共查询到20条相似文献，搜索用时 31 毫秒
1.
2.
Hydrological modeling aims to place the disposal of water actors, very simple tools for hydrological simulation to start with, the basic observations made on rainfall until the reproduction of the response the flow of a basin. The aims of this work consist, first, of testing the model GR4J (Génie Rural à 4 paramètres Journalier) performances of the rain-flow in semi-arid environment watershed and secondly, of highlighting the contribution of new optimization techniques (genetic algorithm, Gauss-Newton) in determining the optimal parameters of the model. The results obtained show that those methods of optimization are robust and reliable in comparison with the “solver” optimization used in Excel that usually applies for GR4J model. In terms of the model performances, we obtained a very satisfying results. Also, the simulations clearly show the influence of the melting snow on the Ourika’s basin flows; indeed, taking into account this component in the model allowed a consecutive improvement of the simulations. 相似文献
3.
数据的组织是建立三维可视化模型的关键,数据组织的好坏对整个可视化系统的性能有着直接的影响,而组织数据的核心问题又是几何模型的表达。介绍了三维模型数据组织方法,应用该方法在Delphi 环境下结合OpenGL 成功开发了三维边坡信息系统,从而验证了该数据组织方法的正确性和可行性。 相似文献
4.
Transmission electron microscopy of various natural and synthetic sapphirines shows the existence of extensive polytypic variation in some samples. In addition to the previously described 1Tc and 2M polytypes, 3Tc, 4M and 5Tc structures are observed. The structural principles underlying the polytypism and the associated diffraction behaviour are reviewed, and the correlation between the nature of the observed stacking faults and their origin during crystal growth, in deformation or as a result of solid-state transformation is discussed. Pairs of c/2 partial dislocations observed in synthetic material provide a likely solid-state transformation mechanism, although the evidence suggests that most observed stacking variation arises during growth.A new type of non-conservative planar defect has been found in sapphirine from Finero, Italy, suggestive of unit-cell scale intergrowth with a surinamite- or pyroxene-like structure. A polysomatic model of the sapphirine and surinamite structures as stackings of pyroxene P and spinel S modules is proposed. 相似文献
5.
Hydrological models are necessary tools for simulating the water cycle and for understanding changes in water resources. To achieve realistic model simulation results, real-world observations are used to determine model parameters within a “calibration” procedure. Optimization techniques are usually applied in the model calibration step, which assures a maximum similarity between model outputs and observations. Practical experiences of hydrological model calibration have shown that single-objective approaches might not be adequate to tune different aspects of model simulations. These limitations can be as a result of (i) using observations that do not sufficiently represent the dynamics of the water cycle, and/or (ii) due to restricted efficiency of the applied calibration techniques. To address (i), we assess how adding daily Total Water Storage (dTWS) changes derived from the Gravity Recovery And Climate Experiment (GRACE) as an extra observations, besides the traditionally used runoff data, improves calibration of a simple 4-parameter conceptual hydrological model (GR4J, in French: modèle du Génie Rural à 4 paramètres Journalier) within the Danube River Basin. As selecting a proper calibration approach (in ii) is a challenging task and might have significant influence on the quality of model simulations, for the first time, four evolutionary optimization techniques, including the Non-dominated Sorting Genetic Algorithm II (NSGA-II), the Multi-objective Particle Swarm Optimization (MPSO), the Pareto Envelope-Based Selection Algorithm II (PESA-II), and the Strength Pareto Evolutionary Algorithm II (SPEA-II) along with the Combined objective function and Genetic Algorithm (CGA) are tested to calibrate the model in (i). A number of quality measures are applied to assess cardinality, accuracy, and diversity of solutions, which include the Number of Pareto Solutions (NPS), Generation Distance (GD), Spacing (SP), and Maximum Spread (MS). Our results indicate that according to MS and SP, NSGA-II performs better than other techniques for calibrating GR4J using GRACE dTWS and in situ runoff data. Considering GD as a measure of efficiency, MPSO is found to be the best technique. CGA is found to be an efficient method, while considering the statistics of the GR4J’s 4 calibrated parameters to rank the optimization techniques. The Nash-Sutcliffe model efficiency coefficient is also used to assess the predictive power of the calibrated hydrological models, for which our results indicate satisfactory performance of the assessed calibration experiments. 相似文献
6.
主要论述用计算机代替手工实现综合解译的过程。该过程归纳为：从专业领域获取知识组织成专业模型，再将其转变翻译成知识模型，然后转移到计算机内实现推理目标。重点论述从专业模型到知识模型的过渡和推理目标的实现。通过在河北、山西的实践，证明用计算机综合解释圈定找矿靶区是可行的 相似文献
7.
以4 000 m以浅的主要热储层为研究对象,通过总结天津地热资源特征及勘查现状,利用热储法结合水均衡法和数值耦合优化管理模型计算天津市主要热储层30 a热流体可采资源量及可采热量。结果表明: 到2045年底,热储法结合水均衡法计算的热流体可采资源量和可采热量分别为27.012×1018 m3和47.0×1016 J; 数值耦合优化管理模型计算的热流体可采资源量和可采热量分别为26.6×1018 m3和49.74×1016 J; 2种方法计算结果基本一致。该计算结果可为天津市地热资源合理开发及科学管理提供依据。 相似文献
8.
9.
基于人工交叉裂隙模型,通过室内透水试验,利用电荷耦合元件（CCD）照相机可视化技术,对流体在裂隙交叉点内的非线性流动特性进行研究。建立两种离散裂隙网络（DFN）模型,考虑两种边界条件,改变模型进口和出口之间的压力,直接求解Navier-Stokes（简称N-S）方程,对DFN的非线性渗流特性进行研究。结果表明,室内试验可以观测到与出口3相连的裂隙单元内发生了明显的非线性流动,且通过模型的流量Q和模型两端的压力P具有非线性关系。数值计算结果也表明,在水力梯度J较大时（比如J > 0.1）,通过DFN的Q和P具有非线性关系,而当J较小时（比如J < 10-4）,Q与P线性相关;根据文中的算例,建议利用局部立方定律求解DFN内每条裂隙的渗流特性的临界条件为J ≤10-4;裂隙表面粗糙会造成通过DFN渗流量的降低,但对相对流量误差的影响可忽略不计。 相似文献
10.
Jun-Qi Liu Xiao-Ping Mao Chong-Long Wu Zhang-Qian 《Journal of the Geological Society of India》2013,82(5):570-574
True 3D solid modeling of complex geologic bodies still face many difficulties. In this paper, a new technique of true 3D solid modeling is addressed, which incorporates the application of 2D&3D interactive aided section technology to revise scatter point aggregates, the means of two-body 3D data structure (improved B-rep 3D solid data structure) to organize data and the usage of vector shear technology for modeling. Based on such techniques, a true 3D solid model of a large hydropower engineering project in southern China was built to serve as intuitive platform for engineering survey, design, and construction. In the light of its wide application to many projects, it can be considered as a reasonable and effective method for 3D modeling of complex geologic bodies. 相似文献
11.
Book reviewed in this article:
Seppälä, M. 2004: Wind as a Geomorphic Agent in Cold Climates
van der Meer, J. J. M. (ed.) 2004: Spitsbergen Push Moraines. Developments in Quaternary Science 4 相似文献
Seppälä, M. 2004: Wind as a Geomorphic Agent in Cold Climates
van der Meer, J. J. M. (ed.) 2004: Spitsbergen Push Moraines. Developments in Quaternary Science 4 相似文献
12.
13.
The applanation of mountain belts that results in peneplain is generally considered to be caused by the long-term activity of erosion. Peneplanation has been previously defined as the lowering of an elevated topography and the concomitant subduing of its relief. We propose a model following which piedmont sedimentation induces the base level rise, allowing applanation to develop at high elevation and resulting in an elevated ‘peneplain’. This model is illustrated by the morphological evolution of the southern flank of the Pyrenees during the Cainozoic. To cite this article: J. Babault, J. Van Den Driessche, C. R. Geoscience 337 (2005). 相似文献
14.
洪佺 《中国地质灾害与防治学报》2006,17(1):86-90
文中介绍了一个基于C/S模式的工程勘察图件信息管理系统的功能结构、设计思想及实现技术。该系统以单位局域网为依托,按客户机/服务器(C/S)模式实现图件的数据库组织与管理。其中服务器端在实现对图件信息进行数据库管理的同时,通过建立远程数据组织,并选择合适的数据集和与之对应的数据库连接组件,为客户端提供服务。客户端使用DCOM通信协议与服务器进行通信,并通过客户端的数据集提供者组件实现客户端与数据服务器的连接与访问。系统的实现为所在单位大量的岩土工程勘察图件提供了一个安全、可靠、使用方便的管理模式。并将单位的图件管理由分散的计算机管理变成有组织的集中管理,从而提高了图件的利用率和应用价值。 相似文献
15.
Hauke Marquardt Steffen Ganschow Frank R. Schilling 《Physics and Chemistry of Minerals》2009,36(2):107-118
Knowledge of heat transport properties as a function of mineral- and rock-composition and temperature is of major relevance
to understand and model heat transfer in the Earth’s interior. A systematic study on 13 natural and 4 synthetic garnets was
carried out in an attempt to obtain a better systematic understanding of the processes that affect the heat transport in minerals,
especially the effect of chemical substitution in solid solution series. It is found that substitution significantly lowers
the thermal diffusivity from end-member values for both synthetic and natural garnets with a minimum of thermal diffusivity
at an intermediate composition. The thermal diffusivity as a function of the degree of substitution can be described by the
approach of Padture and Klemens (J Am Ceram Soc 80 (4):1018–1020, 1997). With increasing temperature the thermal diffusivity decreases due to phonon-phonon-scattering effects. A quantitative analysis
of the high-temperature behaviour was carried out by using the model of Roufosse and Klemens (J Geophys Res 79 (5):703–705,
1974), which takes a lower limit of thermal diffusivity at elevated temperatures into account. The model allows for an extrapolation
of the deduced room temperature thermal diffusivities to higher temperatures. Furthermore, the model was modified to determine
the high temperature limit of the thermal diffusivity for all investigated natural garnets D
min to be 0.64 ± 0.03 mm2/s. 相似文献
16.
We used titration calorimetry to measure the bulk heats of proton and Cd adsorption onto a common Gram positive soil bacterium Bacillus subtilis at 25.0 °C. Using the 4-site non-electrostatic model of Fein et al. [Fein, J.B., Boily, J.-F., Yee, N., Gorman-Lewis, D., Turner, B.F., 2005. Potentiometric titrations of Bacillus subtilis cells to low pH and a comparison of modeling approaches. Geochim. Cosmochim. Acta69 (5), 1123-1132.] to describe the bacterial surface reactivity to protons, our bulk enthalpy measurements can be used to determine the following site-specific enthalpies of proton adsorption for Sites 1-4, respectively: −3.5 ± 0.2, −4.2 ± 0.2, −15.4 ± 0.9, and −35 ± 2 kJ/mol, and these values yield the following third law entropies of proton adsorption onto Sites 1-4, respectively: +51 ± 4, +78 ± 4, +79 ± 5, and +60 ± 20 J/mol K. An alternative data analysis using a 2-site Langmuir-Freundlich model to describe proton binding to the bacterial surface (Fein et al., 2005) resulted in the following site-specific enthalpies of proton adsorption for Sites 1 and 2, respectively: −3.6 ± 0.2 and −35.1 ± 0.3 kJ/mol. The thermodynamic values for Sites 1-3 for the non-electrostatic model and Site 1 of the Langmuir-Freundlich model of proton adsorption onto the bacterial surface are similar to those associated with multifunctional organic acid anions, such as citrate, suggesting that the protonation state of a bacterial surface site can influence the energetics of protonation of neighboring sites. Our bulk Cd enthalpy data, interpreted using the 2-site non-electrostatic Cd adsorption model of Borrok et al. [Borrok, D., Fein, J.B., Tischler, M., O’Loughlin, E., Meyer, H., Liss, M., Kemner, K.M., 2004b. The effect of acidic solutions and growth conditions on the adsorptive properties of bacterial surfaces. Chem. Geol.209 (1-2), 107-119.] to account for Cd adsorption onto B. subtilis, yield the following site-specific enthalpies of Cd adsorption onto bacterial surface Sites 2 and 3, respectively: −0.2 ± 0.4 and +14.4 ± 0.9 kJ/mol, and the following third law entropies of Cd adsorption onto Sites 2 and 3, respectively: +57 ± 4 and +128 ± 5 J/mol K. The calculated enthalpies of Cd adsorption are typical of those associated with Cd complexation with anionic oxygen ligands, and the entropies are indicative of inner sphere complexation by multiple ligands. The experimental approach described in this study not only yields constraints on the molecular-scale mechanisms involved in proton and Cd adsorption reactions, but also provides new thermodynamic data that enable quantitative estimates of the temperature dependence of proton and Cd adsorption reactions. 相似文献
17.
基于Plesha本构的岩石节理多层结构模型研究 总被引：1，自引：1，他引：0
在Dong等工作的基础上[1],研究了基于Plesha本构的岩石节理多层结构模型。模型将节理面分解为不同层次细观结构面,每层结构面代表一级粗糙度,力学响应发生在最底层（基本面）,上层结构面受力性状由其下层结构面平均化得到,依次进行得到节理宏观力学性状。节理破坏由下而上分层次进行,基本面破坏后,其上层结构面转化为基本面,基本面采用Plesha节理模型。模型能模拟弹性变形、滑动变形、磨损、剪断、压碎、分离等作用机理。定义的接触因子与绕流因子能考虑节理接触面积及粗糙度变化对渗流的影响。通过将粗糙度定义为等效起伏角,可以模拟节理循环剪切性状。采用ABAQUS的用户子程序UEL进行了模型验证与参数分析。 相似文献
18.
M. Hamami 《Geotechnical and Geological Engineering》2006,24(5):1271-1292
The work presented in this paper comes as part of a research program dealing with the thermomechanical behaviour of rock salt.
It aims to study laboratory and in-situ long-term behaviour by means of creep tests with deviator and temperature changes. The laboratory results, using a triaxial
multi-stages creep tests, highlighted the strain hardening character of rock salt. Furthermore, the in-situ results, using a borehole dilatometer multi-step creep test, have shown that the drilling is carried out in a weakly stressed
pillar. The interpretation of the laboratory results, using the J.LEMAITRE law, did not indicate full agreement with all the
test results. As a result a ‘double’ J.LEMAITRE model, which takes into account a double strain hardening variable, has been
put forward. The validation of this model on the laboratory creep tests is very satisfactory. Furthermore, the activation
energy seems satisfactory to represent the influence of the temperature. The in-situ behaviour modelling is clearly more complex than the modelization based on laboratory tests. In fact, it seems that if the
rock salt behaviour is maintained by J.LEMAITRE law, it is necessary to vary with the stress, at least, one of the parameters
assumed constant in the basic law. 相似文献
19.
A computerised algorithm is used to arrange fluid-absent reactions about invariant points in P—T space for an end-member model of blueschist facies metamorphism at Port Macquarie, N.S.W., consisting of the nine phases quartz, albite, jadeite, lawsonite, zoisite, paragonite, glaucophane, pyrope and chlorite. Inspection of the print-out (a table of reaction take-off angles for each invariant point) indicates that this multisystem consists of two mutually exclusive sets of invariant points; lawsonite-absent, paragonite-absent and glaucophane-absent versus the other six. The algorithm is completely general for any two intensive variables and can treat solid solution minerals or degeneracy in reactions/invariant points.Terms ABS(X)
Absolute value of X
- A(J)
Slope of reaction J in degrees
-
V(J)
Denominator variable in the slope fraction for reaction J
- R(K, J)
Reaction coefficient of phase K in reaction J
- S(K, J)
Stability pointer for phase K in reaction J, in degrees
- SGN (X)
Library function: =–1 when X<0; =+1 when X0
- B(Q)
Correct take-off angle for the Q-absent reaction in degrees 相似文献
20.
计算河流动力学重在研究河流动力的时空变化,实质上是计算流体力学、计算土力学在河流动力学中的应用,但并非简单组合,主要难点源自相间作用机理复杂性及研究对象多尺度性所导致的应用可行性问题。问题解决的过程中产生大量新的适于河流动力计算的数学模型和数值模型,但当前理论体系还缺乏系统性。综合河流动力学、计算流体力学、计算土力学理论,给出计算河流动力学的理论体系框架,明确计算河流动力学各部分内容的基本联系。基于此理论体系,可以方便地判断模型准确性、计算量和复杂性,构建最优的数学模型,并判断数学模型的发展方向。 相似文献