首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Sr- and Ca-rich waylandite, $ {\left( {{\hbox{B}}{{\hbox{i}}_{0.{54}}}{\hbox{S}}{{\hbox{r}}_{0.{31}}}{\hbox{C}}{{\hbox{a}}_{0.{25}}}{{\hbox{K}}_{0.0{1}}}{\hbox{B}}{{\hbox{a}}_{0.0{1}}}} \right)_{\Sigma 1.12}}{{\hbox{H}}_{0.{18}}}{\left( {{\hbox{A}}{{\hbox{l}}_{{2}.{96}}}{\hbox{C}}{{\hbox{u}}_{0.0{2}}}} \right)_{\Sigma 2.98}}{\left[ {{{\left( {{{\hbox{P}}_{0.{97}}}{{\hbox{S}}_{0.0{3}}}{\hbox{S}}{{\hbox{i}}_{0.0{1}}}} \right)}_{\Sigma 1.00}}{{\hbox{O}}_4}} \right]_2}{\left( {\hbox{OH}} \right)_6} $ , from Wheal Remfry, Cornwall, United Kingdom has been investigated by single-crystal X-ray diffraction and electron microprobe analyses. Waylandite crystallises in space group R $ \overline 3 $ ? m, with the cell parameters: a?=?7.0059(7) Å, c?=?16.3431(12) Å and V?=?694.69(11) Å3. The crystal structure has been refined to R 1?=?3.76%. Waylandite has an alunite-type structure comprised of a rhombohedral stacking of (001) composite layers of corner-shared AlO6 octahedra and PO4 tetrahedra, with (Bi,Sr,Ca) atoms occupying icosahedrally coordinated sites between the layers.  相似文献   

2.
Although orthopyroxene (Opx) is present during a wide range of magmatic differentiation processes in the terrestrial and lunar mantle, its effect on melt trace element contents is not well quantified. We present results of a combined experimental and computational study of trace element partitioning between Opx and anhydrous silicate melts. Experiments were performed in air at atmospheric pressure and temperatures ranging from 1,326 to 1,420°C in the system CaO–MgO–Al2O3–SiO2 and subsystem CaO–MgO–SiO2. We provide experimental partition coefficients for a wide range of trace elements (large ion lithophile: Li, Be, B, K, Rb, Sr, Cs, Ba, Th, U; rare earth elements, REE: La, Ce, Nd, Sm, Y, Yb, Lu; high field strength: Zr, Nb, Hf, Ta, Ti; transition metals: Sc, V, Cr, Co) for use in petrogenetic modelling. REE partition coefficients increase from $ D_{\text{La}}^{{\text{Opx}} {\hbox{-}} {\text{melt}}} \sim 0.0005 Although orthopyroxene (Opx) is present during a wide range of magmatic differentiation processes in the terrestrial and lunar mantle, its effect on melt trace element contents is not well quantified. We present results of a combined experimental and computational study of trace element partitioning between Opx and anhydrous silicate melts. Experiments were performed in air at atmospheric pressure and temperatures ranging from 1,326 to 1,420°C in the system CaO–MgO–Al2O3–SiO2 and subsystem CaO–MgO–SiO2. We provide experimental partition coefficients for a wide range of trace elements (large ion lithophile: Li, Be, B, K, Rb, Sr, Cs, Ba, Th, U; rare earth elements, REE: La, Ce, Nd, Sm, Y, Yb, Lu; high field strength: Zr, Nb, Hf, Ta, Ti; transition metals: Sc, V, Cr, Co) for use in petrogenetic modelling. REE partition coefficients increase from $ D_{\text{La}}^{{\text{Opx}} {\hbox{-}} {\text{melt}}} \sim 0.0005 $ D_{\text{La}}^{{\text{Opx}} {\hbox{-}} {\text{melt}}} \sim 0.0005 to $ D_{\text{Lu}}^{{{\text{Opx}} {\hbox{-}} {\text{melt}}}} \sim 0.109 $ D_{\text{Lu}}^{{{\text{Opx}} {\hbox{-}} {\text{melt}}}} \sim 0.109 , D values for highly charged elements vary from $ D_{\text{Th}}^{{{\text{Opx}} {\hbox{-}} {\text{melt}}}} \sim 0.0026 $ D_{\text{Th}}^{{{\text{Opx}} {\hbox{-}} {\text{melt}}}} \sim 0.0026 through $ D_{\text{Nb}}^{{{\text{Opx}} {\hbox{-}} {\text{melt}}}} \sim 0.0033 $ D_{\text{Nb}}^{{{\text{Opx}} {\hbox{-}} {\text{melt}}}} \sim 0.0033 and $ D_{\text{U}}^{{{\text{Opx}} {\hbox{-}} {\text{melt}}}} \sim 0.0066 $ D_{\text{U}}^{{{\text{Opx}} {\hbox{-}} {\text{melt}}}} \sim 0.0066 to $ D_{\text{Ti}}^{{\text{Opx}} {\hbox{-}} {\text{melt}}} \sim 0.058 $ D_{\text{Ti}}^{{\text{Opx}} {\hbox{-}} {\text{melt}}} \sim 0.058 , and are all virtually independent of temperature. Cr and Co are the only compatible trace elements at the studied conditions. To elucidate charge-balancing mechanisms for incorporation of REE into Opx and to assess the possible influence of Fe on Opx-melt partitioning, we compare our experimental results with computer simulations. In these simulations, we examine major and minor trace element incorporation into the end-members enstatite (Mg2Si2O6) and ferrosilite (Fe2Si2O6). Calculated solution energies show that R2+ cations are more soluble in Opx than R3+ cations of similar size, consistent with experimental partitioning data. In addition, simulations show charge balancing of R3+ cations by coupled substitution with Li+ on the M1 site that is energetically favoured over coupled substitution involving Al–Si exchange on the tetrahedrally coordinated site. We derived best-fit values for ideal ionic radii r 0, maximum partition coefficients D 0, and apparent Young’s moduli E for substitutions onto the Opx M1 and M2 sites. Experimental r 0 values for R3+ substitutions are 0.66–0.67 ? for M1 and 0.82–0.87 ? for M2. Simulations for enstatite result in r 0 = 0.71–0.73 ? for M1 and ~0.79–0.87 ? for M2. Ferrosilite r 0 values are systematically larger by ~0.05 ? for both M1 and M2. The latter is opposite to experimental literature data, which appear to show a slight decrease in $ r_{0}^{{{\text{M}}2}} $ r_{0}^{{{\text{M}}2}} in the presence of Fe. Additional systematic studies in Fe-bearing systems are required to resolve this inconsistency and to develop predictive Opx-melt partitioning models for use in terrestrial and lunar magmatic differentiation models.  相似文献   

3.
We present experiments showing that the lower oceanic crust should melt efficiently and quickly when heated by hot ascending magmas. Average plagioclase–olivine and plagioclase–augite pairs from the lower crust at the Southwest Indian Ridge have melt–mineral saturation boundaries at 1,190 and 1,154°C, respectively, and melt rapidly (>0.01 mm/h) at 50°C or more above these temperatures. Melting experiments performed on olivine–plagioclase and augite–plagioclase mineral pairs from actual oceanic lower crustal rock samples and under conditions applicable to a MOR setting (1,220–1,330°C, 1 atm, quartz–fayalite–magnetite oxygen buffer, 0.25–24 h) indicate that the resulting disequilibrium melts are linear mixes of the mineral compositions. The rates of melting are slower than the rate of heat-diffusion into a sample and are approximated as:
Our results indicate that great care must be taken in backward models using basalt chemistry alone to explore mantle-melting processes, assuming only crystallization and fractionation during ascent, as partial melts may mix with intruded hot magma.  相似文献   

4.
Gas chromatography, palynomorph constituents, and maturation are analyzed for oil samples of the Campanian Khasib and Tannuma Formations in the wells of East Baghdad oil field for biomarker studies, while palynomorph constituents and their maturation, Rock Eval pyrolysis, total organic carbon (TOC) analysis are carried on for the Upper Jurassic and the Cretaceous Formations of core samples from the same wells for dating and evaluation of the source rocks. The gas chromatography of these oils have shown biomarkers of abundant ranges of n-alkanes of less than C22(C17–C21) with C19 and C18 peaks to suggest mainly liquid oil constituents of paraffinic hydrocarbons from marine algal source of restricted palaeoenvironments in the reservoir as well as low nonaromatic $ {\hbox{C}}_{15}^{+} $ peaks to indicate their slight degradation and water washing. Oil biomarkers of $ \Pr ./{\hbox{Ph}}{.} = {0}{.85,}{{\hbox{C}}_{31}}/{{\hbox{C}}_{30}} < 1.0 $ , location is in the triangle of C27–C29 sterane, C28/C29 of 0.6 sterane, oleanane of 0.01, and CPI = 1.0, could indicate anoxic marine environment with carbonate deposition of Upper Jurassic–Early Cretaceous source. The recorded palynomorph constituents in this oil and associated water are four miospore, seven dinoflagellates, and one Tasmanite species that could confirm affinity to the Upper most Jurassic–Lower Cretaceous Chia Gara and Ratawi Formations. The recorded palynomorphs from the reservoir oil (Khasib and Tannuma Formations) are of light brown color of $ {\hbox{TAI}} = 2.8 - 3.0 $ and comparable to the mature palynomorphs that belong to Chia Gara and Lower part of Ratawi Formations. Chia Gara Formation had generated and expelled high quantity of oil hydrocarbons according their TOC weight percent of 0.5–8.5 with ${S_2} = 2.5 - 18.5\,{\hbox{mg}}\,{\hbox{Hc/g}}\;{\hbox{rock}} $ , high hydrogen index of the range 150–450 mg Hc/g Rock, good petroleum potential of 4.5–23.5 mg Hc/g rock, mature ( $ {\hbox{TAI}} = 2.8 - 3.0 $ and $ {\hbox{T}}\max = 428 - 443{\hbox{C}} $ ), kerogen type II, and palynofacies parameters of up to 100 amorphous organic matters with algae deposited in dysoxic–anoxic to suboxic–anoxic basin, while the palynomorphs of the rocks of Khasib Formation are of amber yellow color of TAI = 2.0 with low TOC and hence not generated hydrocarbons. But, this last formation could be considered as oil reservoir only according their high porosity (15–23%) and permeability (20–45 mD) carbonate rocks with structural anticline closure trending NW-SE. That oil have generated and expelled during two phases; the first is during Early Palaeogene that accumulated in traps of the Cretaceous structural deformation, while the second is during Late Neogene’s.  相似文献   

5.
We evaluate balanced metasomatic reactions and model coupled reactive and isotopic transport at a carbonatite-gneiss contact at Alnö, Sweden. We interpret structurally channelled fluid flow along the carbonatite-gneiss contact at ～640°C. This caused (1) metasomatism of the gneiss, by the reaction: ${\hbox{biotite} + \hbox{quartz} + \hbox{oligoclase} + \hbox{K}_{2} \hbox{O} +\,\hbox{Na}_{2}\hbox{O} \pm \hbox{CaO} \pm \hbox{MgO} \pm \hbox{FeO} = \hbox{albite} + \hbox{K-feldspar} + \hbox{arfvedsonite} + \hbox{aegirene-}\hbox{augite} + \hbox{H}_{2} \hbox{O} + \hbox{SiO}_{2}}We evaluate balanced metasomatic reactions and model coupled reactive and isotopic transport at a carbonatite-gneiss contact at Aln?, Sweden. We interpret structurally channelled fluid flow along the carbonatite-gneiss contact at ∼640°C. This caused (1) metasomatism of the gneiss, by the reaction: , (2) metasomatism of carbonatite by the reaction: calcite + SiO2 = wollastonite + CO2, and (3) isotopic homogenization of the metasomatised region. We suggest that reactive weakening caused the metasomatised region to widen and that the metasomatic reactions are chemically (and possibly mechanically) coupled. Spatial separation of reaction and isotope fronts in the carbonatite conforms to a chromatographic model which assumes local calcite–fluid equilibrium, yields a timescale of 102–104 years for fluid–rock interaction and confirms that chemical transport towards the carbonatite interior was mainly by diffusion. We conclude that most silicate phases present in the studied carbonatite were acquired by corrosion and assimilation of ijolite, as a reactive by-product of this process and by metasomatism. The carbonatite was thus a relatively pure calcite–H2O−CO2–salt melt or fluid.  相似文献   

6.
We have estimated soil moisture (SM) by using circular horizontal polarization backscattering coefficient (\(\sigma ^{\mathrm{o}}_{\mathrm{RH}}\)), differences of circular vertical and horizontal \(\sigma ^{\mathrm{o}} \, (\sigma ^{\mathrm{o}}_{\mathrm{RV}} {-} \sigma ^{\mathrm{o}}_{\mathrm{RH}})\) from FRS-1 data of Radar Imaging Satellite (RISAT-1) and surface roughness in terms of RMS height (\({\hbox {RMS}}_{\mathrm{height}}\)). We examined the performance of FRS-1 in retrieving SM under wheat crop at tillering stage. Results revealed that it is possible to develop a good semi-empirical model (SEM) to estimate SM of the upper soil layer using RISAT-1 SAR data rather than using existing empirical model based on only single parameter, i.e., \(\sigma ^{\mathrm{o}}\). Near surface SM measurements were related to \(\sigma ^{\mathrm{o}}_{\mathrm{RH}}\), \(\sigma ^{\mathrm{o}}_{\mathrm{RV}} {-} \sigma ^{\mathrm{o}}_{\mathrm{RH}}\) derived using 5.35 GHz (C-band) image of RISAT-1 and \({\hbox {RMS}}_{\mathrm{height}}\). The roughness component derived in terms of \({\hbox {RMS}}_{\mathrm{height}}\) showed a good positive correlation with \(\sigma ^{\mathrm{o}}_{\mathrm{RV}} {-} \sigma ^{\mathrm{o}}_{\mathrm{RH}} \, (R^{2} = 0.65)\). By considering all the major influencing factors (\(\sigma ^{\mathrm{o}}_{\mathrm{RH}}\), \(\sigma ^{\mathrm{o}}_{\mathrm{RV}} {-} \sigma ^{\mathrm{o}}_{\mathrm{RH}}\), and \({\hbox {RMS}}_{\mathrm{height}}\)), an SEM was developed where SM (volumetric) predicted values depend on \(\sigma ^{\mathrm{o}}_{\mathrm{RH}}\), \(\sigma ^{\mathrm{o}}_{\mathrm{RV}} {-} \sigma ^{\mathrm{o}}_{\mathrm{RH}}\), and \({\hbox {RMS}}_{\mathrm{height}}\). This SEM showed \(R^{2}\) of 0.87 and adjusted \(R^{2}\) of 0.85, multiple R=0.94 and with standard error of 0.05 at 95% confidence level. Validation of the SM derived from semi-empirical model with observed measurement (\({\hbox {SM}}_{\mathrm{Observed}}\)) showed root mean square error (RMSE) = 0.06, relative-RMSE (R-RMSE) = 0.18, mean absolute error (MAE) = 0.04, normalized RMSE (NRMSE) = 0.17, Nash–Sutcliffe efficiency (NSE) = 0.91 (\({\approx } 1\)), index of agreement (d) = 1, coefficient of determination \((R^{2}) = 0.87\), mean bias error (MBE) = 0.04, standard error of estimate (SEE) = 0.10, volume error (VE) = 0.15, variance of the distribution of differences \(({\hbox {S}}_{\mathrm{d}}^{2}) = 0.004\). The developed SEM showed better performance in estimating SM than Topp empirical model which is based only on \(\sigma ^{\mathrm{o}}\). By using the developed SEM, top soil SM can be estimated with low mean absolute percent error (MAPE) = 1.39 and can be used for operational applications.  相似文献   

7.
Three Al-Cr exchange isotherms at 1,250°, 1,050°, and 796° between Mg(Al, Cr)2O4 spinel and (Al, Cr)2O3 corundum crystalline solutions have been studied experimentally at 25 kbar pressure. Starting from gels of suitable bulk compositions, close approach to equilibrium has been demonstrated in each case by time studies. Using the equation of state for (Al, Cr)2O3 crystalline solution (Chatterjee et al. 1982a) and assuming that the Mg(Al, Cr)2O4 can be treated in terms of the asymmetric Margules relation, the exchange isotherms were solved for Δ G *, and . The best constrained data set from the 1,250° C isotherm clearly shows that the latter two quantities do not overlap within three standard deviations, justifying the choice of asymmetric Margules relation for describing the excess mixing properties of Mg(Al, Cr)2O4 spinels. Based on these experiments, the following polybaric-polythermal equation of state can be formulated: , P expressed in bars, T in K, G m ex and W G,i Sp in joules/mol. Temperature-dependence of G m ex is best constrained in the range 796–1,250° C; extrapolation beyond that range would have to be done with caution. Such extrapolation to lower temperature shows tentatively that at 1 bar pressure the critical temperature, T c, of the spinel solvus is 427° C, with dTc/dP≈1.3 K/kbar. The critical composition, X c, is 0.42 , and changes barely with pressure. Substantial error in calculated phase diagrams will result if the significant positive deviation from ideality is ignored for Al-Cr mixing in such spinels.  相似文献   

8.
Experiments at high pressure and temperature indicate that excess Ca may be dissolved in diopside. If the (Ca, Mg)2Si2O6 clinopyroxene solution extends to more Ca-rich compositions than CaMgSi2O6, macroscopic regular solution models cannot strictly be applied to this system. A nonconvergent site-disorder model, such as that proposed by Thompson (1969, 1970), may be more appropriate. We have modified Thompson's model to include asymmetric excess parameters and have used a linear least-squares technique to fit the available experimental data for Ca-Mg orthopyroxene-clinopyroxene equilibria and Fe-free pigeonite stability to this model. The model expressions for equilibrium conditions \(\mu _{{\text{Mg}}_{\text{2}} {\text{Si}}_{\text{2}} {\text{O}}_{\text{6}} }^{{\text{opx}}} = \mu _{{\text{Mg}}_{\text{2}} {\text{Si}}_{\text{2}} {\text{O}}_{\text{6}} }^{{\text{cpx}}} \) (reaction A) and \(\mu _{{\text{Ca}}_{\text{2}} {\text{Si}}_{\text{2}} {\text{O}}_{\text{6}} }^{{\text{opx}}} = \mu _{{\text{Ca}}_{\text{2}} {\text{Si}}_{\text{2}} {\text{O}}_{\text{6}} }^{{\text{cpx}}} \) (reaction B) are given by: 1 $$\begin{gathered} \Delta \mu _{\text{A}}^{\text{O}} = {\text{RT 1n}}\left[ {\frac{{(X_{{\text{Mg}}}^{{\text{opx}}} )^2 }}{{X_{{\text{Mg}}}^{{\text{M1}}} \cdot X_{{\text{Mg}}}^{{\text{M2}}} }}} \right] - \frac{1}{2}\{ W_{21} [2(X_{{\text{Ca}}}^{{\text{M2}}} )^3 - (X_{{\text{Ca}}}^{{\text{M2}}} ] \hfill \\ {\text{ + 2W}}_{{\text{22}}} [X_{{\text{Ca}}}^{{\text{M2}}} )^2 - (X_{{\text{Ca}}}^{{\text{M2}}} )^3 + \Delta {\text{G}}_{\text{*}}^{\text{0}} (X_{{\text{Ca}}}^{{\text{M1}}} \cdot X_{{\text{Ca}}}^{{\text{M2}}} )\} \hfill \\ {\text{ + W}}^{{\text{opx}}} (X_{{\text{Wo}}}^{{\text{opx}}} )^2 \hfill \\ \Delta \mu _{\text{B}}^{\text{O}} = {\text{RT 1n}}\left[ {\frac{{(X_{{\text{Ca}}}^{{\text{opx}}} )^2 }}{{X_{{\text{Ca}}}^{{\text{M1}}} \cdot X_{{\text{Ca}}}^{{\text{M2}}} }}} \right] - \frac{1}{2}\{ 2W_{21} [2(X_{{\text{Mg}}}^{{\text{M2}}} )^2 - (X_{{\text{Mg}}}^{{\text{M2}}} )^3 ] \hfill \\ {\text{ + W}}_{{\text{22}}} [2(X_{{\text{Mg}}}^{{\text{M2}}} )^3 - (X_{{\text{Mg}}}^{{\text{M2}}} )^2 + \Delta {\text{G}}_{\text{*}}^{\text{0}} (X_{{\text{Mg}}}^{{\text{M1}}} \cdot X_{{\text{Mg}}}^{{\text{M2}}} )\} \hfill \\ {\text{ + W}}^{{\text{opx}}} (X_{{\text{En}}}^{{\text{opx}}} )^2 \hfill \\ \hfill \\ \end{gathered} $$ where 1 $$\begin{gathered} \Delta \mu _{\text{A}}^{\text{O}} = 2.953 + 0.0602{\text{P}} - 0.00179{\text{T}} \hfill \\ \Delta \mu _{\text{B}}^{\text{O}} = 24.64 + 0.958{\text{P}} - (0.0286){\text{T}} \hfill \\ {\text{W}}_{{\text{21}}} = 47.12 + 0.273{\text{P}} \hfill \\ {\text{W}}_{{\text{22}}} = 66.11 + ( - 0.249){\text{P}} \hfill \\ {\text{W}}^{{\text{opx}}} = 40 \hfill \\ \Delta {\text{G}}_*^0 = 155{\text{ (all values are in kJ/gfw)}}{\text{.}} \hfill \\ \end{gathered} $$ . Site occupancies in clinopyroxene were determined from the internal equilibrium condition 1 $$\begin{gathered} \Delta G_{\text{E}}^{\text{O}} = - {\text{RT 1n}}\left[ {\frac{{X_{{\text{Ca}}}^{{\text{M1}}} \cdot X_{{\text{Mg}}}^{{\text{M2}}} }}{{X_{{\text{Ca}}}^{{\text{M2}}} \cdot X_{{\text{Mg}}}^{{\text{M1}}} }}} \right] + \tfrac{1}{2}[(2{\text{W}}_{{\text{21}}} - {\text{W}}_{{\text{22}}} )(2{\text{X}}_{{\text{Ca}}}^{{\text{M2}}} - 1) \hfill \\ {\text{ + }}\Delta G_*^0 (X_{{\text{Ca}}}^{{\text{M1}}} - X_{{\text{Ca}}}^{{\text{M2}}} ) + \tfrac{3}{2}(2{\text{W}}_{{\text{21}}} - {\text{W}}_{{\text{22}}} ) \hfill \\ {\text{ (1}} - 2X_{{\text{Ca}}}^{{\text{M1}}} )(X_{{\text{Ca}}}^{{\text{M1}}} + \tfrac{1}{2})] \hfill \\ \end{gathered} $$ where δG E 0 =153+0.023T+1.2P. The predicted concentrations of Ca on the clinopyroxene Ml site are low enough to be compatible with crystallographic studies. Temperatures calculated from the model for coexisting ortho- and clinopyroxene pairs fit the experimental data to within 10° in most cases; the worst discrepancy is 30°. Phase relations for clinopyroxene, orthopyroxene and pigeonite are successfully described by this model at temperatures up to 1,600° C and pressures from 0.001 to 40 kbar. Predicted enthalpies of solution agree well with the calorimetric measurements of Newton et al. (1979). The nonconvergent site disorder model affords good approximations to both the free energy and enthalpy of clinopyroxenes, and, therefore, the configurational entropy as well. This approach may provide an example for Febearing pyroxenes in which cation site exchange has an even more profound effect on the thermodynamic properties.  相似文献   

9.
The sulfide (H2S/HS?) that is emitted from hydrothermal vents begins to oxidize abiotically with oxygen upon contact with ambient bottom water, but the reaction kinetics are slow. Here, using in situ voltammetry, we report detection of the intermediate sulfur oxidation products polysulfides [ $ {\text{S}}_{\text{x}}^{2 - } $ ] and thiosulfate [ $ {\text{S}}_{ 2} {\text{O}}_{ 3}^{ 2- } $ ], along with contextual data on sulfide, oxygen, and temperature. At Lau Basin in 2006, thiosulfate was identified in less than one percent of approximately 10,500 scans and no polysulfides were detected. Only five percent of 11,000 voltammetric scans taken at four vent sites at Lau Basin in May 2009 show either thiosulfate or polysulfides. These in situ data indicate that abiotic sulfide oxidation does not readily occur as H2S contacts oxic bottom waters. Calculated abiotic potential sulfide oxidation rates are <10?3 ??M/min and are consistent with slow oxidation and the observed lack of sulfur oxidation intermediates. It is known that the thermodynamics for the first electron transfer step for sulfide and oxygen during sulfide oxidation in these systems are unfavorable, and that the kinetics for two electron transfers are not rapid. Here, we suggest that different metal catalyzed and/or biotic reaction pathways can readily produce sulfur oxidation intermediates. Via shipboard high-pressure incubation experiments, we show that snails with chemosynthetic endosymbionts do release polysulfides and may be responsible for our field observations of polysulfides.  相似文献   

10.
Sogdianite, a double-ring silicate of composition ( \textZr0. 7 6 \textTi0. 3 84 + \textFe0. 7 33 + \textAl0.13 )\Upsigma = 2 ( \square 1. 1 5 \textNa0. 8 5 )\Upsigma = 2 \textK[\textLi 3 \textSi 1 2 \textO 30 ] ( {\text{Zr}}_{0. 7 6} {\text{Ti}}_{0. 3 8}^{4 + } {\text{Fe}}_{0. 7 3}^{3 + } {\text{Al}}_{0.13} )_{\Upsigma = 2} \left( {\square_{ 1. 1 5} {\text{Na}}_{0. 8 5} } \right)_{\Upsigma = 2} {\text{K}}[{\text{Li}}_{ 3} {\text{Si}}_{ 1 2} {\text{O}}_{ 30} ] from Dara-i-Pioz, Tadjikistan, was studied by the combined application of 57Fe M?ssbauer spectroscopy and electronic structure calculations. The M?ssbauer spectrum confirms published microprobe and X-ray single-crystal diffraction results that indicate that Fe3+ is located at the octahedral A-site and that no Fe2+ is present. Both the measured and calculated quadrupole splitting, ΔE Q, for Fe3+ are virtually 0 mm s−1. Such a value is unusually small for a silicate and it is the same as the ΔE Q value for Fe3+ in structurally related sugilite. This result is traced back to the nearly regular octahedral coordination geometry corresponding to a very symmetric electric field gradient around Fe3+. A crystal chemical interpretation for the regular octahedral geometry and the resulting low ΔE Q value for Fe3+ in the M?ssbauer spectrum of sogdianite is that structural strain is largely “taken up” by weak Li–O bonds permitting highly distorted LiO4 tetrahedra. Weak Li–O bonding allows the edge-shared more strongly bonded Fe3+O6 octahedra to remain regular in geometry. This may be a typical property for all double-ring silicates with tetrahedrally coordinated Li.  相似文献   

11.
Uranium mineralization in the El Erediya area, Egyptian Eastern Desert, has been affected by both high temperature and low temperature fluids. Mineralization is structurally controlled and is associated with jasperoid veins that are hosted by a granitic pluton. This granite exhibits extensive alteration, including silicification, argillization, sericitization, chloritization, carbonatization, and hematization. The primary uranium mineral is pitchblende, whereas uranpyrochlore, uranophane, kasolite, and an unidentified hydrated uranium niobate mineral are the most abundant secondary uranium minerals. Uranpyrochlore and the unidentified hydrated uranium niobate mineral are interpreted as alteration products of petscheckite. The chemical formula of the uranpyrochlore based upon the Electron Probe Micro Analyzer (EPMA) is . It is characterized by a relatively high Zr content (average ZrO2 = 6.6 wt%). The average composition of the unidentified hydrated uranium niobate mineral is , where U and Nb represent the dominant cations in the U and Nb site, respectively. Uranophane is the dominant U6+ silicate phase in oxidized zones of the jasperoid veins. Kasolite is less abundant than uranophane and contains major U, Pb, and Si but only minor Ca, Fe, P, and Zr. A two-stage metallogenetic model is proposed for the alteration processes and uranium mineralization at El Erediya. The primary uranium minerals were formed during the first stage of the hydrothermal activity that formed jasperoid veins in El Eradiya granite (130–160 Ma). This stage is related to the Late Jurassic–Early Cretaceous phase of the final Pan-African tectono-thermal event in Egypt. After initial formation of El Erediya jasperoid veins, a late stage of hydrothermal alteration includes argillization, dissolution of iron-bearing sulfide minerals, formation of iron-oxy hydroxides, and corrosion of primary uranium minerals, resulting in enrichment of U, Ca, Pb, Zr, and Si. During this stage, petscheckite was altered to uranpyrochlore and oxy-petscheckite. Uranium was likely transported as uranyl carbonate and uranyl fluoride complexes. With change of temperature and pH, these complexes became unstable and combined with silica, calcium, and lead to form uranophane and kasolite. Finally, at a later stage of low-temperature supergene alteration, oxy-petscheckite was altered to an unidentified hydrated uranium niobate mineral by removal of Fe.  相似文献   

12.
Bottom-water hypoxia effects on sediment–water interface nitrogen (N) transformations in Corpus Christi Bay (TX, USA) were examined using continuous-flow intact sediment core incubations. Sediment cores were collected from three sites in August 2002 (summer hypoxia) and April 2003 (normoxia). Oxygen (O2) and hydrogen sulfide (H2S) depth profiles were generated with microelectrodes. Membrane inlet mass spectrometry was used to measure sediment O2 demand and net N2 flux and combined with isotope pairing to determine potential denitrification and N fixation. Potential dissimilatory nitrate reduction to ammonium (DNRA) was measured using high-performance liquid chromatography. Sediment O2 penetration depths ranged from 5 to 10 mm. H2S ranged from being present in overlying water and throughout the sediment column in August to not detectable in overlying water or sediment in April. Sediment O2 demand was higher during bottom-water normoxia conditions versus hypoxia. Sediments were a significant source of \textNH\text4\text + {\text{NH}}_{\text{4}}^{\text{ + }} to overlying water during hypoxia but not during normoxia. Net N2 fixation was observed at one station in August and all stations in April. Denitrification rates were significantly higher during hypoxia at two of three sites. Potential DNRA was observed during both oxic states, but rates were significantly higher during hypoxia, which may reflect sulfide enhancement and absence of cation exchange with \text14 \textNH\text4\text + ^{{\text{14}}} {\text{NH}}_{\text{4}}^{\text{ + }} . DNRA may contribute to formation and maintenance of bottom-water hypoxic events in this system. These results show that N transformation pathways and rates change when bottom-water O2 concentrations drop to hypoxic levels. Since south Texas is a semiarid region with few episodic runoff events, these results indicate that Corpus Christi Bay sediments are a N source most of the year, and denitrification may drive N limitation between episodic runoff events.  相似文献   

13.
Empirical equations to predict the sulfur content of a mafic magma at the time of sulfide saturation have been developed based on several sets of published experimental data. The S content at sulfide saturation (SCSS) can be expressed as:
where T is in degrees Kelvin, X is mole fraction and P is in kbar. The squared multiple correlation coefficient (r 2) for the equation is 0.88. Application of the equation to data from sulfide-saturated mid-ocean ridge basalts (MORB) samples show that the SCSS is closely predicted for primitive MORBs, but that accuracy decreases for lower T (<1,130°C) and more evolved MORB samples. This suggests that because the calibrations are based on anhydrous experimental runs done at temperatures of 1,200°C and above, it is not possible to extrapolate them to significantly lower temperatures and hydrous conditions. Because the SCSS of a primitive MORB magma increases with decreasing P, sulfide saturation in MORB appears to be a function of the degree of en route assimilation of S from country rocks as well as the degree of fractional crystallization in shallow staging chambers. Application of the equation to the high-T impact melt sheet that produced the Sudbury Igneous Complex and associated Ni–Cu sulfide ores indicates that sulfide-saturation was reached at ~1,500°C, well above the start of orthopyroxene crystallization at ~1,190°C. This would permit ample time for the gravitational settling and collection of immiscible sulfide liquid that produced the high-grade ore bodies. The development of a platinum group element (PGE)-enriched layer in the Sonju Lake Intrusion of the Duluth Complex is thought to be due to the attainment of sulfide saturation in the magma after a period of fractional crystallization. Using the composition of the parent magma of the Sonju Lake Intrusion the presented equation indicates that sulfide saturation would have been reached at ~60% crystallization, when iron oxide was a liquidus mineral; the prediction is in agreement with field evidence which indicates that PGE-enrichment occurs in the oxide-rich gabbro zone. Contamination and mixing processes that may be related to the attainment of sulfide saturation in mafic magmas can also be evaluated. Mixing of a siliceous melt and a liquid of olivine tholeiite composition, similar to that thought to be a reasonable parental composition for many Duluth Complex intrusions, can induce sulfide saturation at mixing ratios in excess of ~0.1. If the contaminant contains low quantities of sulfur the mixing ratio required to promote saturation is reduced. Mixing of mafic magmas at various stages of fractionation is evaluated using magma compositions that are thought to be appropriate for the generation of the Merensky Reef in the Bushveld Complex. Magma mixing is shown to be an effective process for the attainment of sulfide saturation, depending strongly on the sulfur concentrations of the end-member magmas.  相似文献   

14.
The diffusion of water in a peralkaline and a peraluminous rhyolitic melt was investigated at temperatures of 714–1,493 K and pressures of 100 and 500 MPa. At temperatures below 923 K dehydration experiments were performed on glasses containing about 2 wt% H2O t in cold seal pressure vessels. At high temperatures diffusion couples of water-poor (<0.5 wt% H2O t ) and water-rich (~2 wt% H2O t ) melts were run in an internally heated gas pressure vessel. Argon was the pressure medium in both cases. Concentration profiles of hydrous species (OH groups and H2O molecules) were measured along the diffusion direction using near-infrared (NIR) microspectroscopy. The bulk water diffusivity () was derived from profiles of total water () using a modified Boltzmann-Matano method as well as using fittings assuming a functional relationship between and Both methods consistently indicate that is proportional to in this range of water contents for both bulk compositions, in agreement with previous work on metaluminous rhyolite. The water diffusivity in the peraluminous melts agrees very well with data for metaluminous rhyolites implying that an excess of Al2O3 with respect to alkalis does not affect water diffusion. On the other hand, water diffusion is faster by roughly a factor of two in the peralkaline melt compared to the metaluminous melt. The following expression for the water diffusivity in the peralkaline rhyolite as a function of temperature and pressure was obtained by least-squares fitting:
where is the water diffusivity at 1 wt% H2O t in m2/s, T is the temperature in K and P is the pressure in MPa. The above equation reproduces the experimental data (14 runs in total) with a standard fit error of 0.15 log units. It can be employed to model degassing of peralkaline melts at water contents up to 2 wt%.  相似文献   

15.
The addition of Fe and Cr to the simple system MgO-SiO2-Al2O3 markedly affects the activities of phases involved in the equilibrium
\textMg\text2 \textSiO\text4 \text + MgAl\text2 \textSiO\text6 \text = MgAl\text2 \textO\text4 \text + Mg\text2 \textSi\text2 \textO\text6 \textOlivine + Opx\textsolid solution \text = Spinel + Opx\textsolid solution \begin{gathered} {\text{Mg}}_{\text{2}} {\text{SiO}}_{\text{4}} {\text{ + MgAl}}_{\text{2}} {\text{SiO}}_{\text{6}} {\text{ = MgAl}}_{\text{2}} {\text{O}}_{\text{4}} {\text{ + Mg}}_{\text{2}} {\text{Si}}_{\text{2}} {\text{O}}_{\text{6}} \hfill \\ {\text{Olivine + Opx}}_{{\text{solid solution}}} {\text{ = Spinel + Opx}}_{{\text{solid solution}}} \hfill \\ \end{gathered}  相似文献   

16.
Detailed investigation of an intermediate member of the reddingite–phosphoferrite series, using infrared and Raman spectroscopy, scanning electron microcopy and electron microprobe analysis, has been carried out on a homogeneous sample from a lithium-bearing pegmatite named Cigana mine, near Conselheiro Pena, Minas Gerais, Brazil. The determined formula is $ ({\text{Mn}}_{1.60} {\text{Fe}}_{1.21} {\text{Ca}}_{0.01} {\text{Mg}}_{0.01} )_{\sum 2.83} ({\text{PO}}_{4} )_{2.12} \cdot ({\text{H}}_{2} {\text{O}}_{2.85} {\text{F}}_{0.01} )_{\sum 2.86} $ , indicating predominance in the reddingite member. Raman spectroscopy coupled with infrared spectroscopy supports the concept of phosphate, hydrogen phosphate and dihydrogen phosphate units in the structure of reddingite-phosphoferrite. Infrared and Raman bands attributed to water and hydroxyl stretching modes are identified. Vibrational spectroscopy adds useful information to the molecular structure of reddingite–phosphoferrite.  相似文献   

17.
A wide set of aqueous chemistry data (574 water analyses) from natural environments has been used to testify and validate of the solubility of synthetic hydroxyaluminosilicate (HASB), Al2Si2O5(OH)4. The ground and surface waters represent regolith and/or fissure aquifers in various (magmatic, sedimentary and metamorphic) bedrocks in the Sudetes Mts. (SW Poland). The solubility of HASB in natural waters was calculated using the method proposed by Schneider et al. (Polyhedron 23:3185–3191, 2004). Results confirm usefulness and validity of this method. The HASB solubility obtained from the field data (logKsp = −44.7 ± 0.58) is lower than it was estimated (logKsp = −40.6 ± 0.15) experimentally (Schneider et al. Polyhedron 23:3185–3191, 2004). In the waters studied the equilibrium with HASB is maintained at pH above 6.7 and at [Al3+] ≤ 10−10. Silicon activity (log[H4SiO4]) ranges between −4.2 and −3.4. Due to the calculation method used, the Ksp mentioned above cannot be considered as a classical solubility constant. However, it can be used in the interpretation of aluminium solubility in natural waters. The HASB has solubility lower than amorphous Al(OH)3, and higher than proto-imogolite. From water samples that are in equilibrium with respect to HASB, the solubility product described by the reaction, is calculated to be logKsp = 14.0 (±0.7) at 7°C.  相似文献   

18.
Single crystals of devitrite (Na2Ca3Si6O16) were synthesized as pale-yellow transparent needle shaped crystals using a Na2MoO4-flux. Experiments aiming to prepare the K-equivalent of devitrite from the corresponding K2MoO4-flux were unsuccessful. The crystal structure of devitrite was determined from single-crystal X-ray diffraction data (Mo-Kα radiation, 2θmax.?=?25.34°, Rint?=?2.66%) and refined in space group P $ \bar{1} $ (no. 2) to R(|F|)?=?3.08% using 2,513 observed reflections with I?>?2σ(I). Unit-cell parameters are: a?=?7.2291(8), b?=?10.1728(12), c?=?10.6727(12) Å, α?=?95.669(9), β?=?109.792(10), γ?=?99.156(9)°, V?=?719.19(14) Å3, Z?=?2. The structure belongs to the group of multiple chain silicates consisting of dreier quadruple chains, i.e. the crystallochemical formula can be written as $ {\hbox{N}}{{\hbox{a}}_2}{\hbox{C}}{{\hbox{a}}_3}\left\{ {{\mathbf{uB}}{,4}_\infty^1} \right\}\left[ {^3{\hbox{S}}{{\hbox{i}}_6}} \right.\left. {{{\hbox{O}}_{16}}} \right\} $ . Linkage between the bands running along [100] is provided by double chains of edge sharing CaO6-octahedra as well as additional more irregularly coordinated Na- and Ca-cations located in the tunnel-like cavities of the mixed tetrahedral-octahedral framework. Structural investigations were completed by Raman and infrared spectroscopical studies. The allocation of the bands to certain vibrational species was aided by density functional theory (DFT) calculations.  相似文献   

19.
Sekaninaite (XFe > 0.5)-bearing paralava and clinker are the products of ancient combustion metamorphism in the western part of the Kuznetsk coal basin, Siberia. The combustion metamorphic rocks typically occur as clinker beds and breccias consisting of vitrified sandstone–siltstone clinker fragments cemented by paralava, resulting from hanging-wall collapse above burning coal seams and quenching. Sekaninaite–Fe-cordierite (XFe = 95–45) is associated with tridymite, fayalite, magnetite, ± clinoferrosilite and ±mullite in paralava and with tridymite and mullite in clinker. Unmelted grains of detrital quartz occur in both rocks (<3 vol% in paralavas and up to 30 vol% in some clinkers). Compositionally variable siliceous, K-rich peraluminous glass is <30% in paralavas and up to 85% in clinkers. The paralavas resulted from extensive fusion of sandstone–siltstone (clinker), and sideritic/Fe-hydroxide material contained within them, with the proportion of clastic sediments ≫ ferruginous component. Calculated dry liquidus temperatures of the paralavas are 1,120–1,050°C and 920–1,050°C for clinkers, with calculated viscosities at liquidus temperatures of 101.6–7.0 and 107.0–9.8 Pa s, respectively. Dry liquidus temperatures of glass compositions range between 920 and 1,120°C (paralava) and 920–960°C (clinker), and viscosities at these temperatures are 109.7–5.5 and 108.8–9.7 Pa s, respectively. Compared with worldwide occurrences of cordierite–sekaninaite in pyrometamorphic rocks, sekaninaite occurs in rocks with XFe (mol% FeO/(FeO + MgO)) > 0.8; sekaninaite and Fe-cordierite occur in rocks with XFe 0.6–0.8, and cordierite (XFe < 0.5) is restricted to rocks with XFe < 0.6. The crystal-chemical formula of an anhydrous sekaninaite based on the refined structure is | \textK0.02 |(\textFe1.542 + \textMg0.40 \textMn0.06 )\Upsigma 2.00M [(\textAl1.98 \textFe0.022 + \textSi1.00 )\Upsigma 3.00T1 (\textSi3.94 \textAl2.04 \textFe0.022 + )\Upsigma 6.00T2 \textO18 ]. \left| {{\text{K}}_{0.02} } \right|({\text{Fe}}_{1.54}^{2 + } {\text{Mg}}_{0.40} {\text{Mn}}_{0.06} )_{\Upsigma 2.00}^{M} [({\text{Al}}_{1.98} {\text{Fe}}_{0.02}^{2 + } {\text{Si}}_{1.00} )_{\Upsigma 3.00}^{T1} ({\text{Si}}_{3.94} {\text{Al}}_{2.04} {\text{Fe}}_{0.02}^{2 + } )_{\Upsigma 6.00}^{T2} {\text{O}}_{18} ].  相似文献   

20.
Five geobarometers involving cordierite have been formulated for quantitative pressure sensing in high grade metapelites. The relevant reactions in the FeO-Al2O3-SiO2 (±H2O) system are based on the assemblages (A) cordierite-garnet-sillimanite-quartz, (B) cordierite-spinel-quartz, (C) cordierite-garnet-spinel-sillimanite, (D) cordierite-garnet-orthopyroxene-quartz and (E) cordierite-orthopyroxene-sillimanite-quartz. Application of the barometric formulations to a large number of granulite grade rocks indicates that the cordierite-garnet-sillimanite-quartz equilibrium is widely applicable and registers pressures which are in good agreement with the “consensus” pressure estimates. The dispersion in the computed P values, expressed as one standard deviation, is within ±1.2 kbar. The geobarometers (B) and (C) also yield pressures which are reasonable and compare well with those computed from equilibrium (A). The estimated pressures from (D) and (E), both involving orthopyroxene, are at variance with these estimates. It has been argued that the discrepancy in pressures obtained from these geobarometers stems from an inadequate knowledge of activity-composition relations and/or errors in input thermodynamic data of aluminous orthopyroxene. The convergence of pressure values estimated from the barometric formulations, especially (A), (B) and (C), implies that the present formulations are more dependable than the existing formulations and are also capable of setting limits on P values in response to varying $$\begin{gathered} {\text{1/2Fe}}_{\text{2}} {\text{Al}}_{\text{4}} {\text{Si}}_{\text{5}} {\text{O}}_{{\text{18}}} \hfill \\ {\text{ = 1/3Fe}}_{\text{3}} {\text{Al}}_{\text{2}} {\text{Si}}_{\text{3}} {\text{O}}_{{\text{12}}} {\text{ + 2/3Al}}_{\text{2}} {\text{SiO}}_{\text{5}} {\text{ + 5/6SiO}}_{\text{2}} {\text{. (A)}} \hfill \\ {\text{1/2Fe}}_{\text{2}} {\text{Al}}_{\text{4}} {\text{Si}}_{\text{5}} {\text{O}}_{{\text{18}}} {\text{ = FeAl}}_{\text{2}} {\text{O}}_{\text{4}} {\text{ + 5/2SiO}}_{\text{2}} {\text{. (B)}} \hfill \\ {\text{Fe}}_{\text{2}} {\text{Al}}_{\text{4}} {\text{Si}}_{\text{5}} {\text{O}}_{{\text{18}}} {\text{ + FeAl}}_{\text{2}} {\text{O}}_{\text{4}} \hfill \\ = {\text{Fe}}_{\text{3}} {\text{Al}}_{\text{2}} {\text{Si}}_{\text{3}} {\text{O}}_{{\text{12}}} {\text{ + 2Al}}_{\text{2}} {\text{SiO}}_{\text{5}} {\text{. (C)}} \hfill \\ {\text{1/2Fe}}_{\text{2}} {\text{Al}}_{\text{4}} {\text{Si}}_{\text{5}} {\text{O}}_{{\text{18}}} {\text{ + Fe}}_{\text{2}} {\text{Si}}_{\text{2}} {\text{O}}_{\text{6}} \hfill \\ = {\text{Fe}}_{\text{3}} {\text{Al}}_{\text{2}} {\text{Si}}_{\text{3}} {\text{O}}_{{\text{12}}} {\text{ + 3/2SiO}}_{\text{2}} .{\text{ (D)}} \hfill \\ {\text{1/2Fe}}_{\text{2}} {\text{Al}}{}_{\text{4}}{\text{Si}}_{\text{5}} {\text{O}}_{{\text{18}}} \hfill \\ = 1/2{\text{Fe}}_{\text{2}} {\text{Si}}_{\text{2}} {\text{O}}_{\text{6}} {\text{ + Al}}_{\text{2}} {\text{SiO}}_{\text{5}} {\text{ + 1/2SiO}}_{\text{2}} .{\text{ (E)}} \hfill \\ \end{gathered}$$ . The present communication addresses the calibration, applicability and reliability of these barometers with reference to granulite facies metapelites.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号