共查询到20条相似文献，搜索用时 31 毫秒
1.
Diffraction and anelasticity problems involving decaying, “evanescent” or “inhomogeneous” waves can be studied and modelled using the notion of “complex rays”. The wavefront or “eikonal” equation for such waves is in general complex and leads to rays in complex position-slowness space. Initial conditions must be specified in that domain: for example, even for a wave originating in a perfectly elastic region, the ray to a real receiver in a neighbouring anelastic region generally departs from a complex point on the initial-values surface. Complex ray theory is the formal extension of the usual Hamilton equations to complex domains. Liouville's phase-space-incompressibility theorem and Fermat's stationary-time principle are formally unchanged. However, an infinity of paths exists between two fixed points in complex space all of which give the same final slowness, travel time, amplitude, etc. This does not contradict the fact that for a given receiver position there is a unique point on the initial-values surface from which this infinite complex ray family emanates.In perfectly elastic media complex rays are associated with, for example, evanescent waves in the shadow of a caustic. More generally, caustics in anelastic media may lie just outside the real coordinate subspace and one must trace complex rays around the complex caustic in order to obtain accurate waveforms nearby or the turning waves at greater distances into the lit region. The complex extension of the Maslov method for computing such waveforms is described. It uses the complex extension of the Legendre transformation and the extra freedom of complex rays makes pseudocaustics avoidable. There is no need to introduce a Maslov/KMAH index to account for caustics in the geometrical ray approximation, the complex amplitude being generally continuous. Other singular ray problems, such as the strong coupling around acoustic axes in anisotropic media, may also be addressed using complex rays.Complex rays are insightful and practical for simple models (e.g. homogeneous layers). For more complicated numerical work, though, it would be desirable to confine attention to real position coordinates. Furthermore, anelasticity implies dispersion so that complex rays are generally frequency dependent. The concept of group velocity as the velocity of a spatial or temporal maximum of a narrow-band wave packet does lead to real ray/Hamilton equations. However, envelope-maximum tracking does not itself yield enough information to compute synthetic seismogramsFor anelasticity which is weak in certain precise senses, one can set up a theory of real, dispersive wave-packet tracking suitable for synthetic seismogram calculations in linearly visco-elastic media. The seismologically-accepiable constant-Q rheology of Liu et al. (1976), for example, satisfies the requirements of this wave-packet theory, which is adapted from electromagnetics and presented as a reasonable physical and mathematical basis for ray modelling in inhomogeneous, anisotropic, anelastic media. Dispersion means that one may need to do more work than for elastic media. However, one can envisage perturbation analyses based on the ray theory presented here, as well as extensions like Maslov's which are based on the Hamiltonian properties. 相似文献
2.
The coupling ray theory is usually applied to anisotropic common reference rays, but it is more accurate if it is applied to reference rays which are closer to the actual wave paths. If we know that a medium is close to uniaxial (transversely isotropic), it may be advantageous to trace reference rays which resemble the SH–wave and SV–wave rays. This paper is devoted to defining and tracing these SH and SV reference rays of elastic S waves in a heterogeneous generally anisotropic medium which is approximately uniaxial (approximately transversely isotropic), and to the corresponding equations of geodesic deviation (dynamic ray tracing). All presented equations are simultaneously applicable to ordinary and extraordinary reference rays of electromagnetic waves in a generally bianisotropic medium which is approximately uniaxially anisotropic. The improvement of the coupling–ray–theory seismograms calculated along the proposed SH and SV reference rays, compared to the coupling–ray–theory seismograms calculated along the anisotropic common reference rays, has already been numerically demonstrated by the authors in four approximately uniaxial velocity models. 相似文献
3.
Seismic amplitude variations with offset contain information about the elastic parameters. Prestack amplitude analysis seeks to extract this information by using the variations of the reflection coefficients as functions of angle of incidence. Normally, an approximate formula is used for the reflection coefficients, and variations with offset of the geometrical spreading and the anelastic attenuation are often ignored. Using angle of incidence as the dependent variable is also computationally inefficient since the data are recorded as a function of offset. Improved approximations have been derived for the elastic reflection and transmission coefficients, the geometrical spreading and the complex travel-time (including anelastic attenuation). For a 1 D medium, these approximations are combined to produce seismic reflection amplitudes (P-wave, S-wave or converted wave) as a Taylor series in the offset coordinate. The coefficients of the Taylor series are computed directly from the parameters of the medium, without using the ray parameter. For primary reflected P-waves, dynamic ray tracing has been used to compute the offset variations of the transmission coefficients, the reflection coefficient, the geometrical spreading and the anelastic attenuation. The offset variation of the transmission factor is small, while the variations in the geometrical spreading, absorption and reflection coefficient are all significant. The new approximations have been used for seismic modelling without ray tracing. The amplitude was approximated by a fourth-order polynomial in offset, the traveltime by the normal square-root approximation and the absorption factor by a similar expression. This approximate modelling was compared to dynamic ray tracing, and the results are the same for zero offset and very close for offsets less than the reflector depth. 相似文献
4.
5.
B. ARNTSEN 《Geophysical Prospecting》1988,36(5):478-503
Ray theories are a class of methods often chosen to compute synthetic seismograms due to their efficiency and ability to deal with complex, three-dimensional inhomogeneous media. To deal with the large number of rays needed to compute synthetic seismograms, a ray generation algorithm is given which is capable of generating a numerical code describing each ray. The code describes a subset of all possible rays by considering only pre-critical reflections. In a horizontally plane-layered medium the generation of rays and computation of amplitudes and traveltimes can be efficiently accomplished by grouping the rays into reflection order and dynamic analogue groups. Expressions summing all unconverted rays and rays with a single mode conversion are given for source and receiver located at arbitrary positions within the medium. Examples of zero-offset synthetic VSPs obtained by this method are given. 相似文献
6.
Diffraction and anelasticity problems involving decaying, evanescent or inhomogeneous waves can be studied and modelled using the notion of complex rays. The wavefront or eikonal equation for such waves is in general complex and leads to rays in complex position-slowness space. Initial conditions must be specified in that domain: for example, even for a wave originating in a perfectly elastic region, the ray to a real receiver in a neighbouring anelastic region generally departs from a complex point on the initial-values surface. Complex ray theory is the formal extension of the usual Hamilton equations to complex domains. Liouville's phase-space-incompressibility theorem and Fermat's stationary-time principle are formally unchanged. However, an infinity of paths exists between two fixed points in complex space all of which give the same final slowness, travel time, amplitude, etc. This does not contradict the fact that for a given receiver position there is a unique point on the initial-values surface from which this infinite complex ray family emanates.
In perfectly elastic media complex rays are associated with, for example, evanescent waves in the shadow of a caustic. More generally, caustics in anelastic media may lie just outside the real coordinate subspace and one must trace complex rays around the complex caustic in order to obtain accurate waveforms nearby or the turning waves at greater distances into the lit region. The complex extension of the Maslov method for computing such waveforms is described. It uses the complex extension of the Legendre transformation and the extra freedom of complex rays makes pseudocaustics avoidable. There is no need to introduce a Maslov/KMAH index to account for caustics in the geometrical ray approximation, the complex amplitude being generally continuous. Other singular ray problems, such as the strong coupling around acoustic axes in anisotropic media, may also be addressed using complex rays.
Complex rays are insightful and practical for simple models (e.g. homogeneous layers). For more complicated numerical work, though, it would be desirable to confine attention to real position coordinates. Furthermore, anelasticity implies dispersion so that complex rays are generally frequency dependent. The concept of group velocity as the velocity of a spatial or temporal maximum of a narrow-band wave packet does lead to real ray/Hamilton equations. However, envelope-maximum tracking does not itself yield enough information to compute synthetic seismograms.
For anelasticity which is weak in certain precise senses, one can set up a theory of real, dispersive wave-packet tracking suitable for synthetic seismogram calculations in linearly visco-elastic media. The seismologically-accepiable constant-Q rheology of Liu et al. (1976), for example, satisfies the requirements of this wave-packet theory, which is adapted from electromagnetics and presented as a reasonable physical and mathematical basis for ray modelling in inhomogeneous, anisotropic, anelastic media. Dispersion means that one may need to do more work than for elastic media. However, one can envisage perturbation analyses based on the ray theory presented here, as well as extensions like Maslov's which are based on the Hamiltonian properties. 相似文献
7.
A. Hanyga 《Pure and Applied Geophysics》2000,157(5):679-717
8.
The solutions of traveltime inversion problems are often not unique because of the poor match between the raypath distribution and the tomographic grid. However, by adapting the local resolution iteratively, by means of a singular value analysis of the tomographic matrix, we can reduce or eliminate the null space influence on our earth image: in this way, we get a much more reliable estimate of the velocity field of seismic waves. We describe an algorithm for an automatic regridding, able to fit the local resolution to the available raypaths, which is based on Delaunay triangulation and Voronoi tessellation. It increases the local pixel density where the null space energy is low or the velocity gradient is large, and reduces it elsewhere. Consequently, the tomographic image can reveal the boundaries of complex objects, but is not affected by the ambiguities that occur when the grid resolution is not adequately supported by the available raypaths. 相似文献
9.
The numerical tracing of short ray segments and interpolation of new rays between these ray segments are central constituents of the wavefront construction method. In this paper the details of the ray tracing and ray-interpolation procedures are described. The ray-tracing procedure is based on classical ray theory (high-frequency approximation) and it is both accurate and efficient. It is able to compute both kinematic and dynamic parameters at the endpoint of the ray segments, given the same set of parameters at the starting point of the ray. Taylor series are used to approximate the raypath so that the kinematic parameters (new position and new ray tangent) may be found, while a staggered finite-difference approximation gives the dynamic parameters (geometrical spreading). When divergence occurs in some parts of the wavefront, new rays are interpolated. The interpolation procedure uses the kinematic and dynamic parameters of two parent rays to estimate the initial parameters of a new ray on the wavefront between the two rays. Third-order (cubic) interpolation is used for interpolation of position, ray tangent and take-off vector from the source) while linear interpolation is used for the geometrical spreading parameters. 相似文献
10.
地震波走时和射线的有限差分计算 总被引：5，自引：0，他引：5
以往都是采用射线追踪的方法计算地震波的走时和射线，但是当速度模型复杂时这种方法存在一些问题。本文提出另一种计算地震波走时和射线的方法。该方法从程函方程出发，利用互换原理和Ｆｅｒｍａｔ原理计算出各种波的到时和射线。解决了射线追踪方法存在的问题。为地震波走时和射线的计算以及地震波走时反演开辟了一条新途径。 相似文献
11.
最短路径射线追踪算法,用预先设置的网络节点的连线表示地震波传播路径,当网络节点稀疏时,获得的射线路径呈之字形,计算的走时比实际走时系统偏大. 本文在波前扩展和反向确定射线路径的过程中,在每个矩形单元内,通过对某边界上的已知走时节点的走时进行线性插值,并利用Fermat原理即时求出从该边界到达其他边界节点的最小走时及其子震源位置和射线路径,发展了相应的动态网络算法. 从而克服了最短路径射线追踪算法的缺陷,大大提高了最小走时和射线路径的计算精度. 相似文献
12.
JOS M. CARCIONE 《Geophysical Prospecting》1992,40(7):761-783
When a seismic signal propagates through a finely layered medium, there is anisotropy if the wavelengths are long enough compared to the layer thicknesses. It is well known that in this situation, the medium is equivalent to a transversely isotropic material. In addition to anisotropy, the layers may show intrinsic anelastic behaviour. Under these circumstances, the layered medium exhibits Q anisotropy and anisotropic velocity dispersion. The present work investigates the anelastic effect in the long-wavelength approximation. Backus's theory and the standard linear solid rheology are used as models to obtain the directional properties of anelasticity corresponding to the quasi-compressional mode qP, the quasi-shear mode qSV, and the pure shear mode SH, respectively. The medium is described by a complex and frequency-dependent stiffness matrix. The complex and phase velocities for homogeneous viscoelastic waves are calculated from the Christoffel equation, while the wave-fronts (energy velocities) and quality factor surfaces are obtained from energy considerations by invoking Poynting's theorem. We consider two-constituent stationary layered media, and study the wave characteristics for different material compositions and proportions. Analyses on sequences of sandstone-limestone and shale-limestone with different degrees of anisotropy indicate that the quality factors of the shear modes are more anisotropic than the corresponding phase velocities, cusps of the qSV mode are more pronounced for low frequencies and midrange proportions, and in general, attenuation is higher in the direction perpendicular to layering or close to it, provided that the material with lower velocity is the more dissipative. A numerical simulation experiment verifies the attenuation properties of finely layered media through comparison of elastic and anelastic snapshots. 相似文献
13.
14.
二步法射线追踪 总被引：12，自引：2，他引：12
本文提出的二步法射线追踪,能够在复杂地质模型下有效、准确地确定射线在炮点的出射角,使得射线恰好到达检波点.射线到达地面的位置是射线在炮点的出射角的函数,称为出射函数.二步法射线追踪通过搜索出射函数的极值点来确定其单调变化的区间;然后通过比较检波点位置与出射函数极值的大小,确定与检波点相对应的出射角究竟落在出射函数的哪一个单调变化的区间里;最后,利用出射函数在局部区域里单调变化的性质,迅速、准确地确定与检波点相对应的出射角.出射函数的极值点,对于共炮集中每一个检波点和检波点中每一个不同方向的入射射线都是适用的,因此,二步法射线追踪只需要进行一次一维全局搜索（极值点搜索）.另外,本文采用B-样条的线性组合来表示速度函数,通过提高B-样条的阶数,可以改善速度函数的光滑程度,从而既满足射线追踪对于速度函数光滑性的要求,又加强射线在炮点的出射角对于射线的控制作用. 相似文献
15.
COMPUTATION OF ZERO-OFFSET VERTICAL SEISMIC PROFILES INCLUDING GEOMETRICAL SPREADING AND ABSORPTION*
Synthetic vertical seismic profiles (VSP) provide a useful tool in the interpretation of VSP data, allowing the interpreter to analyze the propagation of seismic waves in the different layers. A zero-offset VSP modeling program can also be used as part of an inversion program for estimating the parameters in a layered model of the subsurface. Proposed methods for computing synthetic VSP are mostly based on plane waves in a horizontally layered elastic or anelastic medium. In order to compare these synthetic VSP with real data a common method is to scale the data with the spherical spreading factor of the primary reflections. This will in most cases lead to artificial enhancement of multiple reflections. We apply the ray series method to the equations of motion for a linear viscoelastic medium after having done a Fourier transformation with respect to the time variable. This results in a complex eikonal equation which, in general, appears to be difficult to solve. For vertically traveling waves in a horizontally layered viscoelastic medium the solution is easily found to be the integral along the ray of the inverse of the complex propagation velocity. The spherical spreading due to a point source is also complex, and it is equal to the integral along the ray of the complex propagation velocity. Synthetic data examples illustrate the differences between spherical, cylindrical, and plane waves in elastic and viscoelastic layered media. 相似文献
16.
By introducing a new parameter, slowness deviation, a ray-path-length-dependent slowness model has been previously developed. Synthetic tests indicate that for a horizontal layered slowness structure, the new model gives a good estimate of the weighted average slowness of a ray when the rays considered cover a small range of take-off angles. When the rays considered cover a large range of take-off angles, the new model gives good estimates of the weighted average slowness for the long rays, but large errors still remain for the short rays. 相似文献
17.
本文提出了在计算机上实现分块三维地壳模型及利用加权最小二乘拟合生成平缓光滑的三维速度函数的方法,给出了适用于分块、块内速度连续变化的三维模型中Cauchy射线追踪的新算法,简介了基于上述方法反射线的基本理论所编制的合成三维理论地震图的程序包RSSGTD.给出的两个盆地状模型的算例表明,所使用的模型生成方法具有模拟复杂地壳结构的能力;与三维样条函数方法比较,最小二乘拟合方法能给出更加适合射线方法合成地震图计算的速度函数,并且内存小、计算速度快;所给出的Cauchy射线追踪算法能够适合块状模型中任何体波射线的追踪. 相似文献
18.
A new ray-tracing method called linear traveltime interpolation (LTI) is proposed. This method computes traveltimes and raypaths in a 2D velocity structure more rapidly and accurately than other conventional methods. The LTI method is formulated for a 2D cell model, and calculations of traveltimes and raypaths are carried out only on cell boundaries. Therefore a raypath is considered to be always straight in a cell with uniform velocity. This approach is suitable to tomography analysis. The algorithm of LTI consists of two separate steps: step 1 calculates traveltimes on all cell boundaries; step 2 traces raypaths for all pairs of receivers and the shot. A traveltime at an arbitrary point on a cell boundary is assumed to be linearly interpolated between traveltimes at the adjacent discrete points at which we calculate traveltimes. Fermat's principle is used as the criterion for choosing the correct traveltimes and raypaths from several candidates routinely. The LTI method has been compared numerically with the shooting method and the finite-difference method (FDM) of the eikonal equation. The results show that the LTI method has great advantages of high speed and high accuracy in the calculation of both traveltimes and raypaths. The LTI method can be regarded as an advanced version of the conventional FDM of the eikonal equation because the formulae of FDM are independently derived from LTI. In the process of derivation, it is shown theoretically that LTI is more accurate than FDM. Moreover in the LTI method, we can avoid the numerical instability that occurs in Vidale's method where the velocity changes abruptly. 相似文献
19.
I. Ya. Chebotareva 《Izvestiya Physics of the Solid Earth》2018,54(2):201-213
Highly efficient approximate ray tracing techniques which can be used in seismic emission tomography and in other methods requiring a large number of raypaths are described. The techniques are applicable for the gradient and plane-layered velocity sections of the medium and for the models with a complicated geometry of contrasting boundaries. The empirical results obtained with the use of the discussed ray tracing technologies and seismic emission tomography results, as well as the results of numerical modeling, are presented. 相似文献
20.
Ralph Bridle Nikolai Barsoukov Mohammad Al-Homaili Robert Ley Ameerah Al-Mustafa 《Geophysical Prospecting》2006,54(6):667-680
We present a seismic Test Line, provided by Saudi Aramco for various research teams, to highlight a few major challenges in land data processing due to near‐surface anomalies. We discuss state‐of‐the‐art methods used to compensate for shallow distortions, including single‐layer, multilayer, plus/minus, refraction and tomostatics methods. They are a starting point for the new technologies presented in other papers, all dealing with the same challenging data described here. The difficulties on the Test Line are mostly due to the assumption of vertical raypaths, inherent in classical applications of near‐surface correction statics. Even the most detailed velocity/depth model presents difficulties, due to the compleX‐raypath. There is a need for methods which are based on more complex models andtheories. 相似文献