共查询到20条相似文献，搜索用时 234 毫秒
1.
Minor granulites (believed to be pre-Triassic), surrounded by abundant amphibolite-facies orthogneiss, occur in the same region as the well-documented Triassic high- and ultrahigh-pressure (HP and UHP) eclogites in the Dabie–Sulu terranes, eastern China. Moreover, some eclogites and garnet clinopyroxenites have been metamorphosed at granulite- to amphibolite-facies conditions during exhumation. Granulitized HP eclogites/garnet clinopyroxenites at Huangweihe and Baizhangyan record estimated eclogite-facies metamorphic conditions of 775–805 °C and ≥15 kbar, followed by granulite- to amphibolite-facies overprint of ca. 750–800 °C and 6–11 kbar. The presence of (Na, Ca, Ba, Sr)-feldspars in garnet and omphacite corresponds to amphibolite-facies conditions. Metamorphic mineral assemblages and P– T estimates for felsic granulite at Huangtuling and mafic granulite at Huilanshan indicate peak conditions of 850 °C and 12 kbar for the granulite-facies metamorphism and 700 °C and 6 kbar for amphibolite-facies retrograde metamorphism. Cordierite–orthopyroxene and ferropargasite–plagioclase coronas and symplectites around garnet record a strong, rapid decompression, possibly contemporaneous with the uplift of neighbouring HP/UHP eclogites. Carbonic fluid (CO2-rich) inclusions are predominant in both HP granulites and granulitized HP/UHP eclogites/garnet clinopyroxenites. They have low densities, having been reset during decompression. Minor amounts of CH4 and/or N2 as well as carbonate are present. In the granulitized HP/UHP eclogites/garnet clinopyroxenites, early fluids are high-salinity brines with minor N2, whereas low-salinity fluids formed during retrogression. Syn-granulite-facies carbonic fluid inclusions occur either in quartz rods in clinopyroxene (granulitized HP garnet clinopyxeronite) or in quartz blebs in garnet and quartz matrices (UHP eclogite). For HP granulites, a limited number of primary CO2 and mixed H2O–CO2(liquid) inclusions have also been observed in undeformed quartz inclusions within garnet, orthopyroxene, and plagioclase which contain abundant, low-density CO2±carbonate inclusions. It is suggested that the primary fluid in the HP granulites was high-density CO2, mixed with a significant quantity of water. The water was consumed by retrograde metamorphic mineral reactions and may also have been responsible for metasomatic reactions (“giant myrmekites”) occurring at quartz–feldspar boundaries. Compared with the UHP eclogites in this region, the granulites were exhumed in the presence of massive, externally derived carbonic fluids and subsequently limited low-salinity aqueous fluids, probably derived from the surrounding gneisses. 相似文献
2.
Metamorphic conditions within arenaceous, calcareous and argillaceous supracrustal rocks of the Magondi Mobile Belt (Zimbabwe) range from greenschist to granulite facies. Within the high-grade segment, basement gneisses of early Proterozoic age and argillaceous rocks of the Mid-Proterozoic Piriwiri Group are intruded by charnockites and enderbites. Metamorphic mineral assemblages and thermobarometric data for enderbitic granulites of Nyaodza show temperatures of 700–800°C and pressures of 5–7 kbar for the peak of granulite-facies metamorphism. Microthermometry and Raman microspectroscopy reveal that CO 2, associated with minor N 2, has been the dominant fluid phase during granulite-facies metamorphism. The chronology of the CO 2 inclusions and the development of microtextures and mineral assemblages in the enderbites indicates that isolated negative crystal shaped CO 2 inclusions in quartz and plagioclase porphyroclasts entrap syn-metamorphic fluids of medium-high densities (0.88–0.90 g/cm 3). Lower density (0.71–0.77 g/cm 3) CO 2 inclusions in trails and clusters within the same minerals were formed from local re-equilibration and re-entrapment of the former (near-) peak granulitic CO 2 inclusions. As in many other granulites, syn-metamorphic CO 2 is associated with intrusives emplaced near the peak of metamorphism. 相似文献
3.
“Lower-crustal suite” xenoliths occur in “on-craton” and “off-craton” kimberlites located across the south-western margin of the Kaapvaal craton, southern Africa. Rock types include mafic granulite (plagioclase-bearing assemblages), eclogite (plagioclase-absent assemblages with omphacitic clinopyroxene) and garnet pyroxenite (“orthopyroxene-bearing eclogite”). The mafic granulites are subdivided into three groups: garnet granulites (cpx + grt + plag + qtz); two pyroxene garnet granulites (cpx + opx + grt + plag); kyanite granulites (cpx + grt + ky + plag + qtz). Reaction microstructures preserved in many of the granulite xenoliths involve the breakdown of plagioclase by a combination of reactions: (1) cpx + plag → grt + qtz; (2) plag → grt + ky + qtz; (3) plag → cpx (jd-rich) + qtz. Compositional zoning in minerals associated with these reactions records the continuous transition from granulite facies mineral assemblages and pressure (P) — temperature (T) conditions to those of eclogite facies. Two distinct P-T arrays are produced: (1) “off-craton” granulites away from the craton margin define a trend from 680 °C, 7.5 kbar to 850 °C, 12 kbar; (2) granulite xenoliths from kimberlites near the craton margin and “on-craton” granulites produce a trend with similar geothermal gradient but displaced to lower T by ˜ 100 °C. Both P-T fields define higher geothermal gradients than the model steady state conductive continental geotherm (40 mWm2) and are not consistent with the paleogeotherm constructed from mantle-derived garnet peridotite xenoliths. A model involving intrusion of basic magmas around the crust/mantle boundary followed by isobaric cooling is proposed to explain the thermal history of the lower crust beneath the craton margin. The model is consistent with the thermal evolution of the exposed Namaqua-Natal mobile belt low-pressure granulites and the addition of material from the mantle during the Namaqua thermal event (c. 1150 Ma). The xenolith P-T arrays are not interpreted as representing paleogeotherms at the time of entrainment in the host kimberlite. They most likely record P-T conditions “frozen-in” during various stages of the tectonic juxtaposition of the Namaqua Mobile Belt with the Kaapvaal craton. 相似文献
4.
The paper gives an overview of the phase relations in carbonic fluid inclusions with pure, binary and ternary mixtures of the system CO 2–CH 4–N 2, compositions, which are frequently found in geological materials. Phase transitions involving liquid, gas and solid phases in the temperature range between −192°C and 31°C are discussed and presented in phase diagrams ( PT, TX and VX projections). These diagrams can be applied for the interpretation of microthermometry data in order to determine fluid composition and molar volume (or density). 相似文献
5.
A combined fluid inclusion and mineral thermobarometric study in groups of synchronous inclusions in quartz within weakly foliated granites from the Chottanagpur Gneissic Complex, India, reveals super dense carbonic (CO 2 with minor CH 4 and H 2O) inclusions and hypersaline (H 2O–NaCl ± NaHCO 3) inclusions, with halite- and nahcolite daughter phases. This study documents the highest density (1.115 g cm − 3) CO 2 fluids ever reported in granites. Fluid isochores, constructed from CO 2 (± CH 4) and halite-bearing inclusions, coupled with two-feldspar thermometry constrain the minimum P–T at 8 kbar/ 750 °C for fluid entrapment in granites. By contrast, the carbonic inclusions in quartz from granite-hosted metapelite enclaves contain substantial CH 4 (up to 30 mol%), and the entrapment pressure ( 4.3 kbar/600 °C) is considerably lower compared to those in the granites. By implication, the sillimanite-free granites were not derived from the metapelitic enclaves, and instead were formed by partial melting of fluid-heterogeneous lower crustal protoliths, with fluid entrapment at magmatic conditions. 相似文献
6.
Fluid inclusion studies in rocks from the Lower Proterozoic granulites from western Hoggar (Algeria) provide new evidence for the hypothesis that a CO 2-rich, H 2O-poor fluid was present during the high-grade metamorphism. CO 2 inclusions represent the main fluid trapped in the Ihouhaouene ultrahigh-temperature (over 1000 °C) and high-pressure (10 to 14 kbar) granulites. The microthermometric and Raman microspectrometric measurements indicate that the carbonic fluid is mainly composed of CO 2 with minor amounts of CH 4 and N 2 detected in some inclusions (< 4 mol% CH 4). Carbonic fluid densities range from 1.18 to 0.57 g/cm 3. The highest densities are recorded in superdense carbonic inclusions presenting evidence of the earliest trapping and they correspond to the fluid densities expected for the P–T conditions of the peak of metamorphism in the area previously determined from mineral geothermobarometers. Lower densities of carbonic fluids mainly result from the reequilibration of earlier trapped fluid inclusions during retrograde metamorphism and final uplift of the metamorphic terrane, but a new influx of carbonic fluids during the retrograde event remains possible. Carbonic fluids can be produced in situ from decarbonation reactions in interlayered impure marbles during the prograde event or derived from CO 2 flushing from underlying basic intrusions. The aqueous fluids present large variations of composition (0.5 to 30 wt.% NaCl equivalent) and densities (1.16 to 0.57 g/cm 3). They clearly correspond to post-metamorphic fluids because they mainly occur along microfractures, they do not show any evidence of immiscibility with the carbonic fluids and mixed aquo-carbonic inclusions have not been observed. The percolation of aqueous fluids is related to the Pan-African tectonometamorphic event. 相似文献
7.
Amphiboles containing up to 4.2 wt.% Cl are found in felsic granulites from Yanzihe within the North Dabie area of the Dabie–Sulu ultrahigh- and high-pressure metamorphic belt in eastern China. Most amphibole grains show considerable zonations with Cl contents ranging from 0 to 4.2 wt.%. Based on their textural features, amphiboles can be divided into four generations: (1) amphibole occurring as inclusions in orthopyroxene (Am-in) with Cl contents around 3.5 wt.%; (2) amphibole forming cores of grains in the matrix (AM-I) with Cl contents between 3.0 and 4.2 wt.%; (3) amphibole with Cl contents of 0.2 to 2.5 wt.% (Am-II) occurring as hydrothermally altered parts of the original amphibole; (4) Cl-free amphibole (Am-III) usually developed at the outermost rim of the grain. Major and rare earth elements show significant variations for Am-I, Am-II and Am-III. Different generations of amphiboles are related to different metamorphic stages of the granulite in Yanzihe, and provide a monitor for fluid/rock interactions and P–T evolution during the high-pressure metamorphism of Dabie Shan. Pressure and temperature estimates suggest that Am-in was formed during prograde metamorphism of 10 kbar and 700–800 °C; Am-I was formed under peak metamorphic conditions (20 kbar, 800–960 °C), whereas Am-II and Am-III were formed during retrograde metamorphic stages (560–770 °C and 5–7 kbar, and 520–670 °C and <5 kbar, respectively). In contrast to most previous studies, in which the earliest amphiboles to form are typically Cl-poor and later amphiboles become progressively Cl-rich, we show that the earliest amphiboles in the investigated rock are Cl-rich and later formed amphiboles are Cl-poor. The present study also demonstrates that the fluid system of the granulites in North Dabie Shan did not evolve in a simple way: while it behaved as a closed system during prograde and peak metamorphism, after the metamorphic peak it probably acted as an open system in which new fluids were introduced. The varying magnitude of Cl contents in amphiboles stresses the very local fluid control during metamorphism. 相似文献
8.
A detailed fluid inclusion study has been carried out on the hydrocarbon-bearing fluids found in the peralkaline complex, Lovozero. Petrographic, microthermometric, laser Raman and bulk gas data are presented and discussed in context with previously published data from Lovozero and similar hydrocarbon-bearing alkaline complexes in order to further understand the processes which have generated these hydrocarbons. CH 4-dominated inclusions have been identified in all Lovozero samples. They occur predominantly as secondary inclusions trapped along cleavage planes and healed fractures together with rare H 2O-dominant inclusions. They are consistently observed in close association with either arfvedsonite crystals, partially replaced by aegirine, aegirine crystals or areas of zeolitization. The majority of inclusions consist of a low-density fluid with CH 4 homogenisation temperatures between −25 and −120 °C. Those in near-surface hand specimens contain CH 4+H 2 (up to 40 mol%)±higher hydrocarbons. However, inclusions in borehole samples contain CH 4+higher hydrocarbons±H 2 indicating that, at depth, higher hydrocarbons are more likely to form. Estimated entrapment temperatures and pressures for these inclusions are 350 °C and 0.2–0.7 kbar. A population of high-density, liquid, CH 4-dominant inclusions have also been recorded, mainly in the borehole samples, homogenising between −78 and −99 °C. These consist of pure CH 4, trapped between 1.2 and 2.1 kbar and may represent an early CH 4-bearing fluid overprinted by the low-density population. The microthermometric and laser Raman data are in agreement with bulk gas data, which have recorded significant concentrations of H 2 and higher hydrocarbons up to C 6H 12 in these samples. These data, combined with published isotopic data for the gases CH 4, C 2H 6, H 2, He and Ar indicate that these hydrocarbons have an abiogenic, crustal origin and were generated during postmagmatic, low temperature, alteration reactions of the mineral assemblage. This would suggest that these data favour a model for formation of hydrocarbons through Fischer–Tropsch type reactions involving an early CO 2-rich fluid and H 2 derived from alteration reactions. This is in contrast to the late-magmatic model suggested for the formation of hydrocarbons in the similar peralkaline intrusion, Ilímaussaq, at temperatures between 400 and 500 °C. 相似文献
9.
Grossular–wollastonite–scapolite calc–silicate granulites from Maligawila in the Buttala klippe, which form part of the overthrusted rocks of the Highland Complex of Sri Lanka, preserve a number of spectacular coronas and replacement textures that could be effectively used to infer their P–T–fluid history. These textures include coronas of garnet, garnet–quartz, and garnet–quartz–calcite at the grain boundaries of wollastonite, scapolite, and calcite as well as calcite–plagioclase and calcite–quartz symplectites or finer grains after scapolite and wollastonite respectively. Other textures include a double rind of coronal scapolite and coronal garnet between matrix garnet and calcite. The reactions that produced these coronas and replacement textures, except those involving clinopyroxene, are modelled in the CaO–Al 2O 3–SiO 2–CO 2 system using the reduced activities. Calculated examples of T– XCO2 and P– XCO2 projections indicate that the peak metamorphic temperature of about 900–875 °C at a pressure of 9 kbar and the peak metamorphic fluid composition is constrained to be low in XCO2 (0.1< XCO2<0.30). Interpretation of the textural features on the basis of the partial grids revealed that the calc–silicate granulites underwent high-temperature isobaric cooling, from about 900–875 °C to a temperature below 675 °C, following the peak metamorphism. The late-stage cooling was accompanied by an influx of hydrous fluids. The calc–silicate granulites provide evidence for high-temperature isobaric cooling in the meta-sediments of the Highland Complex, earlier considered by some workers to be confined exclusively to the meta-igneous rocks. The coronal scapolite may have formed under open-system metasomatism. 相似文献
10.
As is typical of ultra-high pressure (UHP) terrains, the regional extent of the UHP terrain in the Dabieshan of central China is highly speculative, since the volume of eclogites and paragneisses preserving unequivocal evidence of coesite and/or diamond stability is very small. By contrast, the common garnet ( XMn=0.18–0.45)–phengite (Si=3.2–3.35)–zoned epidote (Ps 38–97)–biotite–titanite–two feldspars–quartz assemblages in the more extensive orthogneisses have been previously thought to have formed under low P– T conditions of ca. 400±50°C at 4 kbar. However, certain orthogneiss samples preserve garnets with XCa up to 0.50, rutile inclusions within titanite or epidote and relict phengite inclusions within epidote with Si contents p.f.u. of up to 3.49 — overlapping with the highest values (3.49–3.62) recorded for phengites in samples of undoubted UHP schists. These and other mineral composition features (such as A-site deficiencies in the highest Si phengites, Na in garnets linked to Y+Yb substitution and Al F Ti −1 O −1 substitution in titanites) are taken to be pointers towards the orthogneisses having experienced a similar metamorphic evolution to the associated UHP schists and eclogites. Re-evaluated garnet–phengite and garnet–biotite Fe/Mg exchange thermometry and calculated 5 rutile+3 grossular+2SiO 2+H 2O=5 titanite+2 zoisite equilibria indicate that the orthogneisses may indeed have followed a common subduction-related clockwise P– T path with the UHP paragneisses and eclogites through conditions of Pmax at ca. 690°C–715°C and 36 kbar to Tmax at ca. 710°C–755°C and 18 kbar, prior to extensive re-crystallisation and re-equilibration of these ductile orthogneisses at ca. 400°C–450°C and 6 kbar. The consequential conclusion, that it is no longer necessary to resort to models of tectonic juxtapositioning to explain the spatial association of these Dabieshan orthogneisses with undoubted UHP lithologies, has far-reaching implications for the interpretation of controversial gneiss–eclogite relationships in other UHP metamorphic terrains. 相似文献
11.
The Chinese Continental Scientific Drilling (CCSD) main drill hole (0–3000 m) in Donghai, southern Sulu orogen, consists of eclogite, paragneiss, orthogneiss, schist and garnet peridotite. Detailed investigations of Raman, cathodoluminescence, and microprobe analyses show that zircons from most eclogites, gneisses and schists have oscillatory zoned magmatic cores with low-pressure mineral inclusions of Qtz, Pl, Kf and Ap, and a metamorphic rim with relatively uniform luminescence and eclogite-facies mineral inclusions of Grt, Omp, Phn, Coe and Rt. The chemical compositions of the UHP metamorphic mineral inclusions in zircon are similar to those from the matrix of the host rocks. Similar UHP metamorphic P– T conditions of about 770 °C and 32 kbar were estimated from coexisting minerals in zircon and in the matrix. These observations suggest that all investigated lithologies experienced a joint in situ UHP metamorphism during continental deep subduction. In rare cases, magmatic cores of zircon contain coesite and omphacite inclusions and show patchy and irregular luminescence, implying that the cores have been largely altered possibly by fluid–mineral interaction during UHP metamorphism. Abundant H2O–CO2, H2O- or CO2-dominated fluid inclusions with low to medium salinities occur isolated or clustered in the magmatic cores of some zircons, coexisting with low-P mineral inclusions. These fluid inclusions should have been trapped during magmatic crystallization and thus as primary. Only few H2O- and/or CO2-dominated fluid inclusions were found to occur together with UHP mineral inclusions in zircons of metamorphic origin, indicating that UHP metamorphism occurred under relatively dry conditions. The diversity in fluid inclusion populations in UHP rocks from different depths suggests a closed fluid system, without large-scale fluid migration during subduction and exhumation. 相似文献
12.
In order to identify and characterise fluids associated with metamorphic rocks from the Chaves region (North Portugal), fluid inclusions were studied in quartz veinlets, concordant with the main foliation, in graphitic-rich and nongraphitic-rich lithologies from areas with distinct metamorphic grade. The study indicates multiple fluid circulation events with a variety of compositions, broadly within the C–H–O–N–salt system. Primary fluid inclusions in quartz contain low salinity aqueous–carbonic, H 2O–CH 4–N 2–NaCl fluids that were trapped near the peak of regional metamorphism, which occurred during or immediately after D2. The calculated P– T conditions for the western area of Chaves (CW) is P=300–350 MPa and T500 °C, and for the eastern area (CE), P=200–250 MPa and T=400–450 °C. A first generation of secondary fluid inclusions is restricted to discrete cracks at the grain boundaries of quartz and consists of low salinity aqueous–carbonic, H 2O–CO 2–CH 4–N 2–NaCl fluids. P– T conditions from the fluid inclusions indicate that they were trapped during a thermal event, probably related with the emplacement of the two-mica granites. A second generation of secondary inclusions occurs in intergranular fractures and is characterised by two types of aqueous inclusions. One type is a low salinity, H2O–NaCl fluid and the second consists of a high salinity, H2O–NaCl–CaCl2 fluid. These fluid inclusions are not related to the metamorphic process and have been trapped after D3 at relatively low P (hydrostatic)–T conditions (P<100 MPa and T<300 °C). Both the early H2O–CH4–N2–NaCl fluids in quartz from the graphitic-rich lithologies and the later H2O–CO2–CH4–N2–NaCl carbonic fluid in quartz from graphitic-rich and nongraphitic-rich lithologies seem to have a common origin and evolution. They have low salinity, probably resulting from connate waters that were diluted by the water released from mineral dehydration during metamorphism. Their main component is water, but the early H2O–CH4–N2–NaCl fluids are enriched in CH4 due to interaction with the C-rich host rocks. From the early H2O–CH4–N2–NaCl to the later aqueous–carbonic H2O–CO2–CH4–N2–NaCl fluids, there is an enrichment in CO2 that is more significant for the fluids associated with nongraphitic-rich lithologies. The aqueous–carbonic fluids, enriched in H2O and CH4, are primarily associated with graphitic-rich lithologies. However, the aqueous–carbonic CO2-rich fluids were found in both graphitic and nongraphitic-rich units from both the CW and CE studied areas, which are of medium and low metamorphic grade, respectively. 相似文献
13.
Coarse-grained whiteschist, containing the assemblage: garnet+kyanite+phengite+talc+quartz/coesite, is an abundant constituent of the ultrahigh-pressure metamorphic (UHPM) belt in the Kulet region of the Kokchetav massif of Kazakhstan. Garnet displays prograde compositional zonation, with decreasing spessartine and increasing pyrope components, from core to rim. Cores were recrystallized at T=380°C (inner) to 580°C (outer) at P<10 kbar (garnet–ilmenite geothermometry, margarite+quartz stability), and mantles at T=720–760°C and PH20=34–36 kbar (coesite+graphite stability, phengite geobarometer, KFMASH system reaction equilibria). Textural evidence indicates that rims grew during decompression and cooling, within the Qtz-stability field. Silica inclusions (quartz and/or coesite) of various textural types within garnets display a systematic zonal distribution. Cores contain abundant inclusions of euhedral quartz (type 1 inclusions). Inner mantle regions contain inclusions of polycrystalline quartz pseudomorphs after coesite (type 2), with minute dusty micro-inclusions of chlorite, and more rarely, talc and kyanite in their cores; intense radial and concentric fractures are well developed in the garnet. Intermediate mantle regions contain bimineralic inclusions with coesite cores and palisade quartz rims (type 3), which are also surrounded by radial fractures. Subhedral inclusions of pure coesite without quartz overgrowths or radial fractures (type 4) occur in the outer part of the mantle. Garnet rims are silica-inclusion-free. Type 1 inclusions in garnet cores represent the low-P, low-T precursor stage to UHPM recrystallization, and attest to the persistence of low-P assemblages in the coesite-stability field. Coesites in inclusion types 2, 3, and 4 are interpreted to have sequentially crystallized by net transfer reaction (kyanite+talc=garnet+coesite+H2O), and were sequestered within the garnet with progressively decreasing amounts of intragranular aqueous fluid. During the retrograde evolution of the rock, all three inclusion types diverged from the host garnet P–T path at the coesite–quartz equilibrium, and followed a trajectory parallel to the equilibrium boundary resulting in inclusion overpressure. Coesite in type 2 inclusions suffered rapid intragranular H2O-catalysed transformation to quartz, and ruptured the host garnet at about 600°C (when inclusion P27 kbar, garnet host P9 kbar). Instantaneous decompression to the host garnet P–T path, passed through the kyanite+talc=chlorite+quartz reaction equilibrium, resulting in the dusty micro-assemblage in inclusion cores. Type 3 inclusions suffered a lower volumetric proportion transformation to quartz at the coesite–quartz equilibrium, and finally underwent rupture and decompression when T<400°C, facilitating coesite preservation. Type 4 coesite inclusions are interpreted to have suffered minimal transformation to quartz and proceeded to surface temperature conditions along or near the coesite–quartz equilibrium boundary. 相似文献
14.
Eclogite lenses in the Agualada Unit (western Ordenes Complex, Spain) contain the peak mineral assemblage garnet (prograde rim: Alm = 48 mol%, Prp = 30 mol%), omphacite (Jd max = 36 mol%), quartz, rutile and rare zoisite, which equilibrated at T = 700 °C and P > 12–14 kbar. Garnet shows discontinuous growth zoning, with a pyrope-poor intermediate zone (Alm = 51 mol%, Prp = 10 mol%) between a core zone where pyrope is slightly higher (Alm = 46 mol%, Prp = 16 mol%) and areas just inward from the rims where the maximum pyrope contents (Alm = 48 mol%, Prp = 30 mol%) are recorded. In atoll interiors, garnet contains inclusions of a first generation of omphacite (Jd max = 40 mol%). This omphacite is replaced in the matrix by a second generation (Jd max = 36 mol%) with higher Fe/Fe + Mg ratio. The compositions of garnet and omphacite suggest a complex syneclogitic tectonothermal evolution for the Agualada Unit, characterized by: (1) eclogite-facies metamorphism ( T = 585 °C, P > 12–13 kbar), followed by (2) cooling during a slight decompression ( T = 500 °C, P > 11–12 kbar), and (3) a final increase in P and T to form the garnet rim-matrix omphacite mineral assemblage. The Agualada Unit is part of a subduction complex which affected the Gondwana margin at the beginning of the Variscan cycle. The P-T evolution of the Agualada eclogites is closely related to the structural evolution of the accretionary complex and the whole orogenic wedge. The cooling event recorded by the Agualada eclogites may have resulted from the accretion of a new colder crustal slice under the unit, whereas the final progradation reflects the emplacement of the Agualada Unit directly under the mantle wedge. This evolution fits well with previously presented the retical models, both for the tectonothermal evolution of accretionary complexes and for the dynamic evolution of orogenic wedges. P-T paths such as the one for the Agualada Unit eclogites, probably reflect a prolonged structural evolution. Although evidently rarely preserved, such paths are probably the rule rather than the exception during plate convergence. 相似文献
15.
Although hydrocarbon-bearing fluids have been known from the alkaline igneous rocks of the Khibiny intrusion for many years, their origin remains enigmatic. A recently proposed model of post-magmatic hydrocarbon (HC) generation through Fischer-Tropsch (FT) type reactions suggests the hydration of Fe-bearing phases and release of H 2 which reacts with magmatically derived CO 2 to form CH 4 and higher HCs. However, new petrographic, microthermometric, laser Raman, bulk gas and isotope data are presented and discussed in the context of previously published work in order to reassess models of HC generation. The gas phase is dominated by CH 4 with only minor proportions of higher hydrocarbons. No remnants of the proposed primary CO 2-rich fluid are found in the complex. The majority of the fluid inclusions are of secondary nature and trapped in healed microfractures. This indicates a high fluid flux after magma crystallisation. Entrapment conditions for fluid inclusions are 450–550 °C at 2.8–4.5 kbar. These temperatures are too high for hydrocarbon gas generation through the FT reaction. Chemical analyses of rims of Fe-rich phases suggest that they are not the result of alteration but instead represent changes in magma composition during crystallisation. Furthermore, there is no clear relationship between the presence of Fe-rich minerals and the abundance of fluid inclusion planes (FIPs) as reported elsewhere. δ 13C values for methane range from − 22.4‰ to − 5.4‰, confirming a largely abiogenic origin for the gas. The presence of primary CH 4-dominated fluid inclusions and melt inclusions, which contain a methane-rich gas phase, indicates a magmatic origin of the HCs. An increase in methane content, together with a decrease in δ 13C isotope values towards the intrusion margin suggests that magmatically derived abiogenic hydrocarbons may have mixed with biogenic hydrocarbons derived from the surrounding country rocks. 相似文献
16.
Three types of fluid inclusions have been identified in olivine porphyroclasts in the spinel harzburgite and lherzolite xenoliths from Tenerife: pure CO 2 (Type A); carbonate-rich CO 2–SO 2 mixtures (Type B); and polyphase inclusions dominated by silicate glass±fluid±sp±silicate±sulfide±carbonate (Type C). Type A inclusions commonly exhibit a “coating” (a few microns thick) consisting of an aggregate of a platy, hydrous Mg–Fe–Si phase, most likely talc, together with very small amounts of halite, dolomite and other phases. Larger crystals (e.g. (Na,K)Cl, dolomite, spinel, sulfide and phlogopite) may be found on either side of the “coating”, towards the wall of the host mineral or towards the inclusion center. These different fluids were formed through the immiscible separations and fluid–wall-rock reactions from a common, volatile-rich, siliceous, alkaline carbonatite melt infiltrating the upper mantle beneath the Tenerife. First, the original siliceous carbonatite melt is separated from a mixed CO 2–H 2O–NaCl fluid and a silicate/silicocarbonatite melt (preserved in Type A inclusions). The reaction of the carbonaceous silicate melt with the wall-rock minerals gave rise to large poikilitic orthopyroxene and clinopyroxene grains, and smaller neoblasts. During the metasomatic processes, the consumption of the silicate part of the melt produced carbonate-enriched Type B CO 2–SO 2 fluids which were trapped in exsolved orthopyroxene porphyroclasts. At the later stages, the interstitial silicate/silicocarbonatite fluids were trapped as Type C inclusions. At a temperature above 650 °C, the mixed CO 2–H 2O–NaCl fluid inside the Type A inclusions were separated into CO 2-rich fluid and H 2O–NaCl brine. At T<650 °C, the residual silicate melt reacted with the host olivine, forming a reaction rim or “coating” along the inclusion walls consisting of talc (or possibly serpentine) together with minute crystals of NaCl, KCl, carbonates and sulfides, leaving a residual CO 2 fluid. The homogenization temperatures of +2 to +25 °C obtained from the Type A CO 2 inclusions reflect the densities of the residual CO 2 after its reactions with the olivine host, and are unrelated to the initial fluid density or the external pressure at the time of trapping. The latter are restricted by the estimated crystallization temperatures of 1000–1200 °C, and the spinel lherzolite phase assemblage of the xenolith, which is 0.7–1.7 GPa. 相似文献
17.
Petrologic data on the paragenesis of (I) kyanite-zoisite marbles and (II) garnet-chloritoid quartz-mica schists are presented with the goal of providing constraints on the pressure-temperature evolution of the Eclogite Zone, Tauern Window, Austria. The peak metamorphic assemblages in the two rock types are: (I) kyanite + zoisite + dolomite + quartz; zoisite + muscovite + dolomite + calcite + quartz; and (II) garnet + chloritoid + kyanite + muscovite + quartz + epidote ± dolomite ± Zn-staurolite. The estimated peak metamorphic conditions are 19 ± 2 kbar, 590 ± 20°C. Secondary alteration of the kyanite-zoisite marbles was accomplished in two stages. The early stage resulted in the production of margarite, paragonite, secondary muscovite and chlorite and the later stage resulted in the formation of sudoite (a di/trioctahedral Mg---Al layer silicate) and kaolinite. The early alteration is bracketed at conditions between 3 and 10 kbar, 450–550°C and the later alteration between 200 and 350°C, P 3 kbar. The P-T path is characterized by maximum burial to approximately 19 kbar (60–70 km) (at≈590°C), followed by nearly isothermal decompression to approximately 10 kbar (30 km), and then more gradual decompression with cooling to approximately 3 kbar (10 km). Alteration was apparently accomplished by the influx of H2O-rich fluids, with the composition of the fluid locally buffered by the mineral assemblage. 相似文献
18.
Within the metamorphic basement of the Coastal Cordillera of central Chile, the Western Series constitutes the high-pressure (HP)/low-temperature (LT) part (accretionary prism) of a fossil-paired metamorphic belt dominated by metagreywackes. In its eastern part, blocks derived from small lenses of garnet amphibolite with a blueschist facies overprint are locally intercalated and associated with serpentinite and garnet mica-schist. Continuously developed local equilibria were evaluated applying various independent geothermobarometric approaches. An overall anticlockwise PT path results. The prograde path evolved along a geothermal gradient of 15 °C/km, passing the high-pressure end of greenschist facies until a transient assemblage developed within albite-epidote amphibolite facies transitional to eclogite facies at peak metamorphic conditions (600–760 °C, 11–16.5 kbar; stage I). This peak assemblage was overprinted during an external fluid infiltration by an epidote blueschist facies assemblage at 350–500 °C, 10–14 kbar (stage II) indicating nearly isobaric cooling. The retrograde equilibration stage was dated with a Rb–Sr mineral isochron at 305.3±3.2 Ma, somewhat younger (296.6±4.7 Ma) in an adjacent garnet mica-schist. Localized retrograde equilibration continued during decompression down to 300 °C, 5 kbar. The retrograde evolution is identical in the garnet amphibolite and the garnet mica-schist. The counterclockwise PT path contrasts the usual clockwise PT paths derived from rocks of the Western Series. In addition, their ages related to stage II are the oldest recorded within the fossil wedge at the given latitude. Its “exotic” occurrence is interpreted by the path of the earliest and deepest subducted material that was heated in contact with a still hot mantle. Later accreted and dehydrated material caused hydration and cooling of the earliest accreted material and the neighbouring mantle. After this change also related to rheological conditions, effective exhumation of the early subducted material followed at the base of the hydrated mantle wedge within a cooler environment (geothermal gradient around 10–15 °C/km) than during its burial. The exotic blocks thus provide important time markers for the onset of subduction mass circulation in the Coastal Cordillera accretionary prism during the Late Carboniferous. Continuous subduction mass flow lasted for nearly 100 Ma until the Late Triassic. 相似文献
19.
In order to provide mantle and crustal constraints during the evolution of the Colombian Andes, Sr and Nd isotopic studies were performed in xenoliths from the Mercaderes region, Northern Volcanic Zone, Colombia. Xenoliths are found in the Granatifera Tuff, a deposit of Cenozoic age, in which mantle- and crustal-derived xenoliths are present in bombs and fragments of andesites and lamprophyres compositions. Garnet-bearing xenoliths are the most abundant mantle-derived rocks, but websterites (garnet-free xenoliths) and spinel-bearing peridotites are also present in minor amounts. Amphibolites, pyroxenites, granulites, and gneisses represent the lower crustal xenolith assemblage. Isotopic signatures for the mantle xenoliths, together with field, petrographic, mineral, and whole-rock chemistry and pressure–temperature estimates, suggest three main sources for these mantle xenoliths: garnet-free websterite xenoliths derived from a source region with low P and T (16 kbar, 1065 °C) and MORB isotopic signature, 87Sr/ 86Sr ratio of 0.7030, and 143Nd/ 144Nd ratio of 0.5129. Garnet-bearing peridotite and websterite xenoliths derived from two different sources in the mantle: i) a source with intermediate P and T (29–35 kbar, 1250–1295 °C) conditions, similar to that of sub-oceanic geotherm, with an OIB isotopic signature ( 87Sr/ 86Sr ratio of 0.7043 and 143Nd/ 144Nd ratio of 0.5129); and ii) another source with P and T conditions similar to those of a sub-continental geotherm (>38 kbar, 1140–1175 °C) and OIB isotopic characteristics ( 87Sr/ 86Sr ratio=0.7041 and 143Nd/ 144Nd ratio=0.5135). 相似文献
20.
Because of late metamorphic and tectonic overprints, the reconstruction of prograde parts of P– T paths is often difficult. In the SW Variscan French Massif Central, the Thiviers-Payzac Unit (TPU) is the uppermost allochthon emplaced above underlying units. The TPU experienced a Barrovian metamorphism coeval with a top-to-the-NW ductile shearing (D2 event) in Early Carboniferous times ( ca. 360–350 Ma). The tectonic setting of the D2 event, compression or synconvergence extension, remains unclear. Using the THERMOCALC software and the model system MnNCKFMASH, the peak P– T conditions are estimated from garnet rims and matrix minerals and the prograde evolution is deduced from garnet core compositions. The combination of these two approaches demonstrates that the TPU experienced pressure and temperature increases before reaching peak conditions at 6.6–9.0 +/− 1.2 kbar and 615–655 +/− 35 °C. This kind of P– T path shows that the regional D2 event corresponds to crustal thickening. 相似文献
|
