首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The main objective of this study is to investigate the chemical characteristics of biomass burning aerosol and its impact on regional air quality during an agricultural waste burning period in early summer in the rural areas of Korea. A 12-h integrated intensive sampling of biomass burning aerosol in the fine and coarse modes was conducted on 2–20 June 2003 in Gwangju, Korea. The collected samples were analyzed for concentrations of mass, ionic, elemental, and carbonaceous species. Average concentrations of fine and coarse mass were measured to be 67.9 and 18.7 μg m− 3 during the biomass burning period, 41.9 and 18.8 μg m− 3 during the haze period, and 35.6 and 13.3 μg m− 3 during the normal period, respectively. An exceptionally high PM2.5 concentration of 110.3 μg m− 3 with a PM2.5/PM10 ratio of 0.79 was observed on 6 June 2003 during the biomass burning period. The potassium ratio method was used to identify biomass burning samples. The average ratio of potassium in the fine mode to the coarse mode (FK/CK) was 23.8 during the biomass burning period, 6.0 during the haze period, and 4.7 during the normal period, respectively. A FK/CK ratio above 9.2 was considered a criterion for biomass burning event in this study. Particulate matter from the open field burning of agricultural waste has an adverse impact on visibility, human health, and regional air quality.  相似文献   

2.
Black carbon relationships with emissions and meteorology in Xi'an, China   总被引：4，自引：0，他引：4  
Aerosol black carbon (BC) was measured every 5 min at Xi'an, China from September 2003 to August 2005. Daily BC concentrations ranged from 2 to 65 μg m− 3, averaging 14.7 ± 9.5 μg m− 3 and displayed clear summer minima and winter maxima. BC typically peaked between 0800 and 1000 LST and again between 2000 and 2200 LST, corresponding with morning and evening traffic combined with nighttime residential cooking and heating. The nocturnal peak was especially evident in winter, when more domestic heating is used and pollutant-trapping surface-inversions form earlier than in summer. BC frequency distributions the most commonly occurring concentrations occurred between 5 and 10 μg m− 3 in all four seasons. BC ranged from 1.6% and 15.6%, and averaged 8.3% of PM2.5. A clear inverse relationship between BC and wind speed (WS) was found when WS was below 2.5 to 3.0 m s− 1, implying a local origin for BC. Mixed layer depths (MLDs) were shallower during BC episodes compared to cleaner conditions.  相似文献   

3.
Aerosol size distributions were measured with Micro Orifice Uniform Deposit Impactor (MOUDI) cascade impactors at the rural Angiola and urban Fresno Supersites in California's San Joaquin Valley during the California Regional PM10/PM2.5 Air Quality Study (CRPAQS) winter campaign from December 15, 2000 to February 3, 2001. PM2.5 filter samples were collected concurrently at both sites with Sequential Filter Samplers (SFS). MOUDI nitrate (NO3−) concentrations reached 66 μg/m3 on January 6, 2001 during the 1000–1600 PST (GMT-8) period. Pair-wise comparisons between PM2.5 MOUDI and SFS concentrations revealed high correlations at the Angiola site (r > 0.93) but more variability (r < 0.85) at the Fresno site for NO3−, sulfate (SO4=), and ammonium (NH4+). Correlations were higher at Fresno (r > 0.87) than at Angiola (r < 0.7) for organic carbon (OC), elemental carbon (EC), and total carbon (TC). NO3− and SO4= size distributions in Fresno were multi-modal and wider than the uni-modal distributions observed at Angiola. Geometric mean diameters (GMD) were smaller for OC and EC than for NO3− and SO4= at both sites. OC and EC were more concentrated on the lowest MOUDI stage (0.056 µm) at Angiola than at Fresno. The NO3− GMD increased from 0.97 to 1.02 µm as the NO3− concentration at Angiola increased from 43 to 66 µg m− 3 during a PM2.5 episode from January 4–7, 2001. There was a direct relationship between GMD and NO3− and SO4= concentrations at Angiola but no such relationships for OC or EC. This demonstrates that secondary aerosol formation increases both concentration and particle size for the rural California environment.  相似文献   

4.
Shanghai is the largest industrial and commercial city in China, and its air quality has been deteriorating for several decades. However, there are scarce researches on the level and seasonal variation of fine particle (PM2.5) as well as the carbonaceous fractions when compared with other cities in China and around the world. In the present paper, abundance and seasonal characteristics of PM2.5, organic carbon (OC) and elemental carbon (EC) were studied at urban and suburban sites in Shanghai during four season-representative months in 2005–2006 year. PM2.5 samples were collected with high-vol samplers and analyzed for OC and EC using thermal-optical transmittance (TOT) protocol. Results showed that the annual average PM2.5 concentrations were 90.3–95.5 μg/m3 at both sites, while OC and EC were 14.7–17.4 μg/m3 and 2.8–3.0 μg/m3, respectively, with the OC/EC ratios of 5.0–5.6. The carbonaceous levels ranked by the order of Beijing > Guangzhou > Shanghai > Hong Kong. The carbonaceous aerosol accounted for  30% of the PM2.5 mass. On seasonal average, the highest OC and EC levels occurred during fall, and they were higher than the values in summer by a factor of 2. Strong correlations (r = 0.79–0.93) between OC and EC were found in the four seasons. Average level of secondary organic carbon (SOC) was 5.7–7.2 μg/m3, accounting for  30% of the total OC. Strong seasonal variation was observed for SOC with the highest value during fall, which was about two times the annual average.  相似文献   

5.
Deposition of atmospheric particulate PCBs in suburban site of Turkey   总被引：2，自引：1，他引：2  
Dry deposition and air concentration samples were collected from July 2004 to May 2005 at a suburban site in Turkey. A water surface sampler (WSS) was used to measure directly the dry deposition flux of particulate polychlorinated biphenyls (PCBs) while a high volume air sampler (HVAS) was employed to collect air samples. Particulate PCB concentrations accounted for 15% of total PCBs (gas + particle phase) at the site. The overall particulate phase PCB flux ranged from 2 to 160 ng m− 2 d− 1 with an average of 46.3 ± 40.6 ng m− 2 d− 1. Forty one PCB congeners were targeted in the samples while twenty one congeners were found to be higher than detection limits in deposition samples. Fluxes for homolog groups ranged between 0.9 (7-CBs) and 21.0 (3-CBs) ng m− 2 d− 1. Measured dry deposition fluxes were lower than the ones usually reported for urban sites. Average PCB dry deposition velocity, calculated using flux values and concurrently measured atmospheric concentrations, was 1.26 ± 1.86 cm s− 1 depended on size distribution of particles, atmospheric PCB concentrations and meteorological conditions.  相似文献   

6.
Spokane, WA is prone to frequent particulate pollution episodes due to dust storms, biomass burning, and periods of stagnant meteorological conditions. Spokane is the location of a long-term study examining the association between health effects and chemical or physical constituents of particulate pollution. Positive matrix factorization (PMF) was used to deduce the sources of PM2.5 (particulate matter ≤2.5 μm in aerodynamic diameter) at a residential site in Spokane from 1995 through 1997. A total of 16 elements in 945 daily PM2.5 samples were measured. The PMF results indicated that seven sources independently contribute to the observed PM2.5 mass: vegetative burning (44%), sulfate aerosol (19%), motor vehicle (11%), nitrate aerosol (9%), airborne soil (9%), chlorine-rich source (6%) and metal processing (3%). Conditional probability functions were computed using surface wind data and the PMF deduced mass contributions from each source and were used to identify local point sources. Concurrently measured carbon monoxide and nitrogen oxides were correlated with the PM2.5 from both motor vehicles and vegetative burning.  相似文献   

7.
This paper presents the development of a simple and precise analytical method for the determination of nitrogen dioxide in ambient air. In this method nitrogen dioxide is determined in the form of nitrite. The determination of nitrogen dioxide needs no reagents except for a solution of sodium hydroxide mixed with sodium arsenite (NaOH–Na2As2O3) which is used as an absorbing reagent for trapping the nitrogen dioxide from the atmosphere in the form of nitrite, i.e., a prior analysis step. The determination of submicrogram levels of nitrogen dioxide is based on the selection of a strong and sharp quantitative analytical peak at 1380 cm− 1 using diffuse reflectance infrared spectroscopy (DRS-FTIR). The limit of detection (LOD) and the limit of quantification of the method are found to be 0.008 μg g− 1 NO2− and 0.05 μg g− 1 NO2−, respectively. The precision in terms of standard deviation and relative standard deviation value at a level of 2 μg NO2− / 0.1 g KBr for n = 10 is found to be 0.036 μg NO2− and 1.8%, respectively. The relative standard deviation (n = 10) for the determination of nitrogen dioxide in ambient air was observed to be in the range 2.6–3.8%. The method proposed is time-saving and eliminates the slow and cumbersome steps of pH maintenance of the reaction mixture and color formation of the EPA recommended spectrophotometric and other methods for quantitative determination of nitrogen dioxide.  相似文献   

8.

Pre and Post-Monsoon levels of ambient SO2, NO2, PM2.5 and the trace metals Fe, Cu, etc. were measured at industrial and residential regions of the Kochi urban area in South India for a period of two years. The mean PM2.5, SO2 and NO2 concentrations across all sites were 38.98?±?1.38 µg/m3, 2.78?±?0.85 µg/m3 and 11.90?±?4.68 µg/m3 respectively, which is lower than many other Indian cities. There was little difference in any on the measured species between the seasons. A few sites exceeded the NAAQS (define acronym and state standard) and most of the sites exceeded WHO (define acronym and state standard) standard for PM2.5. The average trace metal concentrations (ng/m3) were found to be Fe (32.58)?>?Zn (31.93)?>?Ni (10.13)?>?Cr (5.48)?>?Pb (5.37)?>?Cu (3.24). The maximum concentration of trace metals except Pb were reported in industrial areas. The enrichment factor, of metals relative to crustal material, indicated anthropogenic dominance over natural sources for the trace metal concentration in Kochi’s atmosphere. This work demonstrates the importance of air quality monitoring in this area.

  相似文献   

9.
Organic and elemental carbon (OC and EC) content in PM10 was studied at two sites in Prague, which were located in a suburb and in the downtown. Similar overall average levels were found for both species and also for the PM10 mass at the two sites (i.e., 5.5 and 4.8 μg/m3 for OC, 0.74 and 0.80 μg/m3 for EC, and 33 μg/m3 and 37 μg/m3 for the PM10 mass at the suburb and downtown site, respectively), but substantial differences were observed between the two sites in some seasons and/or meteorological situations. Approximately three times higher values were found for OC in winter compared to summer, with a higher winter/summer ratio for the suburban site. The differences for EC were smaller, but still, compared to summer, more than two times higher EC levels were observed during autumn at the suburban site and 1.5 higher EC levels in winter and autumn at the downtown site. The lowest OC to EC ratios at the suburban site were 3.4, while they were around 1.3 for the downtown site. It was found that the origin of the air masses had a major impact on the observed PM10 mass and OC levels, with largest concentrations noted for air masses recirculating over central Europe and arriving from southeastern Europe in winter. Trajectories coming from the west and northwest originating above the Atlantic Ocean and the Artic brought the cleanest air masses to the sites. For EC the largest difference between the two sites was observed for northwesterly winds during the non-heating season when the suburban site was upwind of Prague.  相似文献   

10.
In the present study, the wet and dry depositions of particulate NO3−, SO42−, Cl− and NH4+ were measured using a wet/dry sampler as a surrogate surface. Gas phase compounds of nitrogen, sulfur and chloride (HNO3, NH3, SO2 and HCl) were measured by an annular denuder system (ADS) equipped with a back up filter for the collection of particles with diameter ≤ 5 μm. Ambient concentrations of NO, NO2 and SO2 were also taken into consideration. Sampling was conducted at an urban site in the center of the city of Thessaloniki, northern Greece. The presence of the aerosol species was examined by cold/warm period and the possible compounds in dry deposits were also considered. Dry deposition fluxes were found to be well correlated with ambient particle concentrations in order to be used for the calculation of particle deposition velocity. Average particulate deposition velocities calculated were 0.36, 0.20, 0.20 and 0.10 cm s− 1 for Cl−, NO3−, SO42− and NH4+, respectively. Total dry deposition fluxes (gas and particles) were estimated at 3.24 kg ha− 1 year− 1 for chloride (HCl + p-Cl), 9.97 kg ha− 1 year− 1 for nitrogen oxidized (NO + NO2 + HNO3 + p-NO3), 5.32 kg ha− 1 year− 1 for nitrogen reduced (NH3 + p-NH4) and 15.77 kg ha− 1 year− 1 for sulfur (SO2 + p-SO4). 70–90% total dry deposition was due to gaseous species deposition. The contribution of dry deposition to the total (wet + dry) was at the level of 60–70% for sulfur and nitrogen (oxidized and reduced), whereas dry chloride deposition contributed 35% to the total. The dry-to-wet deposition ratio of all the studied species was found to be significantly associated with the precipitation amount, with nitrogen species being better and higher correlated. Wet, dry and total depositions measured in Thessaloniki, were compared with other countries of Europe, US and Asia.  相似文献   

11.
Cloudwater samples were collected from November 1992 to March 1995 in Vallombrosa, a mountain site of the Tuscan Apennines (central Italy). Chemical analyses show that all examined inorganic ions contributed significantly to the total ionic content (TIC). The ratio SO42−/NO4− ranged from 0.92 to 3.46 and was >1 for 86% of samples. There is a wide range in the chemical composition of the cloudwater. The total ionic content ranged from 640 to 7476 μeq l−1 and pH from 3.17 to 6.22. The liquid water content (LWC) ranged from 0.06 to 0.94 g m−3 and electrical conductivity from 47 to 485 μΩ−1. The total ionic content decreases while the liquid water content increases. Also analyzed were soluble trace metals (Fe, Pb, Cu, Mn, Cd, Al), synthetic anionic surfactants and the methanesulphonic acid. Chemical analyses evidenced in some cases a high concentration of organic matter. The meteorological analysis for a few samples of individual passages was carried out for the possibility of establishing a correspondence between meteorological events and chemical composition. The sources (marine, crustal and anthropogenic) of chemical components were deduced.  相似文献   

12.
The changing chemical composition of cloud water and precipitation in the Western Sudety Mountains are discussed against the background of air-pollution changes in the Black Triangle since the 1980s until September 2004. A marked reduction of sulphur dioxide emissions between the early 1990's and the present (from almost 2 million tons to around 0.2 million tons) has been observed, with a substantial decline of sulphate and hydrogen concentration in cloud water (SO42− from more than 200 to around 70 μmol l− 1; H+ from 150 to 50 μmol l− 1) and precipitation (SO42− from around 80 to 20–30 μmol l− 1; H+ from around 60 to 10–15 μmol l− 1) samples. At some sites, where fog/cloud becomes the major source of pollutants, deposition hot spots are still observed where, for example, nitrogen deposition can exceed 20 times the relevant critical load. The results show that monitoring of cloud water chemistry can be a sensitive indicator of pollutant emissions.  相似文献   

13.
This study describes the chemical composition of dry deposition collected at a highway traffic site in central Taiwan during daytime and nighttime periods by using a dry deposition plate (DDP) and water surface sampler (WSS). In addition, the characterization for mass and water-soluble species of total suspended particulate (TSP), both PM2.5 and PM10, was studied at the study site from August 22 to November 30, 2006. Dry deposition fluxes of ambient air particulates and inorganic species (Na+, NH4+, K+, Mg2+, Ca2+, Cl−, NO3− and SO42−) were analyzed by Ion Chromatography (DIONEX-100).Results of the particulate dry deposition fluxes and mass concentrations are higher in the water surface sampler with respect to the dry deposition plate used in this study. Statistical results also showed the average dry deposition flux of the ionic species (Na+, NH4+, K+, Cl−, NO3− and SO42−) obtained by the DDP and WSS displayed significant differences. Also, the average concentrations of Mg2+ and, Ca2+ were statistically the same at this study site.  相似文献   

14.
Summary Daily sampling of atmospheric PM10 particulate was carried out using a continuously weighing, Tapered Element Oscillating Microbalance (TEOM) equipped with a PM10 size selective inlet. The TEOM collects PM10 on a small filter interfaced with an inertial mass transducer, which allows near continuous weighing of the filter as the deposit accumulates. The sampler was sited at several urban and sub-urban places in Córdoba City, Argentina. With the complete data set of chemical and meteorological variables (CO, NOx, O3, wind speed, wind direction, ambient temperature, total and UV radiation, pressure and relative humidity, etc.) a stepwise regression was performed to select which variables have a major influence on the amount of PM10 measured. Results are presented from the June 1995–May 1996 field campaign. Data for PM10 values largely exceeded the one day standard average value of 150 g m–3 during several days. The largest amount of particulate has been measured during the winter season. The primary aim of this work is to define the concentration characteristics of ambient PM10 at each site where this pollutant has been measured and to examine the seasonal variation of PM10.With 3 Figures  相似文献   

15.
The solvent-extractable organic compounds of atmospheric PM10 samples, collected over two years beginning in 2003 at urban and suburban sites of Beijing, were characterized using gas chromatography–mass spectrometry (GC–MS). The elemental carbon (EC) contents were determined and ranged from 4.3 to 42 μg m− 3. Organic compounds in total extracts were identified and included unresolved complex mixture (UCM) and series of n-alkanes, n-alkanols, n-alkanoic acids, polycyclic aromatic hydrocarbons (PAHs); saccharides, alkanedioic acids, steroids, and other biomarkers and source tracers. The seasonal variations of their relative abundances are discussed. The abundance order for the major molecular classes in the particulate organic matter (POM) was the following: UCM > saccharides > n-alkanoic acids >n-alkanes > n-alkanols > PAHs > hydroxy-PAHs > other biomarker tracers. Based on the genetic significance of the molecular tracers, the dominant sources of POM are proposed for the two sampling sites. The emissions from fossil fuel use (both coal and petroleum products), biomass combustion, other pyrolysis sources, higher plant wax, and secondary products contribute > 98.0% of the POM mass. The fossil fuel use (average = 65% of POM) is the largest contributor and derives mainly from vehicular traffic.  相似文献   

16.
Gas and particle phase concentrations of atmospheric polychlorinated biphenyls (PCBs) were measured at an urban/industrial site in the city of Bursa, Turkey. PCB concentration levels were presented between July 2004 and May 2005. Average particle and gas phase concentrations of individual PCB congeners ranged from 0.08 (PCB-183) to 6.86 (PCB-49) pg m− 3 and from 0.01 (PCB-209) to 47.2 (PCB-33) pg m− 3, respectively. The mean concentration of total (gas + particle) PCBs varied between 24.27 and 666.21 pg m− 3 with an average of 287.27 ± 174.80 pg m− 3. PCB concentrations at the sampling site were higher than the concentrations reported at non-urban sites. PCBs partitioned between gas and particle phases and the partitioning was examined according to different approaches such as logKp–logPLo, logKp–logKOA and the Junge–Pankow model. In order to present possible interactions, a correlation matrix based on PCB congeners and meteorological parameters was constructed. Application of the Clausius–Clapeyron equation yielded a low slope value indicating possible emissions from local and regional sources originating mainly from urban/industrial areas, landfill and waste incineration plant. Then, likely dry deposition fluxes were estimated depending on reported dry deposition velocity and atmospheric concentration values.  相似文献   

17.

The seasonal variation of particulate matter and its relationship with meteorological parameters were measured at five different residential sites in Delhi. Sampling was carried out for one year including all three seasons (summer, monsoon, and winter). The yearly average concentration of particulate matter (PM2.5) was 135.16 ± 41.34 µg/m3. The highest average values were observed in winter (208.44 ± 43.67 µg/m3) and the lowest during monsoon season (80.29 ± 39.47 µg/m3). The annual average concentration of PM2.5 was found to be the highest at the Mukherjee Nagar site (242.16 µg/m3 ) during the winter and lowest at (Jawaharlal Nehru University) JNU (35.65 µg/m3) during the monsoon season. The strongest correlation between PM mass and a meteorological parameter was a strong negative correlation with temperature (R2=0.55). All other parameters were weakly correlated (R2<0.2) with PM mass.

  相似文献   

18.
Intensive measurements of gas and aerosol for 2 weeks were carried out at Qingdao (gas and aerosol in 2000, 2001 and 2002), Fenghuangshan (gas and aerosol in 2000 and 2001), and Dalian (aerosol in 2002) in the winter–spring period. High SO2 episodes were observed on 18 January 2000 at both Qingdao and Fenghuangshan. According to back trajectory calculations and analysis of gaseous species, high SO2 episodes were caused by local pollution and transport.Nitrate, sulfate and ammonium were the major species in PM2.5. Mass fractions of NO3−, nss-SO42− and NH4+ at Qingdao in 2002 were 10%, 12% and 5.5% for PM2.5, respectively, which were higher than that of nss-Ca2+ (1%). Chemical compositions observed at Dalian and Fenghuangshan were similar to those at Qingdao. The mass ratio of nss-SO42−/SO2 at Qingdao in winter was low (< 1.2), indicating that sulfate was probably produced by the slow oxidation of SO2 in the gas phase and/or was transported from outside of Qingdao in winter. The equivalent ratio of NH4+ to nss-SO42− was 1.39, suggesting that ammonium sulfate was one of the major chemical compositions in PM2.5. The NO3−/SO42− ratio at Qingdao was higher than that at remote places in East Asia. Gas and aerosol data obtained at Fenghuangshan were similar to data at Qingdao, suggesting that emissions from small cities may have a great influence on pollution in northern China.  相似文献   

19.
Long-term measurements of ambient particulate matter less than 2.5 μm in diameter (PM2.5) and its chemical compositions were performed at a rural site in Korea from December 2005 to August 2009. The average PM2.5 concentration was 31 μg m−3 for the whole sampling period, and showed a slightly downward annual trend. The major components of PM2.5 were organic carbon, SO42−, NO3−, and NH4+, which accounted for 55 % of total PM2.5 mass on average. For the top 10 % of PM2.5 samples, anionic constituents and trace elements clearly increased while carbonaceous constituents and NH4+ remained relatively constant. Both Asian dust and fog events clearly increased PM2.5 concentrations, but affected its chemical composition differently. While trace elements significantly increased during Asian dust events, NO3−, NH4+ and Cl were dramatically enhanced during fog events due to the formation of saturated or supersaturated salt solution. The back-trajectory based model, PSCF (Potential Source Contribution Function) identified the major industrial areas in Eastern China as the possible source areas for the high PM2.5 concentrations at the sampling site. Using factor analysis, soil, combustion processes, non-metal manufacture, and secondary PM2.5 sources accounted for 77 % of the total explained variance.  相似文献   

20.
Normal alkanes and PAHs in atmospheric PM10 aerosols collected during 2008 winter and spring in Baoji, a mid-scale inland city of China, were determined on a molecular level. Concentrations of n-alkanes ranged from 232 to 3583 ng/m3 with an average of 1733 ng/m3 in winter and from 124 to 1160 ng/m3 with an average of 449 ng/m3 in spring, while PAHs in the PM10 samples were 594 ± 405 and 128 ± 82 ng/m3 in the two seasons. Molecular compositions showed that CPI (odd/even) values of n-alkanes were close to unity for all the samples especially in winter, and diagnostic ratios of PAHs (e.g., Phe/(Phe + Ant), CPAH/ΣPAHs and IcdP/(IcdP + BghiP)) were found similar to those in coal burning smoke with a strong linear relationship (R2 ≥ 0.85) between PAHs and fossil fuel derived n-alkanes, demonstrating that coal burning is the main source of n-alkanes and PAHs in the city, especially in winter due to house heating. Concentrations of the determined compounds in Baoji are much higher than those in Chinese mega-cities, suggesting that air pollution in small cities in the country is more serious and need more attention.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号