首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 79 毫秒
1.
The efficiency and sustainability of carbon dioxide (CO2) storage in deep geological formations crucially depends on the integrity of the overlying cap-rocks. Existing oil and gas wells, which penetrate the formations, are potential leakage pathways. This problem has been discussed in the literature, and a number of investigations using semi-analytical mathematical approaches have been carried out by other authors to quantify leakage rates. The semi-analytical results are based on a number of simplifying assumptions. Thus, it is of great interest to assess the influence of these assumptions. We use a numerical model to compare the results with those of the semi-analytical model. Then we ease the simplifying restrictions and include more complex thermodynamic processes including sub- and supercritical fluid properties of CO2 and non-isothermal as well as compositional effects. The aim is to set up problem-oriented benchmark examples that allow a comparison of different modeling approaches to the problem of CO2 leakage.  相似文献   

2.
Amine post-combustion carbon capture technology is based on washing the flue gas with a solvent that captures CO2. Thus, a small fraction of this solvent can be released together with the cleaned flue gas. This release may cause environmental concerns, both directly and indirectly through subsequent solvent degradation into other substances in the atmosphere. The paper presents the ammonia emission from CO2 capture pilot plant (1 tonne CO2 per day) using 40 wt% aminoethylethanolamine solvent, along with the efficiency of the water wash unit. In addition, the temperature effect of lean amine entering the absorber on ammonia emission was studied. Furthermore, the concentrations of other compounds such as SO2, SO3, NO2, CS2 and formaldehyde were monitored. The literature review on the NH3 emission from a pilot plant using aminoethylethanolamine solvent has not been published. The results show that the main source of ammonia emission is the absorber and that emission (in the range 27–50 ppm) corresponds to typical NH3 release from CO2 capture pilot plant using an amine solvent. The emission of amines and amine degradation products is a complex phenomenon which is difficult to predict in novel solvents, and for this reason the significance of new solvents testing in a pilot scale has been highlighted.  相似文献   

3.
Technology of CO2 capture and sequestration (CCS) is one of the many solutions to reduce greenhouse gases and alleviate the current global warming, but its security is important and needs to be evaluated. A simulator which links TOUGHREACT and FLAC3D was used to simulate the process of coupled temperature-hydrologic-mechanics (THM) in CCS. A test on laboratory scale was set up and water was injected into compacted sand covered by low permeability clay to study the land uplift displacement. The results were used to verify the accuracy of the simulator for calculating the THM coupling. The effects of injection quantity, injection time, and injection mode on land uplift were also studied on the constructed model. At last, a land uplift evaluation system was built to quantify the CO2 escape if any. The evaluation process can be divided into five steps: model generalization, acquisition of model parameters, numerical modeling, simulation and analysis, monitor comparison, and evaluation of model results. The major output of this study will provide a feasible method for quantitative analysis of CO2 leakage in CCS projects.  相似文献   

4.
Carbon dioxide capture and storage (CCS) in sub-seabed geological formations is currently being studied as a potential option to mitigate the accumulation of anthropogenic CO2 in the atmosphere. To investigate the validity of CO2 storage in the sub-seafloor, development of techniques to detect and monitor CO2 leaked from the seafloor is vital. Seafloor-based acoustic tomography is a technique that can be used to observe emissions of liquid CO2 or CO2 gas bubbles from the seafloor. By deploying a number of acoustic tomography units in a seabed area used for CCS, CO2 leakage from the seafloor can be monitored. In addition, an in situ pH/pCO2 sensor can take rapid and high-precision measurements in seawater, and is, therefore, able to detect pH and pCO2 changes due to the leaked CO2. The pH sensor uses a solid-state pH electrode and reference electrode instead of a glass electrode, and is sealed within a gas permeable membrane filled with an inner solution. Thus, by installing a pH/pCO2 sensor onto an autonomous underwater vehicle (AUV), an automated observation technology is realized that can detect and monitor CO2 leakage from the seafloor. Furthermore, by towing a multi-layer monitoring system (a number of pH/pCO2 sensors and transponders) behind the AUV, the dispersion of leaked CO2 in a CCS area can also be observed. Finally, an automatic elevator can observe the time-series dispersion of leaked CO2. The seafloor-mounted automatic elevator consists of a buoy equipped with pH/pCO2 and depth sensors, and uses an Eulerian method to collect spatially continuous data as it ascends and descends.Hence, CO2 leakage from the seafloor is detected and monitored as follows. Step 1: monitor CO2 leakage by seafloor-based acoustic tomography. Step 2: conduct mapping survey of the leakage point by using the pH/pCO2 sensor installed in the AUV. Step 3: observe the impacted area by using a remotely operated underwater vehicle or the automatic elevator, or by towing the multi-layer monitoring system.  相似文献   

5.
The presence of a gassy ground condition is an important problem in tunneling. In this study, the effects of groundwater H2S and CH4 emissions are investigated and characterized together with the factors that created these conditions in Nosoud tunnel in Iran. Through the geological investigations, the presence of these gasses was not detected prior to the construction of the tunnel. Groundwater sampling indicated that about 1 L of H2S is released per 100 L of the water inflow into the Nosoud tunnel under normal conditions. However, the volume of the released gas was varying with the changes in the groundwater discharge rate. Thus, estimation of groundwater inflow into the tunnel is necessary for predicting the volume of gas emission. Based on the experience of the Nosoud tunnel excavations, there are several geological and hydrogeological factors that must be considered as the indicators of gas emissions during tunneling. Considering the importance of ground water gas emission into the tunnels located in gassy conditions, the present work was conducted to predict the H2S seepage before the excavation using geological and hydrogeological indicators.  相似文献   

6.
The Ketzin pilot site, led by the GFZ German Research Centre for Geosciences, is Europe??s longest-operating on-shore CO2 storage site with the aim of increasing the understanding of geological storage of CO2 in saline aquifers. Located near Berlin, the Ketzin pilot site is an in situ laboratory for CO2 storage in an anticlinal structure in the Northeast German Basin. Starting research within the framework of the EU project CO2SINK in 2004, Ketzin is Germany??s first CO2 storage site and fully in use since the injection began in June 2008. After 39?months of operation, about 53,000 tonnes of CO2 have been stored in 630?C650?m deep sandstone units of the Upper Triassic Stuttgart Formation. An extensive monitoring program integrates geological, geophysical and geochemical investigations at Ketzin for a comprehensive characterization of the reservoir and the CO2 migration at various scales. Integrating a unique field and laboratory data set, both static geological modeling and dynamic simulations are regularly updated. The Ketzin project successfully demonstrates CO2 storage in a saline aquifer on a research scale. The results of monitoring and modeling can be summarized as follows: (1) Since the start of the CO2 injection in June 2008, the operation has been running reliably and safely. (2) Downhole pressure data prove correlation between the injection rate and the reservoir pressure and indicates the presence of an overall dynamic equilibrium within the reservoir. (3) The extensive geochemical and geophysical monitoring program is capable of detecting CO2 on different scales and gives no indication for any leakage. (4) Numerical simulations (history matching) are in good agreement with the monitoring results.  相似文献   

7.
CO2 geological storage is a transitional technology for the mitigation of climate change. In the vicinity of potential CO2 reservoirs in Hungary, protected freshwater aquifers used for drinking water supplies exist. Effects of disaster events of CO2 escape and brine displacement to one of these aquifers have been studied by kinetic 1D reactive transport modelling in PHREEQC. Besides verifying that ion concentrations in the freshwater may increase up to drinking water limit values in both scenarios (CO2 or brine leakage), total porosity of the rock is estimated. Pore volume is expected to increase at the entry point of CO2 and to decrease at further distances, whereas it shows minor increase along the flow path for the effect of brine inflow. Additionally, electrical conductivity of water is estimated and suggested to be the best parameter to measure for cost-effective monitoring of both worst-case leakage scenarios.  相似文献   

8.
Careful site characterization is critical for successful geologic storage of carbon dioxide (CO2) because of the many physical and chemical processes impacting CO2 movement and containment under field conditions. Traditional site characterization techniques such as geological mapping, geophysical imaging, well logging, core analyses, and hydraulic well testing provide the basis for judging whether or not a site is suitable for CO2 storage. However, only through the injection and monitoring of CO2 itself can the coupling between buoyancy flow, geologic heterogeneity, and history-dependent multi-phase flow effects be observed and quantified. CO2 injection and monitoring can therefore provide a valuable addition to the site-characterization process. Additionally, careful monitoring and verification of CO2 plume development during the early stages of commercial operation should be performed to assess storage potential and demonstrate permanence. The Frio brine pilot, a research project located in Dayton, Texas (USA) is used as a case study to illustrate the concept of an iterative sequence in which traditional site characterization is used to prepare for CO2 injection and then CO2 injection itself is used to further site-characterization efforts, constrain geologic storage potential, and validate understanding of geochemical and hydrological processes. At the Frio brine pilot, in addition to traditional site-characterization techniques, CO2 movement in the subsurface is monitored by sampling fluid at an observation well, running CO2-saturation-sensitive well logs periodically in both injection and observation wells, imaging with crosswell seismic in the plane between the injection and observation wells, and obtaining vertical seismic profiles to monitor the CO2 plume as it migrates beyond the immediate vicinity of the wells. Numerical modeling plays a central role in integrating geological, geophysical, and hydrological field observations.  相似文献   

9.
《地学前缘(英文版)》2020,11(6):2309-2321
Carbon capture and storage (CCS) has been proposed as a potential technology to mitigate climate change. However, there is currently a huge gap between the current global deployment of this technology and that which will be ultimately required. Whilst CO2 can be captured at any geographic location, storage of CO2 will be constrained by the geological storage potential in the area the CO2 is captured. The geological storage potential can be evaluated at a very high level according to the tectonic setting of the target area. To date, CCS deployment has been restricted to more favourable tectonic settings, such as extensional passive margin and post-rift basins and compressional foreland basins. However, to reach the adequate level of deployment, the potential for CCS of regions in different tectonic settings needs to be explored and assessed worldwide. Surprisingly, the potential of compressional basins for carbon storage has not been universally evaluated according to the global and regional carbon emission distribution. Here, we present an integrated source-to-sink analysis tool that combines comprehensive, open-access information on basin distribution, hydrocarbon resources and CO2 emissions based on geographical information systems (GIS). Compressional settings host some of the most significant hydrocarbon-bearing basins and 36% of inland CO2 emissions but, to date, large-scale CCS facilities in compressional basins are concentrated in North America and the Middle East only. Our source-to-sink tool allows identifying five high-priority regions for prospective CCS development in compressional basins: North America, north-western South America, south-eastern Europe, the western Middle East and western China. We present a study of the characteristics of these areas in terms of CO2 emissions and CO2 storage potential. Additionally, we conduct a detailed case-study analysis of the Sichuan Basin (China), one of the compressional basins with the greatest CO2 storage potential. Our results indicate that compressional basins will have to play a critical role in the future of CCS if this technology is to be implemented worldwide.  相似文献   

10.
A screening and ranking framework (SRF) has been developed to evaluate potential geologic carbon dioxide (CO2) storage sites on the basis of health, safety, and environmental (HSE) risk arising from CO2 leakage. The approach is based on the assumption that CO2 leakage risk is dependent on three basic characteristics of a geologic CO2 storage site: (1) the potential for primary containment by the target formation; (2) the potential for secondary containment if the primary formation leaks; and (3) the potential for attenuation and dispersion of leaking CO2 if the primary formation leaks and secondary containment fails. The framework is implemented in a spreadsheet in which users enter numerical scores representing expert opinions or published information along with estimates of uncertainty. Applications to three sites in California demonstrate the approach. Refinements and extensions are possible through the use of more detailed data or model results in place of property proxies.  相似文献   

11.
A field facility located in Bozeman, Montana provides the opportunity to test methods to detect, locate, and quantify potential CO2 leakage from geologic storage sites. From 9 July to 7 August 2008, 0.3 t CO2 day−1 were injected from a 100-m long, ~2.5-m deep horizontal well. Repeated measurements of soil CO2 fluxes on a grid characterized the spatio-temporal evolution of the surface leakage signal and quantified the surface leakage rate. Infrared CO2 concentration sensors installed in the soil at 30 cm depth at 0–10 m from the well and at 4 cm above the ground at 0 and 5 m from the well recorded surface breakthrough of CO2 leakage and migration of CO2 leakage through the soil. Temporal variations in CO2 concentrations were correlated with atmospheric and soil temperature, wind speed, atmospheric pressure, rainfall, and CO2 injection rate.  相似文献   

12.
Practical geologic CO2 sequestration will require long-term monitoring for detection of possible leakage back into the atmosphere. One potential monitoring method is multi-spectral imaging of vegetation reflectance to detect leakage through CO2-induced plant stress. A multi-spectral imaging system was used to simultaneously record green, red, and near-infrared (NIR) images with a real-time reflectance calibration from a 3-m tall platform, viewing vegetation near shallow subsurface CO2 releases during summers 2007 and 2008 at the Zero Emissions Research and Technology field site in Bozeman, Montana. Regression analysis of the band reflectances and the Normalized Difference Vegetation Index with time shows significant correlation with distance from the CO2 well, indicating the viability of this method to monitor for CO2 leakage. The 2007 data show rapid plant vigor degradation at high CO2 levels next to the well and slight nourishment at lower, but above-background CO2 concentrations. Results from the second year also show that the stress response of vegetation is strongly linked to the CO2 sink–source relationship and vegetation density. The data also show short-term effects of rain and hail. The real-time calibrated imaging system successfully obtained data in an autonomous mode during all sky and daytime illumination conditions.  相似文献   

13.
The CO2 migrated from deeper to shallower layers may change its phase state from supercritical state to gaseous state (called phase transition). This phase transition makes both viscosity and density of CO2 experience a sharp variation, which may induce the CO2 further penetration into shallow layers. This is a critical and dangerous situation for the security of CO2 geological storage. However, the assessment of caprock sealing efficiency with a fully coupled multi-physical model is still missing on this phase transition effect. This study extends our previous fully coupled multi-physical model to include this phase transition effect. The dramatic changes of CO2 viscosity and density are incorporated into the model. The impacts of temperature and pressure on caprock sealing efficiency (expressed by CO2 penetration depth) are then numerically investigated for a caprock layer at the depth of 800 m. The changes of CO2 physical properties with gas partial pressure and formation temperature in the phase transition zone are explored. It is observed that phase transition revises the linear relationship of CO2 penetration depth and time square root as well as penetration depth. The real physical properties of CO2 in the phase transition zone are critical to the safety of CO2 sequestration. Pressure and temperature have different impact mechanisms on the security of CO2 geological storage.  相似文献   

14.
In a natural analog study of risks associated with carbon sequestration, impacts of CO2 on shallow groundwater quality have been measured in a sandstone aquifer in New Mexico, USA. Despite relatively high levels of dissolved CO2, originating from depth and producing geysering at one well, pH depression and consequent trace element mobility are relatively minor effects due to the buffering capacity of the aquifer. However, local contamination due to influx of brackish waters in a subset of wells is significant. Geochemical modeling of major ion concentrations suggests that high alkalinity and carbonate mineral dissolution buffers pH changes due to CO2 influx. Analysis of trends in dissolved trace elements, chloride, and CO2 reveal no evidence of in situ trace element mobilization. There is clear evidence, however, that As, U, and Pb are locally co-transported into the aquifer with CO2-rich brackish water. This study illustrates the role that local geochemical conditions will play in determining the effectiveness of monitoring strategies for CO2 leakage. For example, if buffering is significant, pH monitoring may not effectively detect CO2 leakage. This study also highlights potential complications that CO2 carrier fluids, such as brackish waters, pose in monitoring impacts of geologic sequestration.  相似文献   

15.
Surface coal mining inevitably deforests the land, reduces carbon (C) pool and generates different land covers. To re-establish the ecosystem C pool, post-mining lands are often afforested with fast-growing trees. A field study was conducted in the 5-year-old unreclaimed dump and reclaimed coal mine dump to assess the changes in soil CO2 flux and compared with the reference forest site. Changes in soil organic carbon (SOC) and total nitrogen stocks were estimated in post-mining land. Soil CO2 flux was measured using close dynamic chamber method, and the influence of environmental variables on soil CO2 flux was determined. Woody biomass C and SOC stocks of the reference forest site were threefold higher than that of 5-year-old reclaimed site. The mean soil CO2 flux was highest in 5-year-old reclaimed dump (2.37 μmol CO2 m?2 s?1) and lowest in unreclaimed dump (0.21 μmol CO2 m?2 s?1). Soil CO2 flux was highly influenced by environmental variables, where soil temperature positively influenced the soil CO2 flux, while soil moisture, relative humidity and surface CO2 concentration negatively influenced the soil CO2 flux. Change in soil CO2 flux under different land cover depends on plant and soil characteristics and environmental variables. The study concluded that assessment of soil CO2 flux in post-mining land is important to estimate the potential of afforestation to combat increased emission of soil CO2 at regional and global scale.  相似文献   

16.
Deep brine recovery enhanced by supercritical CO2 injection is proposed to be a win–win method for the enhancement of brine production and CO2 storage capacity and security. However, the cross-flow through interlayers under different permeability conditions is not well investigated for a multi-layer aquifer system. In this work, a multi-layer aquifer system with different permeability conditions was built up to quantify the brine production yield and the leakage risk under both schemes of pure brine recovery and enhanced by supercritical CO2. Numerical simulation results show that the permeability conditions of the interlayers have a significant effect on the brine production and the leakage risk as well as the regional pressure. Brine recovery enhanced by supercritical CO2 injection can improve the brine production yield by a factor of 2–3.5 compared to the pure brine recovery. For the pure brine recovery, strong cross-flow through interlayers occurs due to the drastic and extensive pressure drop, even for the relative low permeability (k = 10?20 m2) mudstone interlayers. Brine recovery enhanced by supercritical CO2 can successfully manage the regional pressure and decrease the leakage risk, even for the relative high permeability (k = 10?17 m2) mudstone interlayers. In addition, since the leakage of brine mainly occurs in the early stage of brine production, it is possible to minimize the leakage risk by gradually decreasing the brine production pressure at the early stage. Since the leakage of CO2 occurs in the whole production period and is significantly influenced by the buoyancy force, it may be more effective by adopting horizontal wells and optimizing well placement to reduce the CO2 leakage risk.  相似文献   

17.
Li  Huanan  Qin  Quande 《Natural Hazards》2017,88(2):1197-1209

In China, carbon capture and storage (CCS) is recognized as one of the most promising technologies through which to achieve a large reduction in CO2 emissions in future. The choice among different CCS technologies is critical for large-scale applications. With the aim of developing instructive policy suggestions for CCS development, this study proposed an interval programming model to select the optimal CCS technology among the different CCS technologies available in China. The analysis results indicate that the selection of CO2 capture technologies should be based on the actual situation of the project and industry being targeted. If the government implements mandatory CO2 emission reductions, storage in deep saline aquifers is the optimal choice for CO2 sequestration when oil prices are low and the number of available CO2 emission permits is large. In contrast, enhanced oil recovery is the optimal choice when oil prices increase and the availability of CO2 emission permits decreases. It is critical that the government reduce the operating cost and the cost of CO2 capture in particular.

  相似文献   

18.
The promise of the Brookhaven National Laboratory (BNL) Inelastic Neutron Scattering (INS) System was evaluated for use as a long-term, in-field monitor to detect cumulative changes in belowground carbon resulting from the leakage of CO2 stored in deep geological reservoirs. This system underwent tests at a facility constructed specifically for testing, under controlled conditions, various detection systems for monitoring near-surface transport and accumulations of CO2 fluxes emanating from a shallow buried, slotted horizontal well. The INS System was assessed by comparing the results from placing it above the horizontal well at a spot with a known high CO2 leak identified and quantified the previous years, with those obtained from background readings adjacent to the well. At two different “Hot Spots”, a suppression of about 14% in 2008 and about 7% in 2009 in carbon content above the well in comparison to the background signal was observed. An overview of these results is presented.  相似文献   

19.
  相似文献   

20.
This paper reports a preliminary investigation of CO2 sequestration and seal integrity at Teapot Dome oil field, Wyoming, USA, with the objective of predicting the potential risk of CO2 leakage along reservoir-bounding faults. CO2 injection into reservoirs creates anomalously high pore pressure at the top of the reservoir that could potentially hydraulically fracture the caprock or trigger slip on reservoir-bounding faults. The Tensleep Formation, a Pennsylvanian age eolian sandstone is evaluated as the target horizon for a pilot CO2 EOR-carbon storage experiment, in a three-way closure trap against a bounding fault, termed the S1 fault. A preliminary geomechanical model of the Tensleep Formation has been developed to evaluate the potential for CO2 injection inducing slip on the S1 fault and thus threatening seal integrity. Uncertainties in the stress tensor and fault geometry have been incorporated into the analysis using Monte Carlo simulation. The authors find that even the most pessimistic risk scenario would require ∼10 MPa of excess pressure to cause the S1 fault to reactivate and provide a potential leakage pathway. This would correspond to a CO2 column height of ∼1,500 m, whereas the structural closure of the Tensleep Formation in the pilot injection area does not exceed 100 m. It is therefore apparent that CO2 injection is not likely to compromise the S1 fault stability. Better constraint of the least principal stress is needed to establish a more reliable estimate of the maximum reservoir pressure required to hydrofracture the caprock.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号