首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Small amounts of felsic, evolved plutonic rocks, often called oceanic plagiogranites, always occur as veins or small stocks within the gabbroic section of the oceanic crust. Four major models are under debate to explain the formation of these rocks: (1) late-stage differentiation of a parental MORB melt, (2) partial melting of gabbroic rocks, (3) immiscibility in an evolved tholeiitic liquid, and (4) assimilation and partial melting of previously altered dikes. Recent experimental data in hydrous MORB-type systems are used to evaluate the petrogenesis of oceanic plagiogranites within the deep oceanic crust. Experiments show that TiO2 is a key parameter for the discrimination between different processes: TiO2 is relatively low in melts generated by anatexis of gabbros which is a consequence of the low TiO2 contents of the protolith, due to the depleted nature of typical cumulate gabbros formed in the oceanic crust. On the other hand, TiO2 is relatively high in those melts generated by MORB differentiation or liquid immiscibility. Since the TiO2 content of many oceanic plagiogranites is far below that expected in case of a generation by simple MORB differentiation or immiscibility, these rocks may be regarded as products of anatexis. This may indicate that partial melting processes triggered by water-rich fluids are more common in the deep oceanic crust than believed up to now. At slow-spreading ridges, seawater may be transported via high-temperature shear zones deeply into the crust and thus made available for melting processes.  相似文献   

2.
We performed hydrous partial melting experiments at shallow pressures (0.2 GPa) under slightly oxidizing conditions (NNO oxygen buffer) on oceanic cumulate gabbros drilled by ODP (Ocean Drilling Program) cruises to evaluate whether the partial melting of oceanic gabbro can generate SiO2-rich melts with compositions typical of oceanic plagiogranites. The experimental melts of the low-temperature runs broadly overlap those of natural plagiogranites. At 940 °C, the normalized SiO2 contents of the experimental melts of all systems range between 60 and 61 wt%, and at 900 °C between 63 and 68 wt%. These liquids are characterized by low TiO2 and FeOtot contents, similar to those of natural plagiogranites from the plutonic section of the oceanic crust, but in contrast to Fe and Ti-rich low-temperature experimental melts obtained in MORB systems at ~950 °C. The ~1,500-m-long drilled gabbroic section of ODP Hole 735B (Legs 118 and 176) at the Southwest Indian Ridge contains numerous small plagiogranitic veins often associated with zones which are characterized by high-temperature shearing. The compositions of the experimental melts obtained at low temperatures match those of the natural plagiogranitic veins, while the compositions of the crystals of low-temperature runs correspond to those of minerals from high-temperature microscopic veins occurring in the gabbroic section of the Hole 735B. This suggests that the observed plagiogranitic veins are products of a partial melting process triggered by a water-rich fluid phase. If the temperature estimations for high-temperature shear zones are correct (up to 1,000 °C), and a water-rich fluid phase is present, the formation of plagiogranites by partial melting of gabbros is probably a widespread phenomenon in the genesis of the ocean crust.Editorial responsibility: J. Hoefs  相似文献   

3.
Spinel peridotite xenoliths from the Atsagin-Dush volcanic centre, SE Mongolia range from fertile lherzolites to clinopyroxene(cpx)-bearing harzburgites. The cpx-poor peridotites typically contain interstitial fine-grained material and silicate glass and abundant fluid inclusions in minerals, some have large vesicular melt pockets that apparently formed after primary clinopyroxene and spinel. No volatile-bearing minerals (amphibole, phlogopite, apatite, carbonate) have been found in any of the xenoliths. Fifteen peridotite xenoliths have been analysed for major and trace elements; whole-rock Sr isotope compositions and O isotope composition of all minerals were determined for 13 xenoliths. Trace element composition and Sr-Nd isotope compositions were also determined in 11 clinopyroxene and melt pocket separates. Regular variations of major and moderately incompatible trace elements (e.g. heavy-rare-earth elements) in the peridotite series are consistent with its formation as a result of variable degrees of melt extraction from a fertile lherzolite protolith. The Nd isotope compositions of LREE (light-rare-earth elements)-depleted clinopyroxenes indicate an old (≥ 1 billion years) depletion event. Clinopyroxene-rich lherzolites are commonly depleted in LREE and other incompatible trace elements whereas cpx-poor peridotites show metasomatic enrichment that can be related to the abundance of fine-grained interstitial material, glass and fluid inclusions in minerals. The absence of hydrous minerals, ubiquitous CO2-rich microinclusions in the enriched samples and negative anomalies of Nb, Hf, Zr, and Ti in primitive mantle-normalized trace element patterns of whole rocks and clinopyroxenes indicate that carbonate melts may have been responsible for the metasomatic enrichment. Low Cu and S contents and high δ34S values in whole-rock peridotites could be explained by interaction with oxidized fluids that may have been derived from subducted oceanic crust. The Sr-Nd isotope compositions of LREE-depleted clinopyroxenes plot either in the MORB (mid-ocean-ridge basalt) field or to the right of the mantle array, the latter may be due to enrichment in radiogenic Sr. The LREE-enriched clinopyroxenes and melt pockets plot in the ocean island-basalt field and have Sr-Nd isotope signatures consistent with derivation from a mixture of the DMM (depleted MORB mantle) and EM (enriched mantle) II sources. Received: 18 January 1996 / Accepted: 23 August 1996  相似文献   

4.
The Balmuccia alpine lherzolite massif is a fragment of subcontinental lithospheric mantle emplaced into the lower crust 251 Ma ago during the final, extensional phase of the Hercynian orogeny. The Balmuccia massif consists largely of lherzolite, with subordinate harzburgite and dunite, and an array of dike rocks formed in the mantle before crustal emplacement. Dike rocks include websterite and bronzitite of the Cr-diopside suite, spinel clinopyroxenite and spinel-poor websterite of the Al-augite suite, gabbro and gabbronorite of the late gabbro suite, and hornblendite of the hydrous vein suite. The dike rocks display consistent intrusive relationships with one another, such that Cr-diopside suite dikes are always older than dikes and veins of the Al-augite suite, followed by dikes of the late gabbro suite and veins of the hydrous vein suite. Phlogopite (phl) veinlets that formed during interaction with the adjacent crust are the youngest event. There are at least three generations of Cr-diopside suite dikes, as shown by crosscutting relations. Dikes of the Al-augite suite form a polybaric fractionation series from spinel clinopyroxenite to websterite and feldspathic websterite, which crystallized from aluminous alkaline magmas at relatively high pressures. The late gabbro suite of dikes intruded at lower pressures, where plagioclase saturation occurred before significant mafic phase fractionation. Hornblendite veins have distinct compositional and isotopic characteristics, which show that they are not related to either the Al-augite suite or to the late gabbro dike suite. Cr-diopside suite dikes have Nd and Sr isotopic compositions similar to those of the host lherzolite and within the range of compositions defined by ocean–island basalts. The Al-augite dikes and the hornblendite veins have Sr and Nd isotopic compositions similar to those of Cr-diopside suite lherzolite and websterite. The late gabbro dikes have Nd and Sr isotopic compositions similar to mid-ocean ridge basalt (MORB) asthenosphere. Lead isotopic compositions for all of the samples fall in the present-day MORB field on the 208Pb/204Pb vs. 206Pb/204Pb diagram but are displaced above this field on the 207Pb/204Pb vs. 206Pb/204Pb diagram. There is overlap in the data between the Cr-diopside suite and the Al-augite and hydrous vein suites, with the exception that the Cr-diopside websterite dikes have more radiogenic Pb than any of the other samples. In Pb–Pb space as well, the late gabbro suite has the least radiogenic isotopic compositions, reflecting a change in magma source region during uplift. These data show that tectonic thinning of subcontinental lithospheric mantle during extension caused a change in the source regions of mantle-derived magmas from an ocean island basalt (OIB)-like lithosphere to the underlying MORB asthenosphere. They also demonstrate that the upper mantle acquires its heterogeneous isotopic character through several different processes, including in situ radiogenic growth, addition of asthenospheric melts, dike-wall rock ionic exchange, redistribution of the lithospheric dike and vein materials by melting, and in the late stages of emplacement, assimilation of crustal materials.  相似文献   

5.
Textural and petrological data of mantle peridotites sampled in the central and western parts of the Romanche Fracture Zone (Equatorial Atlantic) during the oceanographic expedition PRIMAR-96 (Russian R/V Gelendzhik) are presented. The studied rocks are mantle peridotites carrying patches, pockets and veins/dikes of magmatic origin, interpreted to be the product of various extents of magma impregnation on mantle partial melting residues. Estimated partial melting degrees based on clinopyroxene Ti/Zr ratios are in the ranges 5–13% and 18–20%. In highly impregnated samples, refertilization of residual peridotite minerals precludes a correct evaluation of the degree of melting. Magmatic products occur as pl±cpx±opx±ol±sp aggregates with various textural features. Interstitial pl-rich patches and gabbroic pockets are interpreted to derive from magma migration through the upper mantle by diffusive porous flow in the ductile part of the lithosphere and melt–rock reactions. Metasomatism of the host peridotites is testified by Ti and Cr increase in spinel and Ti, Sr, Zr, Y and LREE increase in clinopyroxene. Veins and dikes reflect channeled magma migration focused by brittle failures at shallower lithospheric levels. Minor or no chemical changes occurred in peridotites impregnated along fractures. The compositions of magmatic minerals in impregnated peridotites are consistent with derivation from variably fractionated melts of probably MORB type. Barometric estimates suggest that the Romanche peridotites were impregnated at minimum depths of ca. 9–12 km. Thermometric estimates for the peridotite hosts are in the range 750–1050 °C. The spread in temperature values is partly ascribed to localized heating by migrating melts of relatively cold peridotites. Our data and the occurrence of both fertile and depleted peridotites in a neighbouring area along the western Romanche FZ are in accord with the hypothesis of small-scale (<100 km) mantle heterogeneity along this fracture zone.  相似文献   

6.
Three types of ultramafic xenoliths from the Hyblean area (Sicily) show prime evidence for mantle metasomatism, namely: 1) Spinel-facies depleted harzburgite veined by phlogopite-bearing clinopyroxenite; 2) Amphibole-bearing harzburgite; and 3) Al-spinel websterite. (2) and (3) exhibit glassy pockets having respectively mugearitic and basanitic compositions, but a little amount of glass with low Ca and very low alkalis in (2). Glasses generally show trace element distributions consistent with the partial melting of pargasite-dominated mineral assemblages. Abundant Ca-Mg-carbonate globules immersed in these glassy pockets testify to immiscibility between silicate and carbonatite melts. Silicate melts and hydrous-silicate supercritical fluids, which underwent phase separation during fluxing throughout the semi-brittle lithospheric mantle, may account for such metasomatizing processes. The nature and abundance of some fluid-mobile elements in glasses and hydrous minerals (especially the Ca-poor glass, with B?=?59 ppm, Li?=?27 ppm, Ba?=?700 ppm and phlogopite, with Ba?=?8,465 ppm, Sr?=?260 ppm, F?=?5,700 ppm) suggest that some hydrous fluids may derive from hydrothermally altered oceanic crust. Conversely, metasomatizing silicate melts probably have a deep-seated origin. These results confirm previous suggestions on the key role of mantle metasomatism in the origin of some alkaline Hyblean magmas.  相似文献   

7.
The Late Ordovician Solund-Stavfjord ophiolite in western Norway represents a remnant of the Iapetus oceanic lithosphere that developed in a Caledonian marginal basin. The ophiolite contains three structural domains that display distinctively different crustal architecture that reflects the mode and nature of magmatic and tectonic processes operated during the multi-stage seafloor spreading evolution of this marginal basin. Domain I includes, from top to bottom, an extensive extrusive sequence, a transition zone consisting of dike swarms with screens of pillow breccias, a sheeted dike complex, and plutonic rocks composed mainly of isotropic gabbro and microgabbro. Extrusive rocks include pillow lavas, pillow breccias, and massive sheet flows and are locally sheared and mineralized, containing epidosites, sulfide-sulfate deposits, Fe-oxides, and anhydrite veins, reminiscent of hydrothermal alteration zones on the seafloor along modern mid-ocean ridges. A fossil lava lake in the northern part of the ophiolite consists of a >65-m-thick volcanic sequence composed of a number of separate massive lava units interlayered with pillow lavas and pillow breccia horizons. The NE-trending sheeted dike complex contains multiple intrusions of metabasaltic dikes with one- and two-sided chilled margins and displays a network of both dike-parallel normal and dike-perpendicular oblique-slip faults of oceanic origin. The dike-gabbro boundary is mutually intrusive and represents the root zone of the sheeted dike complex. The internal architecture and rock types of Domain I are analogous to those of intermediate-spreading oceanic crust at modern mid-ocean ridge environments. The ophiolitic units in Domain II include mainly sheeted dikes and plutonic rocks with a general NW structural grain and are commonly faulted against each other, although primary intrusive relations between the sheeted dikes and the gabbros are locally well preserved. The exposures of this domain occur only in the northern and southern parts of the ophiolite complex and are separated by the ENE-trending Domain III, in which isotropic to pegmatitic gabbros and dike swarms are plastically deformed along ENE-striking sinistral shear zones. These shear zones, which locally include fault slivers of serpentinite intrusions, are crosscut by N20°E-striking undeformed basaltic dike swarms that contain xenoliths of gabbroic material. The NW-trending sheeted dike complex in the northern part of Domain II curves into an ENE orientation approaching Domain III in the south. The anomalous nature of deformed crust in Domain III is interpreted to have developed within an oceanic fracture zone or transform fault boundary.REE chemistry of representative extrusive and dike rocks from all three domains indicates N- to E-MORB affinities of their magmas with high Th/Ta ratios that are characteristic of subduction zone environments. The magmatic evolution of Domain I encompasses closed-system fractional crystallization of high-Mg basaltic magmas in small ephemeral chambers, which gradually interconnected to form large chambers in which mixing of primary magmas with more evolved and fractionated magma caused resetting of magma compositions through time. The compositional range from high-Mg basalts to ferrobasalts within Domain I is reminiscent of modern propagating rift basalts. We interpret the NE-trending Domain I as a remnant of an intermediate-spread rift system that propagated northeastwards (in present coordinate system) into a pre-existing oceanic crust, which was developed along the NW-trending doomed rift (Domain II) in the marginal basin. The N20°E dikes laterally intruding into the anomalous oceanic crust in Domain III represent the tip of the rift propagator. The inferred propagating rift tectonics of the Solund-Stavfjord ophiolite is similar to the evolutionary history of the modern Lau back-arc basin in the SW Pacific and suggests a complex magmatic evolution of the Caledonian marginal basin via multi-stage seafloor spreading tectonics.  相似文献   

8.
The Taitao ophiolite of southern Chile lies 10 km from the buried extension of the Peru-Chile trench, and less than 50 km from the present position of the Nazca/South America/Antarctica triple junction. Plio-Pleistocene radiometric and paleontologic ages indicate its formation during ridge subduction, and an ultramafic rock, gabbro, sheeted dike, volcanic and sedimentary rock psuedostratigraphy suggests formation by typical accretionary processes for oceanic lithosphere. Yet major and trace element data show that mafic dikes and volcanic units are transitional from MORB to IAT, and there are abundant silicic volcanic units of calc-alkaline character that have high LIL element and light REE concentrations relative to oceanic plagiogranites. Sr and Nd isotopic data are consistent with that of modern oceanic suites, even though having a greater internal variability. Silicic volcanic units show the more enriched Sr and depleted Nd isotopic ratios relative to dike and gabbro samples. In addition to chemical distinctions, paleobathymetric data support a shallow water origin for some of the upper volcanic units and, assuming local compensation, suggest crustal thicknesses of continental proportion. In the vicinity of the Taitao ophiolite, and extending some 40 km landward of the plate margin, are a series of silicic stocks, sills, and plutons that were intruded into the forearc at the time of ridge collision and ophiolite generation. These calc-alkaline I-type granitoids are light REE enriched and have Sr and Nd isotopic compositions similar to those of the main volcanic chain 200 km landward. Chemically, some of the silicic intrusions are indistinguishable from volcanic units of the ophiolite. In general, major, trace, REE, and isotopic variations of both the ophiolite and the distributed intrusions are atypical of simple fractionation trends for basaltic liquids. Intermediate to silicic units lie along mixing hyperbolae between Taitao gabbro and either forearc sediment or metamorphic basement on a Nd---Sr correlation diagram, and these two crustal components support, respectively, either a 10–25% or 5–10% assimilation. Shutdown of magmatism, and therefore probably partial melting as well, appears to occur within 40 km of the trench, roughly spanning the depth interval for the disappearance of the plagioclase-lherzolite stability field as the zone of mantle upwelling is overridden by an increasing thickness of continental lithosphere. A deeper and more landward absence of partial melt related to the subducted ridge is supported by the correlation of the shutoff and re-initiation of arc volcanism over the northern and southern trailing edges of the postulated subcontinental asthenospheric window. Here, as well as elsewhere in the circum-Pacific, the general restriction of magmatism related to ridge subduction to near-trench settings supports a shallow (0 to 15 km) shutoff mechanism for adiabatic decompressive melting and a rather abrupt return to single-phase (solid) convective rise of mantle into an evolving asthenospheric window.  相似文献   

9.
Liquidus experimental studies on kimberlite, lamproite and lamprophyre compositions are reviewed with respect to the information they carry on the mantle origin of these rock types. This information is coupled with melting experiments on peridotite in the presence of H2O and mixed H2O+CO2 volatile species. The origin of most lamproites is explained by the melting of mica-harzburgite assemblages at depths ranging from 40km for leucite lamproites to more than 150km for olivine lamproites. Clinopyroxene-rich, silica-poor lamproites remain enigmatic, but are possibly derived by the melting of a mica-bearing ultramafic source richer in clinopyroxene and under more oxidized, CO2-bearing conditions. There are insufficient experimental studies on kimberlite to reasonably constrain their origin, and what remain are only general indications of the compositions of partial melts of mantle under volatile-bearing conditions. Melt compositions are not sufficiently well known to prevent very conceptual use of melt ‘names’ such as ‘kimberlitic’ or ‘carbonatitic’, and melts similar to alkaline and ultramafic lamprophyre may be hidden under this shroud. Clearer definition of the origins of alkaline melt compositions such as kimberlites and various lamprophyre types badly needs more exact bracketing of melt compositions of a variety of possible mantle mineral assemblages. The recently-developed sandwich reversal technique is ideally suited to study small degrees of partial melting, and could usefully be applied to lherzolitic and non-lherzolitic materials with hydrous and/or carbonate minerals.  相似文献   

10.
Clinopyroxene/melt pairs in strongly potassic silicate and carbonatite melts exhibit unusually high U/Th partitioning ratios of ˜ 3 and ˜ 2, respectively. These values are much higher than those found for aluminous clinopyroxenes in peridotite, and have the potential to cause significant (230Th)/(238U) isotope enrichment in volcanics. The potassic silicate (lamproite) and carbonatite melts correspond closely to the main agents of mantle metasomatism, indicating that clinopyroxene in metasomatized regions of the mantle may greatly affect U/Th disequilibria. Recycling of alkali pyroxenite veins in the oceanic lithosphere formed by solidification of melt in the extremities of the MORB melting region presents an alternative to eclogite recycling in MORB and OIB genesis.  相似文献   

11.
I. Kushiro 《Tectonophysics》1973,17(3):211-222
Partial melting experiments on spinel-lherzolite, a rock which probably occurs in relatively shallow parts of the oceanic upper mantle, demonstrate that alkali basaltic melt is formed at depths of at least 20 kbar whereas tholeiitic melt is formed at lower pressures (< 15 kbar) under anhydrous conditions. The specimen studied was a relatively iron-rich natural spinel-lherzolite (Fe/Mg+Fe=0.15) and the melts produced have ratios comparable to those obtained in basalts. Slight increase of degree of partial melting produces picritic melt over a wide pressure range. Under hydrous (water-excess) conditions, andesitic melt is produced by partial melting of the same natural spinel-lherzolite and a synthetic lherzolite. The melting experiments on two different abyssal tholeiites from the Mid-Atlantic Ridge suggest that the derivation of olivine tholeiite from a more mafic magma or a mantle peridotite (lherzolite) is possible, but is limited to depths shallower than 25 km under essentially anhydrous conditions, whereas plagioclase tholeiite may have been formed by fractional crystallization at depths of about 20 km in the presence of a small amount (～ 2 wt.%) of water.It is suggested that under mid-ocean ridges, partial melting of spinel-lherzolite at depths shallower than 60 km would produce olivine-tholeiitic magma, which differentiates at shallower levels (20–25 km) under either essentially anhydrous or hydrous (but vapor-absent) conditions to produce abyssal tholeiites of olivine-tholeiite type or plagioclase-tholeiite type. It may be also possible that the former olivine-tholeiite is generated by direct partial melting of plagioclase-lherzolite. Alkali basalts in the oceanic region may be generated at depths greater than 50 km by relatively small degree of partial melting. Along island arcs and continental margins, where the subduction zones probably exist, partial melting of lherzolite would take place in the presence of water that may be supplied by breakdown of hydrous minerals in the subducted oceanic crust, thereby producing andesitic magmas. High-alumina basalt magma could be produced by partial melting of the dehydrated oceanic crust in the subduction zone at depths between 40 and 60 km, where garnet is unstable above the solidus.  相似文献   

12.
We performed partial melting experiments at 1 and 1.5 GPa, and 1180–1400 °C, to investigate the melting under mantle conditions of an olivine-websterite (GV10), which represents a natural proxy of secondary (or stage 2) pyroxenite. Its subsolidus mineralogy consists of clinopyroxene, orthopyroxene, olivine and spinel (+garnet at 1.5 GPa). Solidus temperature is located between 1180 and 1200 °C at 1 GPa, and between 1230 and 1250 °C at 1.5 GPa. Orthopyroxene (±garnet), spinel and clinopyroxene are progressively consumed by melting reactions to produce olivine and melt. High coefficient of orthopyroxene in the melting reaction results in relatively high SiO2 content of low melt fractions. After orthopyroxene exhaustion, melt composition is controlled by the composition of coexisting clinopyroxene. At increasing melt fraction, CaO content of melt increases, whereas Na2O, Al2O3 and TiO2 behave as incompatible elements. Low Na2O contents reflect high partition coefficient of Na between clinopyroxene and melt (\(D_{{{\text{Na}}_{ 2} {\text{O}}}}^{{{\text{cpx}}/{\text{liquid}}}}\)). Melting of GV10 produces Quartz- to Hyperstene-normative basaltic melts that differ from peridotitic melts only in terms of lower Na2O and higher CaO contents. We model the partial melting of mantle sources made of different mixing of secondary pyroxenite and fertile lherzolite in the context of adiabatic oceanic mantle upwelling. At low potential temperatures (T P < 1310 °C), low-degree melt fractions from secondary pyroxenite react with surrounding peridotite producing orthopyroxene-rich reaction zones (or refertilized peridotite) and refractory clinopyroxene-rich residues. At higher T P (1310–1430 °C), simultaneous melting of pyroxenite and peridotite produces mixed melts with major element compositions matching those of primitive MORBs. This reinforces the notion that secondary pyroxenite may be potential hidden components in MORB mantle source.  相似文献   

13.
The Massif du Sud is a large ophiolitic complex that crops out in the southern region of New Caledonia (SW Pacific). It is dominated by harzburgite tectonite that locally shows a transitional gradation to massive dunite up section. Clinopyroxene, orthopyroxene and plagioclase progressively appear in dunite up to the transition to layered wehrlite and orthopyroxene–gabbro. The dunite–wehrlite and wehrlite–gabbro contacts are parallel and the latter defines the paleo-Moho.Highly depleted modal, mineral and bulk rock compositions indicate that harzburgites are residues after high degrees (20–30%) of partial melting mainly in the spinel-stability field. Their relative enrichment in HFSE, LREE and MREE is due to re-equilibration of melting residues with percolating melts. Dunite formed in the Moho transition zone by reaction between residual mantle harzburgite and olivine-saturated melts that led to pyroxene dissolution and olivine precipitation. Rare clinopyroxene and plagioclase crystallized in interstitial melt pores of dunite from primitive, low-TiO2, ultra-depleted liquids with a geochemical signature transitional between those of island arc tholeiites and boninites.Ascending batches of relatively high-SiO2, ultra-depleted melts migrated through the Moho transition zone and generated wehrlite by olivine dissolution and crystallization of clinopyroxene, orthopyroxene and plagioclase in variable amounts. These liquids were more evolved and were produced by higher degrees of melting or from a more depleted source compared with melts that locally crystallized clinopyroxene in dunite. Ultra-depleted magmas, non-cogenetic with those that formed the Moho transition zone, ascended to the lower crust and generated gabbroic cumulates with subduction-related affinity. Thus, the ultramafic and mafic rocks in the Moho transition zone and lower crust of the Massif du Sud ophiolite are not products of fractional crystallization from a single magma-type but are the result of migration and accumulation of different melts in a multi-stage evolution.The record of high partial melting in the mantle section, and migration and accumulation of ultra-depleted subduction-related melts in the Moho transition zone and lower crust support that the Massif du Sud ophiolite is a portion of forearc lithosphere generated in an extensional regime during the early phases of the subduction zone evolution. Our results show the existence of different types of ultra-depleted melt compositions arriving at the Moho transition zone and lower crust of an infant intraoceanic paleo-arc. Ultra-depleted melts may thus be a significant component of the melt budget generated in oceanic spreading forearcs prior to aggregation and mixing of a large range of melt compositions in the crust.  相似文献   

14.
The Kangâmiut dike swarm in West Greenland contains numerous composite dikes with mafic margins and andesitic centers. Internal chilled margins show that the andesitic centers intruded into the middle of the mafic dikes. Major element systematics indicate that the fractionation of olivine, clinopyroxene, plagioclase and Fe–Ti oxides drove the evolution of the Kangâmiut parental magma during its transition from mafic to andesitic compositions. Incompatible trace elements show a marked relative decrease in middle and heavy rare-earth elements (REE) between the mafic margins and the andesitic centers. The decrease in the REE is not explicable by olivine, clinopyroxene, plagioclase and Fe–Ti oxide fractionation or by the fractionation of the accessory phases apatite, zircon or garnet. Rb–Sr and Sm–Nd isotopes from margin and center pairs from these composite dikes are nearly identical indicating that crustal contamination had little to no affect on their evolution. Trace element modeling utilizing the mixing of evolved Kangâmiut magmas and low degree melts derived from partial melting of garnet lherzolite produce excellent fits with the trace element patterns for the andesitic centers. These models suggest that the late-stage evolution of the Kangâmiut dikes included input of mantle melts produced during the end stages of rifting.  相似文献   

15.
云南哀牢山蛇绿岩的矿物学研究   总被引：3，自引：1，他引：2  
云南哀牢山蛇绿岩由变橄榄岩、堆晶杂岩、火山熔岩和硅质岩等四个单元组成,其主要矿物有橄榄石,斜方辉石、单斜辉石、尖晶石、斜长石、角闪石、石榴子石等,这些矿物均已不同程度地遭到蚀变、橄榄石、斜方辉石的化学成分显示蛇绿岩中的二辉橄榄岩为原始地幔岩;是石的化学特征表明蛇绿岩中的橄榄岩为深海橄榄岩;单斜辉石的成分反映二辉橄榄岩经历过熔融作用,堆晶杂央才基性熔岩具有火山弧和洋底玄武岩的特征。  相似文献   

16.
 Geochemical data have been interpreted as requiring that a significant fraction of the melting in MORB source regions takes place in the garnet peridotite field, an inference that places the onset of melting at ≥80 km. However, if melting begins at such great depths, most models for melting of the suboceanic mantle predict substantially more melting than that required to produce the 7±1 km thickness of crust at normal ridges. One possible resolution of this conflict is that MORBs are produced by melting of mixed garnet pyroxenite/spinel peridotite sources and that some or all of the “garnet signature” in MORB is contributed by partial melting of garnet pyroxenite layers or veins, rather than from partial melting of garnet peridotite. Pyroxenite layers or veins in peridotite will contribute disproportionately to melt production relative to their abundance, because partial melts of pyroxenite will be extracted from a larger part of the source region than peridotite partial melts (because the solidus of pyroxenite is at lower temperature than that of peridotite and is encountered along an adiabat 15–25 km deeper than the solidus of peridotite), and because melt productivity from pyroxenite during upwelling is expected to be greater than that from peridotite (pyroxenite melt productivity will be particularly high in the region before peridotite begins melting, owing to heating from the enclosing peridotite). For reasonable estimates of pyroxenite and peridotite melt productivities, 15–20% of the melt derived from a source region composed of 5% pyroxenite and 95% peridotite will come from the pyroxenite. Most significantly, garnet persists on the solidus of pyroxenite to much lower pressures than those at which it is present on the solidus of peridotite, so if pyroxenite is present in MORB source regions, it will probably contribute a garnet signature to MORB even if melting only occurs at pressures at which the peridotite is in the spinel stability field. Partial melting of a mixed spinel peridotite/garnet pyroxenite mantle containing a few to several percent pyroxenite can explain quantitatively many of the geochemical features of MORB that have been attributed to the onset of melting in the stability field of garnet lherzolite, provided that the pyroxenite compositions are similar to the average composition of mantle-derived pyroxene-rich rocks worldwide or to reasonable estimates of the composition of subducted oceanic crust. Sm/Yb ratios of average MORB from regions of typical crustal thickness are difficult to reconcile with derivation by melting of spinel peridotite only, but can be explained if MORB sources contain ∼5% garnet pyroxenite. Relative to melting of spinel peridotite alone, participation of model pyroxenite in melting lowers aggregate melt Lu/Hf without changing Sm/Nd ratios appreciably. Lu/Hf-Sm/Nd systematics of most MORB can be accounted for by melting of a spinel peridotite/garnet pyroxenite mantle provided that the source region contains 3–6% pyroxenite with ≥20% modal garnet. However, Lu/Hf-Sm/Nd systematics of some MORB appear to require more complex melting regimes and/or significant isotopic heterogeneity in the source. Another feature of the MORB garnet signature, (230Th)/(238U)>1, can also be produced under these conditions, although the magnitude of (230Th)/(238U) enrichment will depend on the rate of melt production when the pyroxenite first encounters the solidus, which is not well-constrained. Preservation of high (230Th)/(238U) in aggregated melts of mixed spinel peridotite/garnet pyroxenite MORB sources is most likely if the pyroxenites have U concentrations similar to that expected in subducted oceanic crust or to pyroxenite from alpine massifs and xenoliths. The abundances of pyroxenite in a mixed source that are required to explain MORB Sm/Yb, Lu/Hf, and (230Th)/(238U) are all similar. If pyroxenite is an important source of garnet signatures in MORB, then geochemical indicators of pyroxenite in MORB source regions, such as increased trace element and isotopic variability or more radiogenic Pb or Os, should correlate with the strength of the garnet signature. Garnet signatures originating from melts of the garnet pyroxenite components of mixed spinel peridotite/garnet pyroxenite sources would also be expected to be stronger in regions of thin crust. Received: 15 February 1995/Accepted: 7 February 1996  相似文献   

17.
This paper presents field, petrographic–structural and geochemical data on spinel and plagioclase peridotites from the southern domain of the Lanzo ophiolitic peridotite massif (Western Alps). Spinel lherzolites, harzburgites and dunites crop out at Mt. Arpone and Mt. Musinè. Field evidence indicates that pristine porphyroclastic spinel lherzolites are transformed to coarse granular spinel harzburgites, which are in turn overprinted by plagioclase peridotites, while strongly depleted spinel harzburgite and dunite bands and bodies replace the plagioclase peridotites. On the northern flank of Mt. Arpone, deformed, porphyroclastic (lithospheric) lherzolites, with diffuse pyroxenite banding, represent the oldest spinel-facies rocks. They show microstructures of a composite subsolidus evolution, suggesting provenance from deeper (asthenospheric) mantle levels and accretion to the lithosphere. These protoliths are locally transformed to coarse granular (reactive) spinel harzburgites and dunites, which show textures reminiscent of melt/rock reaction and geochemical characteristics suggesting that they are products of peridotite interaction with reactively percolating melts. Geochemical data and modelling suggest that <1–5% fractional melting of spinel-facies DMM produced the injected melts. Plagioclase peridotites are hybrid rocks resulting from pre-existing spinel peridotites and variable enrichment of plagioclase and micro-gabbroic material by percolating melts. The impregnating melts attained silica-saturation, as testified by widespread orthopyroxene replacement of olivine, during open system migration in the lithosphere. At Mt. Musinè, coarse granular spinel harzburgite and dunite bodies replace the plagioclase peridotites. Most of these replacive, refractory peridotites have interstitial magmatic clinopyroxene with trace element compositions in equilibrium with MORB, while some Cpx have REE-depleted patterns suggesting transient geochemical features of the migrating MORB-type melts, acquired by interaction with the ambient plagioclase peridotite. These replacive spinel harzburgite and dunite bodies are interpreted as channels exploited for focused and reactive migration of silica-undersaturated melts with aggregate MORB compositions. Such melts were unrelated to the silica-saturated melts that refertilized the pre-existing plagioclase peridotites. Finally, MORB melt migration occurred along open fractures, now recorded as gabbroic dikes.

Our data document the complexity of rock-types and mantle processes in the South Lanzo peridotite massif and describe a composite tectonic and magmatic scenario that is not consistent with the “asthenospheric scenario” proposed by previous authors. We envisage a “transitional scenario” in which extending subcontinental lithospheric mantle was strongly modified (both depleted and refertilized) by early melts with MORB-affinity formed by decompression partial melting of the upwelling asthenosphere, during pre-oceanic rifting and lithospheric thinning in the Ligurian Tethys realm.  相似文献   


18.
藏北永珠席状岩墙群的发现--海底扩张的证据   总被引：2，自引：2，他引：2  
新发现的永珠席状岩墙群位于西藏北部班公错一怒江缝合带与雅鲁藏布江缝合带之间。永珠席状岩墙群规模之大、结构之完整在国内尚属罕见。岩石由蚀变辉绿岩、辉长岩扣辉绿玢岩岩墙组成，向上与枕状玄武岩呈渐变过渡扣侵入接触关系，发育有单侧或双侧冷凝边，具高CaO、Al2O3、MgO、FeO、Fe2O3，低TiO2、P2O5的特点，为亚碱性系列岩石。微量元素主要显示MORB的特征，部分判别图显示MORB扣岛弧拉斑玄武岩（IAT）的过渡特征，推测可能产于弧后盆地环境。依据上覆放射虫硅质岩的时代扣枕状玄武岩、岩墙群同位素年龄，确定永珠席状岩墙群形成的时间可能为中休罗世-早白垩世。这一发现为中特提斯海时期古海底扩张提供了新的证据。  相似文献   

19.
The concentrations of Ir, Ru, Pt and Pd have been determined in 29 Mid-Oceanic Ridge basaltic (MORB) glasses from the Pacific (N = 7), the Atlantic (N = 10) and the Indian (N = 11) oceanic ridges and the Red Sea (N = 1) spreading centers. The effect of sulfide segregation during magmatic differentiation has been discussed with sample suites deriving from parental melts produced by high (16%) and low (6%) degrees of partial melting, respectively. Both sample suites define positive and distinct covariation trends in platinum-group elements (PGE) vs. Ni binary plots. The high-degree melting suite displays, for a given Ni content, systematically higher PGE contents relative to the low-degree melting suite. The mass fraction of sulfide segregated during crystallization (Xsulf), the achievement of equilibrium between sulfide melt and silicate melts (Reff), and the respective proportions between fractional and batch crystallization processes (Sb) are key parameters for modeling the PGE partitioning behavior during S-saturated MORB differentiation. Regardless of the model chosen, similar sulfide melt/silicate melt partition coefficients for Ir, Ru, Pt and Pd are needed to model the sulfide segregation process, in agreement with experimental data. When corrected for the effect of magmatic differentiation, the PGE data display coherent variations with partial melting degrees. Iridium, Ru and Pt are found to be compatible in nonsulfide minerals whereas the Pd behaves as a purely chalcophile element. The calculated partition coefficients between mantle sulfides and silicate melts (assuming a PGE concentration in the oceanic mantle at ∼0.007 × CI-chondritic abundances) increase from Pd (∼103) to Ir (∼105). This contrasting behavior of PGE during S-saturated magmatic differentiation and mantle melting processes can be accounted for by assuming that Monosufide Solid Solution (Mss) controls the PGE budget in MORB melting residues whereas MORB differentiation processes involve Cu-Ni-rich sulfide melt segregation.  相似文献   

20.
       根据大陆下地壳的成分、含水基性岩体系部分熔融的基本原理和实验岩石学资料,本文对大陆下地壳的熔融机制展 开了讨论,并在此基础上对比实验熔体与大别山C 型埃达克岩的成分,进而探讨约束源岩成分、熔融的温压条件和部分熔 融程度。研究结果表明,大陆下地壳总体上是中- 基性（SiO2　50%~60% ）和含少量水的,在缺乏流体相条件下伴随含水 矿物脱水的部分熔融是下地壳产生含水长英质熔体和无水残留体的主要机制。角闪岩在中等压力下（1.0~1.2 GPa,相当于 35~40 km）理论上能够产生石榴石含量超过~20% 的熔融残余,从而使得与之平衡的长英质熔体具有低Y,高Sr/Y 和La/Yb 比值等埃达克岩特征。基于水活度模型和变质基性岩p -t 相图的估算显示,含有40%~60% 角闪石的源岩（含水0.8%~1.2%） 在~950 ℃能够得到最大为15%~20% 的熔体,该熔体分数满足熔体分离的要求。大别山C型埃达克岩主要为高钾钙碱性系 列（K2O 3.5%~5%）,与实验熔体成分的对比可知,其无法由低钾源岩在合理的部分熔融程度形成。根据钾在角闪岩部分熔 融过程过表现为强不相容元素的原理,利用合理假设的残余体组合得到的分配系数,估算K2O 含量为~1% 的源岩在熔融程 度为15%~20% 的情况下能够得到类似大别山C 型埃达克岩成分的熔体。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号