首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 218 毫秒
1.
Smelting slags associated with base-metal vein deposits of the Sierra Almagrera area (SE Spain) show high concentrations of Ag (<5–180 ppm), As (12–750 ppm), Cu (45–183 ppm), Fe (3.2–29.8%), Pb (511–2150 ppm), Sb (22–620 ppm) and Zn (639–8600 ppm). The slags are mainly composed of quartz, fayalite, barite, melilite, celsian, pyrrhotite, magnetite, galena and Zn–Pb–Fe alloys. No glassy phases were detected. The following weathering-related secondary phases were found: jarosite–natrojarosite, cotunnite, cerussite, goethite, ferrihydrite, chalcanthite, copiapite, goslarite, halotrichite and szomolnokite. The weathering of slag dumps near the Mediterranean shoreline has contaminated the soils and groundwater, which has caused concentrations in groundwater to increase to 0.64 mg/L Cu, 40 mg/L Fe, 0.6 mg/L Mn, 7.6 mg/L Zn, 5.1 mg/L Pb and 19 μg/L As. The results of laboratory leach tests showed major solubilization of Al (0.89–12.6 mg/L), Cu (>2.0 mg/L), Fe (0.22–9.8 mg/L), Mn (0.85–40.2 mg/L), Ni (0.092–2.7 mg/L), Pb (>2.0 mg/L) and Zn (>2.5 mg/L), and mobilization of Ag (0.2–31 μg/L), As (5.2–31 μg/L), Cd (1.3–36.8 μg/L) and Hg (0.2–7 μg/L). The leachates were modeled using the numerical code PHREEQC. The results suggested the dissolution of fayalite, ferrihydrite, jarosite, pyrrhotite, goethite, anglesite, goslarite, chalcanthite and cotunnite. The presence of secondary phases in the slag dumps and contaminated soils may indicate the mobilization of metals and metalloids, and help to explain the sources of groundwater contamination.  相似文献   

2.
Despite its potential economic and environmental importance, the study of trace metals in supergene (secondary) Cu-sulfides has been seriously overlooked in the past decades. In this study, the concentration and mineralogical form of “invisible” precious metals (Ag, Au) and metalloids (As, Sb, Se, Te) in supergene digenite (Cu1.8S) from various Cu deposits in the Atacama Desert of northern Chile, the world’s premier Cu province, were determined in detail using a combination of microanalytical techniques. Secondary ion mass spectrometry (SIMS) and electron microprobe analyzer (EMPA) measurements reveal that, apart from hosting up to ∼11,000 ppm Ag, supergene digenite can incorporate up to part-per-million contents of Au (∼6 ppm) and associated metalloids such as As (∼300 ppm), Sb (∼60 ppm), Se (∼96 ppm) and Te (∼18 ppm). SIMS analyses of trace metals show that Ag and Au concentrations strongly correlate with As in supergene digenite, defining wedge-shaped zones in Ag-As and Au-As log-log spaces. SIMS depth profiling and high-resolution transmission electron microscopy (HRTEM) observations reveal that samples with anomalously high Ag/As (>∼30) and Au/As (>∼0.03) ratios plot above the wedge zones and contain nanoparticles of metallic Ag and Au, while samples with lower ratios contain Ag and Au that is structurally bound to the Cu-sulfide matrix. The Ag-Au-As relations reported in this study strongly suggest that the incorporation of precious metals in Cu-sulfides formed under supergene, low-temperature conditions respond to the incorporation of a minor component, in this case As. Therefore, As might play a significant role by increasing the solubility of Ag and Au in supergene digenite and controlling the formation and occurrence of Ag and Au nanoparticles. Considering the fact that processes of supergene enrichment in Cu deposits can be active from tens of millions of years (e.g. Atacama Desert), we conclude that supergene digenite may play a previously unforeseen role in scavenging precious metals from undersaturated (or locally slightly supersaturated) solutions in near-surface environments.  相似文献   

3.
Three types of smelting slags originating from historically different smelting technologies in the Tsumeb area (Namibia) were studied: (i) slags from processing of carbonate/oxide ore in a Cu–Pb smelter (1907–1948), (ii) slags from Cu and Pb smelting of sulphide ores (1963–1970) and (iii) granulated Cu smelting slags (1980–2000). Bulk chemical analyses of slags were combined with detailed mineralogical investigation using X-ray diffraction analysis (XRD), scanning electron microscopy (SEM/EDS) and electron microprobe (EPMA). The slags are significantly enriched in metals and metalloids: Pb (0.97–18.4 wt.%), Cu (0.49–12.2 wt.%), Zn (2.82–12.09 wt.%), Cd (12–6940 mg/kg), As (930–75,870 mg/kg) and Sb (67–2175 mg/kg). Slags from the oldest technology are composed of primary Ca- and Pb-bearing feldspars, spinels, complex Cu–Fe and Cu–Cr oxides, delafossite–mcconnellite phases and Ca–Pb arsenates. The presence of arsenates indicates that these slags underwent long-term alteration. More recent slags are composed of high-temperature phases: Ca–Fe alumosilicates (olivine, melilite), Pb- and Zn-rich glass, spinel oxides and small sulphide/metallic inclusions embedded in glass. XRD and SEM/EDS were used to study secondary alteration products developed on the surface of slags exposed for decades to weathering on the dumps. Highly soluble complex Cu–Pb–(Ca) arsenates (bayldonite, lammerite, olivenite, lavendulan) associated with litharge and hydrocerussite were detected. To determine the mineralogical and geochemical parameters governing the release of inorganic contaminants from slags, two standardized short-term batch leaching tests (European norm EN 12457 and USEPA TCLP), coupled with speciation-solubility modelling using PHREEQC-2 were performed. Arsenic in the leachate exceeded the EU regulatory limit for hazardous waste materials (2.5 mg/L). The toxicity limits defined by USEPA for the TCLP test were exceeded for Cd, Pb and As. The PHREEQC-2 calculation predicted that complex arsenates are the most important solubility controls for metals and metalloids. Furthermore, these phases can readily dissolve during the rainy season (October to March) and flush significant amounts of As, Pb and Cu into the environment in the vicinity of slag dumps.  相似文献   

4.
The Freiberg area in the Saxon Erzgebirge (Ore Mountains) represents one of the oldest mining districts in Germany. Argentiferous ore mineralizations with lead, zinc and copper are dominating in this region. Various waste products of mining can be found around Freiberg. In particular, the slags from ore smelting were and are regarded as unusable waste products. However, they preserve information on the smelting and weathering behaviour of slag, which makes them very useful sources of information for our purposes. To reconstruct the chemical processes during ore smelting, historical slag represents a most valuable archive. Therefore, the historical slag dump in Halsbach (Germany) was examined exemplarily for the Freiberg deposit. The slag was dumped approx. 400 years ago and is rich in lead. An interrelation between the slag and the metallurgical process applied can be made on the basis of chemical composition, appearance and microscopic results. The slags of the heap in Halsbach contain high concentrations of heavy metals (average contents in mg kg−1: Zn 40,000; Pb 10,000; Cu 1500; U 1000). Enrichments of heavy metals in the organic-rich soil horizons within the range of the dump foot (maximum contents in the A-horizon in mg kg−1: Zn 3719; Pb 9198; As 3017; Cu 963) imply a faint discharge of metals from the dump.  相似文献   

5.
The concentration and distribution of metals were studied in metallophytes, growing on and in the vicinity of Pb–Zn gossans, NW Queensland. The study investigated the accumulation of metals in plant species and assessed their potential use as indicators in geobotanical and biogeochemical prospecting and as metal excluders in mine site rehabilitation. Plant species colonising the gossans tolerate high concentrations of metals. Total mean metal concentrations of soils ranged from minima of 14 ppm Cu, 28 ppm Pb and 34 ppm Zn in background areas to maxima of 660 ppm Cu, 12000 ppm Pb and 2100 ppm Zn over mineralised soils. Over the gossans, the grass species Eriachne mucronata forma, Enneapogon lindleyanus and Paraneurachne muelleri replace the characteristic grass Triodia molesta where the soils have high Pb and Zn concentrations. Of the 16 plant species identified, 3 of them, Hybanthus aurantiacus, Clerodendrum tomentosum and Bulbostylis barbata, were confined to the gossan sites. B. barbata appears to be of particular use in geobotanical prospecting as it indicates base metal mineralisation in the region.  相似文献   

6.
The comparative behaviour of Ni, Cu and Zn in the system “mine tailings–ground water–plants” has been investigated at the Ni–Cu mine site operated by INCO Ltd. Thompson Operations, Thompson, Manitoba. Oxidation of sulphide minerals causes the release of metals from exposed tailings containing Ni ∼2000 ppm, Cu ∼150 ppm and Zn ∼100 ppm to the ground water, which contains 350 mg/L Ni, 0.007 mg/L Cu, and 1.6 mg/L Zn. The metal concentration in the ground water is affected by the relative proportions of sulfide minerals, the rate of oxidation of sulphide minerals (Ni-bearing pyrrhotite > sphalerite > chalcopyrite), and the affinity of the metals for secondary Fe-phases (Ni > Zn > Cu).  相似文献   

7.
This work reports, for the first time, the mineralogical and geochemical characteristics of the Cretaceous sedimentary kaolin deposits in the Red Sea area, Egypt and sheds the light on their source. Mineralogical and geochemical analyses of both bulk deposits and the sand and clay fractions of these deposits indicated that they are composed of kaolinite (average of 75 wt.%) and quartz (average of 22 wt.%). Traces of anatase (average of 1 wt.%) were identified in all kaolin samples, while traces of halite (average of 2 wt.%) and hematite (average of 1 wt.%) were reported in the majority of the analyzed samples. The clay fractions show relatively high contents of TiO2 (average of 2.1%), Ni (average of 103 ppm), Nb (average of 98 ppm), Y (average of 67 ppm), and Zr (average of 630 ppm). Sum of the rare earth elements (ΣREE) in the clay fractions varies between 193 and 352 ppm. Chondrite-normalized REE patterns show enrichment of the light REE relative to the heavy REE ((La/Yb)N = 9) and negative Eu anomaly (Eu*/Eu = 0.67).  相似文献   

8.
Big sagebrush — a cold-desert species that dominates the terrain over large parts of western United States — was sampled along several traverses that crossed thermally metamorphosed limestone, phyllitic shale, and schist of the Middle and Upper Cambrian Preble Formation that host skarn-, disseminated gold and silver-, and hot springs gold-type mineral occurrences. Patterns of detectable levels of gold (8 to 28 ppb or ng g−1) in ash of new growth were consistent with areas affected by known or suspected gold mineralization. Soils collected along one of the traverses where a selenium-indicator plant was common contained no gold above background levels of 2ppb, but were consistently high in As, Sb, and Zn, and several samples were unusually high in Se (maximum 11 ppm or μg g−1). Sagebrush along this traverse contained Li at levels above norms for this species. We also found a puzzling geochemical anomaly at a site basinward from active hot springs along a range-front fault scarp. Sagebrush at this site contained a trace of gold and an unusually high concentration of Cd (13 ppm) and the soil had anomalous concentrations of Cd and Bi (3.2 and 6 ppm, respectively). The source of this anomaly could be either metal-rich waters from an irrigation ditch or leakage along a buried fault. Despite the limited nature of the study, we conclude that gold in sagebrush could be a cost-effective guide to drilling locations in areas where the geology seems favorable for disseminated and vein precious metals.  相似文献   

9.
Anomalous concentrations of Cr(VI) occur in groundwaters of the Adamantina Aquifer, in a large region in the western state of São Paulo, sometimes exceeding the potability limit (0.05 mg L−1). To identify the possible geochemical reactions responsible for the occurrence of Cr in groundwater in Urânia, borehole rock samples were collected in order to carry out mineralogical and chemical analyses. In addition, multilevel monitoring wells were installed and groundwater samples were analyzed. Analyses of the borehole rock samples show the occurrence of a geochemical anomaly of Cr in the quartzose sandstones (average concentrations of 221 ppm). Chrome-diopside is one of the main minerals contributing to this anomaly, having an average Cr content of 1505 ppm. Sequential extraction experiments indicated weakly adsorbed Cr in the order of 0.54 ppm, and this quantity is enough to provide the Cr concentrations observed in groundwater. Groundwaters from the monitoring wells proved to be stratified, with the highest concentrations of Cr(VI) (0.13 mg L−1) being associated with high redox and pH values (over 10) and high concentrations of Na. Geochemical reactions that may explain the release of Cr from the solid phase to groundwater involve the release of Cr(III) from minerals (like chrome-diopside and Cr-Fe hydroxide), followed by oxidation of Cr(III) to Cr(VI), probably related to the reduction of Mn oxides present in the aquifer. Then cation exchange occurs and dissolution of carbonates which increases the pH of groundwater, resulting in the desorption and mobilization of Cr(VI) into groundwater.  相似文献   

10.
This paper revisits the utility of sodium (Na) content in aragonite and calcite mollusc shells as an indicator of palaeosalinity. The data come mainly from a related suite of Middle Pleistocene marine and freshwater fossils that have been subject to broadly similar diagenetic histories. Environmental salinity is re-affirmed as the primary factor in determining the sodium content of modern and ancient mollusc shells: values <2000 ppm Na are generally indicative of non-marine environments while values >2000 Na ppm are typically from marine shells. There is a positive relationship between Na (salinity) and Sr which is a helpful discriminator of palaeosalinity in the fossil data set. The Na and Sr data give confidence that the fossil shells have not suffered pervasive diagenetic alteration and that the marine fossils lived in fully marine conditions. Oxygen isotope values in the best-preserved, fully marine fossil shells, suggest Middle Pleistocene ‘eastern England’ seawater temperatures were broadly similar to those of the modern North Sea.  相似文献   

11.
Dissolved and particulate concentrations of metals (Fe, Al, Mn, Co, Ni, Cu, Zn, Cd, Tl, Pb) and As were monitored over a 5 year period in the Amous River downstream of its confluence with a creek severely affected by acid mine drainage (AMD) originating from a former Pb–Zn mine. Water pH ranged from 6.5 to 8.8. Metals were predominantly in dissolved form, except Fe and Pb, which were in particulate form. In the particulate phase, metals were generally associated with Al oxides, whereas As was linked to Fe oxides. Metal concentrations in the dissolved and/or particulate phase were generally higher during the wet season due to higher generation of AMD. Average dissolved (size < 0.22 μm) metal concentrations (μg/L) were 1 ± 4 (Fe), 69 ± 49 (Al), 140 ± 118 (Mn), 4 ± 3 Co, 6 ± 4 (Ni), 1.3 ± 0.8 (Cu), 126 ± 81 (Zn), 1.1 ± 0.7 (Cd), 0.9 ± 0.5 (Tl), 2 ± 3 (Pb). Dissolved As concentrations ranged from 5 to 134 μg/L (30 ± 23 μg/L). During the survey, the concentration of colloidal metals (5 kDa < size < 0.22 μm) was less than 25% of dissolved concentrations. Dissolved metal concentrations were generally higher than the maximum concentrations allowed in European surface waters for priority substances (Ni, Cd and Pb) and higher than the environmental quality standards for other compounds. Using Diffusion Gradient in Thin Film (DGT) probes, metals were shown to be in potentially bioavailable form. The concentrations in Leuciscus cephalus were below the maximum Pb and Cd concentrations allowed in fish muscle for human consumption by the European Water Directive. Amongst the elements studied, only As, Pb and Tl were shown to bioaccumulate in liver tissue (As, Pb) or otoliths (Tl). Bioaccumulation of metals or As was not detected in muscle.  相似文献   

12.
The dacite pumice erupted from Mt. Pinatubo on June 15, 1991 (whole-rock, rhyolitic groundmass glasses and homogenized melt inclusions) has been analyzed using inductively coupled plasma-mass spectrometry (ICP-MS), nanosecond and femtosecond laser ablation ICP-MS and secondary ion mass spectrometry (SIMS) to evaluate its ore-forming potential. Data suggest that adakite magmas are metal-rich and concentrate ore metals during magmatic differentiation. Sulfides segregate in limited amounts under the hydrous, oxidizing conditions typical of adakitic magmas resulting in incompatible behavior for Au (6-22 ppb), Cu (26-77 ppm), and Pb, Mo, As, and Sb in melts of dacitic to rhyolitic compositions. Metal transfer from this adakite magma to the coexisting aqueous phase was favored by the peraluminous composition of the rhyolitic melt and high aqueous chloride concentrations. Mass balance calculations suggest that the pre-eruptive aqueous phase could have extracted a minimum of 100 t Au and 5 × 105 t Cu from the Mt. Pinatubo magma. Our data suggest that intrusives having adakitic signatures are genetically associated with Au-Cu and Cu-Mo mineralization, auriferous porphyry copper deposits, and epithermal gold veins. High H2O, Cl, Sr/Y, Pb/Ce, Mo/Ce, As/Ce and Sb/Ce in Mt. Pinatubo melts reflect the contribution of deep fluids derived from subducted sediments and altered MORBs in the dacite genesis. The slab-derived fluids carrying mobile elements are likely responsible for the enrichment of adakite magmas in gold, associated metals and H2O, and may explain the exceptional ore-forming potential of adakite magmatism.  相似文献   

13.
  相似文献   

14.
The tectonic transition from Prototethys to Paleotethys orogeny in the East Kunlun orogenic belt is not completely clear, and is a major unresolved geologic issue in Northern Tibet Plateau. Here, we present zircon geochronology, whole-rock elemental and zircon Hf isotopic geochemistry for newly discovered mafic dykes in the East Kunlun orogenic belt, to provide constraints on this issue. The studied mafic dykes are hornblende gabbros, consisting of hornblende (60–65 vol.%), plagioclase (15–25 vol.%) and augite and biotite (0–5 vol.%). LA–ICP–MS zircon U–Pb dating shows that these mafic dykes were emplaced at about 393 Ma. All the mafic dykes are characterized by high contents of CaO (8.82–11.48 wt.%), MgO (9.07–11.39 wt.%), V (275–336 ppm), Cr (370–467 ppm) and Ni (78.3–120 ppm), with high Mg# (63–67), flat CI-normalized REE distribution and depleted ?Hf(t) values (2.03–5.35), showing tholeiitic affinities and geochemical characteristics similar to those of mid-ocean ridge basalts. They were derived from low degree (about 5–15%) partial melting of a fertile spinel lherzolite source, which have been metasomatized by fluids introduced to the mantle by former subducted slab. The geologic–petrologic evidence suggests that the mafic dykes were emplaced in a shift tectonic setting related to continental rifting, which was caused by the extensional collapse related to the lithospheric thinning after the Prototethys orogeny. The delamination-induced thermal disturbance and extensional decompression triggered partial melting of the mantle and the emplacement of the mafic dykes. Combined with previous work, we propose that the Middle Devonian mafic dykes may be the early magmatic response to the transition from Prototethys to Paleotethys marking the opening of the Paleotethys in the East Kunlun orogenic belt.  相似文献   

15.
The Nasirabad manganese occurrence is located to the south of the Neyriz in the Fars province. Structurally and lithologically, this occurrence lies in the southwest part of the Zagros Thrust Belt and was deposited as Mn-nodules and interconnected ore-bearing interlayer's with radiolarite cherts in the vicinity of the Neyriz ophiolites. The present work deals with the geology and geochemistry of the Nasirabad manganese occurrence with a discussion of its genesis. High Mn/Fe (average 18.85) and high Ba (average 28,830 ppm) with low Pb (2.0 ppm) and LREE > HREE, Lan/Ndn (average 4.5), Dyn/Ybn (average 1.2) and negative Eu anomaly suggest distal hydrothermal source. The Co/Zn (average 2.2), Ce/La ratio (average 0.67) and trace element discrimination diagrams indicate hydrothermal–hydrogenous processes. Y/Ho ratio (average 24.85) and strong positive correlation coefficient between major oxides and some high field strength elements (HFSE) like; TiO2 vs Fe2O3 (r = 0.98), Al2O3 vs Zr (r = 0.97), Al2O3 vs Fe2O3 (r = 0.98), Zr vs K2O (r = 0.98), Nb vs TiO2 (r = 0.92), Th vs Fe2O3 (r = 0.76), Th vs MgO (r = 0.86) reveal the presence of volcaniclastics and (or) terrigenous detritals of mafic composition being deposited into the depositional basin. It seems that intermittent interlayering of mafic detrital material derived from volcanic eruption of the Neyriz island arc directly affected the physicochemical conditions of hydrothermal ore precipitation in this basin and consequently the Nasirabad manganese ores represent hydrothermal–hydrogenous geochemical characteristics. The Nasirabad is an example of non-sulphidic, oxic Mn-mineralization. Similar trend between the enrichment and depletion of some bioessential elements (e.g., Mn, As, Ba, Sr, Co, Ce) might have been resulted from selective sequestering of metal ions by microbial processes and hence hydrogenous characteristics may also be the result of biogenetic processes. Moreover the high dilution of distal hydrothermal exhalations by sea water cannot be ruled out.  相似文献   

16.
We investigate the degassing of volatile heavy metals from natural basalt and dacite and synthetic rhyolite melts doped with Bi, Pb, Tl, Au, Re, Sb, Sn, Cd, Mo, As, Cu in Pt capsules over a range of temperatures (1200-1430 °C) exposed to air at 0.1 MPa. We also investigated the effects of ligands on degassing by adding known concentrations of Cl and S. During the experiments concentration gradients normal to the melt/gas interface arose for the trace metals Au, Tl, As, Cd, Re, Bi and Pb, as shown by measurements by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) on the quenched glasses. In contrast, erratic concentration gradients occurred for Cu, Mo, Sn, Sb due to the development of compositional cords in the glass for those elements. The diffusivities for Au, Tl, As, Cd, Re, Bi and Pb (in decreasing order of volatility) followed an Arrhenius relationship with log D at 1260 °C varying from −12 to −17. The addition of Cl and S were shown to increase by two-to five-fold the volatilities of all metals, with S having a more profound effect. Diffusivities from the experiments were applied in a bubble growth model to examine the behavior of Tl and Pb in volcanic gases. The Tl/Pb ratio in gases shows much greater variation than can be explained by partitioning and magma composition alone, with diffusion serving to drastically enrich or deplete the Tl/Pb of gases to values significantly different from that of the melt.  相似文献   

17.
The conventional model of leaching volcanic rocks as a source of metals in a seafloor hydrothermal systems has been tested by examining the behavior of Pb and other trace elements during hydrothermal alteration. ODP Leg 193 drill sites 1188 (Snowcap) and 1189 (Roman Ruins) on Pual Ridge in the eastern Manus Basin offshore eastern Papua New Guinea provide a unique three-dimensional window into an active back-arc hydrothermal system. We investigate by means of a LA-ICP-MS microbeam technique the capacity of Pb to be leached from a host volcanic rock exposed to various types and intensities of alteration. Our results are in general agreement with previous studies that utilized bulk analytical techniques but provide a more detailed explanation of the processes.Fresh representative dacitic lavas from the Pual Ridge have an average whole rock Pb content of 5.2 ppm, an average interstitial glass Pb content of 5.6 ppm and an average plagioclase Pb content of 1.0 ppm. Altered matrix samples have highly variable Pb values ranging from 0 to 52.4 ppm. High Pb values in altered samples are associated with a low temperature chlorite and clay mineral assemblage, in some cases overprinted by a high temperature (up to 350 °C) silica-rich “bleaching” alteration. Only the most highly altered matrix samples have REE patterns that differ from the fresh Pual Ridge dacite. This may represent either different lava histories or alteration characteristics that have affected normally immobile REEs. Altered samples with the highest Pb values have similar REE patterns to those of the local unaltered lavas. They are compositionally similar to typical Pual Ridge dacites indicating a genetic relationship between the main regional volcanic suite and the subseafloor hydrothermally altered, Pb-enriched material.Relative loss/gain for Pb between the analyzed altered samples and a calculated precursor show a maximum relative gain of 901%. Samples with relative Pb gain from both drill sites are associated with lower temperature alteration mineral assemblages characterized by pervasive chloritization. The related lower temperature (220-250 °C) neutral to slightly acidic fluids have been ascribed by others to return circulation of hydrothermal fluids that did not interact with seawater. Because altered samples have a higher Pb content than the fresh precursor, leaching of fresh volcanic rocks cannot be the source of Pb in the hydrothermal systems.  相似文献   

18.
This article investigates the relationship between soil Cd, Cu, Pb and Zn contaminants and the location and activities of the Pb–Zn–Ag and Cu mines at Mount Isa, Queensland, Australia. Analysis of the data focuses primarily on soil Pb distributions and concentrations because of their potential impact on children’s health. The Xstrata Mount Isa Mines lease (XMIM) is Australia’s leading emitter of numerous contaminants to the environment, including Cu and Pb, and the mining-related activities have been linked causally to the findings of a 2008 study that showed 11.3% of local children (12–60 months) have blood Pb levels >10 μg/dL. Queensland government authorities and Xstrata Mount Isa Mines Pty Ltd maintain that contaminants within environmental systems around Mount Isa are largely the result of near-surface mineralization. The evidence for whether the contamination is derived from XMIM or other possible sources, such as the natural weathering of ore-rich bedrock, is investigated using data from surface and subsurface soil chemistry, atmospheric modelling of metal contaminants from mining and smelting operations and local geological and associated geochemical studies. Sixty surface soil samples collected from sites adjacent to houses, parks and schools throughout Mount Isa city were analyzed for their total extractable Cd, Cu, Pb and Zn concentrations in the <2 mm to >180 μm (coarser) and <180 μm (finer) grain size fractions. Concentrations in the finer size fraction reveal a range of values: Cd – 0.7–12.5 ppm; Cu – 31–12,100 ppm; Pb – 8–5770 ppm; Zn – 26–11,100 ppm, with several samples exceeding Australian residential health investigation guidelines. Spatial analysis shows that surface soil metal concentrations are significantly higher within 2 km of XMIM compared to more distant samples, and that more than 1000 property lots are at risk of having detrimentally high soil Pb levels. Determination of metal concentrations in 49 samples from eight soil pits shows that surface samples (0–2 cm) are enriched significantly relative to those at depth (10–20 cm), suggesting an atmospheric depositional origin. AUSPLUME air dispersal modelling of Pb originating from the Cu and Pb smelter stacks and mine site fugitive sources confirms that Pb is deposited across the urban area, during periods of the year (∼20%/a) when the wind blows from the direction of XMIM towards the urban area and disperses dusts from the uncovered spoil and road surfaces, as well as from stack emission sources. Although there are some spatially restricted outcrops of Pb close to the surface in parts of the urban area, the Cu-ore body is ∼244 m below the surface. However, enriched and significantly correlated surface soil concentrations of Cu and Pb (Pearson correlation 0.879, p = 0.000) in and around the urban area of Mount Isa can only be explained by atmospheric transport and deposition of metals from the adjoining mining and smelting operations. The results from this study provide unequivocal evidence that both historic and ongoing emissions from XMIM are contaminating the urban environment. Given the ongoing Pb poisoning issues in Mount Isa children, it is clear that remediation, reductions in mine emissions and more stringent regulatory actions are warranted.  相似文献   

19.
The abandoned Sb deposit Pezinok in Slovakia is a significant source of As and Sb pollution that can be traced in the upper horizons of soils kilometers downstream. The source of the metalloids are two tailing impoundments which hold ∼380,000 m3 of mining waste. The tailings and the discharged water have circumneutral pH values (7.0 ± 0.6) because the acidity generated by the decomposition of the primary sulfides (pyrite, FeS2; arsenopyrite, FeAsS; berthierite, FeSb2S4) is rapidly neutralized by the abundant carbonates. The weathering rims on the primary sulfides are iron oxides which act as very efficient scavengers of As and Sb (with up to 19.2 wt% As and 23.7 wt% Sb). In-situ μ-XANES experiments indicate that As in the weathering rims is fully oxidized (As5+). The pore solutions in the impoundment body contain up to 81 ppm As and 2.5 ppm Sb. Once these solutions are discharged from the impoundments, they precipitate or deposit masses of As-rich hydrous ferric oxide (As-HFO) with up to 28.3 wt% As2O5 and 2.7 wt% Sb. All As-HFO samples are amorphous to X-rays. They contain Fe and As in their highest oxidation state and in octahedral and tetrahedral coordination, respectively, as suggested by XANES and EXAFS studies on Fe K and As K edges. The iron octahedra in the As-HFO share edges to form short single chains and the chains polymerize by sharing edges or corners with the adjacent units. The arsenate ions attach to the chains in a bidentate-binuclear and monodentate fashion. In addition, hydrogen-bonded complexes may exist to satisfy the bonding requirements of all oxygen atoms in the first coordination sphere of As5+. Structural changes in the As-HFO samples were traced by chemical analyses and Fe EXAFS spectroscopy during an ageing experiment. As the samples age, As becomes more easily leachable. EXAFS spectra show a discernible trend of increasing number of Fe-Fe pairs at a distance of 3.3-3.5 Å, that is, increasing polymerization of the iron octahedra to form larger units with fewer adsorption sites. Therefore, although ferrihydrite is an excellent material for capturing arsenic, its use as a medium for a long-term storage of As has to be considered with a great caution because it will tend to release arsenic as it ages.  相似文献   

20.
In this study the physico-chemical, titration and sorption characteristics of Na-illite du Puy (Na-illite) have been measured and modelled. Samples of illite, collected in the region of le Puy-en-Velay, France, were purified and conditioned to the Na-form and physico-chemically characterised. Potentiometric titrations on suspensions of the Na-illite were carried out using a batch backtitration technique in 0.01, 0.1 and 0.5 M NaClO4 background electrolytes from pH∼3 to ∼11.5 in an inert atmosphere glove box. The supernatant solutions from each titration experiment in each series were analysed for K, Mg, Ca, Sr, Si, Al, Fe and Mn. The titration data were modelled in terms of the protolysis of two amphoteric edge sites (SW1OH and SW2OH) without an electrostatic term. Sorption edges (solid/liquid distribution ratios versus pH at trace sorbate concentrations and constant ionic strength) were determined for the transitions metals Ni(II) and Co(II), the lanthanide Eu(III), and the heavy metal Sn(IV) on Na-illite with NaClO4 as the background electrolyte under anoxic conditions (CO2 ? 2 ppm, O2 ? 2 ppm). The study thus encompasses a broad range of metals with different thermodynamic characteristics and with valence states ranging from II to IV. The results from the modelling of the titration data, in combination with a non electrostatic surface complexation and cation exchange sorption model were applied to quantitatively describe the uptake characteristics of the metals listed above on Na-illite. Since sorption edges were measured at trace concentrations, metal uptake was modelled as occurring on strong type sites (SSOH) only. This sorption model, the two site protolysis non electrostatic surface complexation and cation exchange model (2SPNE SC/CE model) had been previously developed and used to describe metal uptake on montmorillonite.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号