共查询到18条相似文献,搜索用时 171 毫秒
1.
2.
3.
4.
5.
多波束系统的参数误差判断及校正 总被引:5,自引:3,他引:5
多波束回声测深系统具有高精度、高效率测量的特点。系统参数的可靠性直接影响着测量结果的精度,本文试图对主要的系统参数误差进行分析,判断误差的种类和来源,并提出测定的方法及校正措施。 相似文献
6.
多波束系统及其在海洋工程勘察中的应用 总被引:3,自引:2,他引:3
多波束测深系统采用条带式测量方式,可对海底进行全覆盖扫描测量,精确测得海底地形地貌。简要回顾了海底地形测量的进展,以SIMRAD EM3000波束系统的测量实例说明多波束系统在海洋工程勘察中的应用。 相似文献
7.
多波束测深系统采用条带测量方式,可对水底进行全覆盖无遗漏测量,具有高精度、高效率、高质量等优点。本文概述了EM1002型多波束测深系统的技术性能,详细介绍了运用Calibrate多参数校准软件对其内部参数的校正。 相似文献
8.
多波束测深系统声速校正 总被引:5,自引:0,他引:5
海水声速是多波束测深系统进行水深测量的基本参数之一,声速剖面正确与否直接影响测量结果的精度和可靠性,本文阐述了声对多波束水深测量的影响机理,并通过对南海SA12试验区采集的声速资料的分析,以SeaBeam2100多波束测深系统为例,对声速校正的技术方法进行了探讨。 相似文献
9.
相干声纳多波束与传统型多波束测深系统综合对比与实验分析 总被引:1,自引:0,他引:1
在工作原理、技术参数、采集软件和处理软件功能与操作,以及数据实测等方面对相干声纳多波束测深系统Geoswath Plus和传统型多波束测深系统Seabeam 1180进行了详细对比。对比表明,两套多波束系统的工作原理完全不同;传统型多波束测深系统在探头下方数据密集,两侧的数据逐渐变稀,相干声纳多波束测深系统在探头正下方的数据比较稀疏,探头两侧的数据较密集;相干声纳多波束测深系统Geoswath Plus的采集和处理软件实现了一体化,具有较直观的数据质量监控功能,传统型多波束测深系统Seabeam 1180可应用的后处理软件较多,功能更丰富;通过实测数据验证,两套多波束测深系统在数据测量精度上具有较好的一致性,不符值数列的标准偏差为3%—4%。对比为多波束测深系统的引进和选型提供了参考依据。 相似文献
10.
本文简要地介绍了DGPS的工作原理及海底地形地要幅测量系统的分类,着重介绍了Seabeam2112多波束海底地形地貌条幅测量系统的技术性能和SercelDGPS在Sabeam2112海底地形地貌条幅测量系统参数调试和精度评估中的重要作用。 相似文献
11.
12.
随着测量技术的不断进步,多波束测深系统以其高效率、全覆盖的特点,得到广泛认可并应用于海道测量工作中,然而不同型号的多波束测深系统,其信号质量在不同使用方法下有着显著的差异[1].针对影响Reson 8101增强型多波束数据质量的几项因素进行测试并分析,从而找出有效提高数据质量的方法. 相似文献
13.
14.
多波束测深系统声速校正 总被引:13,自引:0,他引:13
海水声速是多波束测深系统进行水深测量的基本参数之一,声速剖面正确与否直接影响测量结果的精度和可靠性。声速校正为多波束测深系统提供了正确的声速剖面,根据声速剖面垂向上的变化规律,对原始声速数据进行科学采点,运用软件方法或实验方法对声速剖面进行编辑获得声速数据,最终取得合理可靠的水深值。这里对南海SA12试验区采集的声速资料进行了分析,以SeaBeam2100多波速测深系统为例,对声速校正的技术方法进行了探讨。 相似文献
15.
A computer code that simulates multibeam echo‐sounding over realistic (three‐dimensional) bathymetry was used to compare available sounding systems. Two‐dimensional modeling dealt with the resolution of seafloor bathymetry and with the effect of postprocessing algorithms for some typical multibeam systems. The 2‐D bathymetric inputs were idealized bottom features. Three‐dimensional modeling dealt with the gross character of the seafloor, as detected by echo‐sounding systems. The 3‐D bathymetric inputs were realizations of terrain generated by a stochastic model of seafloor roughness. Three‐dimensional modeling indicated that the sounding system may slightly shift the location of peaks within the beam footprint. In addition, the simulated measurements were more sensitive to low‐wavenumber features (i.e., large‐scale roughness) than to high‐wavenumber features (i.e., small‐scale roughness). Resolution gradually decreased with increasing distance from centerline, due to the increasing footprint size of beams at increasing angular distance from the vertical. Lineated terrain was also smoothed by simulated echo‐sounding; lineations may indeed remain undetected if sounding system parameters are not properly selected. Inversion of the simulated measurements indicated that echo‐sounding measurements are dependent not only on the characteristics of the sounding system itself, but on other factors such as the character of the roughness and the orientation of the survey relative to the strike of lineations. The modeling technique provides a way to quantify the system response of a multibeam echo‐sounding system. This work resulted in recommendations as to the most appropriate system for an application in an area of rough bathymetry, and it led to the establishment of criteria for comparing multibeam systems in future applications. 相似文献
16.
17.