首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
In this study, sensible heat (H) calculation using remote sensing data over an alpine grass landscape is conducted from May to September 2010, and the calculation is validated using LAS (large aperture scintillometers) measurements. Data from two remote sensing sensors (FY3A-VIRR and TERRA-MODIS) are analysed. Remote sensing data, combined with the ground meteorological observations (pressure, temperature, wind speed, humidity) are fed into the SEBS (Surface Energy Balance System) model. Then the VIRR-derived sensible heat (VIRR_SEBS_H) and MODIS-derived sensible heat (MODIS_SEBS_H) are compared with the LAS-estimated H, which are obtained at the respective satellite overpass time. Furthermore, the similarities and differences between the VIRR_SEBS_H and MODIS_SEBS_H values are investigated. The results indicate that VIRR data quality is as good as MODIS data for the purpose of H estimation. The root mean square errors (rmse) of the VIRR_SEBS_H and MODIS_SEBS_H values are 45.1098 W/m2 (n = 64) and 58.4654 W/m2 (n = 71), respectively. The monthly means of the MODIS_SEBS_H are marginally higher than those of VIRR_SEBS_H because the satellite overpass time of the TERRA satellite lags by 25 min to that of the FT3A satellite. Relative evaporation (EFr), which is more time-independent, shows a higher agreement between MODIS and VIRR. Many common features are shared by the VIRR_SEBS_H and the MODIS_SEBS_H, which can be attributed to the SEBS model performance. In May–June, H is over-estimated with more fluctuations and larger rmse, whereas in July–September, H is under-estimated with fewer fluctuations and smaller rmse. Sensitivity analysis shows that potential temperature gradient (delta_T) plays a dominant role in determining the magnitude and fluctuation of H. The largest rmse and over-estimation in H occur in June, which could most likely be attributed to high delta_T, high wind speed, and the complicated thermodynamic state during the transitional period when bare land transforms to dense vegetation cover.  相似文献   

2.
In this paper, a user-defined inter-band correlation filter function was used to resample hyperspectral data and thereby mitigate the problem of multicollinearity in classification analysis. The proposed resampling technique convolves the spectral dependence information between a chosen band-centre and its shorter and longer wavelength neighbours. Weighting threshold of inter-band correlation (WTC, Pearson's r) was calculated, whereby r = 1 at the band-centre. Various WTC (r = 0.99, r = 0.95 and r = 0.90) were assessed, and bands with coefficients beyond a chosen threshold were assigned r = 0. The resultant data were used in the random forest analysis to classify in situ C3 and C4 grass canopy reflectance. The respective WTC datasets yielded improved classification accuracies (kappa = 0.82, 0.79 and 0.76) with less correlated wavebands when compared to resampled Hyperion bands (kappa = 0.76). Overall, the results obtained from this study suggested that resampling of hyperspectral data should account for the spectral dependence information to improve overall classification accuracy as well as reducing the problem of multicollinearity.  相似文献   

3.
ABSTRACT

To analyze the efficiency of area estimations (i.e. estimation accuracy and variation of estimation) impacted by crop mapping error, we simulated error at eight levels for thematic maps using a stratified sampling estimation methodology. The results show that the estimation efficiency is influenced by the combination of the sample size and the error level. Evaluating the trade-offs between sample size and error level showed that reducing the crop mapping error level provides the most benefit (i.e. higher estimation efficiency). Further, sampling performance differed based on the heterogeneity of the crop area. The results demonstrated that the influence of increasing the error level on estimation efficiency is more detrimental in heterogeneous areas than in homogeneous ones. Therefore, to obtain higher estimation efficiency, a larger sample size and lower error level or both are needed, especially in heterogeneous areas. We suggest that existing land-cover maps should first be used to determine the heterogeneity of the area. The appropriate sample size for these areas then can be determined according to all three factors: heterogeneity, expected estimation efficiency, and sampling budget. Overall, extending our understanding of the impacts of crop mapping error is necessary for decision making to improve our ability to effectively estimate crop area.  相似文献   

4.
《The Cartographic journal》2013,50(3):259-263
Abstract

This paper reports the findings of an international survey that collected data on production methods, techniques, outputs and design preferences among tactile map producers, designers and researchers worldwide. A number of consistencies and inconsistencies are identified and we speculate on the extent to which the current state of tactile map production is likely to meet the needs of the client population. We describe the sample on which the report is based, the output in terms of quantity of maps produced, choice of production method, types of environment mapped and intended uses of maps. We also focus on issues of map design, such as the choice of map size and format, and choice of symbols.  相似文献   

5.
Thaumastocoris peregrinus (T. peregrinus) is a sap sucking insect that feeds on Eucalyptus leaves. It poses a threat to the forest industry by reducing the photosynthetic ability of the tree, resulting in stunted growth and even death of severely infested trees. Remote sensing techniques offer the potential to detect and map T. peregrinus infestations in plantation forests using current operational hyperspectral scanners. This study resampled field spectral data measured from a field spectrometer to the band settings of the Hyperion sensor in order to assess its potential in predicting T. peregrinus damage. Normalized indices based on NDVI ratios were calculated using the resampled visible and near-infrared bands of the Hyperion sensor to assess its utility in predicting T. peregrinus damage using Partial Least Squares (PLS) regression. The top 20 normalized indices were based on specific biochemical absorption features that predicted T. peregrinus damage with a mean bootstrapped R2 value of 0.63 on an independent test dataset. The top 20 indices were located in the near-infrared region between 803.3 nm and 894.9 nm. Twenty three previously published hyperspectral indices which have been used to assess stress in vegetation were also used to predict T. peregrinus damage and resulted in a mean bootstrapped R2 value of 0.59 on an independent test dataset. The datasets were combined to assess its collective strength in predicting T. peregrinus damage and significant indices were chosen based on variable importance scores (VIP) and were then entered into a PLS model. The indices chosen by VIP predicted T. peregrinus damage with a mean bootstrapped R2 value of 0.71 on an independent test dataset. A greedy backward variable selection model was further tested on the VIP selected indices in order to find the best subset of indices with the best predictive accuracy. The greedy backward variable selection model identified 3 indices and performed the best by predicting damage with an R2 value of 0.74 with the lowest RMSE of 1.30% on an independent test dataset. The best three indices identified include the anthocyanin reflectance index, carotenoid reflectance index and the normalized index calculated at 864.4 and 884.7 nm. Individual relationships between these indices and T. peregrinus damage indicate that high correlations are obtained with the inclusion of a few severely infested trees in the sample size. When the severely infested trees were removed from the study, the normalized index (864.4 and 884.7 nm) and the anthocyanin reflectance index still yielded significant correlations at the 99% confidence interval. This study indicates the significance of normalized indices and spectral indices calculated from the visible and near-infrared bands in hyperspectral data for the prediction of T. peregrinus damage.  相似文献   

6.
In this study, an evaluation of fuzzy-based classifiers for specific crop identification using multi-spectral temporal data spanning over one growing season has been carried out. The temporal data sets have been georeferenced with 0.3 pixel rms error. Temporal information of cotton crop has been incorporated through the following five indices: simple ratio (SR), normalized difference vegetation index (NDVI), transformed normalized difference vegetation index (TNDVI), soil-adjusted vegetation index (SAVI) and triangular vegetation index (TVI), to study the effect of indices on classified output. For this purpose, a comparative study between two fuzzy-based soft classification approaches, possibilistic c-means (PCM) and noise classifier (NC), was undertaken. In this study, advanced wide field sensor (AWiFS) data for soft classification and linear imaging self scanner sensor (LISS III) data for soft testing purpose from Resourcesat-1 (IRS-P6) satellite were used. It has been observed that NC fuzzy classifier using TNDVI temporal index – dataset 2, which comprises four temporal images performs better than PCM classifier giving highest fuzzy overall accuracy of 96.03%.  相似文献   

7.
Four binary thematic maps with combinations of two spatial autocorrelation levels and two different class proportions are simulated to study their effect on the precision of accuracy measures from different sampling designs. A series of eleven sample sizes (from a minimum of 25 to a maximum of 1296) are simulated using three popular sampling designs, including simple random sampling (SRS), systematic sampling (SYS), and stratified random sampling (StrRS) on the four simulated maps. The conventional error matrix and related accuracy measures are calculated for each simulation, and the precision of different estimates of accuracy measures is compared among the three sampling designs.The selection of a particular sampling design and sample size depends on the spatial autocorrelation level, the class proportion difference, and the accuracy indices that a given application requires. In general, the class proportion difference has a greater impact on the performance of different sampling methods than the spatial autocorrelation level does on a map. For estimating the accuracy of individual classes, stratified sampling achieves better precision than SRS and SYS with smaller sample sizes, especially for estimating the small class. For estimating the overall accuracy, different sampling designs achieve very similar levels of precision with fewer samples. To achieve a better estimate of the kappa coefficient, stratified random sampling is recommended for use on a map with a high class proportion difference, while random sampling is preferred for a map with low spatial autocorrelation and a low class proportion difference.  相似文献   

8.
The spread of invasive Australia native Acacia tree species threatens biodiversity and adversely affecting on vegetative structure and function, including plant community composition, quantity and quality worldwide. It is essential to provide researchers and land managers for biological invasion science and management with accurate information of the distribution of invasive alien species and their dynamics. Remotely sensed data that reveal spatial distribution of the earth’s surface features/objects provide great potential for this purpose. Consistent satellite monitoring of alien invasive plants is often difficult because of lack of sufficient spectral contrast between them and co-occurring plants species. Time series analysis of spectral properties of the species can reveal timing of their variations among adjacent species. This information can improve accuracy of invasive species discrimination and mapping using remote sensing data at large scale. We sought to identify and better understand the optimal time window and key spectral features sufficient to detect invasive Acacia trees in heterogeneous forested landscape in South Africa. We explored one-year (January to December 2018) time series spectral bands and vegetation indices derived from optical Copernicus Sentinel-2 data. The attributes correspond to geographical information of invasive Acacia and native species recorded during a field survey undertaken from 21 February to 25 February 2018 over Kwa-Zulu Natal grasslands landscape, in South Africa. The results showed comparable separability prospects between times series of spectral bands and that of vegetation indices.Substantial differences between Acacia species and native species were observed from spectral indices and spectral bands which are sensitive to Leaf Area Index, canopy chlorophyll and nitrogen concentrations. The results further revealed spectral differences between Acacia species and co-occurring native vegetation in April (senescence for deciduous plants), June-July (dry season), September (peak flowering period of Acacia spp) and December (leaf green-up) with vegetation indices (overall accuracy > 80 %). While spectral bands showed the beginning of the growing season (November–January) and peak vegetation productivity (February-March) as the optimal seasons or dates for image acquisition for discriminating Acacias from its co-occurring native species (overall accuracy > 80 %). In general, the use of Sentinel-2 time series spectral bands and vegetation indices has increased our understanding of Australian Acacias spectral dynamics, and proved that the sentinel-2 data is useful for characterization and monitoring Acacias over a large scale. Our results and approach could assist in deriving detailed geographic information of the species and assessment of a spread invasive plant species and severity of invasion.  相似文献   

9.
In Africa, food security early warning systems use satellite-derived data concerning crop conditions and agricultural production. Such systems can be improved if they are provided with a more reliable estimation of the cultivated area at national scale. This paper evaluates the potential of using time series from the MODerate resolution Imaging Spectroradiometer MOD13Q1 (16-day composite of normalized difference vegetation index at 250 m resolution) to extract cultivated areas in the fragmented rural landscapes of Mali. To this end, we first stratified Southern Mali into 13 rural landscapes based on the spatio-temporal variability of NDVI and textural indices, using an object-oriented classification scheme.The accuracy of the resulting map (MODIScrop) and how it compares with existing coarse-resolution global land products (GLC2000 Africa, GLOBCOVER, MODIS V05 and ECOCLIMAP-II), was then assessed against six crop/non-crop maps derived from SPOT 2.5 m resolution images used as references. For crop areal coverage, the MODIScrop cultivated map was successful in assessing the overall cultivated area at five out of the six validation sites (less than 6% of the absolute difference), while in terms of crop spatial distribution, the producer accuracy was between 33.1% and 80.8%. This accuracy was linearly correlated with the mean patch size index calculated on the SPOT crop maps (r2 = 0.8). Using the Pareto boundary as an accuracy assessment method at the study sites, we showed that (i) 20-40% of the classification crop error was due to the spatial resolution of the MODIS sensor (250 m), and that (ii) compared to MODIS V05, which otherwise performed better than the other existing products, MODIScrop generally minimized omission-commission errors. A spatial validation of the different products was carried out using SPOT image classifications as reference. In the corresponding error matrices, the fraction of correctly classified pixels for our product was 70%, compared to 58% for MODIS V05, while it ranged between 40% and 51% for the GLC2000, the ECOCLIMAP-II and the GLOBCOVER.  相似文献   

10.
Timely diagnosis of crop diseases in fields is critical for precision on-farm disease management. Remote sensing technology can be used as an effective and inexpensive method to identify diseased plants in a field scale. However, due to the diversity of crops and their associated diseases, application of the technology to agriculture is still in research stage, which needs to be elaborately investigated for algorithm development and standard image processing procedures. In this paper, we examined the applicability of broadband high spatial-resolution ADAR (Airborne Data Acquisition and Registration) remote sensing data to detect rice sheath blight and developed an approach to further explore the applicability. Based on the field symptom measurements, a comprehensive field disease index (DI) was constructed to measure infection severity of the disease and to relate to image sampled infections. In addition to direct band digital number (DN) values, band ratio indices and standard difference indices were used to examine possible correlations between field and image data. The results indicated that the broadband remote sensing imagery has the capability to detect the disease. Some image indices such as RI14, SDI14 and SDI24 worked better than others. A correlation coefficient above 0.62 indicated that these indices would be valuable to use for identification of the rice disease. In the validation analysis, we obtained a small root mean square error (RMS = 9.1), confirming the applicability of the developed method. Although the results were encouraging, it was difficult to discriminate healthy plants from light infection ones when DI < 20 because of their spectral similarities. Hence, it was clear that identification accuracy increases when infection reaches medium-to-severe levels (DI > 35). This phenomenon illustrated that remote sensing images with higher spectral resolution (more bands and narrower bandwidth) were required in order to further examine the capability of separating the light diseased plants from healthy plants.  相似文献   

11.
Conventional algorithms for polygon rasterization are typically designed to maintain non-topological characteristics. Consequently, topological relationships, such as the adjacency between polygons, may also be lost or altered, creating topological errors. This paper proposes a topology-preserving polygon rasterization algorithm to avoid topological errors. Four types of topological error may occur during polygon rasterization. The algorithm starts from an initial polygon rasterization and uses a set of preserving strategies to increase topological accuracy. The count of the four types of error measures the topological errors of the conversion. Topological accuracy is summarized as 1 minus the ratio of actual topological errors to the total number of possible error cases. When applied to a land-use dataset with a data volume of 128 MB, 127,836 polygons, and extending 1352 km2, the algorithm achieves a topological accuracy of more than 99% when raster cell size is 30 m or smaller (100% for 5 and 10 m). The effects of cell size, polygon shape, and number of iterations on topological accuracy are also examined.  相似文献   

12.
Fine scale maps of vegetation biophysical variables are useful status indicators for monitoring and managing national parks and endangered habitats. Here, we assess in a comparative way four different retrieval methods for estimating leaf area index (LAI) in grassland: two radiative transfer model (RTM) inversion methods (one based on look-up-tables (LUT) and one based on predictive equations) and two statistical modelling methods (one partly, the other entirely based on in situ data). For prediction, spectral data were used that had been acquired over Majella National Park in Italy by the airborne hyperspectral HyMap instrument. To assess the performance of the four investigated models, the normalized root mean squared error (nRMSE) and coefficient of determination (R2) between estimates and in situ LAI measurements are reported (n = 41). Using a jackknife approach, we also quantified the accuracy and robustness of empirical models as a function of the size of the available calibration data set. The results of the study demonstrate that the LUT-based RTM inversion yields higher accuracies for LAI estimation (R2 = 0.91, nRMSE = 0.18) as compared to RTM inversions based on predictive equations (R2 = 0.79, nRMSE = 0.38). The two statistical methods yield accuracies similar to the LUT method. However, as expected, the accuracy and robustness of the statistical models decrease when the size of the calibration database is reduced to fewer samples. The results of this study are of interest for the remote sensing community developing improved inversion schemes for spaceborne hyperspectral sensors applicable to different vegetation types. The examples provided in this paper may also serve as illustrations for the drawbacks and advantages of physical and empirical models.  相似文献   

13.
In this study, we tested whether the inclusion of the red-edge band as a covariate to vegetation indices improves the predictive accuracy in forest carbon estimation and mapping in savanna dry forests of Zimbabwe. Initially, we tested whether and to what extent vegetation indices (simple ratio SR, soil-adjusted vegetation index and normalized difference vegetation index) derived from high spatial resolution satellite imagery (WorldView-2) predict forest carbon stocks. Next, we tested whether inclusion of reflectance in the red-edge band as a covariate to vegetation indices improve the model's accuracy in forest carbon prediction. We used simple regression analysis to determine the nature and the strength of the relationship between forest carbon stocks and remotely sensed vegetation indices. We then used multiple regression analysis to determine whether integrating vegetation indices and reflection in the red-edge band improve forest carbon prediction. Next, we mapped the spatial variation in forest carbon stocks using the best regression model relating forest carbon stocks to remotely sensed vegetation indices and reflection in the red-edge band. Our results showed that vegetation indices alone as an explanatory variable significantly (p < 0.05) predicted forest carbon stocks with R2 ranging between 45 and 63% and RMSE ranging from 10.3 to 12.9%. However, when the reflectance in the red-edge band was included in the regression models the explained variance increased to between 68 and 70% with the RMSE ranging between 9.56 and 10.1%. A combination of SR and reflectance in the red edge produced the best predictor of forest carbon stocks. We concluded that integrating vegetation indices and reflectance in the red-edge band derived from high spatial resolution can be successfully used to estimate forest carbon in dry forests with minimal error.  相似文献   

14.
The influence of morphophysiological variation at different growth stages on the performance of vegetation indices for estimating plant N status has been confirmed. However, the underlying mechanisms explaining how this variation impacts hyperspectral measures and canopy N status are poorly understood. In this study, four field experiments involving different N rates were conducted to optimize the selection of sensitive bands and evaluate their performance for modeling canopy N status of rice at various growth stages in 2007 and 2008. The results indicate that growth stages negatively affect hyperspectral indices in different ways in modeling leaf N concentration (LNC), plant N concentration (PNC) and plant N uptake (PNU). Published hyperspectral indices showed serious limitations in estimating LNC, PNC and PNU. The newly proposed best 2-band indices significantly improved the accuracy for modeling PNU (R2 = 0.75–0.85) by using the lambda by lambda band-optimized algorithm. However, the newly proposed 2-band indices still have limitations in modeling LNC and PNC because the use of only 2-band indices is not fully adequate to provide the maximum N-related information. The optimum multiple narrow band reflectance (OMNBR) models significantly increase the accuracy for estimating the LNC (R2 = 0.67–0.71) and PNC (R2 = 0.57–0.78) with six bands. Results suggest the combinations of center of red-edge (735 nm) with longer red-edge bands (730–760 nm) are very efficient for estimating PNC after heading, whereas the combinations of blue with green bands are more efficient for modeling PNC across all stages. The center of red-edge (730–735 nm) paired with early NIR bands (775–808 nm) are predominant in estimating PNU before heading, whereas the longer red-edge (750 nm) paired with the center of “NIR shoulder” (840–850 nm) are dominant in estimating PNU after heading and across all stages. The OMNBR models have the advantage of modeling canopy N status for the entire growth period. However, the best 2-band indices are much easier to use. Alternatively, it is also possible to use the best 2-band indices to monitor PNU before heading and PNC after heading. This study systematically explains the influences of N dilution effect on hyperspectral band combinations in relating to the different N variables and further recommends the best band combinations which may provide an insight for developing new hyperspectral vegetation indices.  相似文献   

15.
The objective of this study was to investigate the entire spectra (from visible to the thermal infrared; 0.390–14.0 μm) to retrieve leaf water content in a consistent manner. Narrow-band spectral indices (calculated from all possible two band combinations) and a partial least square regression (PLSR) were used to assess the strength of each spectral region. The coefficient of determination (R2) and root mean square error (RMSE) were used to report the prediction accuracy of spectral indices and PLSR models. In the visible-near infrared and shortwave infrared (VNIR–SWIR), the most accurate spectral index yielded R2 of 0.89 and RMSE of 7.60%, whereas in the mid infrared (MIR) the highest R2 was 0.93 and RMSE of 5.97%. Leaf water content was poorly predicted using two-band indices developed from the thermal infrared (R2 = 0.33). The most accurate PLSR model resulted from MIR reflectance spectra (R2 = 0.96, RMSE = 4.74% and RMSE cross validation RMSECV = 6.17%) followed by VNIR–SWIR reflectance spectra (R2 = 0.91, RMSE = 6.90% and RMSECV = 7.32%). Using thermal infrared (TIR) spectra, the PLSR model yielded a moderate retrieval accuracy (R2 = 0.67, RMSE = 13.27% and RMSECV = 16.39%). This study demonstrated that the mid infrared (MIR) and shortwave infrared (SWIR) domains were the most sensitive spectral region for the retrieval of leaf water content.  相似文献   

16.
Fuzzy based soft classification have been used immensely for handling the mixed pixel and hence to extract the single class of interest. The present research attempts to extract the moist deciduous forest from MODIS temporal data using the Possibilistic c-Means (PCM) soft classification approach. Temporal MODIS (7 dates) data were used to identify moist deciduous forest and temporal AWiFS (7 dates) data were used as reference data for testing. The Simple Ratio (SR), Normalized Difference Vegetation Index (NDVI), Soil Adjusted Vegetation Index (SAVI), and Transformed Normalized Difference Vegetation Index (TNDVI) were used to generate the temporal vegetation indices for both the MODIS and the AWiFS datasets. It was observed from the research that the MODIS temporal NDVI data set1, which contain the minimum number of images and avoids the temporal images corresponding to the highest frequency stages of onset of greenness (OG) and end of senescence (ES) activity of moist deciduous forest have been found most suitable data set for identification of moist deciduous forest with the maximum fuzzy overall accuracy of 96.731 %.  相似文献   

17.
This study aims to develop and propose a methodological approach for montado ecosystem mapping using Landsat 8 multi-spectral data, vegetation indices, and the Stochastic Gradient Boosting (SGB) algorithm. Two Landsat 8 scenes (images from spring and summer 2014) of the same area in southern Portugal were acquired. Six vegetation indices were calculated for each scene: the Enhanced Vegetation Index (EVI), the Short-Wave Infrared Ratio (SWIR32), the Carotenoid Reflectance Index 1 (CRI1), the Green Chlorophyll Index (CIgreen), the Normalised Multi-band Drought Index (NMDI), and the Soil-Adjusted Total Vegetation Index (SATVI). Based on this information, two datasets were prepared: (i) Dataset I only included multi-temporal Landsat 8 spectral bands (LS8), and (ii) Dataset II included the same information as Dataset I plus vegetation indices (LS8 + VIs). The integration of the vegetation indices into the classification scheme resulted in a significant improvement in the accuracy of Dataset II’s classifications when compared to Dataset I (McNemar test: Z-value = 4.50), leading to a difference of 4.90% in overall accuracy and 0.06 in the Kappa value. For the montado ecosystem, adding vegetation indices in the classification process showed a relevant increment in producer and user accuracies of 3.64% and 6.26%, respectively. By using the variable importance function from the SGB algorithm, it was found that the six most prominent variables (from a total of 24 tested variables) were the following: EVI_summer; CRI1_spring; SWIR32_spring; B6_summer; B5_summer; and CIgreen_summer.  相似文献   

18.
This paper examines the use of canopy reflectance for different units of measurements of carotenoids estimation. Field spectral measurements were collected over cotton in different intensive field campaigns organized during the growing seasons of 2010 and 2011. Three units of measurement were evaluated carotenoids expressed as a mass per unit soil surface area (g/m2), a mass per unit leaf area (μg/cm2), and a mass per unit fresh leaf weight (mg/g), respectively. Four methods were compared to retrieve amount of carotenoids: stepwise multiple linear regression (SMLR), published spectral indices, band combination indices, and partial least square regression (PLSR). Results show that maximum sensitivity of reflectance to variation in different units of measurement of carotenoids was found in the green region at 515–550 nm, and at 715 nm and 750 nm regions in the far-red wavelengths. The predictive accuracies of Car (g/m2), Car (μg/cm2) and Car (mg/g) were tested on a validation data set and the results show that the highest R2 values between estimations and observations were 0.468 for Car (g/m2), 0.563 for Car (μg/cm2), and 0.456 for Car (mg/g), with relative root mean square error (RMSE%, RMSE/mean) of 48.72%, 22.07% and 21.07%, respectively. Compared to Car (g/m2) and Car (mg/g), the model performance indices for Car (μg/cm2) show a high degree of consistency among the R2 values and RMSE% and MAE% values. Further comparison were performed among the estimation accuracies of different unit carotenoids and among the different approaches used in the study by a paired-t-test. The results indicate that although the best estimation results for Car (μg/cm2) and Car (mg/g) were both obtained based on PLSR, they can be estimated by all four adopted methods without significant differences (P > 0.1). Whereas for Car (g/m2), the best estimation results were obtained based on published vegetation indices CIred-edge, which were significantly better than the estimation results based on SMLR (P < 0.000). In summary, the results of this study show that even the carotenoids expressed on concentration (mg/g) or content (μg/cm2) basis at leaf level can be estimated with the same prediction accuracies to the carotenoids expressed as a mass per unit surface area (g/m2) at canopy level using reflectance measurement at canopy level.  相似文献   

19.
Ground-based vegetation monitoring methods are expensive, time-consuming and limited in sample size. Aerial imagery is appealing to managers because of the reduced time and expense and the increase in sample size. One challenge of aerial imagery is detecting differences among observers of the same imagery. Six observers analysed a set of 1-mm ground sample distance aerial imagery for graminoid species composition and important ground-cover characteristics. Kendall's coefficient of concordance (W) was used to measure agreement among observers. The group of six observers was concordant when assessed as a group. When each of the observers was assessed independently against the other five, lack of agreement was found for those graminoid species that were difficult to identify in the aerial images.  相似文献   

20.
The direct estimation of nitrogen (N) in fresh vegetation is challenging due to its weak influence on leaf reflectance and the overlaps with absorption features of other compounds. Different empirical models relate in this work leaf nitrogen concentration ([N]Leaf) on Holm oak to leaf reflectance as well as derived spectral indices such as normalized difference indices (NDIs), the three bands indices (TBIs) and indices previously used to predict leaf N and chlorophyll. The models were calibrated and assessed their accuracy, robustness and the strength of relationship when other biochemicals were considered. Red edge was the spectral region most strongly correlated with [N]Leaf, whereas most of the published spectral indexes did not provide accurate estimations. NDIs and TBIs based models could achieve robust and acceptable accuracies (TBI1310,1720,730: R2 = 0.76, [0.64,0.86]; RMSE (%) = 9.36, [7.04,12.83]). These models sometimes included indices with bands close to absorption features of N bonds or nitrogenous compounds, but also of other biochemicals. Models were independently and inter-annually validated using the bootstrap method, which allowed discarding those models non-robust across different years. Partial correlation analysis revealed that spectral estimators did not strongly respond to [N]Leaf but to other leaf variables such as chlorophyll and water, even if bands close to absorption features of N bonds or compounds were present in the models.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号