首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
We present 21 focal solutions (magnitude > 5.5) reliably computed by body-wave modelling for the western Hellenic arc from Yugoslavia to the southern Peloponnese. Mechanisms located within the Aegean show normal faulting, the T-axis trending N-S in the centre and parallel to the active boundary in the external part. Mechanisms associated with the Keffalinia fault are consistent with dextral strike-slip motion. Reverse mechanisms located along the active boundary are remarkably consistent and do not depend on the nature of the active boundary (continental collision or oceanic subduction). The consistency in azimuth of the slip vectors and of the GPS velocity relative to Africa, all along the active boundary, suggests that the deformation is related to the same motion. The discrepancy between seismic-energy release and the amount of shortening confirms that the continental collision is achieved by seismic slip on faults but the oceanic subduction is partially aseismic. The northward decrease in velocity between continental collision and oceanic subduction suggests the continental collision to be a recent evolution of the active subduction.  相似文献   

2.
Shear wave splitting measurements from S arrivals of local earthquakes recorded at the Incorporated Research Institutions for Seismology (IRIS) broadband sensor SNZO are used to determine a basic anisotropic structure for the subduction zone in the Wellington region. With the use of high-frequency filters, fast anisotropic polarization ( φ ) and splitting time ( δt ) measurements typical of crustal anisotropy are evident, but the larger splitting expected from the mantle is often not resolved. The small splitting seen agrees well with the results of previous studies concerning shallow crustal anisotropy. With the use of lower-frequency filters, measurements more consistent with mantle anisotropy are made. Anisotropy of 4.4 ± 0.9 per cent with a fast polarization of 29° ± 38° is calculated for the subducting slab, from 20 to 70  km depth. Using this result in addition to the results of previous studies, a model is proposed. The model requires a frequency-dependent anisotropy of less than 1.4 per cent when measured with a period of ~2  s to be present in the sub-slab mantle.
Separate from this population, a band of events in northern Cook Strait with an 86° ± 10° fast polarization is seen. This is at about 40° from the strike of the Hikurangi margin, and suggests a source of shear strain 40° removed from that found in the majority of the region. The cause of this is probably a deformation in the subducting slab in this region, as it moves towards a greater incline to the south.  相似文献   

3.
The Hikurangi Trough, off eastern New Zealand, is at the southern end of the Tonga–Kermadec–Hikurangi subduction system, which merges into a zone of intracontinental transform. The trough is mainly a turbidite-filled structural trench but includes an oblique-collision, foredeep basin. Its northern end has a sharp boundary with the deep, sediment-starved, Kermadec Trench. Swath-mapping, sampling and seismic surveys show modern sediment input is mainly via Kaikoura Canyon, which intercepts littoral drift at the southern, intracontinental apex of the trough, with minor input from seep gullies. Glacial age input was via many canyons and about an order of magnitude greater. Beyond a narrow, gravelly, intracontinental foredeep, the southern trench-basin is characterized by a channel meandering around the seaward edge of mainly Plio-Pleistocene, overbank deposits that reach 5 km in thickness. The aggrading channel has sandy turbidites, but low-backscatter, and long-wavelength bedforms indicating thick flows. Levées on both sides are capped by tangentially aligned mudwaves on the outsides of bends, indicating centrifugal overflow from heads of dense, fast-moving, autosuspension flows. The higher, left-bank levée also has levée-parallel mudwaves, indicating Coriolis and/or boundary currents effects on dilute flows or tail plumes. In the northern trough, basin-fill is generally less than 2 km thick and includes widespread overbank turbidites, a massive, blocky, avalanche deposit and an extensive, buried, debris flow deposit. A line of low seamounts on the subducting plate acts as a dam preventing modern turbidity currents from reaching the Kermadec Trench. Major margin collapse probably occurred in the wake of a large subducting seamount; this seamount and its wake debris flow probably dammed the trench from 2 Ma to 0.5 Ma. Before this, similar dams may have re-routed turbidity currents across the plateau.  相似文献   

4.
Summary. The active Australian-Pacific plate boundary passes through New Zealand. In the north, the Pacific plate subducts beneath the Australian plate with an accretionary wedge forming the eastern continental (Hikurangi) margin of the North Island. The structure of the region behind the Hikurangi margin changes from the extensional back-arc basin under central North Island to a postulated crustal downwarp under the southern North Island. A 100 km long multichannel seismic reflection profile was recorded across the region of crustal downwarp. The data show discontinuous coherent reflectors dipping westwards at the east end of the profile, and east dipping reflectors at the west end, from depths of 9 to 15 s two way time. Simple hand migration of these events indicate that the east dipping reflectors, interpreted as the base of the Australian plate crust, abut against the west dipping reflectors which are interpreted as marking the top of the subducted Pacific plate. Detailed earthquake hypocentre locations in the area show a dipping zone of high seismicity, the top of which coincides closely with the west dipping events, thus supporting this interpretation.  相似文献   

5.
We describe results of an active-source seismology experiment across the Chilean subduction zone at 38.2°S. The seismic sections clearly show the subducted Nazca plate with varying reflectivity. Below the coast the plate interface occurs at 25 km depth as the sharp lower boundary of a 2–5 km thick, highly reflective region, which we interpret as the subduction channel, that is, a zone of subducted material with a velocity gradient with respect to the upper and lower plate. Further downdip along the seismogenic coupling zone the reflectivity decreases in the area of the presumed 1960 Valdivia hypocentre. The plate interface itself can be traced further down to depths of 50–60 km below the Central Valley. We observe strong reflectivity at the plate interface as well as in the continental mantle wedge. The sections also show a segmented forearc crust in the overriding South American plate. Major features in the accretionary wedge, such as the Lanalhue fault zone, can be identified. At the eastern end of the profile a bright west-dipping reflector lies perpendicular to the plate interface and may be linked to the volcanic arc.  相似文献   

6.
Summary. The Azores—Biscay Rise is a roughly linear north-east—south-west trending feature rising 1500–3000m above its surroundings, which extends from about 4°N, 1°30'W towards the Azores. Its south-western termination is near 40°30'N, 21°30'W. About halfway along its length the Rise intersects the WNW-trending King's Trough. In 1978 a set of bathymetric, magnetic, gravity, GLORIA and seismic reflection and refraction data were obtained in the vicinity of the Rise. Together with earlier data these observations suggest that: (1) there has been no substantial post-emplacement tectonic activity, with the possible exception of the construction of some volcanic seamounts at the south-western end of the Rise, and (2) the Rise is underlain by a low-velocity (low-density) lower crust and is in isostatic equilibrium.
The Rise can be convincingly shown to be the eastern half of a pair of ridges formed by abnormal crustal generation at the Mid-Atlantic Ridge crest between the times of anomalies 33 and 24 (76–56 Ma ago). The western counterpart of the Rise includes Gauss and Milne seamounts in the Newfoundland Basin.
Magnetic anomaly 31 passes uninterruptedly across the Rise and therefore hypotheses that the northern part of the Rise was the site of a Cenozoic transform fault or subduction zone are not supported by our data. It is speculated that King's Trough was linked to the North Spanish Trough by an early Cenozoic east—west transform fault across the northern Iberia Abyssal Plain. This plate boundary became inactive about the middle of the Oligocene epoch.  相似文献   

7.
A moderate earthquake of   M w= 6.8  occurred on 2003 December 10. It ruptured the Chihshang Fault in eastern Taiwan which is the most active segment of the Longitudinal fault as a plate suture fault between the Luzon arc of the Philippine Sea plate and the Eurasian plate. The largest coseismic displacements were 13 cm (horizontal) and 26 cm (vertical). We analyse 40 strong motion and 91 GPS data to model the fault geometry and coseismic dislocations. The most realistic shape of the Chihshang fault surface is listric in type. The dipping angle of the seismic zone is steep (about 60°–70°) at depths shallower than 10 km and then gradually decreases to 40°–50° at depths of 20–30 km. Thus the polygonal elements in Poly3D are well suited for modelling complex surfaces with curving boundaries. Using the strong motion data, the displacement reaches 1.2 m dip-slip on the Chihshang Fault and decreases to 0.1 m near surface. The slip averages 0.34 m, releasing a scalar moment of 1.6E26 dyne-cm. For GPS data, our model reveals that the maximal dislocation is 1.8 m dip-slip. The dislocations decrease to 0.1 m near the surface. The average slip is 0.48 m, giving a scalar moment of 2.2E26 dyne-cm. Regarding post-seismic deformation, a displacements of 0.5 m were observed near the Chihshang Fault, indicating the strain had not been totally released, as a probable result of near-surface locking of the fault zone.  相似文献   

8.
Focal mechanisms determined from moment tensor inversion and first motion polarities of the Himalayan Nepal Tibet Seismic Experiment (HIMNT) coupled with previously published solutions show the Himalayan continental collision zone near eastern Nepal is deforming by a variety of styles of deformation. These styles include strike-slip, thrust and normal faulting in the upper and lower crust, but mostly strike-slip faulting near or below the crust–mantle boundary (Moho). One normal faulting earthquake from this experiment accommodates east–west extension beneath the Main Himalayan Thrust of the Lesser Himalaya while three upper crustal normal events on the southern Tibetan Plateau are consistent with east–west extension of the Tibetan crust. Strike-slip earthquakes near the Himalayan Moho at depths >60 km also absorb this continental collision. Shallow plunging P -axes and shallow plunging EW trending T -axes, proxies for the predominant strain orientations, show active shearing at focal depths ∼60–90 km beneath the High Himalaya and southern Tibetan Plateau. Beneath the southern Tibetan Plateau the plunge of the P -axes shift from vertical in the upper crust to mostly horizontal near the crust–mantle boundary, indicating that body forces may play larger role at shallower depths than at deeper depths where plate boundary forces may dominate.  相似文献   

9.
An analysis of the Zihuatanejo, Mexico, earthquake of 1994 December 10 ( M = 6.6), based on teleseismic and near-source data, shows that it was a normal-faulting, intermediate-depth ( H = 50 ± 5 km) event. It was located about 30 km inland, within the subducted Cocos plate. The preferred fault plane has an azimuth of 130°, a dip of 79° and a rake of −86°. The rupture consisted of two subevents which were separated in time by about 2 s, with the second subevent occurring downdip of the first. The measured stress drop was relatively high, requiring a Δσ of about a kilobar to explain the high-frequency level of the near-source spectra. A rough estimate of the thickness of the seismogenic part of the oceanic lithosphere below Zihuatanejo, based on the depth and the rupture extent of this event, is 40 km.
This event and the Oaxaca earthquake of 1931 January 15 ( M = 7.8) are the two significant normal-faulting, intermediate-depth shocks whose epicentres are closest to the coast. Both of these earthquakes were preceded by several large to great shallow, low-angle thrust earthquakes, occurring updip. The observations in other subduction zones show just the opposite: normal-faulting events precede, not succeed, updip, thrust shocks. Indeed, the thrust events, soon after their occurrence, are expected to cause compression in the slab, thus inhibiting the occurrence of normal-faulting events. To explain the occurrence of the Zihuatanejo earthquake, we note that the Cocos plate, after an initial shallow-angle subduction, unbends and becomes subhorizontal. In the region of the unbending, the bottom of the slab is in horizontal extension. We speculate that the large updip seismic slip during shallow, low-angle thrust events increases the buckling of the slab, resulting in an incremental tensional stress at the bottom of the slab and causing normal-faulting earthquakes. This explanation may also hold for the 1931 Oaxaca event.  相似文献   

10.
The Pisco earthquake ( M w 8.0; 2007 August 15) occurred offshore of Peru's southern coast at the subduction interface between the Nazca and South American plates. It ruptured a previously identified seismic gap along the Peruvian margin. We use Wide Swath InSAR observations acquired by the Envisat satellite in descending and ascending orbits to constrain coseismic slip distribution of this subduction earthquake. The data show movement of the coastal regions by as much as 85 cm in the line-of-sight of the satellite. Distributed-slip model indicates that the coseismic slip reaches values of about 5.5 m at a depth of ∼18–20 km. The slip is confined to less than 40 km depth, with most of the moment release located on the shallow parts of the interface above 30 km depth. The region with maximum coseismic slip in the InSAR model is located offshore, close to the seismic moment centroid location. The geodetic estimate of seismic moment is 1.23 × 1021 Nm ( M w 8.06), consistent with seismic estimates. The slip model inferred from the InSAR observations suggests that the Pisco earthquake ruptured only a portion of the seismic gap zone in Peru between 13.5° S and 14.5° S, hence there is still a significant seismic gap to the south of the 2007 event that has not experienced a large earthquake since at least 1687.  相似文献   

11.
We present geological and morphological data, combined with an analysis of seismic reflection lines across the Ionian offshore zone and information on historical earthquakes, in order to yield new constraints on active faulting in southeastern Sicily. This region, one of the most seismically active of the Mediterranean, is affected by WNW–ESE regional extension producing normal faulting of the southern edge of the Siculo–Calabrian rift zone. Our data describe two systems of Quaternary normal faults, characterized by different ages and related to distinct tectonic processes. The older NW–SE-trending normal fault segments developed up to ≈400  kyr ago and, striking perpendicular to the main front of the Maghrebian thrust belt, bound the small basins occurring along the eastern coast of the Hyblean Plateau. The younger fault system is represented by prominent NNW–SSE-trending normal fault segments and extends along the Ionian offshore zone following the NE–SW-trending Avola and Rosolini–Ispica normal faults. These faults are characterized by vertical slip rates of 0.7–3.3  mm  yr −1 and might be associated with the large seismic events of January 1693. We suggest that the main shock of the January 1693 earthquakes ( M ~ 7) could be related to a 45  km long normal fault with a right-lateral component of motion. A long-term net slip rate of about 3.7  mm  yr −1 is calculated, and a recurrence interval of about 550 ± 50  yr is proposed for large events similar to that of January 1693.  相似文献   

12.
Stratigraphic data from petroleum wells and seismic reflection analysis reveal two distinct episodes of subsidence in the southern New Caledonia Trough and deep‐water Taranaki Basin. Tectonic subsidence of ~2.5 km was related to Cretaceous rift faulting and post‐rift thermal subsidence, and ~1.5 km of anomalous passive tectonic subsidence occurred during Cenozoic time. Pure‐shear stretching by factors of up to 2 is estimated for the first phase of subsidence from the exponential decay of post‐rift subsidence. The second subsidence event occured ~40 Ma after rifting ceased, and was not associated with faulting in the upper crust. Eocene subsidence patterns indicate northward tilting of the basin, followed by rapid regional subsidence during the Oligocene and Early Miocene. The resulting basin is 300–500 km wide and over 2000 km long, includes part of Taranaki Basin, and is not easily explained by any classic model of lithosphere deformation or cooling. The spatial scale of the basin, paucity of Cenozoic crustal faulting, and magnitudes of subsidence suggest a regional process that acted from below, probably originating within the upper mantle. This process was likely associated with inception of nearby Australia‐Pacific plate convergence, which ultimately formed the Tonga‐Kermadec subduction zone. Our study demonstrates that shallow‐water environments persisted for longer and their associated sedimentary sequences are hence thicker than would be predicted by any rift basin model that produces such large values of subsidence and an equivalent water depth. We suggest that convective processes within the upper mantle can influence the sedimentary facies distribution and thermal architecture of deep‐water basins, and that not all deep‐water basins are simply the evolved products of the same processes that produce shallow‐water sedimentary basins. This may be particularly true during the inception of subduction zones, and we suggest the term ‘prearc’ basin to describe this tectonic setting.  相似文献   

13.
Summary. There are two conflicting models for the dip of the subduction zone beneath central Peru and beneath central Chile. One model, based primarily on the distribution of hypocentres thought to be most reliably located, postulates a shallow (∼ 10°) dip for the downgoing plate. The second model, re-examined in this paper and based chiefly on an analysis of ScSp converted phases, postulates a normal (∼ 30°) dip for the subduction.
A detailed examination of ScSp data for central Peru and central Chile shows that ScSp arrivals can be identified on all seismograms on which the predicted signal/noise ratio is greater than 1, and the measured amplitude ratios of ScSp to ScS imply a normal dip for the conversion interfaces. The characteristics of the ScSp arrivals in these regions are virtually identical to those for ScSp arrivals in southern Peru, where a well-defined Benioff zone and the calculated ScSp -conversion region both imply a normal dip for the subduction. Hence ScSp observations in South America support the model of an approximately constant dip of subduction from central Peru to central Chile to a depth of at least 120 km, and impose a constraint that must be satisfied by any satisfactory tectonic model for these regions.  相似文献   

14.
Slip rate on the Dead Sea transform fault in northern Araba valley (Jordan)   总被引：11，自引：0，他引：11  
The Araba valley lies between the southern tip of the Dead Sea and the Gulf of Aqaba. This depression, blanketed with alluvial and lacustrine deposits, is cut along its entire length by the Dead Sea fault. In many places the fault is well defined by scarps, and evidence for left-lateral strike-slip faulting is abundant. The slip rate on the fault can be constrained from dated geomorphic features displaced by the fault. A large fan at the mouth of Wadi Dahal has been displaced by about 500 m since the bulk of the fanglomerates were deposited 77–140 kyr ago, as dated from cosmogenic isotope analysis (10Be in chert) of pebbles collected on the fan surface and from the age of transgressive lacustrine sediments capping the fan. Holocene alluvial surfaces are also clearly offset. By correlation with similar surfaces along the Dead Sea lake margin, we propose a chronology for their emplacement. Taken together, our observations suggest an average slip rate over the Late Pleistocene of between 2 and 6 mm yr−1, with a preferred value of 4 mm yr−1. This slip rate is shown to be consistent with other constraints on the kinematics of the Arabian plate, assuming a rotation rate of about 0.396° Myr−1 around a pole at 31.1°N, 26.7°E relative to Africa.  相似文献   

15.
Summary. We construct a model of the San Andreas fault zone based on a rectangular fault in an elastic layer overlying a viscoelastic half-space. We alllow both steady and episodic aseismic slip at depth on the fault as well as a large-scale relative plate driving force. We use the model to explain the aseismic changes in geodetic triangulation angles observed during the 40 years following the 1906 San Francisco earthquake. The most important results are that viscoelastic relaxation can explain the data very well, and that the driving force of relative plate motion can be characterized by a horizontal distance scale perpendicular to the plate boundary of hundreds of kilometres.  相似文献   

16.
Seismic reflection profiles from the Murray Ridge in the Gulf of Oman, northwest Indian Ocean, show a significant component of extension across the predominantly strike-slip Indian–Arabian plate boundary. The Murray Ridge lies along the northern section of the plate boundary, where its trend becomes more easterly and thus allows a component of extension. The Dalrymple Trough is a 25 km wide, steep-sided half-graben, bounded by large faults with components of both strike-slip and normal motion. The throw at the seabed of the main fault on the southeastern side of the half-graben reaches 1800 m. The northwest side of the trough is delineated by a series of smaller antithetic normal faults. Wide-angle seismic, gravity and magnetic models show that the Murray Ridge and Dalrymple Trough are underlain by a crystalline crust up to 17 km thick, which may be continental in origin. Any crustal thinning due to extension is limited, and no new crust has been formed.
We favour a plate model in which the Indian–Arabian plate boundary was initially located further west than the Owen Fracture Zone, possibly along the Oman continental margin, and suggest that during the Oligocene–Early Miocene Indian Ocean plate reorganization, the plate boundary moved to the site of the present Owen Fracture Zone and that motion further west ceased. At this time, deformation began along the Murray Ridge, with both the uplift of basement highs, and subsidence in the troughs tilting the lowest sedimentary unit. Qalhat Seamount was formed at this time. Subsequent sediments were deposited unconformably on the tilted lower unit and then faulted to produce the present basement topography. The normal faulting was accompanied by hanging-wall subsidence, footwall uplift, and erosion. Flat-lying recent sediments show that the major vertical movements have ceased, although continuing earthquakes show that some faulting is still active along the plate boundary.  相似文献   

17.
Physical models of subduction investigate the impact of regional mantle flow on the structure of the subducted slab and deformation of the downgoing and overriding plates. The initial mantle flow direction beneath the overriding plate can be horizontal or vertical, depending on its location with respect to the asthenospheric flow field. Imposed mantle flow produces either over or underpressure on the lower surface of the slab depending on the initial mantle flow pattern (horizontal or vertical, respectively). Overpressure promotes shallow dip subduction while underpressure tends to steepen the slab. Horizontal mantle flow with rates of 1–10 cm yr−1 provides sufficient overpressure on a dense subducting lithosphere to obtain a subduction angle of  ∼60°  , while the same lithospheric slab sinks vertically when no flow is imposed. Vertical drag force (due to downward mantle flow) exerted on a slab can result in steep subduction if the slab is neutrally buoyant but fails to produce steep subduction of buoyant oceanic lithosphere. The strain regime in the overriding plate due to the asthenospheric drag force depends largely on slab geometry. When the slab dip is steeper than the interplate zone, the drag force produces negative additional normal stress on the interplate zone and tensile horizontal stress in the overriding plate. When the slab dip is shallower than the interplate zone, an additional positive normal stress is produced on the interplate zone and the overriding plate experiences additional horizontal compressive stress. However, the impact of the mantle drag force on interplate pressure is small compared to the influence of the slab pull force since these stress variations can only be observed when the slab is dense and interplate pressure is low.  相似文献   

18.
Seismicity ( Ml <3.5) in the southern Aegean, located using data collected during seven weeks of recording by a temporary network of seismological stations, largely follows the Hellenic arc; the Sea of Crete is nearly aseismic, and only little activity is located south of the Hellenic trench, within the African plate. Focal mechanisms exhibit reverse faulting in the external part of the arc and normal faulting inside it. This normal faulting indicates N-S extension in the northern Aegean, the Gulf of Corinth, the Cyclades and Dodecanese Islands, but NW-SE extension in southern Peloponnese and western Crete and E-W extension in eastern Crete. This non-uniform strain pattern suggests that the Aegean region not only extends in a N-S sense, with the Hellenic arc moving south-westward relative to the Eurasian plate, but also by E-W extension of its southern margin, so that there is a net divergence of material.  相似文献   

19.
The earthquakes in the seismicity belt extending through Indonesia, New Guinea, Vanuatu and Fiji to the Tonga–Kermadec subduction zone recorded at the 65 portable broad-band stations deployed during the Skippy experiment from 1993–1996 provide good coverage of the lithosphere and mantle under the Australian continent, Coral Sea and Tasman Sea.
The variation in structure in the upper part of the mantle is characterized by deter-mining a suite of 1-D structures from stacked record sections utilizing clear P and S arrivals, prepared for all propagation paths lying within a 10° azimuth band. The azimuth of these bands is rotated by 20° steps with four parallel corridors for each azimuth. This gives 26 separate azimuthal corridors for which 15 independent 1-D seismic velocity structures have been derived, which show significant variation in P and S structure.
The set of 1-D structures is combined to produce a 3-D representation by projecting the velocity values along the ray path using a turning point approximation and stacking into 3-D cells (5° by 50 km in depth). Even though this procedure will tend to underestimate wave-speed perturbations, S -velocity deviations from the ak135 reference model exceed 6 per cent in the lithosphere.
In the uppermost mantle the results display complex features and very high S -wave speeds beneath the Precambrian shields with a significant low-velocity zone beneath. High velocities are also found towards the base of the transition zone, with high S -wave speeds beneath the continent and high P -wave speeds beneath the ocean. The wave-speed patterns agree well with independent surface wave studies and delay time tomography studies in the zones of common coverage.  相似文献   

20.
Magnetotelluric studies over the Shillong plateau and lower Brahmaputra sediments have delineated the Dauki fault as a NE–SW striking thrust zone with a dip angle of about 30°, along which the low resistivity layer of Bengal sediments and the underlying oceanic crust subduct to the northwest. At present, about 50 km length of these sequences has subducted beneath the Shillong plateau and is traced up to depth of about 40 km. Another thrust zone, sub parallel to the Dauki thrust is observed in the lower Brahmaputra valley, corresponding to the Brahmaputra fault. This is interpreted to be an intracratonic thrust within the Indian plate. These results suggest that a large fraction of the seismicity over the Shillong plateau is associated with the NE–SW striking Dauki thrust, contrary to the earlier belief that this fault zone is relatively aseismic. The present studies also suggest that the Shillong plateau and the adjoining sedimentary layers act as a supracrustal block, not directly participating in the subduction process. However in response to the compressive tectonic forces generated by the Himalayan and Indo-Burman subduction processes the Shillong plateau, together with the Brahmaputra sediments overlying the Indian crust drift eastwards relative to the Bengal sediments along the surface expression of the Dauki fault leading to a dextral strike slip movement. We thus propose that the NE Indian crust responds to the compressive forces differently at different depths, governed by the rheological considerations. At deeper levels the crustal readjustments take place through the subduction along the Dauki and Brahmaputra thrusts where as, at the shallow levels the relative deformability of the supracrustal blocks have a strong influence on the tectonics, leading to the strike slip mechanism along the surface expression of the Dauki fault.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号