首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Summary Fluid inclusions in rock forming quartz and in quartz from veins and Alpine fissures from eclogites and glaucophane bearing rocks of the southern Grossvenediger area as well as from amphibolitized eclogites and calcareous mica schists from the Grossglockner area (Austria) have been studied by microthermometry. The oldest fluid inclusions in the eclogites contain only CO2 and are characterized by a very high density up to 1.15 g/cm3. From eclogite forming temperatures in the range of 500 to 550°C a trapping pressure of about 8 kb results for these inclusions. This pressure is in good agreement with that derived from the eclogite-forming mineral reactions. The amphibolites formed by retrogressive metamorphism from the eclogites show fluid inclusions containing H2O and CO2, the densities of the CO2 being much lower compared to those of the fluid inclusions from the unaltered eclogites.
Die fluide Phase in den Eklogiten, den glaukophanführenden Gesteinen und den Amphiboliten des zentralen Tauernfensters abgeleitet aus der Untersuchung der Flüssigkeitseinschlüsse
Zusammenfassung Es wurden die Flüssigkeitseinschlüsse von Gesteins- und Kluftquarzen aus den Eklogiten und glaukophanführenden Gesteinen des südlichen Großvenedigergebietes und aus Granatamphiboliten und Kalkglimmerschiefern aus dem Bereich des Großglockners (Österreich) mikrothermometrisch untersucht.Die ältesten Flüssigkeitseinschlüsse der Eklogite bestehen nur aus CO2 mit einer sehr hohen Dichte bis 1.15 g/cm3. Aus dieser Dichte und den Temperaturen der eklogitbildenden Mineralreaktionen kann für diese nur CO2 enthaltenden Einschlüsse ein Einschließungsdruck von etwa 8 kb errechnet werden, der mit den aus den Mineralreaktionen in den Eklogiten abgeleiteten Druckwerten übereinstimmt.Die aus Eklogiten durch Diaphtorese hervorgegangenen Amphibolite aus dem Gebiet des Großglockners enthalten keine CO2-Einschlüsse hoher Dichte mehr. Es treten dort ausschließlich CO2- und H2O-führende Einschlüsse auf. Das CO2 dieser Einschlüsse hat eine deutlich niedrigere Dichte als das CO2 der Einschlüsse in den Eklogiten.

With 2 Figures  相似文献   

2.
A combined oxygen‐isotope and fluid‐inclusion study has been carried out on high‐ and ultrahigh‐pressure metamorphic (HP/UHPM) eclogites and garnet clinopyroxenite from the Dabie‐Sulu terranes in eastern China. Coesite‐bearing eclogites/garnet clinopyroxenite and quartz eclogites have a wide range in whole‐rock δ18OVSMOW, from 0 to 11‰. The high‐T oxygen‐isotope fractionations preserved between quartz and garnet preclude significant retrograde isotope exchange during exhumation, and the wide range in whole‐rock oxygen‐isotope composition is thought to be a presubduction signature of the precursors. Aqueous fluids with variable salinities and gas species (N2‐, CO2‐, or CH4‐rich), are trapped as primary inclusions in garnet, omphacite and epidote, and in quartz blebs enclosed within eclogitic minerals. In high‐δ18O HP/UHPM rocks from Hujialin and Shima, high‐salinity brine and/or N2 inclusions occur in garnet porphyroblasts, which also contain inclusions of coesite, Cl‐rich blue amphibole and dolomite. In contrast, in low‐δ18O eclogites from Qinglongshan and Huangzhen, the Cl concentrations in amphibole are very low, < 0.2 wt.%, and low‐salinity aqueous inclusions occur in quartz inclusions in epidote porphyroblasts and in epidote cores. These low‐salinity fluid inclusions are believed to be remnants of meteoric water, although the fluid composition was modified during pre‐ and syn‐peak HP/UHPM. Eclogites at Houshuichegou and Hetang contain CH4‐rich fluid inclusions, coexisting with high‐salinity brine inclusions. Methane was probably formed under the influence of CO2‐rich aqueous fluids during serpentinisation of mantle‐derived peridotites prior to or during plate subduction. Remnants of premetamorphic low‐ to high‐salinity aqueous fluid with minor N2 and/or other gas species preserved in the Dabie‐Sulu HP/UHPM eclogites and garnet clinopyroxenite indicate a great diversity of initial fluid composition in the precursors, implying very limited fluid–rock interaction during syn‐ and post‐peak HP/UHPM.  相似文献   

3.
Orthopyroxene, clinopyroxene, and olivine from a metasomatized mantle xenolith of garnet lherzolite in alkaline rocks at the Jetty Oasis, East Antarctica, contain numerous carbon dioxide-dominated composite melt-fluid and fluidized sulfide-silicate (±carbonate) inclusions. Although the maximum pressure under which the inclusions were captured by rock-forming minerals was evaluated at 13 kbar, its actual value should have been much higher, judging by the fact that the inclusions have lost part of their material (decrepitated) when the xenolith was brought to the surface. Two major fluid populations are distinguished. The fluids entrapped during the earlier episode have a more complicated composition. Dominated by CO2, these fluids contain much N2 (0.1–0.2 mole fractions), H2S, and perhaps, also H2O and are hosted by sulfide-silicate (±carbonate) inclusions produced by liquid immiscibility. As these inclusions evolved, they enriched in CO2 and depleted in H2S and N2. Although the concentrations of N2, H2S, and H2O were generally relatively low, these components played an important role in mantle metasomatism, as is reflected in the geochemistry of the derived magmas. The fluids of the younger episode (pressures lower than 7 kbar) are notably richer not only in CO2 but also in H2O (up to the appearance of inclusions with a liquid aqueous phase and the formation of CO2 gas hydrate when cooled in a cryometric stage by liquid N2). The effect of fluids on the mantle source in two discrete episodes is also confirmed by isotopic-geochemical data. Isotopic data on gases obtained immediately from fluid inclusions in minerals by the stepwise crushing technique provide evidence of the evolution of elemental and isotopic ratios of the gases in the course of the metasomatic processes. The high-pressure fluid inclusions of the earlier episode have low C/N2, C/Ar, and N2/Ar ratios, isotopically heavy N2, and somewhat elevated (to 530) 40Ar/36Ar ratios. The younger fluids typically have higher (by two to three orders of magnitude) C/N2 and C/Ar ratios, lower δ13C of CO2, and N2/Ar and 40Ar/36Ar ratios close to the atmospheric values. The nitrogen and argon isotopic compositions and elemental ratios suggest that the younger fluids could have been produced by two-component mixing in the mantle-atmosphere system. Comprehensive analysis of the data and in particular the 40Ar/36Ar ratios, which are atypical of the mantle, and an increase in the H2O concentration, suggests a subduction-related nature of the fluids.  相似文献   

4.
Plagioclase-bearing garnet-omphacite (Grt-Omp) eclogites and garnet-augite eclogite-like (Grt-Aug) schists from the amphibolite and gneiss beds of the Belomorian Mobile Belt have been studied. They are spread over a large area. In most of the studied objects, these rocks have preserved primary concordant relations with the host amphibolite and gneiss strata; they are not disturbed by late tectonic processes and are not genetically related to tectonic-melange zones. Their protoliths were amphibolite lenses in gneisses or large mafic zones composed of amphibolites. The Grt-Omp eclogites formed in the low-pressure field of the eclogite facies (P = 12.5-13.0 kbar, T = 600-630 °C), and the eclogite-like Grt-Aug rocks, at the boundary between the amphibolite and eclogite facies (P = 9.6-11.1 kbar, T = 630-700 °C), under the intense impact of metamorphic fluid on the amphibolites. The compositional evolution of the rock-forming minerals during the formation of Grt-Omp eclogites and eclogite-like Grt-Aug rocks followed the same scheme. The petrographic diversity of apoamphibolite rocks (Grt-Omp eclogites and Grt-Aug schists) might be due to the difference both in the bulk composition of the metabasic protolith and in the ratios of CaO and Na2O activities in the metamorphic fluid. The relatively low content of CaO leads to the formation of Grt-Omp paragenesis in eclogites. Higher CaO contents give rise to eclogite-like Grt-Aug rocks containing jadeite-poor clinopyroxene.  相似文献   

5.
Abstract The Berzosa fault is a major ductile shear zone, the Berzosa Shear Zone (BSZ), which separates the ‘Ollo de Sapo’anticline from the inner higher-grade crystalline axis of the Iberian Hercynian Belt. This shear zone is the site of abundant early kinematic quartz (± Al-silicates) segregations, rich in fluid inclusions. Host rocks are medium-grade staurolite schists and sillimanite gneisses. Fluid inclusions in selected quartz segregations across the Berzosa shear zone have been studied by microthermometric methods as well as, in some instances, by Raman analysis. The recorded fluid inclusion history begins at the end of an intense secondary recrystallization period during late-peak metamorphic conditions and lasts until late in the uplift history of the zone. Three types of inclusions have been found, which in a time sequence are: CO2± H2O; H2O+salt (B-type); and, N2+CH4. Three types of B inclusion may be distinguished in turn, depending on whether they were trapped during an earlier dynamic-recovery phase (B1-type), formed later as intergranular trails (B2-type), or were trapped apparently along with N2+CH4 in clusions from a heterogeneous fluid (B3-type). Considerations from isochores confirm that CO2± H2O inclusions were trapped during late-peak and high-T retrograde metamorphic conditions (in the range 650–500°C and 5–2 kbar), whilst N2+CH4 inclusions, along with the B3-type of inclusions, formed at low-pressures (<1 kbar) and temperatures (± 300°C). B2-type inclusions were trapped chronologically between these two in a period in which strong inverse lateral thermal gradients developed in the zone. Inferred P-T paths for the area are convex to the T-axis.  相似文献   

6.
Fluid inclusions have been studied in three pegmatite fields in Galicia, NW Iberian Peninsula. Based on microthermometry and Raman spectroscopy, eight fluid systems have been recognized. The first fluid may be considered to be a pegmatitic fluid which is represented by daughter mineral (silicates)-rich aqueous inclusions. These inclusions are primary and formed above 500 °C (dissolution of daughter minerals). During pegmatite crystallization, this fluid evolved to a low-density, volatile-rich aqueous fluid with low salinity (93% H2O; 5% CO2; 0.5% CH4; 0.2% N2; 1.3% NaCl) at minimum P–T conditions around 3 ± 0.5 kbar and 420 °C. This fluid is related to rare-metal mineralization. The volatile enrichment may be due to mixing of magmatic fluids and fluids equilibrated with the host rock. A drop in pressure from 3 ± 0.5 to 1 kbar at a temperature above 420 °C, which may be due to the transition from predominantly lithostatic to hydrostatic pressure, is recorded by two-phase, water-rich inclusions with a low-density vapour phase (CO2, CH4 and N2). Another inclusion type is represented by two-phase, vapour-rich inclusions with a low-density vapour phase (CO2, CH4 and N2), indicating a last stage of decreasing temperature (360 °C) and pressure (around 0.5 kbar), probably due to progressive exhumation. Finally, volatile (CO2)-rich aqueous inclusions, aqueous inclusions (H2O-NaCl) and mixed-salt aqueous inclusions with low Th, are secondary in charac- ter and represent independent episodes of hydrothermal fluid circulation below 310 °C and 0.5 kbar. Received: 14 October 1999 / Accepted: 5 October 1999  相似文献   

7.
Primary multiphase brine fluid inclusions in omphacite and garnet from low‐ to medium‐temperature eclogites have been analysed for Cl, Br, I, F, Li and SO4. Halogen contents and ratios provide information about trapped lower crustal fluids, even though the major element (Na, K, Ca) contents of inclusion fluids have been modified by fluid–mineral interactions and (step‐) daughter‐crystal formation after trapping. Halogens in the inclusion fluids were analysed with crush–leach techniques. Cl/Br and Cl/I mass ratios of eclogite fluids are in the range 31–395 and 5000–33 000, respectively. Most fluids have a Cl/Br ratio lower than modern seawater and a Cl/I ratio one order of magnitude lower than modern seawater. Fluids with the lowest Cl/Br and highest Cl/I ratios come from an eclogite that formed by hydration of granulite facies rocks, and may indicate that Br and I are fractionated into hydrous minerals. Reconstructions indicate that the inclusion fluids originally contained 500–4000 ppm Br, 1–14 ppm I and 33–438 ppm Li. Electron microprobe analyses of eclogite facies amphibole, biotite, phengite and apatite indicate that F and Cl fractionate most strongly between phengite (F/Cl mass ratio of 1469 ± 1048) and fluid (F/Cl mass ratio of 0.008), and the least between amphibole and fluid. The chemical evolution of Cl and Br in pore fluids during hydration reactions is in many ways analogous to Cl and Br in seawater during evaporation: the Cl/Br ratio remains constant until the aH2O value is sufficiently lowered for Cl to be removed from solution by incorporation into hydrous minerals.  相似文献   

8.
张灵敏  刘景波  程南飞  叶凯  郭顺  陈意  毛骞 《岩石学报》2013,29(5):1525-1539
流体的盐度对含羟基变质矿物组合的稳定温压条件和岩石-流体的相互作用有重要影响.流体的盐度可从矿物中氯含量的角度加以研究.磷灰石是一个含氯矿物,作为副矿物广泛分布在各种岩石中,且能在较宽的温压范围内稳定存在.本文选择大别-苏鲁造山带中典型的高压、超高压岩石开展了磷灰石成分的研究,结合前人流体包裹体的研究结果,探讨了榴辉岩相条件下流体盐度和磷灰石中的氯含量之间的关系.榴辉岩和脉体中磷灰石的XClAp/XOHAp比值与已有的流体包裹体盐度呈很好的线性正相关.榴辉岩和脉体中磷灰石的XClAp/XoHAp比值范围为0.00～0.35时,对应的流体包裹体盐度约为0～40％ NaCleqv.  相似文献   

9.
The data obtained on melt and fluid inclusions in minerals of granites, metasomatic rocks, and veins with tin ore mineralization at the Industrial’noe deposit in the southern part of the Omsukchan trough, northeastern Russia, indicate that the melt from which the quartz of the granites crystallized contained globules of salt melts. Silicate melt inclusions were used to determine the principal parameters of the magmatic melts that formed the granites, which had temperatures at 760–1020°C, were under pressures of 0.3–3.6 kbar, and had densities of 2.11–2.60 g/cm3 and water concentrations of 1.7–7.0 wt %. The results obtained on the fluid inclusions testify that the parameters of the mineral-forming fluids broadly varied and corresponded to temperatures at 920–275°C, pressures 0.1–3.1 kbar, densities of 0.70–1.90 g/cm3, and salinities of 4.0–75.0 wt % equiv. NaCl. Electron microprobe analyses of the glasses of twelve homogenized inclusions show concentrations of major components typical of an acid magmatic melt (wt %, average): 73.2% SiO2, 15.3% Al2O3, 1.3% FeO, 0.6% CaO, 3.1% Na2O, and 4.5% K2O at elevated concentrations of Cl (up to 0.51 wt %, average 0.31 wt %). The concentrations and distribution of some elements (Cl, K, Ca, Mn, Fe, Cu, Zn, Pb, As, Br, Rb, Sr, and Sn) in polyphase salt globules in quartz from both the granites and a mineralized miarolitic cavity in granite were assayed by micro-PIXE (proton-induced X-ray emission). Analyses of eight salt globules in quartz from the granites point to high concentrations (average, wt %) of Cl (27.5), Fe (9.7), Cu (7.2), Mn (1.1), Zn (0.66), Pb (0.37) and (average, ppm) As (2020), Rb (1850), Sr (1090), and Br (990). The salt globules in the miarolitic quartz are rich in (average of 29 globules, wt %) Cl (25.0), Fe (5.4), Mn (1.0), Zn (0.50), Pb (0.24) and (ppm) Rb (810), Sn (540), and Br (470). The synthesis of all data obtained on melt and fluid inclusions in minerals from the Industrial’noe deposit suggest that the genesis of the tin ore mineralization was related to the crystallization of acid magmatic melts. Original Russian Text@ V.B. Naumov, V.S. Kamenetsky, 2006, published in Geokhimiya, 2006, No. 12, pp. 1279–1289.  相似文献   

10.
Calcite in schists of the metamorphic complex at Naxos is depleted both in 13C and in 18O with respect to massive marbles. This effect is attributed to isotope exchange with circulating CO2-rich fluids, which had an >0.5 according to fluid inclusions. The carbon isotopic composition of the calcites is close to equilibrium with fluid inclusion CO2 at metamorphic temperatures. Mass balance calculations assuming initial 13C values of 0 for calcite and –5 for the fluid, give integrated fluid/rock volume ratios between 0.1 and 2.0. Such high fluid/rock ratios are supported by observations on the distribution of CO2/H2O ratios of fluid inclusions, carbon isotopic compositions of fluid inclusion CO2 and oxygen isotope systematics of silicates.  相似文献   

11.
Halogen ratios (Br/Cl and I/Cl) and concentrations provide important information about how sedimentary formation waters acquire their salinity, but the possible influence of organic Br derived from sedimentary wall-rocks is rarely quantified. Here, it is demonstrated that Br/Cl versus I/Cl mixing diagrams can be used to deconvolve organic Br contributions; that organic matter has a limited range of Br/I ratios; and that organic Br is a more significant component in Zn–Pb deposit ore fluids than previously recognised. The significance of these findings is illustrated for the Lennard Shelf Zn–Pb deposits of Western Australia.Fluid inclusions related to Lennard Shelf Zn–Pb mineralisation have variable salinity and hydrocarbon contents. The halogen data from these fluid inclusions require mixing of three fluid end-members: (1) an evaporated seawater bittern brine (30 wt.% NaCl equiv.) with greater than seawater Br/Cl ratio; (2) a lower salinity pore fluid (?5 wt.% NaCl equiv.) with moderately elevated Br/Cl and I/Cl; and (3) fluids with Br/Cl ratios of ～5 times seawater and extremely elevated I/Cl ratios of ～11,500 times seawater. The first two fluids have 40Ar/36Ar of 300–400 and greater than air saturated water 36Ar concentrations that are typical of fluid inclusions related to Zn–Pb mineralisation. The third ‘organic-rich’ fluid has the highest 40Ar/36Ar ratio of up to 1500 and a depleted 36Ar concentration.Mineralisation is interpreted to have resulted from mixing of Zn-rich evaporitic brines and H2S present in hydrocarbons. It is suggested that aqueous fluids acquired organic Br and I from hydrocarbons, and that hydrocarbons exsolving from the aqueous fluid removed noble gases from solution. Interaction of variably saline brines and hydrocarbons could account for the variable Br/Cl and I/Cl composition, and 36Ar concentrations, recorded by Lennard Shelf fluid inclusions. The distinct 40Ar/36Ar signature of the fluid with the highest I/Cl ratio suggests the hydrocarbons and brines were sourced independently from different parts of the sedimentary basin. These data indicate the complementary nature of halogen and noble gas analysis and provide new constraints on important mixing processes during sediment-hosted Zn–Pb mineralisation.  相似文献   

12.
《Lithos》1986,19(1):1-10
Forming the southwestern segment of the Precambrian granulite facies terrain of the Indian shield, the Kerala region largely comprises charnockites, khondalites and migmatitic gneisses. Fluid inclusions in quartz from the charnockites show distinct distribution patterns consistent with three generations of inclusions. The early monophase type records entrapment of high-density CO2-rich fluid (0.95–1.0 g cm−3). A subsequent monophase type with lower-density CO2-rich fluid (0.65–0.75 g cm−3) coexists with CO2H2O inclusions having an average degree of filling of 0.2 (H2O = 20%; CO2 = 80%). Late aqueous biphase inclusions show coexistence with a second category of CO2H2O inclusions showing a degree of filling of 0.6 (H2O = 60%; CO2 = 40%). The CO2-isochores for early carbonic inclusions yield a pressure range of 4.6–6.1 kbar at granulite facies temperatures of 650–800°C, depicting the entrapment of fluids present during or close to the peak metamorphic stage. A definite sequence of fluid evolution is traceable for the subsequent stages. Thus, the coexisting CO2 and CO2H2O inclusions were entrapped at 510°C and 2.2 kbar, marking the waning of carbonic regime and the beginning of aqueous regime. At 330°C and 0.4 kbar, fluid unmixing occurred, leading to the simultaneous entrapment of mixed CO2H2O and H2O inclusions along rehealed microfractures. The data presented indicate that the metamorphic fluids evolved from early high-density carbonic through mixed carbonic-aqueous to late aqueous types. The dry granulite mineral assemblage of charnockites is a result of metamorphic equilibration under water-deficient and high-PCO2 conditions.  相似文献   

13.
A microthermometric study of inclusions in granites and pegmatites in the Proterozoic Harney Peak Granite system identified four types of inclusions. Type 1 inclusions are mixtures of CO2 and H2O and have low salinities, on average 3.5 wt.% NaCleq; type 2 inclusions are aqueous solutions of variable salinities, from 0 to 40% wt.% NaCleq; type 3 inclusions are carbonic, dominated by CO2, with no detectable water; and type 4 inclusions consist of 20 to 100% solids, with the remaining volume occupied by a CO2-H2O fluid. Many inclusions have a secondary character; however, a primary character can be unambiguously established in several occurrences of the type 1 inclusions. These inclusions were trapped above the solidus and represent the exsolved magmatic fluid. The secondary populations of types 1, 2, and 3 probably formed as a result of reequilibration and unmixing of the type 1 fluid that progressively changed composition and density with decreasing temperature and pressure and was finally trapped along healed microfractures under subsolidus conditions. Type 4 inclusions are primary and are interpreted to be trapped, fluid-bearing, complex silicate melts that subsequently solidified or underwent other posttrapping changes.It is demonstrated that primary type 1 fluid inclusions that coexist with crystallized melt inclusions in the complex, Li-bearing Tin Mountain pegmatite were trapped along the two-fluid phase boundary in the system CO2-H2O-NaCleq. Consequently, the temperature and pressure conditions of trapping are identical to the bulk homogenization conditions—on average 340°C and 2.7 kbar. These conditions indicate that this Li-, Cs-, Rb-, P-, and B-rich pegmatite crystallized at some of the lowest known temperatures for a silicate melt in the crust. An internally consistent, empirical solvus surface in P-T-XCO2 coordinates was generated for the pseudobinary CO2-(H2O-4.3 wt.% NaCleq) pegmatite fluid system. Distribution coefficients for the major species CO2, H2O, NaCl, and CH4 between the immiscible CO2-rich and H2O-rich fluid phases as a function of pressure and temperature were extracted from data for the two cogenetic fluid inclusions types.  相似文献   

14.
Volatiles contribute to magma ascent through the sub-volcanic plumbing system. Here, we investigate melt inclusion compositions in terms of major and trace elements, as well as volatiles (H2O, CO2, SO2, F, Cl, Br, S) for Quaternary Plinian and dome-forming dacite and andesite eruptions in the central and the northern part of Dominica (Lesser Antilles arc). Melt inclusions, hosted in orthopyroxene, clinopyroxene and plagioclase are consistently rhyolitic. Post-entrapment crystallisation effects are limited, and negligible in orthopyroxene-hosted inclusions. Melt inclusions are among the most water-rich yet recorded (≤?8 wt% H2O). CO2 contents are generally low (<?650 ppm), although in general the highest pressure melt inclusion contain the highest CO2. Some low-pressure (<?3 kbars) inclusions have elevated CO2 (up to 1100–1150 ppm), suggestive of fluxing of shallow magmas with CO2-rich fluids. CO2-trace element systematics indicate that melts were volatile-saturated at the time of entrapment and can be used for volatile-saturation barometry. The calculated pressure range (0.8–7.5 kbars) indicates that magmas originate from a vertically-extensive (3–27 km depth) storage zone within the crust that may extend to the sub-Dominica Moho (28 km). The vertically-extensive crustal system is consistent with mush models for sub-volcanic arc crust wherein mantle-derived mafic magmas undergo differentiation over a range of crustal depths. The other volatile range of composition for melt inclusions from the central part is F (75–557 ppm), Cl (1525–3137 ppm), Br (6.1–15.4 ppm) and SO2 (<?140 ppm), and for the northern part it’s F (92–798 ppm), Cl (1506–4428 ppm), Br (not determined) and SO2 (<?569; one value at 1015 ppm). All MIs, regardless of provenance, describe the same Cl/F correlation (8.3?±?2.7), indicating that the magma source at depth is similar. The high H2O content of Dominica magmas has implications for hazard assessment.  相似文献   

15.
Melt and fluid inclusions have been studied in olivine phenocrysts (Fo 81–79) from trachybasalts of the Southern Baikal volcanic area, Dzhida field. The melt inclusions were homogenized, quenched, and analyzed on an electron and ion microprobe. The study of homogenized glasses of nine inclusions showed that basaltic melts (SiO2 = 47.1–50.3 wt %, MgO = 5.0–7.7 wt %, CaO = 7.1–11.1 wt %) have high contents of Al2O3 (17.1–19.6 wt %), Na2O (4.1–6.2 wt %), K2O (2.2–3.3 wt %), and P2O5 (0.6–1.1 wt %). The volatile contents are low (in wt %): 0.24–0.31 H2O, 0.08 F, 0.03 Cl, and 0.02 S. Primary fluid inclusions in olivines from four trachybasalt samples contain high-density CO2 (0.73–0.87 g/cm3), indicating a CO2 fluid pressure of 4.3–6.6 kbar at 1200–1300°C and olivine crystallization depths of 16–24 km. Ion microprobe analyses of 20 glasses from melt inclusions for trace elements showed that the magmas of the Baikal rift were enriched in incompatible elements, thus differing from oceanic rift basalts and resembling oceanic island basalts. A comparison of our data on melt and fluid inclusions in olivine from trachybasalts of the Dzhida field with preexisting data on the Eastern Tuva volcanic highland in the Southern Baikal volcanic area showed that they had similar contents of volatiles, major, and trace elements.  相似文献   

16.
The 1.27 Ga old Ivigtut (Ivittuut) intrusion in South Greenland is world-famous for its hydrothermal cryolite deposit [Na3AlF6] situated within a strongly metasomatised A-type granite stock. This detailed fluid inclusion study characterises the fluid present during the formation of the cryolite deposit and thermodynamic modelling allows to constrain its formation conditions.Microthermometry revealed three different types of inclusions: (1) pure CO2, (2) aqueous-carbonic and (3) saline-aqueous inclusions. Melting temperatures range between − 23 and − 15 °C for type 2 and from − 15 to − 10 °C for type 3 inclusions. Most inclusions homogenise between 110 and 150 °C into the liquid.Stable isotope compositions of CO2 and H2O were measured from crushed inclusions in quartz, cryolite, fluorite and siderite. The δ13C values of about − 5‰ PDB are typical of mantle-derived magmas. The differences between δ18O of CO2 (+ 21 to + 42‰ VSMOW) and δ18O of H2O (− 1 to − 21.7‰ VSMOW) suggest low-temperature isotope exchange. δD (H2O) ranges from − 19 to − 144‰ VSMOW. The isotopic composition of inclusion water closely follows the meteoric water line and is comparable to Canadian Shield brines. Ion chromatography revealed the fluid's predominance in Na, Cl and F. Cl/Br ratios range between 56 and 110 and may imply intensive fluid–rock interaction with the host granite.Isochores deduced from microthermometry in conjunction with estimates for the solidification of the Ivigtut granite suggest a formation pressure of approximately 1–1.5 kbar for the fluid inclusions. Formation temperatures of different types of fluid inclusions vary between 100 and 400 °C. Thermodynamic modelling of phase assemblages and the extraordinary high concentration in F (and Na) may indicate that the cryolite body and its associated fluid inclusions could have formed during the continuous transition from a volatile-rich melt to a solute-rich fluid.  相似文献   

17.
Investigation of fluid inclusions in granitic and cale-silicate gneisses from the Adirondack Mountains, New York, has revealed the presence of various types, including: (1) CO2-rich, (2) mixed H2O–CO2±salt and (3) aqueous inclusions with no visible CO2. Many, if not all, of these inclusions were trapped or modified after the peak of granulite facies metamorphism, as shown by textural relations or by the lack of agreement between the composition of the fluids found in some inclusions and the composition of the peak-metamorphic fluid as estimated from mineral equilibria. Many fluid inclusions record conditions attained during retrograde cooling and uplift, with minimum pressures and temperatures of 2 to 3 kbar and 200 to 300°C. The temperatures and pressures derived from the investigation of these inclusions constrain the retrograde P-T path, and the results indicate that a period of cooling with little or no decompression.  相似文献   

18.
The Khtada Lake. British Columbia, metamorphic complex consists of high grade amphibolite and metasedimentary units with development of gneiss, migmatite and homogeneous autochthonous plutons. Maximum metamorphic conditions are estimated to have exceeded 5 kbar and 700°C.Fluid inclusions in matrix quartz are highly variable in density and composition, ranging from apparently pure CO2 (gas or liquid or both at room temperature) through CO2 + H2O ± CH4 mixtures to inclusions which are entirely aqueous. They occur along cracks, in groups without planar features and as isolated inclusions. The latter and some which occur in groups, are interpreted to most nearly approximate, in density and composition, the fluids present during the peak of metamorphism.The density and fluid composition data are derived from direct observations of phase changes between ? 180 and + 380°C and from the application of published experimental data in the system CH4-CO2-H2O-NaCl. The most dense, pure CO2 inclusions indicate a pressure of entrapment at 5 kbar, if a temperature of 700°C is assumed. This is in close agreement with the minimum P-T estimates from the mineral assemblages. Methane was positively identified in inclusions in graphite-bearing specimens. Salt content is concluded to be about 5–6 wt% NaCl equivalent in the aqueous phase in both aqueous and CO2 + H2O inclusions. There is evidence of immiscible separation of CO2-rich and H2O-rich fluids at temperatures at least as high as 375°C.  相似文献   

19.
Melt and fluid inclusions were investigated in minerals from igneous rocks and ore (Au-Ag-Pb-Zn) veins of the Stiavnica ore field in Central Slovakia. High H2O (7.1–12.0 wt %) and Cl (0.32–0.46 wt %) contents were found in silicate melt inclusions (65–69 wt % SiO2 and 5.2–5.6 wt % K2O) in plagioclase phenocrysts (An 68–36) from biotite-homblende andesites of the eastern part of the caldera. Similar high water contents are characteristic of magmatic melts (71–76 wt % SiO2 and 3.7–5.1 wt % K2O) forming the sanidine rhyolites of the Vyhne extrusive dome in the northwestern part of the Stiavnica caldera (up to 7.1 wt %) and the rhyolites of the Klotilda dike in the eastern part of the ore field (up to 11.5 wt %). The examination of primary inclusions in quartz and sanidine from the Vyhne rhyolites revealed high concentrations of N2 and CO2 in magmatic fluid (8.6 g/kg H2O and 59 g/kg H2O, respectively). Fluid pressure was estimated as 5.0 kbar on the basis of primary CO2 fluid inclusions in plagioclase phenocrysts from the Kalvari basanites. This value corresponds to a depth of 18 km and may be indicative of a deep CO2 source. Quartz from the granodiorites of the central part of the Stiavnica-Hodrusa complex crystallized from a melt with 4.2–6.1 wt % H2O and 0.24–0.80 wt % Cl. Magmatic fluid cogenetic with this silicate melt was represented by a chloride brine with a salinity of no less than 77–80 wt % NaCl equiv. Secondary inclusions in quartz of the igneous rocks recorded a continuous trend of temperature, pressure, and solution salinity, from the parameters of magmatic fluids to the conditions of formation of ore veins. The gold mineralization of the Svyatozar vein system was formed from boiling low-salinity fluids (0.3–8.0 wt % NaCl equv.) at temperatures of 365–160°C and pressures of 160–60 bar. The Terezia, Bieber, Viliam, Spitaler, and Rozalia epithermal gold-silver-base metal veins were also formed from heterogeneous low-salinity fluids (0.3–12.1 wt %) at temperatures of 380–58°C and pressures of 240–10 bar. It was found that the salt components of the solutions were dominated by chlorides (high content of fluorine, up to 0.45 mol/kg H2O, was also detected), and sulfate solutions appeared in the upper levels. The dissolved gas of ore-forming solutions was dominated by CO2 (0.1–8.4 mol %, averaging 1.3 wt %) and contained minor nitrogen (0.00–0.85 mol %, averaging 0.05 mol %) and negligible methane admixtures (0.00–0.05 mol %, averaging 0.004 mol %). These data allowed us to conclude that the magmatic melts could be sources of H2O, Cl, CO2, and N2. The formation of the epithermal mineralization of the Stiavnica ore field was associated with the mixing of magmatic fluid with low-concentration meteoric waters, and the fluid was in a heterogeneous state.  相似文献   

20.
Fluid inclusions in the gold-bearing quartz veins at the Um Rus area are of three types: H2O, H2O−CO2 and CO2 inclusions. H2O inclusions are the most abundant, they include two phases which exhibit low and high homogenization temperatures ranging from 150 to 200°C and 175 to 250°C, respectively. The salinity of aqueous inclusions, based on ice melting, varies between 6.1 and 8 equiv. wt% NaCl. On the other hand, H2O−CO2 fluid inclusions include three phases. Their total homogenization temperatures range from 270 to 325°C, and their salinity, based on clathrate melting, ranges between 0.8 and 3.8 equiv. wt% NaCl. CO2 fluid inclusions homogenize to a liquid phase and exhibit a low density range from 0.52 to 0.66 g/cm3. The partial mixing of H2O−CO2 and salt H2O−NaCl fluid inclusions is the main source of fluids from which the other types of inclusions were derived. The gold-bearing quartz veins are believed to be of medium temperature hydrothermal convective origin.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号