首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Abstract The sensitivity of backstripping calculations (sedimentation rates and tectonic subsidence) to uncertainties regarding porosity reduction is examined. Models simulating compaction and externally sourced cementation are considered to provide first-order bounds on the thickness and mass changes for individual sedimentary units. These bounds can be used to estimate uncertainties in sedimentation rate and subsidence estimates. With these models, the timing of cement development can be regarded as unimportant for backstripping calculations. Calculations have been made to evaluate the effect on backstripping calculations of uncertainties in sediment porosity, density and the mechanisms of porosity reduction. Departures from theoretically predicted subsidence curves of the order of 100 m or so have been variously interpreted as the result of fluctuations or uncertainties in sea-level, palaeobathymetry, tectonic stress, sedimentation rates and stratigraphic age. Two examples are given to illustrate that such departures may occur in some subsidence curves merely as a result of imprecise assumptions regarding porosity reduction. Consideration should be given to the uncertainties in models for porosity reduction when using subsidence curves to infer second order tectonic influence during basin evolution.  相似文献   

2.
Mantle-induced dynamic topography (i.e., subsidence and uplift) has been increasingly recognized as an important process in foreland basin development. However, characterizing and distinguishing the effects (i.e., location, extent and magnitude) of dynamic topography in ancient foreland basins remains challenging because the spatio-temporal footprint of dynamic topography and flexural topography (i.e., generated by topographic loading) can overlap. This study employs 3D flexural backstripping of Upper Cretaceous strata in the central part of the North American Cordilleran foreland basin (CFB) to better quantify the effects of dynamic topography. The extensive stratigraphic database and good age control of the CFB permit the regional application of 3D flexural backstripping in this basin for the first time. Dynamic topography started to influence the development of the CFB during the late Turonian to middle Campanian (90.2–80.2 Ma) and became the dominant subsidence mechanism during the middle to late Campanian (80.2–74.6 Ma). The area influenced by >100 m dynamic subsidence is approximately 400 by 500 km, within which significant (>200 m) dynamic subsidence occurs in an irregular-shaped (i.e., lunate) subregion. The maximum magnitude of dynamic subsidence is 300 ± 100 m based on the 80.2–74.6 Ma tectonic subsidence maps. With the maximum magnitude of dynamic uplift being constrained to be 200–300 m, the gross amount of dynamic topography in the Late Cretaceous CFB is 500–600 m. Although the location of dynamic subsidence revealed by tectonic subsidence maps is generally consistent with isopach map trends, tectonic subsidence maps developed through 3D flexural backstripping provide more accurate constraints of the areal extent, magnitude and rate of dynamic topography (as well as flexural topography) in the CFB through the Late Cretaceous. This improved understanding of dynamic topography in the CFB is critical for refining current geodynamic models of foreland basins and understanding the surface expression of mantle processes.  相似文献   

3.
Tectonic inversion models predict that stratigraphic thickening and local facies patterns adjacent to reactivated fault systems should record at least two phases of basin development: (1) initial extension‐related subsidence and (2) subsequent shortening‐induced uplift. In the central Peloncillo Mountains of southwestern New Mexico, thickness trends, distribution, and provenance of two major stratigraphic intervals on opposite sides of a northwest‐striking reverse fault preserve a record of Early Cretaceous normal displacement and latest Cretaceous–Paleogene reverse displacement along the fault. The Aptian–Albian Bisbee Group thickens by a factor of three from the footwall to the hanging‐wall block, and the Late Cretaceous?–Eocene Bobcat Hill Formation is preserved only in the footwall block. An initial episode of normal faulting resulted in thickening of upper Aptian–middle Albian, mixed siliciclastic and carbonate deposits and an up section change from coarse‐grained deltas to shallow‐marine depositional conditions. A second episode of normal faulting caused abrupt thickening of upper Albian, quartzose coastal‐plain deposits across the fault. These faulting episodes record two events of extension that affected the northern rift shoulder of the Bisbee basin. The third faulting episode was oblique‐slip, reverse reactivation of the fault and other related, former normal faults. Alluvial and pyroclastic deposits of the Bobcat Hill Formation record inversion of the Bisbee basin and development of an intermontane basin directly adjacent to the former rift basin. Inversion was coeval with latest Cretaceous–Paleogene shortening and magmatism. This offset history offers significant insight into extensional basin tectonics in the Early Cretaceous and permits rejection of models of long‐term Mesozoic shortening and orogen migration during the Cretaceous. This paper also illustrates how episodes of fault reactivation modify, in very short distances (<10 km), regional patterns of subsidence, the distribution of sediment‐source areas, and sedimentary depositional systems.  相似文献   

4.
Structural evolution of African basins: stratigraphic synthesis   总被引：1，自引：0，他引：1  
The structural and stratigraphic character of African interior sedimentary basins is highly variable, indicating contrasting basin-forming mechanisms and subsequent subsidence histories. A stratigraphic database has been compiled for African interior depositional basins for the purpose of better understanding basin thermal and structural development. Data are recorded in the form of stratal age, lithology, thickness and elevation of top with respect to present sea level. The data are obtained from published structure contour maps, well sections, and outcrop geology and elevation. There are various degrees of data coverage of the basins, proportional to the amount of water and oil drilling activity. Consequently, there is excellent coverage of North African basins such as the Algerian basin and the Sirte basin, while there is little known about the subsurface of the Congo basin. The stratigraphic data are used to reconstruct the depositional history of the basins, while backstripping leads to the quantification of the thermo-tectonic component of basin subsidence. The nature of basement subsidence can provide constraints on lithospheric flexural rigidity. In addition, the depositional and thermo-tectonic history of each basin bears upon the mechanisms of basin formation and subsidence. Virtually all types of basins are represented in interior Africa, including thrust-loaded basins (Algerian), passive-margin rift basins (Algerian, Sirte), modern active rift basins (East African), ancient rift basins (Benue, Abu Gabra), basins caused by uplift of their margins (Congo, Chad, Illumeden) and even basins that may be related to thermal subsidence of hot-spot domes (Algerian, Sirte).  相似文献   

5.
The quantitative study of subsidence in the Granada basin, using decompaction and backstripping techniques, and contemporaneous relief development in the surrounding areas, especially in the Sierra Nevada, provides a good case example of the development of an intramontane basin. In the Granada basin, according to the interpretation of the seismic profiles and results of the backstripping analysis, subsidence and sedimentation rates were at a maximum in the late Tortonian and decreased progressively; meanwhile, the neighbouring areas were uplifted forming important relief. Chronostratigraphical revisions of the marine sediments show that the marine incursion that deposited sediments in the Granada basin lasted only 1.3 Ma, between 8.5 and 7.2 Ma. The gradual retreat of the sea in the Granada basin is not attributable to global eustatic fluctuations, but rather to uplift in the Sierra Nevada and its adjacent areas. From latest Tortonian to early Messinian times, the region became continental and the Granada basin acquired its present physiography and was differentiated as such. From the late Tortonian onwards, NNW–SSE compression combined with ENE–WSW extension affected the cordillera. In the Granada basin, extension controlled fault movements. There are two well-defined fault sets: the first trends 70°N–90°E, with low angle faults (less than 30°) dipping towards the north and south, defining the subsiding areas which have approximately E–W direction; whereas the second set has a NW–SE direction, and cuts and displaces the previous ones, defining the main subsiding areas in the eastern part of the basin. The reinterpretation of seismic profiles reveals that the subsiding axes within the Granada basin persisted from the Tortonian to the present because of continued displacements of the main faults.  相似文献   

6.
The Pipanaco Basin, in the southern margin of the Andean Puna plateau at ca. 28°SL, is one of the largest and highest intermontane basins within the northernmost Argentine broken foreland. With a surface elevation >1000 m above sea level, this basin represents a strategic location to understand the subsidence and subsequent uplift history of high‐elevation depositional surfaces within the distal Andean foreland. However, the stratigraphic record of the Pipanaco Basin is almost entirely within the subsurface, and no geophysical surveys have been conducted in the region. A high‐resolution gravity study has been designed to understand the subsurface basin geometry. This study, together with stratigraphic correlations and flexural and backstripping analysis, suggests that the region was dominated by a regional subsidence episode of ca. 2 km during the Miocene‐Pliocene, followed by basement thrusting and ca. 1–1.5 km of sediment filling within restricted intermontane basin between the Pliocene‐Pleistocene. Based on the present‐day position of the basement top as well as the Neogene‐Present sediment thicknesses across the Sierras Pampeanas, which show slight variations along strike, sediment aggradation is not the most suitable process to account for the increase in the topographic level of the high‐elevation, close‐drainage basins of Argentina. The close correlation between the depth to basement and the mean surface elevations recorded in different swaths indicates that deep‐seated geodynamic process affected the northern Sierras Pampeanas. Seismic tomography, as well as a preliminary comparison between the isostatic and seismic Moho, suggests a buoyant lithosphere beneath the northern Sierras Pampeanas, which might have driven the long‐wavelength rise of this part of the broken foreland after the major phase of deposition in these Andean basins.  相似文献   

7.
Basement heat flow is one of the key unknowns in sedimentary basin analysis. Its quantification is challenging not in the least due to the various feedback mechanisms between the basin and lithosphere processes. This study explores two main feedbacks, sediment blanketing and thinning of sediments during lithospheric stretching, in a series of synthetic models and a reconstruction case study from the Norwegian Sea. Three types of basin models are used: (1) a newly developed one‐dimensional (1D) forward model, (2) a decompaction/backstripping approach and (3) the commercial basin modelling software TECMOD2D for automated forward basin reconstructions. The blanketing effect of sedimentation is reviewed and systematically studied in a suite of 1D model runs. We find that even for moderate sedimentation rates (0.5 mm year?1), basement heat flow is depressed by ～25% with respect to the case without sedimentation; for high sedimentation rates (1.5 mm year?1), basement heat flow is depressed by ～50%. We have further compared different methods for computing sedimentation rates from the presently observed stratigraphy. Here, we find that decompaction/backstripping‐based methods may systematically underestimate sedimentation rates and total subsidence. The reason for this is that sediments are thinned during lithosphere extension in forward basin models while there are not in backstripping/decompaction approaches. The importance of sediment blanketing and differences in modelling approaches is illustrated in a reconstruction case study from the Norwegian Sea. The thermal and structural evolution of a transect across the Vøring Basin has been reconstructed using the backstripping/decompaction approach and TECMOD2D. Computed total subsidence curves differ by up to ～3 km and differences in computed basement heat flows reach up to 50%. These findings show that strong feedbacks exist between basin and lithosphere processes and that resolving them require integrated lithosphere‐scale basin models.  相似文献   

8.
Subsidence analyses from the Betic Cordillera, southeast Spain   总被引：1，自引：0，他引：1  
Fifty‐four Mesozoic–Cenozoic stratigraphic sections from the Betic Cordillera of southeast Spain have been analysed in order to estimate the timing and amount of lithospheric stretching that occurred at the western end of the Tethyan Ocean since the Hercynian Orogeny. The standard backstripping technique has been used in order to calculate the water‐loaded subsidence of basement for each section. Water‐loaded subsidence curves were then inverted in order to determine the variation of lithospheric strain rate as a function of time, which yields estimates of timing, magnitude and intensity of stretching. Rifting commenced during the Late Permian/Early Triassic times and continued intermittently throughout the Mesozoic in response to the opening of the Tethyan Ocean to the east and the opening of the Atlantic Ocean to the west. Two major events in the Permo‐Triassic/Early Jurassic and the Late Jurassic/Early Cretaceous can be clearly identified. Stretching factors are generally small (1.1–1.25) probably because the Betic Cordillera was located at the westernmost end of the Tethys. Peak strain rates of ～10?15 s?1 were obtained for Mesozoic rift events and these values are in broad agreement with those obtained throughout the Tethyan Realm. We have also analysed the Neogene extensional event, which played an important role in forming the existing Mediterranean Sea. A combination of well‐log information and calibrated seismic reflection data was modelled. Peak strain rates in these younger basins are almost one order of magnitude faster than those estimated for the Mesozoic basins. These higher values appear to be typical of back‐arc extensional basins elsewhere. To the west and north of the Betic Cordillera, the Guadalquivir foreland basin developed as extension took place further east. Backstripped sections from this basin clearly record the northward migration of foreland basin subsidence through time.  相似文献   

9.
Seven tectonic subsidence curves, based on outcrop data, have been calculated in order to constrain the geodynamic evolution of the Permian–Mesozoic sedimentary succession (up to 10 km thick) of the Central Southern Alps basin (Italy). The analysis of the tectonic subsidence curves, covering a time span of about 200 Ma, allowed us to quantify the subsidence rates, to document the activity of syndepositional fault systems and calculate their slip rates. Different stages, in terms of duration and magnitude of subsidence‐uplift trends, have been identified in the evolution of the basin. The fault activity, reconstructed by comparing subsidence curves from adjacent sectors, resulted as highly variable both temporally and spatially. Strike‐slip tectonics was coeval to Permian sedimentation, as suggested by the strong differences in the subsidence rates in the sections. The evolution and subsidence rates suggest a continental shelf deposition from Early Triassic to Carnian, when subsidence came to a stop. A rapid resumption of subsidence is observed from the Norian, with a subsidence pulse in the Late Norian, followed by the regional uplift, in the Late Rhaetian. The following Early Jurassic subsidence is characterized by tectonic subsidence similar to that of the Norian. The Norian and Early Jurassic pulses were characterized by the highest slip rates along growth faults and are identified as two distinct tectonic events. The Norian–Rhaetian event is tentatively related to transtensional tectonics whereas the Early Jurassic event is related to crustal extension. The Early Jurassic subsidence records a shift in space an time of the beginning of the extensional stage, from Late Hettangian to the east to Late Pliensbachian–Toarcian to the west. From the Toarcian to the Aptian, the curves are compatible with regional thermal subsidence, later followed (Albian–Cenomanian) by uplift pulses in a retrobelt foreland basin (from Cenomanian onward).  相似文献   

10.
The spatial organisation of meandering-river deposits varies greatly within the sedimentary fills of rift basins, depending on how differential rates of fault propagation and subsidence interplay with autogenic processes to drive changes in fluvial channel-belt position and rate of migration, avulsion frequency and mechanisms of meander-bend cut off. This set of processes fundamentally influences stacking patterns of the accumulated successions. Quantitative predictions of the spatio-temporal evolution and internal architecture of meandering fluvial deposits in such tectonically active settings remain limited. A numerical forward stratigraphic model—the Point-Bar Sedimentary Architecture Numerical Deduction (PB-SAND)—is applied to examine relationships between differential rates of subsidence and resultant fluvial channel-belt migration, reach avulsion and channel-deposit stacking in active, fault-bounded half-grabens. The model is used to reconstruct and predict the complex morphodynamics of fluvial meanders, their generated channel belts, and the associated lithofacies distributions that accumulate as heterogeneous fluvial successions in rift settings, constrained by data from seismic images and outcrop successions. The 3D modelling outputs are used to explore sedimentary heterogeneity at various spatio-temporal scales. Results show how the connectivity of sand-prone geobodies can be quantified as a function of subsidence rate, which itself decreases both along and away from the basin-bounding fault. In particular, results highlight the spatial variability in the size and connectedness of sand-prone geobodies that is seen in directions perpendicular and parallel to the basin axis, and that arises as a function of the interaction between spatial and temporal variations in rates of accommodation generation and fault-influenced changes in river morphodynamics. The results have applied significance, for example, to both hydrocarbon exploration and assessment of groundwater aquifers. The expected greatest connectivity of fluvial sandbody in a half-graben is primarily determined by the complex interplay between the frequency and rate of subsidence, the style of basin propagation, the rates of migration of channel belts, the frequency of avulsion and the proportion and spatial distribution of variably sand-prone channel and bar deposits.  相似文献   

11.
Abstract Low‐angle detachment faults and thrust‐sheet top basins are common features in foreland basins. However, in stratigraphic analysis their influence on sequence architecture is commonly neglected. Usually, only eustatic sea level and changing flexural subsidence are accounted for, and when deformation is considered, the emphasis is on the generation of local thrust‐flank unconformities. This study analyses the effects of detachment angle and repetitive detachment activation on stratigraphic stacking patterns in a large thrust‐sheet top basin by applying a three‐dimensional numerical model. Model experiments show that displacement over low‐angle faults (2–6°) at moderate rates (～5.0 m kyr?1) results in a vertical uplift component sufficient to counteract the background flexural subsidence rate. Consequently, the basin‐wide accommodation space is reduced, fluvio‐deltaic systems carried by the thrust‐sheet prograde and part of the sediment supply is spilled over towards adjacent basins. The intensity of the forced regression and the interconnectedness of fluvial sheet sandstones increases with the dip angle of the detachment fault or rate of displacement. In addition, the delta plain is susceptible to the formation of incised valleys during eustatic falls because these events are less compensated by regional flexural subsidence, than they would be in the absence of fault displacement.  相似文献   

12.
The aim of this paper is to quantify the evolution in time and space of the accommodation (space available for sedimentation) in the case of a growth fault structure resulting from gravity‐induced extension comprising a listric fault/raft system located along the West African margin. To achieve this, use was made of an original approach combining two complementary techniques (accommodation variation measurements and 3‐D restoration) in order to quantify vertical and horizontal displacement related to deformation, using a data set made up of a 3‐D seismic survey and well logs. We applied sequence stratigraphic principles to (i) define a detailed stratigraphic framework for the Albo‐Cenomanian and (ii) measure subsidence rates from accommodation variations. 3‐D restoration was used to (iii) reconstruct the evolution of the 3‐D geometry of the fault system. The rates of horizontal displacement of structural units were measured and linked to successive stages in the growth of the fault system. Subsidence of the structural units exhibits three scales of variation: (1) long‐term variation (10 Ma) of c. 80 m Ma?1 for a total subsidence of about 1400 m, compatible with the general subsidence of a passive margin, and (2) short‐term variations (1–5 Ma) corresponding to two periods of rapid subsidence (about 150–250 m Ma?1) alternating with periods of moderate subsidence rate (around 30 m Ma?1). These variations are linked to the development of the fault system during the Albian (with downbuilding of the raft and development of the initial basin located in between). During the Cenomanian, the development of the graben located between the lower raft and the initial basin did not seem to affect the vertical displacements. (3) High‐frequency variations (at the scale of genetic unit sets) range between ?50 and 250 m for periods of 0.2–2 Ma. Accommodation variations governed these cycles of progradation/retrogradation rather than sediment flux variations. In addition, the nine wells display a highly consistent pattern of variation in accommodation. This suggests that the genetic unit sets were controlled at a larger scale than the studied system (larger than 20 km in wavelength), for example, by eustatic variations. Translation rates are between 3 and 30 times higher than subsidence rates. Therefore, in terms of amplitude, the main parameter controlling the space available for sedimentation is the structural development of the fault system, that is to say, the seaward translation of the raft units, itself resulting from a regional gravity‐driven extension.  相似文献   

13.
Tectonic evolution of the Alboran Sea basin   总被引：6，自引：0，他引：6  
The Alboran Sea is an extensional basin of Neogene age that is surrounded by highly arcuate thrust belts. Multichannel seismic (MCS) reflection profile data suggest the basin has a complex tectonic fabric that includes extensional, compressional and strike-slip structures. The early Miocene history appears to be dominated by graben formation with border faults that are in large part contemporaneous with thrust movements in the external zones of the Betic and Rif mountains. Extension appears to have continued into the late Miocene although the main movements were probably completed by the time of the Messinian ‘salinity crisis’. The Pliocene and younger history of the basin is dominated by infilling of the Messinian topography, gentle subsidence, and extensional, compressional and strike-slip movements. There is evidence from the sea-floor morphology and seismicity patterns that the basin is actively deforming in response to present-day plate motions. Backstripping of well data in the basin margin suggests that the initial extensional event was accompanied by crustal and lithospheric thinning. The depth to Moho inferred from backstripping is greater than the depth expected based on seismic and gravity modelling, suggesting that backstripping underestimates the true amount of thinning. One explanation is that some of the thinning occurred while the crust was above sea level, perhaps as a result of either crustal thickening, or a period of lithospheric heating and thinning, prior to rifting. We found that a model with a ‘normal’ crustal thickness of 31.2 km, a lithospheric thickness of 50 km, and β= 1.4 predicts 0.8 km of initial uplift. These parameters fit the well subsidence data and bring the backstripped Moho into better agreement with the seismic and gravity Moho. The origin of such a thin lithosphere is not constrained by the data, but we believe that it may be a result of the detachment of a cold lithospheric ‘root’ that formed during pre-Neogene collisional orogeny in the region.  相似文献   

14.
ABSTRACT The intracratonic basins of central Australia are distinguished by their large negative Bouguer gravity anomalies, despite the absence of any significant topography. Over the Neoproterozoic to Palaeozoic Officer Basin, the anomalies attain a peak negative amplitude in excess of 150 mGal, amongst the largest of continental anomalies observed on Earth. Using well data from the Officer and Amadeus basins and a data grid of sedimentary thicknesses from the eastern Officer Basin, we have assessed the evolution of these intracratonic basins. One-dimensional backstripping analysis reveals that Officer and Amadeus basin tectonic subsidence was not entirely synchronous. This implies that the basins evolved as discrete geological features once the Centralian Superbasin was dismembered into its constituent basins. Two- and three-dimensional backstripping and gravity modelling suggest that the eastern Officer Basin evolved from a broad continental sag into a region of intracratonic flexural subsidence from the latest Neoproterozoic, when flexure of the lithosphere deepened the northern basin. The results from gravity modelling improve when the crust is thickened beneath the northern margin of the basin and thinned at the southern margin, as has been suggested by recent deep seismic data. The crustal thickening beneath the basin's northern margin abuts the region of greatest topographic relief and is consistent with the observed structure at the edges of many orogenic belts. If the Officer Basin evolved as a foreland-type basin from the late Proterozoic and has retained those features to the present, then one implication is that in the absence of any significant topography, cratonic lithosphere must be able to support stresses over very long periods of geological time.  相似文献   

15.
Geomorphic data combined with stratigraphic studies provide significant information to constrain timing and amount of fault movement. The lower Narmada valley lies astride the Narmada–Son Fault (NSF), an important ENE–WSW-trending tectonic element responsible for the current intraplate seismicity being experienced in the central part of the Indian plate. Varying nature and degree of tectonic movements along the NSF during Late Pleistocene and Holocene have produced four geomorphic surfaces in the lower Narmada valley: the alluvial plain (S1), ravine surface (S2), a gravelly fan surface (S3) and the valley fill terrace surface (S4). Two major phases of tectonic movements in a compressive stress regime are recorded along the NSF: slow synsedimentary subsidence of the basin during Late Pleistocene due to differential movement, followed by inversion of the basin during the Holocene marked by differential uplift along the NSF. The study suggests that the inversion of the basin is in response to the significant increase in the intensity of compressive stresses in the Indian plate mainly during the Early Holocene. The present incisive drainage and recent seismic activity indicate that the compressive stresses continue to accumulate along the NSF due to continued northward movement of the Indian plate.  相似文献   

16.
Rift basin tectono‐stratigraphic models indicate that normal fault growth controls the sedimentology and stratigraphic architecture of syn‐rift deposits. However, such models have rarely been tested by observations from natural examples and thus remain largely conceptual. In this study we integrate 3D seismic reflection, and biostratigraphically constrained core and wireline log data from the Vingleia Fault Complex, Halten Terrace, offshore Mid‐Norway to test rift basin tectono‐stratigraphic models. The geometry of the basin‐bounding fault and its hangingwall, and the syn‐rift stratal architecture, vary along strike. The fault is planar along a much of its length, bounding a half‐graben containing a faultward‐thickening syn‐rift wedge. Locally, however, the fault has a ramp‐flat‐ramp geometry, with the hangingwall defined by a fault‐parallel anticline‐syncline pair. Here, an unusual bipartite syn‐rift architecture is observed, comprising a lower faultward‐expanding and an upper faultward‐thinning wedge. Fine‐grained basinfloor deposits dominate the syn‐rift succession, although isolated coarse clastics occur. The spatial and temporal distribution of these coarse clastics is complex due to syn‐depositional movement on the Vingleia Fault Complex. High rates of accommodation generation in the fault hangingwall led to aggradational stacking of fan deltas that rapidly (<5 km) pinch out basinward into offshore mudstone. In the south of the basin, rapid strain localization meant that relay ramps were short‐lived and did not represent major, long‐lived sediment entry points. In contrast, in the north, strain localization occurred later in the rift event, thus progradational shorefaces developed and persisted for a relatively long time in relay ramps developed between unlinked fault segments. The footwall of the Vingleia Fault Complex was characterized by relatively low rates of accommodation generation, with relatively thin, progradational hangingwall shorelines developed downdip of the fault block apex, sometime after the onset of sediment supply to the hangingwall. We show that rift basin tectono‐stratigraphic models need modifying to take into account along‐strike variability in fault structure and basin physiography, and the timing and style of syn‐rift sediment dispersal and facies, in both hangingwall and footwall locations.  相似文献   

17.
Fluid storage systems, such as oil, gas, magma or water reservoirs, are often controlled by the host rock structure and faulted terrain. In sedimentary basins, where no direct information about underlying structure is available, the pattern of ground deformation may allow us to assess the buried fault arrangement. We provide an example in the semi-arid area of Iran, in the Kashmar Valley, a region subject to land subsidence due to water overexploitation. Geodetically determined subsidence rates in the Kashmar Valley exceed 15–30 cm yr−1. The pattern of surface deformation is strongly non-uniform and displays NE–SW elongated bowls of subsidence. The trend resembles old Cretaceous-to-Tertiary faults that evolved during early alpine tectonic deformation. Although these early alpine structures are considered tectonically inactive in the present day, the observed land subsidence pattern indicates significant structural control on the geometry of the aquifer basin and its deformation during reservoir drainage.  相似文献   

18.
High resolution seismic reflection surveys over one of the most active and rapidly extending regions in the world, the Gulf of Corinth, have revealed that the gulf is a complex asymmetric graben whose geometry varies significantly along its length. A detailed map of the offshore faults in the gulf shows that a major fault system of nine distinct faults limits the basin to the south. The northern Gulf appears to be undergoing regional subsidence and is affected by an antithetic major fault system consisting of eight faults. All these major faults have been active during the Quaternary. Uplifted coastlines along their footwalls, growth fault patterns and thickening of sediment strata toward the fault planes indicate that some of these offshore faults on both sides of the graben are active up to present. Our data ground‐truth recent models and provides actual observations of the distribution of variable deformation rates in the Gulf of Corinth. Furthermore they suggest that the offshore faults should be taken into consideration in explaining the high extension rates and the uplift scenarios of the northern Peloponnesos coast. The observed coastal uplift appears to be the result of the cumulative effect of deformation accommodated by more than one fault and therefore, average uplift rates deduced from raised fossil shorelines, should be treated with caution when used to infer individual fault slip rates. Seismic reflection profiling is a vital tool in assessing seismic hazard and basin‐formation in areas of active extension.  相似文献   

19.
The thickness and distribution of early syn‐rift deposits record the evolution of structures accommodating the earliest phases of continental extension. However, our understanding of the detailed tectono‐sedimentary evolution of these deposits is poor, because in the subsurface, they are often deeply buried and below seismic resolution and sparsely sampled by borehole data. Furthermore, early syn‐rift deposits are typically poorly exposed in the field, being buried beneath thick, late syn‐rift and post‐rift deposits. To improve our understanding of the tectono‐sedimentary development of early syn‐rift strata during the initial stages of rifting, we examined quasi‐3D exposures in the Abura Graben, Suez Rift, Egypt. During the earliest stage of extension, forced folding above blind normal fault segments, rather than half‐graben formation adjacent to surface‐breaking faults, controlled rift physiography, accommodation development and the stratigraphic architecture of non‐marine, early syn‐rift deposits. Fluvial systems incised into underlying pre‐rift deposits and were structurally focused in the axis of the embryonic depocentre, which, at this time, was characterized by a fold‐bound syncline rather than a fault‐bound half graben. During this earliest phase of extension, sediment was sourced from the rift shoulder some 3 km to the NE of the depocentre, rather than from the crests of the flanking, intra‐basin extensional forced folds. Fault‐driven subsidence, perhaps augmented by a eustatic sea‐level rise, resulted in basin deepening and the deposition of a series of fluvial‐dominated mouth bars, which, like the preceding fluvial systems, were structurally pinned within the axis of the growing depocentre, which was still bound by extensional forced folds rather than faults. The extensional forced folds were eventually locally breached by surface‐breaking faults, resulting in the establishment of a half graben, basin deepening and the deposition of shallow marine sandstone and fan‐delta conglomerates. Because growth folding and faulting were coeval along‐strike, syn‐rift stratal units deposited at this time show a highly variable along‐strike stratigraphic architecture, locally thinning towards the growth fold but, only a few kilometres along‐strike, thickening towards the surface‐breaking fault. Despite displaying the classic early syn‐rift stratigraphic motif recording net upward‐deepening, extensional forced folding rather than surface faulting played a key role in controlling basin physiography, accommodation development, and syn‐rift stratal architecture and facies development during the early stages of extension. This structural and stratigraphic observations required to make this interpretation are relatively subtle and may go unrecognized in low‐resolution subsurface data sets.  相似文献   

20.
ABSTRACT From study of Palaeozoic formations in the Appalachian foreland basin, a predictive stratigraphic model is proposed based on facies tract development during convergent-margin structural evolution. Five major facies tracts are recognized: shallow-water carbonates that formed during interorogenic quiescence and initial foreland subsidence; deep-water siliciclastics that accumulated in the proximal foreland basin during early collision; syn-collisional shallow-water siliciclastics; syn-collisional, channellized fluvial sandstones that aggraded in the proximal foreland; and progradational shoreline sandstones that were deposited in response to filling of the proximal foreland. Two other facies tracts that occur are organic-rich siliciclastics ('black shales'), which accumulated in oxygen-deficient areas of low clastic-sediment influx, and incised valley-fill deposits, which formed where subsidence rate was low.
Because the origin of each facies tract is dependent upon a unique combination of rate of accommodation change and rate of sediment supply, facies tract distribution is predictable from spatial and temporal patterns of subsidence and uplift associated with plate convergence. Alternating phases of thrust loading and quiescence caused fluctuations between underfilled and overfilled conditions during Palaeozoic evolution of the Appalachian basin. Along-strike variations in stratigraphic thickness, facies tract distribution, and development of unconformities in the Appalachian basin reflect the influence of structural irregularities along the collisional margin. In distal parts of the Appalachian foreland and in areas of structural recesses, eustatic influence on stratigraphic patterns is expressed more clearly than in areas of higher subsidence rate.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号