首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
Impact melt samples from drill hole B1-59 at the 3.8 km diameter Brent crater (Ontario) have been analysed for siderophile trace elements indicative of meteoritic contamination. Samples from the basal melt zone at 823–857 m depth are enriched in Ir, Os, Pd, Ni, Co, Cr and Se over basement, with the abundance pattern suggesting a chondritic projectile for Brent. From a Ni-Cr correlation of 10 melt samples an L or LL chondrite is inferred. The contribution of an ultramafic country rock (alnoite) in the melt is too small to significantly influence its NiCr ratio. Glass-rich breccias from the allochthonous breccias filling the crater also contain a meteoritic component. Interelement ratios (e.g. NiCr) are, however, fractionated relative to the melt zone samples. This, as well as the low Au content of all Brent samples, is probably a product of alteration.Additional data on impact melts from the 65 km diameter crater Manicouagan still did not reveal a meteoritic component, as also for the Mistastin crater (28 km diameter) where Cr analyses set an upper limit of 1% of an achondritic projectile component in the melt. Irghizites (tektite like glasses) from the Zhamanshin impact structure have been found to contain high Ni and Co concentrations, and our data show that Ir is also enriched. It is however not possible to define the projectile-type. Enrichment of an Ivory Coast tektite in Ir is confirmed. There are large differences in siderophile element concentrations among tektites, with otherwise similar chemical composition.There are now four known craters formed by chondrites (Clearwater East, Lapparjärvi, Wanapitei, and Brent), with Brent being the smallest of these. For smaller craters the projectiles appear to be limited to iron or stony-iron meteorites, because of atmospheric destruction of relatively small stony meteorites. It appears, however, that all major classes of meteorites are represented among the projectiles at terrestrial impact craters.  相似文献   

2.
Impact melt lithologies of the 77 m.y. old Finnish meteorite crater Lappajärvi as well as the Precambrian target rocks have been studied in detail, to identify and characterize different impact melt types (clast-poor, clast-rich, suevitic melt) and to study their chemical (major and trace elements) and isotopic (Rb-Sr) compositions in comparison to the composition of the target rocks.The Rb-Sr system of the whole melt body—including the suevitic melt—is shown to have been reequilibrated by the impact by extensive turbulent mixing of the various melted or vaporized target rocks. Chemical interactions (exchange of alkali elements, 87Sr-redistribution) between feldspar clasts and impact melt surrounding them are the result of thermal metamorphism following the incorporation of target rock fragments of various degrees of shock metamorphism into the superheated melt. Exchange reactions between clasts and melt are determined by thermal activation, but the degree of shock metamorphism in the clasts plays an important role, too.Major and trace element distributions in impact melt and basement rocks indicate that the Lappajärvi melt body chemically is extremely homogeneous. Even volatile elements (such as Zn and Cu) were not strongly fractionated. Comparison of the abundances of siderophile elements in the impact melt (e.g., 118–177 ppm Cr, 195–340 ppm Ni, 6–12 ppb Ir) and calculated target rock mixture (79% mica schist, 11% granite-pegmatite, 10% amphibolite) (e.g., 85.6 ppm Cr, 54.8 ppm Ni, 0.5 ppb Ir) revealed the chondritic nature (C or H chondritic) of the meteoritic projectile. Less than 2% of the meteorite can be detected in the coherent melt, whereas the suevitic melt is uncontaminated by the projectile.  相似文献   

3.
The goal of this study is to identify the type of projectile responsible for the formation of the late Precambrian Gardnos impact structure in Norway. Fifteen impactite samples, predominantly impact breccias and suevites from the central and northeastern part of the structure, were analyzed for platinum group elements (PGE) and Au using nickel-sulfide fire assay combined with inductively coupled plasma mass spectrometry (ICP-MS). Major and trace elements were measured in the same samples using X-ray fluorescence (XRF). In addition, the concentrations of siderophile elements Ni, Cr, and Co were determined by ICP-MS after acid digestion. The samples collected at the contact between suevite and the sedimentary infill yielded the highest PGE concentrations (Ir = 1.926 ng/g, Ru = 3.494 ng/g, Pt = 4.716 ng/g, Rh = 0.766 ng/g, Pd = 2.842 ng/g for GC6). The CI-normalized PGE patterns are characterized by Ru and Rh enrichments suggesting a non-chondritic impactor. Concentration plots of the different PGE display an excellent correlation (R > 0.99), indicative of a single source for the PGE enrichment. The Ni/Cr ratio of the Gardnos impactor (2.56 ± 0.20) agrees with that of chondrites (2 to 7), whereas Ir is depleted relative to Ni in this projectile (Ni/Ir ratio of 92 000 ± 8000 compared to an average Ni/Ir ratio of 23 150 ± 4250 for chondrites). There is no clear indication of selective post-depositional remobilization of the characteristic highly siderophile elements. The Ni/Ir and Cr/Ir data combined with the non-chondritic PGE ratios probably indicate a differentiated projectile. Based on (1) the similarity of the inter-element ratios of the impactor with the iron phase of non-magmatic iron meteorites and (2) the presence of characteristics of both chondrites and iron meteorites (Ni/Cr and Ni/Ir ratios), an IA or IIIC non-magmatic iron meteorite is a very plausible impactor.  相似文献   

4.
Morokweng is a large, 145 Ma impact structure in the Northwest Province of South Africa. The impact origin of this structure and its melt rock has been confirmed by ample evidence of shock metamorphism in clasts within the melt rock and samples from granitoid basement below the melt body. The age of this structure is indistinguishable from the biostratigraphic age of the Jurassic-Cretaceous (J-K) boundary. The size of Morokweng, for which diameters ranging from 70 to 165 kilometers have been quoted before, and which has important implications regarding its relation to the J-K boundary, remains an open question.Here we present new results of a detailed petrographic and chemical investigation of impact melt rock and country rock samples. The granophyric melt rock is mostly unaltered and contains a large number of gabbroic and felsic clasts. The occurrence of baddeleyite, formed from high-temperature dissociation of primary zircon, indicates a high-temperature origin. The impact melt rock body, which in the cores investigated here has a thickness of at least 120 m, shows no statistically significant variation or trend in chemical composition with depth or geographic location. Chemical data for impact melt rock, breccia dike/vein breccia samples, granite, quartzite, and basic to mafic clasts were used in harmonic least squares mixing calculations to determine the source rock types and their proportions involved in the formation of the impact melt rock. Granite is the dominant target rock component (50 to 63% by weight; depending on target composition input to the mixing models), with significant (35 to 50%) mafic contributions, and a (possible) minor contribution of quartzite. New platinum group element (Ru, Rh, Pd, Os, Ir, and Pt), Re, and Au data, as well as data for other siderophile elements (Cr, Co, Ni, and Ir), confirm the presence of up to ∼ 5% of a chondritic component in the melt rock. The indigenous contribution of the PGEs from the target rocks is negligible. Normalized PGE abundance patterns and interelement ratios of Morokweng impact melt rock indicate that the projectile was likely of ordinary chondritic (possibly L chondrite) composition, but the choice of the meteoritic compositional data influences this interpretation.  相似文献   

5.
With a diameter of ∼100 km, Popigai in Northern Siberia is the largest crater known in the Cenozoic. The concentrations in platinum group elements (PGE) were analyzed in twenty samples of homogeneous impact melt collected in the northwestern flank of the crater to identify the composition of the projectile. The method selected was preconcentration by NiS fire assay followed by inductively coupled plasma-mass spectrometry (ICP-MS). This technique measures all the PGE (except Os) and by using aliquots >10g, the results are highly reproducible. The major and trace element composition of the impact melt resembles that of gneissic lithologies of the Anabar shield, which are representative of the target rock. The PGE are enriched in the melt by factors of 3 to 14 compared to the main target lithology, but the meteoritic contamination is only around 0.2 wt.%. Using plots of elemental ratios such as Ru/Rh vs. Pt/Pd or Ru/Rh vs. Pd/Ir, the Popigai impactor is clearly identified as an ordinary chondrite and most likely l-chondrite. This study indicates that PGE elemental ratios allow discrimination of the type of impactor, even in the case of low meteoritic contamination. This study confirms that a significant fraction of the crater-forming projectiles presently documented could have an ordinary chondrite composition. Their probable source, the S-type asteroids, appears to form the majority of the bodies in the main asteroid belt and among Near Earth Objects (NEOs). The ordinary chondrite origin of the Popigai projectile supports an asteroidal origin for the late Eocene impacts as a plausible alternative to the comet shower scenario proposed by Farley et al. (1998).  相似文献   

6.
Eleven impact melt and 6 basement rock samples from 4 craters were analyzed by neutron activation for Au, Co, Cr, Fe, Ge, Ir, Ni, Os, Pd, Re and Se. Wanapitei Lake, Ontario: the impact melts show uniform enrichments corresponding to 1–2% C1-chondrite material. Interelement ratios (CoCr, NiCr, NiIr) suggest that the impacting body was a Cl-, C2-, or LL-chondrite. Nicholson Lake, North West Territory: Ni, Cr and Co are distinctly more enriched than Ir and Au which tentatively suggests an olivine-rich achondrite (nakhlite or ureilite). Gow Lake, Saskatchewan and Mistastin, Labrador: small enrichments in Ir and Ni; both the low IrNi ratios and low Cr content suggest iron meteorites, but the signals are too weak for conclusive identification.A tentative comparison of meteoritic signatures at 10 large, ≥4km craters and their presumed celestial counterparts (13 Apollo and Amor asteroids) shows more irons and achondrites among known projectile types, and a preponderance of S-type objects, having no known meteoritic equivalent, among asteroids. It is not yet clear that these differences are significant, in view of the tentative nature of the crater identifications (achondrites in particular), and the limited statistics.  相似文献   

7.
The concentrations of P, V, Cr, Fe, Co, Ni, Cu, Ga, Ge, As, Mo, Ru, Rh, Pd, W, Re, Os, Ir, Pt, and Au in the group IVB iron meteorites Cape of Good Hope, Hoba, Skookum, Santa Clara, Tawallah Valley, Tlacotepec, and Warburton Range have been measured by laser ablation inductively coupled plasma mass spectrometry. The data were fitted to a model of fractional crystallization of the IVB parent body core, from which the composition of the parent melt and metal/melt distribution coefficients for each element in the system were determined, for a chosen value of D(Ni). Relative to Ni and chondritic abundances, the parent melt was enriched in refractory siderophiles, with greatest enrichment of 5× chondritic in the most refractory elements, and was strongly volatile-depleted, down to 0.00014× chondritic in Ge. Comparison to an equilibrium condensation sequence from a gas of solar composition indicates that no single temperature satisfactorily explains the volatility trend in the IVB parent melt; a small (<1%) complement of ultrarefractory components added to metal that is volatile-depleted but otherwise has nearly chondritic abundances (for Fe, Co and Ni) best explains the volatility trend. In addition to this volatility processing, which probably occurred in a nebular setting, there was substantial oxidation of the metal in the IVB parent body, leading to loss of Fe and other moderately siderophile elements such as Cr, Ga, and W, and producing the high Ni contents that are observed in the IVB irons. By assuming that the entire IVB parent body underwent a similar chemical history as its core, the composition of the silicate that is complementary to the IVB parent melt was also estimated, and appears to be similar to that of the angrite parent.  相似文献   

8.
Particles of FeNi metal ranging in size from a few mto 0.1 mm in diameter are a distinctive feature of the shock-generated melt rocks of Lake Lappajärvi. Irondeficient iron sulphide, pyrrhotite, is nearly always associated with the metal. Accessory phases are FeNiCo-sulphides, a phosphorus-bearing mineral (probably apatite), iron-rich aluminosilicates, and ilmenite. The content of Ni in the metal varies from less than 2% to more than 10%. There is evidence that the iron formed from molten globules which crystallized slowly and adjusted to low temperatures by solid state diffusion. The Ni concentration in the largest metal particles which appear to be least affected by alteration processes, and hence may represent the composition of the parent metal phase of the projectile, is, however, lower than in any reported meteoritic iron.  相似文献   

9.
We have investigated the partitioning of Ir. Ge, Ga, W, Cr, Au, P, and Ni between solid metal and metallic liquid as a function of temperature and S-concentration of the metallic liquid. Partition coefficients for siderophile elements such as Ir, W, Ga and Ge increase by factors of 10–100 as the Sconcentration of the metallic liquid increases from 0–30 wt%. Partition coefficients for other siderophile elements such as Ni, Au and P increase by only factors of 2–3. In contrast, partition coefficients for the more chalcophile element Cr decrease. These experimentally-determined partition coefficients have been used in conjunction with a fractional crystallization model to reproduce the geochemical behavior of Ni, P, Au and Ir during the magmatic evolution of groups IIAB, IIIAB, IVA and IVB iron meteorites. The mean S-concentration for each group increases in the order IVB, IVA, IIIAB, IIAB, in accord with cosmochemical prediction. However, we are unable to reproduce the geochemical behavior of Ge, Ga, W and Cr in an internally consistent way. We conclude that the magmatic histories of these iron meteorite groups are more complex than has been generally assumed.  相似文献   

10.
To characterize the compositions of materials accreted to the Earth-Moon system between about 4.5 and 3.8 Ga, we have determined Os isotopic compositions and some highly siderophile element (HSE: Re, Os, Ir, Ru, Pt, and Pd) abundances in 48 subsamples of six lunar breccias. These are: Apollo 17 poikilitic melt breccias 72395 and 76215; Apollo 17 aphanitic melt breccias 73215 and 73255; Apollo 14 polymict breccia 14321; and lunar meteorite NWA482, a crystallized impact melt. Plots of Ir versus other HSE define excellent linear correlations, indicating that all data sets likely represent dominantly two-component mixtures of a low-HSE target, presumably endogenous component, and a high-HSE, presumably exogenous component. Linear regressions of these trends yield intercepts that are statistically indistinguishable from zero for all HSE, except for Ru and Pd in two samples. The slopes of the linear regressions are insensitive to target rock contributions of Ru and Pd of the magnitude observed; thus, the trendline slopes approximate the elemental ratios present in the impactor components contributed to these rocks. The 187Os/188Os and regression-derived elemental ratios for the Apollo 17 aphanitic melt breccias and the lunar meteorite indicate that the impactor components in these samples have close affinities to chondritic meteorites. The HSE in the Apollo 17 aphanitic melt breccias, however, might partially or entirely reflect the HSE characteristics of HSE-rich granulitic breccia clasts that were incorporated in the impact melt at the time of its creation. In this case, the HSE characteristics of these rocks may reflect those of an impactor that predated the impact event that led to the creation of the melt breccias. The impactor components in the Apollo 17 poikilitic melt breccias and in the Apollo 14 breccia have higher 187Os/188Os, Pt/Ir, and Ru/Ir and lower Os/Ir than most chondrites. These compositions suggest that the impactors they represent were chemically distinct from known chondrite types, and possibly represent a type of primitive material not currently delivered to Earth as meteorites.  相似文献   

11.
The composition of the sampled melt rocks at the 22 km diameter E. Clearwater impact structure indicates the presence of ～8% C-1 material. The meteoritic component is fractionated with refractory siderophiles, up to 30 times C-1 abundances, concentrated in ten to hundred micron-sized, magnetic particles. These particles consist of the Ni-sulphide, millerite, and what is assumed to be a mixture of refractory silicates and magnetite with grain sizes of <1 μm. The larger particles have a core-rim structure with millerite and occasionally very minor galena and possibly pentlandite in the core. An origin as a combination of altered meteoritic metal and condensed meteoritic silicate is favored for the origin of the siderophile-rich particles. If 8% meteoritic material is taken as the average meteoritic contamination in the melt, then the E. Clearwater projectile may have impacted with a velocity of 17 km s?1. Peak shock pressures would have been of the order of 300 GPa, sufficient to vaporize the silicate component but only melt the metal component of the projectile. As the meteoritic material was being driven down into vaporized/ melted target rocks during the initial stages of impact, the melted Fe, Ni metal underwent oxidation, Fe was removed, and meteoritic silicate material recondensed on the cooler, essentially Ni metal. As cavity excavation proceeded, these Ni metal, silicate-oxide particles were incorporated in the melt, their refractory nature prevented thermal digestion and sulphur in the melt reacted with the metal to produce millerite on final equilibration. If this hypothesis is correct, it suggests that the E. Clearwater projectile was a C-2 or C-3 chondrite, both of which are compatible with the trace element composition of the melt rocks. Clearwater Lake is a twin impact structure formed by an asteroid pair. It is still not clear, however, what type of projectile formed the 32 km diameter western structure, where the surface melt rocks contain no identifiable meteoritic signature.  相似文献   

12.
The Palaeoproterozoic Ni–Cu sulphide deposits of the PechengaComplex, Kola Peninsula, occur in the lower parts of ferropicriticintrusions emplaced into the phyllitic and tuffaceous sedimentaryunit of the Pilgujärvi Zone. The intrusive rocks are comagmaticwith extrusive ferropicrites of the overlying volcanic formation.Massive lavas and chilled margins from layered flows and intrusionscontain <3–7 ng/g Pd and Pt and <0·02–2·0ng/g Ir, Os and Ru with low Pd/Ir ratios of 5–11. Theabundances of platinum group elements (PGE) correlate with eachother and with chalcophile elements such as Cu and Ni, and indicatea compatible behaviour during crystallization of the parentalmagma. Compared with the PGE-depleted central zones of differentiatedflows (spinifex and clinopyroxene cumulate zones) the olivinecumulate zones at the base contain elevated PGE abundances upto 10 ng/g Pd and Pt. A similar pattern is displayed in intrusivebodies, such as the Kammikivi sill and the Pilgujärvi intrusion.The olivine cumulates at the base of these bodies contain massiveand disseminated Ni–Cu-sulphides with up to 2 µg/gPd and Pt, but the PGE concentrations in the overlying clinopyroxenitesand gabbroic rocks are in many cases below the detection limits.The metal distribution observed in samples closely representingliquid compositions suggests that the parental magma becamesulphide saturated during the emplacement and depleted in chalcophileand siderophile metals as a result of fractional segregationof sulphide liquids. Relative sulphide liquid–silicatemelt partition coefficients decrease in the order of Ir >Rh > Os > Ru > Pt = Pd > Cu. R-factors (silicate-sulphidemass ratio) are high and of the order of 104–105, andthey indicate the segregation of only small amounts of sulphideliquid in the parental ferropicritic magma. In differentiatedflows and intrusions the sulphide liquids segregated and accumulatedat the base of these bodies, but because of a low silicate–sulphidemass ratio the sulphide liquids had a low PGE tenor and Pt/Irand Cu/Ir ratios similar to the parental silicate melts. Duringcooling the sulphide liquid crystallized 40–50% of monosulphidesolid solution (mss) and the residual sulphide liquid becameenriched in Cu, Pt and Pd and depleted in Ir, Os and Ru. TheCu-rich sulphide liquid locally assimilated components of thesurrounding S-rich sediments as suggested by the radiogenicOs isotopic composition of some sulphide ores (  相似文献   

13.
Sixteen crater samples were analyzed by radiochemical neutron activation analysis for Ge, Ir, Ni, Os, Pd and Re. Two impact melt rock samples from Clearwater East (22 km) showed strong, uniform enrichments in all elements except Ge, corresponding to 7.4% C1 chondrite material. Interelement ratios suggest that the meteorite was a C1 (or C2) chondrite, not an iron, stony iron, or chondrite of another type. An Ivory Coast tektite (related to the 10 km Bosumtwi crater) was enriched in Ir + Os and Ni to about 0.04 and 1.6% of C1 chondrite levels, but in the absence of data on country rocks, the meteorite cannot yet be characterized.Impact melt rock samples from Clearwater West (32km), Manicouagan (70km), and Mistastin (28 km) showed no detectable meteoritic component. Upper limits, as Cl chondrite equivalent, were Os ≤ 2 × 10?3% (~0.01 ppb), Ni ≤ 2 × 10?1% (~20ppm). Possible causes are high impact velocity and/or a chemically inconspicuous meteorite (achondrite, Ir,Os-poor iron or stony iron). However, a more likely reason is that some fraction of the impact melt remains meteorite-free, especially at craters with central peaks.Clearwater East is the first terrestrial impact crater found to be associated with a stony meteorite. Apparently the consistent absence of stony projectiles at small craters (< 1 km diameter) reflects their destruction in the atmosphere, as proposed by Öpik.  相似文献   

14.
Based on structural observations and the concentrations of Cr, Co, Ni, Cu, Ga, Ge, As, Sb, Re, Ir, and Au by neutron-activation analysis we have classified 14 Chinese iron meteorites. Thirteen are members of the large groups IAB, IIICD, IIIAB and IVA. Leshan is an ungrouped iron meteorite that falls within the IIE field on some element-Ni diagrams, but is distinctly outside this field on plots of Cu, W, and Ir vs. Ni; it is very similar in composition to Techado, another ungrouped iron. The high Cu content of Leshan in consistent with other evidence indicating that Cu is a valuable parameter for classifying iron meteorites. IIICD Dongling appears not to be a new meteorite, but to be paired with Nantan; Dongling was recovered about 50 km from the location of the Nantan shower. In view of the fact that Yongning is highly oxidized, we assign it to group IAB but cannot rule out IIICD. IVA-An Longchang has many characteristics of IVA irons, but has been remelted, probably in a terrestrial setting. Five irons belong to group IVA, a remarkably large number. Three are identical in composition, and we suspect that the two from Hubei, Guanghua and Huangling, are paired. Thus this set of 14 irons includes 12 independent falls.  相似文献   

15.
The composition of the sampled melt rocks at the 22 km diameter E. Clearwater impact structure indicates the presence of 8% C-1 material. The meteoritic component is fractionated with refractory siderophiles, up to 30 times C-1 abundances, concentrated in ten to hundred micron-sized, magnetic particles. These particles consist of the Ni-sulphide, millerite, and what is assumed to be a mixture of refractory silicates and magnetite with grain sizes of <1 m. The larger particles have a core-rim structure with millerite and occasionally very minor galena and possibly pentlandite in the core. An origin as a combination of altered meteoritic metal and condensed meteoritic silicate is favored for the origin of the siderophile-rich particles. If 8% meteoritic material is taken as the average meteoritic contamination in the melt, then the E. Clearwater projectile may have impacted with a velocity of 17 km s–1. Peak shock pressures would have been of the order of 300 GPa, sufficient to vaporize the silicate component but only melt the metal component of the projectile. As the meteoritic material was being driven down into vaporized/ melted target rocks during the initial stages of impact, the melted Fe, Ni metal underwent oxidation, Fe was removed, and meteoritic silicate material recondensed on the cooler, essentially Ni metal. As cavity excavation proceeded, these Ni metal, silicate-oxide particles were incorporated in the melt, their refractory nature prevented thermal digestion and sulphur in the melt reacted with the metal to produce millerite on final equilibration. If this hypothesis is correct, it suggests that the E. Clearwater projectile was a C-2 or C-3 chondrite, both of which are compatible with the trace element composition of the melt rocks. Clearwater Lake is a twin impact structure formed by an asteroid pair. It is still not clear, however, what type of projectile formed the 32 km diameter western structure, where the surface melt rocks contain no identifiable meteoritic signature.  相似文献   

16.
Laser ablation inductively coupled plasma mass spectrometry was used to measure abundances of P, Cr, Fe, Co, Ni, Cu, Ga, Ge, As, Mo, Ru, Rh, Pd, Sn, Sb, W, Re, Os, Ir, Pt, and Au in metal grains in the Bencubbin-like chondrites Bencubbin, Weatherford, and Gujba to determine the origin of large metal aggregates in bencubbinites. A strong volatility-controlled signature is observed among the metal grains. The refractory siderophiles Ru, Rh, Re, Os, Ir, and Pt are unfractionated from one another, and are present in approximately chondritic relative abundances. The less refractory elements Fe, Co, Ni, Pd, and Au are fractionated from the refractory siderophiles, with a chondritic Ni/Co ratio and a higher than chondritic Pd/Fe ratio. The moderately volatile siderophile elements Ga, Ge, As, Sn, and Sb are depleted in the metal, relative to chondritic abundances, by up to 3 orders of magnitude. The trace siderophile element data are inconsistent with the following proposed origins of Bencubbin-Weatherford-Gujba metal: (1) condensation from the canonical solar nebula, (2) oxidation of an initially chondritic metal composition, and (3) equilibration with a S-rich partial melt. A condensation model for metal-enriched (×107 CI) gas is developed. Formation by condensation or evaporation in such a high-density, metal-enriched gas is consistent with the trace element measurements. The proposed model for generating such a gas is protoplanetary impact involving a metal-rich body.  相似文献   

17.
Reported in this paper are structural and compositional data as the basis for the classification of 35 iron meteorites. The Xingjiang iron meteorite, previously labelled IIIAB, is reclassified as IIIE on the basis of its lower Ga/Ni and Ge/Ni ratios, its wider and swollen kamacite bands and the ubiquitous presence of haxonite, (Fe, Ni)23C. IIICD Dongling appears not to be a new meteorite, but to be paired with Nandan. Four Antarctic iron meteorites IAB Allan Hills A77250, A77263, A77289 and A77290 are classified as paired meteorites based on their similarities in structure, and the concentrations of Cr, Co, Ni, Cu, Ga, Ge, As, Sb, W, Re, Ir and Au. It is found that Cu shares certain properties with Ga and Ge, which makes it an excellent taxonomic parameter. BecauseK Cu is near unity, Cu displays a small range of variation within most magmatic groups (less than a factor of 2.2) and, because of its high volatility, large variations can be noticed among groups.  相似文献   

18.
The behavior of the platinum group elements (PGE) and Re in felsic magmas is poorly understood due to scarcity of data. We report the concentrations of Ni, Cu, Re, and PGE in the compositionally diverse Boggy Plain zoned pluton (BPZP), which shows a variation of rock type from gabbro through granodiorite and granite to aplite with a SiO2 range from 52 to 74 wt %. In addition, major silicate and oxide minerals were analyzed for Ni, Cu, and Re, and a systematic sulfide study was carried out to investigate the role of silicate, oxide, and sulfide minerals on chalcophile element geochemistry of the BPZP. Mass balance calculation shows that the whole rock Cu budget hosted by silicate and oxide minerals is <13 wt % and that Cu is dominantly located in sulfide phases, whereas most of the whole rock Ni budget (>70 wt %) is held in major silicate and oxide minerals. Rhenium is dominantly hosted by magnetite and ilmenite. Ovoid-shaped sulfide blebs occur at the boundary between pyroxene phenocrysts and neighboring interstitial phases or within interstitial minerals in the gabbro and the granodiorite. The blebs are composed of pyrrhotite, pyrite, chalcopyrite, and S-bearing Fe-oxide, which contain total trace metals (Co, Ni, Cu, Ag, Pb) up to ~16 wt %. The mineral assemblage, occurrence, shape, and composition of the sulfide blebs are a typical of magmatic sulfide. PGE concentrations in the BPZP vary by more than two orders of magnitude from gabbro (2.7–7.8 ppb Pd, 0.025–0.116 ppb Ir) to aplite (0.05 ppb Pd, 0.001 ppb Ir). Nickel, Cu, Re, and PGE concentrations are positively correlated with MgO in all the rock types although there is a clear discontinuity between the granodiorite and the granite in the trends for Ni, Rh, and Ir when plotted against MgO. Cu/Pd values gradually increase from 6,100 to 52,600 as the MgO content decreases. The sulfide petrology and chalcophile element geochemistry of the BPZP show that sulfide saturation occurred in the late gabbroic stage of magma differentiation. Segregation and distribution of these sulfide blebs controlled Cu and PGE variations within the BPZP rocks although the magma of each rock type may have experienced a different magma evolution history in terms of crustal assimilation and crystal fractionation. The sulfide melt locked in the cumulate rocks must have sequestered a significant portion of the chalcophile elements, which restricted the availability of these metals to magmatic-hydrothermal ore fluids. Therefore, we suggest that the roof rocks that overlay the BPZP were not prospective for magmatic-hydrothermal Cu, Au, or Cu–Au deposits.  相似文献   

19.
Basalts and basaltic cumulates from Mars (delivered to Earth as meteorites) carry a record of the history of that planet - from accretion to initial differentiation and subsequent volcanism, up to recent times. We provide new microprobe data for plagioclase, olivine, and pyroxene from 19 of the martian meteorites that are representative of the six types of martian rocks. We also provide a comprehensive WDS map dataset for each sample studied, collected at a common magnification for easy comparison of composition and texture. The silicate data shows that plagioclase from each of the rock types shares similar trends in Ca-Na-K, and that K2O/Na2O wt% of plagioclase multiplied by the Al content of the bulk rock can be used to determine whether a rock is “enriched” or “depleted” in nature. Olivine data show that meteorite Y 980459 is a primitive melt from the martian mantle as its olivine crystals are in equilibrium with its bulk rock composition; all other olivine-bearing Shergottites have been affected by fractional crystallization. Pyroxene quadrilateral compositions can be used to isolate the type of melt from which the grains crystallized, and minor element concentrations in pyroxene can lend insight into parent melt compositions.In a comparative planetary mineralogy context, plagioclase from Mars is richer in Na than terrestrial and lunar plagioclase. The two most important factors contributing to this are the low activity of Al in martian melts and the resulting delayed nucleation of plagioclase in the crystallizing rock. Olivine from martian rocks shows distinct trends in Ni-Co and Cr systematics compared with olivine from Earth and Moon. The trends are due to several factors including oxygen fugacity, melt compositions and melt structures, properties which show variability among the planets. Finally, Fe-Mn ratios in both olivine and pyroxene can be used as a fingerprint of planetary parentage, where minerals show distinct planetary trends that may have been set at the time of planetary accretion.Although the silicate mineralogical data alone cannot support one specific model of martian magmatism over another, the data does support the basic igneous reservoirs proposed for Mars, and may also be used to constrain some aspects of specific petrogenetic models. Examples include enriched and depleted reservoirs that can be identified by plagioclase K, Na and Al composition, multivalent element partitioning in olivine and pyroxene (V, Cr) elucidates oxygen fugacity conditions of the reservoirs, and minor element concentrations (i.e., Cr in pyx) show that proposed fractional crystallization models linking Y 980459 to QUE 94201 will not work.  相似文献   

20.
This paper provides important insights into the generation, extraction and crystallization of clast-laden impact melt rocks from the Araguainha impact structure, central Brazil. Despite the mixed nature of the Araguainha target rocks (comprising a 2 km thick sequence of sedimentary rocks and underlying granitic basement), the exposed melt bodies are characterised by an alkali-rich granitic matrix embedding mineral and rock fragments derived only from the target granite. The melt rocks occur in the form of a massive impact melt sheet overlying the eroded central uplift structure, and as melt veins in the granite of the core of the central uplift. Bulk-rock major and trace element data (including platinum group elements) indicate that the precursor melts were generated locally, principally by partial melting of the target granite, without any contribution from the sedimentary sequence or the projectile. The dense network of melt veins was formed in isolation, by selective melting of plagioclase and alkali feldspar within the granite target. Plagioclase and alkali feldspar melted discretely and congruently, producing domains in the matrix of the melt veins, which closely match the stoichiometry of these minerals. The compositionally discrete initial melt phases migrated through a dense network of microfractures before being assembled into larger melt veins. Freezing of the melt veins was substantially fast, and the melt components were quenched in the form of alkali-feldspar and plagioclase schlieren in the matrix of the melt veins. The overlying impact melt rock is, in contrast, characterised by a granophyric matrix consisting of albite, sanidine, quartz, biotite and chlorite. In this case, melt components appear to have been more mobile and to have mixed completely to form a granitic parental melt. We relate the melting of the minerals to post-shock temperatures that exceeded the melting point of feldspars.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号