首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
Abstract Melting experiments have been carried out on an olivine andesite of Mt Yakushi-Yama from the Miocene Setouchi volcanic belt in northeastern Shikoku, Japan. This andesite has been characterized by a low ratio of FeO*/Mg° (= 0.78). Phase relations have been determined within the pressure range of 2.8 to 19.3 kbar at 1000-1300°C under anhydrous and water-saturated conditions. At pressures less than 8.8 kbar, olivine is a liquidus phase. Orthopyroxene appears on the liquidus at 9.3 kbar under the anhydrous conditions. The multiple saturation point rises up to 17.5 kbar for water-saturated experiments. The andesite melt coexists with olivine and orthopyroxene just below the liquidus at 8.8–9.3 kbar and 1230°C for dry conditions, and at 17.5 kbar and 1060°C under water-saturated conditions. These experimental results indicate that the Yakushi-Yama olivine andesite magma could coexist with a harzburgitic mantle at depths between about 30 and 60 km, and at temperatures between 1060 and 1230°C. Experimental data also suggest a possibility that a high magnesian andesite magma would be generated by a direct partial melting of the uppermost harzburgitic mantle under anhydrous conditions.  相似文献   

2.
Melting experiments on a high-magnesian andesite   总被引：1，自引：0，他引：1  
Melting experiments were conducted on a high-magnesian bronzite olivine andesite (Teraga-Ike andesite) which is considered to be a primary andesite. The high-magnesian andesite magma is in equilibrium with both olivine and orthopyroxene at about 15.5 kbar and 1080°C under H2O-saturated conditions and at lower pressure and higher temperature under H2O-undersaturated conditions. This suggests that high-magnesian andesites could be generated by the partial melting of upper mantle peridotite containing a small amount of H2O.  相似文献   

3.
Origin of calc-alkalic andesite in the Japanese Islands is reviewed on the basis of the recent trace element data and new experimental results. It is suggested that calc-alkalic andesites in the Japanese Islands have at least four different origins; (1) fractional crystallization with separation of magnetite of high-alumina basalt magma, (2) partial melting of hydrous upper mantle peridotite (for magnesian andesite), (3) fractional crystallization with separation of olivine and/or orthopyroxene of magnesian andesite magma and (4) mixing of dacitic and basaltic magmas. Emphasis is placed on the possible generation of primary magnesian calc-alkalic andesite magmas by direct partial melting of the upper mantle peridotite under hydrous conditions at depths between 40 and 60 km.  相似文献   

4.
Twenty-three volcanic rocks from the Setouchi volcanic belt, southwest Japan, were analyzed for Nd and Sr isotopic compositions for the purpose of examining the genetic relationships among the basalt, high-magnesium andesite (HMA) and evolved porphyritic andesite. The andesites have higher87Sr/86Sr (0.70487–0.70537) and lower143Nd/144Nd (0.512509–0.512731) than the basalts, i.e., 0.70408–0.70468 and 0.512691–0.512830, respectively. This result confirms earlier conclusions obtained from petrologic study that the andesites cannot be fractionation products of basaltic magma but that the andesitic and basaltic magmas were generated independently. On the basis of melting experiments for HMA and basalt, it is inferred that there is an isotopically stratified mantle beneath southwest Japan. Evolved porphyritic andesites have essentially identical Sr and Nd isotopic ratios to HMA and can be derived by fractionation of primary andesitic magma. A model to produce orogenic andesite is proposed on petrologic, experimental and isotopic bases.  相似文献   

5.
Abstract Geochemical characteristics of rhyolites from the Miocene Setouchi volcanic belt in the Southwest Japan arc were examined. The following observations may be best explained by the derivation of rhyolite magmas by melting of subducting sediments as follows. (i) Sr-Nd-Pb isotope compositions of Setouchi rhyolites are close to those of the local trench-fill sediments; (ii) major element compositions of rhyolites are identical to those of experimentally produced sediment melts; and (iii) concentrations of incompatible elements in rhyolites are consistent with partial melting of the local trench-fill sediments in the presence of residual garnet. Furthermore, trace element and isotope signatures of Setouchi high-Mg andesites can be also rationalized by interaction of such rhyolitic sediment melts with overlying mantle peridotites.  相似文献   

6.
High-magnesian andesites of middle Miocene age occur in southwest Japan, forming an obvious volcanic belt. These andesites have low FeO*/MgO ratios (0.546–0.931), and are rich in Ni (101–312 ppm), Co (30.0–45.1 ppm), and Cr (208–756 ppm). They are relatively aphyric (phenocrysts <10 vol.%), and the phenocrysts of magnesian olivine (～Fo88) are in equilibrium with the host high-magnesian andesite magmas on the basis of the Fe-Mg exchange partitioning. These features suggest that the high-magnesian andesites are not differentiated or accumulative; they appear to represent primary andesites generated in the upper mantle. These southwest Japanese high-magnesian andesites are rich in incompatible elements, and show light rare earth enrichment relative to boninites, suggesting that the former is derived from a less depleted mantle source than the latter.  相似文献   

7.
In a study of the origin of basalt magma, peridotite has been partially fused and the composition of the liquid phases determined. Peridotite was chosen because it is thought to be the most likely material of the upper mantle. Geological evidence suggests that the upper mantle is not of basaltic composition and eclogitic mineralogy but that it is of ultrabasic composition. Although under some conditions an ultrabasic mantle may be within the field of eclogite stability, the comparative rarity of high-pressure phases such as garnet in ultrabasic nodules suggests that normal basalts are derived from non-eclogitic regions. The peridotite composition selected for experimental work was that of average peridotite (Nockolds). Charges of the synthetic peridotite were held at constant temperature (±1/2°C) in a non-oxidising atmosphere for one week. After quenching, the glass was extracted and analysed. The glass content varied from 4% at 1250°C to 26% at 1355°C. Its composition ranged from a basalt more or less saturated in normative silica at a temperature of 1310°C (15% fusion) and below, to picrite basalt at higher temperatures. The results confirm the general assumption that basalts can be the product of the partial fusion of peridotite. To date, the experimental work has been under anhydrous conditions at atmospheric pressure.  相似文献   

8.
The Setouchi volcanic rocks include high-Mg andesites (HMAs) and garnet-bearing dacite–rhyolite, and are sporadically distributed along the Median Tectonic Line, Japan. New U–Pb zircon ages and geological and geochemical data are presented for those rocks in the Western Setouchi region (W-Setouchi). Previous studies referred to the altered andesite in the W-Setouchi as “pre-Setouchi volcanic rocks.” However, on the basis of the new U–Pb age (14.4 Ma ± 0.3 Ma) and geochemical characteristics, we redefine it as the Jikamuro Formation, part of the Setouchi volcanic rocks. Incompatible elements are more enriched in the Jikamuro Formation rocks than in the Setouchi HMAs. The characteristic element compositions may be explained by mixing of compositionally different magmas, including subducted sediment melts, plus a contribution from crustal contamination. A stress-inversion technique with Bingham distribution method was applied to the orientations of felsic and mafic dikes within the Setouchi volcanic rocks, and indicates paleo-stress conditions during the period of Setouchi volcanism in the W-Setouchi. The analysis reveals NNW-extensional stresses and a strike-slip stress. We infer that the former represents extensional conditions during the main period of volcanism and the latter represents a stress transition during the most recent period of volcanism (after 12 Ma).  相似文献   

9.
The solubility of fluorapatite in a wide variety of basic magmatic liquids was experimentally determined over a range of upper mantle P-T conditions (8–25 kbar, 1275–1350°C). Fluorapatite is stable over the entire range of conditions investigated, but its solubility in melts is variable, depending negatively on SiO2 content of the melt and positively upon temperature, with relatively little sensitivity to pressure above 8 kbar. At upper mantle pressures and a temperature of 1250°C, molten basalt (50% SiO2) will dissolve 3–4 wt.% P2O5 before saturation in apatite is reached. For a magma 100°C cooler or containing 10 wt.% more SiO2, apatite saturation occurs at less than 2 wt.% dissolved P2O5. The observed high solubility of apatite in basic magmas at their normal near-liquidus temperatures virtually precludes the occurrence of residual apatite in mantle source regions. If relatively low-temperature melting conditions prevail (e.g., 1100°C), as might be possible in H2O-bearing regions of the upper mantle, apatite could remain in the residue, but only in amounts too small to have significant effects on the rare earth patterns of the liquids.Because of the high solubility of apatite in basic magmas, phosphorus can be confidently treated as an incompatible element in peridotite melting models. Such models, in combination with observed characteristics of basic lavas, indicate that the upper mantle contains ～200 ppm of phosphorus, much less than the chondritic abundance of ～900 ppm.  相似文献   

10.
REE, Y, Rb, Sr, Cs, Ba, Pb, Th, U, Zr, Hf, and Sn are reported for a basalt, low-Si andesite, andesite, high-K andesite, dacite and rhyolite from the calc-alkaline volcanic belt of Calimani-Harghita Mountains (Rumenian Carpathians). The basalt, low-Si andesite and andesite show identical chondrite-normalized REE patterns with fractionated light REE (La-Sa) and unfractionated heavy REE (Gd-Yb). The dacite shows similar pattern but lower ΣREE. The high-K andesite and rhyolite have a distinctively different REE pattern strongly fractionated for both light and heavy REE. These differences point to different genetical mechanism for the high-K andesite-rhyolite and basalt-low-Si andesite-andesite-dacite magmas. The high-K andesite and rhyolite magmas are believed to represent primary melts of an undergoing oceanic slab; the basalt, low-Si andesite, andesite and dacite magmas are considered to be produced by partial melting of garnet pyroxenite bodies derived by reaction between the primary melts of the undergoing oceanic slab and the peridotitic mantle overlying the Benioff zone.  相似文献   

11.
A high-magnesian andesite (SiO2 58.50%, MgO 9.47%) occurs at Teraga-Ike in southwest Japan. It belongs to the Setouchi volcanic rocks of middle Miocene age and carries olivine and bronzite as phenocrysts (4.2 and 1.4 modal percent, respectively). This andesite is characterized by Mg-values as high as 75, suggesting that it may be a primary andesite. Olivine phenocrysts (Fo87–91) are in equilibrium with the groundmass (= liquid) on the basis of Fe-Mg exchange partitioning between olivine and liquid, and they have high NiO contents (up to 0.45%). Chromite inclusions in olivine and rarely bronzite have high Cr2O3 contents (max. 54.87%). These features strongly suggest that the Teraga-Ike andesite keeps the chemical composition of the primary magma generated in the upper mantle, and therefore verify the existence of primary andesite magmas.  相似文献   

12.
Hiroyuki  Ishimoto  Kenji  Shuto  Yoshihiko  Goto 《Island Arc》2006,15(2):251-268
Abstract   Middle Miocene to Quaternary primitive basalts and high magnesian andesite (HMA) in North Hokkaido resulted from three periods of intense volcanism; early-stage (12–10 Ma), middle-stage (9–7 Ma) and late-stage (3–0 Ma). Based on the chemical compositions of olivines and chromian spinels and bulk chemistry of the primitive rocks, we examined depths of segregation of the calculated primary magmas and the degrees of partial melting of the source mantle. In the context of asthenospheric mantle upwelling, petrological data from the present study can be accounted for by the secular change in the depth of magma segregation from the upwelled asthenospheric mantle, which is composed of fertile peridotite. Thus, the early-stage primary magmas were generated by higher degrees of partial melting of the shallower part of hot asthenospheric mantle, whereas the middle- and late-stage primary magmas resulted from lower degrees of partial melting of a deeper part of the asthenospheric mantle. The early-stage HMA magma was generated by partial melting of the remnant subcontinental lithospheric mantle composed of refractory peridotite. This melting might have resulted from an increased geothermal gradient caused by upwelling of hot asthenosphere.  相似文献   

13.
The Iliniza Volcanic Complex (IVC) is a poorly known volcanic complex located 60 km SSW of Quito in the Western Cordillera of Ecuador. It comprises twin peaks, North Iliniza and South Iliniza, and two satellite domes, Pilongo and Tishigcuchi. The study of the IVC was undertaken in order to better constrain the role of adakitic magmas in the Ecuadorian arc evolution. The presence of volcanic rocks with an adakitic imprint or even pristine adakites in the Ecuadorian volcanic arc is known since the late 1990s. Adakitic magmas are produced by the partial melting of a basaltic source leaving a garnet rich residue. This process can be related to the melting of an overthickened crust or a subducting oceanic crust. For the last case a special geodynamic context is required, like the subduction of a young lithosphere or when the subduction angle is not very steep; both cases are possible in Ecuador. The products of the IVC, made up of medium-K basaltic andesites, andesites and dacites, have been divided in different geochemical series whose origin requires various interactions between the different magma sources involved in this subduction zone. North Iliniza is a classic calc-alkaline series that we interpret as resulting from the partial melting of the mantle wedge. For South Iliniza, a simple evolution with fractional crystallization of amphibole, plagioclase, clinopyroxene, magnetite, apatite and zircon from a parental magma, being itself the product of the mixing of 36% adakitic and 64% calc-alkaline magma, has been quantified. For the Santa Rosa rhyolites, a slab melting origin with little mantle interactions during the ascent of magmas has been established. The Pilongo series magma is the product of a moderate to high degree (26%) of partial melting of the subducting oceanic crust, which reached the surface without interaction with the mantle wedge. The Tishigcuchi series shows two stages of evolution: (1) metasomatism of the mantle wedge peridotite by slab melts, and (2) partial melting (10%) of this metasomatized source. Therefore, the relative ages of the edifices show a geochemical evolution from calc-alkaline to adakitic magmas, as is observed for several volcanoes of the Ecuadorian arc.  相似文献   

14.
Three rocks representing the calc-alkaline rock series gabbro-tonalite-granite or basalt-andesite-rhyolite were reacted with varying percentages of water in sealed capsules between 600 and 1300°C and pressures to 36 kbars, corresponding to depths of more than 120 km within the earth. For each rock we present complete P-T diagrams with excess water, and the water-undersaturated liquids surface projected from P-T-XH2O space mapped with contours for constant H2O contents and with the fields for near-liquidus minerals. All changes in liquidus and solidus slopes can be correlated with changes in mineralogy from less dense to more dense, or with expansion of crystallization fields, without appeal to changes in molar volume of H2O in liquid and vapor phases. The results indicate that tholeiites and andesites of the calc-alkaline series with compositions similar to the rocks studied are not primary magmas from mantle peridotite at depths greater than about 50 km. Primary andesitic magmas from shallower levels would require very high water contents and we do not believe such magmas could normally reach the surface. The liquids results are consistent with the derivation of andesites with little dissolved water as primary magmas from subducted ocean crust (quartz eclogite), but multi-stage models are preferred. Temperatures required for the generation of andesites by fusion of continental crust are higher than considered reasonable. The evidence precludes the generation of primary rhyolites or granites from the mantle of subducted oceanic crust at mantle depths. Primary rhyolite or granite magmas with moderate water contents (saturated or undersaturated) can be generated in the crust at reasonable temperatures, and could reach near-surface levels before vesiculation. Water-undersaturated granite liquid with residual crustal minerals could constitute plutonic magmas of intermediate composition.  相似文献   

15.
Spinel-lherzolite xenoliths have been found in olivine tholeiite near Andover in the Tasmanian Tertiary volcanic province. They show a high-pressure mineralogy of predominant olivine (Mg90), with aluminous enstatite (Mg90) and lesser aluminous diopside and chrome-bearing spinel, and resemble lherzolite xenoliths commonly found in undersaturated lavas. Such xenoliths are unusual in tholeiitic basalts and the occurrence directly attests to a mantle origin for at least some tholeiitic magmas.The lherzolites are accompanied by doleritic and pyroxenitic xenoliths and by olivine, orthopyroxene, clinopyroxene and plagioclase xenocrysts. If near-liquidus phases are represented amongst the xenocrysts, then the magnesian number of the host basalt and its xenocryst assemblage provisionally suggest a magma derived by more than 15–20% partial melting of mantle peridotite, before commencing xenocryst crystallisation at pressures between 8–13 kbar.With this new record, lherzolite-bearing lavas in Tasmania now cover an extremely wide compositional range, extending from highly undersaturated olivine melilitite to olivine tholeiite. They also include a considerable number of fractionated alkaline rocks that are only sparsely reported in the literature as lherzolite hosts. This latter group contains representatives of a previously suggested but unestablished alkaline fractionation series based on olivine nephelinite, viz. calcic olivine nephelinite → sodic olivine nephelinite → potassi-sodic olivine nephelinite → mafic nepheline benmoreite → mafic phonolite.Lherzolite and megacryst-bearing lavas are relatively more abundant in peripheral parts to the main basalt sequences in Tasmania. This suggests that they developed in fringing zones of less intense mantle melting which enhanced stagnation and fractionation of magmas within the mantle before eruption. Calculated crustal thicknesses under these areas suggest that the magmas were generated at pressures exceeding 6–11 kbar, with the Andover tholeiitic magma exceeding 9 kbar.  相似文献   

16.
Phase equilibria in a portion of the system forsterite-plagioclase (An50Ab50 by weight)-silica-H2O have been determined at 15 kbar pressure under H2O-saturated conditions. The composition of the liquid pertinent to the piercing point forsterite + enstatite solid solution + amphibole + liquid + vapor is similar to that of calc-alkaline andesite. The electron microprobe analysis of the glass coexisting with the above three crystalline phases is very close to that of the piercing point determined by phase assemblage observations; however, the glass near (< 8 μm) forsterite crystals is significantly depleted in the normative forsterite component. With the addition of 10 wt.% KAlSi3O8, the composition of this piercing point becomes even closer to the compositions of calc-alkaline andesites. It is also shown that the liquid coexisting with forsterite and enstatite solid solution remains silica-rich (60–62 wt.%) over a wide (～ 100°C) temperature range. The present experimental studies support the view that liquids similar in composition to calc-alkaline andesites can be generated by direct partial melting of hydrous upper mantle at least at or near 15 kbar.  相似文献   

17.
The Taupo Volcanic Zone forms part of the Taupo-Hikurangi subduction system, and comprises five volcanic centres: Tongariro, Taupo, Maroa, Okataina and Rotorua. Tongariro Volcanic Centre is formed almost entirely of andesite while the other four centres contain predominantly rhyolitic volcanics and later fissure eruptions of high-Al basalt. Estimated total volume of each lava type are as follows: 2 km3 of high-Al basalt (< 0.1%); 260 km3 of andesite (< 2.5%); 5 km3 of dacite (< 0.1%); > 10,000 km3 of rhyolite and ignimbrite (> 97.4%).The location of the andesites and vent alignments suggest a source from a subduction zone underlying the area. However, the lavas differ chemically from island-arc andesites such as those of Tonga; in particular by having higher contents of the alkali elements, light REE and Sr and Pb isotopes. This suggests some crustal contamination, and it is considered that this may occur beneath the wide accretionary prism of the subduction system. Amphibolite of the subduction zone will break down between 80 and 100 km and a partial melt will rise. A multi-stage process of magma genesis is then likely to occur. High-Al basalts are thought to be derived from partial melting of a garnet-free peridotite near the top of the mantle wedge overlying the subduction zone, locations of the vents controlled largely by faults within the crust. Rhyolites and ignimbrites were probably derived from partial melting of Mesozoic greywacke and argillite under the Taupo Volcanic Zone. Initial partial melting may have been due to hydration of the base of the crust; the “water” having come from dehydration of the downgoing slab. The partial melts would rise to form granodiorite plutons and final release of the magma to form rhyolites and ignimbrites was allowed because of extension within the Taupo graben.Dacites of the Bay of Plenty probably resulted from mixing of andesitic magma with small amounts of rhyolitic magma, but those on the eastern side of the Rotorua-Taupo area were more likely formed by a higher degree of partial melting of the Mesozoic greywacke-argillite basement. This may be due to intrusion of andesite magma on this side of the Taupo volcanic zone.  相似文献   

18.
The Pleistocene-Recent volcanism of this arc extends nearly linearly NNE from northern New Zealand for some 2800 km. Along its western margin lies an active marginal basin (Lau Basin and Havre Trough) which has its southern termination in the Taupo volcanic zone (TVZ, New Zealand). The New Zealand arc segment is developed within a continental crust, whereas the Tonga-Kermadec segments are developed on a ridge system within the oceanic basin. Submarine morphology suggests that the Kermadec volcanoes represent a less advanced stage of evolution relative to those of Tonga.Magmas erupted within the TVZ are dominantly rhyolitic (≈16,000 km3) with subordinate andesites and rare high-alumina tholeiites and dacites. The Kermadec Islands are dominated by tholeiites and basaltic andesites, with subordinate andesites and dacites. The Tongan Islands are dominated by basaltic andesites, with locally developed andesites and dacites. These Tonga-Kermadec lavas are characterised by subcalcic groundmass clinopyroxenes, whereas the younger group of TVZ andesites contain groundmass hypersthene and augite.Geochemically, the TVZ andesites are systematically enriched (relative to those of Tonga-Kermadec) in “incompatible” elements (e.g. K, Rb, Cs, Ba, light REE, U, Th, Zr, Pb), are less Fe-enriched, and contain more radiogenic Sr and Pb (excepting certain 207Pb/204Pb compositions). The evidence points to crustal equilibration of the TVZ andesites prior to eruption.A complete overlap of major and trace element chemistry (including TiO2) is observed between the Kermadec-TVZ tholeiites and basaltic andesites, and the ocean floor tholeiites of the Lau Basin. Compared to the Tongan lavas, those of the Kermadecs exhibit a greater degree of chemical variability, also reflected in the greater heterogeneity in their Pb isotopic compositions. Moreover, many of the Tonga-Kermadec basaltic andesites exhibit more depleted “incompatible” trace element abundances than the Kermadec and TVZ tholeiites.The “primary” magmas of this arc are interpreted to be of basaltic andesite type, derived from Benioff zone melting (essentially anhydrous), but extensively modified by low-pressure crystal fractionation processes. The Kermadec tholeiites are explained as products of relatively shallow upper mantle partial fusion induced during the earlier stages of diapiric rise of Benioff zone-derived magmas, which are sufficiently hot to intersect the peridotite solidus. This should result in the production and intermixing of a series of magmas extending from olivine tholeiite to basaltic andesite composition. The voluminous rhyolites of TVZ are interpreted as the products of crustal fusion involving Mesozoic sediments.  相似文献   

19.
Many ocean island basalts (OIB) that have isotopic ratios indicative of recycled crustal components in their source are silica-undersaturated and unlike silicic liquids produced from partial melting of recycled mid-ocean ridge basalt (MORB). However, experiments on a silica-deficient garnet pyroxenite, MIX1G, at 2.0-2.5 GPa show that some pyroxenite partial melts are strongly silica-undersaturated [M.M. Hirschmann et al., Geology 31 (2003) 481-484]. These low-pressure liquids are plausible parents of alkalic OIB, except that they are too aluminous. We present new partial melting experiments on MIX1G between 3.0 and 7.5 GPa. Partial melts at 5.0 GPa have low SiO2 (<48 wt%), low Al2O3 (<12 wt%) and high CaO (>12 wt%) at moderate MgO (12-16 wt%), and are more similar to primitive OIB compositions than lower-pressure liquids of MIX1G or experimental partial melts of anhydrous or carbonated peridotite. Solidus temperatures at 5.0 and 7.5 GPa are 1625 and 1825°C, respectively, which are less than 50°C cooler than the anhydrous peridotite solidus. The liquidus temperature at 5.0 GPa is 1725°C, indicating a narrow melting interval (∼100°C). These melting relations suggest that OIB magmas can be produced by partial melting of a silica-deficient pyroxenite similar to MIX1G if its melting residue contains significant garnet and lacks olivine. Such silica-deficient pyroxenites could be produced by interaction between recycled subducted oceanic crust and mantle peridotite or could be remnants of ancient oceanic lower crust or delaminated lower continental crust. If such compositions are present in plumes ascending with potential temperatures of 1550°C, they will begin to melt at about 5.0 GPa and produce appropriate partial melts. However, such hot plumes may also generate partial melts of peridotite, which could dilute the pyroxenite-derived partial melts.  相似文献   

20.
Abstract On the island of Mustique, fresh and propylitized olivine–plagioclase–clinopyroxene basalt, plagioclase–clinopyroxene–orthopyroxene and plagioclase–clinopyroxene–amphibole andesite lavas and minor intrusions are interbedded with Oligocene pyroclastic and epiclastic rocks. Chemical data show that two isotopically identical, but chemically different, suites of lava are present: (i) the OPXS (87Sr/86Sr 0.70403–0.70454; 143Nd/144Nd 0.512952–0.512986; δ18Ocpx 5.49 and 5.61), comprising basalts and orthopyroxene‐bearing andesites; and (ii) the AMPHS (87Sr/86Sr 0.70401–0.70457; 143Nd/144Nd 0.512981–0.513037; δ18Ocpx 5.54), made up of basalts and amphibole‐bearing andesites. The OPXS has higher contents of TiO2, P2O5, light rare earth elements, Sm, Pb, Th, U, Zr, Y and Nb, and higher La/Yb ratios than the AMPHS. The isotopic data suggest that both suites formed from melts derived from the same subduction‐modified depleted mantle source as the volcanic rocks of nearby St Vincent and Bequia, and the northern islands of the Lesser Antilles Arc. The immobile trace element contents, and La/Yb ratios, of the OPXS are indicative of ～10% partial melting of the source, whereas those of the AMPHS are indicative of ～25% partial melting. The within‐suite chemical variation of the OPXS is consistent with ～45% fractional crystallization of its intratelluric mineral assemblages, and that of the AMPHS is consistent with the removal of ～65% of its intratelluric assemblages. Experimental evidence suggests that both suites of basalt crystallized at pressures <8 kbar from melts containing 1–2 wt% water. After extensive fractional crystallization, the andesites crystallized at pressures between approximately 5 and 2 kbar. The OPXS magmas appear to have lost more of their water content than the AMPHS magmas. Thus, the OPXS andesites formed from melts with an estimated water content of 2–3 wt%, whereas the AMPHS andesites formed from melts containing at least 4.5 wt% water.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号