共查询到20条相似文献，搜索用时 31 毫秒
1.
The stability of yttrium-acetate (Y-Ac) complexes in aqueous solution was determined potentiometrically at temperatures 25-175 °C (at Ps) and pressures 1-1000 bar (at 25 and 75 °C). Measurements were performed using glass H+-selective electrodes in potentiometric cells with a liquid junction. The species YAc2+ and were found to dominate yttrium aqueous speciation in experimental solutions at 25-100 °C (log [Ac−] < −1.5, pH < 5.2), whereas at 125, 150 and 175 °C introduction of into the Y-Ac speciation model was necessary. The overall stability constants βn were determined for the reaction
2.
The solubility of ZnS(cr) was measured at 100 °C, 150 bars in sulfide solutions as a function of sulfur concentration (m(Stotal) = 0.02-0.15) and acidity (pHt = 2-11). The experiments were conducted using a Ti flow-through hydrothermal reactor enabling the sampling of large volumes of solutions at experimental conditions, with the subsequent concentration and determination of trace quantities of Zn. Prior to the experiments, a long-term in situ conditioning of the solid phase was performed in order to attain the reproducible Zn concentrations (i.e. solubilities). The ZnS(cr) solubility product was monitored in the course of the experiment. The following species were found to account for Zn speciation in solution: Zn2+ (pHt < 3), (pHt 3-4.5), (pHt 5-8), and ZnS(HS)− (pHt > 8) (pHt predominance regions are given for m(Stotal) = 0.1). Solubility data collected in this study at pHt > 3 were combined with the ZnS(cr) solubility product determined at lower pH to yield the following equilibrium constants (t = 100 °C, P = 150 bars):
3.
Robert H. Byrne 《Geochimica et cosmochimica acta》2010,74(15):4312-5647
Comparative concentrations of carbonate and hydroxide complexes in natural solutions can be expressed in terms of reactions with bicarbonate that have no explicit pH dependence (). Stability constants for this reaction with n = 1 were determined using conventional formation constant data expressed in terms of hydroxide and carbonate. Available data indicate that stability constants appropriate to seawater at 25 °C expressed in the form are on the order of 104.2 for a wide range of cations (Mz+) with z = +1, +2 and +3. Φ1 is sufficiently large that species appear to substantially dominate MOHz−1 species in seawater. Evaluations of comparative stepwise carbonate and hydroxide stability constant behavior leading to the formation of n = 2 and n = 3 complexes suggest that carbonate complexes generally dominate hydroxide complexes in seawater, even for cations whose inorganic speciation schemes in seawater are currently presumed to be strongly dominated by hydrolyzed forms (). Calculated stability constants, and , indicate that the importance of carbonate complexation is sufficiently large that carbonate and hydroxide complexes would be generally comparable even if calculated Φ2 and Φ3 values are overestimated by two or more orders of magnitude. Inclusion of mixed ligand species in carbonate-hydroxide speciation models allows cation complexation intensities (MT/[Mz+]) to be expressed in the following form:
4.
Partitioning of strontium during spontaneous calcite formation was experimentally studied using an advanced CO2-diffusion technique. Results at different precipitation rates and T = 5, 25, and 40 °C show that at constant temperature Sr incorporation into calcite is controlled by the precipitation rate (R in μmol/m2/h) according to the individual expressions
5.
H. Gailhanou J.C. van Miltenburg J. Olives E.C. Gaucher 《Geochimica et cosmochimica acta》2007,71(22):5463-5473
The heat capacities of the anhydrous international reference clay minerals, smectite MX-80, illite IMt-2 and mixed-layer illite-smectite ISCz-1, were measured by low temperature adiabatic calorimetry and differential scanning calorimetry, from 6 to 520 K (at 1 bar). The samples were chemically purified and Na-saturated. Dehydrated clay fractions <2 μm were studied. The structural formulae of the corresponding clay minerals, obtained after subtracting the remaining impurities, are K0.026Na0.435Ca0.010(Si3.612Al0.388) (Al1.593Mg0.228Ti0.011)O10(OH)2 for smectite MX-80, K0.762Na0.044(Si3.387Al0.613) (Al1.427Mg0.241O10(OH)2 for illite IMt-2 and K0.530Na0.135(Si3.565Al0.435)(Al1.709Mg0.218Ti0.005)O10(OH)2for mixed-layer ISCz-1. From the heat capacity values, we determined the molar entropies, standard entropies of formation and heat contents of these minerals. The following values were obtained at 298.15 K and 1 bar:
(J mol−1 K−1) S0 (J mol−1 K−1) Smectite MX-80 326.13 ± 0.10 280.56 ± 0.16 Illite IMt-2 328.21 ± 0.10 295.05 ± 0.17 Mixed-layer ISCz-1 320.79 ± 0.10 281.62 ± 0.15 - Full-size table
6.
Emilie Pourtier Jean-Luc Devidal François Gibert 《Geochimica et cosmochimica acta》2010,74(6):1872-66
The solubility of synthetic NdPO4 monazite end-member was experimentally determined from 300 up to 800 °C, at 2000 bars in pure water, and in aqueous chloride or phosphate solutions. Both the classical weight-loss method and a new method based on isotope dilution coupled with thermal ionization mass spectrometer were used. In the range of temperature studied monazite showed a prograde solubility from 10−5.4 m at 300 °C up to 10−2.57 m at 800 °C. Experiments in H2O-H3PO4-NaCl-HCl solutions suggested Nd(OH)30 was the major species that was formed at high temperature and pressure. The equilibrium constants (log K) for the reaction:
7.
Synthesis, characterization and thermochemistry of a Pb-jarosite 总被引：1，自引：0，他引：1
F.L. Forray A.M.L. Smith A. Navrotsky K. Wright W.E. Dubbin 《Geochimica et cosmochimica acta》2010,74(1):215-224
The enthalpy of formation from the elements of a well-characterized synthetic Pb-jarosite sample corresponding to the chemical formula (H3O)0.74Pb0.13Fe2.92(SO4)2(OH)5.76(H2O)0.24 was measured by high temperature oxide melt solution calorimetry. This value ( = −3695.9 ± 9.7 kJ/mol) is the first direct measurement of the heat of formation for a lead-containing jarosite. Comparison to the thermochemical properties of hydronium jarosite and plumbojarosite end-members strongly suggests the existence of a negative enthalpy of mixing possibly related to the nonrandom distribution of Pb2+ ions within the jarosite structure. Based on these considerations, the following thermodynamic data are proposed as the recommended values for the enthalpy of formation from the elements of the ideal stoichiometric plumbojarosite Pb0.5Fe3(SO4)2(OH)6: = −3118.1 ± 4.6 kJ/mol, = −3603.6 ± 4.6 kJ/mol and S° = 376.6 ± 4.5 J/(mol K). These data should prove helpful for the calculation of phase diagrams of the Pb-Fe-SO4-H2O system and for estimating the solubility product of pure plumbojarosite. For illustration, the evolution of the estimated solubility product of ideal plumbojarosite as a function of temperature in the range 5-45 °C was computed (Log(Ksp) ranging from −24.3 to −26.2). An Eh-pH diagram is also presented. 相似文献
8.
Andrei V. Sharygin Robert H. Wood Victor N. Balashov 《Geochimica et cosmochimica acta》2006,70(20):5169-5182
The electrical conductivities of aqueous solutions of Li2SO4 and K2SO4 have been measured at 523-673 K at 20-29 MPa in dilute solutions for molalities up to 2 × 10−2 mol kg−1. These conductivities have been fitted to the conductance equation of Turq, Blum, Bernard, and Kunz with a consensus mixing rule and mean spherical approximation activity coefficients. In the temperature interval 523-653 K, where the dielectric constant, ε, is greater than 14, the electrical conductance data can be fitted by a solution model which includes ion association to form , , and , where M is Li or K. The adjustable parameters of this model are the first and second dissociation constants of the M2SO4. For the 673 K and 300 kg m−3 state point where the Coulomb interactions are the strongest (dielectric constant, ε = 5), models with more extensive association give good fits to the data. In the case of the Li2SO4 model, including the multi-ion associate, , gave an extremely good fit to the conductance data. 相似文献
9.
Ammoniojarosite [(NH4,H3O)Fe3(OH)6(SO4)2], a poorly soluble basic ferric sulfate, was produced by microbiological oxidation of ferrous sulfate at pH 2.0-3.0 over a range of concentrations (5.4-805 mM) and temperatures (22-65 °C). Ammoniojarosites were also produced by chemical (abiotic) procedures in parallel thermal (36-95 °C) experiments. At 36 °C, schwertmannite [ideally Fe8O8(OH)6(SO4)] was the only solid product formed at <10 mM concentrations. Between 11.5 and 85.4 mM , a mixed product of ammoniojarosite and schwertmannite precipitated, as identified by X-ray diffraction. In excess of 165 mM , ammoniojarosite was the only solid phase produced. An increase in the incubation temperature using thermoacidophiles at 45 and 65 °C accelerated the formation of ammoniojarosite in culture solutions containing 165 mM . Both the biogenic and chemical ammoniojarosites were yellow (2Y-4Y in Munsell hue), low surface area (<1 m2/g), well crystalline materials with average co and ao unit cell parameters of 17.467 ± 0.048 Å and 7.330 ± 0.006 Å, respectively. Strong positive correlations were observed between unit cell axial ratios (co/ao) and increasing synthesis temperature in both biotic and abiotic systems. All samples were N deficient compared to stoichiometric ammoniojarosite, and both chemical and X-ray data indicated partial replacement of by H3O+ to form solid solutions with 0.14-0.24 mole H3O+ per formula unit. The morphology of the biogenic jarosites included aggregated discs, pseudo-cubic crystals and botryoidal particles, whereas the chemical specimens prepared at 36-95 °C were composed of irregular crystals with angular edges. Morphological information may thus be useful to evaluate environmental parameters and mode of formation. The data may also have application in predicting phase boundary conditions for Fe(III) precipitation in biogeochemical processes and treatment systems involving acid sulfate waters. 相似文献
10.
Fabrice Fraysse Oleg S. Pokrovsky Jacques Schott 《Geochimica et cosmochimica acta》2006,70(8):1939-1951
Although phytoliths, constituted mainly by micrometric opal, exhibit an important control on silicon cycle in superficial continental environments, their thermodynamic properties and reactivity in aqueous solution are still poorly known. In this work, we determined the solubility and dissolution rates of bamboo phytoliths collected in the Réunion Island and characterized their surface properties via electrophoretic measurements and potentiometric titrations in a wide range of pH. The solubility product of “soil” phytoliths ( at 25 °C) is equal to that of vitreous silica and is 17 times higher than that of quartz. Similarly, the enthalpy of phytoliths dissolution reaction is close to that of amorphous silica but is significantly lower than the enthalpy of quartz dissolution. Electrophoretic measurements yield isoelectric point pHIEP = 1.2 ± 0.1 and 2.5 ± 0.2 for “soil” (native) and “heated” (450 °C heating to remove organic matter) phytoliths, respectively. Surface acid-base titrations allowed generation of a 2-pK surface complexation model. Phytoliths dissolution rates, measured in mixed-flow reactors at far from equilibrium conditions at 2 ? pH ? 12, were found to be intermediate between those of quartz and vitreous silica. The dissolution rate dependence on pH was modeled within the concept of surface coordination theory using the equation:
11.
Steady-state magnesite dissolution rates were measured in mixed-flow reactors at 150 and 200 °C and 4.6 < pH < 8.4, as a function of ionic strength (0.001 M ? I ? 1 M), total dissolved carbonate concentration (10−4 M < ΣCO2 < 0.1 M), and distance from equilibrium. Rates were found to increase with increasing ionic strength, but decrease with increasing temperature from 150 to 200 °C, pH, and aqueous CO32− activity. Measured rates were interpreted using the surface complexation model developed by Pokrovsky et al. (1999a) in conjunction with transition state theory (Eyring, 1935). Within this formalism, magnesite dissolution rates are found to be consistent with
12.
13.
E. Bruce Watson Daniele J. Cherniak Elizabeth A. Frank 《Geochimica et cosmochimica acta》2009,73(16):4792-5705
Self-diffusion of sulfur in pyrite (FeS2) was characterized over the temperature range ∼500-725 °C (∼1 bar pressure) by immersing natural specimens in a bath of molten elemental 34S and characterizing the resulting diffusive-exchange profiles by Rutherford backscattering spectroscopy (RBS). The temperature dependence of the sulfur diffusivity (DS) conforms to DS = Do exp(−Ea/RT), where the pre-exponential constant (Do) and the activation energy (Ea) are constrained as follows:
14.
Thomas Driesner 《Geochimica et cosmochimica acta》2007,71(20):4902-4919
A set of correlations for the volumetric properties and enthalpies of phases in the system H2O-NaCl as a function of temperature, pressure, and composition has been developed that yields accurate values from 0 to 1000 °C, 1 to 5000 bar, and 0 to 1 XNaCl. The volumetric properties of all fluid phases from low-density vapor to hydrous salt melts and single-phase binary fluids at high pressures and temperatures, can be described by a simple equation
15.
Porphyry-type ore deposits sometimes contain fluid inclusion compositions consistent with the partitioning of copper and gold into vapor relative to coexisting brine at the depositional stage. However, this has not been reproduced experimentally at magmatic conditions. In an attempt to determine the conditions under which copper and gold may partition preferentially into vapor relative to brine at temperatures above the solidus of granitic magmas, we performed experiments at 800 °C, 100 MPa, oxygen fugacity () buffered by Ni-NiO, and fixed at either 3.5 × 10−2 by using intermediate solid solution-pyrrhotite, or 1.2 × 10−4 by using intermediate solid solution-pyrrhotite-bornite. The coexisting vapor (∼3 wt.% NaCl eq.) and brine (∼68 wt.% NaCl eq.) were composed initially of NaCl + KCl + HCl + H2O, with starting HCl set to <1000 μg/g in the aqueous mixture. Synthetic vapor and brine fluid inclusions were trapped at run conditions and subsequently analyzed by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). Our experiments demonstrate that copper and gold partitioned strongly into the magmatic volatile phase(s) (MVP) (i.e., vapor or brine) relative to a silicate melt over the entire imposed range of . Nernst style partition coefficients between coexisting brine (b) and melt (m), Db/m (±1σ), range from 3.6(±2.2) × 101 to 4(±2) × 102 for copper and from 1.2(±0.6) × 102 to 2.4(±2.4) × 103 for gold. Partition coefficients between coexisting vapor (v) and melt, Dv/m range from 2.1 ± 0.7 to 18 ± 5 and 7(±3) × 101 to 1.6(±1.6) × 102 for copper and gold, respectively. Partition coefficients for all experiments between coexisting brine and vapor, Db/v (±1σ), range from 7(±2) to 1.0(±0.4) × 102 and 1.7(±0.2) to 15(±2) for copper and gold, respectively. Observed average Db/v at an of 1.2 × 10−4 were elevated, 95(±5) and 15 ± 1 for copper and gold, respectively, relative to those at the higher of 3.5 × 10−2 where Db/v were 10(±5) for copper and 7(±6) for gold. Thus, there is an inverse relationship between the and the Db/v for both copper and gold with increasing resulting in a decrease in the Db/v signifying increased importance of the vapor phase for copper and gold transport. This suggests that copper and gold may complex with volatile S-species as well as Cl-species at magmatic conditions, however, none of the experiments of our study at 800 °C and 100 MPa had a Db/v ? 1. We did not directly determine speciation, but infer the existence of some metal-sulfur complexes based on the reported data. We suggest that copper and gold partition preferentially into the brine in most instances at or above the wet solidus. However, in most systems, the mass of vapor is greater than the mass of brine, and vapor transport of copper and gold may become more important in the magmatic environment at higher , lower , or near the critical point in a salt-water system. A Db/v ? 1 at subsolidus hydrothermal conditions may also occur in response to changes in temperature, , , and/or acidity.Additionally, both copper and gold were observed to partition into intermediate solid solution and bornite much more strongly than into vapor, brine or silicate melt. This suggests that, although vapor and brine are both efficient at removing copper and gold from a silicate melt, the presence of Cu-Fe sulfides can sequester a substantial portion of the copper and gold contained within a silicate melt if the Cu-Fe sulfides are abundant. 相似文献
16.
Nikolay N. Akinfiev 《Geochimica et cosmochimica acta》2009,73(6):1597-1608
Knowledge of the solubility of quartz over a broad spectrum of aqueous fluid compositions and T-P conditions is essential to our understanding of water-rock interaction in the Earth’s crust. We propose an equation to compute the molality of aqueous silica, mSiO2(aq), mol·(kg H2O)−1, in equilibrium with quartz and water-salt-CO2 fluids, as follows:
17.
The composition of carbonate minerals formed in past and present oceans is assumed to be significantly controlled by temperature and seawater composition. To determine if and how temperature is kinetically responsible for the amount of Mg incorporated in calcite, we quantified the influence of temperature and specific dissolved components on the complex mechanism of calcite precipitation in seawater. A kinetic study was carried out in artificial seawater and NaCl-CaCl2 solutions, each having a total ionic strength of 0.7 M. The constant addition technique was used to maintain [Ca2+] at 10.5 mmol kg−1 while [] was varied to isolate the role of this variable on the precipitation rate of calcite.Our results show that the overall reaction of calcite precipitation in both seawater and NaCl-CaCl2 solutions is dominated by the following reaction:
18.
Forward dissolution rates of Na-Montmorillonite (Wyoming) SWy-2 smectite (Ca0.06Na0.56)[Al3.08Fe(III)0.38Mg0.54] [Si7.93 Al0.07]O20(OH)4 were measured at 25 °C in a mixed-flow reactor equipped with interior dialysis compartment (6-8 kDa membrane) as a function of pH (1-12), dissolved carbonate (0.5-10 mM), phosphate (10−5 to 0.03 M), and nine organic ligands (acetate, oxalate, citrate, EDTA, alginate, glucuronic acid, 3,4-dihydroxybenzoic acid, gluconate, and glucosamine) in the concentration range from 10−5 to 0.03 M. In organic-free solutions, the Si-based rates decrease with increasing pH at 1 ? pH ? 8 with a slope close to −0.2. At 9 ? pH ? 12, the Si-based rates increase with a slope of ∼0.3. In contrast, non-stoichiometric Mg release weakly depends on pH at 1 ? pH ? 12 and decreases with increasing pH. The empirical expression describing Si-release rates [R, mol/cm2/s] obtained in the present study at 25 °C, I = 0.01 M is given by
19.
Four or five sets of ab initio models, including Unrestricted Hartree Fock (UHF) and hybrid Density Functional Theory (DFT) are calculated for each species in a series of aqueous ferric aquo-chloro complexes: , , , FeCl3(H2O)3, FeCl3(H2O)2, , FeCl5H2O2−, , ) in order to determine the relative isotopic fractionation among the complexes, to compare the results of different models for the same complexes, to examine factors that influence the magnitude of the isotopic fractionation, and to compare bond-partner-driven fractionation with redox-driven fractionation.Relative to , all models show a nearly linear decrease in 56Fe/54Fe as the number of Cl− ions per Fe3+ ion increases, with slopes of −0.8‰ to −1.0‰ per Cl− at 20 °C. At 20 °C, 1000 ln β (β = 56Fe/54Fe reduced partition function ratio relative to a dissociated Fe atom) values range from 8.93‰ to 9.73‰ for , 8.04-9.12‰ for , 7.61-8.73‰ for , 7.14-8.25‰ for , and 3.09-4.41‰ for . The fractionation between and ranges from 1.5‰ to 2.6‰, depending on the model; this is comparable in magnitude to fractionation effects due to Fe3+/Fe2+ redox reactions. β values from the UHF models are consistently higher than those from the hybrid DFT models.Isotopic fractionation is shown to be sensitive to differences in ligand bond stiffness (above), coordination number, bond length, and the frequency of the asymmetric Fe-X stretching vibrational mode, as predicted by previous theoretical studies. Complexes with smaller coordination numbers have higher 1000 ln β (7.46‰, 5.25‰, and 3.48‰ for , ,, respectively, from the B3LYP/6-31G(d) model). Species with the same number of chlorides but fewer waters also show the effect of coordination number on 1000 ln β: (7.46‰ vs. 7.05‰ for FeCl3(H2O)2 vs. FeCl3(H2O)3 and 5.25‰ vs. 4.94‰ for vs. FeCl5H2O2− with the B3LYP/6-31G(d) model). As more Fe-Cl bonds substitute for Fe-OH2 bonds (with a resulting decrease in β), the lengths of the Fe-Cl bonds and the Fe-O bonds increase.Preliminary modeling of shows an Fe3+/Fe2+ fractionation of 3.2‰ for the B3LYP/6-31G(d) model, in agreement with previous studies. The addition of an explicit outer hydration sphere of 12 H2O molecules to models of improves agreement with measured vibrational frequencies and bond lengths; 1000 ln β increases by 0.8-1.0‰. An additional hydration sphere around increases 1000 ln β by only 0.1‰.Isotopic fractionations predicted for this simple system imply that ligands present in an aqueous iron environment are potentially important drivers of fractionation, and suggest that significant fractionation effects are likely in other aqueous systems containing sulfides or organic ligands. Fractionation effects due to both speciation and redox must be considered when interpreting iron isotope fractionations in the geological record. 相似文献
20.
The formation constants of neodymium complexes in sulfate solutions have been determined spectrophotometrically at temperatures of 30-250 °C and a pressure of 100 bars. The dominant species in the solution are NdSO4+ and Nd(SO4)2−, with the latter complex being more important at higher temperature. Equilibrium constants were calculated for the following reactions: