首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Boulder transport is an area of growing interest to coastal scientists as a means of improving our understanding of the complex interactions between extreme wave activity and the evolution of rocky coasts. However, our knowledge of the response of intertidal boulder deposits to contemporary storm events remains limited due to a lack of quantifiable field-based evidence. We address this by presenting a methodology incorporating Radio Frequency Identification (RFID) tagging and Differential Global Positioning Navigation Satellite System (DGNSS) technology to monitor and accurately quantify the displacement of RFID tagged boulders resulting from storm wave activity. Based on preliminary findings we highlight the suitability of the technology and methodology to better understand the spatial and temporal response of intertidal boulders to contemporary storm events. We inserted RFID tags in 104 limestone boulders (intermediate axes from 0.27 to 2.85 m) across a range of morphogenic settings at two sites on the intertidal shore platforms at Bembridge, Isle of Wight (UK). Fifteen topographic surveys were conducted between July 2015 and May 2017 to relocate and record tagged boulder locations (tag recovery rate: 91%). The relocated boulder coordinate data from both sites identified 164 individual transport events in 63% of the tagged boulder array amounting to 184.6 m of transport, including the displacement of a boulder weighing more than 10 tonnes. Incidents of boulder quarrying and overturning during transport were also recorded, demonstrating that despite the relatively sheltered location, intertidal boulders are created and regularly transported under moderate storm conditions. This suggests that contemporary storm events have a greater propensity to mobilise boulders in the intertidal range than has previously been realised. Consequently, by documenting our methodology we provide guidance to others and promote further use of RFID technology to enable new hypotheses on boulder transport to be tested in a range of field settings and wave regimes. © 2018 John Wiley & Sons, Ltd.  相似文献   

2.
Sediment transport of four boulder bed rivers is studied using lichenometry. The presence of lichens on boulders in the river channel is used to date the last mobilization of the blocks. Using size frequency diagrams and regional growth curves calibrated with dated reference points it is possible to determine the flood event responsible for the last mobilization of each boulder with lichens present. The specific stream power of flood events over the last 60 years is then calculated, and thresholds of sediment transport based on the sediment size are calculated. The results from the four studied rivers are compared to similar relationships in the literature. Sediment motion thresholds appear to be very variable within the same type of river (mountainous boulder bed rivers). The critical specific stream power necessary to mobilize a particle of a given diameter may vary by up to 10 times from one river to the next. Bed sediment size and river slope may explain this large range of stream powers. Calculation of the relative size of the transported particles (Di/D50) also shows that both hiding and protrusion effects, as well as channels slope, are important factors in sediment transport. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

3.
A rocky ramp fishway is one of the Nature like fishway, comprises a long sloping channel and boulders on a slope (Katopodis et al., 2001). The turbulence and backwater around the boulders creates refuges of decreased local flow where fish can rest. However, recent studies have shown that turbulent flow may influence fish migration (Smith et al., 2006). This paper is focused on boulder arrangement and height of boulder on rocky ramp fishway. The swimming performance of char (Salvelinus richardson) and freshwater sculpin (Cottus pollux) around boulders on experimental channel were observed using ultra-high-speed cameras, and the appropriate arrangement of boulders for each species was considered. In total, 27 hydraulic conditions were assessed considering variable distributions, shapes, heights of the boulders as well as variable flow depths by observing swimming behavior for each condition. Laboratory measurement shows that sculpin, which are bottom fish, require a density, and several linear arrangements of boulders to allow migration. As increasing the vertical low-velocity area, which is created behind high boulders does not always result in a good outcome for sculpin. However, this solution is not suitable for char; therefore, a diverse arrangement of boulders is required on individual rocky ramp fishways to allow the movement and migration of multiple species. We propose to add cloister in the fishway for free migration of weak swimmer.  相似文献   

4.
A 1200 m-long river segment of Carmel River (California) was constructed to bypass trapped reservoir sediment when San Clemente Dam was removed from the Carmel River in 2015. Hundreds of large boulders were used to construct 53 steps in an 800 m-long reach of the project. Nearly all the boulders were scattered to new locations in high flows of 2017, and have been relatively stable since that time. We analysed the causes of incipient motion and distance travelled for 226 randomly selected large boulders (0.5–1.8 m) impacted by a flood event in winter of 2019. Channel width, water depth, and isolation from neighbouring boulders were the main variables controlling individual large boulder incipient motion during a 10-year peak flow event in the ‘auto-naturalized’ constructed step-pool river in 2019. There is weak statistical evidence that a combination of shear stress and the presence of boulders located laterally downstream of the subject boulder controlled the distance the boulder moved. Frequentist statistics and Akaike information criterion model comparison determined that boulder size, boulder shape, boulder roundness, and local thalweg slope were not good predictors of large boulder incipient motion or distance transported. Average dimensionless critical shear value for the four largest mobilized boulders (1.5–1.6 m) was 0.014. We describe the geomorphic history of the site and use our results to discuss potential causes of unanticipated large boulder transport at the site that occurred in a <2-year peak flow of winter 2016 soon after step construction. © 2020 John Wiley & Sons, Ltd.  相似文献   

5.
The effect of fully submerged boulders on the flow structure in channels has been studied by some researchers. However, many natural streams have bed material with boulders that are not fully submerged under water. In many natural streams, boulders cover between 1% and 10% of the area of the stream reach. The effect of non-submerged boulders on the velocity profile and flow characteristics is very important for assessing riverbed deformation. The objectives of this paper are to find the pattern of velocity distribution around a non-submerged boulder and to compare it with the classical studies on flow resistance and Reynolds stress distribution in open channels. Also, by considering the variation in the Reynolds stress distribution at different locations around a non-submerged boulder, the effect of a non-submerged boulder on the estimation of shear velocity and resistance to flow has been investigated. Results indicates that inside the scour hole caused by a non-submerged boulder in a river velocity distributions are irregular. However, velocity distributions are regular outside the scour hole. The presence of the boulder causes a considerable deviation of the Reynolds shear stress from the classic distribution, showing a non-specific distribution with negative values. The classical methods for calculating shear velocity are not suitable because these methods do not give detailed velocity and Reynolds stress distributions in natural rivers with a lot of boulders. Thus, the effect of a non-submerged boulder on the estimation of the resistance to flow by considering the variations in velocity and Reynolds stress distributions at different locations around a non-submerged boulder is important and needs to be studied in a natural river instead of just in laboratory flumes. The negative values in Reynolds stress distribution around a boulder indicate that the classical methods are unable to predict resistance to flow, and also show strong turbulence inside the scour hole where the complex flow conditions present ambiguous Reynolds stress distributions. In the current study, to obtain a reasonable estimation of parameters in natural rivers, the classical method has been modified by considering velocity and Reynolds stress distributions through the boundary layer method.  相似文献   

6.
Clifftop coastal boulders transported by storm waves or tsunamis have been reported around the world. Although numerical calculation of boulder transport is a strong tool for the identification of tsunami or storm boulders, and for estimation of the wave size emplacing boulders, models which can reasonably solve boulder transport from below a cliff or from a cliff-edge onto a cliff-top do not yet exist. In this study, we developed a new numerical formulation for cliff-top deposition of boulders from the cliff edge or below the cliff, with validation from laboratory tests. We then applied the model using storm and tsunami wave forcing to simulate the observed boulder deposits at the northwest coast of Hachijo Island, Japan. Using the model, the actual distribution of boulders was explained well using a reasonable storm wave height without assumption of anomalously high-water level by storm surge. Results show that boulder transport from the cliff edge or under the cliff onto the cliff-top was possible from a tsunami with periods of 5~10 min or storm waves with no storm surge. However, the actual distribution of boulders on the cliff was explained only by storm waves, but not by tsunami. Therefore, the boulders distributed at this site are likely of storm wave origin. Our developed model for the boulder transport calculation can be useful for identifying a boulder's origin and can reasonably calculate cliff-top deposition of boulders by tsunami and storm waves. © 2019 John Wiley & Sons, Ltd. © 2019 John Wiley & Sons, Ltd.  相似文献   

7.
Extreme storm events are known to produce, entrain, transport and deposit sizable boulders along rocky coastlines. However, the extent to which these processes occur under moderate, fetch-limited wave conditions is seldom considered. In this study we quantify boulder transport at a relatively sheltered location subject to high-frequency, low-magnitude storm activity. This was achieved by deploying radio frequency identification (RFID) tags within 104 intertidal limestone boulders ranging in size from fine to very coarse (intermediate axis: 0.27–2.85 m). The study was conducted over 3 years (July 2015–July 2018) and encompassed numerous storm events. Tagged boulders were relocated during 17 field surveys and their positions recorded using a differential global positioning navigation satellite system (DGNSS). On completion, we identified boulder displacement in 69% of the tagged array. The accrued boulder transport distance amounted to 233.0 m from 195 incidents of displacement, including the movement of a boulder weighing an estimated 11.9 t. Transport was not confined to autumn and winter storms alone, as displacement was also recorded during summer months (April–September), despite the seasonally reduced wave magnitude. Boulder production by wave quarrying was documented in three tagged clasts, confirming observations that the shore platform is actively eroding. Incidents of overturning during transport were also recorded, including multiple overturning of clasts weighing up to 5 t. We further identify a statistically significant difference (maximum p-value ≤ 0.03) between the transport distances attributed to constrained and unconstrained boulders, suggesting that the pre-transport morphological setting exerts considerable control over boulder transport potential. The findings establish low to moderate storm waves as a key component in the evolution of the study site. More broadly, we claim that high-frequency, low-magnitude storms regularly modify these overlooked rocky coastal locations, suggesting that the hydrodynamic capability at such sites may previously have been underestimated. © 2020 John Wiley & Sons, Ltd.  相似文献   

8.
A method for estimating the instantaneous dynamic pressure near the base of ancient pyroclastic flows, using large lithic boulders from the late Pleistocene Abrigo Ignimbrite, is proposed here. The minimum instantaneous dynamic pressure is obtained by determining the minimum aerodynamic drag force exerted by a pyroclastic flow onto a stationary boulder that will allow the boulder to overcome static friction with the underlying substrate, and move within the flow. Consideration is given to the properties of the boulder (shape, roughness, size, density and orientation relative to the flow), substrate (type and hill slope angle), boulder-substrate interface (looseness of boulder, coefficient of static friction) and flow (coefficient of aerodynamic drag). Nineteen boulders from massive, lithic-rich ignimbrite deposits at two localities on Tenerife were assessed in this study. Minimum dynamic pressures required for Abrigo pyroclastic flows to move these boulders ranged from 5 to 38 kPa, which are comparable to dynamic pressures previously calculated from observations of the damage caused by recent pyroclastic flows. Considering the maximum possible range in flow density, the derived minimum velocity range for the Abrigo pyroclastic flows is 1.3 to 87 m s−1.  相似文献   

9.
Extreme wave events in coastal zones are principal drivers of geomorphic change. Evidence of boulder entrainment and erosional impact during storms is increasing. However, there is currently poor time coupling between pre‐ and post‐storm measurements of coastal boulder deposits. Importantly there are no data reporting shore platform erosion, boulder entrainment and/or boulder transport during storm events – rock coast dynamics during storm events are currently unexplored. Here, we use high‐resolution (daily) field data to measure and characterize coastal boulder transport before, during and after the extreme Northeast Atlantic extra‐tropical cyclone Johanna in March 2008. Forty‐eight limestone fine‐medium boulders (n = 46) and coarse cobbles (n = 2) were tracked daily over a 0.1 km2 intertidal area during this multi‐day storm. Boulders were repeatedly entrained, transported and deposited, and in some cases broken down (n = 1) or quarried (n = 3), during the most intense days of the storm. Eighty‐one percent (n = 39) of boulders were located at both the start and end of the storm. Of these, 92% were entrained where entrainment patterns were closely aligned to wave parameters. These data firmly demonstrate rock coasts are dynamic and vulnerable under storm conditions. No statistically significant relationship was found between boulder size (mass) and net transport distance. Graphical analyses suggest that boulder size limits the maximum longshore transport distance but that for the majority of boulders lying under this threshold, other factors influence transport distance. Paired analysis of 20 similar sized and shaped boulders in different morphogenic zones demonstrates that geomorphological control affects entrainment and transport distance – where net transport distances were up to 39 times less where geomorphological control was greatest. These results have important implications for understanding and for accurately measuring and modelling boulder entrainment and transport. Coastal managers require these data for assessing erosion risk. © 2016 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.  相似文献   

10.
Research on tsunami-induced coarse-clast transport is a field of rising interest since such deposits have been identified as useful proxies for extreme-wave events (tsunamis, storm waves) that provide crucial information for coastal hazard assessment. Physical experiments are, beside in-situ observations, the foundation of our understanding of how boulders are transported by tsunamis and provide clues to the development of empirical equations and numerical models describing the processes and fundamental mechanics. Nevertheless, investigating tsunami-induced boulder transport is a comparatively young discipline and only a few experimental studies focusing on this topic have been published so far. To improve the knowledge on nearshore tsunami hydrodynamics, physical experiments utilizing real-world boulder shapes have been carried out simulating three different shore types in a wave flume. Crucial insights were gained into boulder transport hydrodynamics and data resulting from the experiments were analysed in an empirical, statistical, quantitative and qualitative manner. The regular cuboid boulder – one of the specific shapes used in the experiments – showed the longest transport distances compared to a complex, natural boulder and a flat cuboid boulder, but also significant fluctuations regarding the total transport distance. The experiments indicate a strong influence of the shore shape on boulder transport behaviour. Experimental setups of increased mean transport distances also led to a higher spreading of results. This spreading was further amplified between the idealized-shaped cuboid and the complex-shaped boulder, which is associated with a lower drag coefficient. Due to the highly sensitive boulder reaction to divergent experimental setups, the need to recognize boundary conditions overcoming commonly considered parameters (e.g. roughness or Flatness Index) in field studies and numerical models is underlined. Beside the strong influence of initial boulder submergence and alignment, both the boulder shape and shore type influence the boulder transport pattern, increasing the total transport distance by more than 350% in some cases. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd  相似文献   

11.
A Schmidt test hammer was employed to assess the aggregate surface hardness of samples of boulders dug out from under late-lying snowpatches at sites in Switzerland, Scotland and Norway. The results were compared with an equivalent set of readings made on boulders at nearby snow-free control sites. The results in every case reveal that the aggregate surface hardness of boulders buried by late-lying snow is significantly less (at the 0·001 level) than that of boulders at the corresponding control sites. This result indicates that late-lying snow significantly enhances rock weathering, probably because boulder and rock surfaces are exposed to prolonged wetting by percolating meltwater under late-lying snowbeds.  相似文献   

12.
Low altitude flights by a micro‐drone were made in 2012 and 2013 over two boulder beaches in north‐western Spain. Geographical information system software was used to map the data. Boulder outlines from the first flight were recorded on 4796 clasts at Laxe Brava and 2508 clasts at Oia. Changes in location were identified by overlaying these outlines on the 2013 images. About 17.5% of the boulders (mean surface area 0.32 m2) moved at Laxe Brava and about 53% (mean surface area 0.23 m2) at Oia. Most movement on both beaches was between the mid‐tide to about 2 m above the high tidal level. The location and elevation of the highest points were also recorded on the 2012 images on 4093 boulders at Laxe Brava and 3324 boulders at Oia. These elevations were compared with the elevations at the same locations in 2013. The occurrence and scale of the elevational changes were generally consistent with changes in the boulder outlines. The study confirmed that boulder beaches can be cheaply and effectively monitored using high resolution, micro‐drone technology. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

13.
Tian Zhou  Ted Endreny 《水文研究》2012,26(22):3378-3392
River restoration projects have installed j‐hook deflectors along the outer bank of meander bends to reduce hydraulic erosion, and in this study we use a computational fluid dynamics (CFD) model to document how these deflectors initiate changes in meander hydrodynamics. We validated the CFD with streamwise and cross‐channel bankfull velocities from a 193° meander bend flume (inlet at 0°) with a fixed point bar and pool equilibrium bed but no j‐hooks, and then used the CFD to simulate changes to flow initiated by bank‐attached boulder j‐hooks (1st attached at 70°, then a 2nd at 160°). At bankfull and half bankfull flow the j‐hooks flattened transverse water surface slopes, formed backwater pools upstream of the boulders, and steepened longitudinal water slopes across the boulders and in the conveyance region off the mid‐channel boulder tip. Streamwise velocity and mass transport jets upstream of the j‐hooks were stilled, mid‐channel jets were initiated in the conveyance region, eddies with a cross‐channel axis formed below boulders, and eddies with a vertical axis were shed into wake zones downstream of the point bar and outer bank boulders. At half bankfull depth conveyance region flow cut toward the outer bank downstream of the j‐hook boulders and the secondary circulation cells were reshaped. At bankfull depth the j‐hook at 160° was needed to redirect bank‐impinging flow sent by the upstream j‐hook. The hooked boulder tip of both j‐hooks funneled surface flow into mid‐channel plunging jets, which reversed the secondary circulation cells and initiated 1 to 3 counter rotating cells through the entire meander. The main outer bank collision zone centered at 50° without the j‐hook was moved by the j‐hook to within and just beyond the 70° j‐hook boulder region, which displaced other mass transport zones downstream. J‐hooks re‐organized water surface slopes, streamwise and cross‐channel velocities, and mass transport patterns, to move shear stress from the outer bank and into the conveyance and mid‐channel zones at bankfull flow. At half bankfull flows a patch of high shear re‐attached to the outer bank below the downstream j‐hook. J‐hook geometry and placement within natural meanders can be analyzed with CFD models to help restoration teams reach design goals and understand hydraulic impacts. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

14.
Boundary shear stress and flow variability due to its interaction with main flow and secondary currents were investigated under conditions that extend previous research on trapezoidal channels. Secondary currents that scale with the flow depth were found over the entire width in all experiments. These findings contradict the widespread perception that secondary currents die out at a distance of 2.5 times the flow depth from the bank, a perception which is largely based on experiments with smooth boundaries. The reported results indicate that a stable pattern of secondary currents over the entire channel width can only be sustained over a fixed horizontal bed if the bed's roughness is sufficient to provide the required transverse oscillations in the turbulent shear stresses. Contrary to laboratory flumes, alluvial river bed always provide sufficient roughness. The required external forcing of this hydrodynamic instability mechanism is provided by the turbulence-generated near-bank secondary currents. The pattern of near-bank secondary currents depends on the inclination and the roughness of the bank. In all configurations, secondary currents result in a reduction of the bed shear stress in the vicinity of the bank and a heterogeneous bank shear stress that reaches a maximum close to the toe of the bank. Moreover, these currents cause transverse variability of 10–15% for the streamwise velocities and 0.2u*2–0.3u*?2 for the bed shear stress. These variations are insufficient to provide the flow variability required in river restoration projects, but nevertheless must be accounted for in the design of stable channels.  相似文献   

15.
Shear velocity u* is an important parameter in geophysical flows, in particular with respect to sediment transport dynamics. In this study, we investigate the feasibility of applying five standard methods [the logarithmic mean velocity profile, the Reynolds stress profile, the turbulent kinetic energy (TKE) profile, the wall similarity and spectral methods] that were initially developed to estimate shear velocity in smooth bed flow to turbulent flow over a loose bed of coarse gravel (D50 = 1·5 cm) under sub‐threshold conditions. The analysis is based on quasi‐instantaneous three‐dimensional (3D) full depth velocity profiles with high spatial and temporal resolution that were measured with an Acoustic Doppler Velocity Profiler (ADVP) in an open channel. The results of the analysis confirm the importance of detailed velocity profile measurements for the determination of shear velocity in rough‐bed flows. Results from all methods fall into a range of ± 20% variability and no systematic trend between methods was observed. Local and temporal variation in the loose bed roughness may contribute to the variability of the logarithmic profile method results. Estimates obtained from the TKE and Reynolds stress methods reasonably agree. Most results from the wall similarity method are within 10% of those obtained by the TKE and Reynolds stress methods. The spectral method was difficult to use since the spectral energy of the vertical velocity component strongly increased with distance from the bed in the inner layer. This made the choice of the reference level problematic. Mean shear stress for all experiments follows a quadratic relationship with the mean velocity in the flow. The wall similarity method appears to be a promising tool for estimating shear velocity under rough‐bed flow conditions and in field studies where other methods may be difficult to apply. This method allows for the determination of u* from a single point measurement at one level in the intermediate range (0·3 < h < 0·6). Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

16.
A remarkable accumulation of marine boulders located above the present spring tide level has occurred in two coastal lowlands of the Algarve (Portugal). The size‐interval of the particles studied here is seldom reported in the literature in association with extreme events of coastal inundation, thus making this study of relevance to many other coasts worldwide. The spreads of boulders extend several hundred meters inland and well beyond the present landward limit of storm activity. The marine origin of the boulders is demonstrated by well‐developed macro‐bioerosion sculpturing and in situ skeletal remains of endolithic shallow marine bivalves. The good state preservation of the fossils within the boulders indicates that abrasion during transport and redeposition was not significant. We envisage boulder deposition as having taken place during the Lisbon tsunami of ad 1755 through the simultaneous landward entrainment of coarse particles from nearshore followed by rapid shoreward suspended‐dominated transport and non‐graded redeposition that excluded significant sorting by weight or boulder dimensions. We use numerical hydrodynamic modeling of tsunami (and storm) waves to test the observational data on boulder dimensions (density, size, distribution) on the most likely processes of sediment deposition. This work demonstrates the effectiveness of the study of boulder deposits in tsunami reconstruction. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

17.
Sediment transport in the Erlenbach, a small stream with step‐pool morphology in the canton of Schwyz, Switzerland, has been monitored for more than 20 years. During this time three exceptional events (events with high sediment yield and long return times that have a large effect on channel morphology) have impacted the stream and partly or completely rearranged the existing step‐pool morphology. In the aftermath of the events, sediment transport rates at a given discharge and total sediment yield remained elevated for about a year or longer. For the last event, dated on the 20 June 2007, observations of boulder mobility and step destruction were used to interpret channel stability. Boulders with median diameters of up to 135 cm and estimated weights of more than 2·5 tons have moved during the 2007 event. Using hydraulic observations and shear stress calculations boulders up to 65 cm in diameter were predicted to have been fully mobile in peak conditions, even if form resistance and increased critical stresses needed for the initiation of motion in steep streams were taken into account. For two of the events, estimated peak shear stresses at the bed exceeded 1000 Pa, calculated both from observations of the flow hydraulics and from boulder mobility. This suggests that highly energetic flows occur relatively frequently in small, steep streams and that large boulders can be transported by fluvial processes in such streams. The observations have potential significance for hazard risk mitigation, stream engineering and restoration. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

18.
Seagrasses develop extensive or patchy underwater meadows in coastal areas around the world, forming complex, highly productive ecosystems. Seagrass canopies exert strong effects on water flow inside and around them, thereby affecting flow structure, sediment transport and benthic ecology. The influence of Zostera marina canopies on flow velocity, turbulence, hydraulic roughness and sediment movement was evaluated through laboratory experiments in 2 flumes and using live Z. marina and a mobile sand bed. Profiles of instantaneous velocities were measured and sediment movement was identified upstream, within and downstream of patches of different sizes and shoot density and at different free-stream velocities. Flow structure was characterised by time-averaged velocity, turbulence intensity and Turbulent Kinetic Energy (TKE). When velocity data were available above the canopy, they were fitted to the Law of the Wall and shear velocities and roughness lengths were calculated. When a seagrass canopy was present, three layers were distinguishable in the water column: (1) within canopy represented by low velocities and high turbulence; (2) transition zone around the height of the canopy, where velocities increased, turbulence decreased and TKE was high; and (3) above canopy where velocities were equal or higher than free-stream velocities and turbulence and TKE were lower than below. Shoot density and patch-width influenced this partitioning of the flow when the canopy was long enough (based on flume experiments, at least more than 1 m-long). The enhanced TKE observed at the canopy/water interface suggests that large-scale turbulence is generated at the canopy surface. These oscillations, likely to be related to the canopy undulations, are then broken down within the canopy and high-frequency turbulence takes place near the bed. This turbulence ‘cascade’ through the canopy may have an important impact on biogeochemical processes. The velocity above the canopy generally followed a logarithmic profile. Roughness lengths were higher above the canopy than over bare sand and increased with increasing distance from the leading edge of the canopy; however, they were still small (<1 cm) compared to other studies in the literature. Within and downstream of the canopy, sediment movement was observed at velocities below the threshold of motion. It was likely caused by the increased turbulence at those positions. This has large implications for sediment transport in coastal zones where seagrass beds develop.  相似文献   

19.
Here we present new observations of two different interactions between aeolian ridges and boulder fields on Mars that provide insight into past wind conditions. First, an analysis of ridge and boulder interactions at two test sites in Proctor Crater and an additional site ~430 km to the northeast shows that ridge geometry can be affected by changes in surface roughness elements generated by boulder fields. Second, a detailed examination of some of the boulder fields found that individual boulders can generate multi-armed ‘wakes’ that have no clear proxy on Earth. The ridge/boulder dynamics suggest that transverse aeolian ridges acted as roughness during their development, indicating that they formed at a length scale greater than wind ripples. The boulder wakes seem to represent an unusual interaction between flow separation and pre-exiting ridges; why this pattern is not observed on Earth remains uncertain.  相似文献   

20.
Schmidt‐hammer exposure‐age dating (SHD) was applied to the problem of dating the diachronous surfaces of five distal river‐bank boulder ramparts deposited by snow avalanches plunging into the Jostedøla and Sprongdøla rivers in the Jostedalsbreen region of southern Norway. Approaches to local high‐precision linear age calibration, which controlled in different ways for boulder roundness, were developed. The mean age (SHDmean) and the maximum age (SHDmax) of surface boulders were estimated for whole ramparts, crests and distal fringes. Interpretation was further assisted by reference to R‐value distributions. SHDmean ages (with 95% confidence intervals) ranged from 520 ± 270 years to 5375 ± 965 years, whereas SHDmax ages (expected to be exceeded by <5% of surface boulders) ranged from 675 to 9065 years. SHD ages from the Jostedøla ramparts tended to be older than those associated with the Sprongdøla, rampart crests were younger than the respective distal fringes, and use of relatively rounded boulders yielded more consistent SHD ages than angular boulders. The SHDmean ages indicate differences in recent levels of snow‐avalanche activity between ramparts and provide insights into rampart dynamics as boulders are deposited on rampart crests and, in smaller numbers, on the distal fringes. SHDmax ages provide minimum age estimates of rampart age (i.e. the time elapsed since the ramparts began to form) and suggest that at least some of the ramparts have been developing since the early Holocene. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号