首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Abstract– In the context of the MEMIN project, a hypervelocity cratering experiment has been performed using a sphere of the iron meteorite Campo del Cielo as projectile accelerated to 4.56 km s?1, and a block of Seeberger sandstone as target material. The ejecta, collected in a newly designed catcher, are represented by (1) weakly deformed, (2) highly deformed, and (3) highly shocked material. The latter shows shock‐metamorphic features such as planar deformation features (PDF) in quartz, formation of diaplectic quartz glass, partial melting of the sandstone, and partially molten projectile, mixed mechanically and chemically with target melt. During mixing of projectile and target melts, the Fe of the projectile is preferentially partitioned into target melt to a greater degree than Ni and Co yielding a Fe/Ni that is generally higher than Fe/Ni in the projectile. This fractionation results from the differing siderophile properties, specifically from differences in reactivity of Fe, Ni, and Co with oxygen during projectile‐target interaction. Projectile matter was also detected in shocked quartz grains. The average Fe/Ni of quartz with PDF (about 20) and of silica glasses (about 24) are in contrast to the average sandstone ratio (about 422), but resembles the Fe/Ni‐ratio of the projectile (about 14). We briefly discuss possible reasons of projectile melting and vaporization in the experiment, in which the calculated maximum shock pressure does not exceed 55 GPa.  相似文献   

2.
Abstract— We investigated the compositional characteristics of schlieren-rich, holohyaline impact glasses from Ries, Wabar, and Meteor Crater using a Cameca SX 100 scanning electron microprobe. This instrument is capable of producing detailed maps of major elements at spatial resolutions of <10 μm. The objective was to characterize the composition of an unusually large number of individual schlieren and to evaluate details of the process that causes melts of lithologically diverse target rocks to mix on scales of micrometers. The Ries and Meteor Crater impacts involved lithologically heterogeneous targets; whereas, Wabar Crater formed in relatively uniform dune sand. Texturally heterogeneous, schlieren-rich glasses from the Ries Crater illustrate that schlieren of highly variable color can be surprisingly similar in composition, as first detailed by Stähle (1972). Consistent with these earlier findings, most schlieren represent mixtures of diverse rock melts; their compositions deviate only subtly from the average melt and do not resemble monomineralic melts nor binary mixtures of major rock-forming minerals. A specific population of schlieren is enriched in mafic elements (Mg, Fe, and Ca), which suggests incomplete homogenization of an amphibolite progenitor. In the case of Wabar Crater, a compositionally simple melt of dune sand mixed with projectile (IIIA iron meteorite) materials, and specific schlieren are variable mixtures of these two progenitors. The optically homogeneous glass from Meteor Crater is compositionally homogeneous as well, which suggests ideal mixing of such diverse lithologies as platform carbonates, sandstone, and a class IIIA iron meteorite. The mixing of projectile and target melts at Wabar and Meteor Crater unambiguously demonstrates that melts initially produced in distinctly different stratigraphic/structural locations will undergo wholesale mixing, if not homogenization. Also, the projectile melts unquestionably formed relatively early in the cratering process, and their dissemination throughout the prospective melt volume, albeit at variable concentration levels, suggests that the entire mixing process may be an early cratering feature. This also follows from the fact that we investigated ballistic melt ejecta, which thereby eliminates all of those mixing processes that may additionally operate during the pooling and generation of massive melt-ponds following gravitational collapse of large, structurally complex craters. Substantial turbulence ranging from field dimensions to microscopic scales seems inescapable to accomplish the observed degree of mixing, yet this is not readily inferred from current models of macroscopic material motions during hypervelocity impact.  相似文献   

3.
We simulated entrainment of carbonates (calcite, dolomite) in silicate impact melts by 1-bar laser melting of silicate–carbonate composite targets, using sandstone, basalt, calcite marble, limestone, dolomite marble, and iron meteorite as starting materials. We demonstrate that carbonate assimilation by silicate melts of variable composition is extremely fast (seconds to minutes), resulting in contamination of silicate melts with carbonate-derived CaO and MgO and release of CO2 at the silicate melt–carbonate interface. We identify several processes, i.e., (1) decomposition of carbonates releases CO2 and produces residual oxides (CaO, MgO); (2) incorporation of residual oxides from proximally dissociating carbonates into silicate melts; (3) rapid back-reactions between residual CaO and CO2 produce idiomorphic calcite crystallites and porous carbonate quench products; (4) high-temperature reactions between Ca-contaminated silicate melts and carbonates yield typical skarn minerals and residual oxide melts; (5) mixing and mingling between Ca- or Ca,Mg-contaminated and Ca- or Ca,Mg-normal silicate melts; (6) precipitation of Ca- or Ca,Mg-rich silicates from contaminated silicate melts upon quenching. Our experiments reproduce many textural and compositional features of typical impact melts originating from silicate–carbonate targets. They reinforce hypotheses that thermal decomposition of carbonates, rapid back-reactions between decomposition products, and incorporation of residual oxides into silicate impact melts are prevailing processes during impact melting of mixed silicate–carbonate targets. However, by comparing our results with previous studies and thermodynamic considerations on the phase diagrams of calcite and quartz, we envisage that carbonate impact melts are readily produced during adiabatic decompression from high shock pressure, but subsequently decompose due to heat influx from coexisting silicate impact melts or hot breccia components. Under certain circumstances, postshock conditions may favor production and conservation of carbonate impact melts. We conclude that the response of mixed carbonate–silicate targets to impact might involve melting and decomposition of carbonates, the dominant response being governed by a complex variety of factors.  相似文献   

4.
Abstract— We investigated the ballistically dispersed melts from Meteor Crater, Arizona, USA to determine the stratigraphic extent of its melt zone from the compositional relationship of melts and target rocks. Most melt particles are crystallized, hydrated, and oxidized; pristine glasses are rare. Hydration and oxidation occurred at ambient temperatures long after the impact. The preserved glasses are generally clear and texturally homogeneous, but unlike typical impact melts, they have unusually heterogeneous compositions, both within individual particles and from sample to sample. For example, the average SiO2 for individual particles ranges from 43 to 65%. The projectile content is unusually high and it is distributed bimodally, with specific samples containing either 5–10% or 20–30% FeO. These compositional heterogeneities most likely reflect the high carbonate content of the target rocks and the release of copious CO2 that dispersed the melts, thereby terminating melt flow and mixing. The high projectile content and the CO2 depleted residue of purely sedimentary rocks produced mafic melts that crystallized fine‐grained olivine and pyroxene. The melts fall into three compositional groups reflecting variable proportions of the major target formations, Moenkopi, Kaibab, and Coconino. Least‐square mixing calculations revealed one group to contain 55% Moenkopi, 40% quartz‐rich, upper Kaibab, and 5% meteorite, suggesting a source depth of <30 m from the pre‐impact surface. The other two melt groups have higher contents of meteorite (15–20%) and Kaibab (50–70%) and contain more SiO2 than average Kaibab. The additional quartz may have been derived from Coconino or the upper Kaibab, implying melt depths >90 m or <30 m, respectively. Additional studies, especially hydrocode calculations, are needed to better understand the source depth of these melts and their exceptionally high projectile content.  相似文献   

5.
Abstract– We carried out hypervelocity cratering experiments with steel projectiles and sandstone targets to investigate the structural and mineralogical changes that occur upon impact in the projectile and target. The masses of coherent projectile relics that were recovered in different experiments ranged between 58% and 92% of their initial projectile masses. A significant trend between impact energy, the presence of water in the target, and the mass of projectile relics could not be found. However, projectile fragmentation seems to be enhanced if the target contains substantial amounts of water. Two experiments that were performed with 1 cm sized steel projectiles impacting at 3400 and 5300 m s?1 vertically onto dry Seeberger sandstone were investigated in detail. The recovered projectiles are intensely plastically deformed. Deformation mechanisms include dislocation glide and dislocation creep. The latter led to the formation of subgrains and micrometer‐sized dynamically recrystallized grains. In case of the 5300 m s?1 impact experiment, this deformation is followed by grain annealing. In addition, brittle fracturing and friction‐controlled melting at the surface along with melting and boiling of iron and silica were observed in both experiments. We estimated that heating and melting of the projectile impacting at 5300 m s?1 consumed 4.4% of the total impact energy and was converted into thermal energy and heat of fusion. Beside the formation of centimeter‐sized projectile relics, projectile matter is distributed in the ejecta as spherules, unmelted fragments, and intermingled iron‐silica aggregates.  相似文献   

6.
Dar al Gani (DaG) 400, Meteorite Hills (MET) 01210, Pecora Escarpment (PCA) 02007, and MacAlpine Hills (MAC) 88104/88105 are lunar regolith breccia meteorites that provide sampling of the lunar surface from regions of the Moon that were not visited by the US Apollo or Soviet Luna sample return missions. They contain a heterogeneous clast population from a range of typical lunar lithologies. DaG 400, PCA 02007, and MAC 88104/88105 are primarily feldspathic in nature, and MET 01210 is composed of mare basalt material mixed with a lesser amount of feldspathic material. Here we present a compositional study of the impact melt and impact melt breccia clast population (i.e., clasts that were generated in impact cratering melting processes) within these meteorites using in situ electron microprobe and LA‐ICP‐MS techniques. Results show that all of the meteorites are dominated by impact lithologies that are relatively ferroan (Mg#<70), have high Sc/Sm ratios (typically >10), and have low incompatible trace element (ITE) concentrations (i.e., typically <3.2 ppm Sm, <1.5 ppm Th). Feldspathic impact melt in DaG 400, PCA 02007, and MAC 88104/05 are similar in composition to that estimated composition for upper feldspathic lunar crust ( Korotev et al. 2003 ). However, these melt types are more mafic (i.e., less Eu, less Sr, more Sc) than feldspathic impact melts returned by the Apollo 16 mission (e.g., the group 3 and 4 varieties). Mafic impact melt clasts are common in MET 01210 and less common in PCA 02007 and MAC 88104/05. We show that unlike the Apollo mafic impact melt groups ( Jolliff 1998 ), these meteorite impact melts were not formed from melting large amounts of KREEP‐rich (typically >10 ppm Sm), High Magnesium Suite (typically >70 Mg#) or High Alkali Suite (high ITEs, Sc/Sm ratios <2) target rocks. Instead the meteorite mafic melts are more ferroan, KREEP‐poor and Sc‐rich, and represent mixing between feldspathic lithologies and low‐Ti or very low‐Ti (VLT) basalts. As PCA 02007 and MAC 88104/05 were likely sourced from the Outer‐Feldspathic Highlands Terrane our findings suggest that these predominantly feldspathic regions commonly contain a VLT to low‐Ti basalt contribution.  相似文献   

7.
Olivine‐dominated (70–80 modal %) achondrite meteorite Lewis Cliff (LEW) 88763 originated from metamorphism and limited partial melting of a FeO‐rich parent body. The meteorite experienced some alteration on Earth, evident from subchondritic Re/Os, and redistribution of rhenium within the sample. LEW 88763 is texturally similar to winonaites, has a Δ17O value of ?1.19 ± 0.10‰, and low bulk‐rock Mg/(Mg+Fe) (0.39), similar to the FeO‐rich cumulate achondrite Northwest Africa (NWA) 6693. The similar bulk‐rock major‐, minor‐, and trace‐element abundances of LEW 88763, relative to some carbonaceous chondrites, including ratios of Pd/Os, Pt/Os, Ir/Os, and 187Os/188Os (0.1262), implies a FeO‐ and volatile‐rich precursor composition. Lack of fractionation of the rare earth elements, but a factor of approximately two lower highly siderophile element abundances in LEW 88763, compared with chondrites, implies limited loss of Fe‐Ni‐S melts during metamorphism and anatexis. These results support the generation of high Fe/Mg, sulfide, and/or metal‐rich partial melts from FeO‐rich parent bodies during partial melting. In detail, however, LEW 88763 cannot be a parent composition to any other meteorite sample, due to highly limited silicate melt loss (0 to <<5%). As such, LEW 88763 represents the least‐modified FeO‐rich achondrite source composition recognized to date and is distinct from all other meteorites. LEW 88763 should be reclassified as an anomalous achondrite that experienced limited Fe,Ni‐FeS melt loss. Lewis Cliff 88763, combined with a growing collection of FeO‐rich meteorites, such as brachinites, brachinite‐like achondrites, the Graves Nunataks (GRA) 06128/9 meteorites, NWA 6693, and Tafassasset, has important implications for understanding the initiation of planetary differentiation. Specifically, regardless of precursor compositions, partial melting and differentiation processes appear to be similar on asteroidal bodies spanning a range of initial oxidation states and volatile contents.  相似文献   

8.
The Martian meteorites comprise mantle‐derived mafic to ultramafic rocks that formed in shallow intrusions and/or lava flows. This study reports the first in situ platinum‐group element data on chromite and ulvöspinel from a series of dunitic chassignites and olivine‐phyric shergottites, determined using laser‐ablation ICP‐MS. As recent studies have shown that Ru has strongly contrasting affinities for coexisting sulfide and spinel phases, the precise in situ analysis of this element in spinel can provide important insights into the sulfide saturation history of Martian mantle‐derived melts. The new data reveal distinctive differences between the two meteorite groups. Chromite from the chassignites Northwest Africa 2737 (NWA 2737) and Chassigny contained detectable concentrations of Ru (up to ~160 ppb Ru) in solid solution, whereas chromite and ulvöspinel from the olivine‐phyric shergottites Yamato‐980459 (Y‐980459), Tissint, and Dhofar 019 displayed Ru concentrations consistently below detection limit (<42 ppb). The relatively elevated Ru signatures of chromite from the chassignites suggest a Ru‐rich (~1–4 ppb) parental melt for this meteorite group, which presumably did not experience segregation of immiscible sulfide liquids over the interval of mantle melting, melt ascent, and chromite crystallization. The relatively Ru‐depleted signature of chromite and ulvöspinel from the olivine‐phyric shergottites may be the consequence of relatively lower Ru contents (<1 ppb) in the parental melts, and/or the presence of sulfides during the crystallization of the spinel phases. The results of this study illustrate the significance of platinum‐group element in situ analysis on spinel phases to decipher the sulfide saturation history of magmatic systems.  相似文献   

9.
Abstract— Fusion crusts develop on all meteorites during their passage through the atmosphere but have been little studied. We have characterized the textures and compositions of the fusion crusts of 73 stony meteorites to identify the nature of meteorite ablation spheres (MAS) and constrain the processes operating during the entry heating. Most chondrite fusion crusts are porphyritic and are dominated by olivine, glass, and accessory magnetite; whereas those of the achondrites are mainly glassy. Chondrite fusion crusts contain sulphide droplets with high-Ni contents (>55 wt%). The partially melted substrate of ordinary chondrites (underlying the outer melted crusts) are dominated by silicate glass and composite metal, sulphide, and Cr-bearing Fe-oxide droplets that form as coexisting immiscible liquids. Enstatite chondrite substrates contain Cr- and Mn- bearing sulphides. The substrates of the carbonaceous chondrites comprise a sulphide-enriched layer of matrix. The compositions of melted crusts are similar to those of the bulk meteorite. However, differences from whole rock suggest that three main processes control their chemical evolution: (1) the loss and reaction of immiscible Fe-rich liquids, (2) mixing between substrate partial melts and bulk melts of the melted crust, and (3) the loss of volatile components by evaporation and degassing. Data from fusion crusts suggest that MAS produced at low altitude have compositions within the range of those of silicate-dominated cosmic spherules that are formed by the melting dust particles. Meteorite ablation spheres produced at high altitude probably have compositions very different from bulk meteorite and will resemble cosmic spherules derived from coarse-grained precursors.  相似文献   

10.
Abstract– The 45 m in diameter Kamil impact crater was formed <5000 yr ago in the eastern Sahara, close to the southern border of modern Egypt. The original features of this structure, including thousands of fragments of the meteorite impactor, are extremely well preserved. With the exception of a single 83 kg regmaglypted individual, all specimens of Gebel Kamil (the iron meteorite that formed the Kamil crater) are explosion fragments weighing from <1 g to 34 kg. Gebel Kamil is an ungrouped Ni‐rich (about 20 wt% Ni) ataxite characterized by high Ge and Ga contents (approximately 120 μg g?1 and approximately 50 μg g?1, respectively) and by a very fine‐grained duplex plessite metal matrix. Accessory mineral phases in Gebel Kamil are schreibersite, troilite, daubréelite, and native copper. Meteorite fragments are cross‐cut by curvilinear shear bands formed during the explosive terrestrial impact. A systematic search around the crater revealed that meteorite fragments have a highly asymmetric distribution, with greater concentrations in the southeast sector and a broad maximum in meteorite concentration in the 125–160° N sector at about 200 m from the crater rim. The total mass of shrapnel specimens >10 g, inferred from the density map compiled in this study is 3400 kg. Field data indicate that the iron bolide approached the Earth’s crust from the northwest (305–340° N), travelling along a moderately oblique trajectory. Upon hypervelocity impact, the projectile was disrupted into thousands of fragments. Shattering was accompanied by some melting of the projectile and of the quartz‐arenite target rocks, which also suffered shock metamorphism.  相似文献   

11.
Shock-induced recovery experiments were performed to investigate melt formation in porous sandstones in the low shock pressure regime between 2.5 and 17.5 GPa. The sandstone shocked at 2.5 and 5 GPa is characterized by pore closure, fracturing of quartz (Qtz), and compression and deformation of phyllosilicates; no melting was observed. At higher pressures, five different types of melts were generated around pores and alongside fractures in the sandstone. Melting of kaolinite (Kln), illite (Ill), and muscovite (Ms) starts at 7.5, 12, and 15 GPa, respectively. The larger the amount of water in these minerals (Kln ~14 wt%, Ill ~6–10 wt%, and Ms ~4 wt% H2O), the higher the shock compressibility and the lower the shock pressure required to induce melting. Vesicles in the almost dry silicate glasses attest to the loss of structural water during the short shock duration of the experiment. The compositions of the phyllosilicate-based glasses are identical to the composition of the parental minerals or their mixtures. Thus, this study has demonstrated that phyllosilicates in shocked sandstone undergo congruent melting during shock loading. In experiments at 10 GPa and higher, iron melt from the driver plate was injected into the phyllosilicate melts. During this process, Fe is partitioned from the metal droplets into the surrounding silicate melts, which induced unmixing of silicate melts with different chemical properties (liquid immiscibility). At pressures between 7.5 and 15 GPa, a pure SiO2 glass was formed, which is located as short and thin bands within Qtz grains. These bands were shown to contain tiny crystals of experimentally generated stishovite.  相似文献   

12.
We have investigated the carbonates in the impact melts and in a monolithic clast of highly shocked Coconino sandstone of Meteor Crater, AZ to evaluate whether melting or devolatilization is the dominant response of carbonates during high‐speed meteorite impact. Both melt‐ and clast‐carbonates are calcites that have identical crystal habits and that contain anomalously high SiO2 and Al2O3. Also, both calcite occurrences lack any meteoritic contamination, such as Fe or Ni, which is otherwise abundantly observed in all other impact melts and their crystallization products at Meteor Crater. The carbon and oxygen isotope systematics for both calcite deposits suggest a low temperature environment (<100 °C) for their precipitation from an aqueous solution, consistent with caliche. We furthermore subjected bulk melt beads to thermogravimetric analysis and monitored the evolving volatiles with a quadrupole mass spectrometer. CO2 yields were <5 wt%, with typical values in the 2 wt% range; also total CO2 loss is positively correlated with H2O loss, an indication that most of these volatiles derive from the secondary calcite. Also, transparent glasses, considered the most pristine impact melts, yield 100 wt% element totals by EMPA, suggesting complete loss of CO2. The target dolomite decomposed into MgO, CaO, and CO2; the CO2 escaped and the CaO and MgO combined with SiO2 from coexisting quartz and FeO from the impactor to produce the dominant impact melt at Meteor Crater. Although confined to Meteor Crater, these findings are in stark contrast to Osinski et al. (2008) who proposed that melting of carbonates, rather than devolatilization, is the dominant process during hypervelocity impact into carbonate‐bearing targets, including Meteor Crater.  相似文献   

13.
Abstract— Experimental solid metal‐liquid metal partition coefficients have been used to model the crystallization of magmatic iron meteorites and understand the evolution of asteroid cores. However, the majority of the partitioning experiments have been conducted with trace elements doped at levels that are orders of magnitude higher than measured in iron meteorites. Concern about Henry's Law and the unnatural doping levels have been cited as one reason that two recent iron meteorite studies have dismissed the experimental partition coefficients in their modeling. Using laser ablation ICP‐MS analysis, this study reports experimentally determined solid metal‐liquid metal trace element partition coefficients from runs doped down to the levels occurring in iron meteorites. The analyses for 12 trace elements (As, Co, Cr, Cu, Ga, Ge, Ir, Os, Pd, Pt, Re, and W) show no deviations from Henry's Law, and these results support decades of experimental work in which the partition coefficients were assumed to be independent of trace element concentration. Further, since our experiments are doped with natural levels of trace elements, the partitioning results are directly applicable to iron meteorites and should be used when modeling their crystallization. In contrast, our new Ag data are inconsistent with previous studies, suggesting the high Ag‐content in previous studies may have influenced the measured Ag partitioning behavior.  相似文献   

14.
In analyzing a thin section of the NWA 6604 CK4 meteorite, only altered chondrules and various components that are probably left behind the destruction of former chondrules can be observed. We suggest that melting, grain size decrease, resorption of the original chondrules, and crystallization of opaque minerals were the main processes that destroyed the chondrules. Four different events could be identified as having occurred during this alteration. First, opaques crystallized along former fractures producing chains of separated grains. Later, opaques and Ca‐rich minerals crystallized together in veins and large melt pockets; this was the strongest recrystallization phase involving the largest volume of melt. This occurred along different fractures than the first phase above. During the third phase, only Ca‐rich plagioclase crystallized along thin veins, and in a fourth phase, fractures formed again, partly along those formed during the second phases but without substantial mineral infill. Two simple possible case models should be considered for this meteorite: alteration by purely impact‐driven processes or mainly by melt‐driven processes. Although for CK4 chondrites, the shock‐produced alteration driven by impact is the more accepted and widespread approach, melting is also compatible with the observed textural characteristics of chondrule destruction. During melting, recrystallization took place producing iron‐rich minerals earlier and Ca‐Si‐rich ones later. The penetration of melts into veins contributed in the chondrule destruction. The stress directions also changed during these alterations, and minerals that formed later filled differently oriented fractures than the earlier ones. From our observations, we favor a view where heat‐driven melting and recrystallization produced the destruction and uniform mineralogy in the sample.  相似文献   

15.
Abstract– The MEMIN research unit (Multidisciplinary Experimental and Modeling Impact research Network) is focused on analyzing experimental impact craters and experimental cratering processes in geological materials. MEMIN is interested in understanding how porosity and pore space saturation influence the cratering process. Here, we present results of a series of impact experiments into porous wet and dry sandstone targets. Steel, iron meteorite, and aluminum projectiles ranging in size from 2.5 to 12 mm were accelerated to velocities of 2.5–7.8 km s?1, yielding craters with diameters between 3.9 and 40 cm. Results show that the target’s porosity reduces crater volumes and cratering efficiency relative to nonporous rocks. Saturation of pore space with water to 50% and 90% increasingly counteracts the effects of porosity, leading to larger but flatter craters. Spallation becomes more dominant in larger‐scale experiments and leads to an increase in cratering efficiency with increasing projectile size for constant impact velocities. The volume of spalled material is estimated using parabolic fits to the crater morphology, yielding approximations of the transient crater volume. For impacts at the same velocity these transient craters show a constant cratering efficiency that is not affected by projectile size.  相似文献   

16.
We combined high‐resolution and space‐resolved elemental distribution with investigations of magnetic minerals across Fe,Ni‐alloy and troilite interfaces for two nonmagmatic (Morasko and Mundrabilla) IAB group iron meteorites and an octahedrite found in 1993 in Coahuila/Mexico (Coahuila II) preliminarily classified on Ir and Au content as IIAB group. The aim of this study was to elucidate the crystallization and thermal history using gradients of the siderophile elements Ni, Co, Ge, and Ga and the chalcophile elements Cr, Cu, and Se with a focus on magnetic minerals. The Morasko and Coahuila II meteorite show a several mm‐thick carbon‐ and phosphorous‐rich transition zone between Fe,Ni‐alloy and troilite, which is characterized by magnetic cohenite and nonmagnetic or magnetic schreibersite. At Morasko, these phases have a characteristic trace element composition with Mo enriched in cohenite. In both Morasko and Coahuila II, Ni is enriched in schreibersite. The minerals have crystallized from immiscible melts, either by fractional crystallization and C‐ and P‐enrichment in the melt, or by partial melting at temperatures slightly above the eutectic point. During crystallization of Mundrabilla, the field of immiscibility was not reached. Independent of meteorite group and cooling history, the magnetic mineralogy (daubreelite, cohenite and/or schreibersite, magnetite) is very similar to the troilite (and transition zone) for all three investigated iron meteorites. If these minerals can be separated from the metal, they might provide important information about the early solar system magnetic field. Magnetite is interpreted as a partial melting or a terrestrial weathering product of the Fe,Ni‐alloy under oxidizing conditions.  相似文献   

17.
Cover     
Cover: Top left: Numerical model of an impact into a sandstone target. The simulation is an iSALE model that uses a material model developed and validated in MEMIN for wet and dry porous sandstones. In this simulation, 25% water saturation of the pore space is modeled. Top right: Plan view of an 18 cm diameter impact crater formed in sandstone by a 1 cm steel projectile at 3.4 km/s. (Experiment 3232) Bottom left: A high speed image of an impact of a 1.2 cm iron meteorite at 4.6 km/s into a 50% water‐saturated sandstone target (Experiment E3‐3384). The image (3.36 microseconds after impact) shows a well‐developed ejecta cone that has transitioned into the “ejecta tube,” a phenomenon that may be connected to pressure wave refl ections in the target. (High speed video courtesy of Fraunhofer EMI.) Bottom right: The experimental setup of a cratering experiment at Fraunhofer EMI’s “Space” light gas gun. The photo shows the target chamber after experiment A11‐5181. The back of a 20 cm sandstone cube that was saturated with water to 90% is visible. Three different types of ultrasound and pressure sensors are attached to the target’s surfaces that measured the pressure wave of the impact. In the background, an “ejecta catcher”, composed of Vaseline‐coated tiles and phenolic foam blocks, shows an imprint of the ejecta cone. (Photograph courtesy of Fraunhofer EMI.)  相似文献   

18.
Abstract– Despite the fact that Si is considered a potentially important metalloid in planetary systems, little is known about the effect of Si in metallic melts on trace element partitioning behavior. Previous studies have established the effects of S, C, and P, nonmetals, through solid metal/liquid metal experiments in the corresponding Fe binary systems, but the Fe‐Si system is not appropriate for similar experiments because of the high solubility of Si in solid metal. In this work, we present the results from 0.1 MPa experiments with two coexisting immiscible metallic liquids in the Fe‐S‐Si system. By leveraging the extensive available knowledge about the effect of S on trace element partitioning behavior, we explore the effect of Si. Results for 22 trace elements are presented. Strong Si avoidance behavior is demonstrated by As, Au, Ga, Ge, Sb, Sn, and Zn. Iridium, Os, Pt, Re, Ru, and W exhibit weak Si avoidance tendencies. Silicon appears to have no significant effect on the partitioning behaviors of Ag, Co, Cu, Cr, Ni, Pd, and V, all of which had similar partition coefficients over a wide range of Si liquid concentrations from Si‐free to 13 wt%. The only elements in our experiments to show evidence of a potentially weak attraction to Si were Mo and Rh. Applications of the newly determined effects of Si to problems in planetary science indicate that (1) The elements Ni, Co, Mo, and W, which are commonly used in planetary differentiation models, are minimally affected by the presence of Si in the metal, especially in comparison to other effects such as from oxygen fugacity. 2) Reduced enstatite‐rich meteorites may record a chemical signature due to Si in the metallic melts during partial melting, and if so, elements identified by this study as having strong Si avoidance may offer unique insight into unraveling the history of these meteorites.  相似文献   

19.
Abstract— Keil and Wilson (1993) proposed that, during partial melting of some asteroidal meteorite parent bodies, explosive pyroclastic volcanism accelerated S-rich Fe, Ni-FeS cotectic partial melts into space. These authors argued that this process was responsible for the S-depletion of many of the magmas from which the magmatic iron meteorites formed. This process only requires the presence of a few hundred to thousand ppm of volatiles in asteroids < ～100 km in radius. If the precursor materials of these magmatic iron meteorite groups were similar in composition to unequilibrated ordinary chondrites, then the volatile contents of the latter may be a measure of the potential effectiveness of the process. Analysis of volatile contents of seven unequilibrated ordinary chondrite falls by dynamic high-temperature mass spectrometry revealed that thousands of ppm of indigeneous volatiles, mostly CO, Cl, Na and S, are released at temperatures near the Fe, Ni-FeS cotectic melting temperature of ～980 °C. If these volatiles are largely retained in the asteroidal parent bodies until onset of partial melting, S depletion of the residual melt might have been achieved by ejection of S-rich partial Fe, Ni-FeS melts by pyroclastic volcanism.  相似文献   

20.
  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号