首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 792 毫秒
1.
Interaction between basaltic melts and peridotites has played an important role in modifying the lithospheric and asthenospheric mantle during magma genesis in a number of tectonic settings. Compositions of basaltic melts vary considerably and may play an important role in controlling the kinetics of melt–peridotite interaction. To better understand the effect of melt composition on melt–peridotite interaction, we conducted spinel lherzolite dissolution experiments at 2 GPa and 1,425 °C using the dissolution couple method. The reacting melts include a basaltic andesite, a ferro-basalt, and an alkali basalt. Dissolution of lherzolite in the basaltic andesite and the ferro-basalt produced harzburgite–lherzolite sequences with a thin orthopyroxenite layer at the melt–harzburgite interface, whereas dissolution of lherzolite in the alkali basalt produced a dunite–harzburgite–lherzolite sequence. Systematic variations in mineral compositions across the lithological units are observed. These mineral compositional variations are attributed to grain-scale processes that involve dissolution, precipitation, and reprecipitation and depend strongly on reacting melt composition. Comparison of mineral compositional variations across the dissolution couples with those observed in mantle xenoliths from the North China Craton (NCC) helps to assess the spatial and temporal variations in the extent of siliceous melt and peridotite interaction in modifying the lithospheric mantle beneath the NCC. We found that such melt–rock interaction mainly took place in Early Cretaceous, and is responsible for the enrichment of pyroxene in the lithospheric mantle. Spatially, siliceous melt–peridotite interaction took place in the ancient orogens with thickened lower crust.  相似文献   

2.
Melt-rock reaction in the upper mantle is recorded in a variety of ultramafic rocks and is an important process in modifying melt composition on its way from the source region towards the surface. This experimental study evaluates the compositional variability of tholeiitic basalts upon reaction with depleted peridotite at uppermost-mantle conditions. Infiltration-reaction processes are simulated by employing a three-layered set-up: primitive basaltic powder (‘melt layer’) is overlain by a ‘peridotite layer’ and a layer of vitreous carbon spheres (‘melt trap’). Melt from the melt layer is forced to move through the peridotite layer into the melt trap. Experiments were conducted at 0.65 and 0.8 GPa in the temperature range 1,170–1,290°C. In this P-T range, representing conditions encountered in the transition zone (thermal boundary layer) between the asthenosphere and the lithosphere underneath oceanic spreading centres, the melt is subjected to fractionation, and the peridotite is partially melting (T s ~ 1,260°C). The effect of reaction between melt and peridotite on the melt composition was investigated across each experimental charge. Quenched melts in the peridotite layers display larger compositional variations than melt layer glasses. A difference between glasses in the melt and peridotite layer becomes more important at decreasing temperature through a combination of enrichment in incompatible elements in the melt layer and less efficient diffusive equilibration in the melt phase. At 1,290°C, preferential dissolution of pyroxenes enriches the melt in silica and dilutes it in incompatible elements. Moreover, liquids become increasingly enriched in Cr2O3 at higher temperatures due to the dissolution of spinel. Silica contents of liquids decrease at 1,260°C, whereas incompatible elements start to concentrate in the melt due to increasing levels of crystallization. At the lowest temperatures investigated, increasing alkali contents cause silica to increase as a consequence of reactive fractionation. Pervasive percolation of tholeiitic basalt through an upper-mantle thermal boundary layer can thus impose a high-Si ‘low-pressure’ signature on MORB. This could explain opx + plag enrichment in shallow plagioclase peridotites and prolonged formation of olivine gabbros.  相似文献   

3.
The kinetics of lherzolite dissolution in an alkali basalt and a basaltic andesite was examined experimentally at 1,300°C and 1 GPa using the dissolution couple method. Dissolution of lherzolite in basaltic liquids produces either the melt-bearing dunite–harzburgite–lherzolite (DHL) sequence or the melt-bearing harzburgite–lherzolite sequence depending on whether the reacting melt is or close to olivine saturation (alkali basalt) or olivine + orthopyroxene saturation (basaltic andesite). The dunite in the DHL sequence is pyroxene-free and the harzburgites in both sequences are clinopyroxene-free. The melt fraction and olivine grain size in the dunite are larger than those in the harzburgite. The olivine grain size in the dunite and harzburgite in the DHL sequence also increases as a function experimental run time. Across the sharp dunite–harzburgite and harzburgite–lherzolite interfaces, systematic compositional variations are observed in the reacting melt, interstitial melt, olivine, and to a lesser extent, pyroxenes as functions of distance and time. The systematic variations in lithology, grain size, mineral chemistry, and melt compositions are broadly similar to those observed in the mantle sections of ophiolites. The processes of lherzolite dissolution in basaltic liquids involve dissolution, precipitation, reprecipitation, and diffusive transport in the interstitial melts and surrounding minerals. Preferential dissolution of olivine and clinopyroxene and precipitation of orthopyroxene in the basaltic andesite produces the melt-bearing harzburgite–lherzolite sequence. Preferential dissolution of clinopyroxene and orthopyroxene and precipitation of olivine results in the melt-bearing DHL sequence. Preferential mineral dissolution can also affect the composition of the through-going melt in a dunite channel or harzburgite matrix. Systematic variations in melt fraction and mineral grain size in the peridotite sequences are likely to play an important role in the development of channelized or diffuse porous melt flow in the mantle.An erratum to this article can be found at  相似文献   

4.
We have conducted high-pressure experiments on a natural oceanic gabbro composition (Gb108). Our aim was to test recent proposals that Sr-enrichment in rare primitive melt inclusions from Mauna Loa, Hawaii, may have resulted from melting of garnet pyroxenite formed in the magma source regions by reaction of peridotite with siliceous, Sr-enriched partial melts of eclogite of gabbroic composition. Gb108 is a natural, Sr-enriched olivine gabbro, which has a strong positive Sr anomaly superimposed on an overall depleted incompatible trace element pattern, reflecting its origin as a plagioclase-rich cumulate. At high pressures it crystallises as a coesite eclogite assemblage, with the solidus between 1,300 and 1,350°C at 3.5 GPa and 1,450 and 1,500°C at 4.5 GPa. Clinopyroxenes contain 4–9% Ca-eskolaite component, which varies systematically with pressure and temperature. Garnets are almandine and grossular-rich. Low degree partial melts are highly siliceous in composition, resembling dacites. Coesite is eliminated between 50 and 100°C above the solidus. The whole-rock Sr-enrichment is primarily hosted by clinopyroxene. This phase dominates the mode (>75 wt%) at all investigated PT conditions, and is the major contributor to partial melts of this eclogite composition. Hence the partial melts have trace element patterns sub-parallel to those of clinopyroxene with ≈10× greater overall abundances and with strong positive Sr anomalies. Recent studies of primitive Hawaiian volcanics have suggested the incorporation into their source regions of eclogite, formerly gabbroic material recycled through the mantle at subduction zones. The models suggest that formerly gabbroic material, present as eclogite in the Hawaiian plume, partially melted earlier than surrounding peridotite (i.e. at higher pressure) because of the lower solidus temperature of eclogite compared with peridotite. This produced highly siliceous melts which reacted with surrounding peridotite producing hybrid pyroxene + garnet lithologies. The Sr-enriched nature of the formerly plagioclase-rich gabbro was present in the siliceous partial melts, as demonstrated by these experiments, and was transferred to the reactive pyroxenite. These in turn partially melted, producing Sr-enriched picritic liquids which mixed with normal picritic partial melts of peridotite before eruption. On rare occasions these mixed, relatively Sr-rich melts were trapped as melt inclusions in primitive olivine phenocrysts. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

5.
The influence of water on melting of mantle peridotite   总被引：47，自引：8，他引：39  
This experimental study examines the effects of variable concentrations of dissolved H2O on the compositions of silicate melts and their coexisting mineral assemblage of olivine + orthopyroxene ± clinopyroxene ± spinel ± garnet. Experiments were performed at pressures of 1.2 to 2.0 GPa and temperatures of 1100 to 1345 °C, with up to ∼12 wt% H2O dissolved in the liquid. The effects of increasing the concentration of dissolved H2O on the major element compositions of melts in equilibrium with a spinel lherzolite mineral assemblage are to decrease the concentrations of SiO2, FeO, MgO, and CaO. The concentration of Al2O3 is unaffected. The lower SiO2 contents of the hydrous melts result from an increase in the activity coefficient for SiO2 with increasing dissolved H2O. The lower concentrations of FeO and MgO result from the lower temperatures at which H2O-bearing melts coexist with mantle minerals as compared to anhydrous melts. These compositional changes produce an elevated SiO2/(MgO + FeO) ratio in hydrous peridotite partial melts, making them relatively SiO2 rich when compared to anhydrous melts on a volatile-free basis. Hydrous peridotite melting reactions are affected primarily by the lowered mantle solidus. Temperature-induced compositional variations in coexisting pyroxenes lower the proportion of clinopyroxene entering the melt relative to orthopyroxene. Isobaric batch melting calculations indicate that fluid-undersaturated peridotite melting is characterized by significantly lower melt productivity than anhydrous peridotite melting, and that the peridotite melting process in subduction zones is strongly influenced by the composition of the H2O-rich component introduced into the mantle wedge from the subducted slab. Received: 7 April 1997 / Accepted: 9 January 1998  相似文献   

6.
Systematic variations in mineralogy and chemical composition across dunite-harzburgite (DH) and dunite-harzburgite-lherzolite (DHL) sequences in the mantle sections of ophiolites have been widely observed. The compositional variations are due to melt-rock reactions as basaltic melts travel through mantle peridotite, and may be key attributes to understanding melting and melt transport processes in the mantle. In order to better understand melt-rock reactions in the mantle, we conducted laboratory dissolution experiments by juxtaposing a spinel lherzolite against an alkali basalt or a mid-ocean ridge basalt. The charges were run at 1 GPa and either 1,300°C or 1,320°C for 8–28 h. Afterward, the charges were slowly cooled to 1,200°C and 1 GPa, which was maintained for at least 24 h to promote in situ crystallization of interstitial melts. Cooling allowed for better characterization of the mineralogy and mineral compositional trends produced and observed from melt-rock reactions. Dissolution of lherzolite in basaltic melts with cooling results in a clinopyroxene-bearing DHL sequence, in contrast to sequences observed in previously reported isothermal-isobaric dissolution experiments, but similar to those observed in the mantle sections of ophiolites. Compositional variations in minerals in the experimental charges follow similar melt-rock trends suggested by the field observations, including traverses across DH and DHL sequences from mantle sections of ophiolites as well as clinopyroxene and olivine from clinopyroxenite, dunite, and wehrlite dikes and xenoliths. These chemical variations are controlled by the composition of reacting melt, mineralogy and composition of host peridotite, and grain-scale processes that occur at various stages of melt-peridotite reaction. We suggest that laboratory dissolution experiments are a robust model to natural melt-rock reaction processes and that clinopyroxene in replacive dunites in the mantle sections of ophiolites is genetically linked to clinopyroxene in cumulate dunite and pyroxenites through melt transport and melt-rock reaction processes in the mantle.  相似文献   

7.
The Red Hills peridotite in the Dun Mountain ophiolite of SouthIsland, New Zealand, is assumed to have been produced in a paleo-mid-oceanridge tectonic setting. The peridotite is composed mostly ofharzburgite and dunite, which represent residual mantle andthe Moho transition zone (MTZ), respectively. Dunite channelswithin harzburgite blocks of various scales represent the MTZcomponent. Plagioclase- and clinopyroxene-bearing dunites occursporadically within common dunites. These dunites representproducts of melt–wall-rock interaction. Chondrite-normalizedrare earth element (REE) patterns of MTZ clinopyroxenes showa wide compositional range. Clinopyroxenes in plagioclase dunitesare extremely depleted in light REE (LREE) ([Lu/La]N >100),and are comparable with clinopyroxenes in abyssal peridotitesfrom normal mid-ocean ridges. Interstitial clinopyroxenes inthe common dunite have flatter patterns ([Lu/La]N 2) comparablewith those for dunite in the Oman ophiolite. Clinopyroxenesin the lower part of the residual mantle harzburgites are evenmore strongly depleted in LREE ([Lu/La]N = 100–1000) thanare mid-ocean ridge peridotites, and rival the most depletedabyssal clinopyroxenes reported from the Bouvet hotspot. Incontrast, those in the uppermost residual mantle harzburgiteand harzburgite blocks in the MTZ are less LREE depleted ([Lu/La]N= 10–100), and are similar to those in plagioclase dunite.Clinopyroxenes in the clinopyroxene dunite in the MTZ are similarto those reported from mid-ocean ridge basalt (MORB) cumulates,and clinopyroxenes in the gabbroic rocks have compositions similarto those reported from MORB. Strong LREE and middle REE (MREE)depletion in clinopyroxenes in the harzburgite suggests thatthe harzburgites are residues of two-stage fractional melting,which operated initially in the garnet field, and subsequentlycontinued in the spinel lherzolite field. The early stage meltingproduced the depleted harzburgite. The later stage melting wasresponsible for the gabbroic rocks and dunite. Strongly LREE–MREE-depletedclinopyroxene in the lower harzburgite and HREE-enriched clinopyroxenein the upper harzburgite and plagioclase dunite were formedby later reactive melt migration occurring in the harzburgite. KEY WORDS: clinopyroxene REE geochemistry; Dun Mountain ophiolite; Moho transition zone; orogenic peridotite; Red Hills  相似文献   

8.
The anhydrous melting behaviour of two synthetic peridotite compositions has been studied experimentally at temperatures ranging from near the solidus to about 200° C above the solidus within the pressure range 0–15 kb. The peridotite compositions studied are equivalent to Hawaiian pyrolite and a more depleted spinel lherzolite (Tinaquillo peridotite) and in both cases the experimental studies used peridotite –40% olivine compositions. Equilibrium melting results in progressive elimination of phases with increasing temperature. Four main melting fields are recognized; from the solidus these are: olivine (ol)+orthopyroxene (opx)+clinopyroxene (cpx)+Al-rich phase (plagioclase at low pressure, spinel at moderate pressure, garnet at high pressure)+liquid (L); ol+opx+cpx+Cr-spinel+L; ol+opx+Cr-spinel +L: ol±Cr-spinel+L. Microprobe analyses of the residual phases show progressive changes to more refractory compositions with increasing proportion of coexisting melt i.e. increasing Mg/(Mg+Fe) and Cr/(Cr+Al) ratios, decreasing Al2O3, CaO in pyroxene.The degree of melting, established by modal analysis, increases rapidly immediately above the solidus (up to 10% melting occurs within 25°–30° C of the solidus), and then increases in roughly linear form with increasing temperature.Equilibrium melt compositions have been calculated by mass balance using the compositions and proportions of residual phases to overcome the problems of iron loss and quench modification of the glass. Compositions from the melting of pyrolite within the spinel peridotite field (i.e. 15 kb) range from alkali olivine basalt (<15% melting) through olivine tholeiite (20–30% melting) and picrite to komatiite (40–60% melting). Melting in the plagioclase peridotite field produces magnesian quartz tholeiite and olivine-poor tholeiite and, at higher degrees of melting (30–40%), basaltic or pyroxenitic komatiite. Melts from Tinaquillo lherzolite are more silica saturated than those from pyrolite for similar degrees of partial melting, and range from olivine tholeiite through tholeiitic picrite to komatiite for melting in the spinel peridotite field.The equilibrium melts are compared with inferred primary magma compositions and integrated with previous melting studies on basalts. The data obtained here and complementary basalt melting studies do not support models of formation of oceanic crust in which the parental magmas of common mid-ocean ridge basalts (MORB) are attributed to segregation from source peridotite at shallow depths ( 25 km) to leave residual harzburgite. Liquids segregating from peridotite at these depths are more silica-rich than common MORB.  相似文献   

9.
西藏雅鲁藏布江缝合带东段泽当地幔橄榄岩特征及其意义   总被引：1，自引：1，他引：0  
泽当岩体位于雅鲁藏布江缝合带东段,主要由地幔橄榄岩、辉长辉绿岩和基性火山岩等组成。地幔橄榄岩主要为方辉橄榄岩和二辉橄榄岩,有少量透镜状纯橄岩。地幔橄榄岩经历了强烈的塑性变形作用。地幔橄榄岩中橄榄石的Fo值为89.6~91.8,属镁橄榄石;斜方辉石为顽火辉石,En 87.8~90.3;单斜辉石En 44.1~50.0,主要为顽透辉石和透辉石。铬尖晶石的Cr#值(=100×Cr/(Cr+Al))为17.0~93.6,其中,二辉橄榄岩和方辉橄榄岩中的铬尖晶石为富铝型尖晶石,纯橄岩中的铬尖晶石Cr#最高,为富铬型尖晶石。地幔橄榄岩的部分熔融程度为17%~34%,表明泽当地幔橄榄岩可能经历了多阶段的过程。亏损的主量元素组成和低于原始地幔的稀土元素含量(0.15×10-6~0.61×10-6)指示泽当地幔橄榄岩为经历过部分熔融和熔体抽取的亏损残余地幔岩石。REE配分型式为中稀土亏损的"V"型或"U"型,原始地幔标准化元素比值(La/Sm)N为0.5~8.0,表明泽当地幔橄榄岩经历过交代作用。矿物化学与地球化学数据表明泽当地幔橄榄岩形成于MOR环境,后受到SSZ环境的改造。  相似文献   

10.
A suite of mantle peridotites sampled in the Kamchatsky Mys includes spinel lherzolite, clinopyroxene-bearing harzburgite, and harzburgite. Mineral chemistry of olivine, chromian spinel, and clinopyroxene show strongly correlated element patterns typical of peridotite formed by 8% to more than 22% partial melting. Clinopyroxene in the Kamchatka peridotites is compositionally different from that of both abyssal and suprasubduction varieties: Clinopyroxene in lherzolite is depleted in LREE relative to abyssal peridotite and that in harzburgite has very low LREE and Sr unlike the subduction-related counterpart. These composition features indicate that the rocks ultra-depleted in basaltic components originated in the vicinity of a hotspot, possibly, proto-Hawaiian plume, which provided high temperature and melting degree of the MORB source mantle at mid-ocean ridge.  相似文献   

11.
The melting reaction at the solidus of mantle peridotite is commonly peritectic in nature, with liquid and one or more solid phases produced upon melting. In some situations, one of the phases participating on the reactant side of the reaction is present in low abundance. This article explores the possible effects of the low abundance of a reactant phase on the melting behavior of mantle peridotite.For example, spinel lherzolite begins to melt via the peritectic reaction, clinopyroxene + orthopyroxene + spinel = olivine + liquid in the ∼1- to 2-GPa pressure range. In natural spinel lherzolites, spinel is a modally minor mineral and may be infrequently in contact with both clinopyroxene and orthopyroxene. If these mutual contacts are insufficient to generate an interconnected melt, then significant melting may not occur until a combination of minerals that are modally abundant and in contact begin to melt. This scenario could have implications for the physical process of melting and for the timing of formation of an interconnected melt network and separation of the melt from the residue.To begin to investigate this possibility, the spatial relationships between the constituent minerals in two fertile spinel lherzolites were determined by elemental mapping with the electron microprobe. Olivine, orthopyroxene, and clinopyroxene are of similar size, whereas the spinel was smaller and interstitial. Spinel and clinopyroxene are frequently in contact, but mutual contacts of spinel, clinopyroxene, and orthopyroxene are rare. Because of the changes in modal mineralogy anticipated for these lherzolites with increasing temperature, these mutual contacts will be even less common at the solidus. Therefore, an interconnected, potentially extractable, melt may not occur by the solidus spinel + orthopyroxene + clinopyroxene melting reaction.  相似文献   

12.
The beginnings of hydrous mantle wedge melting   总被引：5，自引：3，他引：2  
This study presents new phase equilibrium data on primitive mantle peridotite (0.33 wt% Na2O, 0.03 wt% K2O) in the presence of excess H2O (14.5 wt% H2O) from 740 to 1,200°C at 3.2–6 GPa. Based on textural and chemical evidence, we find that the H2O-saturated peridotite solidus remains isothermal between 800 and 820°C at 3–6 GPa. We identify both quenched solute from the H2O-rich fluid phase and quenched silicate melt in supersolidus experiments. Chlorite is stable on and above the H2O-saturated solidus from 2 to 3.6 GPa, and chlorite peridotite melting experiments (containing ~6 wt% chlorite) show that melting occurs at the chlorite-out boundary over this pressure range, which is within 20°C of the H2O-saturated melting curve. Chlorite can therefore provide sufficient H2O upon breakdown to trigger dehydration melting in the mantle wedge or perpetuate ongoing H2O-saturated melting. Constraints from recent geodynamic models of hot subduction zones like Cascadia suggest that significantly more H2O is fluxed from the subducting slab near 100 km depth than can be bound in a layer of chloritized peridotite ~ 1 km thick at the base of the mantle wedge. Therefore, the dehydration of serpentinized mantle in the subducted lithosphere supplies free H2O to trigger melting at the H2O-saturated solidus in the lowermost mantle wedge. Alternatively, in cool subduction zones like the Northern Marianas, a layer of chloritized peridotite up to 1.5 km thick could contain all the H2O fluxed from the slab every million years near 100 km depth, which suggests that the dominant form of melting below arcs in cool subduction zones is chlorite dehydration melting. Slab P–T paths from recent geodynamic models also allow for melts of subducted sediment, oceanic crust, and/or sediment diapirs to interact with hydrous mantle melts within the mantle wedge at intermediate to hot subduction zones.  相似文献   

13.
In this paper we present new data on the spatial variability of peridotite composition across a kilometer-scale mantle shear zone within the Lanzo massif (Western Alps, Italy). The shear zone separates the central from the northern part of the massif. Plagioclase peridotite shows gradually increasing deformation towards the shear zone, from porphyroclastic to mylonitic textures in the central body, while the northern body is composed of porphyroclastic rocks. The peridotite displays a large range of compositions, from fertile peridotite to refractory harzburgite and dunite. Deformed peridotites (proto-mylonite and mylonites) tend to be compositionally more homogeneous and fertile than weakly deformed peridotites. The composition of most plagioclase peridotites show rather high and constant (Ce/Yb) N ratios, and Yb N that cannot be explained by any simple melting model. Instead, refertilization modeling, consisting of melt increments from spinel peridotite sources, particularly with E-MORB melt, reasonably reproduces the plagioclase peridotite whole rock composition. Combined with constraints from Ce–Nb and Ce–Th systematics, we speculate that peridotites such as those from Lanzo record pervasive refertilization processes in the thermal boundary layer. In this scenario, mantle shear zones might act as important areas of melt focusing in the upper mantle that separates the thermal boundary layer from the conductively cooled mantle.  相似文献   

14.
Garnet-bearing and garnet-free pyroxenite xenoliths from Quaternary basanites of Marsabit, northern Kenya, were analysed for microstructures and mineral compositions (major and trace elements) to constrain the thermal and compositional evolution of the lithospheric mantle in this region. Garnet-bearing rocks are amphibole-bearing websterite with ~5–10 vol% orthopyroxene. Clinopyroxene is LREE-depleted and garnet has high HREE contents, in agreement with an origin as cumulates from basaltic mantle melts. Primary orthopyroxene inclusions in garnet suggest that the parental melts were orthopyroxene-saturated. Rock fabrics vary from weakly to strongly deformed. Thermobarometry indicates extensive decompression and cooling (~970–1,100°C at ~2.3–2.6 GPa to ~700–800°C at ~0.5–1.0 GPa) during deformation, best interpreted as pyroxenite intrusion into thick Paleozoic continental lithosphere subsequently followed by continental rifting (i.e., formation of the Mesozoic Anza Graben). During continental rifting, garnet websterites were decompressed (garnet-to-spinel transition) and experienced the same P–T evolution as their host peridotites. Strongly deformed samples show compositional overlaps with cpx-rich, initially garnet-bearing lherzolite, best explained by partial re-equilibration of peridotite and pyroxenite during deformation and mechanical mingling. In contrast, garnet-free pyroxenites include undeformed, cumulate-like samples, indicating that they are younger than the garnet websterites. Major and trace element compositions of clinopyroxene and calculated equilibrium melts suggest crystallisation from alkaline basaltic melt similar to the host basanite, which suggests formation in the context of alkaline magmatism during the development of the Kenya rift. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

15.
The fidelity of melt inclusions as records of melt composition   总被引：5，自引：5，他引：0  
A series of experiments created melt inclusions in plagioclase and pyroxene crystals grown from a basaltic melt at 1,150°C, 1.0 GPa to investigate diffusive fractionation during melt inclusion formation; additionally, P diffusion in a basaltic melt was measured at 1.0 GPa. Melt inclusions and melts within a few 100 microns of plagioclase–melt interfaces were analyzed for comparison with melt compositions far from the crystals. Melt inclusions and melt compositions in the boundary layer close to the crystal–melt interface were similar, but both differ significantly in incompatible element concentrations from melt found greater than approximately 200 microns away from the crystals. The compositional profiles of S, Cl, P, Fe, and Al in the boundary layers were successfully reproduced by a two-step model of rapid crystal growth followed by diffusive relaxation toward equilibrium after termination of crystal growth. Applying this model to investigate possible incompatible element enrichment in natural melt inclusions demonstrated that at growth rates high enough to create the conditions for melt inclusion formation, ∼10−9–10−8 m s−1, the concentration of water in the boundary layer near the crystal was similar to that of the bulk melt because of its high diffusion coefficient, but sulfur, with a diffusivity similar to major elements and CO2, was somewhat enriched in the boundary layer melt, and phosphorus, with its low diffusion coefficient similar to other high-field strength elements and rare earth elements, was significantly enriched. Thus, the concentrations of sulfur and phosphorus in melt inclusions may over-estimate their values in the bulk melt, and other elements with similar diffusion coefficients may also be enriched in melt inclusions relative to the bulk melt. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

16.
Peridotite samples recovered from IODP Site U1309 at the Atlantis Massif in the Mid-Atlantic Ridge were examined to understand magmatic processes for the oceanic core complex formation. Original peridotite was fragmented, and the limited short peridotite intervals are now surrounded by a huge gabbro body probably formed by late-stage melt injections. Each peridotite interval has various petrographical and geochemical features. A spinel harzburgite in contact with gabbro shows evidence of limited melt penetrations causing gradual compositional change, in terms of trace-element compositions of pyroxenes, as well as modal change near the boundary. Geochemistry of clinopyroxenes with least melt effects indicates that the harzburgite is originally mantle residue formed by partial melting under polybaric conditions, and that such a depleted peridotite is one of the components of the oceanic core complex. Some of plagioclase-bearing peridotites, on the other hand, have more complicated origin. Although their original features were partly overprinted by the injected melt, the original peridotites, both residual and non-residual materials, were possibly derived from the upper mantle. This suggests that the melt injected around an upper mantle region or into mantle material fragments. The injected melt was possibly generated at the ridge-segment center and, then, moved and evolved toward the segment end beneath the oceanic core complex.  相似文献   

17.
In the North‐East Greenland Caledonides, P–T conditions and textures are consistent with partial melting of ultrahigh‐pressure (UHP) eclogite during exhumation. The eclogite contains a peak assemblage of garnet, omphacite, kyanite, coesite, rutile, and clinozoisite; in addition, phengite is inferred to have been present at peak conditions. An isochemical phase equilibrium diagram, along with garnet isopleths, constrains peak P–T conditions to be subsolidus at 3.4 GPa and 940°C. Zr‐in‐rutile thermometry on inclusions in garnet yields values of ~820°C at 3.4 GPa. In the eclogite, plagioclase may exhibit cuspate textures against surrounding omphacite and has low dihedral angles in plagioclase–clinopyroxene–garnet aggregates, features that are consistent with former melt–solid–solid boundaries and crystallized melt pockets. Graphic intergrowths of plagioclase and amphibole are present in the matrix. Small euhedral neoblasts of garnet against plagioclase are interpreted as formed from a peritectic reaction during partial melting. Polymineralic inclusions of albite+K‐feldspar and clinopyroxene+quartz±kyanite±plagioclase in large anhedral garnet display plagioclase cusps pointing into the host, which are interpreted as crystallized melt pockets. These textures, along with the mineral composition, suggest partial melting of the eclogite by reactions involving phengite and, to a large extent, an epidote‐group mineral. Calculated and experimentally determined phase relations from the literature reveal that partial melting occurred on the exhumation path, at pressures below the coesite to quartz transition. A calculated P–T phase diagram for a former melt‐bearing domain shows that the formation of the peritectic garnet rim occurred at 1.4 GPa and 900°C, with an assemblage of clinopyroxene, amphibole, and plagioclase equilibrated at 1.3 GPa and 720°C. Isochemical phase equilibrium modelling of a symplectite of clinopyroxene, plagioclase, and amphibole after omphacite, combined with the mineral composition, yields a P–T range at 1.0–1. 6 GPa, 680–1,000°C. The assemblage of amphibole and plagioclase is estimated to reach equilibrium at 717–732°C, calculated by amphibole–plagioclase thermometry for the former melt‐bearing domain and symplectite respectively. The results of this study demonstrate that partial melt formed in the UHP eclogite through breakdown of an epidote‐group mineral with minor involvement of phengite during exhumation from peak pressure; melt was subsequently crystallized on the cooling path.  相似文献   

18.
To investigate eclogite melting under mantle conditions, wehave performed a series of piston-cylinder experiments usinga homogeneous synthetic starting material (GA2) that is representativeof altered mid-ocean ridge basalt. Experiments were conductedat pressures of 3·0, 4·0 and 5·0 GPa andover a temperature range of 1200–1600°C. The subsolidusmineralogy of GA2 consists of garnet and clinopyroxene withminor quartz–coesite, rutile and feldspar. Solidus temperaturesare located at 1230°C at 3·0 GPa and 1300°C at5·0 GPa, giving a steep solidus slope of 30–40°C/GPa.Melting intervals are in excess of 200°C and increase withpressure up to 5·0 GPa. At 3·0 GPa feldspar, rutileand quartz are residual phases up to 40°C above the solidus,whereas at higher pressures feldspar and rutile are rapidlymelted out above the solidus. Garnet and clinopyroxene are theonly residual phases once melt fractions exceed 20% and garnetis the sole liquidus phase over the investigated pressure range.With increasing melt fraction garnet and clinopyroxene becomeprogressively more Mg-rich, whereas coexisting melts vary fromK-rich dacites at low degrees of melting to basaltic andesitesat high melt fractions. Increasing pressure tends to increasethe jadeite and Ca-eskolaite components in clinopyroxene andenhance the modal proportion of garnet at low melt fractions,which effects a marked reduction in the Al2O3 and Na2O contentof the melt with pressure. In contrast, the TiO2 and K2O contentsof the low-degree melts increase with increasing pressure; thusNa2O and K2O behave in a contrasted manner as a function ofpressure. Altered oceanic basalt is an important component ofcrust returned to the mantle via plate subduction, so GA2 maybe representative of one of many different mafic lithologiespresent in the upper mantle. During upwelling of heterogeneousmantle domains, these mafic rock-types may undergo extensivemelting at great depths, because of their low solidus temperaturescompared with mantle peridotite. Melt batches may be highlyvariable in composition depending on the composition and degreeof melting of the source, the depth of melting, and the degreeof magma mixing. Some of the eclogite-derived melts may alsoreact with and refertilize surrounding peridotite, which itselfmay partially melt with further upwelling. Such complex magma-genesisconditions may partly explain the wide spectrum of primitivemagma compositions found within oceanic basalt suites. KEY WORDS: eclogite; experimental petrology; mafic magmatism; mantle melting; oceanic basalts  相似文献   

19.
Low-Ca pyroxenes play an important role in mantle melting, melt-rock reaction, and magma differentiation processes. In order to better understand REE fractionation during adiabatic mantle melting and pyroxenite-derived melt and peridotite interaction, we developed a parameterized model for REE partitioning between low-Ca pyroxene and basaltic melts. Our parameterization is based on the lattice strain model and a compilation of published experimental data, supplemented by a new set of trace element partitioning experiments for low-Ca pyroxenes produced by pyroxenite-derived melt and peridotite interaction. To test the validity of the assumptions and simplifications used in the model development, we compared model-derived partition coefficients with measured partition coefficients for REE between orthopyroxene and clinopyroxene in well-equilibrated peridotite xenoliths. REE partition coefficients in low-Ca pyroxene correlate negatively with temperature and positively with both calcium content on the M2 site and aluminum content on the tetrahedral site of pyroxene. The strong competing effect between temperature and major element compositions of low-Ca pyroxene results in very small variations in REE partition coefficients in orthopyroxene during adiabatic mantle melting when diopside is in the residue. REE partition coefficients in orthopyroxene can be treated as constants at a given mantle potential temperature during decompression melting of lherzolite and diopside-bearing harzburgite. In the absence of diopside, partition coefficients of light REE in orthopyroxene vary significantly, and such variations should be taken into consideration in geochemical modeling of REE fractionation in clinopyroxene-free harzburgite. Application of the parameterized model to low-Ca pyroxenes produced by reaction between pyroxenite-derived melt and peridotite revealed large variations in the calculated REE partition coefficients in the low-Ca pyroxenes. Temperature and composition of starting pyroxenite must be considered when selecting REE partition coefficients for pyroxenite-derived melt and peridotite interaction.  相似文献   

20.
The Trinity peridotite (northern CA) contains numerous lithologic sequences consisting of dunite to harzburgite to spinel lherzolite to plagioclase lherzolite. Previous workers have documented geochemical gradients in these sequences consistent with melt-rock reaction processes occurring around dunites, interpreted to reflect conduits for melt ascent. We have undertaken a study of Li isotope compositions of clinopyroxene and some olivine within these sequences using ion probe techniques to test the hypothesis that the geochemical gradients are related to diffusive fluxing of alkali elements into or away from the melt conduit.Results show large variations in 7Li/6Li occurring in a consistent pattern across three transects from dunite to plagioclase lherzolite within the Trinity peridotite. Specifically, measurements of average δ7Li for single thin sections along the traverse reveal a low in δ7Li in the harzburgite adjacent to the dunite returning to higher values farther from the dunite with a typical offset of ∼10 per mil in the low δ7Li trough. This pattern is consistent with a process whereby Li isotopes are fractionated during diffusion through a melt either from the dunite conduit to the surrounding peridotite, or from the surrounding peridotite into the dunite conduit. The patterns in 7Li/6Li occur over a length scale similar to the decrease in REE concentration in these same samples. Explaining both the trace element and Li isotopic gradients requires a combined process of alkali diffusion and melt extraction.We develop a numerical model and examine several scenarios of the combined diffusion-extraction process. Using experimentally constrained values for the change in Li diffusion coefficient with isotope mass, large changes in δ7Li as a function of distance can be created in year to decade timescales. The addition of the melt extraction term allows larger Li concentration gradients to be developed and thus produces larger isotopic fractionations than diffusion only models. The extraction aspect of the model can also account for the observed decrease in rare earth element concentrations across the transects.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号