首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 93 毫秒
1.
FLOW FIELD IN SCOURED ZONE OF CHANNEL CONTRACTIONS   总被引：1，自引：0，他引：1  
Experiments were conducted in a laboratory flume to measure the two-dimensional turbulent flow field in the scoured zone of channel contractions under a clear-water scour condition. The Acoustic Doppler Velocimeter (ADV) was used to detect the flow field at different vertical lines along the centerline of uncontracted (main channel) and contracted zones of the channel. The distributions of time-averaged velocity components, turbulent intensity, turbulent kinetic energy, and Reynolds stresses are presented in nondimensional graphical form. The bed shear stresses are computed from the measured Reynolds stresses being in threshold condition within the zone of contraction where bed was scoured. The data presented in this paper would be useful to the investigators for the development of kinematic flow model and morphological model of scour at a channel or river contraction.  相似文献   

2.
In this paper a modelling approach is presented to predict local scour under time varying flow conditions. The approach is validated using experimental data of unsteady scour at bed sills. The model is based on a number of hypotheses concerning the characteristics of the flow hydrograph, the temporal evolution of the scour and the geometry of the scour hole. A key assumption is that, at any time, the scour depth evolves at the same rate as in an equivalent steady flow. The assumption is supported by existing evidence of geometrical affinity and similarity of scour holes formed under different steady hydraulic conditions. Experimental data are presented that show the scour hole development downstream of bed sills due to flood hydrographs follow a predictable pattern. Numerical simulations are performed with the same input parameters used in the experimental tests but with no post‐simulation calibration. Comparison between the experimental and model results indicates good correspondence, especially in the rising limb of the flow hydrograph. This suggests that the underlying assumptions used in the modelling approach are appropriate. In principle, the approach is general and can be applied to a wide range of environments (e.g. bed sills, step‐pool systems) in which scouring at rapid bed elevation changes caused by time varying flows occurs, provided appropriate scaling information is available, and the scour response to steady flow conditions can be estimated. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

3.
Spur dikes are river training structures that have been extensively used worldwide for towards enhancing flood control and the stability of embankments and riverbanks.However,scour around spur dikes can be a major problem affecting their stability and hydraulic performance.The precise computation of temporal scour depth at spur dikes is very important for the design of economical and safe spur dikes.This study focuses on experimentally assessing the temporal variation of scour depth around a vertical wall spur dike and identifying the parameters,which mostly influence spur dike performance for a channel bed surface comprised of sand-gravel mixtures.In the current study,the authors did physical experiments in a flume based study to obtain new data,aimed at deriving a new predictive model for spur dike scour and comparing its performance to others found in the literature.It was found that the dimensionless temporal scour depth variation increases with an increase in(i)the threshold velocity ratio,(ii)the densimetric Froude number of the bed surface sediment mixture,(iii)the flow shallowness(defined as the ratio of the approach flow depth,y,to the spur dike’s transverse length,l),and(iv)the flow depth-particle size ratio.It is also concluded that the temporal scour depth variation in the sediment mixture is influenced by the non-uniformity of sediment and decreases with an increase in the non-uniformity of the sediment mixture.A new mathematical model is derived for the estimation of temporal scour depths in sand-gravel sediment mixtures.The proposed equation has been calibrated and validated with the experimental data,demonstrating a good predictive capacity for the estimation of temporal scour depth evolution.  相似文献   

4.
Debris flows can grow greatly in size by entrainment of bed material, enhancing their runout and hazardous impact. Here, we experimentally investigate the effects of debris‐flow composition on the amount and spatial patterns of bed scour and erosion downstream of a fixed to erodible bed transition. The experimental debris flows were observed to entrain bed particles both grain by grain and en masse, and the majority of entrainment was observed to occur during passage of the flow front. The spatial bed scour patterns are highly variable, but large‐scale patterns are largely similar over 22.5–35° channel slopes for debris flows of similar composition. Scour depth is generally largest slightly downstream of the fixed to erodible bed transition, except for clay‐rich debris flows, which cause a relatively uniform scour pattern. The spatial variability in the scour depth decreases with increasing water, gravel (= grain size) and clay fraction. Basal scour depth increases with channel slope, flow velocity, flow depth, discharge and shear stress in our experiments, whereas there is no correlation with grain collisional stress. The strongest correlation is between basal scour and shear stress and discharge. There are substantial differences in the scour caused by different types of debris flows. In general, mean and maximum scour depths become larger with increasing water fraction and grain size, and decrease with increasing clay content. However, the erodibility of coarse‐grained experimental debris flows (gravel fraction = 0.64) is similar on a wide range of channel slopes, flow depths, flow velocities, discharges and shear stresses. This probably relates to the relatively large influence of grain‐collisional stress to the total bed stress in these flows (30–50%). The relative effect of grain‐collisional stress is low in the other experimental debris flows (<5%), causing erosion to be largely controlled by basal shear stress. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

5.
Experimental study has been carried out under a clear-water scour condition to explore the local scour around semi-elliptical model bridge abutments with armor-layer bed, compared with the local scour process around semi-circular abutment. Two types of model bridge abutments, namely semi-elliptical and semi-circular abutments have been used in this experimental study. The model abutments had a ratio of streamwise length of abutment to the length of abutment transverse to the flow of 2 for semi-circular abutments and 3 for semi-elliptical abutments. In total, 50 Experiments have been designed and conducted under different flow conditions such as bed shear velocities, flow depth, and dimensions of bridge abutment model, as well as grain size of the bed material. Based on these experiments, the scour process around bridge abutments has been assessed. The dependence of the equilibrium scour depth of the scour hole on hydraulic variables has been studied. Empirical equation describing the equilibrium scour depth of the scour hole around bridge abutments has been developed.  相似文献   

6.
In this work, investigation on the development of local scour around an oblong pier in a 180 degree flume bend is presented. Scour hole can cause failure of the bridge especially during the river floods. In this study, the use of oblong collars for reducing the effects of local scour at a bridge pier is presented together with the time aspect of the scour development. Tests were conducted using one oblong pier in positions of 60degree under one flow conditions. The study was conducted using a physical hydraulic model operated under clear-water conditions in cohesionless bed material. In this study, the time development of the local scour around the oblong pier fitted with and without collar plates was studied. Investigated was the effect of size and elevation collar on the time development of scour and its efficacy at preventing scour at a bridge pier. The time development of the scour hole around the model pier with and without a collar installed was compared with similar studies on bridge piers. The results of the model study indicated that the maximum depth of scour is highly dependent on the experimental duration. It was observed that, as the minimum depth of scour occurs for the square collar at width of 3B placed at elevation of 0.1B below the bed and the size of a collar plate increases, the scour decreases. Measuring depth of scouring based on experimental observation, an empirical relation is developed with regression coefficient 95%.  相似文献   

7.
This paper examines the effect of dune migration on local scour around bridge piers. Experiments show that local scour depths fluctuate in response to the translation of dunes past the scour hole. The scour depths measured in a model study conducted in live-bed conditions contain both scour due to the pier and that due to dunes. The con' tribution from scour due to the dunes may form a significant fraction of the total scour depth measured in model investigations. Therefore, it is imperative to separate these two components of scour for analysis and comparison. The study proposes that an equilibrium or time-average scour depth normalized using pier diameter be used for analysis, and the contribution from dunes to the total scour depth be added independently. Dune size, in the absence of field or measured data, may be estimated using published predictive curves. Comparisons between computed and measured scour depths show a good correlation, and 90% of all the data tested fall within a scatter of 15%.  相似文献   

8.
Results of an experimental study on the countermeasure of scour depth at circular piers are presented. Experiments were conducted for pier scour with and without a splitter plate under a steady, uniform clear-water flow condition. The results of pier scour without splitter plate were used as a reference. Different combinations of lengths and thicknesses of splitter plates were tested attaching each of them to a pier at the upstream vertical plane of symmetry. Two different median sediment sizes (d 50 = 0.96 and 1.8 mm) were considered as bed sediment. The experimental results show that the scour depth consistently decreases with an increase in splitter plate length, while the scour depth remains independent of splitter plate thickness. In addition, temporal evolution of scour depth at piers with and without a splitter plate is observed. The best combination is found to be with a splitter plate thickness of b/5 and a length of 2b. Here, b denotes the pier diameter. An empirical formula for the estimation of equilibrium scour depth at piers with splitter plates is obtained from a multiple linear regression analysis of the experimental data. The flow fields for various combinations of circular piers with and without splitter plate including plain bed and equilibrium scour conditions were measured by using an acoustic Doppler velocimeter. The turbulent flow fields for various configurations are investigated by plotting the velocity vectors and the turbulent kinetic energy contours on vertical and horizontal planes. The splitter plate attached to the pier deflects the approach flow and thus weakens the strength of the downflow and the horseshoe vortex, being instrumental in reducing the equilibrium scour depth at piers. The proposed method of pier scour countermeasure is easy to install and cost effective as well.  相似文献   

9.
SCOUR HOLE CHARACTERISTICS BELOW FREE OVERFALL SPILLWAY   总被引：1，自引：0，他引：1  
1 INTRODUCTION Flow through hydraulic structures often issues in the form of jets. The jet velocities are usually high enough to produce sizable, even dangerous scour hole. The extent of the resulting scour depends on the nature of bed material and flow characteristics. The erosion process is quite complex and depends upon the interaction of hydraulic and morphological factors. Scouring may lead to: endangering the stability of the structure by structural failure or increased seepage, end…  相似文献   

10.
I.INTRODUCTIONhiverchannelsaresubjecttocontinuouschangeingeometryduetoillteraCtionbetWeentheflowanderodibleboundaries.Ofconcerntothedesignersofoilpipelinesacrossariver,bridgesandhydraulicworksistheproblemofscourwhichcanunderminetheStructures.Scouratsiteofbridgesandhydraulicworksoccursduetoconstrictedflowandexistenceofbridgepiers.SuchatabOfscouroccursonlyinashortsection,usuallyillthesameorderofthelengthofthehydraulicworksorbridges.Therefore,thispatternofscouriscalledlocalscour.Man}rresea…  相似文献   

11.
This paper presents the results of comprehensive laboratory experiments to investigate the effects of hooked-collar on the scour development around a vertical pier with a lenticular cross section. The flow around the pier was uniform, steady, and under the clear-water condition. The axial scour profiles for cases without and with a lenticular hooked-collar were measured and the effects of hooked-collar dimensions and elevation from the bed were examined. To compute the efficiency of hooked-colla...  相似文献   

12.
Local scour around spur-dikes   总被引：1，自引：0，他引：1  
Experimental investigations were conducted to study the effects of upstream flow conditions, sediment characteristics, and spur-dike's geometry on the maximum scour depth and scour pattern around a spur-dike. Dimensional analyses to find different non-dimensional terms affecting the phenomenon were obtained and verified with the help of the experimental data. An empirical formula for the maximum depth of scour was derived and found to be identical in form to the regime equations of Lacey and Blench.  相似文献   

13.
The turbulent flow in the local scour hole around a single non-submerged spur dyke is investigated with both experimental and numerical methods. The experiments are conducted under clear-water scour regime with an impermeable spur dyke. The scour geometry and flow velocities are measured in details with a high-resolution laser displacement meter, electro-magnetic velocimetries and PIV （Particle image velocimetry）. A 3D non-linear k-ε model is developed to simulate the complex local flow field around the scour area. The numerical model is formulated using FVM （Finite volume method） on a collocated unstructured mesh, capable of resolving complex geometries and boundaries. It is found that the simulation results are reasonably consistent with those of the experimental measurements. Based on the study results, the nature of the flow structure around a spur dyke with local scour hole is analyzed.  相似文献   

14.
Local scour around cylinders in a side-by-side or tandem arrangement under clear-water conditions is investigated numerically. Large eddy simulations with a Smagorinsky subgrid model are combined with a ghost-cell immersed boundary method, and details of the bed scouring are realized with sophisticated sediment and morphodynamic models. The scour patterns and depths in the two-cylinder cases are shown to be significantly influenced by the cylinder spacing. The features of the scour evolution, depth, and flow fields for a range of cylinder spacings are discussed. The maximum scour depth in the side-by-side cylinder cases increases as the distance between the cylinders decreases, whereas in the tandem cases, it tends to initially increase with increasing distance between the cylinders, after which it gradually decreases beyond the peak point. The maximum scour depths and trends computed using the present model show good agreement with the measured data in the literature.  相似文献   

15.
1 wrsoooCTIoxThe Yeuow mver crtes a huge amoun of sedimcht and the noods often cause raPid and severeerosinn and dePOsihon. The channl bed of the YelOw mver often exPeriences degIadation in the mainchannel during fioods. In some cases vigorous erosion uP to l0 meters takes place in a shOrt Period oftiIn. Such phenomenon usually occurs in the ndddie reaChs of the Yelow mver and its tributaries suchas the Wdse mVer the Beiluohe mver etc. For examPle, th6 hyPenconcentraed nood in July l…  相似文献   

16.
Sediment load plays a major role in the morphological evolution of rivers.Therefore,the analysis of the sediment load interaction with hydraulic structures is of main importance in order to enhance the preservation of fish habitats and river morphological characteristics.The present study analyzes the scour mechanisms downstream of a block ramp in live bed conditions,when the sediment supplied by the approaching flow is balanced by the sediment transported out of the scour hole.Experiments were performed in a model flume and the effect of the approaching sediment concentration on the scour geometry was analyzed.It was observed that the scour features depend deeply on the approaching sediment concentration and four main profile configurations were distinguished.The experimental data were analyzed and empirical relationships were developed in order to evaluate the depth and length of a scour hole,the dune height and the distance of the transversal section of maximum dune height from the ramp toe for different hydraulic and geometric conditions.It was also proved that the dynamic equilibrium shape of a scour hole does not depend on the sediment load time history.  相似文献   

17.
IINTRODUCTIONStreamflowformostriversintheworldcanberegardedasasolid-liquidtwo-phaseflow.Theexistenceofsuspendedsedimenthassomeinfluenceonthestreamflow'sphysicalandmechanicalproperties,whichinturnaffectsthestreamflow'ssedimentcarryingbehaviors(ChienandWan,1983;Chien,1989).Forriverswithrelativelylowsuspendedsedimefltconcentrations,theabove-mentionedeffectisnegligible.However,withtheincreasesinsuspendedsedimentconcentration,thiseffectbecomesincreasinglysignificant;thesediment-carryingbehavi…  相似文献   

18.
1 INTRODUCTION In alluvial streams bed scour often occurs if the sediment load is less than the transport capacity of the flow. Two types of scour are identified, namely local scour and channel bed scour. Channel bed scour can be further classified accord…  相似文献   

19.
Estimating the time evolution of a local scour hole downstream of submerged weirs can help determine the maximum scour depth and length and is essential to designing submerged weir foundations.In the current study, artificial neural networks with a backpropagation learning algorithm were used to estimate the temporal variation of scour profiles downstream of submerged weirs under clear water conditions. Physical factors, such as the flow condition, weir size, and sediment characteristics, are ge...  相似文献   

20.
To explore the seismic performance of a high-rise pile cap foundation with riverbed scour, a finite element model for foundations is introduced in the OpenSees finite element framework. In the model, a fiber element is used to simulate the pile shaft, a nonlinear p-y element is used to simulate the soil-pile interaction, and the p-factor method is used to reflect the group effects. A global and local scour model is proposed, in which two parameters, the scour depth of the same row of piles and the difference in the scour depth of the upstream pile and the downstream pile, are included to study the influence of scour on the foundation. Several elasto-plastic static pushover analyses are performed on this finite element model. The analysis results indicate that the seismic capacity (or supply) of the foundation is in the worst condition when the predicted deepest global scout depth is reached, and the capacity becomes larger when the local scour depth is below the predicted deepest global scout depth. Therefore, to evaluate the seismic capacity of a foundation, only the predicted deepest global scout depth should be considered. The method used in this paper can be also applied to foundations with other soil types.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号