首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Desert mine tailings may accumulate toxic metals in the near surface centimeters because of low water through-flux rates. Along with other constraints, metal toxicity precludes natural plant colonization even over decadal time scales. Since unconsolidated particles can be subjected to transport by wind and water erosion, potentially resulting in direct human and ecosystem exposure, there is a need to know how the lability and form of metals change in the tailings weathering environment. A combination of chemical extractions, X-ray diffraction, micro-X-ray fluorescence spectroscopy, and micro-Raman spectroscopy were employed to study Pb and Zn contamination in surficial arid mine tailings from the Arizona Klondyke State Superfund Site. Initial site characterization indicated a wide range in pH (2.5–8.0) in the surficial tailings pile. Ligand-promoted (DTPA) extractions, used to assess plant-available metal pools, showed decreasing available Zn and Mn with progressive tailings acidification. Aluminum shows the inverse trend, and Pb and Fe show more complex pH dependence. Since the tailings derive from a common source and parent mineralogy, it is presumed that variations in pH and “bio-available” metal concentrations result from associated variation in particle–scale geochemistry. Four sub-samples, ranging in pH from 2.6 to 5.4, were subjected to further characterization to elucidate micro-scale controls on metal mobility. With acidification, total Pb (ranging from 5 to 13 g kg−1) was increasingly associated with Fe and S in plumbojarosite aggregates. For Zn, both total (0.4–6 g kg−1) and labile fractions decreased with decreasing pH. Zinc was found to be primarily associated with the secondary Mn phases manjiroite and chalcophanite. The results suggest that progressive tailings acidification diminishes the overall lability of the total Pb and Zn pools.  相似文献   

2.
  相似文献   

3.
In this study we investigated the sulphidic mine tailings from Frongoch and Grogwynion, two abandoned lead zinc mines in mid-Wales, UK. Despite falling within the same ore field the mine waste characterisation has identified differences in the tailings from the two sites. Bulk concentrations range from 10 to 52 g kg− 1 for Pb, 1.1 to 2.9 g kg− 1 for Zn in Grogwynion and from 1.0 to 130 g kg− 1 for Pb, 11 to 110 g kg− 1 for Zn in Frongoch. An experimental (European standard leaching tests TS 14429 and TS 14405) and geochemical modelling approach was used to study the leaching composition as a function of pH and liquid/solid ratio. There was little correlation between the tailings bulk metal concentrations and the leachate composition, but variations in Pb and Zn concentrations were found to be consistent with control of dissolved Pb and Zn by secondary minerals and the mechanisms of dissolution/precipitation/sorption involving them. Specifically, the Grogwynion mine tailings with near-neutral pH have predominantly lead and zinc carbonates controlling Pb and Zn solubility in the leachates, whereas the Pb and Zn concentrations in Frongoch leachates are best modelled with a surface complexation model for metal sorption to oxyhydroxides. The different speciation results in a greater sensitivity of Grogwynion tailings to acidification with a potential release of Pb in solution up to 10 times higher than in Frongoch, despite similar bulk Pb concentrations. At acid pH, Zn is similarly dissolved to a greater extent in Grogwynion than in Frongoch tailings. There was no evidence of sulphide oxidation during the batch and column leaching tests and the suitability of using these European leaching standards for the characterisation of sulphidic mine waste materials for waste management purposes has been considered.  相似文献   

4.
Passive treatment systems are widely used for remediation of acid mine drainage (AMD), but existing designs are prone to clogging or loss of reactivity due to Al- and Fe-precipitates when treating water with high Al and heavy metal concentrations. Dispersed alkaline substrate (DAS) mixed from a fine-grained alkaline reagent (e.g. calcite sand) and a coarse inert matrix (e.g. wood chips) had shown high reactivity and good hydraulic properties in previous laboratory column tests. In the present study, DAS was tested at pilot field scale in the Iberian Pyrite Belt (SW Spain) on metal mine drainage with pH near 3.3, net acidity 1400–1650 mg/L as CaCO3, and mean concentrations of 317 mg/L Fe (95% Fe(II)), 311 mg/L Zn, 74 mg/L Al, 20 mg/L Mn, and 1.5–0.1 mg/L Cu, Co, Ni, Cd, As and Pb. The DAS-tank removed an average of 870 mg/L net acidity as CaCO3 (56% of inflow), 25% Fe, 93% Al, 5% Zn, 95% Cu, 99% As, 98% Pb, and 14% Cd, but no Mn, Ni or Co. Average gross drain pipe alkalinity was 181 mg/L as CaCO3, which increased total Fe removal to 153 mg/L (48%) in subsequent sedimentation ponds. Unfortunately, the tank suffered clogging problems due to the formation of a hardpan of Al-rich precipitates. DAS lifetime could probably be increased by lowering Al-loads.  相似文献   

5.
Acid mine drainage (AMD) from the Zn–Pb(–Ag–Bi–Cu) deposit of Cerro de Pasco (Central Peru) and waste water from a Cu-extraction plant has been discharged since 1981 into Lake Yanamate, a natural lake with carbonate bedrock. The lake has developed a highly acidic pH of ∼1. Mean lake water chemistry was characterized by 16,775 mg/L acidity as CaCO3, 4330 mg/L Fe and 29,250 mg/L SO4. Mean trace element concentrations were 86.8 mg/L Cu, 493 mg/L Zn, 2.9 mg/L Pb and 48 mg/L As, which did not differ greatly from the discharged AMD. Most elements showed increasing concentrations from the surface to the lake bottom at a maximal depth of 41 m (e.g. from 3581 to 5433 mg/L Fe and 25,609 to 35,959 mg/L SO4). The variations in the H and O isotope compositions and the element concentrations within the upper 10 m of the water column suggest mixing with recently discharged AMD, shallow groundwater and precipitation waters. Below 15 m a stagnant zone had developed. Gypsum (saturation index, SI ∼ 0.25) and anglesite (SI ∼ 0.1) were in equilibrium with lake water. Jarosite was oversaturated (SI ∼ 1.7) in the upper part of the water column, resulting in downward settling and re-dissolution in the lower part of the water column (SI ∼ −0.7). Accordingly, jarosite was only found in sediments from less than 7 m water depth. At the lake bottom, a layer of gel-like material (∼90 wt.% water) of pH ∼1 with a total organic C content of up to 4.40 wet wt.% originated from the kerosene discharge of the Cu-extraction plant and had contaminant element concentrations similar to the lake water. Below the organic layer followed a layer of gypsum with pH 1.5, which overlaid the dissolving carbonate sediments of pH 5.3–7. In these two layers the contaminant elements were enriched compared to lake water in the sequence As < Pb ≈ Cu < Cd < Zn = Mn with increasing depth. This sequence of enrichment was explained by the following processes: (i) adsorption of As on Fe-hydroxides coating plant roots at low pH (up to 3326 mg/kg As), (ii) adsorption at increasing pH near the gypsum/calcite boundary (up to 1812 mg/kg Pb, 2531 mg/kg Cu, and 36 mg/kg Cd), and (iii) precipitation of carbonates (up to 5177 mg/kg Zn and 810 mg/kg Mn; all data corrected to a wet base). The infiltration rate was approximately equal to the discharge rate, thus gypsum and hydroxide precipitation had not resulted in complete clogging of the lake bedrocks.  相似文献   

6.
The comparative behaviour of Ni, Cu and Zn in the system “mine tailings–ground water–plants” has been investigated at the Ni–Cu mine site operated by INCO Ltd. Thompson Operations, Thompson, Manitoba. Oxidation of sulphide minerals causes the release of metals from exposed tailings containing Ni ∼2000 ppm, Cu ∼150 ppm and Zn ∼100 ppm to the ground water, which contains 350 mg/L Ni, 0.007 mg/L Cu, and 1.6 mg/L Zn. The metal concentration in the ground water is affected by the relative proportions of sulfide minerals, the rate of oxidation of sulphide minerals (Ni-bearing pyrrhotite > sphalerite > chalcopyrite), and the affinity of the metals for secondary Fe-phases (Ni > Zn > Cu).  相似文献   

7.
A series of laboratory column tests on reactive mine tailings was numerically simulated to study the effect of high water saturation on preventing sulfide mineral oxidation and acid mine drainage (AMD). The approach, also known as an elevated water table (EWT), is a promising alternative to full water covers for the management and closure of sulfidic tailings impoundments and for the long term control of acid mine drainage. The instrumented columns contained reactive tailings from the Louvicourt mine, Quebec, and were overlain by a protective sand cover. Over a 13–19 month period, the columns were exposed to atmospheric O2 and flushed approximately every month with demineralized water. A free draining control column with no sand cover was also used. During each cycle, water table elevations were controlled by fixing the pressure at the column base and drainage water was collected and analyzed for pH and Eh, major ions, and dissolved metals (Fe, Zn, Cu, Pb, and Mg). The columns were simulated using the multi-component reactive transport model MIN3P which solves the coupled nonlinear equations for transient water flow, O2 diffusion, advective–dispersive transport and kinetic geochemical reactions. Physical properties and mineralogical compositions for the material layers were obtained from independent laboratory data. The simulated and observed data showed that as the water table elevation increased, the effluent pH became more neutral and SO4 and dissolved metal concentrations decreased by factors on the order of 102–103. It is concluded that water table depths less than or equal to one-half of the air entry value (AEV) can keep mine tailings sufficiently saturated over the long term, thus reducing sulfide oxidation and AMD production.  相似文献   

8.
This article investigates the relationship between soil Cd, Cu, Pb and Zn contaminants and the location and activities of the Pb–Zn–Ag and Cu mines at Mount Isa, Queensland, Australia. Analysis of the data focuses primarily on soil Pb distributions and concentrations because of their potential impact on children’s health. The Xstrata Mount Isa Mines lease (XMIM) is Australia’s leading emitter of numerous contaminants to the environment, including Cu and Pb, and the mining-related activities have been linked causally to the findings of a 2008 study that showed 11.3% of local children (12–60 months) have blood Pb levels >10 μg/dL. Queensland government authorities and Xstrata Mount Isa Mines Pty Ltd maintain that contaminants within environmental systems around Mount Isa are largely the result of near-surface mineralization. The evidence for whether the contamination is derived from XMIM or other possible sources, such as the natural weathering of ore-rich bedrock, is investigated using data from surface and subsurface soil chemistry, atmospheric modelling of metal contaminants from mining and smelting operations and local geological and associated geochemical studies. Sixty surface soil samples collected from sites adjacent to houses, parks and schools throughout Mount Isa city were analyzed for their total extractable Cd, Cu, Pb and Zn concentrations in the <2 mm to >180 μm (coarser) and <180 μm (finer) grain size fractions. Concentrations in the finer size fraction reveal a range of values: Cd – 0.7–12.5 ppm; Cu – 31–12,100 ppm; Pb – 8–5770 ppm; Zn – 26–11,100 ppm, with several samples exceeding Australian residential health investigation guidelines. Spatial analysis shows that surface soil metal concentrations are significantly higher within 2 km of XMIM compared to more distant samples, and that more than 1000 property lots are at risk of having detrimentally high soil Pb levels. Determination of metal concentrations in 49 samples from eight soil pits shows that surface samples (0–2 cm) are enriched significantly relative to those at depth (10–20 cm), suggesting an atmospheric depositional origin. AUSPLUME air dispersal modelling of Pb originating from the Cu and Pb smelter stacks and mine site fugitive sources confirms that Pb is deposited across the urban area, during periods of the year (∼20%/a) when the wind blows from the direction of XMIM towards the urban area and disperses dusts from the uncovered spoil and road surfaces, as well as from stack emission sources. Although there are some spatially restricted outcrops of Pb close to the surface in parts of the urban area, the Cu-ore body is ∼244 m below the surface. However, enriched and significantly correlated surface soil concentrations of Cu and Pb (Pearson correlation 0.879, p = 0.000) in and around the urban area of Mount Isa can only be explained by atmospheric transport and deposition of metals from the adjoining mining and smelting operations. The results from this study provide unequivocal evidence that both historic and ongoing emissions from XMIM are contaminating the urban environment. Given the ongoing Pb poisoning issues in Mount Isa children, it is clear that remediation, reductions in mine emissions and more stringent regulatory actions are warranted.  相似文献   

9.
Synchrotron-based X-ray radiation microfluorescence (μ-SXRF) and micro-focused and powder extended X-ray absorption fine structure (EXAFS) spectroscopy measurements, combined with desorption experiments and thermodynamic calculations, were used to evaluate the solubility of metal contaminants (Zn, Cu, Pb) and determine the nature and fractional amount of Zn species in a near-neutral pH (6.5-7.0) truck-farming soil contaminated by sewage irrigation for one hundred years. Zn is the most abundant metal contaminant in the soil (1103 mg/kg), followed by Pb (535 mg/kg) and Cu (290 mg/kg). The extractability of Zn, Pb, and Cu with citrate, S,S-ethylenediaminedisuccinic acid (EDDS), and ethylenediaminetetraacetic acid (EDTA) was measured as a function of time (24 h, 72 h, 144 h), and also as a function of the number of applications of the chelant (5 applications each with 24 h of contact time). Fifty-three percent of the Zn was extracted after 144 h with citrate, 51% with EDDS and 46% with EDTA, compared to 69, 87, and 61% for Cu, and 24, 40, and 34% for Pb. Renewing the extracting solution removed more of the metals. Seventy-nine, 65, and 57% of the Zn was removed after five cycles with citrate, EDDS and EDTA, respectively, compared to 88, 100, and 72% for Cu, and 91, 65, and 47% for Pb. Application to the untreated soil of μ-SXRF, laterally resolved μ-EXAFS combined with principal component analysis, and bulk averaging powder EXAFS with linear least-squares combination fit of the data, identified five Zn species: Zn-sorbed ferrihydrite, Zn phosphate, Zn-containing trioctahedral phyllosilicate (modeled by the Zn kerolite, Si4(Mg1.65Zn1.35)O10(OH)2 · nH2O), willemite (Zn2SiO4), and gahnite (ZnAl2O4), in proportions of ∼30, 28, 24, 11, and less than 10%, respectively (precision: 10% of total Zn). In contrast to Cu and Pb, the same fractional amount of Zn was extracted after 24 h contact time with the three chelants (40-43% of the initial content), suggesting that one of the three predominant Zn species was highly soluble under the extraction conditions. Comparison of EXAFS data before and after chemical treatment revealed that the Zn phosphate component was entirely and selectively dissolved in the first 24 h of contact time. Preferential dissolution of the Zn phosphate component is supported by thermodynamic calculations. Despite the long-term contamination of this soil, about 79% of Zn, 91% of Pb, and 100% of Cu can be solubilized in the laboratory on a time scale of a few days by chemical complexants. According to metal speciation results and thermodynamic calculations, the lower extraction level measured for Zn is due to the Zn phyllosilicate component, which is less soluble than Zn phosphate and Zn ferrihydrite.  相似文献   

10.
Passive treatment systems have become one of the most sustainable and feasible ways of remediating acid mine drainage (AMD). However, conventional treatments show early clogging of the porosity or/and coating of the reactive grains when high acidity and metal concentrations are treated. The performance of fine-grained reagents dispersed in a high porosity matrix of wood shavings was tested as an alternative to overcome these durability problems. The system consisted of two tanks of 3 m3 filled with limestone sand and wood shavings, and one tank of 1 m3 with caustic magnesia powder and wood shavings, separated by several oxidation cascades and decantation ponds. The system treated about 1.5 m3/day of AMD containing an average of 360 mg/L Fe, 120 mg/L Al, 390 mg/L Zn, 10 mg/L Cu, 300 μg/L As and 140 μg/L Pb, a mean pH of 3.08 and a net acidity of 2500 mg/L as CaCO3 equivalent. The water reached pH 5 and 6 in the first and second limestone tanks, respectively (suitable to remove trivalent metals); and pH 8–9 in the MgO tank (suitable to remove divalent metals). After 9 months of operation, the system achieved an average removal of 100% Al, Cu, As, Pb, more than 70% Fe, about 25% Zn and 80% acidity. Goethite, schwertmannite, hydrobasaluminite, amorphous Al(OH)3 and gypsum were the main precipitates in the two limestone tanks. Precipitation of divalent metals (Fe (II), Zn, and traces of Cd, Ni and Co) were complete inside the third tank of MgO, but preferential flow along the walls was responsible for its low treatment performance. Goethite, gypsum, Zn-schulenbergite and sauconite are the crystalline solid phases identified in the MgO tank.  相似文献   

11.
The geochemistry and mineralogy of samples collected along depth profiles from an As-rich tailing deposit with abundant calcite was studied to determine the processes that influence the mobility of Fe, Zn, Cu, Ni, Cd, As, Sb, Cr and Tl. In spite of their near neutral pH, almost all of them are acid potential generators. Total concentrations decreased as: Fe > As > Zn > Pb > Cu > Sb > Cd > Cr > Ni > Tl. Soluble contents were lower and followed a slightly different order. Mobility decreased as: Tl > Cd, Zn, Cu, Sb, Ni, As > Fe, Pb > Cr. Higher soluble concentrations of Fe, Cu, Zn, As, Pb, and Ni were found in low-pH samples and of Sb and Tl in near-neutral samples. Sulfide oxidation processes are developing in the tailing’s dam. These processes do not have a trend with depth but occur mainly in acid layers. Near neutral layers formed by primary sulfides and calcite probably correspond to wastes produced from the processing of ore coming mainly from pods within the skarn, and acid layers with abundant secondary minerals from material mined from chimneys and mantos. The presence of calcite influences speciation, neutralizes acid mine drainage (AMD), and decreases the mobility of most toxic metals and metalloids (TMMs). However, a hard-pan layer was not observed in the studied profiles. Retention of TMM within tailings probably occurs through the formation of low solubility metal carbonates and from elevation of pH that promotes Fe hydroxides precipitation that may retain As, Sb and metals. Calcite occurrence promotes As, Cd, Cu, Fe, Zn, Pb, Cd and Cr retention, does not play a role on Tl and Ni mobilization, and increases Sb release.  相似文献   

12.
The purpose of this work is to characterize the hydrochemical behavior of acid mine drainages (AMD) and superficial waters from the Adoria mine area (Northern Portugal). Samples of superficial and mine drainage water were collected for one year, bi-monthly, with pH, temperature, Eh, conductivity and HCO3 determined in situ with chemical analyses of SO4, Ca, K, Mg, Na, Cl, Ag, As, Bi, Co, Cu, Fe, Mn, Ni, Pb, Zn and Cd. In the mine, there are acidic waters, with low pH and significant concentrations of SO4, and metals (Fe, Mn, Zn, Cu, Pb, Cd and Ni), while in the superficial natural stream waters outside the mine, the pH is close to neutral, with low conductivity and lower metal concentrations. The stream waters inside the mine influence are intermediate in composition between AMD and natural stream waters outside the mine influence. Principal Component Analysis (PCA) shows a clear separation between AMD galleries and AMD tailings, with tailings having a greater level of contamination.  相似文献   

13.
Batch experiments were conducted to investigate As mobilization from mine tailings in the presence of a biosurfactant (JBR425, mixed rhamnolipids) and to evaluate the feasibility of using biosurfactant in remediating As contaminated mine tailings/soils. Introduction of the biosurfactant increased As mobilization greatly. When the mass ratio was 10 mg biosurfactant/g mine tailings at pH 11, As mobilization by the biosurfactant was greatest after 24 h, with a corresponding concentration ratio (the ratio of As mobilization by the biosurfactant to that by distilled water at same adjusted pH, wt/wt) of 21.6. Selective sequential extraction indicated that As was easily mobilized from the weakly bound and relatively more mobile fractions by washing with the biosurfactant. A mobilization isotherm was developed to predict As mobilization from the mine tailings in the presence of biosurfactant. It was shown that biosurfactant sorption to the mine tailings is essential for As mobilization. Arsenic mobilization was found to be positively correlated with the mobilization of Fe and other metals (i.e., Cu, Pb and Zn), which might further enhance As mobilization by helping incorporate it into soluble complexes or micelles. Capillary electrophoresis analyses indicated that As redox or methylation reactions had insignificant effect on As mobilization. Biosurfactants might be used potentially to remove bulk As from mine tailings or contaminated soils under alkaline conditions.  相似文献   

14.
碳酸盐型尾矿在缓冲期/中性矿山废水(NMD)释放期的重金属污染问题易被忽视。本文以广西大厂锡石-硫化物尾矿作为研究对象,采用柱淋滤实验方法,探讨碳酸盐型尾矿在缓冲期重金属的释放机制,为此类型尾矿重金属污染的防治提供依据。实验结果表明,大厂尾矿在缓冲期(约7年,pH值为6. 6～8. 0)存在Sb、Zn、Cd、As(Pb)释放污染问题。在尾矿堆放初期(0. 5年,pH值由7. 6降至7. 2),Zn、Sb、Cd快速、大量释出;中期(0. 5～2. 5年,pH值由7. 2波动升高至8. 0),Sb较平稳释出;后期(2. 5～7年,pH值变化范围为8. 0～6. 6,呈降低趋势),受气温及pH值影响,As、Sb(Pb)呈波动或间歇振荡释出,即在夏季高温、pH值较高时,释出元素浓度较高,反之,在冬季低温、pH值较低时,释出元素浓度较低。重金属的释放与尾矿中硫化物的氧化程度高低及氧化先后顺序有关。这些矿物的氧化顺序大致为:闪锌矿(Zn、Cd)、辉锑锡铅矿(Sb)→脆硫锑铅矿(Sb)→毒砂(As)、方铅矿(Pb)。因此,对于(广西大厂)碳酸盐型尾矿在缓冲期的重金属污染应分阶段、季节(夏季),采取有针对性的防治措施;在缓冲期(7年)后应注意尾矿酸性矿山废水(AMD)+重金属(如As、Sb)复合污染的防治。  相似文献   

15.
《Applied Geochemistry》2001,16(11-12):1369-1375
The heavy metal contamination of soils and waters by metalliferous mining activities in an area of Korea was studied. In the study area of the Imcheon Au–Ag mine, soils and waters were sampled and analyzed using AAS for Cd, Cu, Pb and Zn. Analysis of HCO3−, F−, NO3− and SO42− in water samples was also undertaken by ion chromatography. Elevated concentrations of the metals were found in tailings. The maximum contents in the tailings were 9.4, 229, 6160 and 1640 mg/kg extracted by aqua regia and 1.35, 26.4, 70.3 and 410 mg/kg extracted by 0.1 N HCl solution for Cd, Cu, Pb and Zn, respectively. These metals are continuously dispersed downstream and downslope from the tailings by clastic movement through wind and water. Because of the existence of sulfides in the tailings, a water sample taken on the tailings site was very acidic with a pH of 2.2, with high total dissolved solids (TDS) of 1845 mg/l and electric conductivity (EC) of 3820 μS/cm. This sample also contained up to 0.27, 1.90, 2.80, 53.4, 4,700 mg/l of Cd, Cu, Pb, Zn and SO42−, respectively. TDS, EC and concentrations of metals in waters decreased with distance from the tailings. The total amount of pulverized limestone needed for neutralizing the acid tailings was estimated to be 46 metric tons, assuming its volume of 45,000 m3 and its bulk density of 1855 kg/m3.  相似文献   

16.
Three types of smelting slags originating from historically different smelting technologies in the Tsumeb area (Namibia) were studied: (i) slags from processing of carbonate/oxide ore in a Cu–Pb smelter (1907–1948), (ii) slags from Cu and Pb smelting of sulphide ores (1963–1970) and (iii) granulated Cu smelting slags (1980–2000). Bulk chemical analyses of slags were combined with detailed mineralogical investigation using X-ray diffraction analysis (XRD), scanning electron microscopy (SEM/EDS) and electron microprobe (EPMA). The slags are significantly enriched in metals and metalloids: Pb (0.97–18.4 wt.%), Cu (0.49–12.2 wt.%), Zn (2.82–12.09 wt.%), Cd (12–6940 mg/kg), As (930–75,870 mg/kg) and Sb (67–2175 mg/kg). Slags from the oldest technology are composed of primary Ca- and Pb-bearing feldspars, spinels, complex Cu–Fe and Cu–Cr oxides, delafossite–mcconnellite phases and Ca–Pb arsenates. The presence of arsenates indicates that these slags underwent long-term alteration. More recent slags are composed of high-temperature phases: Ca–Fe alumosilicates (olivine, melilite), Pb- and Zn-rich glass, spinel oxides and small sulphide/metallic inclusions embedded in glass. XRD and SEM/EDS were used to study secondary alteration products developed on the surface of slags exposed for decades to weathering on the dumps. Highly soluble complex Cu–Pb–(Ca) arsenates (bayldonite, lammerite, olivenite, lavendulan) associated with litharge and hydrocerussite were detected. To determine the mineralogical and geochemical parameters governing the release of inorganic contaminants from slags, two standardized short-term batch leaching tests (European norm EN 12457 and USEPA TCLP), coupled with speciation-solubility modelling using PHREEQC-2 were performed. Arsenic in the leachate exceeded the EU regulatory limit for hazardous waste materials (2.5 mg/L). The toxicity limits defined by USEPA for the TCLP test were exceeded for Cd, Pb and As. The PHREEQC-2 calculation predicted that complex arsenates are the most important solubility controls for metals and metalloids. Furthermore, these phases can readily dissolve during the rainy season (October to March) and flush significant amounts of As, Pb and Cu into the environment in the vicinity of slag dumps.  相似文献   

17.
Several abandoned Cu mines are located along the shore of Prince William Sound, AK, where the effect of mining-related discharge upon shoreline ecosystems is unknown. To determine the magnitude of this effect at the former Beatson mine, the largest Cu mine in the region and a Besshi-type massive sulfide ore deposit, trace metal concentration and flux were measured in surface run-off from remnant, mineralized workings and waste. Samples were collected from seepage waters; a remnant glory hole which is now a pit lake; a braided stream draining an area of mineralized rock, underground mine workings, and waste piles; and a background location upstream of the mine workings and mineralized rock. In the background stream pH averaged ∼7.3, specific conductivity (SC) was ∼40 μS/cm, and the aqueous components indicative of sulfide mineral weathering, SO4 and trace metals, were at detection limits or lower. In the braided stream below the mine workings and waste piles, pH usually varied from 6.7 to 7.1, SC varied from 40 to 120 μS/cm, SO4 had maximum concentrations of 32 mg/L, and the trace metals Cu, Ni, Pb, and Zn showed maximum total acid extractable concentrations of 186, 5.9, 6.2 and 343 μg/L, respectively.  相似文献   

18.
This study investigates the geochemical characteristics of the acid mine drainage discharged from the abandoned mine adits and tailing piles in the vicinity of the Lousal mine and evaluates the extent of pollution on water and on the stream sediments of the Corona stream. Atmospheric precipitation interacting with sulphide minerals in exposed tailings produces runoff water with pH values as low as 1.9–2.9 and high concentrations of (9,249–20,700 mg l−1), Fe (959–4,830 mg l−1) and Al (136–624 mg l−1). The acidic effluents and mixed stream water carry elevated Cu, Pb, Zn, Cd and As concentrations that exceed the water quality standards. However, the severity of contamination generally decreases 4 km downstream of the source due to mixing with fresh waters, which causes the dilution of dissolved toxic metals and neutralization of acidity. Some natural attenuation of the contaminants also occurs due to the general reduced solubility of most trace metals, which may be removed from solution, by either co-precipitation or adsorption to the iron and aluminium precipitates.  相似文献   

19.
Soil and water samples were collected from farmsteads and provincial towns across the provinces of La Pampa and San Juan in Argentina. Inductively coupled plasma mass spectrometry was used for the determination of iodine in water following addition of TMAH to 1% v/v and soils extracted with 5% TMAH. Iodine in agricultural soils was in the range of 1.3–20.9 mg/kg in La Pampa located in central Argentina and 0.1–10.5 mg/kg in San Juan located in the northwest Andean region of Argentina, compared to a worldwide mean of 2.6 mg/kg. Mean selenium concentrations for soils from both provinces were 0.3 mg/kg, compared to a worldwide mean of 0.4 mg/kg. The majority of soils were slightly alkaline at pH 6.7 to 8.8. The organic content of soils in La Pampa was 2.5–5.9% and in San Juan 0.1–2.3%, whilst, mobile water extractable soil-iodine was 1–18% for La Pampa and 2–42% for San Juan. No simple relationship observed for pH and organic content, but mobile iodine (%) was highest when organic content was low, higher for lower total iodine concentrations and generally highest at pH > 7.5. Water drawn for drinking or irrigation of a variety of crops and pasture was found to range from 52 to 395 µg/L iodine and 0.8 to 21.3 µg/L selenium in La Pampa and 16–95 µg/L iodine and 0.6 to 8.2 µg/L selenium in San Juan. The water samples were all slightly alkaline between pH 8 and 10. Water–iodine concentrations were highest at pH 7.8 to 8.8 and in groundwaters positively correlated with conductivity. Raw water entering water treatment works in La Pampa was reduced in iodine content from approximately 50 µg/L in raw water to 1 µg/L in treated drinking water, similar to levels observed in regions experiencing iodine deficiency.  相似文献   

20.
Concentrations of Pb and Zn, plant uptake of these metals, the influence of the plants’ growth on the physicochemical properties and metal concentrations in the tailings of an abandoned 300-year-old mine tailing dam in Zacatecas, Mexico were investigated. Tailings were found to be heavily contaminated, with average levels of 2621 ± 53 and 3827 ± 83 mg/kg for Pb and Zn, respectively (maximum concentrations of 8466 ± 116 and 12,475 ± 324 mg/kg, respectively), exceeding international standards. Though physico-chemical conditions (pH, conductivity, redox potential, moisture, organic matter, nitrate, nitrite, ammonium nitrogen, total nitrogen, phosphorus and sulfates) do not favor the development of vegetation, some plants have adapted to these adverse conditions. Moreover, there was a significant reduction of Pb and Zn concentration in the rhizosphere (between 10–78% for Pb and 18–62% for Zn, depending on plant species). Sporobolus airoides showed average biomass concentrations of 173 ± 2 and 313 ± 6 mg/kg, for Pb and Zn, respectively; which implies a risk for mobility and possible incorporation into the food chain. Barcleyanthus salicifolius, Asclepsias linaria and Cortaderia selloana on the other hand, showed average biomass concentrations of 28 ± 3 and 121 ± 5 mg/kg of Pb and Zn, respectively, thus representing a lower biomagnification risk. The effect of these plants to reduce metal concentrations in the rhizosphere, improve physico-chemical conditions in metal polluted substrates, but with limited metal accumulation in biomass, suggests that they can be evaluated for use in stabilizing metal polluted tailings.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号