共查询到20条相似文献，搜索用时 190 毫秒
1.
Experimental investigation on seismic behavior of scoured bridge pier with pile foundation 
下载免费PDF全文
下载免费PDF全文 This study investigated the seismic performance and soil‐structure interaction of a scoured bridge models with pile foundation by shaking table tests using a biaxial laminar shear box. The bridge pier model with pile foundation comprised a lumped mass representing the superstructure, a steel pier, and a footing supported by a single aluminum pile within dry silica sand. End of the pile was fixed at the bottom of the shear box to simulate the scenario that the pile was embedded in a firm stratum of rock. The bridge pier model was subjected to one‐directional shakes, including white noise and earthquake records. The performance of the bridge pier model with pile foundation was discussed for different scoured conditions. It is found that the moment demand of pile increases with the increase of scoured depth whereas the moment demand of the bridge pier decreases, and this transition may induce the bridge failure mechanism transform from pier to pile. The seismic demand on scoured pile foundations may be underestimated and misinterpreted to a certain degree. When evaluating the system damping ratio with SSI, the system response may not be significantly changed even if the soil viscous damping contribution is varied. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
2.
This paper investigates the behavior and the failure mechanism of a double deck bridge constructed in China through nonlinear time history analysis.A parametric study was conducted to evaluate the influence of different structural characteristics on the behavior of the double deck bridge under transverse seismic motions,and to detect the effect of bidirectional loading on the seismic response of this type of bridge.The results showed that some characteristics,such as the variable lateral stiffness,the foundation modelling,and the longitudinal reinforcement ratio of the upper and lower columns of the bridge pier bents have a major impact on the double deck bridge response and its failure mechanism under transverse seismic motions.It was found that the soft story failure mechanism is not unique to the double deck bridge and its occurrence is related to some conditions and structural characteristics of the bridge structure.The analysis also showed that the seismic vulnerability of the double deck bridge under bi-directional loading was severely increased compared to the bridge response under unidirectional transverse loading,and out-of-phase movements were triggered between adjacent girders. 相似文献
3.
A continuum model for the interaction analysis of a fully coupled soil–pile–structure system under seismic excitation is presented in this paper. Only horizontal shaking induced by harmonic SH waves is considered so that the soil–pile–structure system is under anti‐plane deformation. The soil mass, pile and superstructure were all considered as elastic with hysteretic damping, while geometrically both pile and structures were simplified as a beam model. Buildings of various heights in Hong Kong designed to resist wind load were analysed using the present model. It was discovered that the acceleration of the piled‐structures at ground level can, in general, be larger than that of a free‐field shaking of the soil site, depending on the excitation frequency. For typical piled‐structures in Hong Kong, the amplification factor of shaking at the ground level does not show simple trends with the number of storeys of the superstructure, the thickness and the stiffness of soil, and the stiffness of the superstructure if number of storeys is fixed. The effect of pile stiffness on the amplification factor of shaking is, however, insignificant. Thus, simply increasing the pile size or the superstructure stiffness does not necessarily improve the seismic resistance of the soil–pile–structure system; on the contrary, it may lead to excessive amplification of shaking for the whole system. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
4.
基于相同土层结构地基条件下,分别采用低承台群桩-独柱墩与高承台群桩-独柱墩结构,完成了两次可液化场地群桩-土-桥梁结构地震反应振动台试验,据此研究了承台型式对桥梁桩-柱墩地震反应的影响。研究表明,与高承台桩相比,可液化场地中低承台桩的抗震性能更优;地震中砂层尚未液化或液化不充分时,低承台更多表现出减弱桩尤其桩上段的加速度反应的作用,相反高承台更多起到放大桩的加速度作用,而高承台桩与低承台桩的峰值应变自下而上更多表现出逐渐增大趋势;即使砂层完全液化时,低承台桩的峰值应变自下而上仍以渐增为主;与低承台桩相比,高承台桩更有助于放大墩顶加速度、位移反应,对结构体系整体稳定性产生了不良影响;虽然低承台桩未出现严重破坏,但砂层中部桩的应变却很大,液化砂土-桩运动相互作用对桩的抗震性能影响不容忽视。 相似文献
5.
Probabilistic performance assessment requires the development of probability distributions that can predict different performance levels of structures with reasonable accuracy. This study evaluates the performance of a non-seismically designed multi-column bridge bent retrofitted with four different alternatives, and based on their performance under an ensemble of earthquake records it proposes accurate prediction models and distribution fits for different performance criteria as a case study. Here, finite element methods have been implemented where each retrofitting technique has been modeled and numerically validated with the experimental results. Different statistical distributions are employed to represent the variation in the considered performance criteria for the retrofitted bridge bents. The Kolmogorov-Smirnov goodness-of-fit test was carried out to compare different distributions and find the suitable distribution for each performance criteria. An important conclusion drawn here is that the yield displacement of CFRP, steel, and ECC jacketed bridge bents are best described by a gamma distribution. The crushing displacement and crushing base shear of all four retrofitted bent follow a normal and Weibull distribution, respectively. A probabilistic model is developed to approximate the seismic performance of retrofitted bridge bents. These probabilistic models and response functions developed in this study allow for the performance prediction of retrofitted bridge bents. 相似文献
6.
A large-scale 20.5 m long asymmetric two-span reinforced concrete bridge was tested to failure using the shake table system
at the University of Nevada Reno. Upon completion of testing, in depth analytical modeling was conducted to evaluate the accuracy
of conventional methods in reproducing the bridge model response and to develop a model for further study. Utilizing the experimentally
verified computer model, the system effect was investigated, comparing the system and response of individual bents as well
as the response of several other bridge models. In comparing computational model of the shake table specimen and models of
the individual bents with tributary mass, it was shown that for all of the columns in this study, there was generally not
an increase in hysteretic energy or large displacement cycles from system response at given displacement demand. The response
of the bents for each high amplitude test motion was also compared. It was shown that there were significant differences in
the bent demands for a given excitation due to system effects. In addition to the shake table model, four bridge systems with
a constant total lateral stiffness were used in a parametric study to determine the system effect. The symmetric and uniform
versions of the bridge specimen were shown to be comparable in nonlinear performance to the bridge specimen for the same high
amplitude demand. The failure progression of the bridge model and the analytical comparisons suggested that the reserve capacity
from varied column heights could provide a beneficial substructure redundancy. 相似文献
7.
This paper presents a three-dimensional (3D) continuum nonlinear analysis of the Meloland Road Overpass (MRO) near El Centro, California. The modeling methodology and the computational tools are discussed in detail. The performance of the computational model is evaluated by comparing the computed responses with the responses recorded at the bridge site during the 1979 Imperial Valley and 2010 El Mayor-Cucapah earthquakes. Amongst the recorded earthquake events at the bridge site, these two events caused the strongest shaking. The comparison shows that the 3D model is potentially an effective tool for detailed analysis of a full bridge system including foundation soils, pile foundations, embankments, supporting columns, and the bridge structure itself in a unified system without relying on any ancillary models such as Winkler springs. Additional response parameters such as displacements, rockings, and bending moments are also evaluated although none of these was measured during the seismic events. 相似文献
8.
冲刷造成桩周土体的剥蚀将会削弱土体对桩基的侧向支撑能力,冲刷效应会对桥梁桩基的地震易损性产生影响,因此有必要对冲刷和地震共同作用下桥梁桩基的易损性进行研究。利用SAP2000软件建立三维桥梁有限元模型,通过非线性时程分析得到桥梁桩基地震响应峰值。采用概率性地震需求分析方法,建立不同冲刷深度下桥梁桩基地震易损性模型,在地震易损性函数假设为对数正态分布函数的基础上,通过回归分析得到概率模型中的参数,进而得到不同冲刷深度下桥梁桩基在不同破坏状态所对应的地震易损性曲线,并分析冲刷深度对桩基破坏概率的影响。研究结果表明:随着冲刷深度的增加,桥梁桩基在地震作用下的破坏概率显著增加。 相似文献
9.
Shake table test of soil-pile groups-bridge structure interaction in liquefiable ground 总被引：2，自引：1，他引：1
<正>This paper describes a shake table test study on the seismic response of low-cap pile groups and a bridge structure in liquefiable ground.The soil profile,contained in a large-scale laminar shear box,consisted of a horizontally saturated sand layer overlaid with a silty clay layer,with the simulated low-cap pile groups embedded.The container was excited in three E1 Centra earthquake events of different levels.Test results indicate that excessive pore pressure(EPP) during slight shaking only slightly accumulated,and the accumulation mainly occurred during strong shaking.The EPP was gradually enhanced as the amplitude and duration of the input acceleration increased.The acceleration response of the sand was remarkably influenced by soil liquefaction.As soil liquefaction occurred,the peak sand displacement gradually lagged behind the input acceleration;meanwhile,the sand displacement exhibited an increasing effect on the bending moment of the pile,and acceleration responses of the pile and the sand layer gradually changed from decreasing to increasing in the vertical direction from the bottom to the top.A jump variation of the bending moment on the pile was observed near the soil interface in all three input earthquake events.It is thought that the shake table tests could provide the groundwork for further seismic performance studies of low-cap pile groups used in bridges located on liquefiable groun. 相似文献
10.
The effects of soil‐structure interaction on the seismic response of multi‐span bridges are investigated by means of a modelling strategy based on the domain decomposition technique. First, the analysis methodology is presented: kinematic interaction analysis is performed in the frequency domain by means of a procedure accounting for radiation damping, soil–pile and pile‐to‐pile interaction; the seismic response of the superstructure is evaluated in the time domain by means of user‐friendly finite element programs introducing suitable lumped parameter models take into account the frequency‐dependent impedances of the soil–foundation system. Second, a real multi‐span railway bridge longitudinally restrained at one abutment is analyzed. The input motion is represented by two sets of real accelerograms: one consistent with the Italian seismic code and the other constituted by five records characterized by different frequency contents. The seismic response of the compliant‐base model is compared with that obtained from a fixed‐base model. Pile stress resultants due to kinematic and inertial interactions are also evaluated. The application demonstrates the importance of performing a comprehensive analysis of the soil–foundation–structure system in the design process, in order to capture the effects of soil‐structure interaction in each structural element that may be beneficial or detrimental. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
11.
12.
Ario Ceccotti Carmen Sandhaas Minoru Okabe Motoi Yasumura Chikahiro Minowa Naohito Kawai 《地震工程与结构动力学》2013,42(13):2003-2021
Multi‐storey buildings made of cross‐laminated timber panels (X‐lam) are becoming a stronger and economically valid alternative in Europe compared with traditional masonry or concrete buildings. During the design process of these multi‐storey buildings, also their earthquake behaviour has to be addressed, especially in seismic‐prone areas such as Italy. However, limited knowledge on the seismic performance is available for this innovative massive timber product. On the basis of extensive testing series comprising monotonic and reversed cyclic tests on X‐lam panels, a pseudodynamic test on a one‐storey X‐lam specimen and 1D shaking table tests on a full‐scale three‐storey specimen, a full‐scale seven‐storey building was designed according to the European seismic standard Eurocode 8 and subjected to earthquake loading on a 3D shaking table. The building was designed with a preliminary action reduction factor of three that had been derived from the experimental results on the three‐storey building. The outcomes of this comprehensive research project called ‘SOFIE – Sistema Costruttivo Fiemme’ proved the suitability of multi‐storey X‐lam structures for earthquake‐prone regions. The buildings demonstrated self‐centring capabilities and high stiffness combined with sufficient ductility to avoid brittle failures. The tests provided useful information for the seismic design with force‐based methods as defined in Eurocode 8, that is, a preliminary experimentally based action reduction factor of three was confirmed. Valid, ductile joint assemblies were developed, and their importance for the energy dissipation in buildings with rigid X‐lam panels became evident. The seven‐storey building showed relatively high accelerations in the upper storeys, which could lead to secondary damage and which have to be addressed in future research. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
13.
《地震工程与结构动力学》2018,47(6):1460-1477
This paper presents the development, experimental testing, and numerical modelling of a new hybrid timber‐steel moment‐resisting connection that is designed to improve the seismic performance of mid‐rise heavy timber moment‐resisting frames (MRF). The connection detail incorporates specially designed replaceable steel links fastened to timber beams and columns using self‐tapping screws. Performance of the connection is verified through experimental testing of four 2/3 scale beam‐column connections. All 4 connection specimens met the acceptance criteria specified in the AISC 341‐10 provisions for steel moment frames and exhibit high strength, ductility, and energy dissipation capacity up to storey drifts exceeding 4%. All of the timber members and self‐tapping screw connections achieved their design objective, remaining entirely elastic throughout all tests and avoiding brittle modes of failure. To assess the global seismic performance of the newly developed connection in a mid‐rise building, a hybrid timber‐steel building using the proposed moment‐resisting connection is designed and modelled in OpenSees. To compare the seismic performance of the hybrid MRF with a conventional steel MRF, a prototype steel‐only building is also designed and modelled in OpenSees. The building models are subject to a suite of ground motions at design basis earthquake and maximum credible earthquake hazard levels using non‐linear time history analysis. Analytical results show that drifts and accelerations of the hybrid building are similar to a conventional steel building while the foundation forces are significantly reduced for the hybrid structure because of its lower seismic weight. The results of the experimental program and numerical analysis demonstrate the seismic performance of the proposed connection and the ability of the hybrid building to achieve comparable seismic performance to a conventional steel MRF. 相似文献
14.
液化场地桩-土-桥梁结构动力相互作用振动台试验研究进展 总被引：20，自引：3，他引：20
本文在全面归纳与总结液化场地桩－土－桥梁结构动力相互作用振动台试验及与之相关领域的国内外研究进展基础上，直接针对我国桥梁工程中的主要震害问题，提出在我国开展液化场地桩－土－桥梁结构动力相互作用振动台试验研究的必要性，并阐述作者对液化场地桩－土－张桥梁结构动力相互作用振动台试验中若干问题的认识。 相似文献
15.
The purpose of this paper is to investigate the effects of liquefaction on modal parameters (frequency and damping) of pile‐supported structures. Four physical models, consisting of two single piles and two 2 × 2 pile groups, were tested in a shaking table where the soil surrounding the pile liquefied because of seismic shaking. The experimental results showed that the natural frequency of pile‐supported structures may decrease considerably owing to the loss of lateral support offered by the soil to the pile. On the other hand, the damping ratio of structure may increase to values in excess of 20%. These findings have important design consequences: (a) for low‐period structures, substantial reduction of spectral acceleration is expected; (b) during and after liquefaction, the response of the system may be dictated by the interactions of multiple loadings, that is, horizontal, axial and overturning moment, which were negligible prior to liquefaction; and (c) with the onset of liquefaction due to increased flexibility of pile‐supported structure, larger spectral displacement may be expected, which in turn may enhance P‐delta effects and consequently amplification of overturning moment. Practical implications for pile design are discussed. Copyright © 2013 John Wiley & Sons, Ltd. 相似文献
16.
Seismicity is known to contribute to landscape denudation through its role in earthquake‐triggered slope failure; but little is known about how the intensity of seismic ground motions, and therefore triggering of slope failures, may change through time. Topography influences the intensity of seismic shaking – generally steep slopes amplify shaking more than flatter slopes – and because glacial erosion typically steepens and enlarges slopes, glaciation may increase the intensity of seismic shaking of some landforms. However, the effect of this may be limited until after glaciers retreat because valley ice or ice‐caps may damp seismic ground motions. Two‐dimensional numerical models (FLAC 6.0) were used to explore how edifice shape, rock stiffness and various levels of ice inundation affect edifice shaking intensity. The modelling confirmed that earthquake shaking is enhanced with steeper topography and at ridge crests but it showed for the first time that total inundation by ice may reduce shaking intensity at hill crests to about 20–50% of that experienced when no ice is present. The effect is diminished to about 80–95% if glacier ice level reduces to half of the mountain slope height. In general, ice cover reduced shaking most for the steepest‐sided edifices, for wave frequencies higher than 3 Hz, and when ice was thickest and the rock had shear stiffness well in excess of the stiffness of ice. If rock stiffness is low and shear‐wave velocity is similar to that of ice, the presence of ice may amplify the shaking of rock protruding above the ice surface. The modelling supports the idea that topographic amplification of earthquake shaking increases as a result of glacial erosion and deglaciation. It is possible that the effect of this is sufficient to have influenced the distribution of post‐glacial slope failures in glaciated seismically active areas. Copyright © 2012 John Wiley & Sons, Ltd. 相似文献
17.
Based on the requirement of seismic reinforcement of bridge foundation on slope in the Chengdu-Lanzhou railway project, a shaking table model test of anti-slide pile protecting bridge foundation in landslide section is designed and completed. By applying Wenchuan seismic waves with different acceleration peaks, the stress and deformation characteristics of bridge pile foundation and anti-slide pile are analyzed, and the failure mode is discussed. Results show that the dynamic response of bridge pile and anti-slide pile are affected by the peak value of seismic acceleration of earthquake, with which the stress and deformation of the structure increase. The maximum dynamic earth pressure and the moment of anti-slide piles are located near the sliding surface, while that of bridge piles are located at the top of the pile. Based on the dynamic response of structure, local reinforcement needs to be carried out to meet the requirement of the seismic design. The PGA amplification factor of the surface is greater than the inside, and it decreases with the increase of the input seismic acceleration peak. When the slope failure occurs, the tension cracks are mainly produced in the shallow sliding zone and the coarse particles at the foot of the slope are accumulated. 相似文献
18.
Seismic performance of an unreinforced masonry building: An experimental investigation 总被引：1，自引：0，他引：1
This paper presents the results of an experimental investigation carried out to investigate the seismic performance of a two storey brick masonry house with one room in each floor. A half‐scale building constructed using single wythe clay brick masonry laid in cement sand mortar and a conventional timber floor and timber roof clad with clay tiles was tested under earthquake ground motions on a shaking table, first in the longitudinal direction and then in the transverse direction. In each direction, the building was subjected to different ground motions with gradually increasing intensity. Dynamic properties of the system were assessed through white‐noise tests after each ground motion. The building suffered increasing levels of damage as the excitations became more severe. The damage ranged from cracking to global/local rocking of different piers and partial out‐of‐plane failure of the walls. Nevertheless, the building did not collapse under base excitations with peak ground acceleration up to 0.8g. General behaviour of the tested building model during the tests is discussed, and fragility curves are developed for unreinforced masonry buildings based on the experimental results. Copyright © 2009 John Wiley & Sons, Ltd. 相似文献
19.
Shaking table test and numerical simulation of a 1/2‐scale self‐centering reinforced concrete frame 下载免费PDF全文
下载免费PDF全文 Self‐centering reinforced concrete frames are developed as an alternative of traditional seismic force‐resisting systems with better seismic performance and re‐centering capability. This paper presents an experimental and computational study on the seismic performance of self‐centering reinforced concrete frames. A 1/2‐scale model of a two‐story self‐centering reinforced concrete frame model was designed and tested on the shaking table in State Key Laboratory of Disaster Reduction in Civil Engineering at Tongji University to evaluate the seismic behavior of the structure. A structural analysis model, including detailed modeling of beam–column joints, column–base joints, and prestressed tendons, was constructed in the nonlinear dynamic modeling software OpenSEES. Agreements between test results and numerical solutions indicate that the designed reinforced concrete frame has satisfactory seismic performance and self‐centering capacity subjected to earthquakes; the self‐centering structures can undergo large rocking with minor residual displacement after the earthquake excitations; the proposed analysis procedure can be applied in simulating the seismic performance of self‐centering reinforced concrete frames. To achieve a more comprehensive evaluation on the performance of self‐centering structures, research on energy dissipation devices in the system is expected. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
20.
Although batter pile foundations are widely used in civil engineering structures, their behavior under seismic loadings is not yet thoroughly understood. This paper provides insights about the differences in the behavior of batter and vertical piles under seismic soil-pile-superstructure interaction. An experimental dynamic centrifuge program is presented, where the influences of the base shaking signal and the height of the gravity center of the superstructure are investigated. Various seismic responses are analyzed (displacement and rotation of the pile cap, total shear force at the pile cap level, overturning moment, residual bending moment, total bending moment and axial forces in piles). It is found that in certain cases batter piles play a beneficial role on the seismic behavior of the pile foundation system. The performance of batter piles depends not only on the characteristics of the earthquakes (frequency content and amplitude) but also on the type of superstructures they support. This novel experimental work provides a new experimental database to better understand the behavior of batter pile foundations in seismic regions. 相似文献