首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 708 毫秒
1.
反应性溶质在不同质地饱和土柱中运移的数值模拟   总被引:2,自引:0,他引:2       下载免费PDF全文
盐渍土壤中的物理化学作用对溶质运移具有重要影响.吸附和离子交换作用是土壤中常见的反应.利用室内土柱出流实验对这两种作用下的单组分和多组分溶质运移进行了探讨,用CXTFIT软件模拟了只考虑对流-弥散的常规溶质运移;用水文地球化学模拟软件PHREEQC进行了耦合吸附和离子交换反应的模拟.结果表明,土壤质地对单组分溶质的运移具有重要影响,而在多组分溶质运移中,组分之间的相互作用对溶质运移具有更为重要的影响,并且耦合物理化学作用的模拟精度更高.  相似文献   

2.
利用室内一维饱和垂直土柱对保守性溶质运移和反应性溶质运移分别进行了试验,并用水文地球化学模拟软件PHREEQC模拟了保守性溶质Cl-的运移以及K+、Ca2+、Na+、Mg2+4种主要阳离子的反应运移过程,分析了土壤中发生的离子交换吸附和盐分运移过程,进一步模拟分析了不同入流溶液种类、次序以及有无置换反应情况下出流溶液的差别。结果表明:这些条件的不同均会对出流溶液的种类和浓度产生明显影响,表明水文地球化学反应对地下水中污染物的迁移会产生很大影响,在相关领域的研究中不宜忽略。  相似文献   

3.
地下多组分反应溶质运移数值模拟(RTM)是解释地球系统中的耦合过程和不同时空尺度对其影响的重要工具。RTM是研究地球科学基础理论、地质资源和环境等复杂地球化学过程的一个新方法,可用于如废物处置安全性评估、地下水污染研究、二氧化碳地质储存、金属矿床的地浸开采等的研究中。笔者首先回顾了反应溶质溶质运移模拟的发展历史,然后总结了反应溶质运移模拟的发展现状,再从耦合过程、空间尺度、裂隙和非均质介质处理角度说明了反应溶质运移模拟所面临的挑战。结合地下水质的演化、生物降解、CO2地质储存等具体实例讨论了反应溶质运移模拟的广泛应用前景,探讨了反应溶质运移模拟的未来发展方向。  相似文献   

4.
彭辉  孙晓文  蒋竹青 《水文》2023,(2):6-12
地表水与地下水之间存在强烈的相互作用,构建地表水和地下水耦合的水量和溶质运移模型可以揭示地表水和地下水之间的相互作用机制,并提高地表地下水量水质预测的精度。介绍了现有的地表地下耦合的水量及溶质运移模型,对比了各模型的求解方法和适用领域,总结了这些模型的应用现状。其中水量模型中全耦合模型精度较高,是未来模型发展的主流方向,溶质运移模型中溶质反应过程模拟较为欠缺。未来应在优化求解算法、提高溶质反应模拟和加强裂隙介质模拟等方面深入开展相关研究。  相似文献   

5.
《地下水》2019,(6)
目前的地下水环境影响评价中,地表水体常作为边界条件,不能体现地表水中的溶质运移过程。本文以某一赤泥堆场项目为例,采用GMS软件中的MT3D-USGS模块的SFT程序包建立河流—地下水—溶质耦合模型,预测氟化物在运营期14年运移扩散情况,评价污染物对区域地表水和地下水的影响。结果表明:(1)模拟流场能较真实的反应研究区的地表水和地下水流动特征;(2)在正常工况条件下,氟化物对地表水和地下水的影响较小;(3)在岩溶塌陷的情况下,氟化物仅2d就可运移至季节性河流,在运移2369d后最大超标距离已经达到河流,且氟化物有沿河流向下游运移的趋势,第14年氟化物沿河流运移到下游河流及沿岸地下水含水层,形成一个随河流扩散的污染晕。  相似文献   

6.
地下水数值模拟软件在地下水资源评价中发挥了重要的作用,而GMS是目前国际上最先进的综合性图形界面软件,可进行水流模拟、溶质运移模拟、反应运移模拟等。简述了地下水模拟模型的发展历程、GMS模拟软件各模块的功能,并综述了GMS软件在地下水资源评价方面的应用现状,最后提出了存在的问题及对地下水数值模拟的发展进行了展望。  相似文献   

7.
岩溶区地下水数值模拟研究进展   总被引:2,自引:2,他引:0  
岩溶含水介质的不均一性导致岩溶地下水流动、溶质运移和热量迁移的数学模拟研究成为地下水模拟的难点。本文综述了岩溶区地下水流模拟的几种方法,重点阐述了等效多孔介质法、双重连续介质法和三重介质法的定义、发展过程和适用范围,并回顾了这几种方法的研究成果。从等效多孔介质法到三重介质法,模拟精度不断提高,适用范围也逐渐由大区域实际问题向小区域理论研究过渡。介绍了溶质运移模拟和热迁移模拟的研究方法及实例。溶质运移模拟以对流弥散方程为基础,其中尺度效应是溶质运移模拟的重点研究问题;热量迁移模拟应考虑地下热水密度变化对地下热水运动的影响。溶质运移模拟和热量迁移模拟往往是将迁移模型和已经调试成功的地下水流动模型相耦合,从而达到模拟溶质及热量迁移的目的。由于溶质运移和热量迁移的复杂性,现阶段水流模型多数处于等效多孔介质模型阶段。综合理论及实际应用,指出精确刻画裂隙及管道和注重基础数学算法是岩溶水数值模拟进步的关键。   相似文献   

8.
基于CFP的岩溶管道流溶质运移数值模拟研究   总被引:2,自引:0,他引:2  
多重岩溶含水介质的复杂性导致岩溶地下水流动及溶质运移的数学模拟成为地下水研究难点之一。为了探讨岩溶多重含水介质中地下水流溶质运移特征,文章构建了管道流CFP水流模型和MT3DMS溶质运移三维耦合数值模型。在阐述管道流CFP和MT3DMS基本原理的基础上,通过建立水文地质概念模型算例(1个落水洞、4个直管道),探讨岩溶管道水流及溶质运移规律,分析讨论不同水文地质参数对浓度穿透曲线的影响。研究结果表明:管道流CFP模型能够刻画岩溶管道与基岩裂隙水流交换特征,MT3DMS模型能够模拟穿透曲线的拖尾现象,符合实际岩溶区特征。随着水力梯度、管道直径及管道渗透系数增大,孔隙度减小,浓度曲线峰值越大,峰值到达时间越快,浓度穿透曲线越对称。得出结论:耦合CFP水流模型和MT3DMS溶质运移模型能够刻画岩溶管道流溶质运移规律,为研究岩溶复杂介质污染物运移特征提供一种思路和途径。  相似文献   

9.
数值模拟法是地下水水量和水质评价的主要技术方法,通过简述地下水数值模拟的发展历程、FEFLOW软件的输入特点和功能,并结合FEFLOW在地下水模拟方面的应用现状,论述了对河流和断层处理的方法,最后提出了FEFLOW软件存在的问题及应用前景。研究结果可知:(1) FEFLOW是迄今为止功能最为齐全的地下水数值模拟软件,适用于各种尺度的地下水、多孔介质和热能传输项目,但这些领域基本都是水流和溶质运移耦合、水流和热量运移耦合等两场进行耦合,少见三场耦合研究实例;(2)存在无法实现源汇项单独处理等缺陷,仅能实现in/outflow on top/bottom菜单功能,降雨入渗和蒸发同时作用必须用净补给量来表达,增加了前处理的困难,在应用模型模拟时,由于FEFLOW网格划分时的数量受到限制,超大区域建模也容易出现不精确问题;(3)在对地下水污染物运移模型模拟时,通常考虑的是对流、弥散、吸附作用,而未有一阶化学非平衡反应,随着人类对地下水环境和质量的高度重视,对于两相有机和无机污染物迁移耦合研究将会是未来的研究重点。  相似文献   

10.
魏恒  肖洪浪 《冰川冻土》2013,35(6):1582-1589
在地下水的相关研究中,农药和石油等地下水污染、土地盐碱化、海水入侵等诸多实际问题主要的研究方法都涉及地下水溶质迁移模拟. 相比地下水水流模拟的相对完善,对溶质迁移的模拟比较薄弱且迁移过程本身复杂性较高,目前地下水溶质迁移的研究工作还处在全面发展的阶段. 文中阐述了反映地下水溶质迁移机理和过程的数学模型,综述了溶质迁移模拟在地下水污染物防治、土地盐碱化、海水入侵、石油和放射性废物扩散等问题的诸多应用,归类了目前溶质迁移模拟所使用的对流迁移、对流-弥散模拟等主要数值方法,并对这些方法的优缺点和应用实例做了总结. 最后,分析了目前溶质迁移模拟中存在的不足,展望了未来在参数确定、裂隙介质运移机理和多相介质条件下运移模拟可能取得的突破.  相似文献   

11.
Dynamic flow systems and transport of contaminants in karstic aquifers result from the actions of physical and chemical processes involving aqueous systems containing certain contaminants. These processes are elaborated, and pertinent mathematical and chemical equations are discussed, herein. Contaminant transport in karstic aquifers can be mathematically expressed by the basic equations evaluated primarily for the flow in porous, highly permeable aquifers. The effects of advection, hydrodynamic dispersion, and dilution are elaborated as physical processes that effect the movement of contaminants through groundwater in permeable rocks. Physical and chemical mechanisms that govem contaminant movement and groundwater flow through fractured media are proposed as the basis of an approximate scenario of contaminant transport through karstified carbonate rocks.  相似文献   

12.
Numerical and analytical modelling studies were conducted for the analysis of groundwater flow and contaminant transport at the Innisfil landfill site in the Town of Innisfil, County of Simcoe, in Ontario, Canada. Previously conducted field studies categorized the upper stratigraphy at the site into three units: upper sand unit, upper silt/clay unit and Intermediate Sand unit. Essentially horizontal groundwater movement in the two sand units and vertical downward flow in the silt/clay unit were reported by the field hydrogeologists. In the following, application of three computer models (FLOWPATH, USGS MOC and POLLUTE) for the simulation of the groundwater flow and contaminant transport processes at the Innisfil landfill site is described. The paper focuses on the calibration of groundwater flow and contaminant transport systems, and demonstrates how the insight gained during the contaminant transport calibration was used to improve the initial groundwater flow characterization of the hydrogeological system.  相似文献   

13.
地下水中铀的反应运移模拟   总被引:7,自引:0,他引:7       下载免费PDF全文
Merkel  B 《地球科学》2000,25(5):451-455
地下水中铀的反应运移模拟对地下水保护和铀矿区的恢复都很重要, 因为铀是一种化学毒害性很高的放射性元素.在地下水及水与固体之间都应考虑对流、弥散、稀释、吸附等化学相互作用.介绍了德国德累斯顿市附近的Koenigstein矿区淋滤条件的可行性研究结果.由于反应运移模拟需占用大量的CPU时间, 所有的运行在一天内完成, 但用简单的混合法进行了稀释.对于这种研究, PHREEQC 2.2证明是一个功能很强的工具.与PHREEQC相对应的数据库WATEQ4F涉及到48种元素、400多种物质、300多种矿物.根据铀和镭的特性, 对其作了一定的修改, 以使它更具相容性和可靠性.   相似文献   

14.
通过对昆明地热田深层基岩地下热水系统的地质、水文地质条件和开采现状的分析,建立了考虑温压变化和越流条件的岩溶热储层中地下热水的水流和溶质(污染物)运移的准三维非稳定流数学模型。对开采条件下地热田Ⅱ 块段地下热水系统中水位及F- 、Cl- 、NH+4 、SO2-4 浓度的模拟结果表明,所建立的模型合理、可靠,具有较高的仿真性。模型可预测不同条件下地热田地下热水的流场和溶质浓度的动态变化趋势,为防治地下热水环境的进一步恶化提供参考。   相似文献   

15.
The aim is to define the mechanism of chemical reactions that are responsible for the salinization of the Azraq basin along groundwater flow path, using inverse modeling technique by PHREEQC Interactive 2.8 for Windows. The chemical analysis of representative groundwater samples was used to predict the causes of salinization of groundwater. In addition, the saturation indices analysis was used to characterize the geochemical processes that led to the dissolution of mineral constituents within the groundwater aquifer system. According to the modeling results, it was noted that the groundwater at the recharge area was undersaturated with respect to calcite, dolomite, gypsum, anhydrite, and halite. Thus, the water dissolved these minerals during water rock interaction, and therefore, the concentration of Ca, Mg, Na, and SO4 increased along the groundwater flow path. Furthermore, the groundwater at the discharge area was oversaturated with respect to calcite and dolomite. This meant that the water would precipitate these minerals along the flow path, while the water was undersaturated with respect to gypsum and halite throughout the simulated path; this showed the dissolution processes that take place during water-rock interaction. Therefore, the salinity of the groundwater increased significantly along the groundwater flow paths.  相似文献   

16.
Combining groundwater flow models with solute transport models represents a common challenge in groundwater resources assessments and contaminant transport modeling. Groundwater flow models are usually constructed at somewhat larger scales (involving a coarser discretization) to include natural boundary conditions. They are commonly calibrated using observed groundwater levels and flows (if available). The groundwater solute transport models may be constructed at a smaller scale with finer discretization than the flow models in order to accurately delineate the solute source and the modeled target, to capture any heterogeneity that may affect contaminant migration, and to minimize numerical dispersion while still maintaining a reasonable computing time. The solution that is explored here is based on defining a finer grid subdomain within a larger coarser domain. The local-grid refinement (LGR) implemented in the Modular 3D finite-difference ground-water flow model (MODFLOW) code has such a provision to simulate groundwater flow in two nested grids: a higher-resolution sub-grid within a coarse grid. Under the premise that the interface between both models was well defined, a comprehensive sensitivity and uncertainty analysis was performed whereby the effect of a parameter perturbation in a coarser-grid model on transport predictions using a higher-resolution grid was quantified. This approach was tested for a groundwater flow and solute transport analysis in support of a safety evaluation of the future Belgian near-surface radioactive waste disposal facility. Our reference coarse-grid groundwater flow model was coupled with a smaller fine sub-grid model in two different ways. While the reference flow model was calibrated using observed groundwater levels at a scale commensurate with that of the coarse-grid model, the fine sub-grid model was used to run a solute transport simulation quantifying concentrations in a hypothetical well nearby the disposal facility. When LGR coupling was compared to a one-way coupling, LGR was found to provide a smoother flow solution resulting in a more CPU-efficient transport solution. Parameter sensitivities performed with the groundwater flow model resulted in sensitivities at the head observation locations. These sensitivities identified the recharge as the most sensitive parameter, with the hydraulic conductivity of the upper aquifer as the second most sensitive parameter in regard to calculated groundwater heads. Based on one-percent sensitivity maps, the spatial distribution of the observations with the highest sensitivities is slightly different for the upper aquifer hydraulic conductivity than for recharge. Sensitivity analyses were further performed to assess the prediction scaled sensitivities for hypothetical contaminant concentrations using the combined groundwater flow and solute transport models. Including all pertinent parameters into the sensitivity analysis identified the hydraulic conductivity of the upper aquifer as the most sensitive parameter with regard to the prediction of contaminant concentrations.  相似文献   

17.
. The natural attenuation of a binary mixture of toluene and 1,2,4-trimethylbenzene, which was previously experimentally demonstrated in anaerobic column experiments, was simulated with the newly-developed PHREEQC model to reveal the biogeochemical processes involved. The processes considered in this model include advection, diffusion, sorption, redox reactions (e.g., oxidation of toluene and 1,2,4-trimethylbenzene coupled to the reduction of microbial ferric iron), precipitation of secondary minerals such as siderite and magnetite, and dissolution of hydrous ferric oxides, as well as other thermodynamic equilibrium reactions. The functions of advection and diffusion built into the PHREEQC were conventionally simulated. The sorption was kinetically simulated based on a bicontinuum model, whereas biodegradation was described using a multiple-term Monod model. The processes mentioned above were coupled with a geochemical equilibrium model. The consistency between the experimental and modeling results indicates that the processes defined and the controlling parameters chosen could describe the coupled interactions between transport and biogeochemical reactions for the studied system. The discrepancy between modeling and experimental observations, however, also revealed the limitation of the modeling approach. In general, the model approach, which incorporates simplified mathematical representations of the true physico-chemical dynamics of the sorption and biodegradation processes of toluene and 1,2,4-trimethylbenzene under anaerobic conditions is a very efficient and good predictive tool in management and remediation of contaminant groundwater aquifers.  相似文献   

18.
昆明市地热田越流含水系统中地下热水的数值模拟   总被引:7,自引:0,他引:7  
深层基岩地下(热)水水化学污染问题日趋严重,急需定量而仿真地模拟和预报天然状态和各种人为工程经济活动下地下(热)水流动及溶质(或污染物)的运移。在充分认识地质、水文地质条件的基础上,建立了考虑温压变化和越流条件的昆明市地热田深层基岩地下热水系统中水流和溶质运移的准三维非稳定流数学模型。模型用于开采条件下地热田地下热水水位及 F、Cl浓度的模拟,模拟结果具有较高的仿真性,拟合误差一般小于 2%~5%,表明模型合理、可靠。应用所建模型预测了开采条件下昆明市地热田II块段地下热水流场和溶质浓度动态的变化趋势,并提出了控制地下热水环境进一步恶化的措施。  相似文献   

19.
The vadose zone-aquifer is an important media for water circulation and solute transport in soil, surface water and groundwater. It is a research hotspot in the field of earth science. In this paper, we took the groundwater contamination risk assessment for the vadose zone-aquifers as the review object. The groundwater contamination status of vadose zone-aquifers was pointed out. The characterization of vadose zone-aquifers, the flow and solute transport as well as the key effect parameters were systematically analyzed and the research progresses were reviewed. Finally, the existing problems in the groundwater contaminant risk assessment under the condition of different scales of vadose zone-aquifers and future research direction were pointed out from the perspective of groundwater contaminant risk assessment. In particular, more attention should be paid to the groundwater contamination risk assessment based on percolation threshold.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号