期盆地内部因阻抗来自东侧构造挤压应力,而产生的反向逆冲构造作用响应。该逆冲构造错断煤层,造成煤层重复,控制了煤层的空间分布,构成韩城矿区南中深部重要的构造边界。 相似文献
11.
Variability in Early Amazonian Tharsis stress state based on wrinkle ridges and strike-slip faulting
We present evidence for a decrease in the magnitude of Tharsis-circumferential compressive stress during the Late Hesperian to the Middle Amazonian based on chronologic changes in the predominant style of faulting in southern Amazonis Planitia. Using high-resolution MOLA topography, we identify a population of strike-slip faults that exhibit Middle Amazonian-aged displacements of regional chrono-stratigraphic units. These strike-slip faults are adjacent to an older population of previously documented Late Hesperian-aged thrust faults (wrinkle ridges). Along-strike orientations of these thrust and strike-slip faults reveal the Tharsis-radial stress to be the area's most compressive remote principal stress and that this stress orientation and magnitude persisted throughout the Late Hesperian to the Middle Amazonian. We show that the change in the predominant style of faulting from thrust faulting to strike-slip faulting during this time requires a decrease of the Tharsis-circumferential compressive stress to a magnitude less than lithostatic load, with negligible change in stress orientation. 相似文献
12.
通过认真、系统的地震资料解释, 我们在塔里木盆地西南坳陷首次发现晚新生代正断层。 这些正断层发育于西南坳陷的东北部, 走向 NE-SW, 剖面上组合成堑垒构造, 个别剖面上显示负花状构造特征。 正断层主要发育于新生界, 向上断至的最高层位是第四系更新统下部。 倾向相反的正断层向下交汇后断距消失, 断层继续向下延伸的情况不清楚。 根据断距 变化和生长指数计算, 正断层形成于上新世晚期, 持续演化至更新世早期。 正断层的形成演化过程与以往在阿瓦提凹陷、巴楚隆起和塘沽孜巴斯坳陷发现的晚新生代正断层基本一致, 正断层活动时间为 ca. 3～2 Ma。 它们形成于一个区域性弱伸展构造应力场, 代表印度-亚洲碰撞远程效应下, 塔里木盆地脉式挤压冲断过程中的一个构造间歇期。 相似文献
13.
准噶尔西北缘前陆冲断带三叠纪-侏罗纪逆冲断裂活动的沉积响应 总被引：10，自引：0，他引：10
笔者从冲断活动的产物———各种成因扇体(冲积扇、水下扇、扇三角洲)出发,由160口单井剖面、15条联井剖面、8个层位平面渐次展开了准噶尔西北缘前陆冲断带三叠—侏罗纪逆冲断裂活动的沉积响应研究。三叠纪扇体在乌尔禾—夏子街地区发育叠置程度最好,T1b到T3b,其由盆内向盆缘老山方向退缩迁移明显,并具T1b到T2k1由盆缘向盆内、T2k2到T3b由盆内向盆缘迁移的2个进退波动变化。侏罗纪扇体在八道湾组最为发育,总体叠置关系较差,J1b到J2t,均呈由盆内向盆缘老山退缩沉积的退覆式迁移特征。三叠纪到侏罗纪,总体为由强到弱的退覆式冲断活动及扇体迁移模式,即随主要同生控扇断裂分布由盆缘向老山方向退缩迁移,冲断活动强度由盆缘向盆地方向逐渐减弱直至停息;相应地,各期扇体平面上分布规模渐小,总体呈由盆内向盆缘老山退缩迁移的沉积响应,两者耦合性良好。各类扇体的沉积分布受不同时期同生断裂活动的严格控制,其时空叠置及迁移规律的差异是红山嘴—车排子、克拉玛依—百口泉及乌尔禾—夏子街各构造带冲断作用地域性及作用强度差异性的沉积响应。进而引入“活动性指数”的概念与方法,对前陆冲断带同生断裂的冲断活动强度进行了定量化统计分析,并根据冲断推覆事件的地层、沉积标识划分出T1b-T3b、J1b-J2x、J2t三套构造层序,识别出三叠—侏罗纪的3个逆冲推覆幕、6次逆冲推覆事件。 相似文献
14.
E. Tavarnelli 《International Journal of Earth Sciences》1996,85(2):363-371
The Umbria-Marche foreland fold-and-thrust belt in the northern Apennines of Italy provides excellent evidence to test the
hypothesis of synsedimentary-structural control on thrust ramp development. This orogenic belt consists of platform and pelagic
carbonates, Late Triassic to Miocene in age, whose deposition was controlled by significant synsedimentary extension. Normal
faulting, mainly active from Jurassic through Late Cretaceous-Paleogene time, resulted in significant lateral thickness variability
within the related stratigraphic sequences. By Late Miocene time the sedimentary cover was detached from the underlying basement
and was deformed by east-verging folds and west-dipping thrusts. Two restored balanced cross sections through the southernmost
part of the belt show a coincidence between the early synsedimentary normal faults and the late thrust fault ramps. These
evidences suggest that synsedimentary tectonic structures, such as faults and the related lithological lateral changes, can
be regarded as mechanically important controlling factors in the process of thrust ramp development during positive tectonic
inversion processes. 相似文献
15.
Hand-specimen and outcrop scale examples of folds are analyzed here to identify the characteristic signatures of fold-accommodation faults. We describe and analyze the geometric and kinematic relationships between folds and their associated faults in detail including the structural position and spatial distribution of faults within a fold, the displacement distribution along the faults by applying separation–distance plots for the outcrop scale examples, and the change of cut-off angle when the fault cut across folded layers. A comparison between fold-accommodation faults and fault related folds based on their separation–distribution plots and the problem of time sequence between faulting and folding are discussed in order to distinguish fold-accommodation faults from the reverse faults geometrically and kinematically similar to them. The analysis results show that fold-accommodation faults originate and terminate within a fold and usually do not modify the geometry of the fold because of their limited displacement. The out-of-syncline thrust has a diagnostically negative slope (separation value decreasing away from the upper fault tip) in the separation–distance graph. The change of cut-off angle and the spatial distribution of faults display a close relationship with the axial surface of the fold. Our analyses show that fold-accommodation faults are kinematically consistent with the flexural slip of the fold. The interbedded strata with competence contrast facilitate formation of fold-accommodation faults. These characteristic signatures are concluded as a set of primary identification criteria for fold-accommodation faults. 相似文献
16.
西秦岭北缘构造带的新生代构造活动——兼论对青藏高原东北缘形成过程的指示意义 总被引：8，自引：0，他引：8
西秦岭北缘构造带是青藏高原东北部一条重要的北西西向构造带,它由一组近于平行的断裂组成,中部发育活动的左旋走滑断裂,两侧发育向外扩展的多条逆冲断裂,剖面上呈向北偏心的花状构造。自古近纪中晚期以来西秦岭北缘构造带成为青藏高原早期的北东边界,其新生代构造活动控制了两侧的新生代盆地沉积演化和构造变形。在构造带南侧滩歌盆地自古近纪中晚期堆积了一套厚度较大的砾岩和砂岩地层,但未见新近纪地层;沿西秦岭北缘构造带中部在中新世形成具有剪切拉张性质的武山—漳县盆地,沉积了厚度超过千米的砾岩、砂岩和泥岩序列;在构造带北侧陇西盆地从古近纪中晚期至中新世晚期一直处于前陆盆地发育阶段,沉积了连续的新生代地层序列。在中新世晚期以后,整个构造带遭受挤压变形,逆冲活动强烈,中部的武山—漳县盆地和北侧的陇西盆地相继消亡,新生代地层发生强烈构造变形,位于构造带南侧的滩歌盆地也同时发生轻微缩短变形。第四纪晚期以来西秦岭北缘构造带断裂活动主要表现为左旋走滑运动方式,而逆冲断裂活动则迁移到了北东方向的海原断裂和香山—天景山断裂(又称中卫—同心断裂)等构造带之上,实现了大区域范围内的应变分配。 相似文献
17.
断层作用下深部开采诱发冲击地压相似试验研究 总被引：1，自引：0，他引：1
以典型断层型冲击地压矿井为例,采用相似材料模拟试验方法,基于覆岩空间结构失稳与断层活化耦合致灾原理,分析了巨型逆冲断层下盘煤层开采采场覆岩运动过程、工作面倾向支承压力及断层面的应力变化规律,研究了巨型逆冲断层影响下巨厚坚硬顶板易冲击煤层冲击地压显现特征。试验结果表明：煤层开采诱发巨型逆冲断层冲击灾变过程分为3阶段：第1阶段,受煤层采动影响,上覆岩层发生空间运动,煤体中形成明显高应力集中区;第2阶段,覆岩多层空间结构演化诱发断层活化,断层活化导致空间结构外部岩体回转,给空间结构施加外部载荷,造成空间结构失稳加剧,煤岩体的应力激增,影响范围扩大;第3阶段,断层滑移释放能量,提供动载荷。根据应力监测数据变化规律,划分了逆冲断层的明显影响区域,研究结果为断层影响下煤层开采的防冲策略与设计提供可靠依据。 相似文献
18.
采用FLAC2D数值模拟分析软件,通过流变模型和摩尔库仑弹塑性模型转换技术,研究了在水平构造应力作用下,逆断层运动过程中断层区域塑性破坏区的分布及变化规律,进而揭示了逆断层区构造煤的形成机制和分布规律。结果表明,逆断层区域的塑性破坏区域在距离断层一定范围内分布,随着远离断层而减小,且断层上盘构造煤的发育程度和范围大于下盘。研究成果可为断层区域煤与瓦斯突出防治提供借鉴。 相似文献
19.
Sabri Aridhi Kais Aridhi Mohamed Ghanmi Fouad Zargouni Eric Mercier 《Arabian Journal of Geosciences》2014,7(6):2499-2514
Bir M'Cherga-Ain Asker area, situated in the hinterland of Zaghouan thrust (Tunisian dorsal), was the land example treated with metric and cartographic scale in order to identify duplex genesis criteria and to include thrusting tectonics associated with tear faults, which are in fact the directory response generating duplex structures identified in outcrop for the first time through Tunisia in this case. Given its geological location between the "dôme" and the "dorsal" zone of Tunisia, this area was the most exposed to a highly paleostress history expressed by a huge fault system remobilization and reactivation through several tectonic events from NE–SW middle Cretaceous distension to a NW–SE and NNW–SSE Paleogene compression. Regarding fault planes generated analysis, they show numerous streak generation of normal, strike-slip, and reverse faults that go with geodynamic and paleostress evolution of the studied area; we note that each streak generation is perfectly matching with one of the tectonic event (mentioned before) affecting the area. In this paper, we analyze duplex structure elaboration scenarios to assess the involved kinematics and their geometrical recognition criterious. We propose to discuss the causes of duplex structures installation in a thrust belt system and the predictable geometrical styles after its installation on foreland or backland. Using the geometrical criteria acquired through this analysis, we will show that such, however, exceptionable structures exist on the land, and that they record the mechanisms of their genesis linked to the tear faults acting in this case. We describe "tear faults" as the sliding breaks which disunite two compartments during deformation, allowing them to undergo different independent deformations in their drawing and their width (for example more or less stretched folds). These types of faults differ from that of the true stick-slip faults, which slice and shift preformed structures (it's even this shift which makes it possible to highlight them); here, there are no shift but dissimilarity of the structures on both sides of the fault; therefore, deformations are the direct results of displacements; they are expressed in thrust belts by ramp folds, intense internal deformations, and even by complex duplex structures. A duplex feature that is not mainly studied is made up by tilted imbricate sedimentary sequences (or horses), separated by link thrusts and underlined respectively at their tops and bottoms by roof and floor thrusts. Imbrications cause a shortening, a thickening, or a thinning of stratigraphic columns and even its crushing and inverting. In thrust belts, duplexes are usually set up following two or even more deformational events; those structures start typically with decollement and imbricate sedimentary unit ones which are made cover by a roof thrust sometimes visible at outcrop. Through this paper, we suggest to discuss geometrical duplex criteria, and we will try a zooming through different scales, from regional to local one in order to show how the shape (expression) of the deformation differs. 相似文献
20.
“承德逆掩片”之商榷——来自燕山地区中元古代长城系的沉积地质证据 总被引：9，自引：1，他引：8
外来岩片不但在构造变形上应具有显著的特征标志,而且在其卷入的各类地质体中也应该表现出与原地系统之间具有明显的差异.近年来,承德地区两条断裂之间所夹地质体,被部分学者认为是晚侏罗世时期从该地区南部向北推覆而来的"逆掩片",水平位移量超过40km.本文对比研究了"逆掩片"内部和"根带区"中元古代长城系原始沉积特征和相带展布以及其他证据,发现承德地区长城系各相带原始展布和格局与周边同期沉积并无显著差别,这表明晚侏罗世期间发生自南向北大规模水平位移(＞40km)的可能性很小,研究结果不支持"外来岩片"的认识. 相似文献