首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
ABSTRACT

This article presents a testing study on the strain-rate effects on the stress--strain behavior of natural, undisturbed Hong Kong marine deposits (HKMD) from three Hong Kong locations, including a one-dimensional (1-D) compressibility in a confined condition, and undrained shear strengths in triaxial compression and extension modes. The influences of the strain rates on the one-dimensional compressibility are studied by means of constant rate of strain (CRS) tests and multistage loading oedometer (MSL) tests, and those on the undrained shear strengths are studied by K o-consolidated undrained compression and extension tests with step-changed axial strain rates (CK oUC and CK oUE tests), and with both step-changed axial strain rates and relaxation processes (CK oUCR and CK oUER tests). The strain-rate effects on the stress--strain behavior are generally examined by “apparent” preconsolidation pressures in the 1-D compressions and undrained shear strengths in the triaxial compression and extension stress states. The stress--strain behavior of the natural, undisturbed HKMD exhibits considerable viscous characteristics. In the CRS and MSL tests at a given strain, the higher the strain rate, the higher the effective stress, the higher the porewater pressure. In the undrained shearing tests, the higher the strain rate, the higher the undrained shear strength, but the lower the porewater pressure. For the CK oUC and CK oUE tests on the Tsing Yi site samples, the undrained shear strength increases by 8.5% and 12.1% for one order increment of axial strain rate of 0.2%/hr (i.e., ρ0.2) for the compression and extension modes respectively. For the CK oUCR and CK o tests on the Tung Chung site samples of different compositions, average ρ0.2 is increased by 6.2% for the compression and 9.5% for the extension, but by 18.8% for the extension on a higher plastic sample. The present study shows that the strain-rate effects on the stress--strain behavior of the undisturbed HKMD are larger for specimens in extension than those in compression.  相似文献   

2.
This article presents results from a series of Ko-consolidated compression and extension triaxial tests on specimens from undisturbed samples of Hong Kong Marine Deposits (HKMD). To investigate the strain-rate effects, a total of seven Ko-consolidated triaxial tests were conducted including four compression tests and three extension tests. After Ko-consolidation, the triaxial test specimens were sheared at step-changed axial strain rates under three different confining pressures of 50 kPa, 150 kPa, and 400 kPa, respectively. The step-changed strain rates were applied in the following order: +2%/h, +0.2%/h, +20%/h, -2%/h (unloading) and +2%/h (reloading) for the four compression tests and -2%/h, -0.2%/h, -20%/h, +2%/h (unloading) and -2%/h (reloading) for the three extension tests. The results are reported and analyzed in the paper. The results show that the strain rate effects, the stress-strain characteristics, and the effective stress paths of the specimens for tests in a compression state are different from those for tests in an extension stage. One order of magnitude increase in axial strain rate causes an average 8.6% increase in undrained shear strength for compression tests and a 12.1% increase for extension tests. It is also found that the failure mode of the specimens in compression is different from that in extension. The stress-strain behavior of specimens shows strain-softening and a clear shear band in compression tests, but strain-hardening without any clear shear band in extension tests for the same absolute value of axial strain.  相似文献   

3.
This article introduces the application of a stability analysis method that accounts for strength anisotropy on the embankment constructed at the Kobe airport. Shear strength anisotropy is induced by the in-situ state of stress along a potential slip surface of the embankment. In addition, the effects of the shearing rate on the undrained shear strength of the marine clay are examined in detail based on the results of a series of constant-volume direct shear box (DSB), triaxial compression (TC), and triaxial extension (TE) tests varying shearing rates. The most critical slip surface was selected from the deterministic slope stability analysis using unconfined compression tests of undisturbed clay samples from the field. For the most critical slip surface, the potential factor of safety of the embankment is estimated to be within the range of 1.21 to 1.28, as indicated by the results of the stability analyses using the strengths obtained from the DSB, TC, and TE tests and varying shearing rates.  相似文献   

4.
Natural Ariake clays are characterized by high sensitivity. In this study, the mechanism and the factors controlling undrained shear strengths of both undisturbed and remolded Ariake clays are discussed. A series of unconfined compressive tests were performed on undisturbed samples of natural Ariake clays. The remolded undrained shear strength is predicted using a quantitative expression derived from extensive data of remolded undrained shear strength for a number of soils compiled from resources in the literature. The sensitivity of natural Ariake clays derived from the ratio of half of unconfined compressive strength for undisturbed samples to remolded undrained shear strength is found to be affected by both natural water content and normalized water content that is defined as the ratio of natural water content to liquid limit. The smaller the natural water content, the higher the sensitivity is at the same normalized water content. At the same natural water content, the larger the normalized water content, the higher the sensitivity is.  相似文献   

5.
ABSTRACT

Natural Ariake clays are characterized by high sensitivity. In this study, the mechanism and the factors controlling undrained shear strengths of both undisturbed and remolded Ariake clays are discussed. A series of unconfined compressive tests were performed on undisturbed samples of natural Ariake clays. The remolded undrained shear strength is predicted using a quantitative expression derived from extensive data of remolded undrained shear strength for a number of soils compiled from resources in the literature. The sensitivity of natural Ariake clays derived from the ratio of half of unconfined compressive strength for undisturbed samples to remolded undrained shear strength is found to be affected by both natural water content and normalized water content that is defined as the ratio of natural water content to liquid limit. The smaller the natural water content, the higher the sensitivity is at the same normalized water content. At the same natural water content, the larger the normalized water content, the higher the sensitivity is.  相似文献   

6.
Istanbul, the largest city in Turkey and one of the major metropolitan areas in the world, cleaned one of its environmentally polluted areas—Golden Horn—by dredging 5 million m3 of the bottom sediments and pumping the resulting sludge to a storage area behind a dam built at an abandoned rock quarry site in Alibey district. The reclamation of the land that formed over the storage area of Golden Horn dredged material is socially and economically very desirable. In this paper, results from experimental studies that are focused on determining the shear strength behavior of the dredge material and undisturbed soil are presented. Slurry consolidometer test, large model tests and small model tests are used to consolidate the dredged soil samples from Halic to simulate the natural consolidation behavior of these soils. Shear strength parameters are determined by laboratory vane tests; unconfined compression tests; undrained-unconsolidated (UU) and consolidated-undrained (CU) triaxial tests on samples that are obtained through in situ undisturbed samples and laboratory model tank and slurry consolidation. Moreover, the effects of fly ash and lime additives on the undrained shear strength were determined by mixing the materials with the dredged clay from Golden Horn during the model experiments conducted in the laboratory. Based on these findings, equations are proposed that govern the relationships between undrained shear strength and water content value.  相似文献   

7.
通过对南海重塑粉质粘土土样的大量动三轴试验结果分析,得到此种土在波浪荷载作用后不捧水抗剪强度衰化同动载作用引起的动应变幅及平均累积孔压之间的相互关系和预估公式;并通过与超固结土样的静三轴剪切试验结果的比较,发现动、静三轴两种试验结果具有很好的吻合关系。建议可用超固结土样的静三轴剪切试验同时结合部分动三轴试验来预估土样在波浪荷载作用后不排水抗剪强度衰化与平均累积孔压之间的关系。  相似文献   

8.
未胶结钙质砂静力和循环强度的单剪试验研究   总被引：1，自引：1，他引：0  
王晓丽  裴会敏  王栋 《海洋工程》2018,36(6):124-129
通过等体积的单调和循环单剪试验研究南海未胶结钙质砂的静、动力反应,讨论应力水平和相对密实度对钙质砂静、动力强度的影响,并与典型的石英砂性质进行比较。在单调单剪试验中,中密和密实钙质砂在100～400 k Pa范围的初始竖向应力下都表现出应变硬化的性质,有效内摩擦角随剪应变增大。在循环单剪试验中,钙质砂的反应与相对密实度和初始竖向应力密切相关,但中密和密实钙质砂中的等效孔压都能达到初始竖向应力的85%～90%,此时剪应变突增,试样发生破坏。与相近密实度的石英砂相比,钙质砂抵抗液化的能力更强。提出了南海钙质砂动强度的归一化表达式,建立了不排水静强度、不排水动强度和循环次数之间的关系。  相似文献   

9.
Based on classification tests, oedometer tests, fall-cone tests and triaxial tests, physical and mechanical properties of sediments in the Storegga Slide region were analysed to assess parameter interrelationships. The data show good relationships between a number of physical and mechanical parameters. Goodness of fit between compression index and various physical parameters can be improved by multiple regression analysis. The interclay void ratio and liquidity index correlate well with the undrained shear strength of clay. Sediments with higher water content, liquid limit, activity, interclay void ratio, plasticity index and liquidity index showed higher compression index and/or lower undrained shear strength. Some relationships between parameters were tested by using data from two other sites south of the Storegga Slide. A better understanding of properties of sediments in regions such as that of the Storegga Slide can be obtained through this approach.  相似文献   

10.
Based on a series of cyclic triaxial tests, the effect of cyclic frequency on the undrained behaviors of undisturbed marine clay is investigated. For a given dynamic stress ratio, the accumulated pore water pressure and dynamic strain increase with the number of cycles. There exists a threshold value for beth the accumulated pore water pressure and dynamic strain, below which the effect of cyclic frequency is very small, but above which the accumulated pore water pressure and dynamic strain increase intensely with the decrease of cyclic frequency for a given number of cycles. The dynamic strength increases with the increase of cyclic frequency, whereas the effect of cyclic frequency on it gradually diminishes to zero when the number of cycles is large enough, and the dynamic strengths at different frequencies tend to the same limiting minimum dynamic strength. The test results demonstrate that the reasons for the frequency effect on the undrained soil behaviors are beth the creep effect induced by the loading rate and the decrease of sample effective confining pressure caused by the accumulated pore water pressure.  相似文献   

11.
Soft kaolinite deposits of marine origin are encountered as foundation soils in many parts of the world. The well-developed flocculated structure of kaolinite-bearing marine deposits is amenable to alterations from leaching of pore solution salts, loss of overburden, and secondary compression. Secondary compression causes densification of microstructure that may impact the viscous resistance, soil stiffness, and undrained shear strength of kaolinite-bearing marine deposits. This study examines the influence of secondary compression on viscous resistance and constrained stress–strain modulus of soft kaolinites prepared in synthetic seawater and sodium chloride solutions. The impact of secondary compression on undrained shear strength is interpreted from changes in microstructure, percent monovalent cation concentration, viscous resistance, and constrained stress–strain modulus. Kaolinite specimens experience reduction in void space during secondary compression. Breakdown of edge–face (E–F) and edge–edge (E–E) contacts of kaolinite particles during secondary compression and creation of interlocking zones is observed from scanning electron micrograph studies. Breakdown of E–F and E–E contacts is considered responsible for reduction in constrained stress–strain modulus during secondary compression. Concomitant, creation of interlocking zones at particle contacts increases the viscous resistance of microstructure that enhances the undrained shear strength of soft kaolinites.  相似文献   

12.
The undrained shear strength normalized by the yield consolidation pressure, su/pc', is presented for four coastal sites: Busan/Gwangyang and Incheon/Gunsan, having the characteristics of high and low plasticity, respectively. The field vane shear strengths, su(FVT), were compared with unconfined compressive strength, qu/2 which has been used as a representative testing method in Korea. Many researchers have suggested that the undrained shear strength normalized by the yield consolidation pressure, su/pc', depends on Ip. However, the undrained shear strength normalized by the yield consolidation pressure, su/pc' is in the range of 0.25–0.35, independently of the plasticity index, Ip except for su/pc' using qu/2 values in the case of soils having a low plasticity, such as Incheon and Gunsan intermediate soils.

Bjerrum's correction factor has been commonly applied to evaluate mobilized undrained shear strength using the field vane test in Korea. However, the corrected undrained shear strengths using Bjerrum's correction factor, including Morris and Williams' method, were considerably underestimated for Korean marine clay when compared with the qu/2 values that have been used as the mobilized undrained shear strength for practical design in Korea.  相似文献   

13.
A postbuckling analysis is presented for a shear deformable anisotropic laminated cylindrical shell with stiffener of finite length subjected to axial compression. The material of each layer of the shell is assumed to be linearly elastic, anisotropic and fiber-reinforced. The governing equations are based on a higher order shear deformation shell theory with von Kármán-Donnell-type of kinematic nonlinearity and including the extension/twist, extension/flexural and flexural/twist couplings. The ‘smeared stiffener’ approach is adopted for the beam stiffeners. This arrangement allows the beam stiffeners to be assembled directly into the global stiffness matrix. The nonlinear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling response of perfect and imperfect, grid, axial, ring stiffened, and unstiffened shells. The results confirm that there exists a compressive stress along with an associate shear stress and twisting when the anisotropic shell is subjected to axial compression. The postbuckling equilibrium path is unstable for the moderately thick cylindrical shell under axial compression and the stiffened shell structure is imperfection-sensitive.  相似文献   

14.
The compressibility characteristics of Singapore marine clay in reconstituted and undisturbed states were studied using oedometer, constant rate of strain, Rowe cell, and isotropic consolidation tests. The intrinsic compression curve of the reconstituted clay was found to be similar to that proposed earlier with some minor deviations at low vertical stresses of less than 100?kPa. The field and laboratory compression behaviors were found to be similar, hence the laboratory curve could be used as a reference for interpreting the field behavior. Factors affecting the measurements of compression index and yield stress were discussed. As the coefficient of lateral earth pressure at the top upper clay was close to 1, the compression curves of vertically and horizontally trimmed samples were almost similar. The yield stress was mainly controlled by the strain rate; i.e., the higher strain rate resulted in the higher yield stress. Constrained modulus as derived from cone penetration tests and flat dilatometer tests were also examined and compared with laboratory test results. The in situ tests showed the decrease in constrained modulus with depth and generally the dilatometer test was found to register a higher modulus value.  相似文献   

15.
The post-cyclic behavior of biogenic carbonate sand was evaluated using cyclic triaxial testing through a stress control method under different confining pressures between 50 to 600 kPa. The testing program included a series of isotropically and anisotropically consolidated, undrained triaxial compression and extension tests on samples of remolded calcareous Bushehr sand. Grading analyses (before and after each test) were used to examine the influence of particle breakage on post-cyclic behavior of Bushehr sand. The particle breakage commonly occurred in these soils even in lower values of confining pressure, yet there was not a clear correlation between the post-cyclic responses and particle breakage. Based on the present study, a concept is suggested for post-cyclic behavior of carbonate sand. It was observed that post-cyclic strength has a good correlation with cyclic stress ratio, type of consolidation, and value of residual cyclic strain. For all specimens, it is clear that the post-cyclic strength is greater than monotonic strength, irrespective of confining pressure and relative density.  相似文献   

16.
The paper presents the results of a series of monotonic and cyclic triaxial shear tests carried out to study the influence of the strain effect and load cycles on the undrained shear strength of a cemented marine clay from the East coast of India. The undrained shear strength of Indian coastal marine clay has been established from a detailed shear testing carried out in three phases. Undisturbed soil samples taken out from the seabed were used in the test. In the first part, a comprehensive monotonic shear testing has been carried out under both stress-controlled and strain rate-controlled conditions. In the second phase on identical soil specimen, undrained cyclic shear tests were carried out at various cyclic stress ratios (CSR) and these stress levels are chosen in such a way so that no failure occurred during testing. In the final phase post cyclic monotonic shear testing was conducted to qualitatively evaluate the damage caused by cyclic loading. The monotonic shear test results bring out the influence of cementation that can be detected by the stress-controlled test. The cyclic stress results are analysed in terms of CSR. Further, the results are correlated in terms of stress path.  相似文献   

17.
This paper presents an investigation of the long-term consolidation and strength behavior with fly ash as an additive in improving soft marine clay in Wando, Korea. 0%, 5%, 10%, 20% and 25% of the soil was replaced with fly ash. Consolidation tests were performed as incremental loaded tests. In addition, unconfined compressive strength were determined after 1, 14, 28 and 90 days. A series of forty-two long-term consolidation tests that lasted for 60 days under the constant loading were also conducted. Creep settlements of the blends decreased significantly with an increase in fly ash content. The shear strength properties increased with an increase in fly ash content. Statistical evaluation reveals an excellent correlation between the measured and predicted undrained shear strengths.  相似文献   

18.
This study investigated how leaching affects compressibility behavior of marine clay and its strain rate dependency based on laboratory tests using three pairs of specimens. Each pair of specimens consisted of leached and unleached samples with identical geotechnical properties except soil salinity. The behavior characteristics of the leached and unleached specimens were evaluated using several series of constant rate-of-strain (CRS) tests with differing strain rates. The results revealed that the compressibility of leached clay increased as its salinity decreased. However, void ratio, Atterberg limits, and preconsolidation pressure in leached samples were lower than those in unleached clay. The increased compressibility and decreased preconsolidation pressure may be induced from a weakening of the interparticle bonds in the leached soil skeleton. The CRS test results with differing strain rates revealed that higher strain rates corresponded with higher levels of effective stress and higher apparent preconsolidation pressure in both leached and unleached clays.  相似文献   

19.
The soil resistance developed during temperature- and pressure-induced large lateral movements of shallowly embedded subsea flowlines is an important input parameter for the structural design process. A major source of uncertainty in calculation of the soil resistance is the undrained shear strength of the soil berm produced as the flowline moves across the seabed, which is affected by the level of remoulding. To investigate the effect of pipeline embedment and displacement amplitude on the shear strength of the berm, a set of centrifuge model tests was conducted on kaolin clay, involving laterally moving pipelines with constant embedments in the range 5%–35% of the pipe diameter. Back-analysis of the test results, using finite element limit analysis, showed that the shear strength of the soil berm is a function of pipe displacement amplitude, pipe embedment, and soil sensitivity. On the basis of these results, we propose that the overall berm undrained shear strength may be determined as a convolution of the shear strengths of its constituent soil elements. Finally, a formula is presented for calculating the shear strength of soil elements within the soil berm, and this is used to back-analyse the overall soil berm resistance from the model tests.  相似文献   

20.
A testing program was initiated to determine the stress-strain and strength behavior of two very different marine sands (a calcareous sediment from South Australia and a siliceous sediment from the United Kingdom) at elevated confining pressures. The testing matrix consisted of a series of isotropically consolidated, undrained (CIU) and drained (CID), triaxial compression tests on samples of naturally deposited calcareous and siliceous sediment and remolded calcareous sediment. It was found that the calcareous samples displayed little cemented behavior during shear. For tests conducted at pressures up to 1.5 MPa, a significant amount of particle crushing occurred in the calcareous samples but not in the siliceous samples. Particle degradation and reorientation facilitates transitions from dilative to contractive behavior with increases in confining stress. The calcareous sediment exhibited contractive behavior at confining pressures above approximately 500 kPa and the siliceous sediment remained dilative at stresses up to 1 MPa during undrained loading. Comparison with data collected by the University of Sydney (CID tests with confining pressures up to 60 MPa) showed that most of the variations in strength behavior occurred within the low stress range (up to 2 MPa) tests conducted at URI. This was evident in the friction angle data and in the reloading Young's modulus data.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号