首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 843 毫秒
1.
Shatter cones are one of the most widely recognized pieces of evidence for meteorite impact events on Earth, but the process responsible for their formation is still debated. Evidence of melting on shatter cone surfaces has been rarely reported in the literature from terrestrial impact craters but has been recently observed in impact experiments. Although several models for shatter cones formation have been proposed, so far, no one can explain all the observed features. Shatter cones' from the Vista Alegre impact structure, Brazil, formed in fine‐grained basalt of the Jurassic‐Cretaceous Serra Geral Formation (Paraná large igneous province). A continuous quenched melt film, consisting of a crystalline phase, mica, and amorphous material, decorates the striated surface. Ultracataclasites, containing subrounded pyroxene clasts in an ultrafine‐grained matrix, occur subparallel to the striated surface. Several techniques were applied to characterize the crystalline phase in the melt, including Raman spectroscopy and transmission electron microscopy. Results are not consistent with any known mineral, but they do suggest a possible rare or new type of clinopyroxene. This peculiar evidence of melting and cataclasis in relation with shatter cone surfaces is interpreted as the result of tensile fracturing at the tip of a fast propagating shock‐induced rupture, which led to the formation of shatter cones at the tail of the shock front, likely during the early stage of the impact events.  相似文献   

2.
Shatter cones are diagnostic for the recognition of meteorite impact craters. They are unambiguously identifiable in the field and the only macroscopic shock deformation feature. However, the physical boundary conditions and exact formation mechanism(s) are still a subject of debate. Melt films found on shatter cone surfaces may allow the constraint of pressure–temperature conditions during or immediately after their formation. Within the framework of the MEMIN research group, we recovered 24 shatter cone fragments from the ejecta of hypervelocity impact experiments. Here, we focus on silicate melt films (now quenched to glass) found on shatter cone surfaces formed in experiments with 20–80 cm sized sandstone targets, impacted by aluminum and iron meteorite projectiles of 5 and 12 mm diameter at velocities of 7.0 and 4.6 km s−1, respectively. The recovered shatter cone fragments vary in size from 1.2 to 9.3 mm. They show slightly curved, striated surfaces, and conical geometries with apical angles of 36°–52°. The fragments were recovered from experiments with peak pressures ranging from 46 to 86 GPa, and emanated from a zone within 0.38 crater radii. Based on iSale modeling and petrographic investigations, the shatter coned material experienced low bulk shock pressures of 0.5–5 GPa, whereas deformation shows a steep increase toward the shatter cone surface leading to localized melting of the rock, resulting in both vesicular as well as polished melt textures visible under the SEM. Subjacent to the melt films are zones of fragmentation and brittle shear, indicating movement away from the shatter cone apex of the rock that surrounds the cone. Smearing and extension of the melt film indicates subsequent movement in opposite direction to the comminuted and brecciated shear zone. We believe the documented shear textures and the adjacent smooth melt films can be related to frictional melting, whereas the overlying highly vesiculated melt layer could indicate rapid pressure release. From the observation of melting and mixing of quartz, phyllosilicates, and rutile in this overlying texture, we infer high, but very localized postshock temperatures exceeding 2000 °C. The melted upper part of the shatter cone surface cross-cuts the fragmented lower section, and is accompanied by PDFs developed in quartz parallel to the {112} plane. Based on the overprinting textures and documented shock effects, we hypothesize shatter cones start to form during shock loading and remain an active fracture surface until pressure release during unloading and infer that shatter cone surfaces are mixed mode I/II fracture surfaces.  相似文献   

3.
Abstract— Landsat TM, aerial photograph image analysis, and field mapping of Witwatersrand supergroup meta‐sedimentary strata in the collar of the Vredefort Dome reveals a highly heterogeneous internal structure involving folds, faults, fractures, and melt breccias that are interpreted as the product of shock deformation and central uplift formation during the 2.02 Ga Vredefort impact event. Broadly radially oriented symmetric and asymmetric folds with wavelengths ranging from tens of meters to kilometers and conjugate radial to oblique faults with strike‐slip displacements of, typically, tens to hundreds of meters accommodated tangential shortening of the collar of the dome that decreased from ?17% at a radius from the dome center of 21 km to <5% at a radius of 29 km. Ubiquitous shear fractures containing pseudotachylitic breccia, particularly in the metapelitic units, display local slip senses consistent with either tangential shortening or tangential extension; however, it is uncertain whether they formed at the same time as the larger faults or earlier, during the shock pulse. In addition to shatter cones, quartzite units show two fracture types—a cmspaced rhomboidal to orthogonal type that may be the product of shock‐induced deformation and later joints accomplishing tangential and radial extension. The occurrence of pseudotachylitic breccia within some of these later joints, and the presence of radial and tangential dikes of impact melt rock, confirm the impact timing of these features and are suggestive of late‐stage collapse of the central uplift.  相似文献   

4.
Abstract— Analytical scanning electron microscopy has been used to investigate the surface textures and compositions of newly exposed shatter cones from the 1.85 Ga Sudbury impact structure, Canada. Unusual surface microstructures are observed at the micron scale, including silicate melt smears, melt fibres and melt splats. Silicate and Ni-rich spherules up to 5 μm in diameter adorn earlier-formed surface features, and we interpret these to be condensates formed due to shock-induced vaporization of the shatter cone surfaces. The development of striations on the shatter cones is attributed to shock-related fracture and slip. Formation of melts and spherules indicates that the highest ranks of shock metamorphism (Stages IV and V) were realized, but only on a very localized scale. Shatter cone surfaces are, therefore, likely sites for the development of high-pressure polymorphs and, if the chemistry is appropriate, fullerenes. As such, they may be equivalent to “Type A” pseudotachylytes and shock veins in meteorites.  相似文献   

5.
Past, present, and forthcoming planetary rover missions to Mars and other planetary bodies are equipped with a large number of scientific cameras. The very large number of images resulting from this, combined with tight time constraints for navigation, measurements, and analyses, pose a major challenge for the mission teams in terms of scientific target evaluation. Shatter cones are the only macroscopic evidence for impact-induced shock metamorphism and therefore impact craters on Earth. The typical features of shatter cones, such as striations and horsetail structures, are particularly suitable for machine learning methods. The necessary training images do not exist for such a case; therefore, we pursued the approach of producing them artificially. Using PRo3D, a viewer developed for the interactive exploration and geologic analysis of high-resolution planetary surface reconstructions, we virtually placed shatter cones in 3-D background scenes processed from true Mars rover imagery. We use PRo3D-rendered images of such scenes as training data for machine learning architectures. Terrestrial analog studies in Ethiopia supported our lab work and were used to test the resulting neural network of this feasibility study. The result showed that our approach with shatter cones in artificial Mars rover scenes is suitable to train neural networks for automatic detection of shatter cones. In addition, we have identified several aspects that can be used to improve the training of the neural network and increase the recognition rate. For example, using background data with a higher resolution in order to have equal resolution of object (shatter cone) and Martian background and increase the number of objects that can be placed in the training data set. Also using better lighting reconstructions and a better radiometric adaption between object and Martian background would further improve the results.  相似文献   

6.
Shocked quartz and feldspar grains commonly exhibit planar microstructures, such as planar fractures, planar deformation features, and possibly microtwins, which are considered to have formed by shock metamorphism. Their orientation and frequency are typically reported to be randomly distributed across a sample. The goal of this study is to investigate whether such microstructures are completely random within a given sample, or whether their orientation might also retain information on the direction of the local shock wave propagation. For this work, we selected samples of shatter cones, which were cut normal to the striated surface and the striation direction, from three impact structures (Keurusselkä, Finland, and Charlevoix and Manicouagan, Canada). These samples show different stages of pre‐impact tectonic deformation. Additionally, we investigated several shocked granite samples, selected at different depths along the drill core recovered during the joint IODP‐ICDP Chicxulub Expedition 364 (Mexico). In this case, thin sections were cut along two orthogonal directions, one parallel and one normal to the drill core axis. All the results refer to optical microscopy and universal‐stage analyses performed on petrographic thin sections. Our results show that such shock‐related microstructures do have a preferred orientation, but also that relating their orientation with the possible shock wave propagation is quite challenging and potentially impossible. This is largely due to the lack of dedicated experiments to provide a key to interpret the observed preferred orientation and to the lack of information on postimpact orientation modifications, especially in the case of the drill core samples.  相似文献   

7.
The very young Wabar craters formed by impact of an iron meteorite and are known to the scientific community since 1933. We describe field observations made during a visit to the Wabar impact site, provide analytical data on the material collected, and combine these data with poorly known information discovered during the recovery of the largest meteorites. During our visit in March 2008, only two craters (Philby‐B and 11 m) were visible; Philby‐A was completely covered by sand. Mapping of the ejecta field showed that the outcrops are strongly changing over time. Combining information from different visitors with our own and satellite images, we estimate that the large seif dunes over the impact site migrate by approximately 1.0–2.0 m yr?1 southward. Shock lithification took place even at the smallest, 11 m crater, but planar fractures (PFs) and undecorated planar deformation features (PDFs), as well as coesite and stishovite, have only been found in shock‐lithified material from the two larger craters. Shock‐lithified dune sand material shows perfectly preserved sedimentary structures including cross‐bedding and animal burrows as well as postimpact structures such as open fractures perpendicular to the bedding, slickensides, and radiating striation resembling shatter cones. The composition of all impact melt glasses can be explained as mixtures of aeolian sand and iron meteorite. We observed a partial decoupling of Fe and Ni in the black impact glass, probably due to partitioning of Ni into unoxidized metal droplets. The absence of a Ca‐enriched component demonstrates that the craters did not penetrate the bedrock below the sand sheet, which has an estimated thickness of 20–30 m.  相似文献   

8.
Abstract— The Vredefort structure in South Africa was created by a meteorite impact about two billion years ago. Since that time, the crater has been deeply eroded; so to estimate its original size, researchers have had to rely heavily upon comparison to other terrestrial impact structures. Recent estimates of the original crater diameter range from 160 km to as much as 400 km. In this study, we combined the capabilities of both hydrocode and finite-element modeling, using the former to predict where the pressure of an impact-generated shock wave would have been high enough to form planar deformation features (PDFs) and shatter cones and the latter to follow the subsequent displacement of these shock isobars during the collapse of the crater. We established constraints on the sizes of the projectile and the transient crater (and, thus, on the size of the final crater) by comparing the observed locations of PDFs around Vredefort to the results of our simulations of impacts by projectiles of various sizes. These simulations indicate that a rocky projectile with a diameter of ～10 km, impacting vertically at a velocity of 20 km/s generates shock pressures that are consistent with the distribution of PDFs around Vredefort. These projectile parameters correspond to a transient crater ～80 km in diameter or a final crater ～120–160 km in diameter. Allowing for uncertainties in our modeling procedures, we consider final craters 120 to 200 km in diameter to be consistent with the observed locations of PDFs at Vredefort. The shock pressure contour corresponding to the formation of shatter cones is almost horizontal near the surface, making the locations of these features less useful constraints on the crater size. However, they may provide a constraint on the amount of erosion that has occurred since the impact.  相似文献   

9.
Abstract– Although the meteorite impact origin of the Keurusselkä impact structure (central Finland) has been established on the basis of the occurrence of shatter cones, no detailed microscopic examination of the impactites from this structure has so far been made. Previous microscope investigations of in situ rocks did not yield any firm evidence of shock features (Raiskila et al. 2008; Kinnunen and Hietala 2009). We have carried out microscopic observations on petrographic thin sections from seven in situ shatter cone samples and report here the discovery of planar fractures (PFs) and planar deformation features (PDFs) in quartz and feldspar grains. The detection and characterization of microscopic shock metamorphic features in the investigated samples substantiates a meteorite impact origin for the Keurusselkä structure. The crystallographic orientations of 372 PDF sets in 276 quartz grains were measured, using a universal stage (U‐stage) microscope, for five of the seven distinct shatter cone samples. Based on our U‐stage results, we estimate that investigated shatter cone samples from the Keurusselkä structure have experienced peak shock pressures from approximately 2 GPa to slightly less than 20 GPa for the more heavily shocked samples. The decoration of most of the PDFs with fluid inclusions also indicates that these originally amorphous shock features were altered by postimpact processes. Finally, our field observations indicate that the exposed surface corresponds to the crater floor; it is, however, difficult to estimate the exact diameter of the structure and the precise amount of material that has been eroded since its formation.  相似文献   

10.
Abstract– Vargeão Dome (southern Brazil) is a circular feature formed in lava flows of the Lower Cretaceous Serra Geral Formation and in sandstones of the Paraná Basin. Even though its impact origin was already proposed in the 1980s, little information about its geological and impact features is available in the literature. The structure has a rim‐rim diameter of approximately 12 km and comprises several ring‐like concentric features with multiple concentric lineaments. The presence of a central uplift is suggested by the occurrence of deformed sandstone strata of the Botucatu and Pirambóia formations. We present the morphological/structural characteristics of Vargeão Dome, characterize the different rock types that occur in its interior, mainly brecciated volcanic rocks (BVR) of the Serra Geral Formation, and discuss the deformation and shock features in the volcanic rocks and in sandstones. These features comprise shatter cones in sandstone and basalt, as well as planar microstructures in quartz. A geochemical comparison of the target rock equivalents from outside the structure with the shocked rocks from its interior shows that both the BVRs and the brecciated sandstone have a composition largely similar to that of the corresponding unshocked lithologies. No traces of meteoritic material have been found so far. The results confirm the impact origin of Vargeão Dome, making it one of the largest among the rare impact craters in basaltic targets known on Earth.  相似文献   

11.
Abstract– The Vista Alegre structure, centered at 25°57′S and 52°41′W, has been recently proposed as a meteorite impact structure. The 9.5 km‐diameter structure is located in the Paraná state of southern Brazil, within the Paraná Basin, which contains one of the largest and most extensive flood basalt provinces on Earth. The Paraná flood basalts belong to the Serra Geral Formation and are temporally related to the opening of the South Atlantic Ocean, having been dated at about 133–132 Ma. Tholeiitic basalts dominate the western portion of Paraná state, with some minor rhyodacites. Morphologically, Vista Alegre has a prominent circular outline, in the form of an incomplete ring of escarpments, and an inner depression. The presence of a central uplift is not obvious, but it is inferred by the occurrence of deformed sandstone blocks near the center of the structure. These sandstones are possibly related to the Triassic Pirambóia Formation and/or to the Cretaceous Botucatu Formation. These units are normally at stratigraphic depths of about 700–800 m below the present surface in this portion of the Paraná Basin. The structure appears to be in an advanced erosion stage and its interior is occupied by a soil cover several meters thick, extensively used for agriculture. As a result there are limited outcrops in the interior of the structure, all of polymict breccias, some of them melt‐bearing. We report the extensive occurrence of shatter cones, in the form of fine‐grained rock clasts within the polymict breccias. The shatter cone‐bearing breccias occur at different locations within the structure, separated by several kilometers. The nested shatter cones range in size from about 0.5 to 20 cm for individual cones, and up to half a meter for complete assemblages. The shatter cones formed in fine‐grained Parana flood basalt and might be the first examples of shatter cones in such a rock type. In addition, planar deformation features (PDFs) were found in quartz grains within sedimentary rock clasts of the polymict breccia. These findings confirm the impact origin of the Vista Alegre structure.  相似文献   

12.
Granophyre dykes in the central part of the Vredefort impact structure are believed to be the remnants of the impact melt sheet, which intruded downwards along the fractures in the crater floor. Little is known about their original penetration depth, dip, structural relationships with the host rocks, and their general geophysical characteristics. This information is critical to understand the emplacement history of the granophyre dykes, as it relates to the formation and modification of large impact structures. We conducted magnetic and resistivity surveys across the Daskop granophyre dyke (DGD), one of the impact melt dykes in the structure's core. The magnetic survey revealed that the DGD gives a strong magnetic response at positions where the dyke outcrop exceeds the surface topography, but a very weak response where the outcrop is nearly at the same elevation as the surrounding topography. The magnetic anomaly is thus predominantly due to the outcrop protruding above ground level, suggesting a limited volume of dyke material in the subsurface and a small penetration depth. The resistivity survey performed on two profiles, set perpendicularly across the DGD, indicated a shallow penetration depth (<3 m), consistent with the magnetic interpretation. Thus, our geophysical study demonstrates that the DGD is currently at the very bottom of its original emplacement. This may either be an erosional coincidence, or it may be controlled by a fundamental process of impact cratering. Further studies are warranted to determine if other granophyre dykes at Vredefort are similarly at their lowermost terminations.  相似文献   

13.
Laguna Guatavita (Colombia), a crater 700 m across and 125 m deep containing a central lake, appears not to be a meteorite crater as widely supposed. The tectonic style is not that of an impact site and there is no raised rim or ejected debris. We could find no impactite, shock metamorphic effects or shock fractures (shatter cones). Most likely it is a collapsed crater caused by the solution and withdrawal of salt from an underlying anticline  相似文献   

14.
A total of 184 confirmed impact structures are known on Earth to date, as registered by the Earth Impact Database . The discovery of new impact structures has progressed in recent years at a rather low rate of about two structures per year. Here, we introduce the discovery of the approximately 10 km diameter Santa Marta impact structure in Piauí State in northeastern Brazil. Santa Marta is a moderately sized complex crater structure, with a raised rim and an off‐center, approximately 3.2 km wide central elevated area interpreted to coincide with the central uplift of the impact structure. The Santa Marta structure was first recognized in remote sensing imagery and, later, by distinct gravity and magnetic anomalies. Here, we provide results obtained during the first detailed ground survey. The Bouguer anomaly map shows a transition from a positive to a negative anomaly within the structure along a NE–SW trend, which may be associated with the basement signature and in parts with the signature developed after the crater was formed. Macroscopic evidence for impact in the form of shatter cones has been found in situ at the base around the central elevated plateau, and also in the interior of fractured conglomerate boulders occurring on the floor of the surrounding annular basin. Planar deformation features (PDFs) are abundant in sandstones of the central elevated plateau and at scattered locations in the inner part of the ring syncline. Together, shatter cones and PDFs provide definitive shock evidence that confirms the impact origin of Santa Marta. Crystallographic orientations of PDFs occurring in multiple sets in quartz grains are indicative of peak shock pressures of 20–25 GPa in the rocks exposed at present in the interior of the crater. In contrast to recent studies that have used additional, and sometimes highly controversial, alleged shock recognition features, Santa Marta was identified based on well‐understood, traditional shock evidence.  相似文献   

15.
Kamil is a 45 m diameter impact crater identified in 2008 in southern Egypt. It was generated by the hypervelocity impact of the Gebel Kamil iron meteorite on a sedimentary target, namely layered sandstones with subhorizontal bedding. We have carried out a petrographic study of samples from the crater wall and ejecta deposits collected during our first geophysical campaign (February 2010) in order to investigate shock effects recorded in these rocks. Ejecta samples reveal a wide range of shock features common in quartz‐rich target rocks. They have been divided into two categories, as a function of their abundance at thin section scale: (1) pervasive shock features (the most abundant), including fracturing, planar deformation features, and impact melt lapilli and bombs, and (2) localized shock features (the least abundant) including high‐pressure phases and localized impact melting in the form of intergranular melt, melt veins, and melt films in shatter cones. In particular, Kamil crater is the smallest impact crater where shatter cones, coesite, stishovite, diamond, and melt veins have been reported. Based on experimental calibrations reported in the literature, pervasive shock features suggest that the maximum shock pressure was between 30 and 60 GPa. Using the planar impact approximation, we calculate a vertical component of the impact velocity of at least 3.5 km s?1. The wide range of shock features and their freshness make Kamil a natural laboratory for studying impact cratering and shock deformation processes in small impact structures.  相似文献   

16.
Abstract— The Vredefort Granophyre represents impact melt that was injected downward into fractures in the floor of the Vredefort impact structure, South Africa. This unit contains inclusions of country rock that were derived from different locations within the impact structure and are predominantly composed of quartzite, feldspathic quartzite, arkose, and granitic material with minor proportions of shale and epidiorite. Two of the least recrystallized inclusions contain quartz with single or multiple sets of planar deformation features. Quartz grains in other inclusions display a vermicular texture, which is reminiscent of checkerboard feldspar. Feldspars range from large, twinned crystals in some inclusions to fine‐grained aggregates that apparently are the product of decomposition of larger primary crystals. In rare inclusions, a mafic mineral, probably biotite or amphibole, has been transformed to very fine‐grained aggregates of secondary phases that include small euhedral crystals of Fe‐rich spinel. These data indicate that inclusions within the Vredefort Granophyre were exposed to shock pressures ranging from <5 to 8–30 GPa. Many of these inclusions contain small, rounded melt pockets composed of a groundmass of devitrified or metamorphosed glass containing microlites of a variety of minerals, including K‐feldspar, quartz, augite, low‐Ca pyroxene, and magnetite. The composition of this devitrified glass varies from inclusion to inclusion, but is generally consistent with a mixture of quartz and feldspar with minor proportions of mafic minerals. In the case of granitoid inclusions, melt pockets commonly occur at the boundaries between feldspar and quartz grains. In metasedimentary inclusions, some of these melt pockets contain remnants of partially melted feldspar grains. These melt pockets may have formed by eutectic melting caused by inclusion of these fragments in the hot (650 to 1610 °C) impact melt that crystallized to form the Vredefort Granophyre.  相似文献   

17.
Abstract– The processes leading to formation of sometimes massive occurrences of pseudotachylitic breccia (PTB) in impact structures have been strongly debated for decades. Variably an origin of these pseudotachylite (friction melt)‐like breccias by (1) shearing (friction melting); (2) so‐called shock compression melting (with or without a shear component) immediately after shock propagation through the target; (3) decompression melting related to rapid uplift of crustal material due to central uplift formation; (4) combinations of these processes; or (5) intrusion of allochthonous impact melt from a coherent melt body has been advocated. Our investigations of these enigmatic breccias involve detailed multidisciplinary analysis of millimeter‐ to meter‐sized occurrences from the type location, the Vredefort Dome. This complex Archean to early Proterozoic terrane constitutes the central uplift of the originally >250 km diameter Vredefort impact structure in South Africa. Previously, results of microstructural and microchemical investigations have indicated that formation of very small veinlets involved local melting, likely during the early shock compression phase. However, for larger veins and networks it was so far not possible to isolate a specific melt‐forming mechanism. Macroscopic to microscopic evidence for friction melting is very limited, and so far chemical results have not directly supported PTB generation by intrusion of impact melt. On the other hand, evidence for filling of dilational sites with melt is abundant. Herein, we present a new approach to the mysterium of PTB formation based on volumetric melt breccia calculations. The foundation for this is the detailed analysis of a 1.5 × 3 × 0.04 m polished granite slab from a dimension‐stone quarry in the core of the Vredefort Dome. This slab contains a 37.5 dm3 breccia zone. The pure melt volume in 0.1 m3 PTB‐bearing granitic target rock outside of the several‐decimeter‐wide breccia zone in the granite slab was estimated at 5.2 dm3. This amount can be divided into 4.6 dm3 melt (88%), for which we have evidenced a limited material transport (at maximum, ≈20 cm) and 0.6 dm3 melt (12%) with, at most, grain‐scale material transport, which we consider in situ formed shock melt. The breccia zone itself contains about 10 dm3 of matrix (melt). Assuming melt exchange over 20 cm at the slab surface, between breccia zone and surrounding melt‐bearing host rock volume, the outer melt volume is calculated to contain the same amount of melt as contained by the massive breccia zone. Meso‐ and microscopic observations indicate melt transport is more prominent from larger into smaller melt occurrences. Thus, melt of the breccia zone could have provided the melt fill for all the small‐scale PTB veins in the surrounding target rock. Extrapolating this melt capacity calculation for 1 m3 PTB‐bearing host rock shows that a host rock volume of this dimension is able to take up some 52 dm3 melt. Scaling up 1000‐fold to the outcrop scale reveals that exchange between a host rock volume of 2 m radius around a 37 m3 breccia zone could involve some 10 m3 melt. These results demonstrate that large melt volumes (i.e., large breccia zones) can be derived, in principle, from local reservoirs. However, strong decompression would have to apply in order to exchange these considerable melt volumes, which would only be realistic during the decompression phase of impact cratering upon central uplift formation, or locally where compressive regimes acted during the subsequent down‐ and outward collapse of the central uplift.  相似文献   

18.
Abstract– Serra da Cangalha is a complex impact structure with a crater diameter of 13,700 m and a central uplift diameter of 5800 m. New findings of shatter cones, planar fractures, feather features, and possible planar deformation features are presented. Several ring‐like features that are visible on remote sensing imagery are caused by selective erosion of tilted strata. The target at Serra da Cangalha is composed of Devonian to Permian sedimentary rocks, mainly sandstones that are interlayered with siltstone and claystones. NNE–SSW and WNW–ESE‐striking joint sets were present prior to the impact and also overprinted the structure after its formation. As preferred zones of weakness, these joint sets partly controlled the shape of the outer perimeter of the structure and, in particular, affected the deformation within the central uplift. Joints in radial orientation to the impact center did not undergo a change in orientation during tilting of strata when the central uplift was formed. These planes were used as major displacement zones. The asymmetry of the central uplift, with preferred overturning of strata in the northern to western sector, may suggest a moderately oblique impact from a southerly direction. Buckle folding of tilted strata, as well as strata overturning, indicates that the central uplift became gravitationally unstable at the end of crater formation.  相似文献   

19.
In 2011, the discovery of shatter cones confirmed the 28 km diameter Tunnunik complex impact structure, Northwest Territories, Canada. This study presents the first results of ground‐based electromagnetic, gravimetric, and magnetic surveys over this impact structure. Its central area is characterized by a ~10 km wide negative gravity anomaly of about 3 mGal amplitude, roughly corresponding to the area of shatter cones, and associated with a positive magnetic field anomaly of ~120 nT amplitude and 3 km wavelength. The latter correlates well with the location of the deepest uplifted strata, an impact‐tilted Proterozoic dolomite layer of the Shaler Supergroup exposed near the center of the structure and intruded by dolerite dykes. Locally, electromagnetic field data unveil a conductive superficial formation which corresponds to an 80–100 m thick sand layer covering the impact structure. Based on the measurements of magnetic properties of rock samples, we model the source of the magnetic anomaly as the magnetic sediments of the Shaler Supergroup combined with a core of uplifted crystalline basement with enhanced magnetization. More classically, the low gravity signature is attributed to a reduction in density measured on the brecciated target rocks and to the isolated sand formations. However, the present‐day fractured zone does not extend deeper than ~1 km in our model, indicating a possible 1.5 km of erosion since the time of impact, about 430 Ma ago.  相似文献   

20.
Abstract— The 80 km wide Vredefort dome presents a unique opportunity to investigate the deep levels of the central uplift of a very large impact structure. Exposure of progressively older strata in the collar of the dome and of progressively higher‐grade metamorphic rocks toward its center is consistent with differential uplift; however, the deepest levels exposed correspond to pre‐impact midcrust, rather than lower crust, as has been suggested previously. Pre‐impact Archean gneissic fabrics in the core of the dome are differentially rotated, with the angle of rotation increasing sharply at a distance of ?16–19 km from the center. The present asymmetric dips of the collar strata, with layering dipping outward at moderate angles in the southeastern sector but being overturned and dipping inward in the northwestern sector, and the eccentric distribution of the pre‐impact metamorphic isograds around the core of the dome can be reconciled with symmetric rotation of an initially obliquely NW‐dipping target sequence during central uplift formation. The rocks in the core of the dome lack distinctive megablocks or large‐slip‐magnitude faults such as have been described in other central uplifts. We suggest that the large‐scale coherent response of these rocks to the central uplift formation could have been accommodated by small‐scale shear and/or rotation along pervasive pseudotachylitic breccia vein‐fractures.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号