首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Part of Merhülietsa colony of Kohima town and the national highway passing through it was devastated by a landslide on May 13, 2007. This unstable zone affected by rotational failure lies in the Disang sediments comprising shale with intercalations between thin-bedded siltstone and fine-grained sandstone. The shales are sheared, crumpled, and weathered to a high degree. This is attributed to a strike-slip fault and two shear fractures. Geotechnical analysis was carried out in the area and a factor of safety of 0.60 obtained for the slide mass. Similar work is extended to the surrounding area which had developed tension fractures. A slip circle drawn from tension cracks helps define future failure planes. A factor of safety of 0.93 is obtained indicating the possibility of progression of the slide zone. Rock mass rating of the shales surrounding the slide zone indicates poor rock condition, pointing to danger of collapse with further progression of the slide zone.  相似文献   

2.
《Geodinamica Acta》2013,26(3-4):317-331
The Küçük Menderes Graben (KMG) is part of the horst-graben system of southwestern Anatolia (Turkey), bounded by the Bozda? horst in the north and the Ayd?n horst in the south. The Plio-Quaternary evolution of the KMG has been evaluated using the nature of the Miocene-Quaternary fill sediments and palaeostress analysis of slip data measured in different parts of the graben.

The graben is composed of five subbasins—the Kiraz, Ödemi?, Bay?nd?r, Da?k?z?lca-Torbal? and Selçuk—that are connected to each other through narrow Quaternary troughs. The Da?k?z?lca, Kiraz and Selçuk basins bear Miocene and younger sequences whereas the other subbasins are largely filled by Quaternary sediments. The maximum thickness of the Quaternary fill reaches about 270 m in the Ödemi? and Bay?nd?r subbasins.

The calculated slip results indicate multidirectional extension, three successive deformational periods, and possible counterclockwise rotation in the KMG during the post-Miocene period. The first phase was a strike-slip regime under N-S compression, followed by a second phase of deformation which resulted in ENE-WSW extension with strike-slip components. The final phase of deformation was NE-SW extension which constituted the final evolution of the KMG.

The graben gained its present morphological configuration via the onset of E-W-trending, high-angle normal faulting imposed on the regionwide synformal structure during the Plio-Quaternary. The KMG evolved as a result of rifting during the Plio-Quaternary which followed Late Miocene unroofing of the Menderes Massif and the evolution of the Büyük Menderes and Gediz grabens.  相似文献   

3.
The mineralogy of the Istala deposit, Gümüşhane, northeastern Turkey, was studied in detail, and a geochemical investigation was carried out using electron probe micro-analysis (EPMA). Sphalerite, galena, chalcopyrite and pyrite are the major sulfide minerals found in the Istala deposit, with minor amounts of bornite, idaite, tetrahedrite–tennantite, anilite, yarrowite, mckinstryite, covellite and chalcocite. In addition to these, barite and a small quantity of quartz occur as gangue minerals. Based on the textural relations and mineral assemblages, five different stages of crystallization have been recognized. Mineral paragenesis of the first four stages has been found to be similar, whereas clear enrichment has been observed in the modal abundance of the copper sulfide mineral assemblage at the fifth-stage ore formation. Whole-rock geochemical analyses of the Istala ore show an enrichment of Ag content up to 3328 ppm. Optical observations and EPMA study indicated that abundant silver mineralization was found in the Istala ore, especially during the later-stage ore deposition. Repetition to the presence of native silver in the samples, a significant amount of silver was incorporated in bornite, idaite, tetrahedrite–tennantite, anilite, yarrowite, mckinstryite, covellite and chalcocite, whereas a trace amount of silver has been detected in sphalerite, galena, chalcopyrite and pyrite. The homogenization temperatures (Th) of the primary fluid inclusions were measured between 98 and 284 °C, with frequency peaks around 140 °C, 190 °C and 240 °C. All data obtained support the theory that later stage copper-rich sulfides, formed under the low temperature conditions, are responsible for the large amounts of silver content in the Istala mine.  相似文献   

4.
Volcanic activity in the Ayas-Güdül-Celtikci region began by Oligocene (?)-early Miocene time and persisted until the end of early Pliocene time. It commenced with andesitic breccias and lavas at the base of the series and evolved through the deposition of ignimbritic and laharic volcanic material toward intermediate levels of the succession. Caldera formation followed this period of volcanic activity. Ephemeral lakes covering the region caused the subaqueous extrusion of the latest lavas during this period of activity. Afterward, limnic and fluvial sedimentation Occurred in the region during a period of volcanic quiescence. This mid-late Miocene deposition was followed by new basaltic activity. The volcanism was controlled by conjugate fault sets, N45W and N15E, representing pure-shear stress in a N20W direction, from the late Oligocene to the end of the early Pliocene. Normal dip-slip faults having a N55E trend were created by local N25W tension, presumably because of the North Anatolian fault, after early Pliocene time.  相似文献   

5.
《Quaternary Science Reviews》1999,18(4-5):549-554
The Gediz and the Büyük Menderes Graben basins, two of the most important structural elements of western Anatolia, markedly differ in their palaeogeographic evolution during the Holocene. On the basis of the study of the facies and the geomorphological characteristics of the youngest sedimentary fills it is suggested that the evolution of the Büyük Menderes basin has a simple progradational history while the Gediz River basin has shown a complex evolution mainly controlled by intense tectonic periods. Comparison between the palaeogeographic evolution of these basins points to the fact that tectonism has been more effective in the Gediz basin during the Holocene.  相似文献   

6.
Küçük Menderes River forms a rich coastal wetland inside in the Selçuk plain. Three saline/brackish lakes, one swamp and Küçük Menderes River are these wetlands’ components. Alkaline-slightly alkaline type lakes are recharged from precipitation and karstic springs that discharge from marble-schist and marble-alluvium contacts in the northern and southern parts of the study area. Water types of the wetland are Na–Cl and Na–Ca–Mg–HCO3–Cl in both rainy and dry seasons. Both seawater intrusion and evaporation, as being the sources of the ions, justify the presence of Na–Cl, Na–SO4 and Cl–SO4, in the wetland water. Environmental isotopes were used to identify the relationship between wetland and groundwater in the Selçuk plain. The δ18O and δD composition of wetland area samples have changed between ?6.42 to ?4.56‰, and ?36.40 to ?23.80‰, respectively. The lakes and rivers are plotted on the mixing line by slope of 5.2 and these data indicate that wetland is affected from seawater intrusion. The recharge area that was sampled in order to compare the wetland has Ca–HCO3 water type with a neutral-slightly alkaline pH values and the main hydrogeochemical process is weathering the different types of silicates. Iron, manganese and selenium are the dominant minor ions due to the high biological activities and organic matters in the lakes. There are two contamination risks for this wetland: (1) waste disposal site and (2) water treatment plant where the purified waters are released into the river. EC, Al, As, Cd, Cu, Fe and Zn values exceed those of aquatic life standards. In the near future these sites will pose a danger for wetland wild life and surrounding irrigation water suppliers.  相似文献   

7.
Rock fall is a common natural hazard causing significant damage to infrastructure and loss of life and property. This paper describes selection of prevention method, construction processes and the results of a rockfall hazard assessment for the village of Sarica (Gürün region, Turkey) based on an engineering-geological model. The study area is located on the lower parts of an area with very steep cliffs and 40-500 slopes with fractured sedimentary and volcanic rocks. Detailed studies have been conducted in the region to prevent the risk of any rockfalls. Maps and charts are prepared including the rock blocks that are likely to fall and the related housing area under the risk. It was found that block sizes reached 3 m3. Rockfall analyses were performed along the selected profiles using the Rocfall V.5.0 software. Kinetic energy, bounce height, horizontal location of rock end-points and velocity of the rocks along each section were evaluated separately for each profile. This data was used to select design and construction of rockfall preventing system. In this study professional type rock fall barrier (catchment fence) was used. This method was chosen because it was cheaper, more practical and reliable than others.  相似文献   

8.
  相似文献   

9.
K-Ar ages of illite-muscovite and fission track ages of zircon and apatite were determined from various lithotypes of the Bükkium, which forms the innermost segment of the Western Carpathians. The stratigraphic ages of these Dinaric type formations cover a wide range from the Late Ordovician up to the Late Jurassic. The grade of the orogenic dynamo-thermal metamorphism varies from the late diagenetic zone through the anchizone up to the epizone (chlorite, maximally biotite isograd of the greenschist facies). The K-Ar system of the illite-muscovite in the < 2 m grain-size fraction approached equilibrium only in epizonal and high-temperature anchizonal conditions. The orogenic metamorphism culminated between the eo-Hellenic (160-120 Ma) phase connected to the beginning of the subduction in the Dinarides, and the Austrian (100-95 Ma) phase characterized by compressional crustal thickening. No isotope geochronological evidence was found for proving any Hercynian recrystallization. The stability field of fission tracks in zircon was approached using the thermal histories of the different tectonic units. A temperature less than 250°C and effective heating time of 20–30 Ma had only negligible effects on the tracks, whereas total annealing was reached between 250 and 300°C. Apatite fission track ages from the Paleozoic and Mesozoic formations show that the uplift of the Bükk Mountains occurred only in the Tertiary (not earlier than ca. 40 Ma ago). Thermal modeling based on apatite fission track length spectra and preserved Paleogene sediment thickness data proved that the Late Neogene burial of the recently exhumed plateau of the Bükk Mountains exceeded 1 km.  相似文献   

10.
High-resolution seismic data shed light on latest Pleistocene and Holocene sedimentation beneath the Büyükçekmece Bay, northern shelf area of the Marmara Sea, Turkey. Discontinuous fluvio-marine and marine deposits overlying the erosional truncation surface of Oligocene–Lower Miocene deposits are as thick as 30 m and preserved preferentially within the incised valleys that were controlled by some old faults. A series of prograding shoreline, laterally passing to the latest Pleistocene–Holocene valley-fill deposits, are thought to have accumulated mainly during times of shoreline transgression and sea-level rise. The overall morphology and stratigraphic setting observed in the Büyükçekmece Bay and at the southern outlet of the Bosphorus Strait have nearly same characteristics, implying that similar hydrodynamic conditions, erosional and depositional processes were mainly under the control of strong northerly flows during the Late Quaternary. These flows were less powerful in the Büyükçekmece region with decreased sediment input and smaller accommodation space.  相似文献   

11.
The region of Malung and Chutsing was first visited by V. K.Ting as far back as 1914. Besides reconnaissance mapping a considerablenumber of fossils were collected. These were sent to C. D. Walcott ofthe Smithsonian Institution, who, together with Kirk, McEwan and  相似文献   

12.
This paper covers the investigation of construction materials and selection of the dam type for the Büyük Karaçay Dam, which was planned to be constructed on Büyük Karaçay River 20 km to the SW of Hatay (Southern Turkey). The purposes of the dam are irrigation, domestic water supply, and producing energy. Auxiliary structures locations have been determined during the study of detailed geological maps of the dam axis and reservoir area. Quality, quantity and hauling distance of natural construction materials were effective to select different dam types. For engineering geological studies exploration boreholes were drilled at the dam site; pressuremeter tests were performed in order to determine bearing capacity and elasticity properties of rocks; pressured water tests were also performed to determine permeability of the dam site. Moreover, physical and mechanical properties of rocks were determined by the laboratory test. In the feasibility stage, the dam type was chosen as the central core rock-fill dam, depending on state of natural construction materials. In design stage dam type was changed as faced symmetrical hardfill dam. Finally, the dam type was revised again during the design stage as concrete face rockfill dam.  相似文献   

13.
In this study, natural and artificial radionuclide activity concentrations in surface soils of Kücük Menderes Basin have been measured using gamma spectroscopy. The soil samples were collected from agricultural lands in the Kücük Menderes Basin in Turkey. The activity concentrations of 226Ra, 232Th, 40K and 137Cs in the soils were found to be range of 12.63 ± 2.28–72.51 ± 11.23, 11.45 ± 2.4–58.12 ± 4.76, 234.8 ± 14.85–1058.52 ± 24 Bq kg?1 dw and 2.31 ± 0.18–7.75 ± 1.14 Bq kg?1, respectively. The natural gamma radioactivity of the terrestrial radionuclides in soil samples and the gamma absorbed dose rate, the annual effective dose equivalent, the radium equivalent activity, the external hazard index, were calculated and compared with the international recommended values.  相似文献   

14.
Groundwater is often the only water source in semi-arid regions of Turkey. Günyüzü Basin, located in the Sakarya River basin, SW of Eskişehir, exhibits semi-arid conditions. The study area is composed of Paleozoic metamorphic rocks, Eocene granitic rocks, Neogene sedimentary rocks, and Quaternary alluvium. In the basin, Paleozoic Marbles are the main reservoir rocks for hot and cold water, bordered by impermeable diabases dykes at the sides and by impermeable granites and schists. Neogene-aged limestones, conglomerates and alluvium represent the other significant aquifers. Water samples chosen to exemplify the aquifer characteristics, were collected from springs and wells in both the dry and the wet seasons. The cation and anion permutation of the samples show that carbonates are the dominant lithology in the formation of chemical composition. δ18O (−11.2 to −8.9‰) and δ2H (−79 to −60‰) isotopic values show that all waters (thermal and cold) are meteoric in origin. The hydrological, hydrochemical, and isotopic properties of the waters reveal that there exist two main groups of groundwater systems; one of these is deep circulating, while the other one is shallow. Tritium values, 0–4 TU (Tritium Unit) indicate the presence of old, static water in these aquifer systems.  相似文献   

15.
This work analyzes various morphometric characteristics of the Colangüil river basin in order to evaluate flash flood hazards. Such high-water events pose a risk to the similarly named small village located at the basin’s foot area. For this purpose, the basin is divided into seven sub-basins and some basic measurements (surface, perimeter, basin length, river beds, elevations and slope of the main river bed, and of a number of minor river beds) are calculated. These measurements permit to predict approximately the behavior of the basin in the presence of a series of theoretical rainstorms that may generate unusual runoff volumes that make up such flash floods.  相似文献   

16.
Reconnaissance observations are presented on the building damage caused by the May 19, 2011, Kütahya–Simav earthquake in Western Turkey as well as an overview of strong ground motion data recorded during the earthquake is given. According to Disaster and Emergency Management Presidency of Turkey, the magnitude of the earthquake is 5.7 in local magnitude scale. Although the earthquake can be regarded as a moderate event when considering its magnitude and strong motion recordings, it caused excessive structural damage to buildings in Simav district and several villages in the near vicinity. During the field investigation, different types of structural damage were observed mainly in the reinforced concrete frame buildings with infill walls and masonry buildings with various types of construction materials. Observed damage resulted from several deficiencies in structural and non-structural components of the buildings. Poor construction materials and workmanship, non-conforming earthquake-resistant design and construction techniques and non-ductile detailing are the main reasons for such an extensive damage, as observed in many past earthquakes in Turkey.  相似文献   

17.
The fossil forest in the Çaml?dere-Çeltikçi-Güdül region of the province of Ankara in Turkey has a large number of petrified coniferous and oak tree remains. Petrification occurred in volcanic ashes and tuffs with permineralization, and Fe, Mg, Ca and Ni ions played important roles in the substitution of Si for C. However, the petrified wood samples are heterogeneous in colouration, weight, toughness, and durability, despite being obtained from the same source. Those features are very important for end-users because petrified woods, if cut and polished, are used widely as both decorative indoor tiles and gemstone objects, but heterogeneous materials suffer large wastage while they are being worked and used.Chemical analyses, specific gravity measurements, polarizing microscope studies, X-ray diffraction patterns, and scanning electron image evaluations were performed to classify and identify the homogenous material of the petrified woods relating to its physical and mineralogical characteristics.The different characteristics of the petrified wood samples are due to their varying inner structures, which depend on the replacement silica-building phases and their ratios, and silica particle sizes. Thin sections and XRD patterns revealed that petrified woods in the region were silicified by replacement with both chalcedonic quartz components, including chalcedony (length-fast quartz), moganite and orthorhombic-silica (length-slow quartz), and opalline quartz components including opal-CT and opal-C (length-slow quartz). The scanning electron microscope images were shown that the internal structures of the petrified woods consist of mostly submicron-sized (100–800 nm), and partially nano-sized (60–120 nm) silica-building particles.So, the petrified wood samples can be firstly classified into five main-groups based on their colourations and specific gravity values, then, into three sub-groups based on the principal chalcedonic and opalline quartz silica-building phases and related particle sizes, and also weighing, toughness, and durability. In the first group (samples 1, 2, and 3), the crystallinity gradation of the petrified woods can be classified as quasi-coarse crystalline because they include mainly chalcedony and moganite phases with 800–200 nm ranging in particle size. They are heavy, tough, and resistance as a material, as shown by specific gravity values of 2.60, 2.56, and 2.54, respectively. In the second group (sample 4), the crystallinity gradation of the petrified wood can be classified as quasi-fine crystalline because it includes mainly o-silica and moganite phases with 400–100 nm ranging in particle size. It is medium-heavy, semi-tough and quasi-resistance as a material, as shown by a specific gravity value of 2.42. In the third group (sample 5), the crystallinity gradation of the petrified wood can be classified as quasi-nano-crystalline because it includes mainly opal-CT and opal-C phases with 120–60 nm ranging in particle size. The material is slight, brittle, and weak as a material, as shown by a specific gravity value of 2.18.Ultimately, in the petrified wood found in the Çaml?dere-Çeltikçi-Güdül region of Ankara province in Turkey, it is revealed that samples 1, 2, and 3 represent flint and chalcedony quartz mineral species, samples 4 and 5 represent chalcedony and opal quartz mineral species.  相似文献   

18.
Ⅰ.INTRODUCTION Diatomaceous earth is known to occur in the vicinity of Shanwang,(Long.118°34'E,Lat.36°32'N)Linchü district,Shantung.The sitewhich has furnished the material discussed in this report,lies 2 li and  相似文献   

19.
The Pingüino deposit, located in the low sulfidation epithermal metallogenetical province of the Deseado Massif, Patagonia, Argentina, represents a distinct deposit type in the region. It evolved through two different mineralization events: an early In-bearing polymetallic event that introduced In, Zn, Pb, Ag, Cd, Au, As, Cu, Sn, W and Bi represented by complex sulfide mineralogy, and a late Ag–Au quartz-rich vein type that crosscut and overprints the early polymetallic mineralization. The indium-bearing polymetallic mineralization developed in three stages: an early Cu–Au–In–As–Sn–W–Bi stage (Ps1), a Zn–Pb–Ag–In–Cd–Sb stage (Ps2) and a late Zn–In–Cd (Ps3). Indium concentrations in the polymetallic veins show a wide range (3.4 to 1,184 ppm In). The highest indium values (up to 1,184 ppm) relate to the Ps2 mineralization stage, and are associated with Fe-rich sphalerites, although significant In enrichment (up to 159 ppm) is also present in the Ps1 paragenesis associated with Sn-minerals (ferrokesterite and cassiterite). The hydrothermal alteration associated with the polymetallic mineralization is characterized by advanced argillic alteration within the immediate vein zone, and sericitic alteration enveloping the vein zone. Fluid inclusion studies indicate homogenisation temperatures of 308.2–327°C for Ps1 and 255–312.4°C for Ps2, and low to moderate salinities (2 to 5 eq.wt.% NaCl and 4 to 9 eq.wt.% NaCl, respectively). δ34S values of sulfide minerals (+0.76‰ to +3.61‰) indicate a possible magmatic source for the sulfur in the polymetallic mineralization while Pb isotope ratios for the sulfides and magmatic rocks (206Pb/204Pb, 207Pb/204Pb and 208Pb/204Pb ratios of 17.379 to 18.502; 15.588 to 15.730 and 38.234 to 38.756, respectively) are consistent with the possibility that the Pb reservoirs for both had the same crustal source. Spatial relationships, hydrothermal alteration styles, S and Pb isotopic data suggest a probable genetic relation between the polymetallic mineralization and dioritic intrusions that could have been the source of metals and hydrothermal fluids. Mineralization paragenesis, alteration mineralogy, geochemical signatures, fluid inclusion data and isotopic data, confirm that the In-bearing polymetallic mineralization from Pingüino deposit is a distinct type, in comparison with the well-known epithermal low sulfidation mineralization from the Deseado Massif.  相似文献   

20.
Ohne ZusammenfassungMeinem hochverehrten Lehrer, Herrn Professor Dr.Paul Ramdohr, zum 65. Geburtstag gewidmet.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号