共查询到20条相似文献，搜索用时 31 毫秒
1.
Identification of failure susceptible slopes through different rock engineering approach is highly valuable in landslide risk management along crucial highway corridors in the high mountainous region. In this study, a critical highway(NH-5) segment in higher Himalaya has been investigated using the various rock mass characterization schemes based on detailed field observations. Since the highway corridor is highly susceptible to discontinuities-driven failures, consisting of jointed rock masses;Mean and Combined kinematic feasibility analysis has been performed for 20 highway slopes. Observed slope mass classes have been compared to the feasibility percentage of discontinuities driven failures(wedge, toppling, and planar) and accordingly the kinematic feasibility zonation along highway segment has been done for each as well as overall failure types. Based on the slope mass conditions and discontinuities driven failures probability(%), responsive remedial measures have been proposed for individual highway slopes to ensure safe and uninterrupted transportation. 相似文献
2.
Cracks in rock or soil slopes influence the stability and durability of the slopes. Seismic forces can trigger slope disasters, particularly in the cracked slopes. Considering the nonlinear characteristics of materials, the more generalized nonlinear failure criterion proposed by Baker is adopted. The influence of non-dimensional strength parameters on the stability of cracked slopes under earthquakes is performed using the upper bound limit analysis. The seismic displacement is calculated by adopting the logarithmic spiral failure surface according to the sliding rigid block model. Based on the existing studies, two methods for the stability analysis of cracked slopes under earthquakes are introduced: the pseudo-static method(with the factor of safety(Fs) as an evaluation index), and the displacement-based method(with the seismic displacement as an evaluation index). The pseudo-static method can only determine the instantaneous stability state of the cracked slope, yet the displacement-based methodreflects the stability variation of cracked slopes during earthquakes. The results indicate that the nondimensional strength parameters affect the factor of safety and seismic displacement of slopes significantly. The non-dimensional strength parameter(n) controlling the curvature of strength function shapes on the slope stability is affected by other parameters. Owing to cracks, the effect of non-dimensional strength parameters on seismic displacement becomes more significant. 相似文献
3.
A new approach to plane failure of rock slope stability based on water flow velocity in discontinuities for the Latian dam reservoir landslide 总被引：2，自引：2，他引：0
The stability of slopes is always of great concern in the field of rock engineering. The geometry and orientation of pre-existing
discontinuities show a larger impact on the behavior of slopes that is often used to describe the measurement of the steepness,
incline, gradient, or grade of a straight line. One of the structurally controlled modes of failure in jointed rock slopes
is plane failure. There are numerous analytical methods for the rock slope stability including limit equilibrium, stress analysis
and stereographic methods. The limiting equilibrium methods for slopes under various conditions against plane failure have
been previously proposed by several investigators. However, these methods do not involve water pressure on sliding surfaces
assessments due to water velocity and have not yet been validated by case study results. This paper has tried to explore the
effects of forces due to water pressure on discontinuity surfaces in plane failure through applying the improved equations.
It has studied the effect of water flow velocity on sliding surfaces in safety factor, as well. New equations for considering
water velocity (fluid dynamics) are presented. To check the validity of the suggested equations, safety factor for a case
study has been determined. Results show that velocity of water flow had significant effect on the amount of safety factor.
Also, the suggested equations have higher validity rate compared to the current equations. 相似文献
4.
Modelling the flexural buckling failure of stratified rock slopes based on the multilayer beam model
The buckling failure of stratified rock slopes intersected by a set of steep discontinuities that are approximately parallel to the slope surface is frequently encountered while constructing railways and roadways in mountainous areas. In this study, an analytical approach based on the energy equilibrium principle is presented to solve the flexural buckling stability of stratified rock slopes within the framework of multilayer beam theory. The generalized HoekBrown failure criterion is introduced to reflect the influences of slope size(scale effects) on the buckling stability. Subsequently, numerical and physical modellings from previous literatures are employed to validate the proposed approach. Furthermore, a practical case of Bawang Mountain landslide is also used for the comparative analysis. The study shows that the present analytical approach is capable to provide a more reasonable assessment for the buckling failure of stratified rock slopes, compared with several existing analytical approaches. Finally, a detailed parametric study is implemented, and the results indicate that the effects of rock strength, rock deformation modulus, geological strength index, layer thickness and disturbance degree of rock mass on the buckling failure of stratified rock slopes are more significant than that of rock type and slope angle. 相似文献
5.
Experimental study of motion characteristics of rock slopes with weak intercalation under seismic excitation 总被引：1，自引：0，他引：1
In order to investigate the effect of a weak intercalation on slope stability, a large-scale shaking table model test was conducted to study the dynamic response of rock slope models with weak intercalation. The dynamic response of the prototype slopes were studied in laboratory with the consideration of law of similitude. The initiation failure was observed in the rock slope model with a counter-tilt thin-weak intercalation firstly, not in the slope model with a horizontal thin-weak intercalation. Furthermore, it was interesting that the fracture site is shifted from crest top to the slope surface near the weak intercalation, which is different with the location of failure position in a normal layered slope. We also discussed the effect of the dip angle and the thickness of weak intercalation on the failure mechanism and instability mode of the layered rock slope. From the experimental result, it was noted that the stability of the slope with a counter-tilt weak intercalation could be worse than that of the other slopes under seismic excitation. The findings showed the difference of failure in slopes with a horizontal and counter weak intercalation, and implicated the further evaluation of failure of layered slopes caused by seismic loads. 相似文献
6.
Rock slope stability is of great concern along highway routes as stability problems on cut slopes may cause fatal events as well as loss of property. In rock slope engineering, stability evaluations are commonly performed by means of analytical or numerical analyses, principally considering the factor of safety concept. As a matter of fact, the probabilistic assessment of slope stability is progressively getting popularity due to difficulties in assigning the most appropriate values to design parameters in analytical or numerical methods. Additionally, the effect of heterogeneities in rock masses and discontinuities on the analysis results is minimized through the probabilistic concept. In this study, slope stability of high and steep sedimentary rock cut slopes along a state highway in Adilcevaz-Bitlis (Turkey) was evaluated on the basis of probabilistic approach using the Slope Stability Probability Classification (SSPC) system. The probabilistic assessment indicates major slope stability problems because of discontinuity controlled and discontinuity orientation independent mass movements. Almost all studied cut slopes suffer from orientation-independent stability problems with very low stability probabilities. Additionally, the probability of planar and toppling failures is significantly high with respect to the SSPC system. The stability problems along the investigated rock slopes were also verified by field reconnaissance. Remedial measures such as slope re-design and reinforcement at the studied locations should be taken to prevent hazardous events along the highway. On the other hand, the probabilistic approach may be a useful tool during rock slope engineering to overcome numerous uncertainties when probabilistic and analytic results are compared. 相似文献
7.
In recent major earthquakes, the researchers have found the need for consideration of vertical seismic acceleration for the stability analysis of the man-made and natural slopes. However, in most past studies, the performance of slopes has been assessed by accounting only the horizontal seismic component of the ground motion, without giving due weightage to the effect of vertical component. In the present study, analytical expressions are derived to determine the factor of safety, yield seismic coefficient and consequently the seismic displacement of cohesionless soil slope under combined horizontal and vertical components of the ground motion. The derivation uses the Newmark’s sliding block approach, in which the soil slope with a planar failure surface within the framework of conventional pseudo-static analysis is assumed to follow the Mohr-Coulomb failure criterion. The effects of vertical seismic coefficient on the stability of cohesionless slope have been studied through a set of graphical presentations for a specific range of soil parameters. It is observed that overlooking the effect of the vertical component of the ground motion on factor of safety and the displacement while designing the slope may be detrimental, resulting in the slope failure. The general expressions presented in this paper may be highly useful in the field of earthquake geotechnical engineering practice for designing the cohesionless soil slopes under combined horizontal and vertical seismic loads. 相似文献
8.
互层倾倒是一类典型的深层倾倒模式,为准确评价其稳定性,开展互层倾倒的工程地质特性及稳定性评价研究。以雅砻江上游发育的深层倾倒体为典型实例,利用基于演化过程的研究方法,在构建倾倒体工程地质模型的基础上,从变形过程和演化阶段上定量评价斜坡整体稳定性。研究表明:互层倾倒是由块体倾覆和板梁弯曲形成的复合倾倒模式,即:硬岩发生块状-弯曲倾倒,而软岩发生弯曲倾倒;空间上,一个发育完备的倾倒体可划分为:滑动区(A区)、强倾倒区(B区)、弱倾倒区(C区)以及原岩区(D区)。基于实测数据提出的斜坡倾倒定量描述体系,可以作为岩体倾倒变形识别和变形程度分级的基本依据;时间上,互层倾倒演化过程主要经历4个演化阶段:卸荷回弹陡倾拉裂面阶段,初始变形阶段,板梁根部折断、剪切面贯通阶段以及破坏阶段,并最终转化为蠕滑-拉裂模式形成滑坡。该滑动面受强变形岩体中倾向坡外结构面控制,而并非沿最大弯折带发育;滑动区(A区)的出现意味着斜坡最终破坏的发生,对应于演化的第三阶段,为斜坡的极限平衡状态,稳定性系数介于1.0~1.05之间。基于演化过程的评价方法,能有效解决互层倾倒稳定性评价问题。 相似文献
9.
This study discussed how cavity gas pressure affects the stability of rock mass with fractures under well controlled laboratory experiments. Suddenly-created void space created and the induced gas pressures have been the focus of active researches because they are associated with fast movement of large-scale landslides. A shaking table experiment was set up to mimic weak-intercalated rock slope under seismic loads. Excessive cavity gas pressure would be produced in weak spots upon a sudden vibration load. The drastically elevated gas pressure is believed to be responsible for the creation of cavities surrounding the tension fracture. With dissipation of the excessive cavity gas pressure, the fractures are in unbounded closed-state. This observation explains that the slope body would be split and loosened under several aftershocks, and with the expanding of the cracks, the slope failure eventually occurred. The research of the mechanism of cavity gas pressure could provide a novel insight into the formation mechanism of landslides under seismic load and has implications for the disaster prevention and control theory for the slope stability evaluation. 相似文献
10.
软硬互层结构的顺层岩质边坡破坏类型复杂、难于防治, 针对此类边坡地质灾害易发、多发的问题, 从坡面角度、岩层倾向及组合形式、节理分布等方面进行了研究。边坡物理模型试验是揭示边坡变形破坏机理的重要手段, 基于相似理论, 以重庆市万州区孙家滑坡为工程依托, 根据滑坡区地质勘探报告设计了室内边坡物理模型试验; 试验通过顶升模型箱模拟重力加载来探究顺层岩质边坡发生破坏时, 前缘坡角和软弱夹层倾角之间的关系; 结合有限元分析软件Plaxis 2D对物理模型进行了多组数值模拟试验, 以验证软硬互层顺层岩质边坡破坏机制。试验结果表明: 对于顺层岩质边坡, 当软弱夹层的倾角在22°左右, 前缘开挖坡角58°左右时, 顺层岩质边坡容易发生滑动, 滑动面为后缘节理面和软弱夹层的贯通面。因此, 顺层岩质边坡稳定性受层面和节理面密度的控制, 当边坡含多层软弱层面时, 易沿层面和后缘节理贯通面发生破坏, 随着软弱面层数增加, 边坡稳定系数逐渐降低。研究成果可以为公路开挖切坡导致的顺层岩质边坡失稳机理研究及其稳定性评价提供理论依据, 为顺层岩质边坡失稳的预测预报提供支撑。 相似文献
11.
Study on Dynamic Response of the ＂Dualistic＂ Structure Rock Slope with Seismic Wave Theory 总被引：2，自引：1，他引：1
Currently, scant attention has been paid to the theoretical analysis on dynamic response mechanism of the ＂Dualistic＂ structure roek slope. The analysis presented here provides insight into the dynamic response of the ＂Dualistie＂ structure rock slope. By investigating the principle of energy distribution, it is shown that the effect of a joint plays a significant role in slope stability analysis. A dynamic reflection and transmission model （RTM） for the ＂Dualistic＂ structure rock slope and explicit dynamic equations are established to analyze the dynamic response of a slope, based on the theory of elastic mechanics and the principle of seismic wave propagation. The theoretical simulation solutions show that the dynamic response of the ＂Dualistic＂ structure rock slope （soft-hard） model is greater than that of the ＂Dualistic＂ strueture rock slope （hard-soft） model, especially in the slope crest. The magnifying effect of rigid foundation on the dynamic response is more obvious than that of soft foundation. With the amplitude increasing, the cracks could be found in the right slope （soft-hard） crest. The crest failure is firstly observed in the right slope （soft-hard） during the experimental process. The reliability of theoretical model is also investigated by experiment analysis. The conclusions derived in this paper could also be used in future evaluations of Multi-layer rock slopes. 相似文献
12.
TUNCAY Ergün 《山地科学学报》2018,15(1):114-129
In this study, the mechanisms of slope instabilities triggered by engineering excavations at location of a planned tunnel portal in the northwest region of Turkey were assessed, and stability of the current slopes which has impacts on safety of a settlement (village) and agricultural fields was investigated. In the first stage of the study, in order to identify the geological units and structural properties of the sedimentary rocks in the area, to clarify the mechanisms of instabilities and to characterize discontinuity and rock mass properties field works were conducted. In this content, geotechnical boreholes, geophysical explorations between the boreholes, line surveys to explore discontinuity properties, preparation of slope profiles using topographical techniques and sampling of rock blocks and discontinuity planes were performed. In the second stage, laboratory tests were carried out on the samples to determine the geomechnical properties of the slope forming materials and discontinuities. Then, back analyses of the instabilities were made to assess the responsible shear strength parameters of the geological units during failures by considering laboratory shear test results too. Based on the backanalyses of the failures, the strength properties of the slope debris were estimated, and it has been clarified that the residual shear strength properties are the factors controlling slip mechanism along the beddings. Following the stability analyses, it is understood that a further instability along the mass or bedding planes in the failed and redesigned area are not expected, if the current slope geometry is not changed. However, safety factor calculated for the slope in the debris is 1.1 which is well below the recommended value in the literature. The minimum safety factor for currently stable slopes which were cut at the eastern part of the failed area is 1.22 which is also less than that suggested in literature. Some remedial measures such as mini-pile or slope flattening are suggested after analyses to increase the factor of safety for this part below the settlement. 相似文献
13.
In analyzing seismic stability of a slope with upper bound limit analysis method, the slip surface is often assumed as a log-spiral or plane slip surface. However, due to the presence of a weak layer and unfavorable geological structural surface or a bedrock interface with overlying soft strata, the preexisting slip surface of the slope may be irregular and composed of a series of planes rather than strictly log-spiral or plane shape. A computational model is developed for analyzing the seismic stability of slopes with pre-existing slip surfaces. This model is based on the upper bound limit analysis method and can consider the effect of anchor bolts. The soil or rock is deemed to follow the Mohr-Coulomb yield criterion. The slope is divided into multiple block elements along the slip surface. According to the displacement compatibility and the associated flow rule, a kinematic velocity field of the slope can be obtained computationally. The proposed model allows not only calculation of the rate of external work owing to the combined effect of self-weight and seismic loading, but also that of the energy dissipation rate caused by the slip surface, interfaces of block elements and anchorage effect of the anchors. Considering a direct relationship between the rate of external work and the energy dissipation rate, the expressions of yield acceleration and permanent displacement of anchored slopes can be derived. Finally, the validity of this proposed model is illustrated by analysis on three typical slopes. The results showed that the proposed model is more easily formulated and does not need to solve complex equations or time consuming iterations compared with previous methods based on the conditions of force equilibrium. 相似文献
14.
A modified Hoek-Brown failure criterion considering the damage to reservoir bank slope rocks under water saturation-dehydration circulation 总被引：1，自引：0，他引：1
After water is impounded in a reservoir, rock mass in the hydro-fluctuation belt of the reservoir bank slope is subject to water saturationdehydration circulation (WSDC). To quantify the rate of change of rock mechanical properties, samples from the Longtan dam area were measured with uniaxial compression tests after different numbers (1, 5, 10, 15, and 20) of simulated WSDC cycles. Based on the curves derived from these tests, a modified Hoek- Brown failure criterion was proposed, in which a new parameter was introduced to model the cumulative damage to rocks after WSDC. A case of an engineering application was analyzed, and the results showed that the modified Hoek-Brown failure criterion is useful. Under similar WSDC-influenced engineering and geological conditions, rock mass strength parameters required for analysis and evaluation of rock slope stability can be estimated according to this modified Hoek-Brown failure criterion. 相似文献
15.
Slope reinforcement for housing in Three Gorges reservoir area 总被引：1，自引：1，他引：0
The Three Gorges Project of the Yangtze River is the largest hydropower-complex project under construction in the world. Under the largescale relocation projects, 2874 engineered slopes are formed along with the construction of new towns. In this paper, the cutting slopes are mainly soil slopes and rock slopes. Soil slopes include residual soil slopes, colluvial accumulation slopes, swelling soil slopes, and artificial earth fill slopes, etc. Rock slopes include blocky structure rock slopes, layer structure rock slopes, and clastic structure rock slopes, etc. Varied protection measures have been used for slope protection in the reservoir area including shotcrete concrete-anchor bars, frame beams, retaining walls, slope stabilizing piles, sheet-pile walls, anchorage anti-shear tunnels, flexible protection grids, and drainage, etc. Besides, slope deformation monitoring systems have been set up to monitor deformation failure and the stability state of slopes. The protection measures have guaranteed slope safety and maintained a harmony with the urban environment and surrounding landscape. 相似文献
16.
The dynamic failure mode and energy-based identification method for a counter-bedding rock slope with weak intercalated layers are discussed in this paper using large scale shaking table test and the Hilbert-Huang Transform (HHT) marginal spectrum. The results show that variations in the peak values of marginal spectra can clearly indicate the process of dynamic damage development inside the model slope. The identification results of marginal spectra closely coincide with the monitoring results of slope face displacement in the test. When subjected to the earthquake excitation with 0.1 g and 0.2 g amplitudes, no seismic damage is observed in the model slope, while the peak values of marginal spectra increase linearly with increasing slope height. In the case of 0.3 g seismic excitation, dynamic damage occurs near the slope crest and some rock blocks fall off the slope crest. When the seismic excitation reaches 0.4 g, the dynamic damage inside the model slope extends to the part with relative height of 0.295-0.6, and minor horizontal cracks occur in the middle part of the model slope. When the seismic excitation reaches 0.6 g, the damage further extends to the slope toe, and the damage inside the model slope extends to the part with relative height below 0.295, and the upper part (near the relative height of 0.8) slides outwards. Longitudinal fissures appear in the slope face, which connect with horizontal cracks, the weak intercalated layers at middle slope height are extruded out and the slope crest breaks up. The marginal spectrum identification results demonstrate that the dynamic damage near the slope face is minor as compared with that inside the model slope. The dynamic failure mode of counter-bedding rock slope with weak intercalated layers is extrusion and sliding at the middle rock strata. The research results of this paper are meaningful for the further understanding of the dynamic failure mode of counter-bedding rock slope with weak intercalated layers. 相似文献
17.
本文介绍新滩滑坡后两岸边坡监测的工作,对边坡变形提出了趋势意见。认为新滩斜坡目前正处于整体稳定下的局部调整阶段,变形缓慢平稳,但要注视广家崖的危岩动态;链子崖仍有趋势性的倾江形变。5—6号缝围成的7万方危岩及江段的5万方危岩体尚有一触即崩之势,须加强监视。 相似文献
18.
The"5.12"Wenchuan earthquake in 2008 triggered a large number of co-seismic landslides.The rear boundary or cracks of co-seismic landslide are generally located at the steep free surface of thin or thick mountains.Dynamic process of this kind of landslides could be divided into two parts:the seismic dynamic response of the slope and the movement process of rock mass.Taking the Laoyingyan rockslide as an example,the amplification effect was studied by single-degree-of-freedom system analysis method.Besides,the dynamic process of landslide under seismic loading was simulated by the finite difference method(FDM)and discrete element method(DEM).The amplification coefficient of the rockslide to seismic wave is 1.25.The results show that the critical sliding surface of the Laoyingyan rockslide was formed at the 23 th seconds under the action of seismic wave.At the same time,tension failure occurred at the rear edge of the sliding mass and shear failure occurred at the front edge.The maximum displacement was 0.81 m and the initial velocity was 2.78 m/s.During the initiation process of the rockslide,the rock mass firstly broke down along the joints which are along the dip of the rock stratum,and then collapsed bodily along the secondary structural planes.In the process of movement,the maximum velocity of rock mass was 38.24 m/s.After that,the rock mass underwent multiple collisions,including contact,deceleration to 0 and speed recovery after rebound.Finally,due to the constant loss of energy,the rocks stopped and accumulated loosely at the foot of the slope.The longest distance of movement was about 494 m.Besides,the smaller the damping ratio,the farther the rock mass moved.Compared with the results without considering the amplification factor,the movement distance of landslide by considering the amplification factor was more accurate.The study of the Laoyingyan rockslide is helpful to strengthen our field identification of potential co-seismic rockslides.At the same time,understanding its movement and accumulation process can help us better predict the hazard scope of the co-seismic rockslides,and provide a reference for the design of treatment projects. 相似文献
19.
Failure mechanisms of post-earthquake bedrock landslides in response to rainfall infiltration 总被引：1，自引：0，他引：1
Among the triggering factors of post-earthquake bedrock landslides,rainfall plays an important role.However,with slope variation,the mechanism of its effects on the failure of rock landslides is not clear.Here,from the viewpoint of fracture mechanics,and based on post-earthquake conditions,the mechanisms of crack propagation,water infiltration and development of the sliding surface were investigated.Then,according to the upper boundary theorem,the effects of water infiltrated into fractures on the stability of rock slopes were analyzed quantitatively.Finally,an example is presented to verify the theory.The results show that the propagation and coalescence of cracks and the lubrication of incipient sliding surfaces are the main causes of the failure of post-earthquake rock landslides in response to rainfall. 相似文献
20.
由于传统搜索方法对岩质边坡滑裂面的确定无法兼顾效率与精度, 如何迅速准确确定潜在滑裂面仍然是个难题。极限平衡法在岩质边坡稳定性分析中备受认可, 采用岩质边坡平面剪切滑动模型, 以滑裂面的倾角来表征潜在滑裂面的位置; 基于极值法, 推导了极限平衡条件下平面剪切破坏型岩质边坡潜在滑裂面的解析解, 并结合香港秀茂坪路边坡对其准确性进行了验证, 进一步对四川宜宾打营盘山公路多级边坡进行了整体稳定性分析。结果表明: 香港秀茂坪边坡采用本文方法确定的边坡潜在滑裂面倾角与实际滑坡倾角基本一致。实际工程应用中, 采用Slide软件中布谷鸟搜索法和模拟退火法两种搜索方法得到的滑裂面倾角分别为38.0°和37.0°, 本解析法所得倾角为34.8°; 选用Janbu法、Morgenstern-Price法和Sarma法分别计算对应的稳定系数, 结果均为1.04左右, 本文所得稳定系数为1.15, 可见本文方法所得结果基本准确。通过参数敏感性分析发现, 随着黏聚力的增加, 边坡滑裂面倾角越来越小, 稳定系数也随之增加; 而当内摩擦角增大时, 边坡滑裂面倾角和稳定系数也随之增大。 相似文献