首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 23 毫秒
1.
引入倾斜校正自适应光学技术到月球激光测距中,详细介绍了倾斜校正自适应光学的相关跟踪原理,给出了一种基于实时操作系统RTAI的相关跟踪波前处理机的设计结果.该波前处理机采用绝对差分算法,使用通用CPU,基于Linux硬实时扩展系统BTAI实现对波前的实时处理.实验结果证明,它的相关跟踪处理帧频为1 KHz,并且具有集成度...  相似文献   

2.
全日面矢量磁像仪(Full-disk vector MagnetoGraph, FMG)是先进天基太阳天文台(Advanced Space-based Solar Observatory, ASO-S)的主载荷之一,摆镜作为FMG稳像系统的重要组成部分,其力学性能是决定载荷观测指标的重要一环,需要对其进行仿真.设计了一种侧面固定的柔性支撑镜体结构,通过调整垫片厚度,可以得到由弹性压片提供的不同大小支持力.为了确定合理的支持力范围,建立3种不同参数模型,使用有限元软件对摆镜模型进行了在轨无重力环境的静力学仿真以及摆镜摆动频率为100 Hz、摆幅为±0.1 mrad时的动力学仿真,并进一步分析了地面有重力试验环境对面形的影响.仿真结果表明所设计的摆镜机构模型均满足通光口径内静态和动态的面形波峰波谷差(PeakValley, PV)小于1/10波长,面形均方根误差(Root Mean Square, RMS)小于1/40波长的光学系统要求,地面有重力环境不会对面形产生显著影响.在仿真结果的基础上,对其中一种模型进行加工装配和实际测试,测试结果表明摆镜结构设计合理,仿真计算结果有效.  相似文献   

3.
The adaptive optics system ALFA differs in some aspects from systems like ADONIS and PUEO which have delivered scientific results since years. Interchangeable lenslet arrays with different numbers of subapertures and a deformable mirror with many more actuators than the number of corrected modesresult in some peculiarities in the calibration of the system and the reconstruction of incident wavefronts.We describe the design of ALFA's optics and its modal control architecture with a focus on a comparative study of the performance of different mode sets used to correct the wavefront aberrations. An outlook on our plans to improve and simplify the use of ALFA is given.The last section is dedicated to issues related to observing with ALFA in its present state. Expected Strehl ratios for different seeing conditions and guide star magnitudes are summarized in a table. AO observations in general, direct imaging and doing spectroscopywith ALFA in particular are discussed.  相似文献   

4.
5.
In stellar interferometers, the fast-steering mirror (FSM) is widely utilized to correct the wavefront tilt caused by the atmospheric turbulence and internal instrumental vibration, because of its high resolution and fast response frequency. In this study, the non-coplanar error between the FSM and the actuator deflection axis introduced by the manufacturing, assembly, and adjustment is analyzed systematically. Via a numerical method, the additional optical path difference (OPD) caused by the above factors is studied, and its effect on the fringe tracking accuracy of a stellar interferometer is also discussed. On the other hand, the starlight parallelism between the beams of two arms is one of the main factors for the loss of fringe visibility. By analyzing the influence of wavefront tilt caused by the atmospheric turbulence on fringe visibility, a simple and efficient real-time correction scheme of starlight parallelism is proposed based on a single array detector. The feasibility of this scheme is demonstrated by a laboratory experiment. The results show that after the correction of fast-steering mirror, the starlight parallelism meets preliminarily the requirement of a stellar interferometer on the wavefront tilt.  相似文献   

6.
在自适应光学系统中,波前探测器的噪声、未完全补偿湍流所引起的误差以及变形镜的拟合误差是主要的误差源.本文针对已经建立的2.16m望远镜红外自适应光学系统,从伺服控制系统的角度分析了该系统的闭环噪声、大气湍流引起的误差以及该系统的闭环总体误差.该系统的闭环总体误差是光强及系统闭环带宽的函数.本文还分析了该系统的有效性以及对大气湍流不同改善程度情况下光强与闭环带宽的关系.并在此基础上给出了该系统的最佳带宽选取及系统的极限工作星等.  相似文献   

7.
The results of studies of the optics of the 1-m Zeiss-1000 telescope of the Special Astrophysical Observatory of the Russian Academy of Sciences (SAO RAS) by the Shack–Hartmann (SH) method are presented. Using a Shack–Hartmann wavefront sensor (SH WFS) we have adjusted the telescope optical system by means of shifts and tilts of the secondary mirror. The procedure has significantly reduced the aberrations that appeared during the long-term instrument operation. A new method to investigate the surface quality of the mirrors of the Zeiss-1000 being applied, characteristics close to the diffraction limit are achieved. In general, the entire opto-mechanical telescope system provides an image quality of about 0.5″ at 80%energy level.  相似文献   

8.
A procedure has been developed to compute static aberrations once the telescope PSF has been measured with the lucky imaging technique, using a nearby star close to the object of interest as the point source to probe the optical system. This PSF is iteratively turned into a phase map at the pupil using the Gerchberg?CSaxton algorithm and then converted to the appropriate actuation information for a deformable mirror having low actuator number but large stroke capability. The main advantage of this procedure is related with the capability of correcting static aberration at the specific pointing direction and without the need of a wavefront sensor.  相似文献   

9.
为能够实时补偿大气湍流对月球激光测距带来的渡前倾斜量误差,采用相关跟踪自适应光学系统,并根据其大计算量、高实时性的要求,创新地设计了基于PCI-Express高速图像采集卡及其硬实时操作系统驱动程序,完成对扩展源目标大气倾斜量的实时补偿.详细介绍了整体系统的软硬件设计,给出了一种PCI-Express高速图像采集卡设计结果及其RTAI实时驱动程序的软件设计结果,完成了进一步提高图像传输速度,减小相关跟踪系统系统延迟,提高系统响应带宽的目标,最终实现了图像数据的实时传输(≤28 μS)及波前倾斜量的实时补偿(≤348 μS).  相似文献   

10.
A high‐order Adaptive Optical (AO) system for the 65 cm vacuum telescope of the Big Bear Solar Observatory (BBSO) is presented. The Coudé‐exit of the telescope has been modified to accommodate the AO system and two imaging magnetograph systems for visible‐light and near infrared (NIR) observations. A small elliptical tip/tilt mirror directs the light into an optical laboratory on the observatory's 2nd floor just below the observing floor. A deformable mirror (DM) with 77 mm diameter is located on an optical table where it serves two wave‐front sensors (WFS), a correlation tracker (CT) and Shack‐Hartman (SH) sensor for the high‐order AO system, and the scientific channels with the imaging magnetographs. The two‐axis tip/tilt platform has a resonance frequency around 3.3 kHz and tilt range of about 2 mrad, which corresponds to about 25″ in the sky. Based on 32 × 32 pixel images, the CT detects image displacements between a reference frame and real‐time frames at a rate of 2 kHz. High‐order wave‐front aberrations are detected in the SH WFS channel from slope measurements derived from 76 sub‐apertures, which are recorded with 1,280 × 1,024 pixel Complex Metal Oxide Semiconductor (CMOS) camera manufactured by Photobit camera. In the 4 × 4 pixel binning mode, the data acquisition rate of the CMOS device is more than 2 kHz. Both visible‐light and NIR imaging magnetographs use Fabry‐Pérot etalons in telecentric configurations for two‐dimensional spectro‐polarimetry. The optical design of the AO system allows using small aperture prefilters, such as interference or Lyot filters, and 70 mm diameter Fabry‐Pérot etalons covering a field‐of‐view (FOV) of about 180″ × 180″.  相似文献   

11.
Wavefront sensing from multiple focal plane images is a promising technique for high-contrast imaging systems.However,the wavefront error of an optics system can be properly reconstructed only when it is very small.This paper presents an iterative optimization algorithm for the direct measurement of large static wavefront errors from only one focal plane image.We first measure the intensity of the pupil image to get the pupil function of the system and acquire the aberrated image on the focal plane with a p...  相似文献   

12.
波前检测是天文望远镜自适应光学中的重要环节。四棱锥作为一种新型的波前检测元件,与其他传统的波前传感器相比,具有较高的灵敏度。特别是对于光干涉或拼接镜面望远镜而言,四棱锥波前传感器能够被用来检测子望远镜或子镜面之间的相对光程差,从而为干涉(或共相)的实现提供有效的检测信号。在分析四棱锥波前检测原理的基础上,阐述了单孔径条件下波前倾斜检测及双孔径干涉条件下相对光程差检测的软件仿真设计和阶段性成果,并简述了下一阶段的研究计划。  相似文献   

13.
Adaptive Optics on Large Telescopes   总被引:2,自引:0,他引:2  
Observations withground based telescopes suffer from atmospheric turbulence.Independent of the telescope size the angular resolution inthe visible is equivalent to that of a telescope with adiameter of 10–20 cm. This effect is caused by the turbulentmixing of air with different temperatures in the atmosphere.Thus, the perfect plane wave from a star at infinity isaberrated before it enters the telescope. In the following,we will discuss the physical background of imaging throughturbulence, using Kolmogorov statistics, and the differenttechniques to sense and to correct the wave-front aberrationswith adaptive optics. The requirements for the control loop ofan adaptive optics system are discussed including formulas forthe limiting magnitude of the guide star as a function of thewave-front sensing method, of the quality of the wave-frontsensor camera, and of the degree of correction. Finally, ashort introduction to deformable mirror technology will begiven followed by the presentation of a new method to measureand to distinguish individual turbulent layers in order toincrease the isoplanatic angle.  相似文献   

14.
A piezo driven tilt mirror was developed and built as one component of an image motion compensation system for a solar telescope. The bandwidth of the mirror with a diameter of 60 mm is about 1 kHz with negligible phase shift between input signal and mirror response up to 900 Hz. The tilt range is 1.6 mrad. Special care was taken to maintain the surface quality of the mirror to better than /15 after fixing it to the substrate.  相似文献   

15.
Adaptive optics (AO), which provides diffraction limited imaging over a field-of-view (FOV), is a powerful technique for solar observation. In the tomographic approach, each wavefront sensor (WFS) is looking at a single reference that acts as a guide star. This allows a 3D reconstruction of the distorted wavefront to be made. The correction is applied by one or more deformable mirrors (DMs). This technique benefits from information about atmospheric turbulence at different layers, which can be used to reconstruct the wavefront extremely well. With the assistance of the MAOS software package, we consider the tomography errors and WFS aliasing errors, and focus on how the performance of a solar telescope (pointing toward zenith) is related to atmospheric anisoplanatism. We theoretically quantify the performance of the to- mographic solar AO system. The results indicate that the tomographic AO system can improve the average Strehl ratio of a solar telescope in a 10" - 80" diameter FOV by only employing one DM conjugated to the telescope pupil. Furthermore, we discuss the effects of DM conjugate altitude on the correction achievable by the AO system by selecting two atmospheric models that differ mainly in terms of atmospheric prop- erties at ground level, and present the optimum DM conjugate altitudes for different observation sites.  相似文献   

16.
17.
New challenges for adaptive optics: extremely large telescopes   总被引:1,自引:0,他引:1  
The performance of an adaptive optics (AO) system on a 100-m diameter ground-based telescope working in the visible range of the spectrum is computed using an analytical approach. The target Strehl ratio of 60 per cent is achieved at 0.5 μm with a limiting magnitude of the AO guide source near R   magnitude~10, at the cost of an extremely low sky coverage. To alleviate this problem, the concept of tomographic wavefront sensing in a wider field of view using either natural guide stars (NGS) or laser guide stars (LGS) is investigated. These methods use three or four reference sources and up to three deformable mirrors, which increase up to 8-fold the corrected field size (up to 60 arcsec at 0.5 μm). Operation with multiple NGS is limited to the infrared (in the J band this approach yields a sky coverage of 50 per cent with a Strehl ratio of 0.2). The option of open-loop wavefront correction in the visible using several bright NGS is discussed. The LGS approach involves the use of a faint ( R ~22) NGS for low-order correction, which results in a sky coverage of 40 per cent at the Galactic poles in the visible.  相似文献   

18.
一个巨型望远镜方案   总被引:4,自引:0,他引:4  
提出一个有特色的巨型望远镜(FGT)方案.其主镜口径为30米,主焦比为1.2,由1095块圆环形子镜构成.采用地平式装置.光学系统包括Nasmyth系统、折轴(Coude)系统和一个大视场系统.提出一个由4个镜面组成的新的Nasmyth系统,在约10′的视场范围内像斑小于爱里斑,达到衍射极限.比传统的Nasmyth系统的衍射极限视场大得多.可在这样的大视场内同时作好几个小区域的衍射极限的观测.当由Nasmyth系统转换到折轴系统和大视场系统时,采用主动光学技术改变子镜的面形、倾斜和平移,产生一个新的主镜面形,使折轴系统和大视场系统都能得到很好的像质.大视场系统的视场直径25′,场曲轻微,并有可能校正大气色散.给出了子镜面形和位置的公差,并讨论了望远镜的装置和结构,方案中的特色和创新对未来大望远镜的研制有普遍意义.  相似文献   

19.
We introduce a novel concept to sense the wavefront for adaptive optics purposes in astronomy using a conventional laser beacon. The concept we describe involves treating the light scattered in the mesospheric sodium layer as if it comes from multiple rings located at infinity. Such a concept resembles an inverse Bessel beam and is particularly suitable for multi-conjugated adaptive optics on extremely large telescopes. In fact, as the sensing process uses light apparently coming from infinity, some problems linked to the finite distance and vertical extent of the guide source are solved. Since such a technique is able to sense a wavefront solely in the radial direction, we propose furthermore a novel wavefront sensor by combining the inverse Bessel beam approach with the recently introduced z -invariant technique for a pseudo-infinite guide star sensor.  相似文献   

20.
The ALFA laser subsystem uses a 4 watt continuous wave laser beam to produce an artificial guide star in the mesospheric sodium layer as a reference for wavefront sensing. In this article we describe the system design, focusing on the layout of the beam relay system. It consists of seven mirrors, four of which are motor-controlled in closed loop operation accounting for turbulences inside the dome and flexure of the main telescope.The control system features several computers which are located close to analysis and control units. The distribution of the tasks and their interaction is presented, as well as the graphical user interface used to operate the complete system. This is followed by a discussion of the aircraft detection system ALIENS. This system shuts off the laser beam when an object passes close to the outgoing laser.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号