首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The Weber-Davis model of the solar wind is generalized to include the effects of latitude. The principal assumptions of perfect electrical conductivity, rotational symmetry, a polytropic relation between pressure and density, and a flow aligned magnetic field in a system rotating with the Sun, are retained. A flow aligned magnetic field in the rotating system may be expressed in terms of the flow velocity and density. Rotational symmetry fixes the longitudinal flow velocity Vφ in terms of the flow in the r?θ plane. Thus, the original three dimensional magnetohydrodynamic flow problem is reduced to a two dimensional hydrodynamic flow problem in the r?θ plane.There are three critical surfaces associated with the equations which supply conditions to determine three of six required boundary conditions. The specified boundary conditions at the base of the corona are the temperature, density, and magnitude of the magnetic field. The equations are then expanded about the radial, nonrotating Parker solution and an analytic solution is obtained for the resulting first order equations. The results show that for constant coronal boundary conditions there is a latitudinal flow toward the solar poles, as a result of magnetic stresses, which persists out to large distances for the Sun. Associated with this flow is a latitudinal component of the magnetic field. The radial flow parameters are, to within small first order differences, in agreement with those of the Parker and the Weber-Davis models of the solar wind.The equations are further generalized to permit first order latitudinal variations in the specified coronal boundary conditions. Results at 1 a.u. are presented for 5 per cent latitudinal differences between the equatorial and polar values. These results show that the solution at 1 a.u. is most sensitive to a latitudinal dependence in the boundary temperature and least sensitive to a latitudinal dependence in the magnetic field magnitude.A solution is then obtained for an approximate dipolar variation in the coronal magnetic field magnitude. This solution predicts that the latitudinal flow is initially toward the Equator due to magnetic channeling; however, this effect is rapidly overcome and the latitudinal flow at 1 a.u. is toward the pole and not significantly different from the solution for constant boundary conditions.  相似文献   

2.
An array of seven atmospheric Cherenkov telescopes was commissioned at a high altitude site in Hanle in the Ladakh region of the Himalayas. The array called HAGAR has been designed to observe celestial γ-rays of energy >100 GeV. Each telescope is altitude-azimuth mounted and carries seven parabolic mirrors whose optic axes are co-aligned with the telescope axis. The telescopes point and track a celestial source using a PC-based drive control system. Two important issues in positioning of each HAGAR telescope are pointing accuracy of telescope axis and co-alignment of mirrors’ optic axes with the telescope axis. We have adopted a three pronged strategy to address these issues, namely use of pointing models to improve pointing accuracy of the telescopes, RA-DEC scan technique to measure the pointing offsets of the mirrors and mechanical fine-tuning of off-axis mirrors by sighting a distant stationary light source. This paper discusses our efforts in this regard as well as the current status of pointing and monitoring of HAGAR telescopes.  相似文献   

3.
X-ray reflectivity measurements were performed on several thin foil gold mirrors fabricated in TIFR for a Soft X-ray Imaging Telescope. The mirrors were made from thin aluminum foils with a reflecting layer of sputtered gold transferred from a smooth glass mandrel using an epoxy. X-ray reflectivity measurements were performed on a sample of randomly selected mirrors using CuK α (8.05 keV), CrK α (5.41 keV) X-rays and also at several energies in the energy range of 155–300 eV using the synchrotron source Indus-1. It was found that the roughness of the low-density top gold layer as obtained from the fitting of X-ray reflectivity data for CuK α radiation is relatively more as compared to that obtained from the CrK α radiation. This indicates that in the mirrors made by this process, the upper surfaces are smoother as compared to the deeper layers. It was also observed that the critical angle almost vanishes in the very low energy range of 290–300 eV due to strong absorption effects of the low density material sitting on top of these mirrors. Due to this absorption effect, efficiency of these mirrors reduces in this energy range. This is first time that reflectivity measurements are being reported for very soft X-rays (≤ 300 eV) for mirrors made for any X-ray astronomy mission.  相似文献   

4.
We present detailed numerical simulations of the magnetosphere of an isolated neutron star in which the spin and magnetic dipole axes of the star are aligned. We demonstrate that stable charge distributions are always found, rather than particle outflows. A stable magnetosphere consists of a dome above the polar cap containing plasma of one charge and an equatorial belt containing plasma of the other sign: E · B =0 inside both of these. These are separated by a vacuum gap in which E · B ≠0 ( ρ =0 instead). We show that the charge distribution used in the 'standard' Goldreich–Julian pulsar model is inherently unstable: it collapses to a stable configuration that is very similar to the others illustrated here. An instructive video of this collapse is available at http://spacsun.rice.edu/~ian/. For typical pulsars, the stable solution has no particles near to the light cylinder, and if there were any there then their loss from the system would not lead to a replacement from the star (in contradiction to the explicit assumption used in the Goldreich–Julian model). We discuss the generic effects of pair creation, in particular as an additional source of ionization in the vacuum gap. The overall effect is simply to reduce the value of E · B in the vacuum gap so that the pair-production rate drops towards zero. A dome, disc and gap geometry is still the resulting solution. In conclusion, we confirm previous studies that the aligned rotator cannot make an active pulsar.  相似文献   

5.
A spectrally filtered Optical Frequency Comb (OFC) laser is proposed as a versatile calibration source for astronomical spectrometers in the 1?C2 ??m spectral range. Such a source overcomes the limitations of current calibration lamps providing a uniform spectrum of equally spaced lines with similar intensity and extremely high long-term frequency stability. We present preliminary studies and results of a system which filters the OFC from a 100 MHz comb spacing to 16 GHz one, an adequate spacing for spectrometers with resolving power ????/???>30000. The first approach employs two Fabry-Perot cavities in series, made of dielectric coated mirrors, followed by a non-linear optical broadening system. The limitations of such a filtering process are discussed. These can be overcome by the second approach, based on filtering cavities with metallic coated mirrors.  相似文献   

6.
Since 60 years the common method generally used to coat astronomical mirrors is vacuum deposition of pure aluminium by evaporation. Such mirror surfaces degrade very fast resulting in a considerably reduced optical throughput. Protecting layers (oxides like SiO2, fluorides like CaF2) are not applied because their removal, necessary before realuminization, involves damage to the optical surface of the mirror substrate which would necessitate a costly refiguring of that surface. The reduction of the throughput exceeds typically 30 % for a Cassegrain system; it precludes the introduction of excellent optical design solutions in astronomy based on Schwarzschild's theory using four-reflection optics. In addition, the cost of the conventional procedure of aluminizing and its risks increase tremendously with the size of the mirrors of the very large telescopes now planned or under construction. Here I propose a three-layer composion in two forms (Fig. 1): a) stopping layer -- reflecting layer - protecting layer, or b) carrier layer - protecting layer. The stopping layer is supposed to be completely insensitive to the chemical agents dissolving or detaching the protecting (and the reflecting) layers. On the other hand, in modification b), the carrier layer is supposed to be chemically removable from the substrate, thereby detaching also the protecting (and reflecting) layer. As an example for a layer system of type a) experiments are under way with the system gold/silver/quartz on various mirror substrate materials. Quartz can be easily dissolved by fluorid acid without any damage to the gold stopping layer. Dense. pore free Al2O3+SiO2 layers without defects can be expected to protect the silver reflectance R⩾ 0.98 under real observatory conditions effectively for more than 10-20 years. In addition this protecting layer permits frequent and effective cleaning of the mirror from dust etc. The reflectance of silver exceeds that of fresh conventionally aluminized mirrors with R ≅ 0.87 for all wavelengths λ ⩾ 3370 Å. In the blue the silver mirror realizes with R = 0.995 ideal conditions for Schwarzschild optics. In the V-IR region it is with ≅ 0.99 by the factor 1.2 better than present-day mirrors.  相似文献   

7.
We report on progress in the development of the technology of nanonengineered liquid mirrors that use metal-coated viscous liquids. In a recent article, we found that viscous liquid mirrors tilted by 1° were marred by speckles that degraded their surfaces. We have now identified printtrough as the source of the speckles and offer solutions to the problem.  相似文献   

8.
In TeV -ray astronomy, large mirrors are used to collect erenkov light from electromagnetic cascades in the atmosphere in order to obtain low energy thresholds. The flux sensitivity of TeV -ray detectors is limited by background due to erenkov light bursts from isotropic, cosmic-ray showers which are much more numerous than -ray showers. It has recently been established that most of this background can be eliminated on the basis of the shapes of erenkov light images on the focal plane of a telescope. In order for this technique to work, the light collector must have adequate resolution over a relatively wide field of view. In this paper, the optical characteristics of the 10 m reflector used in the imaging detection of the Crab Nebula are examined and contrasted with those of a standard parabolic design. This 10 m reflector has a unique (Davies-Cotton) design with small spherical facet mirrors placed on spherical support structure with radius equal to exactly 1/2 the curvature radius of the facet mirrors. The off-axis focusing properties of this type of telescope have not been examined previously.  相似文献   

9.
本文提出一种新的反射镜轻量化方案。此方案在结构特征和减重比例上接近蜂窝结构,减重效果比背面开孔的镜子和拱形镜要好得多;同时又可避免蜂窝镜的制造难度。另外,本文还就此方案在空间太阳望远镜(SST)的相关跟踪摆镜上的应用进行探讨,给出了主要结构参数和镜面变形分析结果,其结果表明,此轻量化平面镜能满足SST的使用要求。  相似文献   

10.
We investigate the particle acceleration in a magnetic trap with converging mirrors, which is a constituent part of the magnetic reconnection mechanism in solar flares. We take into account the effect of Coulomb collisions on the formation of the accelerated-electron distribution function. The solution of the kinetic equation shows that the Coulomb scattering of anisotropic accelerated electrons leads to their isotropization. As a result, the fraction of trapped particles increases and the acceleration efficiency significantly rises.  相似文献   

11.
Nested thin foil reflectors have made possible light weight, inexpensive and fast grazing incidence X-ray mirrors for astronomical spectroscopy over a broad band. These mirrors were developed at Goddard for the US Shuttle program and were flown on NASA's shuttleborne Astro-l mission in December 1990. Presently, the Japan/US collaborative spectroscopic mission ASCA, nearing its third year of successful operation in earth orbit, carries, four such mirrors, weighing less than 40 kg and giving total effective areas of 1200 and 420 cm2 at l and 8 keV respectively. The 420 kg observatory is the best possible example of how conical foil mirrors opened areas of research that could not have been otherwise addressed with available resources. In this paper, we will briefly review the development and performance of our first generation foil mirrors. We will also describe progress toward improving their imaging capability to prime them for use in future instruments. Such a goal is highly desirable, if not necessary for this mirror technology to remain competitive for future applications.  相似文献   

12.
Litvinenko  Yuri E. 《Solar physics》2000,196(2):369-375
Speeds of vertical flows in quiescent solar filaments are typically much less than the local Alfvén speed. This is why the flows in filament barbs can be modeled by perturbing a magnetostatic solution describing a balance between the Lorentz force, gravity, and gas pressure in a barb. This approach explains why some of the flows are neither aligned with the magnetic field nor controlled by gravity. Both the observed upflows and the magnetic field dips in barbs are likely to be caused by photospheric magnetic reconnection.  相似文献   

13.
The recent development and data collection results of the Astrobiology Instrumentation for Meteor Imaging and Tracking (AIM-IT) system, has demonstrated an ability to point narrow field-of-view instruments at transient events such as meteors. AIM-IT uses the principle of tracking moving objects via a paired set of relay mirrors along with an integrated hardware/software solution, to acquire and track meteors in real-time. Development of the instrument has progressed from a prototype rocker-box system through more recent use of a fast response mirror system during several meteor shower campaigns. Several narrow field of view instruments have been deployed using AIM-IT including high spatial resolution video, high frame rate video, and meteor spectrographic equipment. Analysis of the imagery shows evidence for meteor fragmentation in as many as 20% of the meteors tracked thus far. The success of the AIM-IT technology in tracking meteors during their luminous flight provides a new tool in enhancing the capabilities and data volume that can be obtained with existing narrow field of view instruments.  相似文献   

14.
There is considerable interest world-wide in developing large area atmospheric Cherenkov detectors for ground-based gamma-ray astronomy. This interest stems, in large part, from the fact that the gamma-ray energy region between 20 and 250 GeV is unexplored by any experiment. Atmospheric Cherenkov detectors offer a possible way to explore this region, but large photon collection areas are needed to achieve low energy thresholds. We are developing an experiment using the heliostat mirrors of a solar power plant as the primary collecting element. As part of this development, we built a detector using four heliostat mirrors, a secondary Fresnel lens, and a fast photon detection system. In November 1994, we used this detector to record atmospheric Cherenkov radiation produced by cosmic ray particles showering in the atmosphere. The detected rate of cosmic ray events was consistent with an energy threshold near 1 TeV. The data presented here represent the first detection of atmospheric Cherenkov radiation using solar heliostats viewed from a central tower.  相似文献   

15.
An empirical kinematic method developed by Hakamada and Akasofu (1982) is calibrated on the basis of a one-dimensional MHD solution. The calibrated results are used to simulate the stream-stream interaction and the background corotating structure in a simple situation and also during 22 November–6 December 1977. The solar wind disturbances caused by solar activities during this period are then introduced into the above background stream in simulating the heliospheric disturbance event which was observed by an aligned set of spacecraft at distances between 0.6 and 1.6 a.u. The observations and the simulated results are satisfactory, and a little more refinement in the simulation could reconstruct reasonably well the data by filling the data gaps in the solar wind speed, the density and the IMF magnitude.  相似文献   

16.
The ALFA laser subsystem uses a 4 watt continuous wave laser beam to produce an artificial guide star in the mesospheric sodium layer as a reference for wavefront sensing. In this article we describe the system design, focusing on the layout of the beam relay system. It consists of seven mirrors, four of which are motor-controlled in closed loop operation accounting for turbulences inside the dome and flexure of the main telescope.The control system features several computers which are located close to analysis and control units. The distribution of the tasks and their interaction is presented, as well as the graphical user interface used to operate the complete system. This is followed by a discussion of the aircraft detection system ALIENS. This system shuts off the laser beam when an object passes close to the outgoing laser.  相似文献   

17.
详细说明了 2 .4m天文望远镜分别采用主镜焦比f/1 .5和f/3时光学系统的设计 :针对主镜焦比为f/3的凸非球面副镜 ,阐述了运用 4种不同检验方案的设计结果 ;重点介绍了计算全息法。并对几种方案作了比较  相似文献   

18.
The microquasar GRO J1655−40 has a black hole with spin angular momentum apparently misaligned to the orbital plane of its companion star. We analytically model the system with a steady-state disc warped by Lense–Thirring precession and find the time-scale for the alignment of the black hole with the binary orbit. We make detailed stellar evolution models so as to estimate the accretion rate and the lifetime of the system in this state. The secondary can be evolving at the end of the main sequence or across the Hertzsprung gap. The mass-transfer rate is typically 50 times higher in the latter case but we find that, in both the cases, the lifetime of the mass-transfer state is at most a few times the alignment time-scale. The fact that the black hole has not yet aligned with the orbital plane is therefore consistent with either model. We conclude that the system may or may not have been counter aligned after its supernova kick but that it is most likely to be close to alignment rather than counter alignment now.  相似文献   

19.
The recent detection of resolved radio emission from AG Dra by MERLIN reported by Ogley et al. is discussed in the context of the wind environment and the physical parameters and geometry of this symbiotic binary system. In particular, it is shown that the two radio components are closely aligned with the binary axis, and their separation suggests their origin in jets ejected from AG Dra during the recent 1995–98 series of oubtbursts.  相似文献   

20.
The AZT-22 telescope installed in Turkey (Antalia) was aligned and tested on stars by the Hartmann method. The rms normal deviation of an equivalent optical system is 0.040±0.016 µm. The circle of confusion is 0.40±0.04 arcsec in diameter at a 50% energy level.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号