首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Active faulting and seismic properties are re-investigated in the eastern precinct of the city of Thessaloniki (Northern Greece), which was seriously affected by two large earthquakes during the 20th century and severe damage was done by the 1759 event. It is suggested that the earthquake fault associated with the occurrence of the latest destructive 1978 Thessaloniki earthquake continues westwards to the 20-km-long Thessaloniki–Gerakarou Fault Zone (TGFZ), which extends from the Gerakarou village to the city of Thessaloniki. This fault zone exhibits a constant dip to the N and is characterised by a complicated geometry comprised of inherited 100°-trending faults that form multi-level branching (tree-like fault geometry) along with NNE- to NE-trending faults. The TGFZ is compatible with the contemporary regional N–S extensional stress field that tends to modify the pre-existing NW–SE tectonic fabric prevailing in the mountainous region of Thessaloniki. Both the 1978 earthquake fault and TGFZ belong to a ca. 65-km-long E–W-trending rupture fault system that runs through the southern part of the Mygdonia graben from the Strymonikos gulf to Thessaloniki. This fault system, here called Thessaloniki–Rentina Fault System (TRFS), consists of two 17–20-km-long left-stepping 100°-trending main fault strands that form underlapping steps bridged by 8–10-km-long ENE–WSW faults. The occurrence of large (M6.0) historical earthquakes (in 620, 677 and 700 A.D.) demonstrates repeated activation, and therefore the possible reactivation of the westernmost segment, the TGFZ, could be a major threat to the city of Thessaloniki. Changes in the Coulomb failure function (ΔCFF) due to the occurrence of the 1978 earthquake calculated out in this paper indicate that the TGFZ has been brought closer to failure, a convincing argument for future seismic hazard along the TGFZ.  相似文献   

2.
It is shown that the foci of the recent earthquakes in the Thessaloniki area of northern Greece are located in an arcuate seismic zone which is associated with the Serbomacedonian geologic zone. Three main lines of fracture have been observed in the epicentral area after the May–June 1978 earthquakes. Field and macroseismic observations as well as fault plane solutions for the main shock and for the largest foreshock show that both earthquakes are due to a strike slip sinistral motion with a small reverse component on a steeply dipping and trending southeast-northwest fault.  相似文献   

3.
Data for the post-Serravallian, ‘neotectonic’ evolution of the Pontides in northern Turkey indicate predominant ENE-WSW shortening with complementary NNW-SSE extension. We present a new fault plane solution for the Bartin earthquake (3 September 1968) and compare its mechanism with the movement picture of other neotectonic faults in the Pontides and northern Greece together with that of the Thessaloniki earthquake (20 May 1978). The general strain pattern exhibited by these structures agrees remarkably well with that inferred from early Tortonian-early Pleistocene structures reported from within the North Anatolian fault zone, which have been interpreted as indicating a possible reversal of the sense of movement along the North Anatolian transform fault. Here, we argue that such ‘incompatible’ structures may be related to the overall E-W shortening of Anatolia and the southern parts of the Black Sea resulting from the sideways continental escape from around the African and the Arabian promontories, rather than to hypothetical reversal of motion along the North Anatolian fault, for which there is no evidence other than the above-mentioned ‘incompatible’ structures. This new model also has important implications for seismicity and earthquake risk in regions contained within the southern part of the Black Sea plate.  相似文献   

4.
A 10-station portable seismograph network was deployed in northern Greece to study aftershocks of the magnitude (mb) 6.4 earthquake of June 20, 1978. The main shock occurred (in a graben) about 25 km northeast of the city of Thessaloniki and caused an east-west zone of surface rupturing 14 km long that splayed to 7 km wide at the west end. The hypocenters for 116 aftershocks in the magnitude range from 2.5 to 4.5 were determined. The epicenters for these events cover an area 30 km (east-west) by 18 km (north-south), and focal depths ranges from 4 to 12 km. Most of the aftershocks in the east half of the aftershock zone are north of the surface rupture and north of the graben. Those in the west half are located within the boundaries of the graben. Composite focalmechanism solutions for selected aftershocks indicate reactivation of geologically mapped normal faults in the area. Also, strike-slip and dip-slip faults that splay off the western end of the zone of surface ruptures may have been activated.The epicenters for four large (M 4.8) foreshocks and the main shock were relocated using the method of joint epicenter determination. Collectively, those five epicenters form an arcuate pattern convex southward, that is north of and 5 km distant from the surface rupturing. The 5-km separation, along with a focal depth of 8 km (average aftershock depth) or 16 km (NEIS main-shock depth), implies that the fault plane dips northward 58° or 73°, respectively. A preferred nodal-plane dip of 36° was determined by B.C. Papazachos and his colleagues in 1979 from a focal-mechanism solution for the main shock. If this dip is valid for the causal fault and that fault projects to the zone of surface rupturing, a decrease of dip with depth is required.  相似文献   

5.
In the present work a detailed seismotectonic study of the broader area of the Mygdonia basin (N. Greece) is performed. Digital data for earthquakes which occurred in the broader Mygdonia basin and were recorded by the permanent telemetric network of the Geophysical Laboratory of the Aristotle University of Thessaloniki during the period 1989–1999 were collected and fault plane solutions for 50 earthquakes which occurred in the study area were calculated with a modified first motions approach which incorporates amplitude and radiation pattern information. Fault plane solutions for the 3 main shocks of Volvi (23/05/78, MW = 5.8 and 20/06/78, MW = 6.5) and Arnaia (04/05/95, MW = 5.8) events and the 1978 aftershock sequence were additionally used. Moreover, data from two local networks established in the Mygdonia basin were also incorporated in the final dataset.Determination of the stress field was realized by the use of the method of Gephart and Forsyth [Gephart, J.W., Forsyth, D.W., 1984. An improved method for determining the regional stress tensor using earthquake focal mechanism data: application to the San Fernando earthquake sequence: Jour. Geophys. Res., v.89, no. B11, p. 9305–9320] for the stress tensor inversion and the results were compared with independent estimates based on the calculation of the average moment tensor [Papazachos, C.B.,Kiratzi, A.A., 1992. A formulation for reliable estimation of active crustal deformation and its application to central Greece. Geophys. J. Int. 111, 424–432]. The obtained stress results show a relatively good agreement between the two approaches, with differences in the azimuth of the dominant extension axis of the order of 10°. Furthermore, comparison with independent information for the mean stress axes provided by the study of kinematics on neotectonic faults [Mountrakis, D., Kilias, A., Tranos, M., Thomaidou, E., Papazachos, C., Karakaisis, G., Scordilis, E., Chatzidimitriou, P., Papadimitriou, E., Vargemezis, G., Aidona, E., Karagianni, E., Vamvakaris, D. Skarlatoudis, A. 2003. Determination of the settings and the seismotectonic behavior of the main seismic-active faults of Northern Greece area using neotectonic and seismological data. Earthquake Planning and Protection Organisation (OASP) (in Greek)] shows a similar agreement with typical misfit of the order 10°. The stress inversion method was modified in order to select one or both nodal planes of the focal mechanism which corresponds to the “true” fault plane of the occurred earthquakes and was able to select a single fault plane in the majority of examined cases. Using this approach, the obtained fault plane rose diagrams are in agreement with results from various neotectonic studies. Moreover, several secondary active fault branches were identified, which are still not clearly observed in the field.  相似文献   

6.
康西瓦断裂带晚新生代构造地貌特征及其构造意义   总被引：2，自引：0，他引：2       下载免费PDF全文
文章详细调查了康西瓦断裂带发育的断层崖、断层陡坎、地震破裂带、错断山脊、拉分盆地、挤压脊、偏心洪积扇、错断水系等新构造运动形迹,这些新构造运动形迹表明了康西瓦断裂带在晚新生代以来发生了强烈的左旋走滑运动,并兼有正滑运动分量。数字地形高程模型(DEM)分析表明康西瓦断裂西端终止于塔什库尔干谷地东部的瓦恰河谷内,东端与著名的阿尔金断裂带相连。如果以喀拉喀什河和玉龙喀什河为参照系,康西瓦断裂晚新生代以来的左旋走滑累积位移量可达 80～85km,根据断裂带 8～12mm/a的长期走滑速率,推测康西瓦断裂带新生代以来的左旋走滑运动开始于约10Ma。结合我们获得的断裂带两侧岩浆岩的年龄,表明康西瓦断裂带左旋走滑运动的开始时代为晚中新世,现今康西瓦地区的构造地貌格局很可能是中新世晚期以来强烈的左旋走滑运动形成的。  相似文献   

7.
A structural interpretation of the Ziarat block in the Balochistan region (a part of the Suleiman Fold and Thrust Belt) has been carried out using seismic and seismological data. Seismic data consists of nine 2.5D pre‐stack migrated seismic lines, whereas the seismological data covers the Fault Plane Solution and source parameters. Structural interpretation describes two broad fault sets of fore and back thrusts in the study area that have resulted in the development of pop‐up structures, accountable for the structural traps and seismicity pattern in terms of seismic hazard. Seismic interpretation includes time and depth contour maps of the Dungan Formation and Ranikot group, while seismological interpretation includes Fault Plane Solution, that is correlated with a geological and structural map of the area for the interpretation of the nature of the subsurface faults. Principal stresses are also estimated for the Ranikot group and Dungan Formation. In order to calculate anisotropic elastic properties, the parameters of the rock strength of the formations are first determined from seismic data, along with the dominant stresses (vertical, minimum horizontal, and maximum horizontal). The differential ratio of the maximum and minimum horizontal stresses is obtained to indicate optimal zones for hydraulic fracturing, and to assess the potential for geothermal energy reservoir prospect generation. The stress maps indicate high values towards the deeper part of the horizon, and low towards the shallower part, attributed to the lithological and structural variation in the area. Outcomes of structural interpretation indicate a good correlation of structure and tectonics from both seismological and seismic methods.  相似文献   

8.
琼东南盆地西部环崖南凹陷的油气勘探亟需寻找接替领域.针对勘探研究中存在的3个地质问题,利用丰富的钻井和地震资料对红河断裂活动特征及其对环崖南凹陷构造-沉积-成藏的影响开展深入分析.认为红河断裂的走滑活动通过F1断层向琼东南盆地西部传递剪切应力,其演化与环崖南凹陷的构造-沉积作用具有良好的时空耦合关系,并控制了环崖南凹陷...  相似文献   

9.
Recent seismicity in and around the Gargano Promontory, an uplifted portion of the Southern Adriatic Foreland domain, indicates active E–W strike-slip faulting in a region that has also been struck by large historical earthquakes, particularly along the Mattinata Fault. Seismic profiles published in the past two decades show that the pattern of tectonic deformation along the E–W-trending segment of the Gondola Fault Zone, the offshore counterpart of the Mattinata Fault, is strikingly similar to that observed onshore during the Eocene–Pliocene interval. Based on the lack of instrumental seismicity in the south Adriatic offshore, however, and on standard seismic reflection data showing an undisturbed Quaternary succession above the Gondola Fault Zone, this fault zone has been interpreted as essentially inactive since the Pliocene. Nevertheless, many investigators emphasised the genetic relationships and physical continuity between the Mattinata Fault, a positively active tectonic feature, and the Gondola Fault Zone. The seismotectonic potential of the system formed by these two faults has never been investigated in detail. Recent investigations of Quaternary sedimentary successions on the Adriatic shelf, by means of very high-resolution seismic–stratigraphic data, have led to the identification of fold growth and fault propagation in Middle–Upper Pleistocene and Holocene units. The inferred pattern of gentle folding and shallow faulting indicates that sediments deposited during the past ca. 450 ka were recurrently deformed along the E–W branch of the Gondola Fault Zone.We performed a detailed reconstruction and kinematic interpretation of the most recent deformation observed along the Gondola Fault Zone and interpret it in the broader context of the seismotectonic setting of the Southern Apennines-foreland region. We hypothesise that the entire 180 km-long Molise–Gondola Shear Zone is presently active and speculate that also its offshore portion, the Gondola Fault Zone, has a seismogenic behaviour.  相似文献   

10.
This paper examines the morphotectonic and structural–geological characteristics of the Quaternary Martana Fault in the Umbria–Marche Apennines fold‐and‐thrust belt. This structure is more than 30 km long and comprises two segments: a N–NNW‐trending longer segment and a 100°N‐trending segment. After developing as a normal fault in Early Pleistocene times, the N–NNW Martana Fault segment experienced a phase of dextral faulting extending from the Early to Middle Pleistocene boundary until around 0.39 Ma, the absolute age of volcanics erupted in correspondence to releasing bends. The establishment of a stress field with a NE–ENE‐trending σ3 axis and NW–NNW σ1 axis in Late Pleistocene to Holocene times resulted in a strong component of sinistral faulting along N–NNW‐trending fault segments and almost pure normal faulting on newly formed NW–SE faults. Fresh fault scarps, the interaction of faulting with drainage systems and displacement of alluvial fan apexes provide evidence of the ongoing activity of this fault. The active left‐lateral kinematic along N–NNW‐trending fault segments is also revealed by the 1.8 m horizontal offset of the E–W‐trending Decumanus road, at the Roman town of Carsulae. We interpret the present‐day kinematics of the Martana Fault as consistent with a model connecting surface structures to the inferred north‐northwest trending lithospheric shear zone marking the western boundary of the Adria Plate. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

11.
The evolution of the seismogenic process associated with the Ms 5.8 Sangro Valley earthquake of May 1984 (Abruzzo, central Italy) is closely controlled by the Quaternary extensional tectonic pattern of the area. This pattern is characterised by normal faults mainly NNW striking, whose length is controlled by pre-existing Mio–Pliocene N100±10° left-lateral strike-slip fault zones. These are partly re-activated as right-lateral normal-oblique faults under the Quaternary extensional regime and behave as transfer faults.Integration of re-located aftershocks, focal mechanisms and structural features are used to explain the divergence between the alignment of aftershocks (WSW–ENE) and the direction of seismogenic fault planes defined by the focal mechanisms (NNW–SSE) of the main shock and of the largest aftershock (Ms=5.3).The faults that appear to be involved in the seismogenic process are the NNW–SSE Barrea fault and the E–W M. Greco fault. There is field evidence of finite Quaternary deformation indicating that the normal Barrea fault re-activates the M. Greco fault as right-lateral transfer fault. No surface faulting was observed during the seismic sequence. The apparently incongruent divergence between aftershocks and nodal planes may be explained by interpreting the M. Greco fault as a barrier to the propagation of earthquake rupturing. The rupture would have nucleated on the Barrea fault, migrating along-strike towards NNW. The sharp variation in direction from the Barrea to the M. Greco fault segments would have represented a structural complexity sufficient to halt the rupture and subsequent concentration of post-seismic deformation as aftershocks around the line of intersection between the two fault planes.Fault complexities, similar to those observed in the Sangro Valley, are common features of the seismic zone of the Apennines. We suggest that the zones of interaction between NW–SE and NNW–SSE Plio-Quaternary faults and nearly E–W transfer faults, extending for several kilometres in the same way as M. Greco does, might act as barriers to the along-strike propagation of rupture processes during normal faulting earthquakes. This might have strong implications on seismic hazard, especially for the extent of the maximum magnitude expected on active faults during single rupture episodes.  相似文献   

12.
We have identified a 50-km-long active fault scarp, called herewith the Lourdes Fault, between the city of Lourdes and Arette village in the French Pyrénées. This region was affected by large and moderate earthquakes in 1660 (Io = VIII–IX, MSK 64,), in 1750 (Io = VIII, MSK 64) and in 1967 (Md = 5.3, Io = VIII, MSK 64). Most earthquakes in this area are shallow and the few available focal mechanism solutions do not indicate a consistent pattern of active deformation. Field investigations in active tectonics indicate an East–West trending and up to 50-m-high fault scarp, in average, made of 3 contiguous linear fault sub-segments. To the north, the fault controls Quaternary basins and shows uplifted and tilted alluvial terraces. Deviated and abandoned stream channels of the southern block are likely due to the successive uplift of the northern block of the fault. Paleoseismic investigations coupled with geomorphic studies, georadar prospecting and trenching along the fault scarp illustrate the cumulative fault movements during the late Holocene. Trenches exhibit shear contacts with flexural slip faulting and thrust ruptures showing deformed alluvial units in buried channels. 14C dating of alluvial and colluvial units indicates a consistent age bracket from two different trenches and shows that the most recent fault movements occurred between 4221 BC and 2918 BC. Fault parameters and paleoseismic results imply that the Lourdes Fault and related sub-segments may produce a MW 6.5 to 7.1 earthquake. Fault parameters imply that the Lourdes Fault segment corresponds to a major seismic source in the western Pyrénées that may generate earthquakes possibly larger than the 1660 historical event.  相似文献   

13.
断块大地构造与地震活动的构造物理研究   总被引：3，自引：0，他引：3       下载免费PDF全文
马瑾 《地质科学》2009,44(4):1063-1082
断块大地构造理论几乎涉及地震活动的各个方面： 1）地震记录表明不但是强震,大多数6级以上地震也分布在构造块体边界上,构造块体控制了地震分布; 2）地震活动规律体现在块体整体活动中。例如,鄂尔多斯地块周边单个断陷带的地震活跃期与平静期长短不一,无明显规律。但当把鄂尔多斯地块周边作为一个整体,其地震活动在时间上显示了准周期性; 3）地块运动通过周边断层交替活动实现。从断层活动相互作用的时间间隔和错动形式出发可把它分为强震交替活动型（又可分长时间间隔和短时间间隔两类）和强震与弱震或断层蠕动交替活动型。强震交替活动型中时间间隔很短的双震活动较早被发现。强震交替活动型中时间间隔很长的类型虽然不易识别,但是依赖于中国历史地震目录,还是发现鄂尔多斯地块周边山西断陷带与渭河断陷带在历史上的3次交替活动等; 强震与弱震或断层蠕动型的交替活动型很不容易被发现,仅在台网较密,观测条件较好的北京地区观测到。4）利用一些实验结果讨论了交替活动的规律。此外,结合断块大地构造理论对一些地震现象进行了讨论。  相似文献   

14.
The Gun Emplacement is a small but distinctive bench on the Eden–Burnside Fault Escarpment near Anstey Hill, in the northeastern suburbs of Adelaide, South Australia, occurring at an elevation of ～210–220 m asl. It is underlain by Middle Eocene North Maslin Sand and is capped by resistant, ferricreted colluvium. Paleomagnetic dating of hematitic mottles in the ferricreted colluvium, immediately underlying the emplacement, returned a Pliocene/Early Pleistocene age. This age is equivalent to that obtained for summit surface weathering. Fault scarps and exposures, including slickensides and fault gouge material, suggest that the Eden–Burnside Fault at this location has a strong en échelon pattern developed in response to reverse-sinistral oblique-slip faulting, reflecting continental stress fields. Remnants of ferricrete cappings forming stranded benches on the Eden–Burnside Fault Escarpment at elevations up to 25 m above the Gun Emplacement demonstrate recurrent tectonism of the South Mt Lofty Ranges related to intraplate deformation. There are at least four distinct ferricrete benches preserved on the eastern side of the active fault leading up from the Gun Emplacement surface. These benches demonstrate alternating periods of stability and tectonic activity disrupting and uplifting the ferricreted surfaces. A fresh surface rupture occurs and may be related to a recent seismic event.  相似文献   

15.
We perform a broadband frequency bedrock strong ground motion simulation in the Marmara Sea region (Turkey), based on several fault rupture scenarios and a source asperity model. The technique combines a deterministic simulation of seismic wave propagation at low frequencies with a semi-stochastic procedure for the high frequencies. To model the high frequencies, we applied a frequency-dependent radiation pattern model, which efficiently removes the effective dependence of the pattern coefficient on the azimuth and take-off angle as the frequency increases. The earthquake scenarios considered consist of the rupture of the closest segments of the North Anatolian Fault System to the city of Istanbul. Our scenario earthquakes involve the rupture of the entire North Anatolian Fault beneath the Sea of Marmara, namely the combined rupture of the Central Marmara Fault and North Boundary Fault segments. We defined three fault rupture scenarios based on the location of the hypocenter, selecting a preferred hypocentral location near a fault bend for each case. We analysed the effect of location of the asperity, within the Central Marmara Fault, on the subsequent ground motion, as well as the influence of anelasticity on the high-frequency attenuation characteristics. The fault and asperity parameters for each scenario were determined from empirical scalings and from results of kinematic and dynamic models of fault rupture. We calculated the resulting time series and spectra for ground motion at Istanbul and evaluated the sensitivity of the predictions to choice of model parameters. The location of the hypocenter is thus shown to be a critical parameter for determining the worst scenario earthquake at Istanbul. We also found that anelasticity has a significant effect on the regional attenuation of peak ground accelerations. Our simulated ground motions result in large values of acceleration response spectra at long periods, which could be critical for building damage at Istanbul during an actual earthquake.  相似文献   

16.
Fault dimension estimates derived from the aftershock area extent of 36 shallow depth (≤ 31 km) earthquakes that occurred in the Mediterranean Sea region have been used in order to establish empirical relationships between length, width, area and surface-wave/moment magnitude. This dataset consists of events whose aftershock sequence was recorded by a dense local or regional network and the reported location errors did not exceed on average 3–5 km. Surface-wave magnitudes for these events were obtained from the NEIC database and/or published reports, while moment magnitudes as well as focal mechanisms were available from the Harvard/USGS catalogues. Contrary to the results of some previously published studies we found no evidence in our dataset that faulting type may have an effect on the fault dimension estimates and therefore we derived relationships for the whole of the dataset. Comparisons, by means of statistical F-tests, of our relationships with other previously published regional and global relationships were performed in order to check possible similarities or differences. Most such comparisons showed relatively low significance levels (< 95%), since the differences in source dimension estimates were large mainly for magnitudes lower than 6.5, becoming smaller with increasing magnitude. Some degree of similarity, however, could be observed between our fault length relationship and the one derived from aftershock area lengths of events in Greece, while a difference was found between our regional and global fault length relationships. A calculation of the ratio defined as the fault length, derived from our relationships, to the length estimated from regional empirical relationships involving surface ruptures showed that it can take a maximum value of about 7 for small magnitudes while it approaches unity at Ms 7.2. When calculating the same ratio using instead global empirical relationships we see the maximum value not exceeding 1.8, while unity is reached at Mw 7.8, indicating the existence of a strong regional variation in the fault lengths of earthquakes occurring in the Mediterranean Sea region. Also, a relationship between the logarithms of the rupture area and seismic moment is established and it is inferred that there is some variation of stress drop as a function of seismic moment. In particular, it is observed that for magnitudes lower than 6.6 the stress drop fluctuates around 10 bar, while for larger magnitudes the stress drop reaches a value as high as 60 bar.  相似文献   

17.
We found active faults in the fold and thrust belt between Tunglo town and the Tachia River in northwestern Taiwan. The surface rupture occurred in 1999 and 1935 nearby the study area, but no historical surface rupture is recorded in this area, suggesting that the seismic energy has been accumulated during the recent time. Deformed fluvial terraces aid in understanding late Quaternary tectonics in this tectonically active area. This area contains newly identified faults that we group as the Tunglo Fault System, which formed after the area's oldest fluvial terrace and appears at least 16 km long in roughly N–S orientation. Its progressive deformations are all recorded in associated terraces developed during the middle to late Quaternary. In the north, the system consists of two subparallel active faults, the Tunglo Fault and Tunglo East Fault, striking N–S and facing each other from opposite sides of the northward flowing Hsihu River, whose course may be controlled by interactions of above-mentioned two active faults. The northern part of the Tunglo Fault, to the west of the river, is a reverse fault with upthrown side on the west; conversely the Tunglo East Fault, to the east, is also a reverse fault, but with upthrown side on the east. Both faults are marked by a flexural scarp or eastward tilting of fluvial terraces. Considering a Quaternary syncline lies subparallel to the east of this fault system, the Tunglo Fault might be originated as a bending moment fault and the Tunglo East Fault as a flexural slip fault. However, they have developed as obvious reverse faults, which have progressive deformation under E–W compressive stress field of Taiwan. Farther south, a west-facing high scarp, the Tunglo South Fault, strikes NNE–SSW, oblique to the region's E–W direction of compression. Probably due to the strain partitioning, the Tunglo South Fault generates en echelon, elongated ridges and swales to accommodate right-lateral strike–slip displacement. Other structures in the area include eastward-striking portion of the Sanyi Fault, which has no evidence for late Quaternary surface rupture on this fault; perhaps slip on this part of Sanyi Fault ceased when the Tunglo Fault System became active.  相似文献   

18.
利用高精度的三维地震资料,结合油田地质资料对永8 块断层几何学、运动学和动力学进行了研究。结果表明,该 断块为一典型东西向展布的同向叠覆型断层调节带,西侧主断层（辛120 断层）与调节断层在剖面上呈阶梯状组合样式, 东侧主断层（永105 断层）与调节断层呈地垒状组合;辛120 断层活动性减弱时,其位移量传递给永105 断层和调节断层; 力学分析认为该断层调节带是在左旋张扭构造应力场作用下形成的。通过对永8 块油气分布、油气来源以及断裂活动性与 封闭性研究,建立了永8 断层调节带油气成藏模式：主成藏期东侧主断层作为油源断层沟通了烃源灶和储集层并输导油气; 调节断层停止活动时间早形成断块圈闭,成为遮挡断层。永8 块西侧是有利滚动勘探开发区。  相似文献   

19.
汶川大地震中XI级烈度区内水井岩滑坡现场等地爆炸声、特大型滑坡现场巨大环形坑和远距离抛射碎石等记录和现象,需给出科学解释。在地震发生后多次现场地质调查和走访、样品采集和多项分析测试及其结果比较等基础上,对主中央断裂F2控制的下盘陈家坝水井岩大型滑坡体上环形坑周边不同距离范围内散落烧焦残留的硅酸盐和碳酸岩等采样后,开展了物质成分和微观结构分析。结果发现：与原生溶蚀灰岩、薄层煤岩结构和有机质成分不同,这些抛散在滑体表面的样品中富含经强烈高温作用的块石,一些成分以锰碳酸盐岩等为主的暗棕色样品中稠环芳烃是其经历过强烈热作用过程而使有机质发生环化芳构化反应的结果,即样品经过了强烈热降解作用,显示其形成时出现强烈热作用过程和高温裂解现象。结合本区地质构造特征和煤层气分布情况、地震后实施的汶川地震带深钻在穿越主中央断裂带F2深度处监测到余震过程中甲烷含量异常增高、东河口地震遗址公园发现温泉及天然气溢出等资料和研究结果,讨论了地震诱发的富含甲烷的天然气爆炸,其加剧或伴生着地震次生地质灾害。由此推测：与碳质岩或煤系共存的喀斯特溶洞中封闭煤层气在地震过程中突溢和爆炸燃烧,叠加或放大了地震作用,结果在滑坡堆积体表面残留了多处环形爆炸坑,引发了一些岩块大规模长距离水平抛撒等。研究结果对监测和认识发震断层带在地震过程中天然气爆炸诱发和加剧滑坡灾害有重要意义。  相似文献   

20.
Fault and fracture patterns associated with domal structures are observed around the world both at outcrop and in the subsurface. However, the structural evolution of domes and the influence of previous fault and fracture sets are not yet fully understood. This study provides the first structural evolution analysis of Jebel Madar, a domal outcrop in the Adam Foothills of Northern Oman, and evaluates the role of multiple local tectonic events and the associated salt diapirism on fracture and fault distribution pattern development of a salt-cored domal outcrop.Analyses at Jebel Madar suggest that three local tectonic events with different stress regimes that are tentatively linked to three regional tectonic events resulted in a salt-cored, domed, reactivated fault complex: 1) initial dome-formation and NE–SW oriented mode 1 opening fractures and subsequent grabens; 2) E–W oriented dextral strike-slip faulting; and 3) reactivation and inversion of faults, and final dome formation. Salt emplacement is associated with the first and last tectonic events.This integrated study highlights the complicated evolution of fault and fracture distribution patterns at a salt-cored dome. Caution is therefore required in interpretation of similar structural patterns on top of and around salt-cored domes.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号